Recent Trends in Materials and Mechanical Engineering Materials, Mechatronics and Automation
Heftet /
2011
/ Engelsk
Produktdetaljer
ISBN
9783037850992
Publisert
2011-06-08
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
4500 gr
Høyde
240 mm
Bredde
170 mm
Dybde
120 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
2400
Redaktør
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This collection of over 429 peer-reviewed papers on Materials and Mechanical Engineering is divided into the chapters: 1: Materials Engineering and Mechanical Engineering - 2: Manufacturing and Production Processes - 3: Automotive Engineering and Industry Application. It provides an authoritative overview of the subject.
Les mer
<p>Selected, peer reviewed paper from 2011 International Conference on Recent Trends in Materials and Mechanical Engineering (ICRTMME 2011), 27-28 January, 2011, China, Shenzhen</p>
- Preface, Organizing and Committees
- Chapter 1: Material Engineering and Mechanical Engineering
- Study on the Swelling and Deswelling of the PH / Thermosensitive Hydrogel
- The Corrosion Performance of a Binary Cu-Ni Alloy Used as an Anode for Aluminum Electrolysis
- Techno-Economic Analysis of Magnetic Treatment of Cobalt Concentrate
- Analysis of Basic Oxygen Furnace’s Temperature by the Flame’s Emission Spectrum
- Plasticity Model of Extruded Peanuts under Mechanical Pressing
- Development of Web-Based Partner Alliance Management Platform
- A New Reduced-Reference Image Quality Assessment Method Based on SSIM
- Total Object Unified Model Driven Architecture Method for Manufacturing Information Management
- Numerical Simulation of Welding Residual Stress and its Creep Strain for Cr5Mo Steel Welded Joint
- Engineering Graphic Transition in Third-Angle and First-Angle Projection
- Development and Application of Tandem LC-MS Method for the Determination of Paralytic Shellfish Poisoning Toxins for Pollution Monitoring
- Additives on Hydrogen Donor Catalytic Upgrading for Viscosity Reduction of Heavy Oil under the Conditions of Steam Injection
- Design of Digital Display Control Devise System for Concrete Mixer Truck
- Design for Digital Display Device and the Function of Control of Concrete Truck-Mixer Drum
- Fuzzy Controller in the Application for Anti-Surge of the Axial-Flow Compressor
- Face Image Segmentation Using Color Information and Saliency Map
- Fabrication and Oxidation Resistance Property of SiC Coatings on Surface of Graphite by Chemical Liquid Deposition
- A New Architecture for Large Data Warehouse
- Compressed Iterative Particle Filter for Target Tracking
- An Implementation and Improvement of Fast Two-Dimensional Median Filtering
- Extension of Von Neumann Model of National Economic System
- Testing Methods for Rock-Embedded Foundation Pile in Karst Area
- Study on Effect of Vibration Parameters in Filling Process of the Dynamic Injection Molding
- Remote Sensing Image Segmentation Based on Human Visual System Region-Split and Graph Cut
- Application Research of Mobile Agent Technology Based on Windows Platform
- Discrete Element Simulation of Composite Geomaterial Talus Deposit Based on Digital Image Technology
- A New and High-Accuracy People Counting Algorithm
- Research on Preparation of High Purity (C2F5COO)3Nd(phen) and the Fluorescence Properties of its Solution in DMSO-d6
- Study on Bonding Capacity of Modified Glued Structural Lumber for Bridge Deck Based on China Southern Plantation
- Analysis on Health Risk of Volatiles of Pinus massoniana Biomass by TD-GC-MS
- Study on Heat Release Behavior of Pinus Biomass by TD-GC-MS
- Analysis on Function Components and Biohealth Function of Pinus massoniana Lamb Biomass
- Study on Biomedical Prospects of Extractives of Pinus massoniana Lamb
- Assessment on Environmental Friendly Characteristics of Pinus Biomass for Building Materials
- Analysis on Biohealth Function of Dried Pinus Biomass by TD-GC-MS
- Approximation Theory on the Electromagnetic Fields in Metal Cavity
- A Computer Simulation on Human Injury during the Aircrew/Seat Through-the-Canopy-Ejection
- Tensile Behavior and Fractography of Ti-TiAl Multi-Layered Foil Prepared by Electron Beam Physical Vapor Deposition Technology
- The Electrostatic Tangential Resistance of the MEMS Moving Plate Considering the Edge Effects
- Numerical Simulation and Experimental Study of Static Driven Short Piles in the Dualistic Structure Stratum
- BP Neural Network Fitting for Spectra of Blast Furnace Raceway
- Finite-Time Chaos Control of the Chaotic Financial System Based on Control Lyapunov Function
- Application of Nonparametric Kernel Density Estimation in Hongkong Stock Market
- Numerical Investigation on Thermal Environment inside the Passenger Compartment of a Highway Sleeper Coach
- Effects of Exterior Window on Temperature Distribution and Thermal Comfort of Commercial Buildings with Radiant Floor Heating System
- Transient Responses of Second-Order System
- Determination and Distribution of Heavy Metals in the Municipal Waste Incinerator Slags from Guangdong Province
- ARM7-Based File System Design
- The Distinguishing Method of Internal and External Defects Based on Double Liftoff MFL Signals of Oil Well Pipes
- Spectra Modeling of Blast Furnace Raceway by Neural Network
- A Study on Tensile Deformation Features of Ni-Based Super-Alloy Prepared by EB-PVD
- Tensile Creep Damage and Rupture of Al2O3-SiO2(sf)/AZ91 Composite
- Integrating RE/RP for Rapid Product Development Based on Haptic Modeling
- Effects of Global Climate Change on Water Resources in Rwanda: Lake Kivu Case Study
- Complex Angle Measuring Method of Passive-Radar-Seeker
- A Measurement of Vehicle Attitude Using Single Tri-Axial Acceleration Transducer Based on ANN
- The Variation Coefficient Method for Reliability Sensitivity Analysis of Cylindrical Helical Spring
- Use of Municipal Sludge with Soil on Marigold Flower Growth in Pot Experiments: Case Study of Vientiane City, Lao P.D.R
- Heterogeneity of Suppliers and Knowledge Transfer in the Supply Chain
- The Effect of Interphase Modulus and Thickness on Stress Transfer of Short-Fiber-Reinforced Composites
- Removal of Cu2+ in Aqueous Solutions Using Sludge Incineration Slag as an Adsorbent
- The Synthesis of High Yield Diglycerin Borate
- Research on the Creation of the Platform Environments for Network Analog Based on FHMIPv6 of NS2
- Precision Analysis and Discussion on Marker Identification Method
- Study on the Cutting Force in Ultrasonic Elliptical Vibration Cutting of Hardened Stainless Steel
- Aircraft Cable Fault Location Based on Detection Model
- A Methodology of Data Translation for Collaborative Design
- Effect of Blade Numbers on Pressure Drop of Axial Cyclone Separators by CFD
- Effect of Pressure on Microstructure and Properties of High Silicon Electrical Steel by EB-PVD
- Phase Composition and Magnetic Structure of High Silicon Electrical Steel by EB-PVD
- Assignment Problem Based on Improved Ant Colony Algorithm
- Research on Materialized View Selection in the Data Warehouse
- Blind Source Separation of Convolutive Mixtures by Using Time-Delayed Statistics and Exact Diagonalization
- The Dependence of Corrosion Resistance of Ni-Cr-Mo-Cu Alloy to NaOH Solution on 4Cr/ (2Mo+Cu)
- Researched on the Corrosion Resistance of Ni-Cr-Mo-Cu Alloy to Aqueous Change with the APF in Regular Way: an Approach of Quantum Electrochemistry
- Design of a Dc Motor Soft Start Based on AVR Microcontroller
- Study on the Modified Effect of Wood Fiber by Silane Coupling Agent
- Study on Properties of Recycled Fiber from Waste Newspaper / PLA Composites
- Loads Transfer in the Adhesively Bonded Patch
- Development of Visual Attention Measurement System of Simulated Traffic Environment
- End Effect Processing for Empirical Mode Decomposition Using Fuzzy Inductive Reasoning
- The Preparation of CaMgSi2O6: Eu3+,Li+ Red Phosphor
- Research on the Analysis Method of Magnetic Field in the Axial Magnetic Drive Mechanism
- Analysis of Urban Environment: Case Study of the Spatial Integration of Rwandan Cities
- Dielectric Tunability in Ferromagnetic-Ferroelectric Composite System
- Modeling Wood Density of Larch by Near-Infrared Spectrometry and Support Vector Machine
- Design of a New Vacuum Cleaner
- Mechanical Properties of UP Resin from Soybean Oil
- Preparing of SMC Artificial Marble and its Mechanical Properties
- Quality Inspection and Analysis of Workpiece Surface in A3 Steel Machining
- Preparation and Structure of Chitosan Swellable in Alkali Solution by Ultrasonic Treatment
- Residual Stress Modeling and Simulating for the Panel with Interference-Fit Riveting
- Edge Detection of Inner Crack Defects Based on Improved Sobel Operator and Clustering Algorithm
- DFT-Based on Mahalanobis Distance Discriminant Analysis Method Channel Estimation Algorithm for OFDM Systems
- Texture Baking Techniques on Construction of Virtual Reality Interactive Scenes
- Explore on the Feasibility of RFID Technology in Library
- Research on Dynamic Wear of Revolution Joint with Clearance for Mechanical System
- Manufacture of Micro Gear Shaft Based on Micro Hobbing Technology
- Topology Optimization Design of Implantable Energy Harvesting Device
- Privacy Protection in Cloud Storage
- Investigation of Shear and Thermal Characteristics of Polishing Interface in Soft Pad Polishing Process
- Research of a Novel Bi-Directional Flexible Load for Electric Vehicle Test Bench
- Research of a Full-State Fuel Cell Power Electronic Simulator
- Obstacle Avoidance System Based on Single Rotary Ultrasonic Sensor
- Displacement Back Analysis Based on Differential Evolution Algorithm in Metro Station Engineering
- An Electronical Cereals Weight Measure System Using Vibrating Wire Pressure Sensors
- An Road Obstacle Detection Method Based on Monocular Measurement
- Vibration of Diatomic System in One-Dimensional Nanomaterials
- A Study of Three Dimensional Modeling Technology on Food Twin-Screw Extruder
- On the Topology Design of Integrated Wireless Networks
- Healthcare Information System and Data Mining
- Study on Pine Wilt Disease and its Control Situation
- The Analysis and Comparison of the Technology Performance about Rapid Layered Switching Mobile IPv6 Protocol
- The Improvement Method Design for β-SiC Recrystallization
- Examine Applicability of the RANS and LES Method on Numerical Simulation of Centrifugal Pump
- System Modeling and Analysis for Injection Molding Machine Take-Out Manipulator
- A Kind of Load Balance Multicast Routing Algorithm Based on Distributed Computation and Centralized Control
- Fault Diagnosis Research of TWERD Frequency Converter Based on Wavelet Transform
- Research on Policy-Based Service-Oriented Computing Security
- Research on the Business Model and Protocol of Offline Digital Coupon Based on RSA Digital Signature
- Network Communication System Based on AT91SAM92 Hardware Design
- A Preliminary Research on Operation Mode of Condensing Heat Recovery Hot Water Supply System for Water-Cooled Chillers
- ComplexModifier on Microstructure in Mg2Si/Al-Si Composite
- Optimization Design of Electromagnetic Conductance Sensor for the Water Content of Crude Oil inside Pipeline
- Study on Dynamic Balance in Main Driving Mechanism of Cold Rolling Mill Based on the Particle Swarm Optimization Algorithm
- Uncertain Newsboy Model
- Research on Automobile Suppliers Evaluation Based on Statistical Analysis
- Netted Radar System Design with Spread Spectrum Technology
- Design of Robot Master-Slave Control System Based on LabVIEW
- Defects Inspection of Steel Ball Based on Optical Fiber Sensing Technique
- Finite Element Analysis of Drum on the New Type Self-Driven Towing Machine for Cable
- Modeling Methodology Based on Stacked Neural Networks for Inferential Prediction of Polypropylene Melt Index
- Simulation of Temperature Induced Colorimetric Shift of YAG:Ce0.06,GDx Phosphor
- Special Scattering Characteristics of Materials Oriented Method of Polarization Analysis
- A Landing Gear Drop Dynamic Simulation Based on the LMS. Virtual. Lab
- Meshed Chaos Mapping-Based Newton Iteration Method of Mechanism Synthesis
- CFD Simulation for Displacement Deep-Vee Vessels on Resistance Influence Factor
- A Method to Determine Unstable Point and its Impact Estimation in Debris-Blocking Dam Monitoringsurvey Network
- The Research on Model Updating Technology of Complex Multibody System Virtual Prototyping
- Research on Relationship between Industrial Structure and Economic Growth: Evidence from Henan Province in China
- Chapter 2: Manufacturing and Production Processes
- Analysis on Technology Input Structure Based on Grey Theory: Evidence from China
- Design of Fiber-Optic MEMS Acoustic Sensor System for Gunship Acoustic Detecting
- Object Petri Nets Based Monitoring for the Aircraft Assembly System in MES
- Product Life Cycle Energy Consumption Analysis Method Considering Remanufacturing
- Research on Public Hospital Reform and Medical Staff Incentive Mechanism in China
- Joint Network Traffic Forecast with ARIMA Models and Chaotic Models Based on Wavelet Analysis
- Motor Bearing Fault Diagnosis Based on MSICA-LSSVM
- Synthesis and Characterization of Methyl-Orange/Layered Double Hydroxide (LDH) Nanocomposite
- Flaw Sizing Detection by Pulse-Echo Ultrasonic Technique
- Using Artificial Neural Network to Filter Spam for Chinese Mail
- An Analysis of Verb Phase Based on Concept Model for Nature Language Understanding
- Evaluation of Physical Property of Plasma-Sprayed Coating Based on Ultrasonic Testing
- The Research of Steer by Wire System Based on Fuzzy Logic Control
- Discussion and Suggestion for the Design of Slope Anchor Bolt
- Research on Nitrogen Removal Performance of Leachate Treatment of WSIP Reactor
- Model and Control of Nitrogen Releasing of Lakes’ Sediment
- The Application Research of Amplitude Spectrum in the Coating Layer Thickness Detection
- Modeling the Loading-Rate Dependency of the Hysteretic Dynamics of Magnetorheological Dampers
- A Control System Based on the Fuzzy Self-Tuning PID Controller for Three-Phase Rectifier
- Influence of Ball Milling Parameters on Preparation of Ti50Cu23Ni20Sn7 Amorphous Alloys Powder
- Kinematic Analysis of Power Drive Transmission System of High-Performance Four-Wheel Off-Road Vehicles
- Effects of Al-5Ti-B-2RE on the Microstructures and Mechanical Properties of Al-10Mg Alloy
- Effect of Dressing Load and Speed on Removal Rate in the Chemical Mechanical Polishing Process
- Measure Method on Reaction Time of Visual Attention Using a New-Style Mechatronic Measurement System
- Web Service Composition Algorithm
- Copula-Based Security Assessment of Power Insulators Influenced by the Storm
- The Optimization Design Study of Selective Laser Sintering Process Parameters on the Pro-Coated Sand Mold
- Research on Improved Genetic Algorithm for Heterogeneous Open Vehicle Routing Problem
- An Improved Fast Algorithm for Solving Toeplitz Systems in Mechanical Control
- Modeling and Analysis of a Humanoid Robot Active Stereo Vision Platform
- Research on Comprehensive Control of Vibration Isolation System with Flexible Foundation
- Motion Control System Design of a Humanoid Robot Based on Stereo Vision
- Development of Ceramic Moulds with Zirconia Primary Coat for Investment Casting of Gamma Titanium Aluminide Based Alloys
- Microstructure and Characteristics of Ti-Nb-Sn-HA Composite Powder Fabricated by Mechanical Alloying
- Numerical Study for Centrifugal Fan Based on Parametric Method
- Modeling and Simulation of Enterprise Alliance Running Status Based on System Dynamics
- Reform and Innovation of Practice Teaching during Water Pollution Control Engineering Course
- Probabilistic Analysis of One-Dimensional Consolidation with Monte Carlo Simulations
- Quasicrystal Al63Cu25Fe12 Melting Nearby Resistivity and Viscosity Properties Research
- Thermal and Structural Analysis of Asphaltine in Heavy Oil before and after the Hydrogen Donor Catalytic Reaction of Upgrading and Viscosity Reduction under the Effect of Auxiliary Agents
- Tolerance Sensitivity Robust Design and Evaluation Method
- Key Technologies and Development of Micro-Nano Positioning Platform with Large Travel
- Stability of the Jeffcott Rotor with Local Rubbing
- Research about Implementation Strategies in JMI System of Third-Party Logistics Enterprise
- Vibration Transient Response Using Statistical Energy Analysis
- The Improved PSO Arithmetic for Identifying Ground Stress Based on Rock Core Discing Observation
- Covalent Bond Cluster Effects and Phase Transitions in Superconductor Mg1-xAlxB2 Compounds
- Relational Similarity Measure: An Approach Combining Wikipedia and WordNet
- Process Optimization for the Side-Plate of the Core Part in Parallel Flow Evaporator
- Operating Parameters’ Influence on the Specific Volume of Extrusion Puffed Food
- A Method of Audio Digital Watermark Based on Discrete Wavelet Transform and Quantization Index Modulation
- Screening on Three High Efficient Antagonistic Fungi of Colletotrichum gloeosporioides
- Model of DOS near the Top of Valence Band in Strained Si1-xGex/(001)Si
- Adiabatic Shear Localization in High Speed Cutting of Hardened Steel
- Appliance on Evaluation of Type Selection for Agricultural Machinery Based on Grey Relational Analysis Method
- Simplified Output Feedback Stabilization for Interconnected Systems Based on Dynamic Surface Control
- Vibration Characteristics Simulation and Experimental Study of Super-Heavy Vibrating Shaker
- Web Data Extraction with Hierarchical Clustering and Rich Features
- Planar Four-Linkage Guide Mechanism Synthesis Based on Mechanical Chaos System Methods
- Chaos Nested Intervals Method to Solve Nonlinear Equations and Planar Crank-Slide Mechanism Synthesis
- A CRF Based Model for Learning High Level Behaviors of the Elders in Household Environment
- Microstructure and Mechanical Properties of Al-7%Si Matrix Composites Reinforced by Al63Cu25Fe12 Icosahedral Quasicrystal Particles
- Extraction Feature of Motor Unbalance and Interference of Alternating Current Based on the Wavelet Transform
- The Application of Grillage Method in Analyzing Box Girder Structure
- Aeroelasticity Simulation of the Large-Span Basket Handle Tied-Arch Bridge
- Kinematics and Dynamics Analysis of an Innervation Seat Based on ADAMS
- Probabilistic State Estimation Based Scheduling Approach for Cloud Computing
- Application of Cluster Algorithm in Clothes Shape Classifying
- Effect of Hydrogen in rf Plasma Nitriding on Al-6wt%Cu Alloy
- Research on Construction Method and Measure for Informatization Surveying and Mapping Service System
- A Pattern Making System Based on Clothes Databases
- A Novel Modeling Method Based on Telmat Laser Scanning System
- Automated Trust Negotiation for Web Services
- The Garment Fashionable Shape Prognosticating Based on Manufacture Database
- The Integrated Safety Management of the Multi-Exits of the Campus Network
- Finite Element Analysis for the Chassis of Dynamic Compaction Machine
- Dynamic Response of Out-Plane Line Loads by a Shallow-Embedded Circular Lining Structure
- Analysis on the Application of GPS in Hull Installment and Marine Monitoring
- A Study of Metameric Blacks for the Representation of Spectral Images
- Research of Electric Wheelchair Control System Based on DSP
- Design and Realization of Wireless Sensor Network Gateway Based on ARM
- Investigation on the Co-Combustion Characteristics of Pulverized Coal and Paper Mill Sludge
- Effect of Combined Shot Peening on Fatigue Limit of TC4 which Have Different Microstructure
- Study on Surface Heat Transfer Coefficient of Mixture of Nitrogen-Spray Water Eject Quenching under Normal Pressure and High Velocity
- Flashover Pattern Recognition by HMM Based on Fractal Characteristics of Leakage Current on HV Insulators
- Thermal Conductivity of Silicon Thin Films Predicted by Molecular Dynamics Simulations and Theoretical Calculation
- Chaos Control of Vehicle Nonlinear Suspension System with Multi-Frequency Excitations by Nonlinear Feedback
- Effect of La2O3 and CeO2 on Morphology of Graphite in Cast Iron
- Model Optimization and Stability of Hemoglobin Analysis in Human Soluble Blood Samples by FTIR/ATR Spectroscopy
- Study of the Bit Key Technology in the Airborne Measurement and Control System
- Research on the Multi-Disciplinary Optimization Design Technology for the ETO Product
- Research on the Cooperative CAPP Modularity Technique Supporting the ETO Product
- The Auto-Adaptive Digital Watermark Algorithm Based on Wavelet Transformation and FCM Algorithm
- Adaptive Tracking Control of Wheeled Mobile Robots
- Application of Fiber Point Diffraction in Measurement of Optical Surface
- Nondestructive Testing of Blockboard Using Combination of Wavelet Transform and Gray-Scale Mathematical Morphology
- Edge Detection of Color Image Using Unit-Linking PCNN
- Elevator Group Control System Based on Fuzzy Single-Chip Computer
- FEM Simulation Analysis of a New-Style Slick Pole Self-Lock Up-Down Setting
- Matching of Bag’s Images Based on Straight Line Feature Control
- Effect of Fly Ash on Mechanical Properties and Structure of CaO-Al2O3-P2O5-SiO2 System
- Network Community Detection Based on Co-Neighbor Modularity Matrix with Spectral Clustering
- Improving Anti-Distortion Performance of Joint Transform Correlator
- Comparative Study on Bearing Performance between Y-Section Pile and Conventional Pile
- Charging-Discharging Control with MPPT for Photovoltaic System
- Supply Chain of Concrete Producing Enterprise Based on Soft-Man Technology
- Feature Model Design Using Dynamic Feature Semantic Network
- ANN-Based Feature Recognition to Integrate CAD and CAM
- Fundamental Experimental Study on Numerical-Control Electrochemical Finish Machining for Integral Impeller Blade
- Compression Behavior of a Self-Healing Fibre Reinforced Epoxy Composite
- The Research of Engine Modeling Based on the Petri Model of Behavior Flow
- A Study of Real Time Security Monitoring of Commercial Vehicles Using a Microscopic Traffic Simulation Model
- Experimental Investigation into the Static Cushioning Properties of Rhombic Honeycomb Paperboard
- Study of Complex Network Optimization in Wireless Sensor Networks
- Research on Rotating Machinery Fault Diagnosis System
- Accident Reconstruction of Lifting Crane Based on FEA
- Research on Optimization Algorithm for MFJSSP
- The Application of the Improved Verhulst Model in Mid-Long Term Load Forecasting
- Chaotic Dynamics of Fractional-Order Liu System
- Polypyrrole Nanofilm with Improved Conductivity
- Etching Effect of SF6 Plasma on Cotton Fiber
- The Existence of Fixed Point for a Generalized 3x+1 Function
- Research on Improving LFMCW Radar Level Measurement Accuracy
- Research on Design Method of Electromechanical Product Form Based on MA-GA
- Application Prospect and Advantages of Power Supply System Based on 20kV Power Distribution Network and Microgrid in China
- Multilevel Inverter Based DSTATCOM with Energy Storage Device
- STATCOM Based on Cascade Multilevel Inverter
- A Software Evolution Process Model under the Circumstances of Cloud Computing
- The Performance Analysis on a Software Evolution Process Model under the Circumstances of Cloud Computing
- Monte Carlo Simulation of Flexible Multibody System with Uncertainties
- Evaluation Method of Manufacturing Resources in Complex Product Development Process
- The Prediction of SO2 Pollutant Concentration Using a RBF Neural Network
- The Effect of the Friction Heat on the Brake Performance of Automobile
- Study on Shock-Absorbing Capacity of Roadside Safety Devices Made by Porous Ultra-High Molecular Weight Polyethylene
- Determination of Rheological Parameters for Several Lubricants Applied in the High-Speed and High-Pressure Bearings
- Development of Heating Device for Diesel Fuel Filter and Analysis of Test
- Clustering Chinese Web Search Results Based on Association Calculation
- Research on Knowledge-Based Intelligent Tutoring System
- A Design and Realization on Quantitative Measurement and Evaluation System for Teaching Effectiveness in Middle and Primary School
- The Influence of Argon Pressure on the Structural and Physical Properties of LaB6 Films
- Chapter 3: Automotive Engineering and Industry Application
- Free-Form Surface Five-Axis Machining G-Code Automatic Generation System Based on Path Messages for the Different CNC System
- Application of Solar Technology in Design of Public Buildings of Cold Regions
- Adaptive PID Temperature Controller Based on Fuzzy Logic
- The Application of MATLAB Software on the College Network Teaching Platform of the Mathematics Experiment
- Preparation and Antibacterial Activity of Al2O3-ZrO2 Carrying Ag+
- Analysis of Interface Stress of Sn3.5Ag0.75Cu Solder under Temperature Cycle QFP Device
- Based on Edge Node Network Service Recognition Research
- Extension Model of Influence Diagrams
- Research on the Maintenance Technology of Network Production Equipments and its Application
- The Fuzzy Comprehensive Assessment of Brand Competitiveness of Property Insurance Companies
- Study on Similar Case Determination of Personalized Recommendation System
- WSN Location Signal Strength Matches Based on Sugeno Model
- Fuzzy-Robust Design Optimization of Dimension Tolerance Using the Improved Genetic Algorithm
- Characterization of Y/TiO2 Nanoparticles and their Reactivity for CO2 Photoreduction
- Numerical Simulation Research of Micro-Injection Molding Simulation
- Hydrogen Storage in A-Type Zeolite by Grand Canonical Monte Carlo Simulation
- Research of Features Extraction for Printed Numerals Based on Geometric Properties
- Study on Method to Extract Feature Parameter of Wear Particle Group in Ferrographic Image for the Diesel Engine Lubricants
- Qualitative Assessment of the RCS Reduction Benefits on Detection Probability of an Armed Helicopter
- Automotive Route Planning Method for Minimizing the Radar Detection of an Armed Helicopter
- Study on Burnout and so2 Emission Characteristics during Co-Combustion of Petroleum Coke and Oil Shale in a Fluidized Bed
- Preparation of Electrospinning Polystyrene Nanofibrous Membrame and Nanofiltration for Simulated Dyeing Wastewater
- Research on Control System of Hybrid Regenerative Braking and Low Speed Energy Recovery
- Study on Tourism Ecological Footprint of Loudi City in Hunan “3+5” Urban Agglomeration
- Knowledge Acqusion Model via E-Learning in SNS Oriented Knowledge Community of Enterprise
- Trust Analysis in Social Network Community Research
- Preparation and Characterization of Polypropylene/Clay Nanocomposites
- Preparation and Characterization of Ionic Liquild Modified Clay and its Application in Polypropylene/Clay Nanocomposites
- Wavelet Packet Analysis Based Feature Extraction of Vehicular Acoustic Signal
- Research on the Approach of Reliability Allocation Based on D-S Theory
- Key Substitution Attack and Malleability of a Short Signature Scheme with Batch Verification
- A New Vibration Source Number Estimation Method Based on FFT
- The Behavior and Effect of Nano-Copper on the Interface in the Process of Sintering Fe-Base Powder Metallurgy Parts
- Calculation and Optimization Design of LJ276M Gasoline Engine Intake System
- Motor Vehicle Longitudinal Performance Roadway Test System Based on CAN Technology
- The Design of STATCOM Control System
- A Hybrid Method Based on HITS for Literature Recommendation
- Malicious Codes Detection Inspired by MHC
- Effects of Calcination Temperature on Photoreduction Activity of Cu/TiO2 Nanoparticles
- Connected Partial Hybrid-Type Target Coverage Model in Wireless Sensor Networks
- Peak Cycle Stress Analysis of the II Type Dent on Pipeline Based on FE Calculation
- Deformation Resistance Analysis and Simulation of Conic-Chamber Gun’s Interior Ballistics
- Periodic Point at Real Axis for a Generalized 3x+1 Function
- The Role of Footwear on Plantar Pressure Performance during Badminton Movements
- A Brief Research of the Internet of Things
- Research on Engineering Project Time-Cost Optimization Based on Particle Swarm Optimization
- Research on Variable Time-Domain Discrete Interpolation Control in Flexible Roll Forming
- Design of Simulation System for Batch Process
- Obstacles Perception for Serpentine Robot Based on Optical Flow Modules and Multi-Sensor Fusion
- Node Placement Strategies to Prolong Lifetime in One-Dimensional Linear Wireless Sensor Network
- Dynamical Simulation about Buffer Packaging of Computer
- Physicochemical Characterization of Chuanxiong Particles by Ultrafine Pulverization
- Experimental Research of Ultrasonic Motor Characteristics in Micro EDM
- Research on High Performance of Pantograph Slider Used by High Speed Train
- The Assessment of Grassland Ecosystem Services Value with GIS Technology in HulunBuir City of China
- Preparation of Zero-Valent Iron Nanoparticles and Study of Dispersion
- Effect of Beating and Fibre Furnish on the Properties of Silk Paper
- Design of Weld Seam Tracking Control System Based on DSP
- Synthesis and Characterization of Copper/Paraffin Nanocomposites for Thermal Actuation
- Synthesis and Characterization of Thermo-Sensitive Copper/Paraffin Nanocomposites
- The Effects of Nano Pt/Carbon Black Compound Coating on the Electro-Catalysis Properties of the Graphite Electrode
- Comparison of KP Pulping Properties between Heartwood and Sapwood ofCedrus deodara (Roxb.) G. Don
- The Influence of Micro-Arc Oxidation on Corrosive-Wear Behavior of Magnesium Alloy
- A New Hybrid Optimization Algorithm and its Application in Job Shop Scheduling
- Artificial Intelligence Optimization and Experimental Study of Auto Panel Stamping Process
- The Study on Operation Charateristic of Double-in and Double-Out Ball Mill Based on Data Mining
- Study on the Fault Diagnosis of Turbine Based on Support Vector Machine
- The Study of Risk Assessment on the Ship Oil Spill Diffuseness
- The Research on Maintain Efficiency of Industrial Maintenance System Based on Markov Analysis Model
- Design of a Gas Detection System Based on BP Neural Network
- Fault Diagnosis System Based on Dynamic Bayesian Network
- A Relative Colorimetric Rending Mapping Method Based on BP Neural Network
- The Portable Intelligent Monitoring System for Patient Based on Bluetooth Sensor
- Improving Genetic Algorithm Based Parameter Optimizing LSSVM Model for Tyre Regression
- Study on Field Emission Characteristics of Normal-Gated and Under-Gated Carbon Nanotube Cold Cathode
- The Effect of Central China’s Logistics Industry to Economic Development Based on Linear Regression Analysis
- Research on Approximation Measurement of Enterprise Information System Based on Object-Based Knowledge Mesh
- Study on Dynamic Performance of Step--Down DC-DC Converters
- Parameterized Model Design and Extension for Principal-Agent Incentive Mechanism
- Research on Compression and Rebounding of the Zoom Air in Sport-Shoes
- Mechanical Product Concept Extraction Method
- Preparation and Characterization of Cationic Emulsion of Styrene and Acrylate
- Management Effectiveness Calculation Model and Method of Government Performance Evaluation
- Game Analysis between Principal and Agent under Principal-Agency Relationship
- Dynamic Properties of Hydraulic Excavator’s Simulation and Analysis Based on ADAMS
- An Improved AHP Model Applied in Supply Chain Management
- Study on Geological Reserves Calculation Based on 3D Entity Model
- Application of Progressively Statistical Discriminant Models
- Influence of Composition and Hot Rolling Conditions on Microstructure and Texture of Nb-Ti Stabilized FSS
- Software Module Development for Free-Form Surface Five-Axis Machining Path and Tool Posture Simultaneous Optimization
- Study of Surface Roughness and Hardness of Medium Carbon Nickel-Chromium Based Alloy Steels under High Temperature
- Seismic Response Analysis Method of High Core Rockfill Dam
- Back Analysis on Mechanical Deformation Parameters of Columnar Jointed Rock Mass
- Optimal Management of Multi-Campus University: A Case in Jiangxi
- Structures and Catalytic Activities of LaSrCoO4 and LaSrCoO3.6F0.4 Mixed Oxides
- Study on Energy Design Factor for the Stage of Product Utilization
- On the Reasons of Social Security System Right Absence for Migrant Workers in China
- Research on Medical and Health Accounting and its Account System in China
- Functionary Mechanism of Technology Innovation on Industrial Competitiveness
- Empirical Study on Performance Evaluation of Regional Tourism in China
- An Empirical Research on the Relationship between Real Estate Prices and Inflation
- The Empirical Analysis of Market Performance of Automobile Industry Market in China
- On Industrial Cluster Development of Industrial Parks: A Case Study of Jiangxi Province in China
- Research Development of Biomedical Titanium Alloy
- Industrial Organization Analysis on Solar PV Industry (Solar Photovoltaic)
- Mathematical Model and Algorithm of Soy Sauce Quality Evaluation Based on Fuzzy Clustering
- Vibration Analysis of Train and Truss Girder Bridge
- Strategic Thinking about Development of Large-Scale Multinational Enterprises in China
- A Relationship Study of Automobile Manufacturing Enterprises and Small and Medium-Sized Supporting Ones from the Perspective of Symbiosis
- Thinking on Completing the Social Security Systems toward the Rural Migrant Workers in Cities
- Using Database Technology to Design the Computer Management System of University's Sports Meeting
- A Communication Channel Unblocked Reliability Model under Random Conditions
- A Kind of Reconfigurable Information System Based on Component
- Stability Analysis and Performance Evaluation of a Feedback Controller for Local Control of Sound
- Feature Extraction Accuracy Improvement of Acoustic Signals Based on Reassigned Wavelet Scalogram
- A Study on Boundary Modeling of Three-Dimensional Discrete Element Method Based on Pro/ENGINEER
- An Approach for Lean Product Innovation Management
- The Application of Multi-Agent Technology in the ASCM Model
- Displacement Analysis of the 3SPS-3CCS Mechanism Based on Hyper-Chaotic Three-Step Iterative Method
- Displacement Analysis of the 3SPS-3CCS Mechanism Based on Hyper-Chaotic Damp Least Square Method
- Forward Displacement Analysis of the 6-SPS Stewart Mechanisms Based on Hyper-Chaotic Damp Least Square Method
- Study on the Finite Element Numerical Simulation of Automobile Crossbeam Stamping Forming
- Study on Ultrasonic Micromateriel Transmission System
- Spectrum Features of Leakage Current on Contaminated Insulators
- Study of the Bearing Capacity of Single Gravelly Pile
- Based on the Theory of Thin-Walled Bar Flexure-Torsion Analysis of the Oblique Combined Structure
- Numerical Simulation of Die-Casting Magnesium Alloy Impeller with the Central Gating System
- Discontinuity and Convergency of Solutions for a Class of Linear Singular Switched Systems with Time Delay
- Thermal Performance Prediction of a Finned Plain-Plate Heat-Pipe for LED Lamp
- Research on Construction Method of Optimization Model between Customer Requirements and Product Technical Characteristics Configuration
- Development of Product Options for Modular Product Development
- Research of Embedded Internet Technology for Internet of Things
- Optimization Allocation Research of Enterprise Resources Based on Dynamic Programming
- Research and Realization Based on Content Video Retrieval
- RFID Enabled Signal Priority Strategies for Bus Operations
- Parametric Modeling Based on Orthogonal Milling Process
- A Study on the Design of Compound Die with Constant Blank Holder Pressure
- The Analysis and Study of Methods of Calculating Oblique Edge Shear Force
- A Study on the Closed-Loop Error Feedback Method of the Rapid Prototyping and Manufacturing Integrated System
- SpaceWire State Machine Verification Based on Model Checking
- Clustering Approach to Construct Knowledge Management for Statistics Concepts of University Students
- The Vibration Characteristics Analysis of Ship Foundation Based on the Arrangement of Isolators
- Variable Parameters of Military Electronic Components in High Temperature
- An Introduction to the New Kind Hydraulic Motor - Development and History
- The Force Analysis of the Planet Swinging Bevel Gear and Skew Shaft
- ГУЧТЬЯР Method to Determine the Base Circle Radius of Cams
- The Worm Transmission with Inconstant Addendum
- The Design of the Fly Wheel of the Shaper Machine Tool According to the Maximum and Minimum Angular Velocity
- Development of Parametric CAD System Based on Pro / Toolkit and Database Technology
Les mer
Produktdetaljer
ISBN
9783037850992
Publisert
2011-06-08
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
4500 gr
Høyde
240 mm
Bredde
170 mm
Dybde
120 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
2400
Redaktør