PrefaceFoundation of the Standard Curve Database for Quantitative Analysis by Internal Standard Method Based on XRDSynthesis and Characterization of CoO2 NanosheetsSynthesis, Structure and Properties of Super Fine LiMn2O4Formation Mechanism of SrBi2Nb2O9 Prepared by Melting Salt MethodDetermination of Heavy Metals in Inorganic Materials by XRFParticle Shape Characterization of Inorganic Powders by SEM and Image AnalysisDetermination of Particle Size Distribution of Nano-TiO2 Coating Film by AFM and Image AnalysisApplication of Raman Spectroscopy on Size Driven Phase Transition in Bismuth TitanateMechanochemical Synthesis and Characteristics of Pb(Mg1/3Nb2/3)O3ZnFe2O4 Modified by Fe(NO3)3 for the Synthesis of Ionic FerrofluidsXRD Study on D-Values of Modified PbTiO3 Ceramics during Poling ProcessApplication of X-Ray Diffraction at the Study on the Preparation and Structure of α-Al2O3 NanocrystalEffect of the Acidity on the Morphology and Composition of Nano-TiO2/ Cu ParticlesEffect of Severe Plastic Deformation on Microstructures and Properties of AgCuO CompositesSol-Gel Preparation, Characterization and Photocatalytic Activity of Co Doped Nano-TiO2Nanostructure of a Glass-Like Carbon Characterized by X-Ray Diffraction and Electron Energy Loss SpectroscopyNovel Phase Transformation Phenomenon of Potassium Teteratitanate Nanofibres Synthesized from H2TiO3Crystal Structure and Chemical Composition of BIMEVOX (ME=Mn)Analysis and Evaluation of the Comprehensive Property for Transparent Aluminum Oxynitride (ALON) CeramicsStructural Analysis of Multiphase La1-XSrxCo1-XFexO3-δCharacterization of Silicon Carbide Films Prepared by Chemical Vapor DepositionPreparation and Characterization of Titanate Nanotubes by Hydrothermal MethodEffect of Nitrogen Pressure on the Morphology of Combustion Synthesized β-Si3N4 CrystalsEffect of Compact Density on the Combustion Synthesizing Silicon Nitride CrystalsMicrostructure of TiC/Nb-Ni Cermets Cladding LayerPreparation and Characterization of La3+ Doped TiO2 Thin Films Derived by Innovative Ultrasonic-Sol-Gel MethodMethods for Determining the Interface Strength and Residual Stress of Laminated CeramicsShape Effects of Indenter on the Depth-Sensing IndentationEffect of Humidity on Delayed Propagation of Indentation Crack under Sustained Electric Field in Ferroelectric CeramicsEvaluation of Elastic Modulus and Strength of Glass and Brittle Ceramic Materials by Compressing a Notched Ring SpecimenHigh Temperature Wear of Ti3AlC2 Sliding against Al2O3Wear Behaviors of TiCN Cermet under Different Concentrations of Abrasive Slurries from Carborundum, Corundum and Silica SandsWear Behaviors of Cemented Carbide Cermet YG8B under Different Concentrations of Abrasive Slurries from Carborundum, Corundum and Silica SandsSolid Particle Erosion-Wear Behavior of Alumina Ceramics at High-TemperatureMicrostructure Transformation and Mechanical Properties of the Large-Bulk Solidified Al2O3-ZrO2 (Y2O3) Micro-Nanocrystalline Composites Prepared by Combustion Synthesis under High GravityEffects of Aging on the Mechanical Properties of Dental Pigmented 3Y-TZP CeramicsFracture Behavior of Silicon Carbide Measured by Different Test MethodsUltra-High-Hardness (Ti, W)C Matrix Metal Ceramics Prepared through Combustion Synthesis under High GravityInfluence of Substrate Hardness on Coating-Substrate AdhesionFracture Toughness of CNTs/AlN Ceramics Tested by IndentationMicrohardness of Various Bullet-Proof CeramicsHigh Temperature Creep Behavior of In Situ TiC/Ni CompositesFinite-Element Simulations of Residual Stresses Developed in Ti3AlC2 Diffusion Bonds with a Si InterlayerDEM Simulation of Machining Damage in SiC Pre-Stressing Cutting ProcessCracking Stress of Fiber-Eutectics and Transformation Particles Composite CeramicTwo Dynamic Fracture Problems Concerning Bridging Fiber Pull-Out of Composite MaterialsBridging Toughening Mechanism of Fiber Eutectics and Transformation Particles Composite CeramicEffective Elastic Constants of Fiber-Eutectics and Transformation Particles Composite CeramicBinding Performance of a Zirconia Framework Material and Veneering PorcelainElectrical Properties of ZnO Film Prepared by Thermal Oxidation MethodElectrical Properties and UV-Visual Spectra of (Na0.535K0.48) NbO3 Ceramics Doped with Bi2O3 and Fe2O3Electrical Characteristics and Microstructures of Eu2O3-Doped Bi4Ti3O12 Thin FilmsPreparation and Properties of Niobate Thin Films from NanosheetsFabrication and Piezoelectric Anisotropy of PFCsHigh Discharge Rate Lithium Ion Batteries with the Composite Cathode of LiFePO4/Mesocarbon NanobeadFerroelectric Properties and Microstructures of Pr6O11-Doped Bi4Ti3O12 Thin FilmsDepolarization Behavior of Lead-Free (Bi1/2Na1/2)TiO3-Based Ferroelectrics with Different Li+ Introduction SourcesDefects of GaAs Crystals Grown by the Pulling-Down MethodEffect of Sample Shape and Size on the Thermal Shock Resistance for Ultra-High Temperature CeramicsSintering Behavior of Ceramic Green Body by Thermal Analysis TechniquesSteady Thermal Stress in a Ceramic/FGM/Metal Composite EFBC Plate Considered Temperature DependencyFabrication of Silicon Nitride Ceramics with Magnesium Silicon Nitride and Yttrium Oxide as Sintering AdditivesThermal Dehydration Kinetic Mechanism of Aluminum Sulfate HydratesPreparation and Negative Thermal Expansion Property of ZrWMoO8Thermal Stability of CrAlN CoatingsAccuracy Research on the Measured Values of the Ceramic Material’s Normal Temperature Infrared EmissivityPreparation and Properties of Porous Barium FerriteComparative Study on Mn-Zn Ferrites by One-Step Synthesis and Conventional Two-Step SynthesisPreparation of Rare-Earth Permanent Magnetic Strontium Ferrite by Microwave Sintering ProcessStructure and Luminescence Characteristics of Yttrium Hydroxide Nanosheets Doped with Eu3+Microstructure and Luminance Properties of Integrated Translucent Alumina Tube Used in Metal Halide LampsLuminescence Properties of Eu2+ Doped Ca-α-SiAlON PhosphorPreparation and Photocatalysis of Sulfur-Doped Nano-TiO2/Ti FilmPhotocatalytic Activity of F-/ SiO2/TiO2 NanowiresStructural and Optical Properties of 6H-SiC Helium and Oxygen Implanted at 700 KInfluence of Background Material on 3 Veneered All-Ceramic Core MaterialsRelative Translucency Test of 3 All-Ceramics System Core MaterialTest of Relative Translucency for Three Veneered All-Ceramic Systems Core MaterialVibration and Temperature Measuring Experiments on Multilayer Piezoelectric ActuatorDensity of Li2TiO3 Solid Tritium Breeding Ceramic PebblesEvaluation of Glass Infiltration Speed within Dental CAD/CAM Alumina at Different TemperaturesRelative Solubility of MgO in MgO(7.8mol%)-ZrO2 Powders Prepared by CoprecipitationEffect of Heat Treatment Temperature on Properties of SiO2-ZrO2-Al2O3-Cr2O3 Coatings on Stainless Steel SubstrateBiocompatibility of HAP/Ti Gradient Coating by Microarc Oxidation and Biomimetic ProcessPhase Transformation of Al2O3-SiO2-ZrO2 Composite MembranesOxidation Properties of Nd-α-Sialon CeramicsOxidation-Resistance of (Ti,Al,Cr,Y)N Coatings Prepared by Arc Ion PlatingThe Exploring Research of the Determination Method of Magnesium Oxide HydrationDissolution of Fused Magnesia in Alkaline SolutionExperimental Analysis of Surface Defects Detection Method Based on Ultrasonic SignalApplication Progress and Vision of Biocereamics Utilized in Bone Tissue EngineeringMicrowave Hydrothermal Preparation of Uniform Nanocrystalline AnataseMeasurement and Distribution Pattern of Temperature Field within the Preform during CLVIMicrostructure and Properties of Al2O3-ZrO2(n) Composite Ceramics Prepared by Microwave SinteringProperties of Pressureless Sintered SiC-TiB2 CompositesPreparation and Properties of 3Y-TZP Ceramic ToolsEffect of Molybdenum on the Microstructure and Mechanical Properties of TiC/Ni Cermet Cladding LayersOptimization of Sintering Temperature and Doping Level of Cr2O3 in ZnO-Pr6O11-Based Varistor CeramicsTiB2-(Ti,W)C Eutectic Composite Ceramics Prepared by Combustion Synthesis under High GravityAl2O3-Reinforced Feldspar Ceramic Composite MaterialLarge-Bulk Solidified Al2O3-ZrO2(Y2O3) Prepared by Self-Pressure Assisting Combustion Synthesis under High GravityZinc Oxide Thin Films Grown by RF Magnetron Sputtering on Nanostructure Al Thin Layer/Glass and Glass SubstratesInfluences of Argon Atmosphere on Ceramic Coatings on Ti Alloy by Micro-Arc Oxidation in Na2SiO3 SolutionsFabrication and Characterization of Anode-Supported SDC Film Electrolyte and its Single CellFabrication and Microstructure of the Fe3Al/Al2O3 Composites by Pressureless SinteringPreparation and Characterization of Fe3O4@Au Nanoparticles Used as Precursor of FerrofluidsEffect of Sintering Systems and Colloidal Silica Sols on the Mechanical Properties of Oriented Silica-Based Ceramic Core MaterialsPyramid Shaped Pyrolysis Flame Catalyst Synthesis of Carbon NanotubesHow Can Ceramic Small-Medium Enterprises Access to Finance in China?XPS Studies on Light-Yellow Glass Prepared by Sol-Gel Dip-CoatingCharacterization of Ultrafine Glassy Powder for Al-Si-Ca-P-O-F Polynary System by Liquid PrecipitationMicrostructure and Crystallization of MAS Glass-Ceramics Containing Alkali OxidesEffect of Heat-Pressing on the Microstructure and Properties of a Novel Lithium Disilicate Glass-CeramicCrystal Phase Formation and Mechanical Properties of Lithium Disilicate Glass-Ceramics for Dental RestorationIndentation Fatigue and In Situ Inspection of Damage Evolution for GlassTesting and Evaluation of Infrared Radiation Property of Cordierite Based Glass-Ceramic MaterialsA New Type of Colored Alumina/Glass Composite Biological Safety Assessment – Cell Toxicity and Hemolysis TestsA New Type of Colored Alumina/Glass Composite Biological Safety Assessment - Oral Mucous Membrane Irritation and Skin Sensitivity TestsCorrosion Behaviors of Borosilicate Glasses in Various Leaching AgentsComparison of Leaching Characteristics of Lead in Waste CRTsDetermination of Silicon-Carbide Content in 95 Silicon-Carbide BrickDetermination of SiO2 Content in Boron-Containing Silica Refractories by Hydrofluoric Acid GravimetryExistence Forms of Magnesium Oxide in Steel Slag by Chemical Phase SeparationEffects of Carbonation on Steel Slag ProductsInfluence of the Slag Replacement Percentage on the Compressive Strength and Products of Slag Based GeopolymersA New Apparatus and Method for Thermal Expansion Determination of Large Refractory Samples at High TemperatureMineralogy and Physical and Chemical Characteristics of Coal Ash from Yang Zonghai Power PlantModification of CaO Refractory for Melting Titanium Alloys and its Hydration ResistanceAssessment of Anhydrous Ethanol Extraction to Determine the Ionic Concentration of Hardened Cement PastesUltrasonic Monitoring of Hydration Using Embedded Piezoelectric TransducersInfluence of Testing Methods on Setting Time of Foam ConcreteNuclear Magnetic Resonance Studies on Microstructure of Cement PastesNeedle-Penetration Method for Cement Paste AgglomerationInfluence of Cement Coarse Particle on the Self-Healing Ability of Concrete Based on Ultrasonic MethodPore Structure and Microstructure of Foam ConcreteDurability Assessment of Hot Dip Galvanized Reinforcement ConcreteNanoindentation Size Effects for Calcium Silicate HydrateTemperature Effect on Breakage Behavior of Cement Clinker by CompressionOn the Testing Strength Curve of Clay and Fly Ash Lightweight Aggregate Concrete by Rebound MethodInfluence of Protective Layer Thickness on the Mechanical Properties of Reinforced Concrete BeamOn the Experimental Methods for the Determination of Elastic Modulus and Hardness of Cement Particles by NanoindentationAbsorbing and Mechanical Properties of Cement-Based Composites with Nano-Titanic Oxide AbsorbentBond Behaviour of Concrete Block Including Steel Mesh of Various Rib Pattern and Bar SizeSeebeck Effect in Graphite-Carbon Fiber Cement Based CompositeElectromagnetic Shielding Effectiveness of Cement-Matrix Composite Containing Nickel FiberTesting Methods of Adiabatic Temperature Rise in ConcreteElectrochemical Charaterization of Steel Concrete under Multi-Factors InfluenceDetecting the Efficiency of Cathodic Protection in Reinforced Concrete by Use of Galvanostatic Pulse TechniqueTemperature Prediction in the System K2O-CaO-Al2O3-SiO2-P2O5A Method for the Determination of Ceramic Paste PlasticityImproved Settling Height Method for Characterizing the Stability of SuspensionInvestigation of Inorganic-Intercalated Vermiculite by X-Ray DiffractionPreparation and Structural Characterization of CMC/MMT NanocompositeIdentification of Natural Tourmaline and Similar Gems by Diffuse Reflection Fourier Transform Middle Infrared SpectrumNanoindentation Characterization of Calcium-Silicate-Hydrate with Different Curing ConditionsThermal Decomposition of DolomiteContribution of Green Jadeite-Jade’s Chroma Difference Based on CIE 1976 L*a*b* Uniform Color SpaceCr3+ Effect on the Correlation between Lightness Difference and Color Difference of Ruby RedMechanism of Polymerization Reaction during the Solidification of Meta-Kaolin Based Mineral PolymerIdentification of Rhinoceros Horn and its SubstitutesAnalysis of Pore Structure on Carbon Powder of Hemp StrawMicrostructure and Properties of Metal-Ceramic Composite Coating by Laser Surface Alloying on 9CrSi SteelEffect of Brazing Process on Alumina/Carbon Steel Interface Microstructure and Joining StrengthComputational Simulation of the Joint Shape after as-Reflowed SolderingHolding Strength of Bond to Diamond Grain within Vitrified AbrasivesEffect of how PDC Macro Interface Structure on the Performance of the Resistance to ImpactSemi-Quantitative Characterization of Residual Stresses of Polycrystalline Diamond CompactsPrestressed Ceramics Lateral Confined by Aluminum AlloyPreparation and Magnetic Properties of Carbon Encapsulated Fe-Cu Alloy NanoparticlesStructure and Properties of UV-Curable Waterborne Polyurethane/Acrylate Composite ResinRelationship between Backpressure and Light-Off Characteristic of the Three-Way CatalystAtomic Oxygen Effects of Polyimide/Silica Hybrid Films in Low Earth Orbit EnvironmentRepairing Technology of Aluminum Alloy with Compound Metallic-Membrane Plating