Collection of selected, peer reviewed papers from the 2014 International Conference on Vehicle, Mechanical and Electrical Engineering (ICVMEE 2014), November 29-30, 2014, Wuhan, China. The 187 papers are grouped as follows:
Chapter 1: Vehicle Engineering and Design;
Chapter 2: Traffic and Transport Engineering, Vehicle and Road Safety;
Chapter 3: Mechanical and Dynamical Principles and Design, Machinery and Manufacturing Engineering;
Chapter 4: System Modeling and Algorithms for Intelligent Automation and Control Systems;
Chapter 5: System Test, Diagnosis, Detection and Monitoring, Instrumentation and Measurement, Optimization and Algorithms, Numerical Methods and Simulation;
Chapter 6: Electrical and Electronic Technology, Power System Engineering;
Chapter 7: Communication for Vehicles and Transportation, Signal Processing;
Chapter 8: Information Technology and Networks Applications;
Chapter 9: Recognition, Video and Image Processing;
Chapter 10: Materials for Vehicles and Transportation, Civil Constructions, Fuel Cells and Energy Materials
- Preface, Committees and Sponsors
- Chapter 1: Vehicle Engineering and Design
- Reverse Optimization Algorithm of CVT‘s Energy Economy
- Hybrid Mobile Power Supply Using PEMFC and Lithium Battery
- The Research and Design on the Electric Vehicles’ Centrifugal Automatic Transmission
- Design on a Collision Warning and Vehicle-Headlights Intelligent Switching System
- Study on the Closed-Loop Control Strategy of Voltage for Pure Electric Vehicle in Limp Mode
- Performance Analysis of a Pure Electric Light Off-Road Vehicle Based on the Cruise
- FSAE Race Car Engine Options on the Impact of Vehicle Design
- Based on CATIA Car Side Welding Fixture Design and Research
- Chapter 2: Traffic and Transport Engineering, Vechicle and Road Safety
- Effects of Traffic Calming Measures on Vehicle Speed Control and Road Safety
- Violation Behavior Analysis of Pedestrian and Non-Motorized Vehicle
- The Study of Traffic Rules Based on Cellular Automata Traffic Wave Model
- The Overall Structure of IOV and the Research of the Unsolved Key Technology of IOV in Intelligent Transportation System
- Vehicle Routing Problem Based on Heuristic Artificial Fish School Algorithm
- An Improved Cellular Automaton Model of Traffic Regulations and the Effect of Deceleration Probability
- Smoke Management System Design for Airport Terminal
- Chapter 3: Mechanical and Dynamical Principles and Design, Machinery and Manufacturing Engineering
- Influence of Guide Vane Wrap Angle Key Design Parameters on Hydraulic Performance of Nuclear Reactor Coolant Pump
- Numerical Investigation on the Flow in Tip Clearance of the Last Three Stages of Industrial Steam Turbine
- A Simplified Model of Semi-Open Impeller Stage and Analysis of its Effects on the Transient Flow
- Dynamic Analysis and Optimization of Pivot Points of Telescopic Jib Based on Genetic Algorithm
- Development of Testing Machine for Measuring Unsteady State EHL Film under Heavy Load
- Finite Element Analysis of Z-Shaped Pipe in the Directly Buried Heat-Supply Pipeline with Large Diameter
- Multiple Weibull Statistical Model of Random Censored Data of NC Machine Tools and Optimal Estimation of Parameters
- Controllable of Underwater Towing Tension Passive Compensation Device Design Research
- Engineered-Based Machining Parameters Analysis for Aircraft Structural Parts
- Parametric Design of Deep Groove Ball Bearing Based on Pro/Program and Family Table
- Parameter Study of Opposite Tape-Spring Flexure Hinge
- Research on the Methods for Common-Rail Pipe Holes Abrasive Flow Machining
- Intermediate Slabs and Optimization in Forging Process of Balance Elbow by FEM
- Analysis of Hydroelectric Unit’s Upper Bracket Based on Test and FEM
- The Optimization Method of Tailor Welded Blank Forming Process Based on Numerical Simulation
- Research on Gear Mesh Misalignments under the System Deformation
- Applying Multi-Objective Particle Swarm Optimization to Maintenance Scheduling for CNC Machine Tools
- On the Axisymmetrical Dissemination of Glycerine Driven by Shock Wave
- Static Stiffness Analysis of High Stiffness Rotary Hinge Locking Mechanism for SAR Antenna
- Research on the Variable Ratio Gear Modeling and Transmission Ratio Test Method of Rack and Pinion Variable Ratio Steering Gear
- Calculative Method for Critical Condition of Fire Liftoff Caused by Man-Made Interfering Jet Flow
- Trajectory Reconstruction Using Paper Target Experiment Based on UKF
- Performance Analysis of a Novel Compression Refrigeration System
- Numerical Study of Flow and Heat Transfer of Heat Exchanger with Louver Baffles
- Control and Analysis on Shot Peening Process to Aeropropeller Pitch Change Knob
- A New PANS Model for Unsteady Separated Flow Simulations
- FSAE Racing Gear Selection and Shifting Agencies Choose to Discuss the Impact of Car Drivers
- Modeling and Simulation of a New Type Intelligent Gas Pressure Regulator
- Calculation on Fracture Parameter of Model I Crack Tip Based on ANSYS
- Three-Dimensional Numerical Simulation of the Flow around Two Side-by-Side Cylinders of Different Diameters
- Chapter 4: System Modeling and Algorithms for Intelligent Automation and Control Systems
- Particle Swarm Optimization of PIλDμ Control of Heating Furnace Temperature Control System
- Self-Scheduled and Robust Control for Tilt Rotor Aircraft
- Mathematical Model of Obstacle Avoidance Shortest Time Path for Robot
- Synchronization Control of Chaotic Systems with Different Orders
- Research on Carrier-Attacker Control before Launching Air-Ground Guidance Weapons
- Control of Channel Power Compensation Based on Genetic Algorithm to Impairment Aware in Optical Network
- Study on Parametric Reverse Modeling
- Chaos Synchronization of Systems via Accelerated Factors
- Cooperative Output Regulation for a Class of Nonlinear Uncertain Multi-Agent Systems Using the Backstepping Method
- Simulation of Valve Position Feedback Mechanism Based on Pro/E and ADAMS
- Study on Single-Phase Grid-Connected Inverter Based on PI Control
- Intelligent Control of Time-Delayed System
- Applying LESO for Disturbance Rejection of Space Station
- Developing Fuzzy Control Irrigate System Based on PLC
- Greenhouse Moisture and Temperature Fuzzy Control System and PLC Program Design
- Anti-Synchronization Control of the Complex Lu System
- The Design of the Tiny-Skin Transplanter’s Pneumatic Control System
- An Improved Purging Control Algorithm for Small Power PEMFC
- The Research of Stamping Springback Compensation Algorithm Based on the Improved Fourier Transform
- Design and Simulation about Linkage of Caterpillar Beach Cleaner’s Graps
- Research on Big Data Consistency Algorithm of Multi-Sensor Fusion
- The Research of Loyalty Model Based on the PN (Petri Net) Algorithm
- The Research of Rapid Construction Method of Kinematics Coordinate System from a Kind of Mobile Robot
- Study on the Energy Management System of Electric Vehicle Charging Station Based on Multi-Agent System
- Research on Drive Control and Safety Management Strategy for Electric Vehicle
- Study on Control Strategy for Electric Starting up of Pure Electric Vehicle
- Study on the Control Strategy of Slope Starting for Pure Electric Vehicle
- Research on the Design and Manufacture of Steam Cleaning Machine Based on PLC
- The Design Method for Sequence Function Chart in Drilling Machine Control System
- The Control Design of the Chain Magazine Test Bench
- Design of Foil-Making Machine Based on Motion Controller
- Optimization Research on the Circuit Breaker Instantaneous Characteristic Experiment Based on Neural Network
- Analysis on Composite Action Control Strategy of Separate Meter-In Separate Meter-Out Control System
- A Design and Implementation for the Auto-Booting of Baseband Board with ARM, DSP and FPGA
- Chapter 5: System Test, Diagnosis, Detection and Monitoring, Instrumentation and Measurement, Optimization and Algorithms, Numerical Methods and Simulation
- Reliability Evaluation for Distribution System Considering the Access of Distributed Generations
- Transformer Fault Diagnosis Based on Online Sequential Extreme Learning Machine
- Analysis of a Nonlinear System with a Random Parameter
- The Research on Flow Calculation Method of the Ball Solenoid Valve
- Reflection Plane Precision Measuring Methods Research of Shipborne Measurement and Control Antenna
- Echo Doppler Fidelity’s Verification of Radar Simulator
- About Several Kinds of Probe on the Impact of Different Failure Modes on Inspection Speed Analysis
- Design of Light Moisture Tester and its Application in Tiefa Coal Industry Group
- Numerical Analysis of Buried Heating Branch Junctions
- Fault Prediction of Pitch Actuator for Wind Turbines
- Vivid Algorithm of Scene Simulation for URAV
- A New INS/VNS Integrated Navigation Model for Planetary Rovers
- Optimum Sensor Array for Passive Localization from Time Differences of Arrival
- Smoke Detection Alarm System Based on NRF401 and FPGA
- Road Flatness Detection Using Permutation Entropy (PE)
- Analysis of Natural Pollution Deposit on Optic Sensor for Monitoring of Insulator Contamination
- Comprehensive Evaluation of the Designing Scheme of AUV Platform Performance by AHP Method
- Data Prediction Algorithm in Wireless Sensor Networks for Oil and Gas Pipeline Monitoring
- The Research on Central Monitoring System for Wind Farm
- Ultrasonic Transceiver-Based Structural Deformation Monitoring with Location Ability
- Lunar Soft - Landing Trajectory of Mechanics Optimization Based on the Improved Ant Colony Algorithm
- Chaos Research of Asymmetric System Based on Melnikov Method
- The Design and Experiment of Levelness-Adjustable Clamping Device for Cable Gland
- Large-Scale Virtual Simulation of the Solar System Based on Java3D
- The Effect of Different Optimization Methods on Robustness for Robust Optimization Design
- Modeling and Simulation Research of Lidar Tomography Imaging
- Researching on Characteristics of Rayleigh Waves
- Evaluation Framework and Method of the Intelligent Behaviors of Unmanned Ground Vehicles Based on AHP Scheme
- Fracture Research on Preheating Installation of Directly Buried Heating Return Water Pipe with Large Diameter
- The Electric Monitoring System Application Based on ZigBee Wireless Technology
- Research on Magnetometer Positioning Technology Based on a Variable Magnetic Source
- A Method of Order Determination for ARX and ARMA Models Based on Nonnegative Garrote
- Research on Jamming Resource Scheduling Based on Multi-Target and Fuzzy Multi-Stage
- The Design and Implementation of a Certain Type of Information Machine Simulator Based on ARM
- PSO Based Feature Extraction Method for Analog Circuits Fault Information
- A Precision Resistance Generator for the Calibration of RTD-Based Temperature Instruments
- Research on Identification of Induction Motor Parameters Based on Nameplate Data
- Research on Wireless Temperature Measurement System for Electrical Equipment
- The Design of Mobile Phone Multimeter Based on the Android Platform
- Application of the Bat Algorithm to Optimize the BP Neural Network
- An Algorithm to Find the First K Spanning Trees with Minimum Weights
- The Multi-Site Joint Operation Method Based on Discharge Gate Ant Colony Algorithm
- A Novel and Improved Apriori Algorithm
- Algorithm for Computing Attribute Reduction Based on Radix Sort of Optimized Linked List Structure
- Chapter 6: Electrical and Electronic Technology, Power System Engineering
- Impact of DLC on Distribution System Reliability
- Doherty Power Amplifier with Dynamic Power Dividing Network for Enhanced Efficiency
- The Design of the Minimum CPU System of TMS320VC54x
- Research on Simulation of Electronic-Protection Circuit of Chopper Cascade Speed Control System
- A Kind of Electric-Corona-Prevent Paint
- Research on High-Power, High-Speed Laser Modulation and Enlarge Experiment
- PV Grid-Connected Inverter Islanding Detection Algorithm Improvements
- Summary of Research Status of Active Power Filter
- Based on Class D Amplifier Magnetic Resonance Wireless Transmission Technology
- Application Research of Electrical Automation Technology for Power Plant
- Research on the Key Factors of Mis-Operations and Correct Operations of the Residual Current Operated Protective Device
- Research and Application of UPS-CAN Protocol in Parallel System
- Selective Harmonic Elimination PWM Technique with Walsh Functions for Nine-Level Cascade Inverter
- An Active Equalization Technique Based on Flyback Converter Topology
- Development and Research of MEMS
- Capacitive Touch Sensing Principle and Application in the Car
- Microcomputer Interface Experimental System Design
- The Model of Estimating MTL Crosstalk in Inhomogeneous Medium
- Research on Four Water-Filling Power Distribution Schemes in MU-MIMO System
- Design of Electronic Control System for HCCI Optical Engine and Optical Testing
- Chapter 7: Communication for Vehicles and Transportation, Signal Processing
- Discussion on the Technology Application of OFDM in the Ad-Hoc Network of Unmanned Aerial Vehicle (UAV)
- A Novel Anti-Collision Algorithm of Tags in RFID System
- Design Method of an Intermediate Transcoding Structure Based on XML
- An Effective Multiple-Receiver SAS Range Doppler Algorithm Based on the Modified Range History Approximation
- The Study on DFS Algorithm of Unmanned Aerial Vehicle Platform Communications Relay System
- Method of Common View Based on Digital Satellite Television
- Modulation Type Recognition of OFDM Signals Based on EMD
- Network-Coding-Based Mutually Cooperative Transmission in Deep Space Communications
- Research on Near Space Optical Communication Transmitting and Receiving Technology
- Chapter 8: Information Technology and Networks Applications
- Software Defined Networking: A New Trend of Networking
- Integrated Avionics Network Dynamics Analysis
- High Performance Start Node of Edge Ordering for Infrastructure Networks
- The Design of the Power Energy Management System Based on Wireless Sensor Network
- The Applications of Information Visualization in Power Systems
- The Application of Communication Network in Distribution Automation
- The Application of Distribution GIS in Regional Distribution Network
- Multi-Objective Programming Model for Joint Scheduling of Ships in the Complex Water Network
- Research on Energy Saving in Cellular Networks Based on Dynamic Load Balancing
- Application of Process Migration in Intelligent Router Based on BLCR
- Channel Assignment Algorithm in Centralized WLAN
- Integrity and Privacy Preserving Data Aggregation Algorithm for WSNs
- A Study of the Model which Can Improve LEACH Protocol
- Power Control Optimization for Position Tracking in Vehicle Network
- An Optimized Design of Safety Messages’ Communication Sub-Layer in Vehicle Ad-Hoc Network
- RETRACTED: Visualizing Interrupts and Replication with Timer
- Chapter 9: Recognition, Video and Image Processing
- An Effective Program Clustering Algorithm for TV Recommendation System
- The Application of Gaussian Mixture Modeling in Traffic Flow Videos
- Research on Locality Preserving Discriminant Projection Algorithm Based on Gabor for Face Expression Recognition
- Design and Algorithm Optimization of P2P Mobile Monitoring Network-Based Facial Recognition System
- Rotation Moment Invariant Feature Extraction Techniques for Image Matching
- The Application of Improved PSO Algorithm in PMMW Image OSTU Threshold Segmentation
- A Robust Line Filter for Automatic X-Ray/CT Image Segmentation
- The Research Based on H.264 Embedded Video Systems of Optimized Compression Algorithm
- Chapter 10: Materials for Vehicles and Transportation, Civil Constructions, Fuel Cells and Energy Materials
- Effect of Ce on Secondary Extrusion Deformation Microstructure of ZM21 Alloy
- Effects of Zn on Microstructure and Mechanical Properties of Mg-6.0Zn-0.6Zr-1.0Y Magnesium Alloys
- Influence of Laminate Scheme on Design of Continuous Fiber Reinforced Composite Turbofan Engine Shaft
- Analysis of Tunnel Running through Bridge Pile Foundation Based on the MIDAS/GTS
- Influences of Ground Reflection on the Elevated Box Bridge Structure Noise
- Acoustic Properties of Magnetorheological Fluids under Magnetic Fields
- Synthesis and Photoelectric Properties of Donor-Acceptor-Donor Molecule Containing Perylene Diimide
- Preparation and Properties of SiO2-P2O5-TiO2 Membrane for Fuel Cell Electrolytes
- Analysis of Resistance of Current Collector in Packing-Type Microbial Fuel Cell
- Vibrating Rechargeable Battery Design Research Based on the Two Kinds of Charging Ways
- Collision Simulation and Analysis of Energy-Absorbing Box for Vehicle