Nano-Scale Materials, Materials Processing and Genomic Engineering
Heftet /
2014
/ Engelsk
Produktdetaljer
ISBN
9783038350897
Publisert
2014-06-09
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1200 gr
Høyde
240 mm
Bredde
170 mm
Dybde
34 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
688
Collection of selected, peer reviewed papers from the 12th IUMRS International Conference on Advanced Materials (IUMRS-ICAM 2013), September 22 -28, 2013, Qingdao, China.
The 110 papers cover the current knowhow in: Nano-Scale Materials;
Amorphous Materials;
Advanced Fibers and Nano-Composites; Advanced Materials Processing;
Surface Coating and Technology;
Materials Modeling and Simulation;
Materials Characterization and Evolution.
Les mer
Selected, peer reviewed papers from the 12th IUMRS International Conference on Advanced Materials (IUMRS-ICAM 2013), September 22 -28, 2013, Qingdao, China
- Preface, Organizers and Supporters
- Nano-Scale Materials
- Fabrication and Characterization of Integrated Ultrahigh-Density Pt Nanowire Arrays within the AAO Template
- Stability of Nanofluids for Heat Pipe
- Polyaniline Grafted Amino-Functionalized Graphene Nanocomposite with Excellent Electrochemical Performance for Supercapacitor Electrode Materials
- Solid-State Synthesis and Thiophanate Methyl Visible Light Degradation of Magnesium Doped TiO2 Mesoporous Nanomaterial
- Effect of Dysprosium Content on the Magnetic Properties of Nanocrystalline (Pr0.25Nd0.75)10-xDyxFe82Co2B6 Alloys
- Fabrication of Microfibrous Patterns via Electrospinning
- Preparation of 1D or 3D Nano ZnO Crystals in High-Viscosity Solvent
- Effect of the Ce-TiO2/Diatomite on the Photo-Catalysis Degradation of MB
- Amorphous Materials
- Effect of Aging Temperature on Microstructure and Hardness of CoCrFeNiTi0.5 High Entropy Alloy
- Microstructure and Properties of Ni70.2Si29.8 Eutectic Alloy Produced by Directional Solidification
- Fe-Based Bulk Metallic Glass with Good Soft Magnetic Properties
- Hardness Regulation of Fe-Based Amorphous Composite Coatings by Laser Remelting
- Influence of Laser Remelting on the Corrosion Resistance of Fe-Based Amorphous Composite Coatings
- Microstructural Evolution and Hardness of CoxCrCuFeNi High-Entropy Alloys
- Research of Crystallization Kinetics and Thermal Stability of W48.5Ni34Fe14.6B2.9 Amorphous Ribbons
- Advanced Fibers and Nano-Composites
- TEMPO-Mediated Oxidation of Bacterial Cellulose in Buffer Solution
- Facile Preparation of Gradient Structure Bacterial Cellulose Using Potato Starch
- Preparation and Properties of Cotton Fiber/Poly(lactic acid) Composites
- Effect of Two-Step Treatments on Interfacial and Mechanical Properties of Sugarcane Rind Fiber/Natural Latex Biodegradable Composites
- Anti-Corrosive Epoxy Primer Modified with Nano Particles
- Preparation and Characterization of TPU Toughened PLA Elastic Fibers
- Preparation and Biological Characterization of Electrospun Aligned Poly(butylene carbonate) Nano-Fibers
- Fabrication and Properties of Porous Scaffolds of PLA-PEG Biocomposite for Bone Tissue Engineering
- Preparation and Characterization of Ethylene-Octene Copolymer/Modified Nanosilica Composites by Radiation Processing
- Morphology Control of Polyimide Fibers by Phase Separation under Different Coagulation Bath Conditions
- Improving Preferred Orientation and Mechanical Properties of the PAN-Based Carbon Fiber Precursors by Using Saturated Steam Stretching Process
- Facile Fabrication of Super-Hydrophobic Surface on Aluminum and its Effects in Accelerating Underwater Bubble Bursting
- Raman Spectroscopy Studies on the Microstructure Evolution from Cellulose to Carbon Fiber
- Design of ACF Microwave Absorbing Composites with Triangle Patches and Circular Aperture Elements
- Study on the Properties of Melamine Cyanurate Modified Polyamide 6 Nanocomposites with Different Dimensional Siliciferous Particles
- Preparation and Properties of Recycled-Polyester Nanocomposite Fibers Synergistic Modified with Phosphorus Containing Flame-Retardant and α-Zirconium Phosphate
- Study of the Hydrophobic Properties of the Surface of an Enamel Material
- Preparation and Properties of BC/PPy/TiO2 Composite Membrane
- Cellulose Nanofiber-Supported Polyaniline Nanocomposite Conductive Film and its Conductive Properties
- Glutaraldehyde-Cross-Linked Poly(acrylic acid-co-acrylamide)/Poly(vinyl alcohol) Superabsorbent Membranes
- Preparation and Characterization of Poly(vinylidene) Fluoride Membranes Reinforced by Modified Nano-SiO2 Particles
- Preparation and Characterization of Polyacrylonitrile Membranes with High Strength via Thermally Induced Phase Separation Process
- Application of Orthogonal Design on Optimization of Spinning Conditions for BTDA-TDI/MDI Ternary Copolyimide Fiber
- Preparation and Characterization of Polyacrylonitrile in Aqueous Slurry Polymerization
- Study on Poly(Ether Imide)/Amino-Modified Sillica Hybrid Membranes
- Strontium-Substituted Hydroxyapatite Nanocrystals Synthesized in Ultrasonic Field: Use for Protein Adsorption
- A Novel Method for the Synthesis of Amphiphilic Copolymer: PHEMA-b-PDMS-b-PHEMA
- Synthesis of Allyl Functionalized Telechelic PVP by Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization
- Effect of Additive on the Performance of PVDF Membrane via Non-Solvent Induced Phase Separation
- Study on Preparation and Property of High Thermal Oxidation Stability PPS/SiO2 Fiber
- Study on Spinnability of UHMW/PAN Dope in DMSO
- Fabrication of Polyvinylpyrrolidone/Boehmite Nanofibers by Electrospinning
- The Effect of Bacterial Cellulose (BC) Fiber Content on the Properties of BC Fiber Reinforced Nanocomposites
- Advanced Materials Processing
- Preparation and Study on Nano-Ag/SnO2 Electrical Contact Material Doped Rare Earth Element
- Effects of Cold Rolling Reduction on Deformation Modes in Mg-3Al-1Zn Magnesium Alloy
- Study on the Flow Field of Friction Stir Welding of AZ31 Magnesium Alloy Based on the Temperature Variation
- Effect of Brazing Flux Pb on Microstructure and Mechanical Property of CMT Weld-Brazed Lap Joint of 5052 Aluminum Alloy to Galvanized Q235 Steel
- Influences of Carbon and Nitrogen Content on the Precipitation of 18Cr18Mn Steel
- Study on Pack Rolling and Annealing Process for Ultra-Fined Grain Austenite Stainless Steel
- Effect of Deformation Ratio on Microstructures and Properties of High Nitrogen Martensitic Stainless Steel
- Microstructure Evolution in Isothermal Heat Treatment of 0Cr32Ni7Mo4NDuplex Stainless Steel
- Effects of Melt Cyclical Superheating Conditions on the Microstructure of FeSi2 Alloy
- Microstructure and Mechanical Properties of Cold-Rolled Mg-6Al-1Zn Alloy Strip Treated by Electropulsing Treatment
- Recrystallization and Precipitation of β-Mg17Al12 Phase of the Cold-Rolled Mg-9Al-1Zn Alloy Strip during Isothermal Annealing
- Sliding Wear Behavior of Forged, Uncoated and Laser Nitrided LMD TC18 Titanium Alloy
- Investigation on Micro Components Fabricated by Micro Powder Injection Molding
- Effect of Temperature on Low Energy Consumption Electrolytic Preparation of Manganese Dioxide Using Oxygen Depolarized Electrode
- Hydrodynamic Lubrication during Non-Sinusoidal Oscillation for a Continuous Casting Mould
- Physical Properties, Compatibility and Morphology of Hydrogenated Nitrile Rubber/Fluoroether Rubber Blends
- Electron Beam Additive Manufacturing and its Applications in Aerospace Field
- Microstructure and Mechanical Properties of Brazed Tungsten/Steel Joint for Divertor Applications
- Investigation on the Micro-Structures and Properties of the P20 Steel Surface after Electrical Discharge Machining
- Development and Application of Multivariable Composite Controller Based on Fuzzy Switching for Ultra Fast Cooling System
- Effect of Ti Content on the Microstructure and Properties of TiC/TiB2-FeNiCr Composite Prepared by Thermite Reaction
- Hot Compression Deformation Behaviors and Microstructure Evolution for Brittle Au-20Sn Eutectic Alloy
- Magnetic Properties of Cyano-Bridged Compound Co [Fe(CN)5NO]·5H2O
- Magnetic and Mössbauer Studies on Mixed-Metal Cyano-Bridged Compounds GunM1.5-n[Fe(CN)6]·xH2O(M=Ni, Gu)
- Microstructure and Mechanical Properties of Plasma Arc Welding Joint for Laser Melting-Deposited AerMet100 Ultrahigh-Strength Steel
- Fabrication of Cu Heat Sink on Silicon Substrate Using Direct Laser Sintering
- Microstructure Evolution of Laser Direct Deposited Ti-5Al-2Sn-2Zr-4Mo-4Cr Titanium Alloy
- Surface Coating and Technology
- Preparation of MAO Ceramic Coating on Ti-6Al-4V Alloy Surface
- Properties of TiAl/TiAlN/TiAlCN Films Deposited by Arc Ion Plating on GCr15 Rings
- Microstructure, Mechanical and Tribological Properties of the Tialn Coatings after Nb and C Dual Ion Implantation
- Laser Ablation Resistance Behavior of Organosilicone Composite Coating on Various Substrates
- Effect of CO2 on Anti-Corrosion Property of a Polyurea Coating Modified with Organosilicone
- Progress in Novel Composite Thermal Barrier Coating
- Assessment of Mobilities of the B2 Phase in the Nickel-Chromium-Aluminum System
- Diffusion Behavior of Interface between 6061 Aluminum Substrate and Ni–5wt.%Al Coating
- Electrochemical Impedance Spectroscopy (EIS) Study of Nano-Composite Polyurea Coating under the Wet-Dry Cyclic Conditions
- Investigation of Morphology and Electrical Properties of Contact Materials after Airtightness Test
- Research and Application Status of Atmospheric Plasma Spray Torch in Internal Feedstock Mode
- Microstructure and Properties of Zirconia Co-Doped with Yttria and Cenosphere Coating Prepared by Air Plasma Spraying
- SHS Reactive Arc Spray - A New Method to Prepare Multiphase Ceramic Coatings
- Anti-Ablation Property of MoSi2 Coatings Deposited by APS
- Materials Modeling and Simulation
- Microscopic Phase Field Study on the Kinetics of Order-Disorder Transition of APDBs Formed between DO22 Phases during Stress Aging
- Molecular Dynamics Simulation of Porous Layer-Induced Stress in α-Iron Single Crystal and Twin Crystal
- Helium Diffusion in Tungsten Studied by Molecular Dynamics Method
- Multiple Helium Atoms Diffusion in Tungsten: A Molecular Dynamic Simulation
- Modeling of Flow Fields of Different Delivery Chamfers in Spray Forming Process
- Prediction Model of Pressure Distribution under Floating Strips
- FEM Analysis of the Deformation Behavior at Thickness Direction in Laboratory Plate Hot Rolling
- Prediction of the Hardness of Cu-3Ti-1Cr Alloy Using Least Square Support Vector Machines
- Prediction Model for Adhesive Thickness-Dependence of Bonding Structures for Aeronautic Lightweight Alloy
- Application of Dynamic Deadband Eccentricity Filter in GM-AGC System
- A Calculation Model of Carbon Diffusion Coefficient in the Austenite for Spheroidal Graphite Cast Iron
- Design and Realization of the Process Tracking System for Plate Plant
- Macroscale Modeling of Multi-Physics Fields during Vacuum Arc Remelting of Ti-6Al-4V
- Crystal Plasticity Finite-Element Simulation of Single Phase Titanium Alloy with 3D Polycrystalline Models
- Materials Characterization and Evolution
- Compression Property of C/SiC and Inconel X-750 Springs from Room Temperature to 1000°C
- Electrochemical and Salt Spray Corrosion Behavior of Copper Alloy Contact Wires in Chloride Solution
- Fractographical Investigation on High-Cycle Fatigue Behavior of Direct Aging GH4169 Superalloy
- Study on Corrosion Resistance of Several Fe-Based Amorphous Alloys
- Synthesis and Characterization of Itaconic Acid Doped Polyaniline Nanorods
- Synthesis and Characterization of Monodisperse and Micro-Structured Polyaniline by Soap-Free Emulsion Polymerization
- Effect of Two Heat Treatment Processes on Microstructures and Tensile Behaviors of Ni-Based Superalloy K465
Les mer
Produktdetaljer
ISBN
9783038350897
Publisert
2014-06-09
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1200 gr
Høyde
240 mm
Bredde
170 mm
Dybde
34 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
688