Materials Performance, Modeling and Simulation
Heftet /
2013
/ Engelsk
Produktdetaljer
ISBN
9783037856093
Publisert
2013-04-25
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1400 gr
Høyde
240 mm
Bredde
170 mm
Dybde
36 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
712
The collection of peer reviewed papers C-MRS 2012 meeting includes 102 papers selected from Symposium P: Advanced processing of materials, Symposium V: Materials modeling and simulation, and Symposium W: Materials surface and interface.
Les mer
Selected, peer reviewed papers from the Chinese Materials Congress 2012 (CMC 2012), July 13-18, 2012, Taiyuan, China
- Preface and Organizers
- Advanced Processing of Materials
- Effect of Strontium and T6 Heat Treatment on Structure and Performance of Al-11.6Si-0.5Mg Alloy
- Microstructure and Precipitates of High-Pure Ferritic Stainless Steels Stabilized by Niobium and Titanium
- Experimental and Numerical Study on Dieless Bending of 2-Piece Parallel Flow Microchannel Heat Exchanger
- Preparation of Tungsten-Copper Composite Powder by Electroless Plating
- Effect of Coil Temperature on Microstructure and Texture Evolution of an High Strength Nb-IF Steel Sheet
- Analysis of Density and Mechanical Properties of Iron Powder with Upper Relaxation Assist through High Velocity Compaction
- Effect of Addition Zr on As-Homogenization Microstructures of 5182 Aluminum Alloy
- Research on Characteristics of Heat Treatment of Squeeze Cast Al-Cu-Mg Alloy
- Effects of SPS Pulse Current on Interface of Al90Mn9Ce1/ZrO2 Micro-Cellular Structure Composites
- Effect of Process Parameters on Hydroforming of Stainless Steel Tubular Components with Rectangular Section
- Effect of Annular Electromagnetic Stirring on Microstructure and Mechanical Property of 7075 Aluminium Alloy
- Research on Dieless Drawing Process of Stainless Steel Tapered Tube
- Hot Deformation Behavior of A390 Hypereutectic Al-Si Alloy
- Numerical Simulation of Electro-Slag Remelting Process Solidification Structure of Cr-Co-Mo-Ni Bearing Steel
- Influence of Extrusion Temperature on Microstructures and Properties of Cu-17Ni-3Al-X Alloy
- The Effects of Rolling Process on the Microstructure and Properties of Columnar-Grained Cu-12 Wt%Al Alloys
- Influence of Different Pouring Temperature to Properties and Organization of A356 Aluminum Alloy under Specified Conditions
- Numerical Simulation Analysis of Aluminium Alloy Wheels Casting Defects and Casting Process Optimization
- Effect of Compound Fluxes on A-TIG Welding Joint Depth of Cu-Cr-Zr Alloy
- Fabrication and Properties of Cu/MgB2 Composites by Vacuum Sintering
- Research Progress of Cold Working Die Steel
- Effect of High Density Pulsing Current on Mechanical Properties of Fe-6.5wt.%Si Alloy Sheet
- Effect of Mixing Method on Microstructure of SiCp/Al Composites
- The Intelligent Control Method of the Density of the Metal Injection Molding Billet Based on ANN
- Study on the Interface Diffusion Bonding of the Copper Alloy/30CrMnSi Steel
- Effects of TIG Process on Corrosion Resistance of 321 Stainless Steel Welding Joint
- Microstructures and Mechanical Properties of Mg Alloy FSW Joint Characterized with Asymmetric Gradient in Three Dimension
- Cryogenic Treatment of 06Cr19Ni10 Austenitic Stainless Steel
- Magnetic Properties and Morphology of the Cobalt Particles Prepared in Different Liquid Solvent
- Effects of In/Ce to Sn-3.5Ag Lead-Free Solder on Microstructures and Properties
- Preparation and Mechanism of Cu/Nano-TiO2/PBO Composite Fibers by Photocatalysis Electroless Plating
- The Study on the Reducing Friction and Anti-Wear Performance of Zinc Phosphate Nanoparticles as Lubrication Additives
- Fabrication of Lotus-Type Porous Silicon by Unidirectional Solidification in Pressurized Hydrogen Atmosphere
- The Microstructural Evolution of AA6111 Aluminum Alloy during Homogenization Treatment
- The Surface Heat Transfer Coefficient Model of 7075 Al-Alloy Extrusion Product and its Temperature Prediction
- Isothermal Bainite Transformation in Aluminium Bearing TRIP Steel
- Effect of Cooling Paths on Microstructure and Mechanical Properties of Vanadium Bearing Microalloyed Steel
- The Influence of Inhomogeneous Deformation on the Microstructures and Properties of Thick-Plate 7150 Alloy
- Thermal and Optical Properties of High Refractive Index xNb2O5-(1-x)La2O3 Glasses Prepared by Aerodynamic Levitation Method
- Effect of Heating Temperature and Heating Rate on Austenite in the Heating Process of 300M Steel
- The Metal Flowing Behaviors and Die Bearing Band Optimization of a Large Al-Alloy Extrusion Profile
- The Dynamic Recrystallization Model of 7050 Al-Alloy during Hot Deformation
- Effect of Heat Treatment on Microstructure and Properties of Cu-3Ti-1Al Alloy
- Effect of Q-P-T Process on the Microstructure and Mechanical Properties of 300M Steel
- The Precipitation and Strengthening Mechanism of Cu-Ni-Si-Co Alloy
- Energy Saving by Applying 3000kVA Electric Arc Furnace in Fused Magnesia Production
- Effect of Partitioning Time on the Microstructure and Mechanical Properties of Q&P Steels
- Effect of Different Concentrations of Sodium Silicate Impregnated on the Performance of Carbon/Copper Composites
- W-Ti Alloy Prepared by Hydrogen Reduction of Nanometer WO3-TiH2 Powders
- Investigation on the Preparation and Properties of MoCu Gradient Material
- Grain Evolution Character of Discal Parts by Roll Forming
- Influence of Sulfur and Manganese Contents on Texture and Fish-Scale Resistance of DC03EK Cold-Rolled Enamel Steel
- Microstructure and Mechanical Properties of AZ81 Magnesium Alloy after Unequal Channel Angular Pressing
- Microstructure Evolution in Undercooled Ni-Si Melt
- Effect of Technological Parameters on Preparation of Mg-Based Foam Materials
- Influences of High-Temperature Short-Time Endurance Performance of Heat Resistant Steel for Ultra Supercritical Units
- Preparation and Heat Treatment of Ni60-WC/Cr12MoV Bimetallic Composite Materials
- Tungsten-Copper Composite Fabricated by Hot-Shock Consolidation
- Investigation of Deibinding and Sintering of 3Y-ZrO2 Gear Fabricated by Micro Powder Injection Molding
- Softening Mechanism in Heat Affected Zone of 2519 High Strength Al-Cu Alloy
- Research on Preparation Technology of High Quality Diamond Film
- Effects of Strain Rate on Tensile Deformation Behavior of Quenching and Partitioning Steel
- Effect of Composite Master Alloy on Mechanical Properties and Electrochemical Corrosion of ZL101 Alloy
- Heat Transfer Performance of Lotus-Type Porous Copper Micro-Channel Heat Sink
- Effect of Alterative and Homogenization on the Microstructure of Cu-20Ni-5Sn Alloy
- Properties and Fabrication of Alumina Dispersion Strengthened Copper Alloy with High Softening Temperature
- Materials Modeling and Simulation
- Magnetic Properties for Magnetic Quantum Dot Arrays: Fast Fourier Transformation and Micromagnetism Study
- Analysis and Simulation of the UOE Pipe Production Processing by Finite Element Method
- The Kinetics of Reorientation of Multi-Variants under the Continuous Tensile Stress: Phase-Field Simulation
- The Probabilistic Safety Assessment of the Rail Mounted Gantry Cranes
- Size Dependent Mechanical Properties of Graphene Nanoribbons: Molecular Dynamics Simulation
- The Effect of the Size and Electronic Factor on Occupation and Magnetic Property of Co Addition in L10 FePt Alloy
- First-Principles Study on the Thermodynamic Properties of Nb, Cr2Nb and Nb5Si3 Alloys
- Research on the out of Square of H-Beams
- Atomic Modeling and Simulation of AlCoCrCuFeNi Multi-Principal-Element Alloy
- Influence of Deformation and Quenching Temperature on Structures and Properties of High Nitrogen Stainless Bearing Steel
- Precipitate Behavior and Microstructure Evolution of γ’ Phase in Ni-Al Alloys with the Internal Elastic Strain
- Research on Flow Behavior of Advanced High Strength Steel at Elevated Temperature
- Simulation and Technology Optimization for Rolling Web Wave of Large Size H-Beam
- Indenter Size Effect on the Incipient Plasticity of Al (001) Surface
- Prediction and Simulation of Microstructure-Property and Residual Stress for Large Size Hot Rolled H-Beam
- Theoretical Calculation of Electronic Structure and Mechanical Properties of Quenched Carbon Structural Steel
- Computational Modeling of Sand Cementation by Bio-Mineral CaCO3
- Generating 2D Non-Equiaxed Initial Microstructure for Monte Carlo Simulation Using Modified Voronoi Model
- A New High Order Mathematical Model for Calculating the Energy Conservation Equation
- Optical Properties of Heterodiamond BC3 from First-Principles
- Numrical Simulation on Electric Field of Galvanic Corrosion for U-Nb Alloy and 45-Steel
- Effects of N Concentration on Electronic Structure and Optical Absorption Properties of N-Doped SrTiO3 from First Principles
- The Clustering of Zn6Y9 and its Predominant Role in Long Period Stacking Order Phases in Mg-Zn-Y Alloys: A First-Principles Study
- Development of Thermodynamic Database of Ti-V-Based Hydrogen Storage Alloys
- Materials Surface and Interface
- Effects of La2O3 on Microstructure and Properties of Laser Clad Fe-Based Amorphous Composite Coatings
- Interfacial Behavior of Micro-Cellular Structural Al90Mn9Ce1/TiO2 Composite Prepared by Spark Plasma Sintering
- Wear-Resistant Coatings Prepared by Combination of SHS and Lost Foam Casting
- Formation Sequence of Interface Intermetallic Phases of Cold Rolling Cu/Al Clad Metal Sheet in Annealing Process
- Galvanic Corrosion between Depleted Uranium and 45 Steel
- Surface Stability of a Biaxially Pre-Tensioned Soft Elastic Film Interacting with a Contactor
- Preparation of 8YSZ and Double-Ceramic-Layer La2Zr2O7/8YSZ Thermal Barrier Coatings on GH4169 Superalloy Substrates and their Static High Temperature Oxidation Behaviour
- Study on the Electrolysis Expansion of Carbon Cathode in [K3AlF6/Na3AlF6]-AlF3-Al2O3 Low Temperature Melts
- Effect of Deposition Temperature on the Structure and Mechanical Properties of Ti-6Al-4V Film
- The Effect of Strain on the Impedance and Surface Potential of Austenite in 304 Stainless Steels
- Preparation and Characterization of the Highly Regular Nitrogen Doped Anatase TiO2 Nanotube
- Impact on Solidification Dendrite Growth by Interfacial Atomic Motion Time with Phase Field Method
Les mer
Produktdetaljer
ISBN
9783037856093
Publisert
2013-04-25
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1400 gr
Høyde
240 mm
Bredde
170 mm
Dybde
36 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
712