Materials, Mechanical and Manufacturing Engineering
Heftet /
2014
/ Engelsk
Produktdetaljer
ISBN
9783037859407
Publisert
2014-02-06
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1540 gr
Høyde
240 mm
Bredde
170 mm
Dybde
42 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
832
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the 2013 International Conference on Materials, Mechanical and Manufacturing Engineering (IC3ME 2013), October 19-20, 2013, Guilin, China.
The 162 papers are grouped as follows:
Chapter 1: Advanced Materials;
Chapter 2: Materials Processing Technologies;
Chapter 3: Mechanical Research;
Chapter 4: Products Design and Manufacture;
Chapter 5: Information Systems and Computer Applications;
Chapter 6: Related Topics
Les mer
Selected, peer reviewed papers from the 2013 International Conference on Materials, Mechanical and Manufacturing Engineering (IC3ME 2013), October 19-20, 2013, Guilin, China
- Preface and Conference Organization
- Chapter 1: Advanced Materials
- Effect of Lithium Difluoro(oxalato)Borate-Based Electrolyte on the Performance of LiNi0.5Mn1.5O4 for High-Voltage Lithium-Ion Batteries
- Research of Dispersant Quantity in each Stage of Grinding Calcium Carbonate
- Study on Bamboo Culm Used for Structure Axial Compression Performance Numerical Simulation
- Influence of Auxiliary Material on the Performance of the Resin Bond Used in Abrasive Tools
- Effect and its Mechanisms of Hydrated Lime on Water Stability of Hot Asphalt Mixture
- Effect of Al and Zn Content on the Preparation of Semisolid Mg-Al-Zn Magnesium Alloy
- Effect of Microstructure on Mechanical Properties of High Carbon Steel Wire Rod
- Preparation, Characterization and Magnetic Property of MFe2O4 (m=Mn, Zn, Ni, Co) Nanoparticles
- Green Process for Preparing Cellulose/Reactive Epoxy (BGE) through an In Situ Chemical Blend (Pre-Hybrid Polymer Bio-Composite)
- Improve Efficiency of Organic Solar Cell by Adding Dispersed ZnO Nanoparticles
- Study on the Preparation of New Thickener in Reactive Printing
- Numerical Simulation of Binary Alloy Crystal Growth Using Phase-Field Method
- Ti (CN) Precipitation in Ultra-High Strength Ti Micro-Alloyed Steels with 700MPa Yield Strength on TSCR Process
- Emulsion Polymerization of Methyl Methacrylate and Butyl Acrylate Using Non-Ionic Polyurethane as Emulsifier
- The Component Analysis of Penetration Sealer Materials
- Effect of Sintering Aids on the Densification of Andalusite Ceramics
- Magnesium Ferrite Powder and its Composite Electrospinning Nano-Fiber Preparation
- Comparison of Prediction Models for Concrete Carbonation
- The Influence of Surface Active Agent on Zn Base Brazing Filler Metal Soft Solder
- Encapsulation of Vitamin E in Glassy Carbohydrates by Extrusion
- Applications of Wood-Plastic Composites (WPC) in the Design of Multimedia Speaker Box
- Localized Electrochemical Corrosion Characteristics of Carbon Steel in Seawater
- Preparation and Mechanical Properties of Short Antheraea pernyi Silk Fiber Reinforced Onion Composite
- Tribological Properties of Ti-Al Alloy Self-Lubricating Composite Materials
- Diffusion Dynamics of HAc from Cellulose Acetate Filament during Coagulation Process
- Microstructure Evolution of Hypereutectic Al-Si Alloy in Semi-Solid Compression Deformation
- Effects of Tourmaline Powder on Growth Activity of Marine Bacteria and Diatoms
- Molecular Simulation Study Conformation and Energy of Polyaniline/Graphite Composites
- Synthesis and Characterization of Cellulose/Quaternary Phosphonium Salt
- Study on Structure Design and Properties of Super Absorbent Copolymerized with Milk Protein Grafted Acrylic Acid
- Preparation, Characterization of Supported Phosphotungstic Acid HPW-MCM-48 and Photocatalytic Degradation of Aqueous Methyl Orange
- Boundary Element Analysis of Accelerated Chloride Diffusion in High Performance Concrete
- Different Performance of Foam Concrete Caused by Two Types of Fiber
- Study on Color Change of Brown Sapphire in Changle, Shandong
- Tensile Properties of 15wt. %TiB2/7055 Composite Fabricated by In Situ Method
- The Complexation of Calix[6]Arene Sulfoxide Derivative with Uranium
- Adsorption of Cr (VI) by Cross-Linked Magnetic Hydroxamated Chitosan
- Sulfur and Lead Isotopic Geochemistry of the Shidi Pb-Zn Deposit in Xiushan County, Chongqing
- The Kinetics Studies for the Adsorption of Furadan from Aqueous Solution by Orange Peel
- Electro-Thermal Effect Analysis on GaAs PHEMT Based on Physical Model
- Progress of the Current Interface Research on Carbon Nanotubes Reinforced Aluminum-Matrix Composites
- Creep Properties and Life Estimation of P91 Steel with Low Hardness
- Half-Metallic and Optical Properties of Cu and Cr Codoped AlN
- Determination of Fluoride in Antarctic Krill Euphausia superba Using Ion Chromatography
- Preparation and Characterization of Double Activity Sulfate-Gallate Bagasse Xylan
- Effect of Sintering Time on the Mechanical Properties of WC-8Co Cemented Carbide for Friction Stir Welding Tool
- Influencing Factors and Conditions on the Synthesis of Double Activity Sulfate-Gallate Bagasse Xylan
- Preparation Process of Green Ceramic Coating of Magnesium Alloy through Micro-Arc Oxidation
- Impact Properties of Particulate Reinforced Aluminum Matrix Composites
- Charaterization and Catalytic Activity of CuO and NiO Supported on ZrO2 for CO Low Temperature Oxidation
- Characterization and Microwave Absorption Performance of CNTs/Fe3O4/PANI Nanocomposites
- Study on High Order TiO2 Nanotube Arrays and the Mechanical Properties
- Chapter 2: Materials Processing Technologies
- Synthesis and Exchange for Li+ of Spinel Type Material LiMn0.75Ti0.5O3
- The Synthesis and Ion-Exchange Property of Li0.5Mn1.375O3
- Study of an Inorganic Ion Exchanger LiMn1.25O3
- Prepare and Properties of Titanium with Surface Nanostructure by High Energy Shot Peening
- Study of Adhesive Curing Pressure in Process of Ferrite Phase Shifter
- Effect of Artificial Aging on Intergranular Corrosion of 6063 Al Alloy
- Grain Refinement of Mg97Y2Cu1 Alloy Solidified with Pulsed Direct Current Magnetic Field
- Springback Experimental Research of Advanced High-Strength Steel
- Direct Synthesis and Characterization of Three-Dimensional Graphene Foam
- Nd,Yb:YAG Laser Crystal Production and its Property
- The Synthesis of a Polyaspartic Acid Ester and Development of the Coatings
- Effect of Interlayers on the Structure and Properties of TiAlSiN Coatings Deposited on High-Speed Steel Substrate
- An Investigation of Carburized Layers on Austenitic Stainless Steels
- Effect of Cold Spray Processes on Friction Stir Welded Microstructures of AZ31 Magnesium Alloys
- Ceramic Powder (Silicon Carbide) - Monitoring and Influencing Process its Production
- The Preparation of Color Ink-Jet Paper Coating and the Investigation of its Printing Quality
- An Experimental Study on Synthesizing TiC-10Ni Composite Coating Using Electro-Thermal Explosion Ultra-High Speed Spraying
- Effects of Mechanical Vibration and Pouring Temperature on Solidified Structure of Superalloy K4169
- GPU Accelerated Finite Element Simulation for Ultra-High Strength Steel Quenching
- Managing Varnish of Turbine Oil
- Chapter 3: Mechanical Research
- The Dynamic Simulation of Engine Slider-Crank Mechanism Based on ANSYS and ADAMS
- The Dynamics Simulation of Tracked Vehicles on the Hard and Soft Ground Based on the RecurDyn
- A Calibration Approach for the Parallel Kinematics Machines Tools Based on Error Sensitivity Analysis
- The Particle Motion and Power Theory Analysis of Centrifugal Field
- An Approach for Continuous Small Line Blocks High Speed Machining of Embedded Systems
- Fatigue Crack Prediction of LC9 with Corrosion Damage Considering Effect of Load Frequency
- Resonance Reliability Sensitivity Analysis for Random Cam Mechanism System
- Using Stress Relaxation Data to Predict Creep Behavior
- Experiment Verification and Model Analysis of Partially-Filled Liquid Tank under Different Liquid Level
- Study on Modeling Method and Characteristics of Bearing System with High Rotation Speed
- Analysis of Equivalent Parameters for Honeycomb Sandwich Mirror
- Application of Hidden Markov Models in Ball Mill Gearbox for Fault Diagnosis
- Mechanical Properties Analysis for Compression Equipment of Underground Lifting Compression Processing Station
- Four-Order Parabolic Transmission Error Design of Helical Gear Based on Meshing Area
- Finite Element Analysis on the Directly Buried Heating Bent Pipeline with Many Break Angles
- Small Line Segment Interpolation Algorithm for Smoothing Machining
- Finite Element Analysis of Crystal Furnace Based on ANSYS Workbench
- Research on a Variable Degree of Freedom Luffing Mechanism, Part I
- Research on a Variable Degree of Freedom Luffing Mechanism, Part II
- The Calculation of Train Slipstreams on Platform of Underground High-Speed Rail Station
- Numerical Simulation of Free Surface Flows by Using Weakly Compressible Corrected MPS Method
- Analytical Prediction Model for Fatigue Crack Propagation Rate under Tension-Compression Loading
- Elastic-Plastic State of Inhomogeneous Soil Array with a Spherical Cavity
- Tensile Properties of Friction Stir Welding Aluminum Alloys Used in Aviation
- Crack Propagation in Concrete with Silica Particles
- Comparison between Experiments and FEM Simulations of the Reinforced Concrete Structure under Shake Table Test
- Parameter Identification of a Stress Relaxation Model Based on Differential Evolution Algorithm
- Studies on Mechanical Properties of Mulberry Branches Scrimber
- Health Evaluation for Durability of Harbor Engineering in South China Based on AHP
- Determination of a Loading Pressure in the Metal Forming by the Given Movements
- Skid Line Prediction in Automobile Panel Forming Process
- Structural Behaviour of Single Layer Space Frame with Member Arrangement Following Spiral Phyllotaxis
- Chapter 4: Products Design and Manufacture
- A Study of a New Seat-Suspension of Commercial Vehicles Using Magneto-Rheological Dampers
- A 3D Numerical Investigation on Droplets Distribution in a Wave-Plate Separator
- Simulation on Linear-Motor-Driven Water Hydraulic Reciprocating Plunger Pump
- Thermal Design Improvements on Avionic Device in Confined Space under Supersonic Conditions
- Research and Design of the Control System for Natural Gas Heater
- Efficient Recursive Dynamics and Real Time Simulation of Flexible Space Robots System
- Method of Holes Machining Path Optimization for NC Turret Punch Press
- The Development of Robot for Work of Drainpipe Deposit Cleaning
- Kinematics of a New 14 DOF Humanoid Biped Robot
- Optimization and Simulation on Pressure-Reducing Valve in Water Hydraulic Vane Pump
- Influence of Port Plate Closed-Compression Angle on the Vibration and Noise of a Water Hydraulic Piston Pump
- Dynamic Response of a Main Shaft System of Francis Turbine-Generator Units
- Element Bearing Ratio Based Shakedown Analysis for Branch Pipe
- Finite Element Analysis and Structural Optimization of Mine Man-Car Skip Underframe
- Research on the Flexible Product Platform Technology of Machining Center
- Method of Tool Path Optimization in Impeller NC Machining Based on Configuration Space Theory
- Modal Analysis and Fault Diagnosis of Dynamic Machine Foundation under Ambient Excitation
- Accurate Mathematical Model of Profile Curve Generated by Pre-Grinding Hob and Three-Dimensional Simulation of the Gear Generation
- The Virtual Prototype Dynamic Simulation Design for the Lunar Vehicle Based on ADAMS
- Mechanism Design of the Automatic Adjustment of the Number of Inserting Fuses of the Inserting Fuse Machine for Firecracker
- Structure Design and Optimization of the Metal Spoon Cross Rolling Mills
- Boring-Rolling Process Research and Tooling Design of Hydraulic Cylinder
- Application of UG/WAVE Technology in the Design of Automobile Front Axle
- Researcher on Manufacturing Surface of Air Compressor Cylinder by Vibration and Mechanism of Lubrication
- Chapter 5: Information Systems and Computer Applications
- The Analysis of Similarity Measure Function in Image Matching Algorithms
- The Research and Application on Illumination Model Algorithm of Oilfield Virtual Reality System
- A New Method of Expressing Point Model Based on Kd-Tree for Plane Area
- The Seawater Quality Evaluating of the Yangtze Estuary Wetland Based on BP Neural Networks
- OSK Digital Circuit Design for a 14-bit 2.5 GSPS RF-DDS
- SAR Image Denoising Using an Improved Adaptive Bitateral Filter
- Design and Practice Research of Sports Injury Network Consulting System
- Design and Development of Physical Education Teaching Network Courses in Colleges and Universities
- Design and Application of Real-Time Flight Information Acquisition System
- Development of Computer-Aided Design Module for Mechanical Products Based on AutoCAD
- Research on the Facilities Layout Planning in MTO Manufacturing Industry Based on Genetic Algorithm
- Design of Smart Home Management System Based on GSM and Zigbee
- A Novel Traffic Flow Forecasting Method Based on the Artificial Neural Networks and Intelligent Transportation Systems Data Mining
- Study on Data Compression Algorithm Based on Semantic Analysis
- Chapter 6: Related Topics
- Application Research of Memory Alloy Washer on Power Equipment Safety and Energy Saving
- Behavior of the Spruce and Birch Wood from the Fire Safety Point of View
- The Flooding Tolerance and Growth Characteristics of 2 Woody Species by Flooding Durations for Aquatic Ecosystem Restoration
- Comparative and Study the Influence of Sand Depth for Liquefied Evaluation
- Investigation of Silicone Oil Leaching in PDMS Fouling Release Coating by Confocal Laser Scanning Microscope
- Research on Surface Roughness Measurement of ACSR Using Light-Section Microscope
- A Novel Sparse Weighted Least Squares Support Vector Classifier
- Inverse Generalized Harmonic Numbers with Riordan Arrays
- Empirical Research on Business Intelligence Success
- Exploring the Effect of Organizational Dynamic Capability on Data Quality-BI Success Relationship
- Solving the Lower Reliability Confidence Limit of Binomial Distribution by Using Numeric Iteration Method
- Spillage Control Method in the Production Process of Argon Oxygen Smelting Low-Carbon Ferrochrome
- Reform and Practice in Major-Division Engineering Training Model Based on Project-Driven
- Effect on Tailing Dam Stability of Rainfall Infiltration
- Experimental Study on Direct Shear Creep Characteristics and Long-Term Strength of Red Layer Sliding Zone Soil in Southern Hunan
- Project Teaching Reform and Practice in the Art and Design Course
- Power Transfer Coefficients between Two 3D Semi-Infinite Solids in EFEA Formulation
- Modeling, Analysing and Simulation – Way to Good Operation Phase of Residential Stock
- The Evolution and Discriminate Analysis of the SPT Discrimination Methods in Code of Seismic Design of Building in China
- The Applicability of Code for Characteristic Depth in Liquefied Evaluation
Les mer
Produktdetaljer
ISBN
9783037859407
Publisert
2014-02-06
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1540 gr
Høyde
240 mm
Bredde
170 mm
Dybde
42 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
832