4th International Conference on Industrial Engineering (4th ICIE 2018)

Selected, peer reviewed papers from the 4th International Conference on Industrial Engineering (4th ICIE), May 15-18, 2018, Moscow, Russian Federation

• Preface
• Chapter 1: Polymers, Composites, Ceramics and Semiconductors
• Analysis of Elastoplastic Behavior Model of Antifriction Polymers
• Compressive Strength of Four-Layer Titanium-Steel Adapter with Soft Interlayer of Varying Thickness
• Creation of Oil-Filled Composites of Tribotechnical Purpose Based on Aromatic Polyamide Phenylone C-2
• Dependence of the Elastic Properties of a Single-Walled Carbon Nanotube on its Chirality
• Effect of Organoclays on Fire Resistance of Siloxane Rubbers
• Effect of Thermochemical Treatment on the Structure and Mechanical Properties of Materials Based on Aluminum Oxide
• Electromagnetic Effect of Eddy Currents in Composites with Conductive Components: Magnetic Field Strengthening and its Simple Analytical Estimation
• Fatigue Testing Method of Test Coupon and Structurally Equivalent Samples of Carbon Fiber Reinforced Polymer for Gas Turbine Engine Parts and Assemblies
• High Performance Thermal Grease with Aluminum Nitride Filler and an Installation for Thermal Conductivity Investigation
• Hydrolytic Resistance of Na₂O–SiO₂–SnO₂ Glass System
• Increase in the Slag Resistance of Refractories Based on the Al₂O₃-SiC-SiO₂ System
• Influence of Structure and Composition of the Fibrous Materials on the Performance Characteristics of Thermal Protection Structures with Combined Functions
• Stress-Strain State Exploration of Stringer Made of Composite Materials Depending on Layers Stacking Structure
• Investigation of the Usage of the Opportunity of the "Dinur" OJSC Scrap in the Packing Glass Manufacture
• Synthesis of Porous Heat-Insulating Material from Industrial Waste
• Lightweight Ceramic Materials with Increased Strength Based on Microporous Silicates
• Conversion of Elastic Wave Polarization in Calcium Molybdate Layer
• Microstructural Analysis of Granular Metal-Ceramic Composite Materials of Matrix Type
• Modification of the Hematite Filling Surface of New Composition Material during High Pressure Testing
• Reinforced Antifriction Epoxy Fluoroplastics
• Stochastic Micro-Meso Modeling of Cross-Ply Composites for Prediction of Softening
• Structure Formation during Liquid-Phase Sintering of the Diamond-Containing Composites with Sn-Cu-Co-W Binders
• Technological Processes for Obtaining Monolithic Polydisperse Protein-Base Systems
• The Dependence of Gibbs Energy of Formation of Niobium Mononitride on its Composition and Temperature in the Range of 1773-2023 K
• The Development of Multi-Directional Spatially Reinforced Material Structural Theory
• The Effect of Soft Interlayers on the Behavior of a Four-Layer Titanium-Steel Composite at High Temperatures
• The Influence of Milling Regimes in Beater Mill on Particle Size Distribution and Structural Characteristics of Strontium Hexaferrite Powder
• The Influence of Structure-Forming Factors on the Properties of Polymer Composite Material under Static Loading
• The Structure, Phase Composition and Rheological Properties of Powders Obtained by Chemical Dispersion of Al Alloys with Mo, V and Zr
• Theoretical Description of Electrophysical Properties of Syntactic Carbon Foams
• Functional Characteristics of QD-InAs/GaAs Heterostructures with Potential Barriers AlGaAs and GaAs
• Growing of AlInGaAsP Solid Solutions on InP Substrates for Photovoltaic Converters
• Lead Germanate Pb₅Ge₃O₁₁ Crystal Growth
• Low-Energy Ion Technique for Semiconductor Surface Preparation
• Chapter 2: Steels and Alloys, Metallurgical and Metalworking Technologies
• A Study of the Structure and Properties of Austenitic Metastable Steels under Strain
• A Study of the Structure and Regularities of Formation of the Compounds during Explosive Welding of Steel-Aluminum Composite
• About Raising of the Gas Vortex Stabilization Efficiency in Plasma Torch for Metal Cutting
• About the Possibility of Increase in CGI Properties by Austempering
• About Turning the Surface of a Part Formed by a Combination of Dissimilar Structural Materials with Break Elements
• Adaptation of the Methodology of Designing Cylindrical Milling Processes to the Profile Milling Processes
• Combined Methods of Laser Processing of Steel
• Comparative Evaluation of Analytical Methods for the Determination of Coefficients of Friction and Stresses when Wire Rod Drawing
• Crystallographic Peculiarities of Shear α-γ Transformation in Austenitic Stainless Steel in the High Temperature Area
• Determination of Beta-Transus Temperature of Two-Phase Titanium Alloys Using Differential Scanning Calorimetry
• Development and Research of the Method of Severe Alternating Deformation in the Process of Rolling of Thick Steel Sheets and Plates Made of Non-Ferrous Alloys
• Features of the Structure Formation at Laser and Laser-Arc Deposition from Aluminum Wire
• Free-Cutting Cr–Ni–Mo Steel
• Geometrical Errors of Surfaces Milled with Convex and Concave Profile Tools
• Heat Treatment Regimes Influence on Mechanical Properties of Forging Products of α+β- and Pseudo- β-Titanium Alloys
• Influence of Different Factors on Withdrawal Speed of Continuous Cast Billet
• Influence of Electrode Gap’s Value in Electron Gun on the Penetrating Ability of Electron Beam during the Implementation of Additive Processes
• Influence of Technological Parameters of Direct Laser Deposition Process on the Structure and Properties of Deposited Products from Alloy Ti-6Al-4V
• Influence of the Roughness on the Mechanical Properties of Ti-6Al-4V Products Prepared by Direct Laser Deposition Technology
• Influence of the State of the Contact Surfaces on the Formation of the Joint of Steel and Brass during Cold Cladding
• Research of the Mechanism of Destruction of Compression Molds for Casting under Pressure of Color Alloys
• Investigation of Grey Cast Iron Microstructure Influence on its Heat Resistance
• Methodology of High-Carbon Wire Rod Perlite Grain Grade Identification
• Laser Welded Joints of High-Nitrogen Austenitic Steels: Microstructure and Properties
• Microstructure and Mechanical Properties of High Strength Alloyed Steel for Aerospace Application
• Modification of Copper
• Morphology and Chemical Composition of Silicon Carbide Surfaces Interacting with Iron, Cobalt, and Nickel in Microscratching
• The Effect of the Operating Speed and Wheel Characteristics on the Surface Quality at Creep-Feed Grinding Titanium Alloys
• Ni-Fe Alloys as Perspective Materials for Highly Efficient Magnetostatic Shielding
• Numeric Loading Simulation of Titanium Implant Manufactured Using 3D Printing
• Properties of Austenite in Maraging Steel
• Relaxation Processes in Ti-Al Composite Material after Rolling
• The Investigation of Microhardness of Grey Cast Iron Dendritic Structure
• Research Regarding Heat Treatment Influence on Properties of Chromic Steel 40H GOST 4543-71(DIN 41Cr4, Gb 40Cr, ASTM 5140) with Quenching in Polymer Solution with Purpose of Matching Tubing Pipes which Used in Oil and Gas Extraction
• Shape Indexes for Dieless Forming of the Elongated Forgings with Sharpened End by Tensile Drawing with Rupture
• Method for Determining the Optimum Counter-Flexing Force of Working Rolls during Sheet Rolling
• Statistical Analysis Method of the Grain Structure of Nanostructured Single Phase Metal Materials Processed by High-Pressure Torsion
• Statistical Analysis of Histograms of Grain Size Distribution in Nanostructured Materials Processed by Severe Plastic Deformation
• Strain State during Rolling of Aluminum Samples
• Strength of a Threaded Joint on Cut in Holes with Flanges Formed by a Rotating Punch in Thin-Sheet Work-Pieces
• Structure Formation in High-Nitrogen Steel during Heat Treatment
• Structurization and Properties of Magnetoplastics Made of Mechanically Activated Amorphous-Crystalline Powder Alloys Based on the Nd-Fe-B System
• Study of Interstitial Impurities Influence on Properties of Titanium Alloy Ti-5Al-5V-5Mo-3Cr-1Zr
• Synthesis of Aluminum-Matrix Alloys with Al-Zr-W by Metallothermy of Oxides
• The Effect of Annealing on Mechanical Properties, the Number of Fluidity, and the Size of Coherent Scattering Regions in AMg1, AMg5, and AMg6 Alloys
• Effect of Manganese and Magnesium Content and Conditions of Annealing on Mechanical Properties and Cracking Formation during Bending of Aluminum Alloy AA3005
• The Possibility of Obtaining Electrical Steel with Texture {100} <001>
• Thermal Cycles and Peculiar Properties of Austenite Decomposition when Laser-Hybrid Welding Steel of K60 Strength Class
• Thermal Processes Simulation during Processing Bevel Gears
• The Influence of Heat Treatment on the Size of the Carbide Inclusions and Hardness of Multilayer Composite Material ZD-0803
• Thermomechanical Hardening of Steels
• To the Influence of the Deformation Speed on Hardening Process during the Cold Sheet Forming
• To the Question of Evaluation of the Anode Voltage Drop
• Using of Smoothed Particle Hydrodynamics Method for Constructing a Mathematical Model of Electron-Beam Surfacing Process
• HN45VMTYUBR Alloy: Impact of Laser Beam Welding Modes on Microstructure and Distribution of Alloying Elements in the Seam
• Zero “Background” Line for Iron Alloys Samples Dilatographs Decoding
• A Study of the Influence of the Manufacturing Process Parameters on the Distribution of Residual Stresses in Pipe Walls during Sink Drawing
• FEM Simulation of Copper Busbar Pressing on the Continuous Extrusion Line "CONFORM"
• The Investigation of the Influence of Friction and Roll Calibration on the Pipe Formation during Plug Rolling
• The Investigation of Pipe Ends Formation under Reduction Mill Rolling
• Computerized Study of Intense Deformed State of Grinding Plate of High-Manganese Steel
• Constructing Isotherms of Oxygen Solubility in the Liquid Metal of the Cu-Na-K-O System
• Thermodynamic Assessment of the Na-Cu and Na-K Binary Systems
• Development of the Algorithm for Determination of Mechanical Properties of Steel 20 with Different Levels of Cumulative Fatigue Damage with the Application of Compact Samples
• Impact of High-Frequency Vibrations on Metal Items Resistance to Cyclic and Axial Loads
• Effect of Superheat Melt Treatment on Microstructure and Mechanical Properties of Aluminum Alloys Produced by Lost Foam Casting
• Examination of Hardening Curves Definition Methods in Torsion Test
• Hot-Rolled Texture of FCC and BCC Metals
• Induction Heating Technology for Steel Wire Processing
• Influence of Heat Treatment on Microstructure and Mechanical Properties of Selective Laser Melted TiAl6V4 Alloy
• Influence of Nitrogen and Nitride-Forming Elements on Properties of Boron-Treated Steel
• Interaction of Phosphorus with Impurity Atoms in BCC Iron
• Structure and Stability of Intermediate (Fe, Cr)₇C₃ Carbides
• Prediction of Temperature Fields in the System “Casting and a Damp Sandy-Argillaceous Mold”
• Production of Al-Si Alloys by the Direct Silicon Reduction from the Amorphous Microsilica
• Rheological Properties and Substantiation of Hot Rolling Regimes of Low- and Medium Carbon Structural Steels
• Rolled Metal Structure Resource Saving Preparation for Long-Length Hardened Bolt Upsetting
• Selective Laser Melting of AlSi12 Powder
• Statistical Analysis of Metal Particles Forming during Reduction of Oxides with Low Iron Content
• Strength of SHS Aluminium Cast Iron from Dispersed Mechanical Engineering Waste
• Studying the Peculiarities of Steel Grinding Balls Structuring
• The Influence of the Hardening Curve Profile on the Drawing Force of a Bar
• The Study of the Characteristics of Metallic Powders after Electroerosion Dispersion
• Chapter 3: Chemical and Hydrometallurgical Technologies
• Adsorption Activity of Thermally Modified Shell Hazelnut in Relation to Ions Ni²⁺
• Asphaltenes as Nano Objects Regulating Macrostructure of Solid High-Carbon Substances
• Carbon Nanotubes Microenvironment in Ionic Surfactant Water Solutions
• Designing a Technology of Industrial Sewage Waters Purification from the Spent Polishing Powder Based on Ceric Oxide
• Effect of Lime and Organic Binders on Clay Gold-Bearing Ores Filterability
• Thermal Capacity of Enriched Fuel Briquets Produced from the Fine of Ekibastuz Coal
• Influence of Zinc Sulfide Wetting in Surfactants Presence on Leaching Parameters
• Investigation of Fuel Briquettes Properties Using Wastes of Mineral Wool Production
• Isolation of Strontium in Antimonates
• Magnetic Petroleum Sorbent Based on Waste Kieselghur Sludge from Oil Extraction Industry for Removing Petroleum Products from Water Surface
• The Development of a Purification Method of Sewage from Chromium (VI) by Iron-Containing Waste
• Methods and Materials of Nanotechnologies for Improving the Boiler Fuel Properties
• Microcrystalline Cellulose Based on Cellulose Containing Raw Material Modified by Steam Explosion Treatment
• Physical and Chemical Properties of Activated Lignocellulose and its Areas of Application
• Nickel Extraction from Poor Solutions by Sorption on Modified Coke
• Evaluation of the Processing Opportunity of Galvanic Production Sludges with Nickel Recovery
• Optimization of Wastewater Treatment from Cd²⁺ Ions Using Slag of Electric Furnace Steelmaking Production
• Simple Universal Kelvin Equation Valid in the Critical Point Vicinity, External-Internal State Correction, and their Application to Nitrogen Capillary Condensation in Mesoporous Silica SBA-15
• Technology of Producing of Sodium Hypochlorite from the Concentrate of Reverse Osmosis Systems
• The Purification of Electroplating Industry Effluents with Agricultural Waste
• Alternative Technology of Nickel-Cadmium Batteries Recycling
• Application of Ecologically Clean Technology to Drying of Iron-Ore Pellets
• Development of the Metallurgical Waste Recovery Process
• Efficient Assessment of Physico-Chemical Properties of the Cryolite Melts for Research on the Improvement of Low-Temperature Aluminum Electrolysis
• Extraction of Metals from Wastes of Metallurgical Production
• Gold Electroextraction Fundamentals Using Zinc Three-Dimensional Cathode
• Novel Method for Comprehensive Processing of Low-Grade Copper Concentrate
• Investigation of Complex Treatment of the Gold-Bearing Antimony Flotation Concentrate
• Synthesis of Fe(III)-Based Inorganic Sorbent and its Application for Arsenic Sorption
• To the Problem of Reducing the Amount of Harmful Emissions when Refining Silver
• Chapter 4: Building Materials
• A Mechanism of Action of a Polyfunctional Modifier Made of Hydrocarbons Production Waste in Mineral Suspensions Based on Fine-Ground Cements
• A Study on Structure and Phase Composition of Cellular Ceramic Materials from Dispersed Silica-Rich Rocks
• About a Possibility of Usage of Sugar Beet Industrial Carbonate-Containing Byproducts in Dry Construction Mixtures and Oil Paints Manufacturing
• Applications of Calcium Hydrosilicates and Amorphous Aluminosilicates in Lime Dry Mixes
• Building Ceramics Based on Carbonate-Containing Raw Materials
• Building Ecomaterials Based on Secondary Raw Material
• Coefficients for Calculation of Deformation-Strength Characteristic of Concrete for Injection with Two-Stage Expansion
• Complex Organomineral Additives with Hardening Accelerator
• Creep and Long-Time Strength of Compression Elements from Foam Concrete
• Determination of the Geometric Parameters of Round Logs as Functional Materials for Wooden Housing Construction
• Effective and Ecological Technologies of Application of Structured Materials for Roadbed in the Permafrost Regions
• Efficient Autoclaved Silicate Concretes with the Use of Steelmaking Slag
• E-Modulus and Creep Coefficient of Self-Compacting Concretes and Concretes with some Mineral Additives
• Geo-Composite Materials with Preset Properties and their Application in Hydraulic Engineering Construction
• Heat Treatment of Wood in Liquids
• Composite Railroad Ties Obtained by the Energy Efficient Recycle of Wooden Railroad Ties
• Thermal Insulation Properties of Wood Polymeric Sand Composite
• The Study of Soundproofing Properties of Wood Polymer-Sand Composite
• Technological Features of the Production of Embossed Plywood
• Highly-Dispersed Wollastonite-Based Additive and its Effect on Fine Concrete Strength
• Influence of the Accuracy of Determining the Inner Diameter of Pressure Polyethylene Pipes by the Amount of Head Loss by Length
• The Choice of Chemical Composition and Raw Materials for the Production of Basalt Wool with the Defined Characteristics
• Method for Parameter Determination of Ceramic Products Compression Using the Mounting for Curves Readout
• Methodological Approaches in Assessing the Possibility of Using Waste Electrocorundum Materials in Concrete Compositions
• Nano Modified Foam-Fiber-Concrete Mixture
• New Concrete for Protection from Radiation in the Urals Based on Natural Fillers
• New Technology of White Portland Cement Production in the Ural Federal District
• Optimization of Fine-Grained Concrete Composition in Order to Improve the Quality of Units’ Front Surface
• The Formation of Composite Curing Systems Based on Technogenic Raw Materials
• Portland Cement with Mineral Fillers and Polymer Additives
• Problems of Autoclaved Aerated Concrete Treatment
• Producing Improved Masonry and Protective Paints by Means of Modifying and Introducing Additives in Liquid Glass
• Research of Thermophysical Properties of the Ultrathin Liquid Heat-Insulation
• The Processing of Citrogypsum for Obtaining Modified Gypsum Binders and Composite Materials on their Basis
• The Research of the Influence of Ferruginous Aggregates’ Surface and Polyfunctional Modifiers on Interfacial Phenomena and Strength Formation of the Contact Area in Concretes
• The Through-Dyed Autoclaved Silicate Concretes with the Use of Thermally Activated Iron Ore Raw Materials Refinement Tailings
• X-Ray Phase Analysis of High-Aluminate Cements under Conditions of early Compression
• Development of Sulfur and Silicon Dioxide Activation Method in the Sulfur Concrete Technology
• Slag Technogenic Formations as a Material for the Production of Silicate Products and Pig Iron
• Chapter 5: Surface Engineering and Coatings
• Anticorrosion Protection of Welded Joints of Oil Pipelines
• Defects of Porous Self-Structured Anodic Alumina Oxide on Industrial Aluminum Grades
• Elaboration and Investigation of Metallic Coating with Inclusion of Potassium Polytitanate
• Increase of Wear Resistance and Contact-Fatigue Strength of Wheel Steel by Plasma Hardening
• Investigation into the Effects of High Temperature on Mechanical Properties of Thermal Spray Coatings Applied by Plasma Spraying
• Increasing the Abrasive Wear Resistance of High-Chromium Steel after Cold Treatment
• The Use of Metastable Austenite to Increase the Wear Resistance of Steels of the Pearlite Class
• Engineering Method for Analysis of the Ability to Strain-Hardening of Steels
• Influence of the Parameters of Galvanomechanical Chromium Plating on the Coating Quality and Process Productivity
• Effect of Abrasive Tools in Galvanomechanical Treatment on the Roughness of the Deposited Chromium Layer
• Investigation of the Influence of the Form Factor of Finely Dispersed Carbon Components on the Hydrophobicity of the Surface
• Investigation of the Influence of Various Kinds of Hardening on the Surface Structure EI893
• Ion-Plasma Sprayed Coating as a Protective Decorative Coating for Copper-Nickel Alloy
• Layered Ni-Cr-Al Coatings for Air Tuyeres Protection from the Burnout
• Method for Synthesis of Retro-Reflective Coatings with Specified Optical Properties
• Using the Simplex Design Technique for Optimization of Modes of Burnishing with Ball Tools
• Modeling of the Structure of Heat-Insulating Semi-Transparent Materials and Coatings for Industrial and Transport Power Plants
• New Technology of Hardening of Chromium-Nickel Steel Parts
• New Decisions in Manufacturing Techniques of the Cemented Parts of Cars
• Numerical Solution of the Differential Diffusion Equation for a Steel Carburizing Process
• Structure and Thermophysical Properties of Coatings Formed by the Method of Microarc Oxidation on an Aluminum Alloy AK4-1
• Investigation of Protective Coatings for Carbon Fibers by the Sol-Gel Method
• Study on Surface Layers of Aluminum and Titanium Alloys and Analysis of their Scuff Resistance
• Tin Powders Electrodeposition from Choline Chloride Based Ionic Liquid
• Using VPr11-40N Brazing Powder as a Wear-Resistant Cladding for GTE Blade Airfoils
• Varying of Oil Consumption of Fluid-Film Bearing’s Surface Layer by Means of Application of Anti-Friction Coatings
• Laser-Spark Modification of the Surfaces of Structural Materials by the Example of St3
• Accelerated Forming on the Sol-Silicate Binder in Precision Casting
• Accelerated Tests of Protective Properties of Packaging Materials for Cold-Rolled Steel
• Application of Gas-Thermal Coatings on Low-Alloyed Steel Surfaces
• Features of Steel Tape Deformation-Strength Properties Formation by Plasma-Cavitating Treatment
• Gas Corrosion of Pyrolysis Furnace Coils
• Investigation of the Hydrogen Stratification of the Metal of the Active Gas Pipeline
• Methods for Determining the Quality of Galvanic Chromium Coating
• Modeling Calculation of the Corrosion Rate of Low Carbon Steel in Heat and Power Systems
• Chapter 6: Processing and Controlling Technologies
• Efficiency Analysis of the Friction Material for the Wind Turbine Braking System
• Experimental Study of the Effectiveness of the Vibromechanical Stabilization of Bearing Rings
• Improving Methods of Assessment of a Stress State of Structures According to the Results of Coercive Measurements
• Optimal Shape Selection of Heat Exchangers Surfaces during Convective Heat Transfer
• Photometric Method of Diagnosis of Bearing Units Operating with Hydrocarbon Mixtures
• Qualimetry Rating of Hot-Rolled Pipes
• The Analysis of the Work of Materials of Mouthguard Designs during Biomechanical Deformation
• The Method and Device for Automated Material Elastic and Proportionality Limits Calculation
• The Study of Ultrasonic Relaxation of Residual Stresses of Metal Plates Using Computer Simulation
• Video Control Application for Increasing of Materials Spectral Analysis Accuracy
• Automated Screwdown Mechanism of DUO-130 Rolling Mill
• Experimental Research of Thermo-Hydraulic Separators and Dispatchers in Heat Supply Systems
• On Modernization of Air Supply Systems for Improvement of Gas Distribution in Shaft Furnaces
• Resource-Saving System of Heat and Cold Supply in Power Complex of the Metallurgical Plant