Materials Engineering and Technologies for Production and Processing II
Heftet /
2016
/ Engelsk
Produktdetaljer
ISBN
9783038357933
Publisert
2016-10-14
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
1420 gr
Høyde
240 mm
Bredde
170 mm
Dybde
38 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
768
This edition published by results of International Conference on Industrial Engineering (ICIE-2016, May 19-20, 2016, Chelyabinsk, Russian Federation). In the issue are collected scientific papers from area of materials engineering and technologies for materials production and processing in the different areas of modern manufacturing. This collection will be useful for wide range of engineers and scientists from different areas of engineering knowledges.
Les mer
<p>Selected, peer reviewed papers from the International Conference on Industrial Engineering, May 19-20, 2016, Chelyabinsk, Russian Federation</p>
- Preface, Conference Committee
- Chapter 1: Functional and Special Structural Materials, Technologies of Coatings, Strengthening and Hardening
- Magnesium Dry Mixes for Outer Wall Decoration
- Research the Properties of Temperature High-Coercivity Permanent Magnets NdFeB
- Justification of the Choice Matrix Material of the Magnetoactive Elastomer for Working Camera-Channel Peristaltic Unit
- Process Engineering of Dimensional Fused Silica Etching
- Amorphous Copper-Based Alloys: Structure, Technology and Properties
- Increasing Corrosion Properties of Steel 04Cr25Ni6NMo3
- Mathematical Model of Nanostructure Formation in Binary Alloys at Electron Beam Treatment
- Nanostructured Strengthening of Springs and Spring Steels
- Application Features of the Cutting Tool, Hardened by Laser Pulsed Radiation
- Titanium-Containing Composite Sorbent-Photocatalyst Based on Calcium Silicates and Aluminosilicates
- Evolution of Macro-Scale Plastic Flow Localization of Tri-Layered Stainless Steel - Low Carbon Steel - Stainless Steel Metal with Digital Image Correlation Method
- Barium Hexaferrite Single Crystal Growth Using PbO and Na2O Based Flux
- Experimental Study of Ba7Fe4O13, Ba3Fe2O6, Ba2Fe2O5, BaFe2O4 Barium Ferrites
- Microcrystalline and Amorphous Photovoltaic Silicon Materials Performance Optimization
- Corrosion-Resistance of MAO-Coatings on Al-Si Alloys
- Analysis of Electrodynamics Properties of Materials with High Dispersity Metal Powder in Axial Moving Systems
- Study of Thermal Resistance and Mechanical Properties of Thin Sheets of Low-Alloyed Aluminum Al-Cu-Mn and Al-Mg-Si Alloys
- The Influence of Electromagnatic Field Microwave on Physical and Mechanical Characteristics of CFRP (Carbon Fiber Reinforced Polymer) Structural
- Phase Equilibria in the Copper-Rich Corner of the Cu-Ni-Si-Cr System
- Synthesis of Multilayer Vacuum Ion-Plasma Coatings Ti-Tin during the Surface Modification
- Comparative Analysis of Catalytic Activity in Complex NiO-CuO-Fe2O3-Cr2O3 Oxide System of Different Production Technologies
- Modification of Nanostructured Maraging Steels Surface with Atmospheric Nitrogen at Steel Hardening in Confined Space
- Thermal Diffusion Galvanizing in Ferriferous Zinc Powder
- The Structure of Carbon Nanotube Exohedral Complexes with Lithium in a Wide Range of Concentrations
- Peculiarities of Forming of the Wear-Resistant Cast Iron Coating Structure on Steel 45 upon Plasma-Powder Surfacing
- Hardening Process by Complex Local Deformation Investigation
- Metallographic Examination of Forming Improved Mechanical Properties via Surfacing of Steel HARDOX 450 with Flux Cored Wire
- Foamer Influence on the Foam Concrete Properties Obtained in the High-Speed Foam Generator
- Effect of the High-Heating on the Chemical and Phase Composition of the Al-Ni-Cr Layered Coatings
- Development of Resource-Saving Cellular Glass Technology and Materials Based on it
- Heat Treatment of Wear Resistant Steels for Mud Pumps
- Superplastic Behavior of an Al-Cu-Mg-Mn-Ag Alloy
- Use of Mathematical Modeling in Building Ceramics Functional Properties Studies
- Pore-Forming Additives for Ceramic Gravel Production Made of Technogenic Materials
- Analysis of Physico-Mechanical Properties of Composites Based on Polylactide and Thermally Modified Wood Fibers
- Investigation of Relationship between Structural and Crystallographic Condition of some Constructional Materials and their Mechanical Properties
- The Structure and Phase Composition of the Diffusion Zone in a Titanium and Steel Composite
- Work Softening and Low Cycle Fatigue of Molybdenum Alloy under Force-Controlled Loading and Elevated Temperatures
- FE Analysis of the Applicability of the Shear-Compression Testing to the Modeling of the Asymmetric Rolling Process
- The Impact of Explosion Welding Parameters on Al/Cu Laminated Composites Interface
- Investigation of the Diffusion Processes at the Interface of the Cu/Ti Metal Composite
- The Study of the Dissolution AlZr2 Ligatures in the Liquid Alloy AlMg6Mn1
- Tin and Nickel Influence on the Structure and Properties of the Leaded Bronze Obtained by Means of the Centrifugal Casting
- Dislocation Structure Evolution during Plastic Deformation of Low-Carbon Steel
- Hot Deformation of Martensitic and Supermartensitic Stainless Steels
- The Effect of Aluminum Oxide Additives on the Phase Equilibrium in Borosilicate Systems and Crystallization of Borosilicate Melts
- Plating Technology for Contact Joint Performance Improvement in Electrical Equipment
- Experimental Study of Contact Joint Characteristics in Electrical Equipment
- Experimental Study and Thermodynamic Modeling of Phase Equilibria in the PbO-Fe2O3 System
- Determination Features of the Component Diffusion Coefficients of the Fe-Cr-Ni-Gr Powder Systems Sintering
- Determination of Suitable Binder Grade According to the Superpave Mix Design Method for Southern Russia
- Auger and X-Ray Photoelectron Spectroscopy Study of the Tribocontact Surface after Laser Modification
- The Formation and Functioning of Surface Nanostructures at Tribocontact
- Gas Atomization of the Liquid 82N7HSR Nickel Base Alloy to Produce Micropowder for Additive and Coating Technologies
- The Manufacturing of the AlSi12-Al2O3 Composite Powder for Additive Production Methods
- The Study of the Contact Angle of Silicon Carbide High-Carbon Iron Melt
- Magnetic and Microstructure Study of Thin Films of FeCuNbMoSiB FINEMET Alloy
- Calculation of the Amount of the Reduction Required for the Formation of Compound Layers during Cold Rolling of Bimetals
- Application of Ion-Plasma Coatings with Low Droplet Phase Content
- The Effect of the Cast High-Manganese Steel Primary Structure on its Properties
- Use of the Electric Steel Melting Slag in Production of the Expanded Clay Gravel
- The Study of Aging Cold Rolled and Hot Dip Galvanized Automotive Steel
- Electropulse Machining of Metals
- Opening Wave Strain Strengthening
- Synthesis of Transition Metals Carbide Compounds in the Vacuum Arc Discharge Plasma
- Increasing the Intensity of Cementation Process of Tool Low-Alloy Steels by Surface Laser Treatment
- Gear Wheels Surface Engineering by Deformation Hardening and Carburization
- Peculiarities of Thermal Hardening of Experimental Sparingly-Alloy Tool-Class Steels
- Modern Methods and Technological Solutions for Effective Processing of Gear Wheels
- Formation and Structure of Diffusional Zinc Coatings Formed in Nanocrystallized Zinc Powders
- Kinetic Description of (Cr, Fe)7C3 Carbide Dissolution in Austenite of High-Carbon Fe-Cr-C Ternary Alloys
- Plasma-Electrolytic Treatment as an Innovative and Resource-Saving Technology of Metal Surface Treatment
- X-Ray Microanalysis of Hardmetal Powder, Produced by Electroerosion Dispersion of VK8 Alloy in Kerosene Environment
- Chapter 2: Innovative Technologies in Metallurgy Industry and Materials Processing
- Investigation of the Surface Layer Structure of High-Chromium and High-Strength Steels at the Variation of the Heating Temperature
- SHS Ferroaluminum Obtained from the Disperse Waste of Engineering
- Changing the Arc Efficiency during Melting of a Charge in Arc Steel Melting Furnaces
- Energy Reduction Technologies Based on the Lubricant Supply in the Roll Contact System "Quarto" during the Hot Strip Rolling
- Technology of Packing Materials for Metal Products
- Effect of Stress-Strain State during Combined Deformation on Microstructure Evolution of High Carbon Steel Wire
- Determination of the Basic Parameters of the Recovery Process for Extracting Iron from Iron and Steel Slag
- Experimental Investigation of Al-Alloy Directional Solidification in Pulsed Electromagnetic Field
- The Study of the Fluoroapatite of the Fine Coal Yuzhno-Yakut Basin
- Influence of the Microstructure Al-12%Si Alloy on the Properties of the Oxide Layer Formed with MAO
- Neural Network Modeling of Coefficient of Burden Resistance to the Gas Movement in the Lower Part of the Blast Furnace in Conditions of Operation with Coke Nut
- On Advanced Recycling Technology for Cutting Fluid and Waste Oils Produced at the Metallurgical Enterprises
- Structure Investigation of the Constructional Steel St3ps after Argon-Arc Plasma Treatment
- Efficiency Improvement of Sintering as a Result of Surface-Active Substance Use in Pelletizing at the JSC "Ural Steel"
- Calculation of Impeded Shrinkage Casting Processes in Sand Layer
- Narrow Jet Plasma as the Energy Efficient and Safe Technology for Metal Cutting
- Modeling of the High Temperature Creep and Rupture under the Complex Stress State
- Liquid-Phase Recovery of the Metallurgical Slag Using Induction Heating Installation
- Experimental Substantiation of a Method of Improving the Efficiency of Ultrasonic Drilling of Small Diameter Holes
- Solution to the Diffusion Problem in the Thermocyclic Nitrocementation of Steel
- Interaction of Hydrogen Atoms with Vacancies and Divacancies in bcc Iron
- Estimation of the Heat Stability of Hardened Cr-V Cast Irons
- Applying Thermal Coatings to Narrow Walls of the Continuous-Casting Molds
- Electropulse Processing of Gold-Bearing Ore
- Mathematical Modeling of Mechanized Technologies Soldering
- Carbon in Solidphase Reduction of Oxides
- Influence of Steel Chemical Composition and Modes of the Thermomechanical Treatment on Mechanical Properties of a Hot Rolled Plate
- Optimization of Welding Electrode Coating Composition Based on Simulation of Interaction Processes in Metal-Slag-Gas System
- Features of Processing of Corrosion Resistant Steels
- The Study of the Strained State of the Long-Length Aluminum Billet Obtained by a New Method - Multi-ECAP-Conform
- Linear Friction Welding of a Commercial Aluminum Alloy
- The Effect of the Additional Processing during the Crystallization of a Melt of the AD0 Aluminum Alloy on the Size of Grains
- Improving the Controlled Cooling after Wire Rod Rolling in the Finishing Block of Stands
- Separation of Fine Particles with the Set Dimensional and Physical Characteristics by Method of the Crown Separation
- Laser and Hybrid Laser-Arc Welding of High Strength Steel N-A-XTRA-70
- The Mechanism of Water-Soluble Polymer Аdditives and Parameters of the Pulse Electrolysis Effect on the Size Distribution of the Electrolytic Copper Powder
- Technologies for the Manufacturing of Multi-Layered Hollow Structures by Superplastic Forming
- Optimal Сontrol of Technological Process of Carburization of Automotive Gears
- Chapter 3: Materials and Technologies in Energy Production
- Water-Coal Suspension Preparation Using Electrohydraulic Coal Breakage Method
- Development and Implementation of Energy Efficient Burners at Power Stations
- Improvement of Liquid Organic Fuel Oils Operational Characteristics with Additives
- Low-Sulfur Fuel and Oil Production
- Optimization of Oil Particles Separation Disperser Parameters
- Trends and Problems of Biofuel Market Development in Kazakhstan
- Chapter 4: Technologies and Materials in Food Production
- Sonochemistry Effects Influence on the Adjustments of Raw Materials and Finished Goods Properties in Food Production
- Modeling of Potato Convenience of Exposure Effects of Ultrasound
- Effects of the Sonochemistry in the Rheology of Food Media
- Modern Technological Possibilities of the Environmental Safety of Food Production
- Chapter 5: Methods of Measurements and Analysis
- Application of Intelligent Technology in Functional Materials Quality Control
- Calculation of Metalwork Life with Allowance for Cyclic Degradation of Material in Operation
- The Technology of the Near-Field Interference Microwave Sensing
- New Method for Determining the Electron Streams in the Metals from the Measured Flows of Scattered Primary Radiation
Les mer
Produktdetaljer
ISBN
9783038357933
Publisert
2016-10-14
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
1420 gr
Høyde
240 mm
Bredde
170 mm
Dybde
38 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
768