Materials Processing Technology, ICAMMP2011

Liu Xianghua Jiang, Zheng Yi Han, Jing Tao

Heftet / 2012 / Engelsk

Produktdetaljer

ISBN

9783037853269

Publisert

2012-02-23

Utgiver

Trans Tech Publications Ltd; Trans Tech Publications Ltd

Vekt

4600 gr

Høyde

240 mm

Bredde

170 mm

Dybde

126 mm

Aldersnivå

P, 06

Språk

Product language

Engelsk

Format

Product format

Heftet

Antall sider

2520

Redaktør

Liu Xianghua

Jiang, Zheng Yi

Han, Jing Tao

Materials Processing Technology, ICAMMP2011

Liu Xianghua Jiang, Zheng Yi Han, Jing Tao

Heftet / 2012 / Engelsk

Liu Xianghua Jiang, Zheng Yi Han, Jing Tao

Heftet / 2012 / Engelsk

Nettpris:

6.861,-

Levering 7-20 dager

These volumes comprise papers, on the topic of “Materials Processing Technology”, selected from the second International Conference on Advances in Materials and Manufacturing (ICAMMP 2011) held on the 16-18th December 2011 in Guilin, China. The 469 peer-reviewed papers are grouped into the chapters: 1: Advanced Engineering Materials, 2: Surface Engineering/Coatings, 3: Materials Forming, Machining and Joining, 4: Laser Processing, 5: Powder Metallurgy and Plastic Deformation, 6: Friction and Wear, 7: Waste-to-Energy, Waste Management and Waste Disposal, 8: CAD/CAE/CAM, 9: Product Design and Development, 10: Other Related Topics.

Les mer

<p>Selected, peer reviewed papers from the Second International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2011), December 16-18, 2011, Guilin, China</p>

Preface, Sponsors and Organizers
Chapter 1: Advanced Engineering Materials
Microstructures and Thermostability of Spray Formed Nb-Containing High Speed Steel
SERS Study of Malachite Green on Silver Nanocaps Arrays
Study on the Reaction of TDI and PPG with Organo-Tin Mixed Catalyst
Photocatalytic Degradation of Various Dyes by Strontium Titanate Nanoparticles
Study on the Heat-Press Bonding Optimum Technics of Stitchless Apparel
Technology Study of Polypropylene Hollow Fiber Membranes-Like Artificial Lung Made by the Melt-Spinning and Cold-Stretching Method
Novel Blend Films Prepared from Solution of Collagen and Cellulose in 1-Allyl-3-methylimidazolium Chloride Ionic Liquid
A Study of Clay Material Properties in Stop-Motion Animation
Direct Synthesis of Dimethyl Carbonate Form Methanol and Carbon Dioxide Using H₃PW₁₂O₄₀/Ce_0.1Ti_0.9O₂ with Ionic Liquid Catalysts
A Comparative Study on the Effects of FSS with Different Elements on the Characteristics of Radar Absorbing Materials
Characterization of Cobalt-Based Catalyst Supported on TiO₂ Nanofibers for Fischer-Tropsch Synthesis
Stress Analysis of Laminated Glass under Uniform Lateral Pressure
Hydrochloric Acid Corrosion Behavior of Nb₂O₅-Al₂O₃ Ceramics Prepared by Microwave Sintering
Synthesis and Crystal Structure of the Cobalt (II) Complex with Mixed-Ligand
A New Method for Processing Ceramics with Cracked Glaze
Growth of Cu₂ZnSnS₄ Thin Films by Sulfurization of Co-Sputtered Metallic Precursors
Investigation of the Bird Shape Effects on the Simulation Results of Bird Striking Laminated Aircraft Windshields
Surface Morphology and Infrared Absorption of Silicon Irradiated by Picosecond Laser Pulses in SF₆
Stimulation Mechanism of SDS Nanoemulsion in Tight Gas Reservoirs
Preparation and Characterization of Biodegradable Polylactic Acid/Gelatinized Cornstarch Foams
Study on the Treatment of High Salinity Oil Waste Water by Reverse Osmosis Technology
Study on the Kinetics and Optimization of Technological Process of Microwave - Vacuum Drying of Bleached Shellac
Modal Analysis of Montmorillonite in Bentonites Using Phase Mixing Equation
Synthesis of a Novel Fluorene Derivative for Polyfluorenes: 7,7'-di(5-bromothiophen-2-yl)-9,9,9',9'-tetraoctyl-2,2'-bifluorene
Study on In Situ Ti(CN) Particle Reinforce Composites Coating Processed by Nitrogen Shielded Arc Welding Technique
The Study on BFRP Binding Force of Secondary Compression Tests of Concrete Short Columns
Influence of Asymmetry on Extraordinary Optical Transmission through Periodic Arrays of Triangular Holes
Effect of Normalizing on Texture and Deep-Drawing Property of 10Cr17 Ferrite Stainless Steel
Viscosity and Optical Properties of Sodium Alginate Aqueous Solutions of High Concentrations
Study on Performance of Diesel Engine Supplied with Methanol-Diesel Blended Fuel
Preliminary Study on Nanometer Grouting Materials
Investigation of Simple Beam Stiffness Amended Model Based on Finite Element Analysis Results
Research on Pavement Performance with Warm Mix Asphalt Concrete
Synthesis of Phenothiazine Derivatives Containing Hetero Atom and Analysis of Conductive Polymer
A Composite Structure Multi-Parameter Sensor Based on an Embedded Fiber Grating
Influence of Reinforcing Materials on the Properties of Woven Spacer Fabric Composite Sandwich Panels
Preparation and Characterizations of Polysulfone Flat Ultrafiltration Membranes
The Effect of Percentage of Primary α on Mechanical Properties of Bimodal Microstructure of TC4
Effect of Polyurethane with Different Elastic Modulus on the Response of Aircraft Windshield against Bird Strike
Noise Suppression of Optical Voltage Transducer by a Robust Control
Study on the Calamine/Sodium Alginate Modified Viscose Fiber
Study on Refining Technology of Low-Sulfur Steel
Explosive Characteristic of Pulverized Coal Explosion
Potential of Energy Saving and Technical Measures in Sintering in China
Optimization of the Components of Medium Producing Dextran from Immobilized Cells of Leuconostoc mesenteroides
Picosecond Laser Microstructuring for Black Silicon Solar Cells
Study on Superelasticity and Microstructure of TiNiV Shape Memory Alloy by Medium-Temperature Treatment
The Utility Classification and Heating Process Analysis in Silicon Steel
Study on the Performance of Hydrophobic Association Water-Soluble Polymer with Strong Association Ability
Fabrication and Characterization of Regenerated Cellulose/TiO₂ Nanocomposite Hybrid Fibers
Fabrication of NiTi Alloy Coating on 2Cr13 Stainless Steel by Laser Cladding
Enhanced Corrosion Resistance and Damping Capacity of As-Cast AZ91 Magnesium Alloys with Ce Addition
Influence Study of Reinforced Fiber on the Impact Resistance Performance of Recycled Aggregate Concrete
Fuel Properties of a Two-Phase Biodiesel Emulsion
Coal Hybrid Heavy Aromatics Vehicle by Fuel of Experimental Research
The Influence of Thermal Exposure on the Microstructure Evolution of a Nickel-Base Single Crystal Superalloy
Effect of the Fibre Morphology and Aging Conditions on the Mechanical Properties of Hemp Fibers
Influence of Preparing Conditions on the Property of a New White-Light Long Afterglow Phosphor Sr₂SiO₄: Pr³⁺
Study on the Structure and Phase Transition of Sm Substituted BiFeO₃ Nanoparticles
Thermal Performance and Dehydration Kinetics of KAl(SO₄)₂•12H₂O as Phase Change Material
Preparation of Hexagonal Fe₃O₄ Nanometer Particles via Weakly Magnetic Field Assisted Oxidation Co-Precipitation
Properties of Nano-ZnO Films Deposited by RF Magnetron Sputtering for SAW Biosensors
Convenient Hydrothermal Synthesis of Zeolite a from Potassium-Extracted Residue of Potassium Feldspar
Preparation of Nano-Fibrous Poly(L-lactic acid) Scaffold with Hierarchical Pores
Behavior of Continuous FRP Rectangular Spirals as Shear Reinforcement for Concrete Beams
Study on the Nanoconfinement-Induced Breaking of Helical Symmetry in Metal Nanowires
Preparation of Three-Dimensional Ordered Macroporous Perovskite-Type LaFeO₃ Oxides
Preparation and Dielectric Properties of Dy-B-Si-O Glass-Doped Ba_0.6Sr_0.4TiO₃ Ceramics
Electrochromic Properties and Raman Spectroscopy Analysis of Tungsten Oxide Thin Film by RF Sputter
Probing Swelling and Shrinking Process of Polystyrene Film by In Situ Ellipsometry
Effect of Welding Residual Stress on Fatigue Performance of the Welded Joints Treated by Ultrasonic Peening
Synthesis of AlN Powders by Carbothermal Reduction-Nitridation Reaction of Nonhydrolytic Al₂O₃ Gels with CaF₂ Addition
Reduction Kinetics of Bayan Obo Coexisted Iron and Niobium Ore by Carbon-Bearing Pellet
Study on Microstructures and Mechanical Properties of AlSi9Cu3 Aluminum Alloy Fabricated by Liquid Forging
A Modified Coupling Method to Solve the Integrated Equations of Velocity and Temperature Fields in 3D FEM
Preparation and Ferroelectric Properties of Sol-Gel Derived (Ba_0.95Ca_0.05)TiO₃ Ceramics
Friction and Wear Behaviors of PTFE Composites Reinforced with Different Fillers
Unascertained Measurement Model for Water Safety Assessment
Adaptive Control Design for Hydrogen Production via Autothermal Reforming of Methanol
Study on Interfacial Tension and Flammability of Mg-Ca-Ce Alloy Melt
Removing of Si in the NaOH Molten Salt Reaction of Titanium Slag to Produce TiO₂
Coating of Ti64 Bearings in Air by Using a Q-Sw Laser
Morphologies and Crystal Phase Control of Calcium Carbonate Using “Crew-Cut” Micelles of Poly (styrene)-b-Poly (acrylic acid) as a Crystal Growth Modifier at Room Temperature
The Comparison of the Adsorption Performances of Phenol onto H103 Resin and XAD-4 Resin
Study on the Mechanical Properties and Frost Resistance of Recycled Concrete Prepared by Village Construction Wastes
A PMA-Based Collaborative Strategy for Reliability Design and Optimization of Multidisciplinary Systems
Synthesis of a Novel Donor Unit for D-A Type Polymers: 2,7-di(5-Bromothiophen-2-yl)-10-Hexadecyl-Phenoxazine
Study on Refining Technology for Reducing the Content of T[O] in Steel
Generation Characteristics of Polycyclic Aromatic Hydrocarbons during Blending Coal Coking
Preparation and Characterization of Multiwalled Carbon Nanotubes Deposited by Europium Hydroxide
Inhibited and Enhanced Spontaneous Emission Using Silicon-Based on Finite Thickness Photonic Crystal Waveguides
Evaluation of Relations among Basic Mechanical Properties of Concrete with Machine-Made Sand
Design for Optimal One-Dimensional Surface Profile of EVA on Solar Cell Modules
Corrosion Behavior and Mechanical Properties of Reinforcing Bar HRB400 in NaCl Solution
Influence of Nano-Serpentine on Tribological Behaviors and Wear Process of Hybrid PTFE/Kevlar Fabric Composites
Electrochemical Study on the Effect of Xanthine on Electrodeposition of Nanostructured Pt Thin Films and Pt(IV)-Xanthine Interaction
Fabrication of Unfired Porous Quartz Brick Used the River Sands from the Yangtze River in China
Study on the Properties of PVDF/LCP Blending Membranes
Review of Mix Proportion Design Methods for Fly Ash Concrete with Machine-Made Sand
Effect of Amorphous and Nanocrystalline Inoculant on Microstructure and Mechanical Properties of High Chromium Cast Iron
Study on the Stability of Insect Wax during Storage Period
Preparation and Properties of Thermo-Sensitive Molecularly Imprinted Hydrogels
Study on Rotary Object Recognition Technique from the Complex Background
Research on the Hydrothermal Processing of Mica-Titanium Pearlescent Pigment Precursor
Effect of Compression Ratio and Lay Angle of Metal Net on the Mechanical Properties of Metal Net-LVL Composite
Finite Element Simulation of Perfect Bonding for Single Fiber Pull-Out Test
Surface Topography of Vinyltriethoxysilane Films Deposited on the Silicon Dioxide Substrate (0001) Investigated by Atomic Force Microscopy
Continuous Cooling Transformation Behavior of Vercooling Austenite of Low Carbon-Manganese Steel
Study on Foam Properties of Alkylbenzene Sulfonate Gemini Surfactants
Research on the Confidence Interval of Indirect Detection
Effects of the Particle Size Variety of Metal Oxide on the Absorption Property of Long-Wavelength Infrared Laser
Preparation and Properties of Halogen-Free Flame Retardant Polyurethane Foams
Study on Dehydration Process of Wet Natural Rubber by Single Screw Dehydrator and Properties of Dry Natural Rubber
The Assembly Success Rate and the Estimation of Assembly Time for a Flexible Assembly System
Photocatalytic Activity of Bi₂O₃ Prepared by Different pH Value
Study on Influence of Modified SiC Nano-Powders on the Microstructures and Work-Hardening Properties of ZGMn13
Data-Conversion and Displaying for Numerical Simulation of EMCC with FEM-FVM-Joint Method
A Comparative Study of Monomers on the Preparation of Permselective Functional Packaging Materials
The Development and Performance Evaluation of Hydrophobic Association Polymer Pre-Cross Linked Particulate
The Impact of Reflux Ratio on Rectification Column Theoretical Plate Number
Reliability Study of CNC Machining Centers
Dyeing of Degummed Silk Fibers with Anthocyanins in Red Cabbage
Influence of Adding Different Poly (ethylene glycol) in the Biosynthesis of Bacterial Cellulose
An Experiment Study on Woven Fiber Reinforced Rubber Composite Armor against Shaped Charge Jet
The Preparation of Cu₂ZnSnSe₄ Films by Selenization of the Oxide Precursors
A Study on Microstructures and Creep Behaviors in the Mg-3Sr-xY Alloys
Finite Element Analysis of 5MW Fiberglass and Carbon Fiber Wind Turbine Blade
The Development and Performance Evaluation of Green Cross-Linked Movable Gel
Preparation and Characterization of Ni-Containing Aluminophosphate Molecular Sieves
The Effect of Reinforcement-Length of Carbon Fiber Reinforced Bonding Composites on Circular Tubes under Flexural Condition
The Effect of Uniaxial Stretching on the Crystallization Behaviors of Polylactic Acid Film
The Preparation and Characterization of Carbon Nanostructures Catalyst and its Catalytic Activity
The Pressure Gas Line Characteristic Curve Shape Based on Origin
Fabrication and Properties of the PVDF/PVDF-g-PMMA Blend Hydrophilic Membrane
Characterization of Five Natural Resins and Waxes by Differential Scanning Calorimetry (DSC)
A New Approach for Colloidal Crystal Fabrication with the Template of Reversible Stress Wrinkle
The Optimization Design of Laser Welded Sandwich Plate Structure
Effect of Si-SiC Additives on Properties of Tap Hole Clay
Theoretical Investigation of Energy Levels Splitting of CsCdBr₃:Pr³⁺ Crystal
Preparation of Highly Exfoliated Epoxy/Clay Nanocomposites by the Method of Ultrasonication Dispersion-Microwave Cure
Spatial Location of Zerovalent Iron Nanoparticles in Montmorillonite
Effect of Metal Intercalating on Transmission Characteristics of One-Dimensional Photonic Crystal
Synthesis, Electrical and Humidity Sensing Properties of BaTiO₃ Nanofibers via Electrospinning
Effect of In Situ Formed Mullite on Properties of High Alumina ULC Castables
Synthesis of Tung Oil Anhydride-Ester Polyol
Photolithography and Photochemical Reaction of Copolymer Containing Anthracene in Langmuir-Blodgett Films
Synthesis and Adsorption Properties of Crosslinked Starch Microspheres (CSM)
Indonesia Coal Explosive Characteristic of Pulverized Coal in Experiment
Preparation and Characterization of Aluminium-Doped SnS Thin Films
Condition Analysis of Nitrogen Remove from the Mixture of Municipal Wastewater and Fecal Sewage
Ferroelectric and Dielectric Properties of La₂O₃-Doped BaTiO₃ Ceramics
Comparative Study on Microstructure and Texture of Ti-IF Steel Sheets Produced by Different Hot Rolling Processing
Progress towards the Automatic Assembly of Carbon Nanotubes by Dielectrophoresis
Enhanced Optical Absorption in Modified One-Dimensional Metallic Photonic Bandgap Structures
Application of the Soil Nailing Wall on Foundation Engineering
Dislocation Generated by Electron Irradiation
Chapter 2: Surface Engineering/Coatings
The Characteristic of the Coating Prepared on Magnesium Alloy AZ91D by Micro-Arc Oxidization
Fast Electroless Ni-P Coating on AM60 Magnesium Alloy at Low Bath Temperature
Diagnosis of White Spot Defects Drived from Gear Wheel Carbonization and its Corresponding Measures
Simulation and Experimental Measurement of Ultrasonic Waves Propagation Velocity in Trabecular Bone
Primary Study on Electron Beam Surfi-Sculpt of Ti-6Al-4V
Reliability Laboratory Analysis of PCB Surface Coating Based on ENEPIG
Self-Protection of Flux-Cored Wire Surfacing is Applied to the Enhancement of Chute Lining Board
Fe-Based Amorphous/Nanocrystalline Coating on AZ91 Magnesium Alloy Substrate Deposited by Automatic High Velocity Arc Spraying
A Study on Brazing Process and Mechanical Properties of AZ31 Magnesium Alloy
Preparation and Characterization of Sm³⁺ Doped CBS Transparent Glass-Ceramics
Effect of Refractory᾽s Thermal Conductivity on the Thermal Stress Field of the COREX Gasifier Top
Characterization of Ceramic Coatings on ZL114 Aluminum Alloy Prepared in Alkaline Electrolyte Adding Nano-Al₂O₃ by Micro-Arc Oxidation
Optimization of Process Parameters for Electroless Ni-P Plating on AZ91D Magnesium Alloy by Phosphate Pretreatment
Applications on Nanocomposite Coating Technology in Plastic Injection Mould Cavity Surface Treatment
A Surface Melting Infiltration Study on Cast Magnesium Alloy
Mechanical Properties of ADC12-6061 Aluminium Alloy Joints Produced by Friction Stir Welding
Technical and Structure Study of Coprecipitation Method for Nano-Titanium Dioxide
Effect of Ce on Wear Behavior of Plasma Spray Welded Novel Aluminum Bronze Coatings
Study on Preparation and Performance of γ-Ray Protection Coating
An Improved Tool Path Model Including Gyroscopic Effect for Instantaneous Cutting Force Prediction in High-Speed Milling
Influence of Organic Sealed on the Corrosion Behaviors of Micro Arc Oxidation Coated ZM5 Magnesium Alloy
Numerical Study on Uniaxial Compression Test of Rock Specimen with Random Holes
Research on Surface Coating Technology of PCB Based on ENEPIG
Influences of Pulse Current Density on the Characteristics of Ni-W-P-CeO₂-SiO₂ Composite Coatings
Non-Abrasive Cryogenic Polishing Device on Cylindrical Surface Based on Recurdyn Dynamic Simulation
Optimization of Diamond-Coated Drawing Dies for Stainless Steel Tubes Based on the FEM Simulation
Molecular Dynamics Simulation of Au-TiO₂ Catalysts: Deposition of Gold Nanoclusters on Rutile (110) Surface
Self-Assembly of Large Scale and High-Quality Colloidal Particle Films by Spin-Coating
The Influence of D-SRRs’ Geometry Dimension on the Resonant Frequency in the LHMs
Effect of Slit Structure of Purging Plug on Stress Field
Investigation and Evaluation of the Safety Properties of Hardwood Athletic Floor System in China
Fracture Analysis of the Tearing NBR Aged at Different Temperature
Study on Surface Roughness Transformation during Metal Rolling
Hygrothermal Characterization of Porous Building Materials-New Research Method on Water Vapor Transmission
Study on the Preparation and Properties of Low Permeability Coating
Enhancing the Sinterability of Chemically-Derived Tl1212 Superconducting Powders Using Nano-Sized MgO as Sintering Aid
Study on Oil-Ash Corrosion and Coal-Ash Corrosion Occurred in the Flue-Gas Side of Fossil Power Plant
Comparison of Lu₃Al₅O₁₂:Ce and LaBr₃:Ce Scintillators in Gamma-Ray Spectrometry
Research on Bonding Technology Match of ENEPIG PCB of Digital Microphone
SHS-TiC Particle Reinforced Hardface Coating Prepared by Vacuum Cladding Process
Effect of Process Parameters on Deposition Rate of Electroless Ni-P Plating on AZ91D Magnesium Alloy
Failure Analysis on the Exhaust Steel Tube Explosion of Natural Gas Compressor
Hygrothermal Characterization of Porous Building Materials-Experiment Research on Isothermal Sorption and Capillary Problem
Study on Surface Modification of Pure Magnesium and Magnesium Alloy with High Current Pulsed Electron Beam
Study on the Heat-Oil Resistance Capacity of Surface Chemically Modified Nitrile Rubber
Surface Topology Optimization of Air Bearing Slider for Wear Durability in Magnetic Hard Disk Drives
Mixture Experiments Design Including Interactions with Process Variables for Applications in Paint Preparation
The Influence of Argon Flow on Inclusion Characteristic and Fatigue Life of Continuous Casting Bearing Steels
Inhibition Effect of Compound Boricacidester on the Tungsten Carbide Leaching of the Cemented Carbide Tool
Research and Evaluation on the Planning and Sanding Properties of Mytilaria laosensis
Analysis of Flue-Gas Side Abrasion in Thermal Power Plant Boiler
Fatigue Analysis of the Drill String According to Multiaxial Stress
Effect of Refractory᾽s Thermal Expansion Coefficient on the Stress Field of the Top of Gasifier
The Analysis of Nitrogen Removal Performance for Eco-Ceramic Concrete Biofilm Reactors
Mechanism Analysis and Experiment Study on RC Composite Core Walls
The Morphology Evolution of Vapour Phase Aluminide Coating on a CMSX4 Single Crystal Superalloy
Idealisation and Formulation in Structural Dynamics Using Modal Analysis
Impact of Shaft Coaxiality on the Local Stiffness of Angular Contact Ball Bearing
Thickness Distribution Model of Condensate on Rotary Substrate by EB-PVD
Deformation and Heat Transfer Analysis for High Speed Dieless Drawing of AZ31 Magnesium Alloy Tubes
Inhomogeneous 3D Finite Element Model for Prediction of Free Surface Roughening
Electrical and Flexural Properties of Copper and Graphite Filled Phenolic Resin Composites
Research on the Counterweight in the Process of Diamond Wire Saw Cutting Polysilicon
Study on the Dielectric Properties of CaCu₃Ti₄O₁₂ Ceramics by the Brickwork Layer Model
A Dynamic Dispatching Method of Resource in Cloud Computing Environment
The Simulation Study on the Rules of Spatial and Temporal Changes of Total Nitrogen in Semi-Aerobic Landfill Leachate in the Laboratory
The Effect of Bonding Length on the Flexural Performance of Carbon Fiber Epoxy Matrix Composite Tubes
Microwave Devulcanization of Waste Rubber with Inorganic Salts and Nitric Acid
Effect of Hydrogen Charging on Microstructure Morphology of Warm Rolled Low Carbon Steel
Chapter 3: Materials Forming, Machining and Joining
Numerical Analysis for the Bending Process of Profile with Stiffener
Study on the Static Recrystallization of E36 Ship Plate with Continuous Hot Rolling Process
Study on Mechanical Behaviors in Friction Stir Welding of 6061-T4 T-Joints
Electrochemical Behavior of Corrosion Resistance Alloys
A Welding Gun Height Detection Method in Compulsively Short Circuiting Transfer Mode of Rotational Arc GMAW
Experimental Analysis of Residual Stresses in Cold Formed Truck Frame Side Rail Structures
The Effect of Modification and Heat Treatment on Low Chromium White Cast Iron
Development of a Combined Shape and Gauge Control Scheme Based on Function Φ
Characterization of Bolt Hole Residual Stresses for Assessing Structural Behavior of Truck Frame Rails
High Efficiency Precision Surface Grinding of Fused Silica
Measurement of Dynamic Resistance in Resistance Microwelding of Insulated Copper Wire
Experimental Investigation on High-Speed Milling of Aluminum Alloys
Chip Prediction in Finite Element Modeling of the Chip Formation Process during Cutting Ti-6Al-4V Alloy
Investigation of Temperature Distribution in High-Speed End Mill Assisted by Heat Pipe Cooling
Mechanics of Design and Model Development of CVC-Plus Roll Curve
Study on Combined Process of Micro-EDM and Electrorheological Fluid-Assisted Polishing
Effect of Ni-Coated Carbon Nanotubes on the Corrosion Behavior of Sn-Ag-Cu Solders
Impact of Heat-Treated Microstructure on Milling Performance of Ti-6Al-4V Alloy
Droplet Tracking in Double-Electrode GMAW
Effect of Heat Input on Structure and Mechanical Properties of Low Matched Welded Joint in a 1000MPa Grade Steel
The Research on the Algorithm of Rubber Parts Forming Die Dimension Based on Mid-Difference Value Method
Numerical Simulation of Fiber Orientation of Short Fiber Reinforced Polypropylene in Injection Molding
Characteristic Analysis of Grinding Point Movement in Grinding Aspheric with Arc Envelope Grinding Method
Evaluation of Welding Residual Stress Based on Temper Bead Welding Technique
The Effect of Preheating Temperature on the Microstructure and Properties of Copper by the Liquid Die Forging Technology
Parametric Design of the Fish-Tail Die Channel Based on SolidWorks
Microstructure Evolution and Numerical Simulation of DP Steel TWBs During Warm Tensile Deformation
Experimental Investigation of Surface Roughness in High Speed Turning of Hardened AISI P20 Steel
Research on Roll Force for Variable Gauge Rolling
Prediction and Investigation of Surface Quality in High Speed End-Milling of Silicon to Eliminate Conventional Finishing Operations
Effect of Brazing Temperature and Clearance on Microstructure and Mechanical Properties of 316L Stainless Steel Brazed Joints
Exploration on Continuous Extrusion Process Originate from Friction for Polymer
The Dimension Accuracy Analysis of Multi-Wire Flat Rolling Process
Strain Hardening Analysis Coupled to Remeshing Procedure Application to Sheet Hydroforming Processes
Effect of Temperature on Shear Strength of Adhesively Bonded Joints for Automobile Industry
The Research of Characteristic Agent Used in Cold Bending Centre Sill
Research of Die Cavity Warm Extrusion on 3Cr2W8V Steel One-Off Forming Technology
Constitutive Equation of ZL201 Alloy during the Semi-Solid Thixotropic Compression
Mechanical Properties of Aluminium-Alumina Welding by Friction Welding
Multi-Cutting Passes for a Fine-Cut Wire Electro Discharge Machining of Stainless Steel
Experimental Investigation and Analytical Calculation of the Bending Force for Air Bending of Structured Sheet Metals
The Production of Poly(L-lactic acid) from 2-Steps Direct Polycondensation in 100 Kg Scale
Experimental Investigations of the Machinability of Titanium Alloy TC4 with Different Hydrogen Contents
Vibration Analysis of Single Lap Adhesive Joint with Non-Uniform Adhesive Thickness: Experimental and Analytical Investigation
Effect of Cooling Rate on Microstructure of Simulated CGHAZ for Modified High-Cr Ferritic Heat-Resistant Steel
Study on Deformation Coordination in Upsetting Forging Process of the Crank of Continuous Fiber Crankshaft for Marine
Large Scale Molecular Dynamics Simulation of Femtosecond Laser Ablation of Silicon Using Sensing-VISICOM
Study on Parameters Optimization of Ceramic Machining Process
Techanics Study on PcBN Cutting Tool Dry Turning Chilled Cast Iron
The Mixing Condition and Mechanical Property of Friction Stir Welded Dissimilar Formed 3003 and 6061 Al Alloys
Development of Experimental Devices for Tube Hydro-Forming
Experimental Study of Vibratory Turning with Low Frequency of the Mechanical Vibration Device and on the Surface Texture
Optimization of Parameters and Research on Joint Microstructure of Resistance Spot Welding of 201 Stainless Steel
The Influence of N Values on Sheet Metal Deep Drawing Based on Different Blank Holder Forces
Corrosion Behavior of 6082-T6 Al Joint Welded with Twin Wire MIG
A Novel Material Preparation of Density Ceramics and Fibre Joining
An Automatic Control System Based on Arc Voltage of TIG Welding
PZT Thin Films from Bulk PZT for Vibration Power Harvester Applications
Gas Forming a V-Shape Aluminum Sheet into a Trough with Contour Like the Back of a Twin-Hump-Camel
Electrochemical Behavior of Welded Joints with 308L Stainless Welding Wire and Low Temperature Transformation Welding Wire
Effect of Metal Inert Gas Welding on Microstructure and Mechanical Properties of Al-Zn-Mg Alloy
Principle of the Continuous Variable Cross-Section Recycled Extrusion (CVCE) Process
Study of Combined Process in Micro-EDM
Investigation on Formability of AISI 304 Circular Cups by Warm Deep Drawing
Impact of Cutting Tool Geometric Parameters on Milling Titanium Alloy TC4
Effect of Current on the Interfacial Structures of the Dissimilar Metals Diffusion Bonding
Surface Roughness Prediction in Ball-End Milling Process for Aluminum by Using Air Blow Cutting
Static Recrystallization and Precipitation Behaviors of Weathering Steel for Bridges
Elastic Deformation Predicting Design and Numerical Simulation for an Asymmetry Multi-Mandrel Aluminum Extrusion Die
Preparation and Properties of UV-Curable Adhesives Based on Epoxy Acrylate Prepolymers
Optimization on Resistance Microwelding Procedure of Fine Copper Wire Based on Orthogonal Experiment Design
Mechanical and Electrical Properties of Graphite/Carbon Fiber/Phenolic Resin Composite
Numerical Simulation of Thixo-Diecasting Al6061 Alloy Automobile Part
The Failure Mechanism of Cemented Carbide Milling Insert during Machining Difficult-to-Cut Metal
BP Neural Network Model for Seam Tracking Offset during High-Power Fiber Laser Welding
Hot Forming Behavior and Flow Stress Model of Steel 50A1300
A New Algorithm for Solving the Best-Fit Sphere of Optical Aspherical Surface
Design, Development & Experimental Investigation of Electro-Discharge Diamond Surface Grinding of Ti-6Al-4V
Development of Tooling Cost Model for High Speed Hard Turning
FEM Prediction of Welding Residual Stresses and Temperature Fields in Butt and T-Welded Joints
Effect of Temperature on Microstructure and Mechanical Properties of 316L Stainless Steel Brazed Joints
Effects of Thickness Ratio on Interface Characteristic and Mechanical Properties of Ti/C Laminated Composites
Machining a Micro-Scale Structure Using an in-House Developed Miniature Machine Tool
Effects of pH on the Growth of ZnO Nanorod Arrays in Aqueous Solution
Study on Dynamic Mechanical Properties of n-HA/PA66 Composites
Method of Analyzing the Size of Voids Beneath Rigid Pavement Slabs
Microstructure and Mechanical Properties of Friction Stir Welding Joint of Pure Copper
Chapter 4: Laser Processing
Process Optimization and Properties of Laser Cladding High Speed Steel Coatings on Nodular Cast Iron
Ni₃Al-Base Alloy of Laser Welding Behavior Research
Effect of Scanning Path on the Thermal Stress of Titanium Alloy in the Laser Cladding
Passive Laser Assisted Bending of Ultra-High Strength Steels
Study on the Straight Edge Diffraction Effects of Base Model Gaussian Laser Field
Landslide Risk Assessment Expert System Along the Oil and Gas Pipeline Routes
Effects of Hot Extrusion Processes on Grain Size of ZK60 Alloy Tubes
Epitaxial Growth of Ni-Based Superalloys Using Laser and Spark Deposition
Study and Design of Human-Machine Interface System for Embedded CNC Precision Internal Grinder
Chapter 5: Powder Metallurgy and Plastic Deformation
Magnetic Abrasive Finishing – A Review
Mn_xZn_1-xO Crystal Synthesized by Hydrothermal Method
Strain Analysis of NC Incremental Sheet Metal Forming
Purification of Metallurgical Grade Silicon by Slag and Acid Leaching Treatment
Effect of Heating Temperature on the Microstructural Evolution of Al-5.8%Zn-1.63%Mg-2.22%Cu-0.12%Zr Gas Atomized Powders
Chapter 6: Friction and Wear
Effects of Annealing Technique on the Microstructure and Mechanical Properties of AZ31B Magnesium Alloy Sheets
Theoretical Investigation on Prestress during the Manufactural Process of Integrated Multilayer Wrapped Pressure Vessel
Investigation of Crack Initiation and Propagation during Rolling Contact Fatigue of SUJ2 Steel Bearings Using a Newly Developed One-Point Testing Machine
Influence of Vibration on the Heat Transfer of Lost Foam Casting Filling
Simulation to Static Recrystallization of Nb Micro Alloyed Steel by Cellular Automaton
Wear Resistance Improvement of Titanium Bearings by Laser Gas Nitriding
Study on Ultra Fast Cooling Technology in Hot Strip Mill
Numerical Simulation on Electron Beam Welding Temperature Field of Al-Li Alloy
Evaluation of Non-Uniform Deformation of Multi-Layered Ceramic Sheets with Printed Electrodes during Compression
Chapter 7: Waste-to-Energy, Waste Management and Waste Disposal
Treatments of Magnesium Slag to Recycle Waste from Pidgeon Process
The Feasibility Analysis of Ice Making System Driven by Liquid Nitrogen Engines and Heat Source is Diesel Exhaust
Wax Formation Study by the Pyrolysis of High Density Polyethylene
Non-hydrogen Catalytic Dewaxing for Oil Production
Relating Analysis of Multi-Parameters of Constructed Wetland
Influence of Refractory᾽s Poisson’s Ratio on the Stress Field of COREX Gasifier Top
Ultrasonic Characteristics of the Ultrasonic Grinding Process about the Nano-Ceramic Plate
Exact Traveling Wave Solutions to a Model for Solid-Solid Phase Transitions Driven by Configurational Forces
Analysis of Heat Transfer and Straightening of Continuous Casting Slab Using 3D Finite Element Method
Chapter 8: CAD/CAE/CAM
Application of Machine Vision in Grading and Identification of Grafting Seedlings
An Approach to Analyze Pose Accuracy of Master Slave Surgical Robot with Matlab
Comparison of Three Hydraulic Unloading Schemes for a Screw Press
Semi-Continuous Extraction of Agarwood Oil with Subcritical Water: Optimization of Plug Flow by Response Surface Methodology
Experimental Study of Light Intensity on I-V Characteristic of Single Crystalline Silicon Solar Cell
Micro-Machined Variable RF Capacitor Based on Glass Substrate
Fractal Study on Blank Residue of Mould Cavity
Classification of Fresh N36 Pineapple Crop Using Image Processing Technique
Finite Element Analysis of Axial Stiffness of Extruded Sealing Ring Used in Aviation Engine
Vibration Modal Analysis of Involve Gear with Asymmetric Tooth Profile and Double Pressure Angles
Neodymium-Iron Garnet Crystallite and its Magnetism Prepared by a Hydrothermal Method
Design of Temperature Control System Based on Fuzzy PID
Development and Application of YS Silver Catalysts for Ethylene Epoxidation
Hardness and Impact Toughness of Niobium Alloyed Austempered Ductile Iron
Experimental Study on Improved Phase-Shift Control Soft-Switching Converter
Kinematics Analysis and Precision Design for a 2-DOF Spatial Mechanism
Numerical Study on Ventilated Supercavitation Reaction to Gas Supply Rate
Analysis and Simulation of Strong Earthquake Ground Motions Using ARMA Models
Stress Analysis and Life Estimation of Staged Prestressed Combined Cavity Die
Pressure Pulsation System in Electro-Hydraulic Control Valve of Engineering Mechanical
New Method for Measuring Liquid Level in WFGD System
Microstructure and Properties of Roller Surface Alloyed by Laser
Supply Chain Quality Information Management Methodology and Application System Research
Dynamic Analysis of Motorcycle Engine Rod Bending and Fracture Failure
Simulation and Application of Fuzzy Control System with Integrator
Research on Thermal Analysis of Pillow Spindle System with Multi Axes Rotary Spindle Head
Application of Desulfurization Additive in Desulphurization System for 600MW Units
The Measurement Method to Position Coordinates of Movable Platform for 3-TPT Parallel Machine Tool
Study on Automobile Engine Vibration Test Based on LabView Software
Investigation of Ion Transport and its Effect on the Photovoltaic Performance in the Quasi-Solid State Dye-Sensitized Solar Cells
Machining Process Analysis and Parametric Programming of Parts with Complex Surfaces
Research on Porous Sprayer for Refining of Aluminium Melt
Humidity Sensing Property of Mesoporous Indium Oxide
Responses and Optimization of a PID-Based Speed Regulating System of the Planetary Mixer
Conductivity Studies on Li_1-XAl_xTi_2-X(PO₄)₃ (X=0.0-0.5) Due to the Addition of Al³⁺ Trivalent Cation
Effect of Vortex Generators on Aerodynamic Characteristics of a Car
Research of Inspection System Based on Machine Vision for Steel Rod Surface Defects
Status and Development of the Flexible Manufacture Technique with Direct Spinning of the Polyester Textile Fibers in China
Suppression of Chatter Vibration by Fuzzy Sliding Mode Control in Machining Processes
The Research of CAD System in Three-Plate Parallel Indexing Cam Mechanism
Machinability Evaluation of Difficult-to-Cut Materials Based on Variable Processing Cost per Unit Material
The Modeling Study of Active Power Filter Based on Adaptive Notch Filter
Fabrication of Metal Micro Needle Array by LIGA Process
Interval Granules in Incomplete Information Systems
A Case-Based Reasoning Combined with AHP Wighting for Cutter Conceptual Configuration Prediction Model
A Inductive Accelerator Based on UV Lithography of SU-8
Experimental Research on TC4 Alloy by Laser Shock Processing
Effect of Axial Pressure and Tool Rotation Speed on Temperature Distribution during Dissimilar Friction Stir Welding
Design and Optimization of Expert Database System for Cast and Roll Production of Copper Tubes
Design Research on Feeding Paper Machine of Printing Press
Study on the Shape of Occurrence and Developing of Evaporation Wave in Short Pipe
Analysis of Aperture Phase Errors Using Interval Method
Research of Collision Probability and Teaching Platform for Wireless Network Transmission Interference Analysis
Drainpipe Network Management Information System Design Based on GIS and DSS
Study on Shaped New Technology of Tractor Clutch Gears
Automatic Matching Based on Dynamic Threshold in Close-Range Photogrammetry
Study of Backwashing Process for Ceramic Micro-Filtration Membranes Used in Pretreatment of DMF Wastewater
Virtual Assembly of Product and Assembly Procedure Planning Based on Morphological Analysis by Matrix
Research on Boom-Type Roadheader Vibration Testing Based on the LabVIEW
Research on Opening and Closing Process for Outdoor Vacuum Circuit Breaker Contacts
The Development of Breakout Prevention System by Logical Judgement
Surrounding Rock Stress and Deformation Evolution Character Analysis of Circular Openings in Deep Underground Engineering
Research Analysis and Experiment Study on Flow Field of Hydrodynamic Coupling
Impact of JIT and TQM Strategies on Searching for Health Information and Ensuring Service Quality in Hospitals
Ergonomic Analysis of the Master of Minimally Invasive Surgical Robot
Influence of Different Pore-Forming Mechanism on Superfinish Grinding Tools
Change Detection of Coastal Landscape Pattern Using GIS: a Case Study of Tianjin Binhai New Area
A Combined Modeling Method Based on Multiple-Sensor Integrated Measuring System for Reverse Engineering
Influence of Thermal Behavior of Spindle on Machining Accuracy in Micro-Endmilling
Simulation on Anode Electric Field Intensity about Electrochemical Jet Machining
Structural Analysis of Mechanism with Compound Hinges in Ordinal Single Opened Chain Theory
Analysis and Optimization of the Static and Dynamic Characteristics of Head Frame
The Effect of Helical Gear Parameters on the Meshing Noise
Parameters Optimization and Theoretical Analysis on Duckbill-Type Device for Sugar Beet Paper Pot Seedling Transplanting
Optimization Design of Kinematics Performance of High-Speed Spatial Parallel Coordinate Measuring Machine
Study on Narrow-Gauge Traction Locomotive Control System
Review on Construction Method of Subway Station
Development of Nanomaterials Electrochemical Biosensor and its Applications
Study on Dynamic Simulation Technology of Polar Coordinates Wafer-Handling Robot
Research on Steel Cord Belt Electromagnetic Testing Real Time Monitoring Technology
Influencing Factors on Dynamic Response of Hydrostatic Guideways
Body Fitted Grids Based FVM Simulation of Aluminum Extrusion Process
Modeling and Simulation of Electromechanical Coupling Dynamics for Permanent Magnet Synchronous AC Servomotor
Coupling Control and Analytical Model of the Shaker on a Centrifuge
Annual Runoff Prediction Based on Least Square Support Vector Machines-Markov Chain Combined Model
Composite Measurement Method Based on Computer Vision Technology
Cost Modeling and Simulation for Mining Mechanical Equipment Undergoing Maintenance
Research Advance of Electrochemical Sensor Fabricated with Nanomaterials and their Application
Fluiding Characteristics of Pulverized Coal in Fluidization & Injection Jar
The Primary Processing of MEMS Devices and Applications Analysis
Study on Cavitation Mechanism of Pulse Electrochemical Compound Machining
The Learning Styles of Taiwanese Mechanical Engineering Students
Research on Micro Electrical Discharge Milling Technology of Miniature Thin-Walled Impeller
Abrasive Jet Polishing of Micro Groove Using Compound SiC Abrasives with Compound Additives
Chapter 9: Product Design and Development
Design of Active Phased Array Antenna in Wind Profiling Radar
The Creative Design of Injector Clamping Mechanism
Digital Jacquard Fabric Design with Visual Illusion Effect Based on Half-Backed Structure
An Incremental Innovation Design Process Model Based on TRIZ
Reliability Assurance Measures of CNC System Software
Controlled Release of Tablets Containing Poorly Water Soluble Model Drug Coated with Kollicoat MAE 30DP
Function Modeling, Solving and Simulation Based on Effect in TRIZ
Modal Analysis of the Hydraulic Retarder Shell
Hedonic Price Analysis on Mobile Phone Market
Modular Decomposition of Flow Chart Path Method and its Application
Innovative Design of a New Differential Brake
Design Principle and Method of Visual 2.5D Effect Black-and-White Digital Jacquard Fabric
Application Research of SWOT Analysis in Enterprise Patent Portfolio Strategy
Design of Injection Mould for Back Shell of Radio
Increasing Solubility of Poorly Water Soluble Drug Resveratrol by Surfactants and Cyclodextrins
Design and Development of Non-Ironing Fabric of Cotton/Fractal Polyester Twisted Yarn
Chapter 10: Other Related Topics
Research on Kraft Pulping Delignification of Bamboo (Neosinocalamus)
Study on Application of Characteristics of the Decorating Material in the Interior Space Design
Bifunctional Pt-Molecular Sieve Catalysts for Hydroisomerization of Long-Chain Olefins
Study of Test Site Construction for Passenger Car Working in Low Temperature
Impregnation of Ru(cod)(tmhd)₂ into PDMS Film in Supercritical Carbon Dioxide
Effect of Voltage Pattern on Intensity of Electromagnetic Emission during Electric Flame-Off Process of Ball Bonding Machine
Performance Test Specification for Passenger Car in Low Temperature
Color Prediction for Weft-All-Coloring Jacquard Fabric Based on the Two-Constant Kubelka-Munk Theory
The Research of the Equipment Manufacturing Industry Development Strategy of Fuxin
Contributions of Microorganisms to Nitrogen Cycle of Wuyiling Wetland in Yichun in Northeast China
The Study of Power Unit of a Wind-Magnetic Water Heater
Effect of Chlorination Conditions on Amount of THMs
Ecological Safety Analysis and Statistics Measures of Wuyiling Wetland in Yichun in Northeast China
Enzymatic Degradation of Polyester-Nanoparticles by Lipases and Adsorption of Lipases on the Polyester-Nanoparticles
Study of Fire Control Safety of High-Rise Building and Countermeasures

Les mer

<p>Selected, peer reviewed papers from the Second International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2011), December 16-18, 2011, Guilin, China</p>

Preface, Sponsors and Organizers
Chapter 1: Advanced Engineering Materials
Microstructures and Thermostability of Spray Formed Nb-Containing High Speed Steel
SERS Study of Malachite Green on Silver Nanocaps Arrays
Study on the Reaction of TDI and PPG with Organo-Tin Mixed Catalyst
Photocatalytic Degradation of Various Dyes by Strontium Titanate Nanoparticles
Study on the Heat-Press Bonding Optimum Technics of Stitchless Apparel
Technology Study of Polypropylene Hollow Fiber Membranes-Like Artificial Lung Made by the Melt-Spinning and Cold-Stretching Method
Novel Blend Films Prepared from Solution of Collagen and Cellulose in 1-Allyl-3-methylimidazolium Chloride Ionic Liquid
A Study of Clay Material Properties in Stop-Motion Animation
Direct Synthesis of Dimethyl Carbonate Form Methanol and Carbon Dioxide Using H₃PW₁₂O₄₀/Ce_0.1Ti_0.9O₂ with Ionic Liquid Catalysts
A Comparative Study on the Effects of FSS with Different Elements on the Characteristics of Radar Absorbing Materials
Characterization of Cobalt-Based Catalyst Supported on TiO₂ Nanofibers for Fischer-Tropsch Synthesis
Stress Analysis of Laminated Glass under Uniform Lateral Pressure
Hydrochloric Acid Corrosion Behavior of Nb₂O₅-Al₂O₃ Ceramics Prepared by Microwave Sintering
Synthesis and Crystal Structure of the Cobalt (II) Complex with Mixed-Ligand
A New Method for Processing Ceramics with Cracked Glaze
Growth of Cu₂ZnSnS₄ Thin Films by Sulfurization of Co-Sputtered Metallic Precursors
Investigation of the Bird Shape Effects on the Simulation Results of Bird Striking Laminated Aircraft Windshields
Surface Morphology and Infrared Absorption of Silicon Irradiated by Picosecond Laser Pulses in SF₆
Stimulation Mechanism of SDS Nanoemulsion in Tight Gas Reservoirs
Preparation and Characterization of Biodegradable Polylactic Acid/Gelatinized Cornstarch Foams
Study on the Treatment of High Salinity Oil Waste Water by Reverse Osmosis Technology
Study on the Kinetics and Optimization of Technological Process of Microwave - Vacuum Drying of Bleached Shellac
Modal Analysis of Montmorillonite in Bentonites Using Phase Mixing Equation
Synthesis of a Novel Fluorene Derivative for Polyfluorenes: 7,7'-di(5-bromothiophen-2-yl)-9,9,9',9'-tetraoctyl-2,2'-bifluorene
Study on In Situ Ti(CN) Particle Reinforce Composites Coating Processed by Nitrogen Shielded Arc Welding Technique
The Study on BFRP Binding Force of Secondary Compression Tests of Concrete Short Columns
Influence of Asymmetry on Extraordinary Optical Transmission through Periodic Arrays of Triangular Holes
Effect of Normalizing on Texture and Deep-Drawing Property of 10Cr17 Ferrite Stainless Steel
Viscosity and Optical Properties of Sodium Alginate Aqueous Solutions of High Concentrations
Study on Performance of Diesel Engine Supplied with Methanol-Diesel Blended Fuel
Preliminary Study on Nanometer Grouting Materials
Investigation of Simple Beam Stiffness Amended Model Based on Finite Element Analysis Results
Research on Pavement Performance with Warm Mix Asphalt Concrete
Synthesis of Phenothiazine Derivatives Containing Hetero Atom and Analysis of Conductive Polymer
A Composite Structure Multi-Parameter Sensor Based on an Embedded Fiber Grating
Influence of Reinforcing Materials on the Properties of Woven Spacer Fabric Composite Sandwich Panels
Preparation and Characterizations of Polysulfone Flat Ultrafiltration Membranes
The Effect of Percentage of Primary α on Mechanical Properties of Bimodal Microstructure of TC4
Effect of Polyurethane with Different Elastic Modulus on the Response of Aircraft Windshield against Bird Strike
Noise Suppression of Optical Voltage Transducer by a Robust Control
Study on the Calamine/Sodium Alginate Modified Viscose Fiber
Study on Refining Technology of Low-Sulfur Steel
Explosive Characteristic of Pulverized Coal Explosion
Potential of Energy Saving and Technical Measures in Sintering in China
Optimization of the Components of Medium Producing Dextran from Immobilized Cells of Leuconostoc mesenteroides
Picosecond Laser Microstructuring for Black Silicon Solar Cells
Study on Superelasticity and Microstructure of TiNiV Shape Memory Alloy by Medium-Temperature Treatment
The Utility Classification and Heating Process Analysis in Silicon Steel
Study on the Performance of Hydrophobic Association Water-Soluble Polymer with Strong Association Ability
Fabrication and Characterization of Regenerated Cellulose/TiO₂ Nanocomposite Hybrid Fibers
Fabrication of NiTi Alloy Coating on 2Cr13 Stainless Steel by Laser Cladding
Enhanced Corrosion Resistance and Damping Capacity of As-Cast AZ91 Magnesium Alloys with Ce Addition
Influence Study of Reinforced Fiber on the Impact Resistance Performance of Recycled Aggregate Concrete
Fuel Properties of a Two-Phase Biodiesel Emulsion
Coal Hybrid Heavy Aromatics Vehicle by Fuel of Experimental Research
The Influence of Thermal Exposure on the Microstructure Evolution of a Nickel-Base Single Crystal Superalloy
Effect of the Fibre Morphology and Aging Conditions on the Mechanical Properties of Hemp Fibers
Influence of Preparing Conditions on the Property of a New White-Light Long Afterglow Phosphor Sr₂SiO₄: Pr³⁺
Study on the Structure and Phase Transition of Sm Substituted BiFeO₃ Nanoparticles
Thermal Performance and Dehydration Kinetics of KAl(SO₄)₂•12H₂O as Phase Change Material
Preparation of Hexagonal Fe₃O₄ Nanometer Particles via Weakly Magnetic Field Assisted Oxidation Co-Precipitation
Properties of Nano-ZnO Films Deposited by RF Magnetron Sputtering for SAW Biosensors
Convenient Hydrothermal Synthesis of Zeolite a from Potassium-Extracted Residue of Potassium Feldspar
Preparation of Nano-Fibrous Poly(L-lactic acid) Scaffold with Hierarchical Pores
Behavior of Continuous FRP Rectangular Spirals as Shear Reinforcement for Concrete Beams
Study on the Nanoconfinement-Induced Breaking of Helical Symmetry in Metal Nanowires
Preparation of Three-Dimensional Ordered Macroporous Perovskite-Type LaFeO₃ Oxides
Preparation and Dielectric Properties of Dy-B-Si-O Glass-Doped Ba_0.6Sr_0.4TiO₃ Ceramics
Electrochromic Properties and Raman Spectroscopy Analysis of Tungsten Oxide Thin Film by RF Sputter
Probing Swelling and Shrinking Process of Polystyrene Film by In Situ Ellipsometry
Effect of Welding Residual Stress on Fatigue Performance of the Welded Joints Treated by Ultrasonic Peening
Synthesis of AlN Powders by Carbothermal Reduction-Nitridation Reaction of Nonhydrolytic Al₂O₃ Gels with CaF₂ Addition
Reduction Kinetics of Bayan Obo Coexisted Iron and Niobium Ore by Carbon-Bearing Pellet
Study on Microstructures and Mechanical Properties of AlSi9Cu3 Aluminum Alloy Fabricated by Liquid Forging
A Modified Coupling Method to Solve the Integrated Equations of Velocity and Temperature Fields in 3D FEM
Preparation and Ferroelectric Properties of Sol-Gel Derived (Ba_0.95Ca_0.05)TiO₃ Ceramics
Friction and Wear Behaviors of PTFE Composites Reinforced with Different Fillers
Unascertained Measurement Model for Water Safety Assessment
Adaptive Control Design for Hydrogen Production via Autothermal Reforming of Methanol
Study on Interfacial Tension and Flammability of Mg-Ca-Ce Alloy Melt
Removing of Si in the NaOH Molten Salt Reaction of Titanium Slag to Produce TiO₂
Coating of Ti64 Bearings in Air by Using a Q-Sw Laser
Morphologies and Crystal Phase Control of Calcium Carbonate Using “Crew-Cut” Micelles of Poly (styrene)-b-Poly (acrylic acid) as a Crystal Growth Modifier at Room Temperature
The Comparison of the Adsorption Performances of Phenol onto H103 Resin and XAD-4 Resin
Study on the Mechanical Properties and Frost Resistance of Recycled Concrete Prepared by Village Construction Wastes
A PMA-Based Collaborative Strategy for Reliability Design and Optimization of Multidisciplinary Systems
Synthesis of a Novel Donor Unit for D-A Type Polymers: 2,7-di(5-Bromothiophen-2-yl)-10-Hexadecyl-Phenoxazine
Study on Refining Technology for Reducing the Content of T[O] in Steel
Generation Characteristics of Polycyclic Aromatic Hydrocarbons during Blending Coal Coking
Preparation and Characterization of Multiwalled Carbon Nanotubes Deposited by Europium Hydroxide
Inhibited and Enhanced Spontaneous Emission Using Silicon-Based on Finite Thickness Photonic Crystal Waveguides
Evaluation of Relations among Basic Mechanical Properties of Concrete with Machine-Made Sand
Design for Optimal One-Dimensional Surface Profile of EVA on Solar Cell Modules
Corrosion Behavior and Mechanical Properties of Reinforcing Bar HRB400 in NaCl Solution
Influence of Nano-Serpentine on Tribological Behaviors and Wear Process of Hybrid PTFE/Kevlar Fabric Composites
Electrochemical Study on the Effect of Xanthine on Electrodeposition of Nanostructured Pt Thin Films and Pt(IV)-Xanthine Interaction
Fabrication of Unfired Porous Quartz Brick Used the River Sands from the Yangtze River in China
Study on the Properties of PVDF/LCP Blending Membranes
Review of Mix Proportion Design Methods for Fly Ash Concrete with Machine-Made Sand
Effect of Amorphous and Nanocrystalline Inoculant on Microstructure and Mechanical Properties of High Chromium Cast Iron
Study on the Stability of Insect Wax during Storage Period
Preparation and Properties of Thermo-Sensitive Molecularly Imprinted Hydrogels
Study on Rotary Object Recognition Technique from the Complex Background
Research on the Hydrothermal Processing of Mica-Titanium Pearlescent Pigment Precursor
Effect of Compression Ratio and Lay Angle of Metal Net on the Mechanical Properties of Metal Net-LVL Composite
Finite Element Simulation of Perfect Bonding for Single Fiber Pull-Out Test
Surface Topography of Vinyltriethoxysilane Films Deposited on the Silicon Dioxide Substrate (0001) Investigated by Atomic Force Microscopy
Continuous Cooling Transformation Behavior of Vercooling Austenite of Low Carbon-Manganese Steel
Study on Foam Properties of Alkylbenzene Sulfonate Gemini Surfactants
Research on the Confidence Interval of Indirect Detection
Effects of the Particle Size Variety of Metal Oxide on the Absorption Property of Long-Wavelength Infrared Laser
Preparation and Properties of Halogen-Free Flame Retardant Polyurethane Foams
Study on Dehydration Process of Wet Natural Rubber by Single Screw Dehydrator and Properties of Dry Natural Rubber
The Assembly Success Rate and the Estimation of Assembly Time for a Flexible Assembly System
Photocatalytic Activity of Bi₂O₃ Prepared by Different pH Value
Study on Influence of Modified SiC Nano-Powders on the Microstructures and Work-Hardening Properties of ZGMn13
Data-Conversion and Displaying for Numerical Simulation of EMCC with FEM-FVM-Joint Method
A Comparative Study of Monomers on the Preparation of Permselective Functional Packaging Materials
The Development and Performance Evaluation of Hydrophobic Association Polymer Pre-Cross Linked Particulate
The Impact of Reflux Ratio on Rectification Column Theoretical Plate Number
Reliability Study of CNC Machining Centers
Dyeing of Degummed Silk Fibers with Anthocyanins in Red Cabbage
Influence of Adding Different Poly (ethylene glycol) in the Biosynthesis of Bacterial Cellulose
An Experiment Study on Woven Fiber Reinforced Rubber Composite Armor against Shaped Charge Jet
The Preparation of Cu₂ZnSnSe₄ Films by Selenization of the Oxide Precursors
A Study on Microstructures and Creep Behaviors in the Mg-3Sr-xY Alloys
Finite Element Analysis of 5MW Fiberglass and Carbon Fiber Wind Turbine Blade
The Development and Performance Evaluation of Green Cross-Linked Movable Gel
Preparation and Characterization of Ni-Containing Aluminophosphate Molecular Sieves
The Effect of Reinforcement-Length of Carbon Fiber Reinforced Bonding Composites on Circular Tubes under Flexural Condition
The Effect of Uniaxial Stretching on the Crystallization Behaviors of Polylactic Acid Film
The Preparation and Characterization of Carbon Nanostructures Catalyst and its Catalytic Activity
The Pressure Gas Line Characteristic Curve Shape Based on Origin
Fabrication and Properties of the PVDF/PVDF-g-PMMA Blend Hydrophilic Membrane
Characterization of Five Natural Resins and Waxes by Differential Scanning Calorimetry (DSC)
A New Approach for Colloidal Crystal Fabrication with the Template of Reversible Stress Wrinkle
The Optimization Design of Laser Welded Sandwich Plate Structure
Effect of Si-SiC Additives on Properties of Tap Hole Clay
Theoretical Investigation of Energy Levels Splitting of CsCdBr₃:Pr³⁺ Crystal
Preparation of Highly Exfoliated Epoxy/Clay Nanocomposites by the Method of Ultrasonication Dispersion-Microwave Cure
Spatial Location of Zerovalent Iron Nanoparticles in Montmorillonite
Effect of Metal Intercalating on Transmission Characteristics of One-Dimensional Photonic Crystal
Synthesis, Electrical and Humidity Sensing Properties of BaTiO₃ Nanofibers via Electrospinning
Effect of In Situ Formed Mullite on Properties of High Alumina ULC Castables
Synthesis of Tung Oil Anhydride-Ester Polyol
Photolithography and Photochemical Reaction of Copolymer Containing Anthracene in Langmuir-Blodgett Films
Synthesis and Adsorption Properties of Crosslinked Starch Microspheres (CSM)
Indonesia Coal Explosive Characteristic of Pulverized Coal in Experiment
Preparation and Characterization of Aluminium-Doped SnS Thin Films
Condition Analysis of Nitrogen Remove from the Mixture of Municipal Wastewater and Fecal Sewage
Ferroelectric and Dielectric Properties of La₂O₃-Doped BaTiO₃ Ceramics
Comparative Study on Microstructure and Texture of Ti-IF Steel Sheets Produced by Different Hot Rolling Processing
Progress towards the Automatic Assembly of Carbon Nanotubes by Dielectrophoresis
Enhanced Optical Absorption in Modified One-Dimensional Metallic Photonic Bandgap Structures
Application of the Soil Nailing Wall on Foundation Engineering
Dislocation Generated by Electron Irradiation
Chapter 2: Surface Engineering/Coatings
The Characteristic of the Coating Prepared on Magnesium Alloy AZ91D by Micro-Arc Oxidization
Fast Electroless Ni-P Coating on AM60 Magnesium Alloy at Low Bath Temperature
Diagnosis of White Spot Defects Drived from Gear Wheel Carbonization and its Corresponding Measures
Simulation and Experimental Measurement of Ultrasonic Waves Propagation Velocity in Trabecular Bone
Primary Study on Electron Beam Surfi-Sculpt of Ti-6Al-4V
Reliability Laboratory Analysis of PCB Surface Coating Based on ENEPIG
Self-Protection of Flux-Cored Wire Surfacing is Applied to the Enhancement of Chute Lining Board
Fe-Based Amorphous/Nanocrystalline Coating on AZ91 Magnesium Alloy Substrate Deposited by Automatic High Velocity Arc Spraying
A Study on Brazing Process and Mechanical Properties of AZ31 Magnesium Alloy
Preparation and Characterization of Sm³⁺ Doped CBS Transparent Glass-Ceramics
Effect of Refractory᾽s Thermal Conductivity on the Thermal Stress Field of the COREX Gasifier Top
Characterization of Ceramic Coatings on ZL114 Aluminum Alloy Prepared in Alkaline Electrolyte Adding Nano-Al₂O₃ by Micro-Arc Oxidation
Optimization of Process Parameters for Electroless Ni-P Plating on AZ91D Magnesium Alloy by Phosphate Pretreatment
Applications on Nanocomposite Coating Technology in Plastic Injection Mould Cavity Surface Treatment
A Surface Melting Infiltration Study on Cast Magnesium Alloy
Mechanical Properties of ADC12-6061 Aluminium Alloy Joints Produced by Friction Stir Welding
Technical and Structure Study of Coprecipitation Method for Nano-Titanium Dioxide
Effect of Ce on Wear Behavior of Plasma Spray Welded Novel Aluminum Bronze Coatings
Study on Preparation and Performance of γ-Ray Protection Coating
An Improved Tool Path Model Including Gyroscopic Effect for Instantaneous Cutting Force Prediction in High-Speed Milling
Influence of Organic Sealed on the Corrosion Behaviors of Micro Arc Oxidation Coated ZM5 Magnesium Alloy
Numerical Study on Uniaxial Compression Test of Rock Specimen with Random Holes
Research on Surface Coating Technology of PCB Based on ENEPIG
Influences of Pulse Current Density on the Characteristics of Ni-W-P-CeO₂-SiO₂ Composite Coatings
Non-Abrasive Cryogenic Polishing Device on Cylindrical Surface Based on Recurdyn Dynamic Simulation
Optimization of Diamond-Coated Drawing Dies for Stainless Steel Tubes Based on the FEM Simulation
Molecular Dynamics Simulation of Au-TiO₂ Catalysts: Deposition of Gold Nanoclusters on Rutile (110) Surface
Self-Assembly of Large Scale and High-Quality Colloidal Particle Films by Spin-Coating
The Influence of D-SRRs’ Geometry Dimension on the Resonant Frequency in the LHMs
Effect of Slit Structure of Purging Plug on Stress Field
Investigation and Evaluation of the Safety Properties of Hardwood Athletic Floor System in China
Fracture Analysis of the Tearing NBR Aged at Different Temperature
Study on Surface Roughness Transformation during Metal Rolling
Hygrothermal Characterization of Porous Building Materials-New Research Method on Water Vapor Transmission
Study on the Preparation and Properties of Low Permeability Coating
Enhancing the Sinterability of Chemically-Derived Tl1212 Superconducting Powders Using Nano-Sized MgO as Sintering Aid
Study on Oil-Ash Corrosion and Coal-Ash Corrosion Occurred in the Flue-Gas Side of Fossil Power Plant
Comparison of Lu₃Al₅O₁₂:Ce and LaBr₃:Ce Scintillators in Gamma-Ray Spectrometry
Research on Bonding Technology Match of ENEPIG PCB of Digital Microphone
SHS-TiC Particle Reinforced Hardface Coating Prepared by Vacuum Cladding Process
Effect of Process Parameters on Deposition Rate of Electroless Ni-P Plating on AZ91D Magnesium Alloy
Failure Analysis on the Exhaust Steel Tube Explosion of Natural Gas Compressor
Hygrothermal Characterization of Porous Building Materials-Experiment Research on Isothermal Sorption and Capillary Problem
Study on Surface Modification of Pure Magnesium and Magnesium Alloy with High Current Pulsed Electron Beam
Study on the Heat-Oil Resistance Capacity of Surface Chemically Modified Nitrile Rubber
Surface Topology Optimization of Air Bearing Slider for Wear Durability in Magnetic Hard Disk Drives
Mixture Experiments Design Including Interactions with Process Variables for Applications in Paint Preparation
The Influence of Argon Flow on Inclusion Characteristic and Fatigue Life of Continuous Casting Bearing Steels
Inhibition Effect of Compound Boricacidester on the Tungsten Carbide Leaching of the Cemented Carbide Tool
Research and Evaluation on the Planning and Sanding Properties of Mytilaria laosensis
Analysis of Flue-Gas Side Abrasion in Thermal Power Plant Boiler
Fatigue Analysis of the Drill String According to Multiaxial Stress
Effect of Refractory᾽s Thermal Expansion Coefficient on the Stress Field of the Top of Gasifier
The Analysis of Nitrogen Removal Performance for Eco-Ceramic Concrete Biofilm Reactors
Mechanism Analysis and Experiment Study on RC Composite Core Walls
The Morphology Evolution of Vapour Phase Aluminide Coating on a CMSX4 Single Crystal Superalloy
Idealisation and Formulation in Structural Dynamics Using Modal Analysis
Impact of Shaft Coaxiality on the Local Stiffness of Angular Contact Ball Bearing
Thickness Distribution Model of Condensate on Rotary Substrate by EB-PVD
Deformation and Heat Transfer Analysis for High Speed Dieless Drawing of AZ31 Magnesium Alloy Tubes
Inhomogeneous 3D Finite Element Model for Prediction of Free Surface Roughening
Electrical and Flexural Properties of Copper and Graphite Filled Phenolic Resin Composites
Research on the Counterweight in the Process of Diamond Wire Saw Cutting Polysilicon
Study on the Dielectric Properties of CaCu₃Ti₄O₁₂ Ceramics by the Brickwork Layer Model
A Dynamic Dispatching Method of Resource in Cloud Computing Environment
The Simulation Study on the Rules of Spatial and Temporal Changes of Total Nitrogen in Semi-Aerobic Landfill Leachate in the Laboratory
The Effect of Bonding Length on the Flexural Performance of Carbon Fiber Epoxy Matrix Composite Tubes
Microwave Devulcanization of Waste Rubber with Inorganic Salts and Nitric Acid
Effect of Hydrogen Charging on Microstructure Morphology of Warm Rolled Low Carbon Steel
Chapter 3: Materials Forming, Machining and Joining
Numerical Analysis for the Bending Process of Profile with Stiffener
Study on the Static Recrystallization of E36 Ship Plate with Continuous Hot Rolling Process
Study on Mechanical Behaviors in Friction Stir Welding of 6061-T4 T-Joints
Electrochemical Behavior of Corrosion Resistance Alloys
A Welding Gun Height Detection Method in Compulsively Short Circuiting Transfer Mode of Rotational Arc GMAW
Experimental Analysis of Residual Stresses in Cold Formed Truck Frame Side Rail Structures
The Effect of Modification and Heat Treatment on Low Chromium White Cast Iron
Development of a Combined Shape and Gauge Control Scheme Based on Function Φ
Characterization of Bolt Hole Residual Stresses for Assessing Structural Behavior of Truck Frame Rails
High Efficiency Precision Surface Grinding of Fused Silica
Measurement of Dynamic Resistance in Resistance Microwelding of Insulated Copper Wire
Experimental Investigation on High-Speed Milling of Aluminum Alloys
Chip Prediction in Finite Element Modeling of the Chip Formation Process during Cutting Ti-6Al-4V Alloy
Investigation of Temperature Distribution in High-Speed End Mill Assisted by Heat Pipe Cooling
Mechanics of Design and Model Development of CVC-Plus Roll Curve
Study on Combined Process of Micro-EDM and Electrorheological Fluid-Assisted Polishing
Effect of Ni-Coated Carbon Nanotubes on the Corrosion Behavior of Sn-Ag-Cu Solders
Impact of Heat-Treated Microstructure on Milling Performance of Ti-6Al-4V Alloy
Droplet Tracking in Double-Electrode GMAW
Effect of Heat Input on Structure and Mechanical Properties of Low Matched Welded Joint in a 1000MPa Grade Steel
The Research on the Algorithm of Rubber Parts Forming Die Dimension Based on Mid-Difference Value Method
Numerical Simulation of Fiber Orientation of Short Fiber Reinforced Polypropylene in Injection Molding
Characteristic Analysis of Grinding Point Movement in Grinding Aspheric with Arc Envelope Grinding Method
Evaluation of Welding Residual Stress Based on Temper Bead Welding Technique
The Effect of Preheating Temperature on the Microstructure and Properties of Copper by the Liquid Die Forging Technology
Parametric Design of the Fish-Tail Die Channel Based on SolidWorks
Microstructure Evolution and Numerical Simulation of DP Steel TWBs During Warm Tensile Deformation
Experimental Investigation of Surface Roughness in High Speed Turning of Hardened AISI P20 Steel
Research on Roll Force for Variable Gauge Rolling
Prediction and Investigation of Surface Quality in High Speed End-Milling of Silicon to Eliminate Conventional Finishing Operations
Effect of Brazing Temperature and Clearance on Microstructure and Mechanical Properties of 316L Stainless Steel Brazed Joints
Exploration on Continuous Extrusion Process Originate from Friction for Polymer
The Dimension Accuracy Analysis of Multi-Wire Flat Rolling Process
Strain Hardening Analysis Coupled to Remeshing Procedure Application to Sheet Hydroforming Processes
Effect of Temperature on Shear Strength of Adhesively Bonded Joints for Automobile Industry
The Research of Characteristic Agent Used in Cold Bending Centre Sill
Research of Die Cavity Warm Extrusion on 3Cr2W8V Steel One-Off Forming Technology
Constitutive Equation of ZL201 Alloy during the Semi-Solid Thixotropic Compression
Mechanical Properties of Aluminium-Alumina Welding by Friction Welding
Multi-Cutting Passes for a Fine-Cut Wire Electro Discharge Machining of Stainless Steel
Experimental Investigation and Analytical Calculation of the Bending Force for Air Bending of Structured Sheet Metals
The Production of Poly(L-lactic acid) from 2-Steps Direct Polycondensation in 100 Kg Scale
Experimental Investigations of the Machinability of Titanium Alloy TC4 with Different Hydrogen Contents
Vibration Analysis of Single Lap Adhesive Joint with Non-Uniform Adhesive Thickness: Experimental and Analytical Investigation
Effect of Cooling Rate on Microstructure of Simulated CGHAZ for Modified High-Cr Ferritic Heat-Resistant Steel
Study on Deformation Coordination in Upsetting Forging Process of the Crank of Continuous Fiber Crankshaft for Marine
Large Scale Molecular Dynamics Simulation of Femtosecond Laser Ablation of Silicon Using Sensing-VISICOM
Study on Parameters Optimization of Ceramic Machining Process
Techanics Study on PcBN Cutting Tool Dry Turning Chilled Cast Iron
The Mixing Condition and Mechanical Property of Friction Stir Welded Dissimilar Formed 3003 and 6061 Al Alloys
Development of Experimental Devices for Tube Hydro-Forming
Experimental Study of Vibratory Turning with Low Frequency of the Mechanical Vibration Device and on the Surface Texture
Optimization of Parameters and Research on Joint Microstructure of Resistance Spot Welding of 201 Stainless Steel
The Influence of N Values on Sheet Metal Deep Drawing Based on Different Blank Holder Forces
Corrosion Behavior of 6082-T6 Al Joint Welded with Twin Wire MIG
A Novel Material Preparation of Density Ceramics and Fibre Joining
An Automatic Control System Based on Arc Voltage of TIG Welding
PZT Thin Films from Bulk PZT for Vibration Power Harvester Applications
Gas Forming a V-Shape Aluminum Sheet into a Trough with Contour Like the Back of a Twin-Hump-Camel
Electrochemical Behavior of Welded Joints with 308L Stainless Welding Wire and Low Temperature Transformation Welding Wire
Effect of Metal Inert Gas Welding on Microstructure and Mechanical Properties of Al-Zn-Mg Alloy
Principle of the Continuous Variable Cross-Section Recycled Extrusion (CVCE) Process
Study of Combined Process in Micro-EDM
Investigation on Formability of AISI 304 Circular Cups by Warm Deep Drawing
Impact of Cutting Tool Geometric Parameters on Milling Titanium Alloy TC4
Effect of Current on the Interfacial Structures of the Dissimilar Metals Diffusion Bonding
Surface Roughness Prediction in Ball-End Milling Process for Aluminum by Using Air Blow Cutting
Static Recrystallization and Precipitation Behaviors of Weathering Steel for Bridges
Elastic Deformation Predicting Design and Numerical Simulation for an Asymmetry Multi-Mandrel Aluminum Extrusion Die
Preparation and Properties of UV-Curable Adhesives Based on Epoxy Acrylate Prepolymers
Optimization on Resistance Microwelding Procedure of Fine Copper Wire Based on Orthogonal Experiment Design
Mechanical and Electrical Properties of Graphite/Carbon Fiber/Phenolic Resin Composite
Numerical Simulation of Thixo-Diecasting Al6061 Alloy Automobile Part
The Failure Mechanism of Cemented Carbide Milling Insert during Machining Difficult-to-Cut Metal
BP Neural Network Model for Seam Tracking Offset during High-Power Fiber Laser Welding
Hot Forming Behavior and Flow Stress Model of Steel 50A1300
A New Algorithm for Solving the Best-Fit Sphere of Optical Aspherical Surface
Design, Development & Experimental Investigation of Electro-Discharge Diamond Surface Grinding of Ti-6Al-4V
Development of Tooling Cost Model for High Speed Hard Turning
FEM Prediction of Welding Residual Stresses and Temperature Fields in Butt and T-Welded Joints
Effect of Temperature on Microstructure and Mechanical Properties of 316L Stainless Steel Brazed Joints
Effects of Thickness Ratio on Interface Characteristic and Mechanical Properties of Ti/C Laminated Composites
Machining a Micro-Scale Structure Using an in-House Developed Miniature Machine Tool
Effects of pH on the Growth of ZnO Nanorod Arrays in Aqueous Solution
Study on Dynamic Mechanical Properties of n-HA/PA66 Composites
Method of Analyzing the Size of Voids Beneath Rigid Pavement Slabs
Microstructure and Mechanical Properties of Friction Stir Welding Joint of Pure Copper
Chapter 4: Laser Processing
Process Optimization and Properties of Laser Cladding High Speed Steel Coatings on Nodular Cast Iron
Ni₃Al-Base Alloy of Laser Welding Behavior Research
Effect of Scanning Path on the Thermal Stress of Titanium Alloy in the Laser Cladding
Passive Laser Assisted Bending of Ultra-High Strength Steels
Study on the Straight Edge Diffraction Effects of Base Model Gaussian Laser Field
Landslide Risk Assessment Expert System Along the Oil and Gas Pipeline Routes
Effects of Hot Extrusion Processes on Grain Size of ZK60 Alloy Tubes
Epitaxial Growth of Ni-Based Superalloys Using Laser and Spark Deposition
Study and Design of Human-Machine Interface System for Embedded CNC Precision Internal Grinder
Chapter 5: Powder Metallurgy and Plastic Deformation
Magnetic Abrasive Finishing – A Review
Mn_xZn_1-xO Crystal Synthesized by Hydrothermal Method
Strain Analysis of NC Incremental Sheet Metal Forming
Purification of Metallurgical Grade Silicon by Slag and Acid Leaching Treatment
Effect of Heating Temperature on the Microstructural Evolution of Al-5.8%Zn-1.63%Mg-2.22%Cu-0.12%Zr Gas Atomized Powders
Chapter 6: Friction and Wear
Effects of Annealing Technique on the Microstructure and Mechanical Properties of AZ31B Magnesium Alloy Sheets
Theoretical Investigation on Prestress during the Manufactural Process of Integrated Multilayer Wrapped Pressure Vessel
Investigation of Crack Initiation and Propagation during Rolling Contact Fatigue of SUJ2 Steel Bearings Using a Newly Developed One-Point Testing Machine
Influence of Vibration on the Heat Transfer of Lost Foam Casting Filling
Simulation to Static Recrystallization of Nb Micro Alloyed Steel by Cellular Automaton
Wear Resistance Improvement of Titanium Bearings by Laser Gas Nitriding
Study on Ultra Fast Cooling Technology in Hot Strip Mill
Numerical Simulation on Electron Beam Welding Temperature Field of Al-Li Alloy
Evaluation of Non-Uniform Deformation of Multi-Layered Ceramic Sheets with Printed Electrodes during Compression
Chapter 7: Waste-to-Energy, Waste Management and Waste Disposal
Treatments of Magnesium Slag to Recycle Waste from Pidgeon Process
The Feasibility Analysis of Ice Making System Driven by Liquid Nitrogen Engines and Heat Source is Diesel Exhaust
Wax Formation Study by the Pyrolysis of High Density Polyethylene
Non-hydrogen Catalytic Dewaxing for Oil Production
Relating Analysis of Multi-Parameters of Constructed Wetland
Influence of Refractory᾽s Poisson’s Ratio on the Stress Field of COREX Gasifier Top
Ultrasonic Characteristics of the Ultrasonic Grinding Process about the Nano-Ceramic Plate
Exact Traveling Wave Solutions to a Model for Solid-Solid Phase Transitions Driven by Configurational Forces
Analysis of Heat Transfer and Straightening of Continuous Casting Slab Using 3D Finite Element Method
Chapter 8: CAD/CAE/CAM
Application of Machine Vision in Grading and Identification of Grafting Seedlings
An Approach to Analyze Pose Accuracy of Master Slave Surgical Robot with Matlab
Comparison of Three Hydraulic Unloading Schemes for a Screw Press
Semi-Continuous Extraction of Agarwood Oil with Subcritical Water: Optimization of Plug Flow by Response Surface Methodology
Experimental Study of Light Intensity on I-V Characteristic of Single Crystalline Silicon Solar Cell
Micro-Machined Variable RF Capacitor Based on Glass Substrate
Fractal Study on Blank Residue of Mould Cavity
Classification of Fresh N36 Pineapple Crop Using Image Processing Technique
Finite Element Analysis of Axial Stiffness of Extruded Sealing Ring Used in Aviation Engine
Vibration Modal Analysis of Involve Gear with Asymmetric Tooth Profile and Double Pressure Angles
Neodymium-Iron Garnet Crystallite and its Magnetism Prepared by a Hydrothermal Method
Design of Temperature Control System Based on Fuzzy PID
Development and Application of YS Silver Catalysts for Ethylene Epoxidation
Hardness and Impact Toughness of Niobium Alloyed Austempered Ductile Iron
Experimental Study on Improved Phase-Shift Control Soft-Switching Converter
Kinematics Analysis and Precision Design for a 2-DOF Spatial Mechanism
Numerical Study on Ventilated Supercavitation Reaction to Gas Supply Rate
Analysis and Simulation of Strong Earthquake Ground Motions Using ARMA Models
Stress Analysis and Life Estimation of Staged Prestressed Combined Cavity Die
Pressure Pulsation System in Electro-Hydraulic Control Valve of Engineering Mechanical
New Method for Measuring Liquid Level in WFGD System
Microstructure and Properties of Roller Surface Alloyed by Laser
Supply Chain Quality Information Management Methodology and Application System Research
Dynamic Analysis of Motorcycle Engine Rod Bending and Fracture Failure
Simulation and Application of Fuzzy Control System with Integrator
Research on Thermal Analysis of Pillow Spindle System with Multi Axes Rotary Spindle Head
Application of Desulfurization Additive in Desulphurization System for 600MW Units
The Measurement Method to Position Coordinates of Movable Platform for 3-TPT Parallel Machine Tool
Study on Automobile Engine Vibration Test Based on LabView Software
Investigation of Ion Transport and its Effect on the Photovoltaic Performance in the Quasi-Solid State Dye-Sensitized Solar Cells
Machining Process Analysis and Parametric Programming of Parts with Complex Surfaces
Research on Porous Sprayer for Refining of Aluminium Melt
Humidity Sensing Property of Mesoporous Indium Oxide
Responses and Optimization of a PID-Based Speed Regulating System of the Planetary Mixer
Conductivity Studies on Li_1-XAl_xTi_2-X(PO₄)₃ (X=0.0-0.5) Due to the Addition of Al³⁺ Trivalent Cation
Effect of Vortex Generators on Aerodynamic Characteristics of a Car
Research of Inspection System Based on Machine Vision for Steel Rod Surface Defects
Status and Development of the Flexible Manufacture Technique with Direct Spinning of the Polyester Textile Fibers in China
Suppression of Chatter Vibration by Fuzzy Sliding Mode Control in Machining Processes
The Research of CAD System in Three-Plate Parallel Indexing Cam Mechanism
Machinability Evaluation of Difficult-to-Cut Materials Based on Variable Processing Cost per Unit Material
The Modeling Study of Active Power Filter Based on Adaptive Notch Filter
Fabrication of Metal Micro Needle Array by LIGA Process
Interval Granules in Incomplete Information Systems
A Case-Based Reasoning Combined with AHP Wighting for Cutter Conceptual Configuration Prediction Model
A Inductive Accelerator Based on UV Lithography of SU-8
Experimental Research on TC4 Alloy by Laser Shock Processing
Effect of Axial Pressure and Tool Rotation Speed on Temperature Distribution during Dissimilar Friction Stir Welding
Design and Optimization of Expert Database System for Cast and Roll Production of Copper Tubes
Design Research on Feeding Paper Machine of Printing Press
Study on the Shape of Occurrence and Developing of Evaporation Wave in Short Pipe
Analysis of Aperture Phase Errors Using Interval Method
Research of Collision Probability and Teaching Platform for Wireless Network Transmission Interference Analysis
Drainpipe Network Management Information System Design Based on GIS and DSS
Study on Shaped New Technology of Tractor Clutch Gears
Automatic Matching Based on Dynamic Threshold in Close-Range Photogrammetry
Study of Backwashing Process for Ceramic Micro-Filtration Membranes Used in Pretreatment of DMF Wastewater
Virtual Assembly of Product and Assembly Procedure Planning Based on Morphological Analysis by Matrix
Research on Boom-Type Roadheader Vibration Testing Based on the LabVIEW
Research on Opening and Closing Process for Outdoor Vacuum Circuit Breaker Contacts
The Development of Breakout Prevention System by Logical Judgement
Surrounding Rock Stress and Deformation Evolution Character Analysis of Circular Openings in Deep Underground Engineering
Research Analysis and Experiment Study on Flow Field of Hydrodynamic Coupling
Impact of JIT and TQM Strategies on Searching for Health Information and Ensuring Service Quality in Hospitals
Ergonomic Analysis of the Master of Minimally Invasive Surgical Robot
Influence of Different Pore-Forming Mechanism on Superfinish Grinding Tools
Change Detection of Coastal Landscape Pattern Using GIS: a Case Study of Tianjin Binhai New Area
A Combined Modeling Method Based on Multiple-Sensor Integrated Measuring System for Reverse Engineering
Influence of Thermal Behavior of Spindle on Machining Accuracy in Micro-Endmilling
Simulation on Anode Electric Field Intensity about Electrochemical Jet Machining
Structural Analysis of Mechanism with Compound Hinges in Ordinal Single Opened Chain Theory
Analysis and Optimization of the Static and Dynamic Characteristics of Head Frame
The Effect of Helical Gear Parameters on the Meshing Noise
Parameters Optimization and Theoretical Analysis on Duckbill-Type Device for Sugar Beet Paper Pot Seedling Transplanting
Optimization Design of Kinematics Performance of High-Speed Spatial Parallel Coordinate Measuring Machine
Study on Narrow-Gauge Traction Locomotive Control System
Review on Construction Method of Subway Station
Development of Nanomaterials Electrochemical Biosensor and its Applications
Study on Dynamic Simulation Technology of Polar Coordinates Wafer-Handling Robot
Research on Steel Cord Belt Electromagnetic Testing Real Time Monitoring Technology
Influencing Factors on Dynamic Response of Hydrostatic Guideways
Body Fitted Grids Based FVM Simulation of Aluminum Extrusion Process
Modeling and Simulation of Electromechanical Coupling Dynamics for Permanent Magnet Synchronous AC Servomotor
Coupling Control and Analytical Model of the Shaker on a Centrifuge
Annual Runoff Prediction Based on Least Square Support Vector Machines-Markov Chain Combined Model
Composite Measurement Method Based on Computer Vision Technology
Cost Modeling and Simulation for Mining Mechanical Equipment Undergoing Maintenance
Research Advance of Electrochemical Sensor Fabricated with Nanomaterials and their Application
Fluiding Characteristics of Pulverized Coal in Fluidization & Injection Jar
The Primary Processing of MEMS Devices and Applications Analysis
Study on Cavitation Mechanism of Pulse Electrochemical Compound Machining
The Learning Styles of Taiwanese Mechanical Engineering Students
Research on Micro Electrical Discharge Milling Technology of Miniature Thin-Walled Impeller
Abrasive Jet Polishing of Micro Groove Using Compound SiC Abrasives with Compound Additives
Chapter 9: Product Design and Development
Design of Active Phased Array Antenna in Wind Profiling Radar
The Creative Design of Injector Clamping Mechanism
Digital Jacquard Fabric Design with Visual Illusion Effect Based on Half-Backed Structure
An Incremental Innovation Design Process Model Based on TRIZ
Reliability Assurance Measures of CNC System Software
Controlled Release of Tablets Containing Poorly Water Soluble Model Drug Coated with Kollicoat MAE 30DP
Function Modeling, Solving and Simulation Based on Effect in TRIZ
Modal Analysis of the Hydraulic Retarder Shell
Hedonic Price Analysis on Mobile Phone Market
Modular Decomposition of Flow Chart Path Method and its Application
Innovative Design of a New Differential Brake
Design Principle and Method of Visual 2.5D Effect Black-and-White Digital Jacquard Fabric
Application Research of SWOT Analysis in Enterprise Patent Portfolio Strategy
Design of Injection Mould for Back Shell of Radio
Increasing Solubility of Poorly Water Soluble Drug Resveratrol by Surfactants and Cyclodextrins
Design and Development of Non-Ironing Fabric of Cotton/Fractal Polyester Twisted Yarn
Chapter 10: Other Related Topics
Research on Kraft Pulping Delignification of Bamboo (Neosinocalamus)
Study on Application of Characteristics of the Decorating Material in the Interior Space Design
Bifunctional Pt-Molecular Sieve Catalysts for Hydroisomerization of Long-Chain Olefins
Study of Test Site Construction for Passenger Car Working in Low Temperature
Impregnation of Ru(cod)(tmhd)₂ into PDMS Film in Supercritical Carbon Dioxide
Effect of Voltage Pattern on Intensity of Electromagnetic Emission during Electric Flame-Off Process of Ball Bonding Machine
Performance Test Specification for Passenger Car in Low Temperature
Color Prediction for Weft-All-Coloring Jacquard Fabric Based on the Two-Constant Kubelka-Munk Theory
The Research of the Equipment Manufacturing Industry Development Strategy of Fuxin
Contributions of Microorganisms to Nitrogen Cycle of Wuyiling Wetland in Yichun in Northeast China
The Study of Power Unit of a Wind-Magnetic Water Heater
Effect of Chlorination Conditions on Amount of THMs
Ecological Safety Analysis and Statistics Measures of Wuyiling Wetland in Yichun in Northeast China
Enzymatic Degradation of Polyester-Nanoparticles by Lipases and Adsorption of Lipases on the Polyester-Nanoparticles
Study of Fire Control Safety of High-Rise Building and Countermeasures

Les mer

Produktdetaljer

ISBN

9783037853269

Publisert

2012-02-23

Utgiver

Trans Tech Publications Ltd; Trans Tech Publications Ltd

Vekt

4600 gr

Høyde

240 mm

Bredde

170 mm

Dybde

126 mm

Aldersnivå

P, 06

Språk

Product language

Engelsk

Format

Product format

Heftet

Antall sider

2520

Redaktør

Liu Xianghua

Jiang, Zheng Yi

Han, Jing Tao

Materials Processing Technology, ICAMMP2011

Produktdetaljer

Materials Processing Technology, ICAMMP2011

Relaterte produkter

Produktdetaljer

Relaterte produkter