Special and High Performance Structural Materials
Heftet /
2016
/ Engelsk
Produktdetaljer
ISBN
9783038357612
Publisert
2016-04-20
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1460 gr
Høyde
240 mm
Bredde
170 mm
Dybde
45 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
896
This is the proceedings of the selected papers presented at Chinese Materials Congress 2015 (CMC2015) held in Guiyang, China, July 10-14, 2015.
This is the volume for Part 3 including 131 papers selected from 7 symposia of BB. Amorphous and high entropy alloys; DD. Magnesium Alloys; R. Advanced Metal Matrix Composites; S. High Temperature Structural Materials and Coating; T. High Performance Titanium Alloy; U. Powder Metallurgy; V. Pipeline and Pressure Vessel Materials
Les mer
Selected, peer reviewed papers from the Chinese Materials Conference 2015, July 10-14, 2015, Guiyang, China
- Preface
- Chapter 1: Amorphous and High Entropy Alloys
- Microstructure of Nb-Ta-V Based Hydrogen Permeation High Entropy Alloys
- Analysis of Shear Banding in Zr-Based Metallic Glass under Laser Shock Peening and Bending
- Fabrication and Characterization of Micro-Dent Produced by Laser Shock Peening on Zr-Based Bulk Metallic Glass
- Damage Characteristics of Zr-Based Metallic Glasses under Helium Ions Irradiation
- Effect of DC Pulse Patterns on Spark Plasma Sintering Process of [Fe0.8Co0.2B0.05Si0.2]96Nb4 Bulk Metallic Glass
- Effect of Ta Addition on Structural Evolution and Mechanical Properties of the CoFeNi2W0.5 High Entropy Alloy
- Microstructure Evolution and Hardness of AlCrFeNixMo0.2 High Entropy Alloy
- Investigation of Viscosity Measurements of Molten Fe-Si-B-Nb Alloys
- Effect of Annealing Treatment on the Microstructure and Magnetic Properties of FeSiBAlNi(C, Ce) High Entropy Alloys
- Glass Formation and Thermal Stability of Mechanically Alloyed Al75Ni10Ti10Zr5 Amorphous Composites with Graphene Addition
- Effect of Mn Contents on the Phase Transition of the High Entropy Alloy Prepared by Laser Cladding
- Influence of Annealing Treatment on Microstructure and Mechanical Properties of Fe-Cu-Si-Al Amorphous Composites
- Microstructure and Mechanical Properties of a New Refractory HfNbSi0.5TiVZr High Entropy Alloy
- Correlation between Electrical Resistivity and the Structural Evolution of Zr-Based Bulk Amorphous Alloys
- Core Losses Separation of Amorphous Alloy Core
- Research on Laser Brazing Applying Al-Based Amorphous Ribbon
- Liquid Phase Separation and Dual Glassy Structure Formation of Designed Zr-Ce-Co-Cu Alloys
- Chapter 2: Magnesium Alloys
- Tension-Compression Asymmetry in an Extruded Mg Alloy AZ31: Texture and Strain Rate Effects
- Effects of Microstructures on the Tensile Properties and Corrosion Resistance of High-Purity Magnesium
- Microstructure and Corrosion Behavior of Hot Compressed AZ31B Magnesium Alloy Joint
- Compressive Behavior at Ambient Temperature of ZK60-xDy Magnesium Alloys
- Effects of Filtration Purification and Solution Treatment on the Microstructure and Mechanical Property of AZ91D Alloy
- Evolution of Microstructure and Mechanical Properties of ZK80 Mg Alloy during Net-Shape Pressing of Extruded Perform
- Microstructures and Tensile Properties of Mg-6Gd-3Y-1.4Zn-0.4Zr Alloys
- Influence of a Trace Alloying of Ag on the Ageing Behavior and Mechanical Properties of AZ80M Magnesium Alloys
- Microstructural Evolution of a Fine-Grained Mg-Y-Nd Alloy during Superplastic Deformation
- Effects of Briquette Forming Condition on the Extraction of Magnesium from Calcined Magnesite via Vacuum Aluminothermic Reduction
- Effect of Heat Treatment on Microstructures and Properties of AZ40M Alloy
- Dynamic Recrystallization Behavior of Mg-Gd-Y-Zr Alloy during Hot Compression
- Mechanical Behavior and Microstructure Evolution of Mg-Gd-Y-Zn-Zr Alloy during Multipass Hot Compression Deformation
- Effect of Solution Treatment on Corrosion Resistance of the Biodegradable NZ20K Alloy
- Preparation and Characterization of As-Cast and As-Extruded Mg-1Mn-0.6Ce-3Y Alloy
- Low Temperature Co-Fired ZnNb2O6 Dielectric Ceramic Doped by B2O3
- Chapter 3: High Performance Titanium Alloys
- Stress Induced Martensitic Transformation in Ti-1023 Alloys
- Effect of β Annealing and near β Zone Hot Deformation on the Microstructure and Texture of TC18 Alloy
- Thermal Stability and Mechanical Properties of Ti-15-3 Titanium Alloy
- Microstructural Development around Crater in Commercial Pure Titanium
- Cellular Automata Simulation on Dynamic Recrystallization of TA16 Alloy during Hot Deformation
- Microstructural Evolution during Forging of Ti-6Al-4V Alloy
- Effect of Alpha Phase Characteristics on the High Cycle Fatigue Properties of Ti-6Al-4V Alloy
- Deformation Behavior of Ti-6Al-4V-0.1B Alloy Loaded under High Strain Rates
- Effect of Hot Forging Strain Rate on the Microstructure and Mechanical Properties of TC4-DT Titanium Alloy
- Dynamic Compression Properties of Low-Cost Ti-6Al-4V Plates
- Effects of Stress-Relief Annealing on the Residual Stress and the Microstructure of TA15 Welded Joint
- Microstructure and Tensile Properties of Boron-Doped Beta Titanium Alloy
- Microstructure and Mechanical Properties of TiNiFe Shape Memory Alloys with Different Compositions
- Influence of Shot Peening on the Surface Hardness of TC11 Titanium Alloy after High Cycle Fatigue Test
- Characterization of Hot Deformation Behavior of Ti-4.5Al-3V-2Mo-2Fe Titanium Alloy
- Influence of Upsetting and Drawing Times on the Microstructure and Microtexture of TC4 Titanium Alloy
- Microstructure and Mechanical Properties of Powder Metallurgy Ti-22Al-24Nb-0.5Mo Alloys Joints with Electron Beam Welding
- Influence of Cooling Rate on Phase Transformation of a α+β Titanium Alloy
- Hot Compressive Deformation Behavior of TC4-DT Titanium Alloy
- Influence of Electric Pulse Heat Treatment on the Dynamic Mechanical Behavior of TC6 Titanium Alloy
- Study on Rotating Bending Fatigue Property of Ti65 Titanium Alloy
- Low Cycle Fatigue Behavior of TA29 Titanium Alloy at Different Temperatures
- Prediction of High Cycle Fatigue Property of Ti-6Al-4V Alloy Using Artificial Neural Network
- Effects of Aging Temperature on the Microstructure and Mechanical Properties of a Ti2AlNb Based Alloy
- Effects of Cold-Rolling Reduction on Microstructure and Mechanical Properties of Ti50Zr30Nb10Ta10 Alloy
- Chapter 4: Advanced Metal Matrix Composites
- Wetting Behavior and Interface Characteristic of Ti32.8Zr30.2Ni5.3Cu9Be22.7/Ti6Al4V
- Investigation of Interface in SiC Fiber Reinforced TC17 Titanium Alloy Matrix Composites
- Fabrication and Strengthening Mechanisms of Al/WC Particles Composite Prepared by Accumulative Roll Bonding
- Microstructural Difference between Unreinforced Canning of TC17 Alloy and the Matrix in SiCf/TC17 Composite Fabricated by HIP Process
- Hot Deformation Behavior and Processing Map of 25%SiCp/2009A1 Composite
- Influence of HA and Environmental Factors to the Damping Performance of HA/Mg-3Zn-0.5Zr Composites
- Enhanced Tensile Properties of Graphene-Al5083 Composite Prepared by Hot Pressing and Hot Extrusion
- Hot Deformation Behaviors and Microstructure Evolution of SiCp/Al Composites
- Investigation of the Effect of Argon Arc Welding Parameters on Properties of Thin Plate of In Situ Titanium Matrix Composites
- Ambient-Temperature and High-Temperature Tensile Properties of Investment Casted Titanium Matrix Composites with B4C Additions
- Chapter 5: High Temperature Structural Materials
- Structures and Properties of Welding Seams in Nickel-Base Superalloys
- Hot-Gas Corrosion Resistance of DD9 Single Crystal Superalloy
- Stress Rupture Properties and Fracture Behavior of DD6 Single Crystal Superalloy
- Effect of Degree of Order on Hydrogen Diffusion in (Fe,Ni)3V Alloys
- Effect of Long-Term Aging on the Evolution of γ' and TCP Phases of a Ni3Al Based Single Crystal Superalloy
- Partition Behavior of Ni between γ and γ' Phases in the New Type Co-Based Superalloys
- The Effect of Remelting on the Microstructure and Mechanical Properties of a Nickel Superalloy
- Effect of Carbon on the Microstructural Evolution and Thermal Fatigue Behavior of a Ni-Base Superalloy
- Effects of Alloying Elements on the Properties of Ni-Mo-Cr Superalloys with Low Thermal Expansion
- Studies on Microstructure and Properties by Mass Smelting for Directionally Solidified Superalloy
- Research on Effect of Alloy Elements on Equilibrium and Properties of Ni-Cr-Co Type Nickel-Based Superalloy
- Influence of Carbides on Stress Rupture Property of a Ni-Base Superalloy
- Decreasing Defects of Center Porosity and Improving Secondary Pipe Castings for Superalloy Ingots by Dynamics Methods
- The Microstructure and Mechanical Properties of Heat Treated NiCr20TiAl Superalloy
- Effect of Sulfur on the Hot Plasticity of GH625 Superalloy
- Effect of Al on the Microstructure and Mechanical Properties of HK40 Heat-Resistant Steel at High Temperature
- Effect of Microcast-X Fine Grain Casting on the Microstructure and Mechanical Properties of K492M Alloy at 760°C
- Role of Cobalt in the Microstructural Stability of Single Crystal Superalloys
- Influence of Metallographic Etchant on γ’ Precipitates Characterization in a Single Crystal Nickel-Base Superalloy
- Influence of Heat Treatment on the Microstructures and Mechanical Properties of K465 Superalloy
- Microstructure and Properties of W-Cu Composites Fabricated by Laser Cladding Forming
- Microstructure, Mechanical and Tribological Properties of the Rapidly Solidified NiAl/Cr(Mo,Dy) Hypoeutectic Alloy
- Microstructure of Chemical Vapor Transport Deposition Single Crystal Tungsten Coating Working at 1600°C
- Effect of Trace Strontium Addition on Microstructure and Room Temperature Fracture Toughness of Nb-12Si-22Ti Alloys
- Microstructure and Room Temperature Mechanical Properties of a New Corrosion-Resistant Alloy GH945 for Oil and Gas Applications
- Phase Diagram and Phase Equilibrium Studies on Ultra High Temperature Alloys of Nb-Si-Ti
- Chapter 6: Special Coatings
- Laser Brazing Research on Carbon Steel and Stainless Steel Applying Fe-Based Amorphous Coating
- Effect of Mo Content on the Corrosion Resistance of Fe-Based Amorphous Composite Coating
- Microstructure and Properties of Fe-Based Amorphous Composite Coating Prepared by Pulse Laser
- Study on the Corrosion Behavior In Vitro and Mechanical Properties of the FHA Coated Mg-Zn-Zr Alloy
- Structure and Properties of W-Ti Thin Films Deposited by Magnetron Sputtering
- Preparation and Properties of HfO2-Y2O3 Composite Coating on the Surface of Iridium Coating
- Microstructure on Laser In Situ Deposit of TiBx/TiC ReinforcedComposite Coatings
- Wear and Corrosion Properties of Crystalline Ni-W Alloy Coatings Prepared by Electrodeposition
- Microstructure and Properties of Fe Base Coatings Reinforced by In Situ TiC Particles Using Plasma Jet Surface Metallurgy
- Influence of Impact Damage on the Thermal Stress Distribution within the EB-PVD Thermal Barrier Coatings
- Effect of the Porosity on Thermal Stress within TBCs Using Finite Element Method
- WC Particles Reinforced Co-Based Alloy Coatings Produced by Laser Cladding
- In Situ Synthesis and Oxidation Behavior of Ti-Al-Ag Ternary Coatings
- Influence of Ti on the Microstructure and Performance of Fe-Cr Alloy Cladding Layer
- Modulation of Tribological Performance of Copper by Chemical Modification with H2O2/HCl Mixture
- Solar Reflection Characteristics of Phthalocyanine Green/TiO2 Composite Green Pigments Prepared via Different Approaches
- SiO2 Cryogel Dispersion in Organic Solvent for the Application as Transparent Heat Insulation Coating on PET
- Top-Down Fabrication of Superhydrophilic Graphene Oxide Nanosheets
- Chapter 7: Methods of Powder Metallurgy in Creation of High Performance Structural Materials
- Fine-Grained W-Ni-Fe Heavy Alloys Prepared by Spark Plasma Sintering
- Prediction of Ring Rolling Process of PM Ti2AlNb Alloy by Hot Isostatic Pressing Based on Gleeble-3800 and FE Simulation
- Preparation and Welding Performance of Ti–6Al–4V Powder Compact Fabricated by Hot Isostatic Pressing
- Isothermal α Precipitation and Evolution in a Hot-Rolled near β Titanium Alloy
- Preparation and Properties of Aluminum Boron Composite
- The Influence of Cylindrical Grinding Medium on Particle Size and Mechanical Properties of TiC Steel Bonded Carbide
- Solidification Characterization of K418 Alloy Powders Fabricated by Argon Gas Atomization
- Effects of Combined Addition of Cr3C2 and NbC on Microstructure and Properties of Cemented Carbides Prepared by WС-Co Composite Powder
- Meso-Structure Design of B4C-Al/Al Composites by Hot Pressing
- Preparation and Magnetic Properties of Nanocrystalline FeSiAl Powder Produced with Strip Cast Ingot Process
- Flow and Densification Behaviors of Sintered P/F-10C50 Steel under Hot Compression
- Fabrication of Zn Alloy Foam via Powder Metallurgical Approach
- Fabrication of W-Cu/Lu2O3 Composites with High Strength and Electrical Conductivity Prepared by Electroless Plating and Powder Metallurgy
- The Microstructures and Properties of Carbon and Graphite Materials Prepared from Mesocarbon Microbeads by Different Molding Methods
- Interface and Damping Capacity of Mg/Al Multilayered Composite Produced by Accumulative Roll Bonding
- Effect of High Energy Ball Milling on Structures and Properties of Atomization Fe-Based Nanocrystalline Soft Magnetic Powders
- Effects of Paste Composition and Sintering Process on Performance of Silver Paste for Silicon Solar Cells
- Structure and Inverse Magnetocaloric Effect of Mn1.2Co0.8Si0.2P0.8 Compound Prepared by SPS
- Effect of Ti Element on the Mechanical Properties of Cu-Matrix Bonding Diamond Tool Bits
Les mer
Produktdetaljer
ISBN
9783038357612
Publisert
2016-04-20
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1460 gr
Høyde
240 mm
Bredde
170 mm
Dybde
45 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
896