Manufacturing Process Technology

Jiang, Zheng Yi Li, Shan Qing Zeng Jianmin Se alle

Heftet / 2011 / Engelsk

Produktdetaljer

ISBN

9783037850312

Publisert

2011-04-20

Utgiver

Trans Tech Publications Ltd; Trans Tech Publications Ltd

Vekt

8000 gr

Høyde

240 mm

Bredde

170 mm

Dybde

224 mm

Aldersnivå

P, 06

Språk

Product language

Engelsk

Format

Product format

Heftet

Antall sider

4482

Redaktør

Manufacturing Process Technology

Jiang, Zheng Yi Li, Shan Qing Zeng Jianmin Se alle

Heftet / 2011 / Engelsk

Jiang, Zheng Yi Li, Shan Qing Zeng Jianmin Se alle

Heftet / 2011 / Engelsk

Nettpris:

11.078,-

Levering 7-20 dager

This special volume aims to bring together the latest advances in, and applications of, surface engineering/coatings, modeling, analysis and simulation, materials forming, materials machining, welding and joining, laser-processing technology, casting and solidification, precision manufacturing technology and measurements, etc. It will not only furnish readers with a broad overview of the latest advances, but also provide a valuable summary and reference work for researchers in this field.

Les mer

Selected, peer reviewed papers from the International Conference on Manufacturing Science and Engineering (ICMSE 2011), 9-11 April, 2011, Guilin, China

Sponsors, Committees, Preface
1 Surface Engineering / Coatings
Ultrasonic Elliptical Vibration Turning Studty for Precision and Ultra-Precision Workpiece
Experimental Research on Improving Wear Resistance of Coating Surface by Magnetron Sputtering
The Study on Metallurgical Property of 380m³ Blast Furnace Slag of YIGANG
Research in Vacuum Diffusion Bonding of Ti-6Al-4V Alloy and Type 25 Low Carbon Steel
The Influence of Alloying Additives on the Machinability of Austenitic Stainless Steel
The Spray Angle Improvement of Single Inlet Pressure Swirl Atomizer Using Partial Structure Modifying
Study on Friction and Wear Behavior of GCr15/1045 Steel under Nano-Particle Additive Conditions
The Study of Hole Injection in OLEDs with Ultra-Thin Sol-Gel TiO₂ Layer
Mass Customization Management in E-Commerce Configuration with early Supplier Involvement
Prediction of 3D Cavity Hydrodynamic Noise Based on Equivalent Source Method
Numerical Simulation of the Effects of Cell Size on the Mechanical Property of Microcellular Polypropylene
Sliding Friction and Wear Test of TiAlN TiN Films and 40Cr Steel
Computer Simulation on Mo/Al₂O₃ Solar Energy Selective Absorbing Coating
Effect of Two-Step Deforming and Aging Process on the Properties and Microstructure of Cu-Cr-Zr-Mg-Si Alloy
Effect of Pre-Shot Peening on the Fretting Fatigue Behavior of Plasma Nitrided AISI 420 Stainless Steel at 350 °C
Microstructural Study of Nanostructured ZrO₂ Based Thermal Barrier Coatings Fabricated by High Efficiency Supersonic Plasma Spraying
Influencing Factors of AZ31B Sheet Deep Drawing
Preparation of ZrTiN Hard Coating and its Performance
Application of Monte Carlo Method in the Measurement Process Design According to next Generation of GPS
Integrated CAD System for Bridges Based on BrIM
Effects of TiO₂ on the Viscocity and Solidification Temperature of Mold Fluxes for the Stainless Steel
Contact Analysis for Joint Interfaces of Machine Tools Based on a 3-D Anisotropic Asperity Model
Grinding Performance of Permeated Grinding Wheel
Investigation of the Effects of Dielectric Inlet Pressure in Inner Jetted Dielectric EDM Milling
Research on the Adhesion of Stainless Steel Film on Gd by Magnetron Sputtering
Oxidation Resistance of CrN and CrAlN Coating Tools
Research on Producation of a New Type of Biological High Molecular Material Poly(γ-Glutamic Acid)
Industrial Preparation of SiC Ceramic Coating for High Temperature and Anti-Oxidation of C/C Composites
Influence of Friction on the Vibratory Response of Structure
Microstructures, Thermal Shock Resistance and Isothermal Oxidation Resistance of Nanostructured Ceria Stabilized Zirconia Coatings
Application of Repair and Anti-Corrosion Technology on Reinforced Concrete Structures of a Domestic Wharf
Study on High-Temperature Oxidation Characteristics of Pure Vanadium
Friction and Wear Characteristics of Electrodeposited Ni-MoS₂/Al₂O₃ Composite Coating
Influence of Liquid Phase Migration on Intermittent Extrusion of Aqueous Al₂O₃ Paste
On the Dispersants of Diamond-Ni-P Composite Electroless Plating and Properties of the Coating
High Temperature Oxidation Behavior of (Ti, Al) C Ceramic Coatings on Carbon Steel Prepared by Electrical Discharge Coating in Kerosene
Study on Contractive Rate Inspecting Testing Mould of Thermoplastic
Comparison of Different Content of Cd and Sb Element on the Microstructure, Mechanical Properties of As-Cast AZ31 Magnesium Alloy
Evaluation Equation of the Flat Compression Properties of Corrugated Sandwich Structure
Study on Active Screen Plasma Carburizing of Austenitic Stainless Steel
The Bifurcate Fracture Analysis of Linear Red Copper Penetrator
Fabrication of PET Fabric/Ni-Fe-B Alloy Composite through a Electroless Plating Process with a Novel Activiting Method
Biocompatibility Research of Medicine Titanium Alloy Coating by Microarc Oxidation
Design of Virtual Oscilloscope Based on S3C2410
Research on Lubrication and Wear-Resistant Mechanism of Ni60A/MoS₂ Composite Coating
Study on the Mechanism of Improving the Formability of DP Steel LTWB at the Elevated Temperature Level
The Simulation and Experimental Study of Metal Cutting Based on Cold Air Technology
Tribological Performance of Fabric Composites Filled with Nano-Additive under Varied Load Conditions
Polymer Cement Waterproof Coating and its Properties
Corrosion Characteristics of PEO Films on AZ31 Magnesium Alloys
Numerical Simulation of Casting Process for Gray Iron Butterfly Valve
Nickel-Diamond Compound Electroless Plating on Cast Aluminum Alloys
Process Research on High-Speed Small Hole Drilling by EDM Combined with Magnetic Field and Water Dispersant
Preparation and Oxide CMP Performance of Inorganics Coated Polystyrene Composite Particles
EIS Study of Molybdate Conversion Coatings Formed on AZ91D Magnesium Alloy
Microstructure and Properties of Fe–Al/Cr₃C₂RE Composite Coating Produced by HVFS
The Measurement for the Effective Anisotropy Constant of the Nanocomposite Permanent Magnetic Material Nd₂Fe₁₄B/α-Fe
Development of Visualization System for Aircraft Assembling Process Oriented Assembly Field
The Crystallization Characteristics of Carbon Nanotubes/Pb-Sn Composite Coatings
Study of Microstructure and Adhesion Strength of WC-Co Coating Sprayed by High Velocity Oxygen Fuel
Performance and Property of Ni Base Coatings by Using Plasma Arc Technology for 18Cr2Ni4WA Steel Repairing
Energy Consumption and Emissions Analysis of Natural Gas Exploitation
High Temperature Erosion Behavior of Mo-Si-Ni-Al Metal-Ceramic Composite Cladding Layer Produced by TIG Welding
Rheological Fracture Analysis of Beam
The Effect of Complexing Agent on the Surface of Aluminum Alloy Plating Ni-P Alloy
Polyhedral Oligomeric Silsesquioxane/PDMS Hybrid Coating Protecting Polyimide from Atomic Oxygen Erosion
Finite Element Analysis for Temperature Field of Laser Remelting Plasma Sprayed Ni-Based Gradient Coating on Ti6Al4V Alloy Surface
The Effect of NaOH on the Surface of Magnesium Alloy Ni-B Alloy Plating Properties
Temperature’s Effection to Electroplating Ni-SiC Plating on Aluminum Alloy
pH’s Effection to Electroplating Ni-SiC Plating on Aluminum Alloy
Preparation and Performance of Compound Polyurethane Foam Plastic Board for Freezing Prevention in Channel Lining
Effect of Carbon Fiber on Composites
The Experimental Analysis of Modifier on Fluid Magnetic Abrasivetool
The Research on Coating of Electroless Ni-W-P Ternary Alloys
Advanced Monitoring of Tool Wear and Cutting States in CNC Turning Process by Utilizing Sensor Fusion
The Bending Behavior of Surface Composite Layer Ni/WC Fabricated through Vacuum Infiltration Casting
Structural Reinforced Parts for Improving Roof Crush Performance
Study on Morphologies and Structures of Ceramic Coating Prepared by Micro-Arc Oxidation on TC4 Alloy
Preparation by Electroless Plating and Electromagnetic Shielding Effectiveness of Ni-Cu-Coated Calcium-Magnesium Silicate Whisker
Arsenic Removal from Wastewater Using Adsorptive Mediums
Preparation and Characterization of Al₂O₃/ZrO₂-MgO-CeO₂ Composite Coatings Prepared by Flame Spraying
Efficiency-Reinforcement Design of Hydraulic Reciprocating Sealing Driven by Ideal Solution
Photocatalytic Degradation of Polycyclic Aromatic Hydrocarbons on Soil Surfaces Using Fe₂O₃ under UV Light
The Optimization Analysis of Equipment Maintenance Based on Monte-Carlo Simulation
Study on Salt Fog Corrosion of FeCoCrMoCBY Amorphous/Nanocrystalline Alloy Coating
Influence of the Section Plane Position on the Performance of Power Ultrasonic Transducer
Effect of Heat Treatment on Structure and Hardness of Electroless Ni-P Plating
High Temperature Oxidation Behavior of NiAl and Ni₃Al Argon Arc Claddings
Influence of Temperature and Oxygen Pressure on the Oxidation Process for Preparing Tritium Permeation Barrier
Rheological Behavior of Polymethyl Methacrylate (PMMA) Filling through Micro Channels
Preparation and Properties of Electroless Deposited Ni-Sn-P Ternary Alloy Coatings
Residual Stress State of TIG Remelted Zone in the Weld Toe after Chilling Treatment
Realization of the Closed Cycle Diesel Control System
Slip Fascia Stiffness Effect to the Fifth Metatarsal Movement during Inversion Landing
Structure of Emulsion Cavitation Jet and Jet Peening Impact on the Fatigue of Plan Carbon Steel Q235A
Parameter Design and Result Analysis for Radial AC Hybrid Magnetic Bearing
Effect of SnO₂ Modification on Permeate Flux of Α-Al₂O₃ Microfiltration Membrane for Treating Fe(OH)₂ Suspensions
Experimental Study on Tungsten Leaching from Cemented Carbide
Microstructure and Cavitation Erosion Behavior of Carbide-Based Coating Deposited by Electrical Arc Spraying
Preparation and Properties of Weldable Self-Cleaning PVDF/PVC Blended Film
Analysis on the Anodic Oxide Film of Aluminum Pistons Formed in High Current Density and Wide Temperature Range
Study of TI64 Vibration Laser Metal Deposition Process
In situ Synthesis of Ceramic Phase Reinforced Fe-Based Alloy Surface Coating by PTA
Cavitation Erosion Characteristics of an Iron-Based Coating Prepared by High Velocity Arc Spraying
Microstructure and Properties of Mo₂FeB₂ Cermet Coating by Induction Heating
Influencing on Structure and Mechanical Properties of PA6/PP Blends for Different Graft Yield Compatibilizer
Optimization and Design for Parameter in Injection Molding Technology of Cell Shell of Polypropylene
The Research on Deformation Analysis of Rigid Packed Hole Assembly Dynamic Model in 3D Borehole
A Novel Tetrahedral Mesh Generation Algorithm for Finite Element Analysis
Tooth Surface Bi-Directional Envelop Machining Method of Involute Arch Cylindrical Gear
Improvement on the Manufacturing Process of the Dental Surgical Guide Made by a 5-Axis CNC Drill Press
Influence of Current Density on Structure and Performance of Micro-Arc Oxidation Coatings on AZ31 Magnesium Alloy
Research of Compress Anti-Surge Based on the Integral Separation PID Algorithm
Effect of High-Intensity Pulsed Ion Beam Irradiation on the Electrochemical Corrosion Behavior of AZ31 Magnesium Alloy
Preparation of LaNi₅ by FFC Cambridge Process
Preventing Sintering Bricks of Purple Sandy Shale from Lime Brust: Experimental Research on Fixing Calcium with Sulfur
Preparation and Application of Oxygen Quenching Pressure Sensitive Paints
Research of Radial-Axial Ring Rolling Process Curve
Technical Problems to be Solved in Outside Surface Galvanized and Inside Surface Plastic Coated Steel Pipe for Main Gas Pipe Line
Experimental Study on Wear Resistance of Engine Cylinder Based on Surface Hardening Technology
Study on Relationship between the Groove Structure and Efficiency of Electromagnetic Pump Used in Aluminum Alloy Casting
Dispersion of Carbon Fibers in the Hybrid Fiber Cement-Matrix Composites
The Experimental Study on Grinding Properties of Gas Quenching Steel Slag
The Design and Analysis of Nozzle
Room-Temperature Ferromagnetism in Ni-Doped Na_0.5Bi_0.5TiO₃ Crystals
The Study on the Precipitation Behavior of the Second Phase Particles for As-Hot Rolled Dual-Phase Nb-Bearing Steel
Film Formation Property of Mineral Particles as Grease Lubricant Additives at Different Friction States
Semi-Encasing Sucrose Ester and Grafting Silkworm Pupae Protein on Polyester Fabric to Modify Polyester Fabric Surface
Placement Optimization for Thermal Performance of Embedded Power Chip Microwave Modules Using BP-GA
Preparation and Optical Property of Mn-Doped ZnO Nanorods
Chemical Vapor Deposition (CVD) of ZrC Coatings from ZrCl₄-C₃H₆-H₂
Surface Characterization of Chinese Fir/TiO₂ Composite
Research about Relationship of Laser Quenching GCr15 Steel Bending Properties and Hardening Layer Fracture Fractal Dimension
Analysis and Solution of Hydraulic Cylinder’s Leakage Problem
Structure and Property of CrAlN Coatings Prepared by Bipolar Pulsed Dual Magnetron Sputtering (BPDMS) under Different Pulse Bias Voltage
Corrosion Resistance of Al₂O₃-ZrO₂ Composite Coating by Microarc Oxidation on 2A12 Aluminum Alloy
Optimum Autoclaved Cement Concrete Mix Design Based on Flexural Strength
Comparison of Surface Roughness Measurement in Dichromatic Speckle Patterns with Autocorrelation Method
Study of Double-Polar Micro-Arc Oxidation Ceramic Layers on Aluminum Alloy
Microstructure and Phase Composition of Iridium Coating on Molybdenum after Heat Treatment at 1400°C
Experimental Study on the Through-Mask Electrochemical Micromachining (EMM) Process
Numerical and Experiment Analysis of Rail Wear
The Lightweight Design on the Pressure Hull of Underwater Gliders Using ANSYS
Microstructure Characterization and Abrasive Wear Performance of HVOF Sprayed WC-Co Coatings
Influence of Different Wave-Lengths Artificial Light on Surface Discoloration of Dyed Veneer
The Application and Research for Estimation Method of Turning Cost
Influence of Electric Field Interference on Three Nozzles Electrospinning
Inheriting of Traditional Culture in Design
Functional Evaluation Software Design of Surface Topography Based on MATLAB
Research on Stress Calibration Technology on Aluminum of High-Speed Train Body Structure by Nondestructive X-Ray Method Measurement
The Research about Oxidation Kinetics of Ti60 Alloy and Ni-Co-Cr-Al-Y-Si Coating on Surface
Enhancement of the Service Lifetime of TiN Coated Punch Side pin by Adding a Small Amount of Yttrium
500MPa Seismic Rebars Developed by Nitrogen-Rich and Vanadium-Microalloyed, Controlled Cooling Technology
Thermal Effects of Aluminum Nitride
Study on the Incline Limit in Gas Metal Arc Welding Based Rapid Forming
Laser Cladding In Situ Tungsten Carbide Reinforced Ferrous Matrix Surface Composites
Study on Rapid Manufacturing of CAFÉ Injection Mold
The High-Temperature Oxidation Behavior of the Fe-Ni Based Alloy Coating Produced by Plasma Cladding
Anodic Aluminum Oxide Matrix Encapsulating Nonivamide for Anticorrosion and Antifouling Application
Study on Structure and Properties of Alloy Nodular Cast Iron Roller with Laser Heat Treatment
A Study on Dieless Incremental Sheet Metal Forming Using Water Jet Technology
Solid Modeling and Machining Approach of the Impeller Based on Five-Axis Machine Tool
Characterization and Corrosion Studies of Amorphous/Nanocrystalline Conversion Coatings Formed by Applying Static Magnetic Field on AZ91 D Magnesium Alloy
Direct Current Field Effect on Silicon Pack Cementation for 1045 Steel
The Initial Practice on Electro-Modification Processes to Al-12Si Alloys
The Influence of Coating on the Elastic Modulus of Basalt Filament Diaphragm Fabric
An Evaluation Model of Enterprise Informatization Level Based on Grey Whitenization Weight Cluster Analysis
Effect on Microstructure and Hardness of Plunger Piston of Fe-Based Composite Coating by Laser Cladding
Research on the Microstructure and Wear Resistance of Hardfacing Layer on Big Cold Trimming Die Insert
Study of the Ce-Mn Conversion Coating on 6061 Aluminium Alloy
The Finishing of Rolling Bearing Raceway by Electrochemical Mechanical Finishing (ECMF) Technology
Research on Factors Affecting Durability and Improvements for FRP Reinforced Concrete Structures
Study on the Mechanical Properties of PP/EPDM/Mesoporous MCM-41 Composites
A Hard and Thick Fe-Based Amorphous Composite Coating
Study on Extraction of Dioscin from D.zingiberensis
Microstructures and Properties of Laser Al Alloying on AZ31 Magnesium Alloy
Effect of Direct Current on the Semi-Solid Isothermal Heat-Treated Microstructure of ZA84 Magnesium Alloy
Observation and Removal of Atmospheric Micro-Contaminants on SUS304 Steel
The Real-Time Monitoring Tool States Based on Wavelet Analysis
Study on the Acquisition Method of a Digital Model for Oral Cavity Teeth Based on Point Cloud
Growth Process and Corrosion Resistance of Ceramic Coatings of Micro-Arc Oxidation on Mg-Nd Magnesium Alloys
Effects of Ultrasonic Deep Rolling on Fatigue Performance of Pre-Corroded 7A52 Aluminum Alloy
CrN Films Deposited by Middle Frequency Magnetron Sputtering
Low Cost Vibrometer Utilizing Laser Diode Self-Mixing with Sound Card Controlled by LabVIEW
Effect of Saccharin Addition on the Electrodeposition of Nickel from a Watts-Type Electrolyte
The Micro-Mechanical Behavior of Inclusions under Tensile Load in X80 Pipeline Steel
Effect of Cold-Rolled Process Parameters on Deep-Drawing Performance of Micro-Carbon Steel
Study on Low Temperature Deposition of TiN Films and their Tribological Properties
Influence of Voltage Parameters on Formation Process of MAO Ceramic Coating on Aluminum Alloy
The Evaluation of NHW-1 Type Coated Tubing Abrasion Resistance Performance
Effect of Equal Channel Angular Pressing on Microstructure and Dislocation Strengthening of 3003Al Ingot
Design of the Range-Measurement System for Mobile Robots Based on ARM
Numerical Simulation of Impact Process of Coal and Gangue
Errosion-Corrosion Critical Performance of Surface Nanocrystalline 20 Carbon Steel in Condensate Water
Corrosion Behavior Research of Fe₃Al Intermetallic Compound in H₂S/CO₂ Environment
Study on the Structure of Grind-Hardened Layer and Parameter of Hardening Depth of 42CrMo Steel
Study on Rollers’ Angular Velocity Matching of Rolling Driven Equal Channel Angular Deformation Technology
Friction/Wear Behaviors of Magnetron Sputtered TiB₂-C Composite Films on Ti6Al4V Alloy Substrate
Research on Anti-Cracking Performance of Polypropylene Fiber Reinforced Cement Mortar
Thermoelastic Contact Analysis of Functionally Graded Materials with Properties Varying Exponentially
Research on Droplet Transfer of MIG Welding with Alternating Longitudinal Magnetic Field
Kinematic Analysis and Optimization Design of an Eccentric Crank Slide-Block Mechanism Based on ADAMS
Properties of Anodic Coatings Obtained in an Organic, Environmental Electrolyte by Micro Arc Oxidation on Magnesium Alloy
Evaluation on Cleaning Effect of Cleaning Cloths for LCD Screen Using Principal Component Analysis
Mechanical Properties of Flip-Chip Solder Joints Effected by Electromigration
Explosive Compaction-Coating Manufacture Large Area Coat
Structure and Properties of Superfine Coating on Cast Steel by Electro-Spark Deposition
Properties and Synthesis of α-Fe₂O₃/SiO₂ Composite Color
Thermal-Field Experimental Study of a Thin Circular Carbon-Fiber Tube in Stratosphere Environment
Effects of Thermal Exposure on Mechanical Properties of Al-4.87Cu-1.2Mg-1.0Ag Alloy
HRTEM Investigation of Precipitates in Al-Zn-In-Mg-Ti-Ce Anode Alloy
Improvement of Tribological Behavior of Biomedical Nanostructured Titanium by Magnetron Sputtered SiC Films
Study and Application of Cemented Carbide Coating Technology
Synthesis, Characterization and Antimicrobial Activity of a New Preservative, 6-O-Chitosan Ester of P-Hydroxybenzoic Acid
Study on the Complex Strengthening Processes of 5Cr2NiMoVSi Steel Large Hot Forging Dies
Numerical Research for the Film Surface Wave with the Different Flow Case
The Online Assessment Method of Tower Crane Effective Life Based on Tower Crane Group Monitoring System
Friction and Wear Properties of W,Mo,Co Alloyed Layer on T8 Steel by Double-Glow Technique
The Effect of Nano-TiO₂ on the Performance of the Solar Heat-Reflective Coating
Diffusion Study of Al-8%Si Alloy Double-Coating on Steel
Influence on Tribology Characteristic of the Steel-Cast Iron Friction Pair under Different Concentration of the Self-Repairing Additive and Mechanism Analyzing
Tribological Performance of TiAl Based Alloy Treated with Plasma Surface Chromizing Process
The Influence of Plating Temperature on the Properties of Electroless Ni-Cu-P Alloys on Aluminum
Photo-Aging of Polyurethane Coating Based on TDI-TMP and N3390
Properties of Ceramic Coatings on the Wall of Coke Oven
Different Curing Agents on the Photoaging of Polyurethane Coatings
Effect of Frequency on Composition and Microstructure of Siliconized Layer Using Pulse Electrodeposition
Study on Characteristics of Acoustic Emission Property in the Normal Concrete Fracture Test
Research on Random Stress Spectrum for Cumulative Fatigue of Crane Metal Structure
Effect of Molecular Weight on Phase Diagram of Epoxy/Polyetherimide-Siloxane Blends
Experimental Study on Mechanical Properties of Rubber Used for Damping Bearing
Prediction of Ferrite Transformation in Nb-Containing Microalloyed Steels during Continuous Cooling
Study on the Effect of Ultrasonic Waves on the Low Temperature Electroless Ni-P Plating on Copper Substrate
Effect of Normalizing Pre-Treatment on Microstructure of Laser Hardened Ductile Iron
Surface Treatment of Magnesia-Calcia Firebricks with CO₂
Anticorrosive Films Prepared by Incorporating Permanganate Modified Carbon Nanotubes into Waterborne Polyurethane Polymer
Experimental Study of Activation the Reactivity of Waste Mortar
Influence of Mn Doping on the Microstructure and Optical Properties of ZnS Nanocrystals
Impact Abrasive Wear Resistance of High-Chromium Cast Iron Bars Reinforced Hadfield Steel Matrix Composite
Study for Vibration Measurement and Failure Diagnostics System for CNC Milling Machines Based on LabVIEW
Research on Optic Fiber Coatings and Curing Process Monitoring of Composites Based on FBG
Fault Analysis on Crosshead Fracture of the Reciprocating Piston Compressor C102B
Effects of Nd on Microstructure and Properties of Spray Deposited Mg-Al-Zn Alloy
Research on Anti-Erosion Mechanical Properties of Steel Structure Coating
Enhanced Wear Resistance of Al-15Si and ZK60-1Y Mg Alloys Induced by High Current Pulsed Electron Beam Treatment
Flame Retardant Polyamide 6 Composites Using NMH or NMH/MCA/APP
Effects of the Welding Process on Mechanical Properties and Corrosion Resistance of 2205 Duplex Stainless Steel
Research on the Mathematical Model for the Price Regulation of Power Demand-Side
Effect of Carbon Nanotubes Content on the Structure and Photo-Oxidation Behaviors of Polypropylene
Effect of Preheating Temperature on the Cooling Curves of BW Quenching Media
Study of Stress in TiO₂ Films Grown by Electron-Beam Evaporation
Modification of the Flax Fiber with Acetylation
Research on Mechanism of Polymer Inhibiting Secondary Reaction in Clinker Leaching Process
Study on the Corrosion Resistance and Wear Resistance of Micro-Arc Oxidation Coatings on the Clad Plate of Aluminum and Magnesium Alloy
Calibration Methods of an On-Line Inspection System on a Large-Scale Turning-Milling Machining Center
Influence of Annealing Temperature on the Antibacterial Activities and Photoactivity of N-Doped TiO₂ Films by Ion Beam Assistance
A Kind of Non-Contact Measurement System for Areal Surface Texture
Study on the Brush Plating Technology of GH34 Heat-Resisting Steels
Evolution of Crystalline Phase and Morphology of the Products Formed during the Hydrothermal Synthesis of Y₂O₃ Powders
Study on Micro-Arc Oxidation Composite Ceramic Coating Properties in the Textile Machinery Spare Parts
The Corrosion Mechanism of Zn-5%Al-0.3%Mg Coating
Comparative Study of Friction and Wear Behavior of Diamond-Like Carbon Coating under Various Lubricants
Process, Microstructure and Properties of Plasma-Sprayed Ceramic Coating on AZ91D Magnesium Alloy
Design of Scanning Micro-Arc Oxidation Forming Ceramic Coatings on 2024 Aluminium Alloy
Research on Surface Metallization of Carbon Fiber Based on Electroless Plating
The Design of CNC System on the Electron Beam Welder
Tribology of Plasma Sprayed Al₂O₃-13%TiO₂ on AZ91D Magnesium Alloy
Study on Electron Beam Alloying Micro-Structure and Wear Performance of 3Cr2W8V
Studies on Mechanical Properties of Thin-Walled MHS Structure
Study on the Prediction of Surface Roughness of ZTA Ceramics under Ultrasonic Assisted Grinding
Study on Milling Gray Cast Iron Using PCBN Indexable Face Milling Tools
Experimental Research on the Sound Insulation Property of Lightweight Composite Paper Honeycomb Core Wallboard
Preparation and Electrical Properties of Aligned Carbon Nanotubes/Epoxy Resin Composites Induced by a Low Magnetic Field
Preparation of Wood-Based EMI Shielding Composite via a Short Process Electroless Plating
Stochastic Finite Element Method for Nonlinear Dynamic Problem with Random Parameters
Research on Fault Diagnosis and Application for Rolling Element Bearing Based on Fuzzy Analysis
Preparation of the Layer-by-Layer Deposited Silver Nanoparticles Multilayer Films on Poly(ethylene Terephalate) Substrate
High Stable Mechanism Design for Micro-Wire Transport System in WEDM
Research on the Temperature Field and Roast Mechanism of Blast Furnace Tap-Hole Clay
Surface Roughness Prediction in End Milling of Machinable Glass Ceramic and Optimization by Response Surface Methodology
Observation of Capillaries after Implanting Porous Silk Fibroin Films in Rats
Microstructure and Creep Properties of Casting Mg-8Al-0.3Mn Alloy Containing Ca and Sr
Optimization of Process Parameters on Ti-6Al-4V Using Central Composite Design Method
Press Forging of Thin-Walled AZ31 Magnesium-Alloy Components
2 Modeling, Analysis and Simulation
Topological Synthesis of Fully Decoupled Parallel Manipulators by Screw Formulation of Jacobian Matrix
RDX Kinetic Model Evaluation by Nth Order Kinetic Algorithms and Model Simulations
Thermal Stability Determination, Anti-Biodegradation, and Thermal Degradation of Nitrocellulose with Various Nitrogen Content by DSC and FT-IR
Phase-Field Simulation of Double Dendritic Growth in Solidification of Binary Alloy with Forced Convection
The Wavelet Analysis and Processing of Weak Vibration Signal
Preparation and Stress Calculation Analysis of Light Elastic-Plastic Material
Finite Element Simulation of Residual Stress in Heavy Rail
The Determination of Using Limiting Clearance between Crank Pin and Bearing Bush in Volkswagen
Direct Electro-Magnetic Mechanical Analysis of U-Shape Coil
Numerical Analysis of Micro-Mixing in Rough Microchannels
Study on Hot Deformation Behavior and Processing Maps of Cu-0.35Cr-0.15Zr Alloy
Influence of Parameter Identification of Anisotropic Yield Function on Spring-Back Prediction in Finite Element Simulation of Sheet Metal Forming Process
Structural Optimization of Ground Vias for 3D ICs
The Numerical Simulation of Directional Solidification Process Temperature Field for Large-Scale Frustum of a Cone Ingot
SVR-Based Predictive Model for Purity of the Mg-Al-Hydrotalcite
Optimal Design of Automotive Steering Column Bearing by Simulated Annealing Algorithm
Numerical Study of Defect Free Elbows Subjected to In-Plane Bending Moment
Design Thermal Structure of Aluminum Plate LED
Temperature Rise and Heat Transfer in High Speed Machining: FEM Modeling and Experimental Validation
Determination of Mechanical Behavior of AA5083 Alloy under Machining Conditions, Applicable in Metal Cutting Simulation
Fatigue Reliability Analysis of Pressure-Reducing Valve
Numerical Simulation of Intermediate Frequency Induced Heating Steel Plate with Finite Element Method
Study of Contact Temperature in Polishing Surfaces
Impact of Float Loss on the Project Costs
Effect of Surface Roughness on Slip Resistance of Rubber
A Novel Ultrasonic Motor Driver Based on Two Phase PWM Signals
Prediction of Processing Parameters of Laser Clad TiC/NiCrBSiC Coatings on Ti6Al4V by Finite Element Analysis
3D FEM Modeling of Ball End Milling of HSM H13 Die Steel with Cutter Inclination
The Deformation Analysis for Flank Milling of Thin-Walled Rectangle Plate Based on Flexible Force Model
An Hybrid Expert Fault Diagnosis System for CNC System
The Parametric Design of the External Transmission of Involute Beveloid Gear with Parallel Axes
Virtual Measurement of Machining Errors Based on Comparison Method of Three Models
Head Surface Reconstruction and Correction of Reverse Engineering Based on CATIA's
Finite Cylindrical Shell Element Method which Analyses Local Stability of Buried Stiffened-Penstock
Bio-Oil Production from Agricultural Residues in Northeast of Thailand by Fast Pyrolysis Technology
Research on Complex Product Design Method Based on Knowledge Model-Driven
The Control and Dynamical Analysis on Magnetic Bearing Flexible Rotor System Combining the Whirling with Swing
Application of Virtual Design and Manufacturing Techniques in Large Mine Elevator
Simulation and Design for Laser Protective Structures of Aluminum Material
Numerical Modeling of the Thermal Performance of 3D SiP with TSV
Numerical Analysis of Thermally-Induced Residual Stresses in Plasma Facing Components for Fusion Reactor
Research on Influence of Longitudinal Gradient to Rigid Base Composite Road of Cross River (Sea) Tunnel under Large Longitudinal Slope
A Multiple View Assembly Process Representation Based on Three Dimensional Models
Water Vapor Cooling Effects in Turning by Finite Element Modeling
Piston Stroke Design Optimization for Linear Compressor
Radiative Transfer Modeling and Monte Carlo Simulating of a New Digital Airborne Camera
Study on Friction Wear Properties of Vanadium-Chromium Surface Composite Layer under Dry Sliding Condition
Analytically Study the Ferrohydrostatic Pressure with FHD Bernoulli Theory
CFD-Based Multicomponent Model for Solidification of Casting Process
Theoretical Study of the Effect of (F, Li) Codoping on P-Type Tendency in ZnO
Transient Heat Conduction in Functionally Graded Materials by LT-MFS
The Thermal-Mechanical Coupled FEM Analysis on 3-Roll Continual Tube Rolling PQF Deformation Process
Influence of Process Parameters on Plastic Injection Molding of Automobile Interior Trim
An Image-Based Microscale Simulation of Thermal Residual Stresses in DSE Oxide Ceramic Composite
Study on the Vertical Extrusion Process of Ultra-Thick Seamless Steel Pipe
Numerical Analysis and Experimental Study on Dipper Handle of W1002 Excavator
Analysis about Vibration and Noise of Ceramic Electrical Spindle
Research on the New Compound Technology of Integral Seamless Housing of Rear Axle
Simulating Design of Magnetic Fluids Lubricating Unit Structure with Porous Material
Simulation on Pipe Joints Expansion Technology of NiTiNb Shape Memory Alloy
Finite Element Analysis for the Wind Resistance of the Tower of Wind Turbine
Study on Process Concentrating of a Certain Limonite Ore in Xinjiang
Modeling of Anchors in Gravel Formation Using Discrete Element Method
High Air Pressure in MQL Deep Hole Drilling Workpiece Temperature
Modelling the Grain Pattern and Orientation in Radiata Pine Boards
Modelling Knot Architecture in Radiata Pine Logs and Boards
On Resistance Calculation for Autonomous Underwater Vehicles
Modeling of Aluminum Extrusion Process Using Non-Orthogonal Block Structured Grids Based FVM
Effect of Rare Earth on Microstructure and Impact Toughness of Low Carbon Steel Based on Compact Strip Production Process
Effects of Heating Vents in a Tunnel-Type Dryer
The Effects of ZigBee Position with Different Hidden Layers in Back-Propagation Neural Network
Surface Grinding Force Model of Steel 55 Based on Undeformed Chip Thickness with CBN Electroplated Wheels
Spatial Cam Modeling and Analysis on Curvature of Conjugated Surfaces
Influence of Heating Models on Necking Deformation during Tube Extrusion Process
Experiment and Numerical Study of Annular Flow Entrainment Mechanism in Oil-Air Lubrication Pipe
Modeling and Analysis of Soft Contact in Robotic Grasping Using Bond Graph Methods
Dynamic Contact Analysis of the Offset Face Gear
Mechanical Properties of Commercially Pure Titanium during Hot Compression
The Wave-Load Analysis of the Offshore Wind Power Installation Vessel Based on Frequency-Domain Methods
Study on Controlled Release Properties of Slow-Release Pellets
Study on Angular Stiffness of Monolithic Flexible Joint
Analysis of Mechanical Properties of Pipes with Helical Reinforcement under Axial Tension
Application of the Arbitrary Lagrangian Eulerian Formalism to Stationary Roll Forming Simulations
Study on the Distribution Law of the Crashed Coal Fragmentation
Numerical Analysis on Impact Load of Elasto-Plastic Spherical Impact
Anslysis of the 5-m Heavy Plate Mill Stand Based on MSC.Marc Finite Element Method
Temperature Simulation in High-Speed Grinding by Using Deform-3D
Application of Support Vector Machine to Predicting Mechanical Properties of TC4
The Research on Friction Impacting on Drawing High-Strength Steel
Laser Anneal-Induced Effects on the NBTI Degradation of Advanced-Process 45nm High-K PMOS
Research on Performance Characteristic of Novel Fomichev Plug Used in Julong-Type Piercer
Study on the Burning Characteristics of Poor-Quality Anthracite in Supercritical W-Shaped Flame Boiler
Optimization Technique for Neural Network-Based Error Compensation in CNC Machining
Virtual Prototype Design and Dynamic Simulation of High-Dump Truck Based on ADAMS
Corrected Diffusion Model of Chloride in Concrete and its Engineering Application
The Thermal Response Investigation of Functionally Graded Material Plates
Coupled-Field Analysis of the Compliant Slider Mechanism with Rectangle Flexure Hinges Based on ANSYS
Influence of Guide Disc Postposition on Rolling Process of Accu-Roll Mill
Finite Element Analysis of RPC-Filled Steel Tube Stub Columns
Fatigue Analysis of Planet Carrier Based on Collaborative Simulation
Power Flow and Energy Sharing between an Oscillator and a Continuous Receiver Structure
Wear Mechanisms Approach to Ni-P Electroless Plating Applied to Hardening Engine Cylinder
Numerical Simulation of Different Clamping Modes on Stretch Forming Parts
3D Finite Element Modeling of the Machining of Ti6Al4V Alloys
Identification Algorithm for Instantaneous Engaged Cutting Edge Elements in Five-Axis Milling
Study on Metal Flow in Continuous Extrusion Cladding of Cable Aluminum Sheath Using FEM Analysis
Numerical Simulation of Polymer Flows in Coat-Hanger Die Using Wagner Constitutive Model
Numerical Simulation of Effect of Slip Conditions on PVC Co-Rotating Twin-Screw Extrusion
Mathematical Modeling and Modifying of Turntable’s Angle for 5/12 Automatic Numerical Controlling Bending Hoop Machine
Research on the Stress and Strain Field and Wall Thickness in Power Spinning of Ellipsoidal Heads with Variable Thickness
Contact Deformation and Abrasion Analysis of the Contact Region for Roller Linear Guide
Research of New Type PAN-Based Carbon Fiber Pre-Oxidization Furnace and its Temperature Controlling Property
Application of Digital Close Range Photogrammetry in Mechanical Three-Dimensional Modeling
Analysis on Combination of Different Wavelengths in Surface Roughness Measurement by Polychromatic Laser Speckle Patterns
Optimum Design Study of a Hydraulic Pressure Derrick Based on Stability
Temperature Field Modeling and Thermal Deformation Analysis of Turning and Milling Machining Center
3D FE Modeling of Three Rolls Cross Rolling Process of a Rotary Disk Part
Numerical Simulation of Flow Field in Cavitations-Impinging Stream Reactor
Simulation of Reflective Crack Propagation Path in Asphalt Overlay under the Partial Wheel Load
Temperature Stress Field Distribution Study of Asphalt Carrier’S Based on Rockwool Damaged
Numerical Analysis and Experimental Study on Temperature Field of Brake Disc during the Air-Cooling Process
A Numerical Study on the Uplift Behavior of Under-Reamed Anchors in Silty Sand
Modeling and Simulation of Gear Transmission System of Drive Axle with Romax
Design and Analyses of Roof Structure in Hangzhou Grand Theater
The Simulation of Polycrystalline Silicon Thin Film Deposition in PECVD System
New Geometry of Face-Gear with Curvilinear Shaped Teeth and Non-Zero Spiral Angle: Machining Mathematical Model Analysis and Simulation
Improving Pattern Recognition Rate by Gaussian Hopfield Neural Network
Calculation and Analysis on the Key Parameters of High-Speed Linear Motor Feed System
Optimization Design of Ride Comfort for Wind Blade Transporter
Numerical Analysis of Coupled Finite Element with Meshfree in Bulging Process of Sheet Elastic Flexible-Die Forming
Study on Thermal Stresses of Cylinder Liner’s Fabrication Using FEM Analysis
Space Robot Self-Assembling Dynamics and Control
Modal Analysis of Self-Repairing Composite Gear Based on ANSYS
Computer Simulation of Fracture Damage for Large-Diameter Percussive Drill
Residual Stresses Distribution Calculation of the Cu-Cr-Zr Alloy Contact Wire Used in High-Speed Electrical Railway
Minimizing the Warpage and Sink Mark Depth in Injection-Molded Thermoplastics
Numerical Study on the Large Deformation of Silicone Rubber Foams Based on Random Cell Models
Axial Spread Evolution during Hot Rolling of Large Rings with Different Sizes
The Numerical Simulation about Second Dendrite Spacing of Low Pressure Casting Automobile Aluminum Magnesium Alloy Wheel
Nonlinear Fitting Technology of 7-Parameter Cross-WLF Viscosity Model
Analysis for Effect of Key Parts on Precision of High Precision Machine Center
Study on Ultrasonic Surface Rolling Process Using FEM Analysis
Optimal Clamping Scheme of Thin-Walled Cavity Workpiece
Integrated Simulation of Injection Molding Process and Mold Deformation Using the Uniform Mesh
Solder Joints Reliability Assessment for Stacked CSP Module Based on Flexible Circuit Printed Board
The Overview of Modeling the Thermo-Mechanical Three Dimensional Friction Stir Welding Process
Mechanism Analysis of Magnetostrictive Turning for Piston Skirt Processing
Modeling of Pillowing Stress in Corroded Lap Joints
Investigation on the Numerical Simulation of Hot Stamping of Advanced High Strength Steels
Advanced Interactive Device in Virtual Knee Arthroscopic Surgery
Optimization Research on Workpiece Clamping Deformation Using Genetic Algorithm and Finite Element Method
Finite Element Analysis on Contact of Wheel and High Manganese Steel Crossing
Research on Rapid Prototyping Machine of Ceramic Parts and the Machine Control System
Design of New Hydraulic Lifts for Construction Machinery Assembly
3D Finite Element Modeling for Particle-Reinforced Polymer Composites for Wind Energy Application
The Numerical Simulation of the Water Jet in Hydroentanglement
Study on Electrical Resistance Tomography Simulation of Carbon Fiber Smart Layers on Two-Dimensional Curved Surface
Discrete Jerk-Limited Feedrate Planning for NURBS Curves Interpolation
Numerical Simulation Analysis of Deformation in TIG Welding of I-Steel
Cellular Automata Simulation of Grain Growth under Consideration of Zener Pinning
Expansion Order Effect on Residual Contact Pressure of Tube to Tubesheet Joint by Hydraulic Expansion
The Estimation of TP Chromatic Aberration by Using Neural Network
Analysis on Internal Gear Stress for Design Parameters
Virtual Simulation of Embedded-Vane Rotary Compressor
CAD Design and Mechanical Test on inside Porous Parts
Numerical Simulation of Plate Bender Bending Process
The Static and Dynamic Characteristics Study of Aluminum Tank Semitrailer
Research on Thermal Error Modeling and Simulation Technique of CNC Based on Stepped Approximation Method
The Definition and Solution to the Correlation in District Collaborative Design
Discussion on Convergence Issues in ABAQUS/Standard while Carrying Out Damage and Fracture Analysis
Study on the Effects of the Geometrical Parameter of Twist Drill on the Drilling Performance of Stainless Steel
Flow of Finite Element Analysis of Metal Powder in Medal Injection Mold Runner
Three-Dimensional Finite Element Analysis in Cutting Temperature for High Speed Milling of Titanium Alloys
Research on Dynamic Fatigue Strength Criterion of BTA Deep Hole Boring Bar for Consideration Vortex Surrounded by Internal and External Cutting Fluid
Study on Thermal Placement Optimization of Embedded MCM
Determination of Flow Stress Based on Cutting Simulation and Optimization
Study on the Mechanism of the Impactor-Bit-Rock Interaction Using 3D FEM Analysis
Flow Features Analysis of Throttle Notches of Proportional Direct Valve
Dependence of Structural Stress on Indium Bump Sizes in 8×8 InSb Focal Plane Array
A Method of the Inverse Evaluation for Heat Transfer Coefficient between Al-Cu Alloys and Cooling Water
Simulation of Multiscale Time and Space in Fracture Process of Three-Point-Bending Concrete Beam with Offset Notch
Debonding Analysis between FRP-Concrete Interface with a Linear Elastic Fracture Mechanics Approach
Error Analysis of Ladder Shaft Turning and the Research of NC Compensation
Study of Precision Formation on New Synchronizing Ring of Heavy-Duty Truck Based on Computer Numerical Simulation
Numerical Simulation Analysis of Spinning Forming Process of Tubeless Steel Wheel on Technical Parameters
Numerical Optimization Design on the Parameters of Double Ellipsoid Welding Heat Source
Limit Bearing Capacity Analysis of Structure System with Different Types of Element Using Elastic Modulus Reduction Method
Research on Classification Method of Multi-Circuit Pump Critical Parts Based on Fuzzy Theory
Experimental Analysis and Performance Evaluation of Fu Feng Highway Prestressed Concrete Bridge after Strengthening in China
Theoretical Analysis of Designed Internal Forces of Jiamusi Highway Prestressed Concrete Bridge before Strengthening in China
Numerical Simulation of the Viscous Flow for the Supersonic Jet Element
Calculation of Static Safety Coefficient about Loess Cave
Optimal Design of Plastic Injection Mould Gating System
Analysis of Metal Flow and Deformation Features during Continuous Tube Rolling Process with Mandrel Mill
Influence of Wall Thickness Fluctuation of Pierced Shell on Continuous Tube Rolling Process of Semi-Floating Mandrel Mill
Elastic-Plasticity Analyze of Bending Deflection on Profiled Bar Roller Straightening
Multi-Dimensional Numerical Simulation of Emission Characteristics in DI Diesel Engine
Numeral Simulation of a New Forming Process: Stretch Forming Combined with Roll Forming
The Study of the Model for the Formation Process of GMAW
Influence of Turbulence Controller on Flow Mode of Molten Steel in Tundish
Study on Creep Deformation of Reactor Coolant Pump Rotor-Can during Vacuum Hot Bulge Forming Process
Imitative Farmland Random Vibration Analysis on Frame of Blueberry Harvesters
Numerical Modelling of Shape Evolution of Tubular Preform in Spray Forming Process
Research on the Application of Expansion Ratio Analysis for Die-Face Optimal Design in Sheet Metal Forming
3 Materials Forming
Mechanism for In Situ Iron Nanoparticles Formed during Copper Alloy Solidification
The Synthesis of Mg-Zn-Al LDH and the Sustained-Release Properties of Theophylline Intercalated LDH
Investigation of Coupling Efficiency by Plastic Deformation of Tube Packaging for Thin-Film-Based Passive Optical Components
Microstructures Development in Al-5Fe and Al-5Fe-3Y Alloys Solidified at Different Cooling Rate
Virtual Disassembly Simulation of Varying Target Component for Complex Products
Explosive Compaction of Metallic Glass Particles Reinforced Aluminium Matrix Composites
Investigation of Mold Temperature Affecting on Shrinkage of Rapid Heat Cycle Molding Plastic Part
Design Milling Parameters Optimization System Based on Thin-Walled Parts
Study on Machinability and Polishing Performance of 1CrMn2MoVTiB Non-Quenched and Tempered Plastic Mould Steel
Analysis for Fracture Behavior of Compactor Grinding Tooth Forging Die Based on Finite Element Method
Influence of Segmented Blank Holder for Rectangular Box Drawing
Consolidation of HLW into Mineral-Like Materials by the SHS
Superplasticity-Like Behavior, Microstructures and Deformation Mechanism Map in Superlight Mg-6Li-3Zn Alloy
An Upper-Bound Analysis of Closed Multi-Ram Forging of Rod
Application of Advanced Cooling Control System for Plate Mill
Research on Flow Stress of Magnesium Alloy Sheet under Warm and High Strain Rate Forming Condition
Injection Mould Parametric Reusable 3D Parts Libraries of Development
Maintenance Process Simulation Model Considered Sharing Resource and its Application
Numerical Simulation on Thixo-Forging of Magnesium Matrix Composite
Numerical Simulation and Experimental Study of Limit Drawing Ratio of Steel Sheets
Survey and Trend of Rapid Heat Cycle Molding
Effect of Position between Upper Die and Workpiece on Cold Rotary Forging
Optimal Design of the Guide Mechanism of Vertical Ring Rolling Mill
Influence of Cross Section Shapes of Preformed Blade Body for Final Forging Formability Based on Numerical Simulation
The Model of Thermal Deformation Resistance for P20 Steel
Analysis and Control of Car Door Inner Panel Forming Fracture Based on Experience Knowledge and Numerical Simulation
PSO Algorithm Based Task Allocation in Dynamic Virtual Enterprise
Research on Workshop Scheduling of SMT Product Manufacturing System
Development of an Indirect Solid Freeform Fabrication Process Based on Stereolithography and Gelcasting for Ceramic Casting Molds
Effect of Drive Roll Rotation Speed on Ring Rolling Process
Stray Light Elimination Methods for Laser Communication System with Submarine
COF Measurement of Tubes by Hydraulic Bulging with Radial Crushing
Test and Analysis of Friction Torque for Wind Turbine Pitch Bearing
Numerical Simulation of Microstructure Evolution of Hot Forging
Microstructure of AZ31 Magnesium Alloy Produced by the CONFORM Process under Different Extrusion Wheel Velocities
The Mechanism and Influence Factors of Struvite Precipitation for the Removal of Ammonium Nitrogen
Real-Time Data-Based Fault Diagnosis System
Study of Solutions and Causes for Scrap Jumping up in High-Speed Stamping
Diagnosis System of Manufacturing Equipment Based on Structure-Fault Tree
Finite Element Simulation and Experimental Study of the Effect of Cone Parameter on Thickness Distribution in Hydroforming of Conical-Cylindrical Cups
Test Research of Stamping Property for 500MPa Grade Super Steel Sheet
Study on the Large Module Spur Gear Cold Forming Process by Means of Numerical Simulation
Punch Die of 385 Diesel Part Design Based on CAE Technology
Blank Thickness Effects on Rolling Force in Hot Rolling of Titanium Alloy Large Rings
Finite Element Analysis of Bulging Forming for Sheet Metal with Bottom Compression Drawing Method
The Decomposition Mechanism of Titania Film with Nanotube Structure
A Fault Diagnosis of Suck Rod Pumping System Based on Wavelet Packet and RBF Network
Thickness Indirect Measurement Method for Direct Pulling Pilot Cold Rolling Mill
The Investigation of Multi-Stage Sheet Metal Stamping Process for Deep Drawing
Study on Regulation of Rotation Speeds and Tangent Slip in Radial-Axial Ring Rolling Process
A New Axial Upsetting Process for Large Ingots with Large Ratio of Height to Diameter
Influences of Material Thickness on Hole-Flange Forming Limitation
Preparation and Characteristics of Expanded Graphite
Function Analysis of Injection Molding
Analysis of Draw Bead Geometry on Wall Thinning and Concave/Convex Feature in Rectangular Deep Drawn Parts
Microstructure and IR Studies of Ag Ions-Zeolite
Design of Drawing Compound Die for Side Hole Part
Research of Numerical Simulation Method in Two Pass Deep Drawing Forming of Sheet Metal
Predict and Analysis of Fold in Steering Knuckle Forging Based on Numerical Simulation
Design and Realization of Automatic Testing System for Hydraulic Pump
Novel Carbon Source in Manufacture of LiFePO₄/C
Analysis and Study of Damage of Forging Cracks
Research on Ball Spinning Forming of Superalloy Inconel 718 Thin-Walled Tube
A New Hybrid Particle Swarm Optimization for Solving Flow Shop Scheduling Problem with Fuzzy due Date
Processing Parameters Optimization for Stagger Spinning of Trapezoidal Inner Gear
An Artificial Immune Algorithm Based Intelligent Monitoring System in Grinding Process
A New Flaw Identification Model of Ultrasonic Signals Based on EMD and Possibility SVM
Numerical Simulation and Process Optimization for Multi-Stage Forming of Wheel Centre Disc
Warm Compacting Behavior of Pure Titanium Powders
Research on Warm-Cold Precision Forging Process and Numerical Simulation for Spherical Housing
Effect of Geometry Parameters on Cross-Sectional Distortion of Thin-Walled Rectangular Tube in Rotary-Draw Bending Process
The Study of Parameters on CK67 Steel Sheet Spring-Back in L-Dies Bending Processes
A Single Stage Hot Forging Process of Alternator Poles
Effects of Preform on Thickness Distribution of Hydroformed Y-Shaped Tube
An On-Line Multiparametric Water Quality Monitoring System Based on Visible Spectrophotometry
Finite Element Analysis for the Influence of the Clamping Holder Corner on the Bulging of Thin Metal Shells
LY11 Alloy Flat Bar Produced by Continuous Semisolid Extruding Extending Forming Process
Control on Head Displacement of H-Beam in Rolling Process
The Experimental Study on the Microstructure of SS400 Steel with Traveling Magnetic Induced Rapid Tempering Process
Grain Refinement in Constrained Groove Pressing of 7050 Aluminum Alloy
Effect of Magnetic Field on Air Film Continuous Casting
Study on Cold Extrusion Process and Die for Vehicle Sleeve Gear with Spline
Effect of Severe Plastic Deformation on the Characteristics of a PM Aluminum Alloy
The System Design of Spiral Drum Based on Parameterized Modules
A Study on Dynamic Recrystallization Behaviours of AZ80 Magnesium Alloy
Blank Optimization of Sheet Metal Forming Based on Response Surface Methodology
Embedded Web-Based Remote Monitoring System of the Motor
Study on Metallography and Properties of WC Cast-Infiltration on Carbon Steel Surface by Expendable Pattern Casting
An Investigation on Effect of Residual Stress on Springback Behavior of High Strength Steel in U-Bending Process
Effect of Rare Earth (RE) La on Solid Solution of Second Phase Particle and Austenite Grain Growth in Steel Containing High Niobium
Research on a Compiler for NC System Based on PC
The Analysis of Core Shift in Injection Mold and its Optimization Based on AMI
Thickness Distribution in Conical Parts Formed by Hydroforming and Conventional Multistage Deep Drawing Processes
Investigation on the Elongation of Tailor Welded Blanks with Different Thickness
Numerical Simulation of Deep-Drawing Processes of Square Cup under Bilateral Constrained Conditions
The Effect of Purity of Zirconium Material on Mechanical Properties and Microstructure of Zr-Based Bulk Metallic Glass
Experimental Study of Hot Extrusion Micro Gear of Brass H62
CAD Software Development for the Continuous Flexible Forming Process
Numerical Simulation and Verification of Multi-Operation Sheet Forming Process for Stamping Parts of Spiral Step Surface
Co-Deposition of Binary Particles during Slip Casting Process
Effects of Continuous Extrusion on Microstructure Evolution and Property Characteristics of Brass Alloy
Consititutive Modeling for Auto-Body Steel Sheet Incorporating Strain Rate and Temperature
The Desing and Research of the Interior Sprue Gate of Die-Casting Mould
Study on Direct Hot Isostatic Pressing Technology for Superalloy Inconel 625
Effect of Molding Parameters on the Interface Morphology of Metal Co-Injection Molding
Fabrication and Bending Strength of Al/SiC Composites with High Volume Fraction of Reinforcement by Combining Powder Injection Molding and Pressure Infiltration
Development of Experimental Method to Improve Sheet Metal Formability by Transverse Normal Stress
Study on Springback Compensation in Multi-Point Forming
A New Type Multi-Mode Linear Ultrasonic Motor
Effect of the Thickness Ratio on the Failure Modes of Tailor Welded Blanks
Study on the Metal Flow in Power Spinning Process of Parts with Transverse Inner Rib
Thickness Demarcation Circle of Double-Cone Tube during Hydroforming
Analysis of Strip Shape in Cold Rolling of Thin Strip
Cell Direct Assembly Technology Adopting Hybrid of Gelatin-Based Hydrogels
Numerical Simulation on Efficient Spinning Technology Based on Multi-Point Adjusting Principle
Determination of Optimal Microminiature Powder Injection Molding Parameters by Taguchi Approach
Investigation of High Strength Steel for Automotive Roll-Forming Parts
Influence of Operation Conditions and Ambient Temperature on Performance of Gas Turbine Power Plant
4 Materials Machining
The Research of a Drill Bit for Underground Casing Drilling in Radial Water Jet Penetration Perforation
Investigation of Airflow Field in Grinding Zone Based on FLUENT
Experimental Research on the Dry Electrostatic Cooling Assisted Machining for Hardened Steel
Drawing Properties of Modified Polyamide 6 Fibers
Contrast Studies on the Solar Drying Schemes of Eucalypt Timber
Tool-Path Generation for Conical Groove of Cylindrical Cams by Small-Sized Cutting Tools
Tool Path Design Methods for High Efficiency Die Cavity Machining with CAD/CAM Technology
Application of Taguchi Method in the Optimization of Cutting Parameters for Turning Metal Matrix Composite
Experimental Study and Theory Prediction on Adiabatic Shear Critical Conditions of Hardened AISI 1045 Steel
Cutting Test and Analysis of the Emulsified Deep-Hole Cutting Fluid
MQL Technology Including the BTA Deep Hole Drilling Machining
The Effect of Two-Step Aging on the Electrical Properties of 7075 Aluminum Alloy
Comparative Study on Force in Milling T10 Hardened Steel with Different Machining Parameters
Influence on Cutting Forces and Vibration in High Speed Machining Pocket Corner
The Experiment Research of High-Pressured Cauldron’s Anti-Hydration
Study on Decreasing Processing Cost of Special-Shaped End Socket
Nano-Process of SiC Ceramics by Molecular Simulation
An Ultrasonic Elliptical Vibration Burnishing Process for Reducing Surface Roughness
Error Analysis and Simulation of Gear Form Grinding
Application and Development of High-Efficiency Abrasive Finishing
A Modified Isoscallop Height Toolpath Planning Method for Generating Smooth Paths Based on Curve Fitting Method
Machining Characteristics of EDM Using Gas Media
A New Effective Hybrid Optimization Strategy for Rectangular Packing Problem
Cutting Temperature and Tool Wear in Internal Spray-Cooling Vibration Drilling of Superalloys
Study of High-Speed Machining Parameters on Nickel-Based Alloy GH2132
The Analysis of High-Speed Shearing Mechanic and Cross-Section about Sheet Metal
Effect of the Surfactant Concentration on Sinking Electric Discharge Machining Performance with Water-in-Oil Emulsion as Dielectric
Study on the Deep-Hole Honing of Cavity of Oxygen-Free Copper
Research on Higher Frequency, Short Pulses and Assisted Magnetic Field Electrochemical Machining
Optimization for Tooth Profile of Assembled Cathode Based on Comsol
Development of Cutting Tools with Built-in Thin Film Thermocouple for Monitoring Machining Temperature
Research on Several Machining Processes of the up-down Abnormity Hole by WEDM
Electrochemical Micro-Drilling with Ultra-Short Pulses
Experimental Study of the Critical Process Parameters of Machining of Stainless Steels Using the Taguchi Approach
Experiment Study of Oil-Air Lubrication on Cooling of Turning Tools
Grinding Performance of Porous Diamond Wheels on Different Materials
Research on the Vibration Tapping Performance of Particle Reinforced Aluminum Matrix Composites
Study on Cutting Process of Manual SHS Cutting Technology
Wear of Uncoated HSS Tools in Drilling Difficult-to-Machine Materials with Water Vapor as Coolant and Lubricant
Study on the Size Shrinking and Shape Changing of Solid-State Nanopores
5 Welding & Joining
Ice Accretion of Glaze Loads Model on Wires of Power Transmission Lines
Study of Flux on Wetting Behavior of Sn-Zn Lead-Free Solders
Ice Accretion Cause and Mechanism of Glaze on Wires of Power Transmission Lines
Acoustic Signal Recognition Based on Time Series Model
Diffusion Bonding of ZrB₂ Ceramic and Al-Sn-Mg Alloys at Atmosphere
Microstructure and Mechanical Properties of Aluminum/Stainless Steel Joints Welded by Different Weld Heat Input
Study on Intelligent Analysis of the Causes of SMT Solder Joint Defects Based on Fuzzy Neural Network
ICAI Realization Method for Parallel Robot Instruction
Influence of Friction Stir Welding Process on the Weld Formation and Tensile Strength of Titanium and Aluminum Dissimilar Alloys Welded Joint
Analysis of the Hardness and Elastic Modulus Distribution in a High Strength Steel Welded Joint by Nanoindentation
The Thinking of Using Multimedia Technology to Improve the Quality of Mathematics Teaching
Enhancement of Load-Carrying Capacity of Undermatching Butt Joints by Weld Shape Design
Innovation for Joining by Forming of Magnesium Alloy Based on TRIZ
Application and Research on Corrosion and Scale Inhibitor WJF-6 in Seawater Circulation Cooling Water
Research and Prospects of Improving the Fatigue Life of Wleded Train Bogie Structure
Research about the Effect of Ultrasonic Impact on the Fatigue Life of Butt Weld Joint of 16MnR Steel
Study on Nonlinear Multiple Regression Modeling of Nugget Morphology for Unequal-Thickness Dissimilar Steel Welding
The Effect of Carbon Content in Filling Alloys on η Phase Formation in the Interface Zone of YG30 and Weld Bead
Inverse Analysis of Material Parameters of Multiple Foam Layers Based on Artificial Neural Network
Simulation on the Thermal Behavior in Vacuum Electron Beam Welding of Magnesium Alloy
Microstructure and Mechanical Property of (Sn-9Zn0.05Ce)xBi Solder
Monitoring of Effect of Electrode Force on Resistance Spot Weld Quality Using Electrode Displacement Method
Study on the Microstructure and Properties of Zl114a Friction Stir Welded Joint with Forced Cooling
Microstructural Characterizations of the 316 Stainless Steel-Alumina Joining by a Modified Moly-Manganese Process and Brazing
Effect of Cooling Condition on Microstructure and Mechanical Properties in Large Line Energy Welded Joints of Ultra-Fine Grained Steel
Numerical Analysis of Controlling Welding Deformation of the Wall Plate of Large Cylindrical Structure by Pre-Stress Method
Welded Joint Nonpenetration and Slag Inclusion Evaluation Based on MMM Signal Characteristic
Effect of Electrode Force Change on Spot Weld Quality of AHSS Using Servo Gun
Quality Estimation of the Resistance Spot Welding Based on Hopfield Network
Research of Surfacing Technology on Continuous Casting Roller
Effect of Welding Heat Circulation on the Microstructure and Mechanical Properties of 500MPa Ultra Fine Grained Steel in HAZ
Formation and Growth of Intermetallic Compound Layers at Interface of Solder/Copper Alloys for Lead Frame
Quasi-Static Analysis of Beam Described by Fractional Derivative Kelvin Viscoelastic Model under Lateral Load
Effects of Wire Rotating Frequency on Metal Transfer Process in Rotating Arc Narrow Gap Horizontal GMAW
Microstructures and Properties of Thick Plate Butt Joints of Al Alloy 6082 Prepared with FSW
Review of Dynamic Reliability Analysis on Wind Turbine
Research of Material Flow for Friction Stir Welding Using Smooth Pins Based on Plasticine Analog
Study on the Legs Connection Technology of Jack-up Drilling Platform
The Structure and Mechanical Properties of Turtle Shell and Biomimetic
Numerical Simulation of Punching Bonding Based on AutoForm
Stress Distribution of Bonded Joint with Rubbery Adhesives
Study on the Numerical Simulation of the Resistance Spot Welding Process of Magnesium Alloy
Study on Defect of 304 Stainless Steel Industrial Condensation Board in CO₂ Laser Welding
A Rapid Process for Fabricating Microfluidic Devices with a Low-Cost UV Curable Resin
3-D Finite Element Analysis on a Fillet Weld Sealing Joint in the High-Pressure Hydrogenation Heat Exchanger
Mechanical Properties on the Welded Connection of Pipe and Hollow Spheres Joints
Solid-State Dye-Sensitized Solar Cells Based on ZnO Nanorod Arrays by Low-Temperature Chemical Bath Deposition
Research of Thermal Anchor Attachment for ITER Magnet Supports
Effects of Ultrasonic Power on Bonding Strength of Anisotropic Conductive Film Joint in Chip-on-Glass Assembly
Prediction and Application of Welding Residual Deformation of Steel Sheets
Fabrication of Fuel Reforming Catalytic Coatings for Hydrogen Production by Cold Spray Technology
Automatic Hyperbaric Welding of Sub-Sea Pipelines Repair
Manual Self-Propagating High-Temperature Synthesis Welding of 45 Steel
Effects of Rare Earth Elements Erbium and Cerium on the Properties of Hardfacing Alloy
Vertical Vibration of Pile Groups in Soil Described by Fractional Derivative Viscoelastic Model
Improving Low-Ag Pb-Free Solder Performance by Adding Bi, Ni Elements
A Welding Method for Carbon Nanotubes to Metal
Effect of Magnetic Field on Microstructure and Properties of Magnesium Alloy Welded Joint with GTAW
The Effects of Grit Particle Size on Frictional Characteristics of Automotive Braking System
The Effect of Plate-Plate Butt Welding Stress Distribution on the Welding Deformation
Semi-Solid Stirring Brazing of SiCp/A356 Composites and Aluminum Alloy in Air
Influences of Latent Heat and Butt Gap on Temperature Field and Melting Pool Shape in Laser Brazing of Beryllium
The Effect of the Welding Thermal Cycle on Heat Affected Zone Hardening for 500MPa Grade Screw Thread Steel
Resistance Spot Welding between Aluminum Alloy and Low-Carbon Steel
Study on a Cu-Fe Weld Metal of Manual SHS Welding
Optimal Design for Fe-Cr-C Hardfacing Alloys with Anti-Wearing
Prediction and Control of Welding Distortion in "U" Rib Orthotropic Plate
An Experimental Investigation on Railway Adhesion Properties under Water Medium and Dry Condition Respectively
Nonuniformity of Mechanical Property in the Weld Zone of Friction Stir Welded 7050 Aluminum Alloy Joint
Effects of Thermo-Mechanical Control Process on the Microstructure and Properties of the Welded Joints of ERW OCTG
Effect of Linear Cutting on Corrosion Behaviors in 304 Stainless Steel
Research and Numerical Simulation of Contactor of High-Frequency Welding Device
Study of the Effect of Active Fluxes in Gas Tungsten Arc Welding
Experimental Study on the Effects of Rotational Speed and Attack Angle on High Density Polyethylene (HDPE) Friction Stir Welded Butt Joints
Preparation of Grafting Starch by HRP Catalyst and it’s Application in Leather Tanning Process
Study on the Influence of Reduction in Area on Fatigue Life of Bearing Steel Using Statistics of Extreme Values
Resistance Microwelding of Au/Ni-Plated Phosphor Bronze Sheet to Insulated Cu Wire
The Mechanical Properties of Al-30Si Alloy by Friction Stir Processing
Design of Hi3510-Based Embedded Wireless Video Monitoring System
Applications of Piezoelectric Materials
Investigation on Joining Method Replacement for Vehicle Body’s Assembly
Study on Effectiveness of Releasing Weld Residual Stress by Ultrasonic Impact Method
Calculation Method of Butt-Welded Connection of Steel Structure Post Fire
Desirability-Based Performance Optimization of Wear-Resistant Coatings by HVOF Sprayed WC-Co Experiments
On the Hardfacing Performance Optimization after Plasma Transfer Arc Experiments
Development and Analysis of Robust Anti-Wear Design of a-C:Zr Films by Taguchi Methods
Modeling Weld Formation Mechanism of Automated Submerged Horizontal Position Arc Welding
6 Laser Processing Technology
Reconstruction of Human Skeleton Model Based on Selective Laser Sintering
Effects of Powder Characteristics on Selective Laser Melting of 316L Stainless Steel Powder
Effects of the Processing Parameters on the Forming Quality of Stainless Steel Parts by Selective Laser Melting
The Effect of Heat Treatment on Mechanical Properties of Pulsed Nd:YAG Welded Thin Ti6Al4V
Investigation of Microstructure and Mechanical Properties of Pulsating Laser Cladding Coating
Study the Application of Laser Welding in the Automotive Transmission Parts
Investigation on Inconel 625 Alloy Thin-Walled Parts by Direct Laser Fabrication
Study on Microstructure and Properties of Slab Crystallizer by Laser Coaxial Cladding Strengthening
Influence of Recoating Parameters on Thickness of Resin Layer in High-Resolution Stereolithography System
Laser Cutting Layout Based on Particle Swarm Optimization and Graphic Interference Detecting
Experiment and Simulation of TC4 Alloy Rods Subject to Laser Shock Processing
Experimental Investigation on Laser Pretreatment of Optical Films
Microstructure and Corrosion Resistance of 40Cr Steel by Laser Melting
Dry Sliding Friction and Wear Behavior of WC/WC-Ni Particles Laser Cladding Reinforced by Nano TiC on Mold Steel Surface
Research on Defects of Titanium Alloy Laser Rapid Forming
Fabrication of In Situ TiC Reinforement Ti Matirx Wear-Resistant and its Wearing Performance at 500°C
Simulation of Two-Dimensional Transverse Laser Cooling of Cesium Beam from Pyramidal Magneto-Optical Trap Atom Funnel
Research on Leveling Technology of Tailored Laser Welding
Photodetection Technology Based on Laser Coding Emission
Research Progress of Laser Assisted Liquid Compound Machining
Investigated on Residual Stress Field of Aluminum Alloy 7050T7451 with Fastener Holes by Laser Shock Processing
Ablation Characteristic Analysis of Short Pulse Laser Processing Composite Materials
Characteristics of CO₂ Laser Welded TRIP Steel Sheet
Laser Cooling Mechanisms of Chromium Atomic Beam
Numerical Investigation of Dual Heating in Laser Micro-Adjustment of Actuators
Effects of Sheet Thickness on Residual Stress Distribution by Laser Shock Processing of 7050-T7451 Aluminum Alloy
7 Casting and Solidification
The Effect of Casting Speed on Sump Shape and Ingot Surface of HDC Casting 7075 Aluminum Alloy Ingot
Study of the Grain Refinement Technology by Electromagnetic Stirring for IN100 Superalloy Vacuum Investment Casting
Effects of Low Frequency Electromagnetic Field on Segregation Layer during Hot-Top Casting of Aluminium Alloy
Microstructure Formation during Unidirectionally Solidified Pb-Bi-Sn Tenary Quasi-Peritectic Alloy
Prepartion of Semisolid AM60 Alloy by Novel Self-Inoculation Method
Formation of Structure during the Nonequilibrium Solidification of Zn-5wt%Al Alloy
A Physical Explanation of Plateau in Velocity vs. Undercooling Curve Using a Undercooled Dendrite Growth Model
Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast AZ91 Magnesium Alloy
Heat Treatment and Morphology Study of Mg-Zn-Y Quasicrystal Alloys
Performance Comparison and Mechanism Analysis of Several No-Bake Sand
Metastable Phase in Undercooled Fe-Co Alloy
Preparation and Characterization of Self-Dispersal Nanometer Carbon Black Pigment
Microstructure and Microsegregation in Directionally Solidified FeCoNiCrAl High Entropy Alloy
Kiss-Point Position Control of Solidification Layer and Process Optimization for Twin-Roll Casting of Magnesium Alloys
Experimental Research on the Semi-Solid Formability of 7A09 Aluminum Alloy Impeller
Segregation of C, P and Mn in Rapid Solidified Carbon Steels
Study on Defects of A356 Aluminum Alloy Wheel
Effect of Ce₂S₃ Powder Addition on Morphology of Graphite in Cast Iron
Analyses of Interfacial Thermal Stresses for DLC/WC-Co
Simulation of Facet Dendritic Shape of Isothermal Alloy in a Forced Flow by Phase Field Method
Defects Analysis and Improvement for Electricmotorcar Aluminum Alloy Wheel by Gravity Casting
Effects of Melt Treatment on Dendrite Coherency of A357 Alloy
Effect of Cooling Rate on Microstructure and Properties of Heat-Treated Fe₃Al Intermetallics
Numerical Simulation Study of Consumable Electrode Melting Process in Electro-Slag Remelting Ingots
Numerical Simulation of Filling and Solidification Process for Low Superheat Billet Continuous Casting
Optimization of the Ultrasonic Wave-Assisted Extraction Condition of Peanut Protein Isolate
Ti₅₀Ni₂₅Cu₂₅ Amorphous Alloy Ribbons Progress
Microwave-Assisted Leaching Vanadium from Stone Coal
Effect of Cooling Condition on Zr-Rich Core Formation and Grain Size in Mg Alloy
Research of Synthesizing Biodiesel from Suaeda Salsa by Ultrasonic-Assisted Transesterification
The Study on Numerical Simulation of Tailor Welded Blanks on Square Cup Stamping
Study of Heat Transfer of Steel Solidification Process
Casting Solidification Behavior of Bimuth in Free-Cutting Copper Alloy
Analyzing Age Hardening Behaviors of an Al-Si-Mg Cast Alloy
Numerical Simulation on Splat-Quenched CuCr25 Alloys
Microstructure Changes and Computer Simulation of K4169 Superalloy Using Chemical Grain Refinement Casting
Effect of Aluminium Powder on the Hot Mechanical Properties of Corundum-Silicon Nitride Composites
Microstructural Refinement Process of Pure Magnesium by Pulse Magnetic Field Treatment
Research on Microstructure and Mechanical Properties of High Boron Cast Steel
Preparation of SiC-Low Chromium Cast Iron Composite Material by Cast-Infiltration
Analysis and Precaution of the Hard Spots in Die-Casting Parts of Aluminum Alloy
Effect of Rare Earth on Microstructure and Property of Refining Impure-Copper
Three-Dimensional Numerical Simulation of Metal Flow in the Initial Stage of a Twin-Roll Strip Casting Process
Interrelation between Microstructure and Mechanical Properties of Heavy Section Ductile Iron Casting
Effects of Superposed Field on Solidification Microstructure of Al-7wt%Si Alloy
Smelting Technology in Electric Furnace for Thick and Large Gray Iron with High Strength
Numerical Simulation and Technology Optimization of Rear Oil Seal Bearing Die Castings Based on ProCAST
Effects of Spinning on Microstructure and Mechanical Properties of A356 Alloy
Effect of Magnetostatic Field on Microstructure of 5005 Aluminum Alloy Sheet by Roll-Casting
Effects of Submerged Heater on the Vertical Bridgman Crystal Growth
Experimental Modal Analysis in Casting Production Applications
Study on Unidirectional Solidification of Slab Ingot for Special Heavy Plate
Clad Strip Casting Using a Twin Roll Casters
8 Precision Manufacturing Technology and Measurements
Development of Basalt Fiber Reinforced Wood-Plastic Composite Materials
Parameter Calibration Method Based on Screw Theory for Articulated Coordinate Measuring Arm
Sapphire-SiO₂ Solid-Phase Reaction of Polishing Proving Research
Experimental Study on the Surface Micro-Geometrical Characteristics of Quenched Steel in Ultrasonic Assisted Turning
Thermal Deformation Prediction in Machine Tool Model by Using Transfer Functions with Time Delay
Soft UV-Imprinting Using Gasbag Pressure Mechanism for Side-Direction and Non-Planar Substrate
Experimental Evaluation of System Performance for a Machine Tool Cooler Using Inverter Driven Control
A New Method of Making Grating - Etched by SPM
Experimental Measurement of Friction Coefficient Applied to HSM Modeling
Cutting Mechanism and Model for Cutting Al/SiCp Composites
Development of an Ultrasonic-Vibration Microforming Apparatus
Study on Accurate Tool Positioning Technology for Noncircular Turning System
Ultrasonic Grinding Three-Dimensional Trajectory Simulation and Experimental Study
Investigation into High-Speed/Super-High Speed Grinding
Research on CMP Characteristics Attribute to Groove Size
The Installation Eccentricity Error Compensation Technology for Gear Based on CNC Gear Measuring Center
A Novel Sensorless Control of a Two-Axis Planar Motion Stage for Precision Positioning
Piezoelectric Behavior Based on Mixing-Doped in Lead Zirconate Titanate Ceramics and Application
Micro Leverage Modeling, Simulation and Optimization for Micromechanical Silicon Oscillating Accelerometer
Technology of Tooth Pitch Deviations Measurement for Master Gears of Precision Grade 1
Effect of Operated Parameters on Removal Rate and Surface Roughness in Precision Atomization Ultra-Polishing Process of Copper Surface
Application of PPR to Thermal Error Modeling of an INDEX-G200 Turning Center
Study on Ultrasonic Cavitation Mechanism of Honing
The Effect of Speed Matching on the CMP Uniformity
Preparation and its Silica Wafer CMP Performance of Cationic Polyelectrolyte Modified Benzoguanamine Formaldehyde/SiO₂ Composite Abrasives Slurry
The Performance Parameters Measurement of Longitudinal Piezoelectric Transducer and Experimental Study
Billet Design Optimization of Helical Gears Precision Forging Based on Response Surface Method and FEM Simulation
Shaping Principle in Hobbing and Analysis on Errors of Involute Gear Tooth Surfaces
A Vision Alignment Method Based on Improved Genetic Algorithm for IC Packaging
A Monitoring and Wireless Transmission System on the Machining Tool
A New Method for Detecting the Diameter and Spatial Location of Tiny Through-Hole
Simulation for Aberration of Chromium Atomic Beam Focusing and Deposition
Study on the Inspection Method of Gas Valve’s External Taper Screw Thread Based on Image Domain
Signal Sampling and Accuracy Analysis of Large Gear’s Angular Displacement Measuring its Deviation On-Machine
9 Other Related Topics
The Numerical Simulation of Decarburization of 60Si2CrVA in Heat Treatment by DEFORM-3D and the Research of Practical Application
Improved Genetic Algorithm Based on Operation Order Matrix Encoding for Job Shop Scheduling Problem
Effect of the HTP to X80 Ferrite Steel Structure and Mechanical Properties
Effect of Heat Treatment on the Microstructures and Mechanical Properties in AZ31 Magnesium Alloy Processed by Continuous Rheo-Extrusion
Study on Creep Properties of SiCp/AZ61 Composites
An Empirical Surface Roughness Model of Titanium Alloys Cut with Abrasive Water Jet
Wire Electrical Discharge Machining – High Speed VS Abrasive Waterjet - A Case Study
Research on Curvature of Tooth Flank of Gleason Spiral Bevel Gears
Corrosion Behaviors of X80 Pipeline Steel in Different Simulated Alkaline Soil Solution
The Structure and Electrochemical Properties of BDD Deposited on Ti Substrate by MWCVD
Research on the Deformation Area Materials’ Stress and Contour Surface’s Forming Mechanism of Closed Extruding Fine-Blanking
Research on an Electromagnetic Driven Bi-Disc Compensator for Rotor Auto-Balancing
Effect of Si Content on Microstructure and Wear Resistance of Cold Roll Steel with 5%Cr
Virtual Manufacturing Research of Steam Turbine Blade Technology Based on UG and VERICUT Software
Analysis of Reliability and Operation Characteristic of Composite Insulator
Effectiveness of Low Frequency Electromagnetic Shielding of Concrete with the Functionally Primitives Materials of Short Carbon Fibers and Graphite
Research of E-Business Security Based on SOAP Protocol
Effect of Zn²⁺ Doping on Luminescence Properties of Red-Emitting Phosphors CaMoO₄:Eu³⁺
Design of a New Multi-Channel High-Low Pressure Micro-Ejection System
The Life-Span Prediction of Reinforcing Bars Corrosion of Self-Compacting Concrete
Effects of the Copper Addition on the Precipitation of Al-Mg-Si Alloys
The Numerical Simulation Analysis of Fracture Properties and Restoring Force Characteristics of Bare Base of Steel Column
A Simple Synthesis of Mesoporous Silica Hollow Microspheres by Fast Hydrolysis and Condensation of Tetraethyl Orthosilicate
Influences of Moisture Expansion on Motion Errors of Granite Hydrostatic Guideways
Photoresponsive Properties of a Azobenzene-Based Polyacrylamide Copolymer
Test Device for Research of Heat Conduction in Plasticization Processes of Natural Materials
Meshing Model in Gear with Timing Belt
Study on Sequential Compliance Method Influenced by Shape Parameter of Weibull Distribution
The Reliability of Enlarging the Cross-Section in Reinforcing the Frame Construction Buildings
Study on Performances and its Structural Designing of the High-Speed CNC Lathe Epoxy Resin Concrete Bed
Research on Properties of Al₂O₃-Based Cermets Inert Anode
Research on Creep Fracture Mechanics Parameter by Reference Stress Method
Tribological Performance of Iron Ore Tailings Enhanced Resin Composites for Automotive Brake Linings
Efficacy Rack Angle on the Orthogonal Machining of AA5083 in the Cutting Force
Optimal Design of Cathode’ Working Tooth in ECM for Rifle Based Visual C++
Research on the Application of the Prediction of the Expressway Traffic Flow Based on the Neural Network with Genetic Algorithm
Elastic-Plastic Finite Element Simulation of Bulge Forming Process Using a Variable Cross-Section Solid Bulging Mold
Static Analysis of Cable-Stayed Suspension Bridge under Concrete Shrinkage and Creep
Energy Dissipation in Timing Belts Made from Composite Materials
Experimental and Numerical Machining of AA 5083
Development and Trend of Ultrasonic Techniques in On-Line Detection for Strip and Plate’s Internal Defects
Characteristics of In-Ge-Sb-Sn-Te Thin Film Used for Phase Change Optical Recording Media
Reliability Analysis for Structure System with the Local Dented Plate
Functional Steel Hardness and Wear Improving on a Basis of Phenomena of Grain Boundaries Phase Transition
Process Calculation of Producing Stainless Steel Crude Melts by the Chromium Ore Smelting Reduction in a Converter
Prediction Model of End-Point Carbon Content for BOF Based on LM BP Neural Network
Three Dimensions Construction Model and Finite Element Analysis of Hydraulic Support and Relevant Model
Hydraulic Support Model Test Load Equipment and its Hydraulic Control System
Fabrication of SiCp/ZL101 Composites Substrate with Near-Net-Shape
The Influence of B₂O₃ on the Microstructures and Properties of CaO-B₂O₃-SiO₂-Al₂O₃ Glass-Ceramics (α-Al₂O₃) System
Effect of High Magnetic Field on Phase Transformation of 7055 Alloy during Homogenization
Study on the Solidification Structures of Al-Fe-Si Alloy under DC and AC Magnetic Fields

Les mer

Selected, peer reviewed papers from the International Conference on Manufacturing Science and Engineering (ICMSE 2011), 9-11 April, 2011, Guilin, China

Sponsors, Committees, Preface
1 Surface Engineering / Coatings
Ultrasonic Elliptical Vibration Turning Studty for Precision and Ultra-Precision Workpiece
Experimental Research on Improving Wear Resistance of Coating Surface by Magnetron Sputtering
The Study on Metallurgical Property of 380m³ Blast Furnace Slag of YIGANG
Research in Vacuum Diffusion Bonding of Ti-6Al-4V Alloy and Type 25 Low Carbon Steel
The Influence of Alloying Additives on the Machinability of Austenitic Stainless Steel
The Spray Angle Improvement of Single Inlet Pressure Swirl Atomizer Using Partial Structure Modifying
Study on Friction and Wear Behavior of GCr15/1045 Steel under Nano-Particle Additive Conditions
The Study of Hole Injection in OLEDs with Ultra-Thin Sol-Gel TiO₂ Layer
Mass Customization Management in E-Commerce Configuration with early Supplier Involvement
Prediction of 3D Cavity Hydrodynamic Noise Based on Equivalent Source Method
Numerical Simulation of the Effects of Cell Size on the Mechanical Property of Microcellular Polypropylene
Sliding Friction and Wear Test of TiAlN TiN Films and 40Cr Steel
Computer Simulation on Mo/Al₂O₃ Solar Energy Selective Absorbing Coating
Effect of Two-Step Deforming and Aging Process on the Properties and Microstructure of Cu-Cr-Zr-Mg-Si Alloy
Effect of Pre-Shot Peening on the Fretting Fatigue Behavior of Plasma Nitrided AISI 420 Stainless Steel at 350 °C
Microstructural Study of Nanostructured ZrO₂ Based Thermal Barrier Coatings Fabricated by High Efficiency Supersonic Plasma Spraying
Influencing Factors of AZ31B Sheet Deep Drawing
Preparation of ZrTiN Hard Coating and its Performance
Application of Monte Carlo Method in the Measurement Process Design According to next Generation of GPS
Integrated CAD System for Bridges Based on BrIM
Effects of TiO₂ on the Viscocity and Solidification Temperature of Mold Fluxes for the Stainless Steel
Contact Analysis for Joint Interfaces of Machine Tools Based on a 3-D Anisotropic Asperity Model
Grinding Performance of Permeated Grinding Wheel
Investigation of the Effects of Dielectric Inlet Pressure in Inner Jetted Dielectric EDM Milling
Research on the Adhesion of Stainless Steel Film on Gd by Magnetron Sputtering
Oxidation Resistance of CrN and CrAlN Coating Tools
Research on Producation of a New Type of Biological High Molecular Material Poly(γ-Glutamic Acid)
Industrial Preparation of SiC Ceramic Coating for High Temperature and Anti-Oxidation of C/C Composites
Influence of Friction on the Vibratory Response of Structure
Microstructures, Thermal Shock Resistance and Isothermal Oxidation Resistance of Nanostructured Ceria Stabilized Zirconia Coatings
Application of Repair and Anti-Corrosion Technology on Reinforced Concrete Structures of a Domestic Wharf
Study on High-Temperature Oxidation Characteristics of Pure Vanadium
Friction and Wear Characteristics of Electrodeposited Ni-MoS₂/Al₂O₃ Composite Coating
Influence of Liquid Phase Migration on Intermittent Extrusion of Aqueous Al₂O₃ Paste
On the Dispersants of Diamond-Ni-P Composite Electroless Plating and Properties of the Coating
High Temperature Oxidation Behavior of (Ti, Al) C Ceramic Coatings on Carbon Steel Prepared by Electrical Discharge Coating in Kerosene
Study on Contractive Rate Inspecting Testing Mould of Thermoplastic
Comparison of Different Content of Cd and Sb Element on the Microstructure, Mechanical Properties of As-Cast AZ31 Magnesium Alloy
Evaluation Equation of the Flat Compression Properties of Corrugated Sandwich Structure
Study on Active Screen Plasma Carburizing of Austenitic Stainless Steel
The Bifurcate Fracture Analysis of Linear Red Copper Penetrator
Fabrication of PET Fabric/Ni-Fe-B Alloy Composite through a Electroless Plating Process with a Novel Activiting Method
Biocompatibility Research of Medicine Titanium Alloy Coating by Microarc Oxidation
Design of Virtual Oscilloscope Based on S3C2410
Research on Lubrication and Wear-Resistant Mechanism of Ni60A/MoS₂ Composite Coating
Study on the Mechanism of Improving the Formability of DP Steel LTWB at the Elevated Temperature Level
The Simulation and Experimental Study of Metal Cutting Based on Cold Air Technology
Tribological Performance of Fabric Composites Filled with Nano-Additive under Varied Load Conditions
Polymer Cement Waterproof Coating and its Properties
Corrosion Characteristics of PEO Films on AZ31 Magnesium Alloys
Numerical Simulation of Casting Process for Gray Iron Butterfly Valve
Nickel-Diamond Compound Electroless Plating on Cast Aluminum Alloys
Process Research on High-Speed Small Hole Drilling by EDM Combined with Magnetic Field and Water Dispersant
Preparation and Oxide CMP Performance of Inorganics Coated Polystyrene Composite Particles
EIS Study of Molybdate Conversion Coatings Formed on AZ91D Magnesium Alloy
Microstructure and Properties of Fe–Al/Cr₃C₂RE Composite Coating Produced by HVFS
The Measurement for the Effective Anisotropy Constant of the Nanocomposite Permanent Magnetic Material Nd₂Fe₁₄B/α-Fe
Development of Visualization System for Aircraft Assembling Process Oriented Assembly Field
The Crystallization Characteristics of Carbon Nanotubes/Pb-Sn Composite Coatings
Study of Microstructure and Adhesion Strength of WC-Co Coating Sprayed by High Velocity Oxygen Fuel
Performance and Property of Ni Base Coatings by Using Plasma Arc Technology for 18Cr2Ni4WA Steel Repairing
Energy Consumption and Emissions Analysis of Natural Gas Exploitation
High Temperature Erosion Behavior of Mo-Si-Ni-Al Metal-Ceramic Composite Cladding Layer Produced by TIG Welding
Rheological Fracture Analysis of Beam
The Effect of Complexing Agent on the Surface of Aluminum Alloy Plating Ni-P Alloy
Polyhedral Oligomeric Silsesquioxane/PDMS Hybrid Coating Protecting Polyimide from Atomic Oxygen Erosion
Finite Element Analysis for Temperature Field of Laser Remelting Plasma Sprayed Ni-Based Gradient Coating on Ti6Al4V Alloy Surface
The Effect of NaOH on the Surface of Magnesium Alloy Ni-B Alloy Plating Properties
Temperature’s Effection to Electroplating Ni-SiC Plating on Aluminum Alloy
pH’s Effection to Electroplating Ni-SiC Plating on Aluminum Alloy
Preparation and Performance of Compound Polyurethane Foam Plastic Board for Freezing Prevention in Channel Lining
Effect of Carbon Fiber on Composites
The Experimental Analysis of Modifier on Fluid Magnetic Abrasivetool
The Research on Coating of Electroless Ni-W-P Ternary Alloys
Advanced Monitoring of Tool Wear and Cutting States in CNC Turning Process by Utilizing Sensor Fusion
The Bending Behavior of Surface Composite Layer Ni/WC Fabricated through Vacuum Infiltration Casting
Structural Reinforced Parts for Improving Roof Crush Performance
Study on Morphologies and Structures of Ceramic Coating Prepared by Micro-Arc Oxidation on TC4 Alloy
Preparation by Electroless Plating and Electromagnetic Shielding Effectiveness of Ni-Cu-Coated Calcium-Magnesium Silicate Whisker
Arsenic Removal from Wastewater Using Adsorptive Mediums
Preparation and Characterization of Al₂O₃/ZrO₂-MgO-CeO₂ Composite Coatings Prepared by Flame Spraying
Efficiency-Reinforcement Design of Hydraulic Reciprocating Sealing Driven by Ideal Solution
Photocatalytic Degradation of Polycyclic Aromatic Hydrocarbons on Soil Surfaces Using Fe₂O₃ under UV Light
The Optimization Analysis of Equipment Maintenance Based on Monte-Carlo Simulation
Study on Salt Fog Corrosion of FeCoCrMoCBY Amorphous/Nanocrystalline Alloy Coating
Influence of the Section Plane Position on the Performance of Power Ultrasonic Transducer
Effect of Heat Treatment on Structure and Hardness of Electroless Ni-P Plating
High Temperature Oxidation Behavior of NiAl and Ni₃Al Argon Arc Claddings
Influence of Temperature and Oxygen Pressure on the Oxidation Process for Preparing Tritium Permeation Barrier
Rheological Behavior of Polymethyl Methacrylate (PMMA) Filling through Micro Channels
Preparation and Properties of Electroless Deposited Ni-Sn-P Ternary Alloy Coatings
Residual Stress State of TIG Remelted Zone in the Weld Toe after Chilling Treatment
Realization of the Closed Cycle Diesel Control System
Slip Fascia Stiffness Effect to the Fifth Metatarsal Movement during Inversion Landing
Structure of Emulsion Cavitation Jet and Jet Peening Impact on the Fatigue of Plan Carbon Steel Q235A
Parameter Design and Result Analysis for Radial AC Hybrid Magnetic Bearing
Effect of SnO₂ Modification on Permeate Flux of Α-Al₂O₃ Microfiltration Membrane for Treating Fe(OH)₂ Suspensions
Experimental Study on Tungsten Leaching from Cemented Carbide
Microstructure and Cavitation Erosion Behavior of Carbide-Based Coating Deposited by Electrical Arc Spraying
Preparation and Properties of Weldable Self-Cleaning PVDF/PVC Blended Film
Analysis on the Anodic Oxide Film of Aluminum Pistons Formed in High Current Density and Wide Temperature Range
Study of TI64 Vibration Laser Metal Deposition Process
In situ Synthesis of Ceramic Phase Reinforced Fe-Based Alloy Surface Coating by PTA
Cavitation Erosion Characteristics of an Iron-Based Coating Prepared by High Velocity Arc Spraying
Microstructure and Properties of Mo₂FeB₂ Cermet Coating by Induction Heating
Influencing on Structure and Mechanical Properties of PA6/PP Blends for Different Graft Yield Compatibilizer
Optimization and Design for Parameter in Injection Molding Technology of Cell Shell of Polypropylene
The Research on Deformation Analysis of Rigid Packed Hole Assembly Dynamic Model in 3D Borehole
A Novel Tetrahedral Mesh Generation Algorithm for Finite Element Analysis
Tooth Surface Bi-Directional Envelop Machining Method of Involute Arch Cylindrical Gear
Improvement on the Manufacturing Process of the Dental Surgical Guide Made by a 5-Axis CNC Drill Press
Influence of Current Density on Structure and Performance of Micro-Arc Oxidation Coatings on AZ31 Magnesium Alloy
Research of Compress Anti-Surge Based on the Integral Separation PID Algorithm
Effect of High-Intensity Pulsed Ion Beam Irradiation on the Electrochemical Corrosion Behavior of AZ31 Magnesium Alloy
Preparation of LaNi₅ by FFC Cambridge Process
Preventing Sintering Bricks of Purple Sandy Shale from Lime Brust: Experimental Research on Fixing Calcium with Sulfur
Preparation and Application of Oxygen Quenching Pressure Sensitive Paints
Research of Radial-Axial Ring Rolling Process Curve
Technical Problems to be Solved in Outside Surface Galvanized and Inside Surface Plastic Coated Steel Pipe for Main Gas Pipe Line
Experimental Study on Wear Resistance of Engine Cylinder Based on Surface Hardening Technology
Study on Relationship between the Groove Structure and Efficiency of Electromagnetic Pump Used in Aluminum Alloy Casting
Dispersion of Carbon Fibers in the Hybrid Fiber Cement-Matrix Composites
The Experimental Study on Grinding Properties of Gas Quenching Steel Slag
The Design and Analysis of Nozzle
Room-Temperature Ferromagnetism in Ni-Doped Na_0.5Bi_0.5TiO₃ Crystals
The Study on the Precipitation Behavior of the Second Phase Particles for As-Hot Rolled Dual-Phase Nb-Bearing Steel
Film Formation Property of Mineral Particles as Grease Lubricant Additives at Different Friction States
Semi-Encasing Sucrose Ester and Grafting Silkworm Pupae Protein on Polyester Fabric to Modify Polyester Fabric Surface
Placement Optimization for Thermal Performance of Embedded Power Chip Microwave Modules Using BP-GA
Preparation and Optical Property of Mn-Doped ZnO Nanorods
Chemical Vapor Deposition (CVD) of ZrC Coatings from ZrCl₄-C₃H₆-H₂
Surface Characterization of Chinese Fir/TiO₂ Composite
Research about Relationship of Laser Quenching GCr15 Steel Bending Properties and Hardening Layer Fracture Fractal Dimension
Analysis and Solution of Hydraulic Cylinder’s Leakage Problem
Structure and Property of CrAlN Coatings Prepared by Bipolar Pulsed Dual Magnetron Sputtering (BPDMS) under Different Pulse Bias Voltage
Corrosion Resistance of Al₂O₃-ZrO₂ Composite Coating by Microarc Oxidation on 2A12 Aluminum Alloy
Optimum Autoclaved Cement Concrete Mix Design Based on Flexural Strength
Comparison of Surface Roughness Measurement in Dichromatic Speckle Patterns with Autocorrelation Method
Study of Double-Polar Micro-Arc Oxidation Ceramic Layers on Aluminum Alloy
Microstructure and Phase Composition of Iridium Coating on Molybdenum after Heat Treatment at 1400°C
Experimental Study on the Through-Mask Electrochemical Micromachining (EMM) Process
Numerical and Experiment Analysis of Rail Wear
The Lightweight Design on the Pressure Hull of Underwater Gliders Using ANSYS
Microstructure Characterization and Abrasive Wear Performance of HVOF Sprayed WC-Co Coatings
Influence of Different Wave-Lengths Artificial Light on Surface Discoloration of Dyed Veneer
The Application and Research for Estimation Method of Turning Cost
Influence of Electric Field Interference on Three Nozzles Electrospinning
Inheriting of Traditional Culture in Design
Functional Evaluation Software Design of Surface Topography Based on MATLAB
Research on Stress Calibration Technology on Aluminum of High-Speed Train Body Structure by Nondestructive X-Ray Method Measurement
The Research about Oxidation Kinetics of Ti60 Alloy and Ni-Co-Cr-Al-Y-Si Coating on Surface
Enhancement of the Service Lifetime of TiN Coated Punch Side pin by Adding a Small Amount of Yttrium
500MPa Seismic Rebars Developed by Nitrogen-Rich and Vanadium-Microalloyed, Controlled Cooling Technology
Thermal Effects of Aluminum Nitride
Study on the Incline Limit in Gas Metal Arc Welding Based Rapid Forming
Laser Cladding In Situ Tungsten Carbide Reinforced Ferrous Matrix Surface Composites
Study on Rapid Manufacturing of CAFÉ Injection Mold
The High-Temperature Oxidation Behavior of the Fe-Ni Based Alloy Coating Produced by Plasma Cladding
Anodic Aluminum Oxide Matrix Encapsulating Nonivamide for Anticorrosion and Antifouling Application
Study on Structure and Properties of Alloy Nodular Cast Iron Roller with Laser Heat Treatment
A Study on Dieless Incremental Sheet Metal Forming Using Water Jet Technology
Solid Modeling and Machining Approach of the Impeller Based on Five-Axis Machine Tool
Characterization and Corrosion Studies of Amorphous/Nanocrystalline Conversion Coatings Formed by Applying Static Magnetic Field on AZ91 D Magnesium Alloy
Direct Current Field Effect on Silicon Pack Cementation for 1045 Steel
The Initial Practice on Electro-Modification Processes to Al-12Si Alloys
The Influence of Coating on the Elastic Modulus of Basalt Filament Diaphragm Fabric
An Evaluation Model of Enterprise Informatization Level Based on Grey Whitenization Weight Cluster Analysis
Effect on Microstructure and Hardness of Plunger Piston of Fe-Based Composite Coating by Laser Cladding
Research on the Microstructure and Wear Resistance of Hardfacing Layer on Big Cold Trimming Die Insert
Study of the Ce-Mn Conversion Coating on 6061 Aluminium Alloy
The Finishing of Rolling Bearing Raceway by Electrochemical Mechanical Finishing (ECMF) Technology
Research on Factors Affecting Durability and Improvements for FRP Reinforced Concrete Structures
Study on the Mechanical Properties of PP/EPDM/Mesoporous MCM-41 Composites
A Hard and Thick Fe-Based Amorphous Composite Coating
Study on Extraction of Dioscin from D.zingiberensis
Microstructures and Properties of Laser Al Alloying on AZ31 Magnesium Alloy
Effect of Direct Current on the Semi-Solid Isothermal Heat-Treated Microstructure of ZA84 Magnesium Alloy
Observation and Removal of Atmospheric Micro-Contaminants on SUS304 Steel
The Real-Time Monitoring Tool States Based on Wavelet Analysis
Study on the Acquisition Method of a Digital Model for Oral Cavity Teeth Based on Point Cloud
Growth Process and Corrosion Resistance of Ceramic Coatings of Micro-Arc Oxidation on Mg-Nd Magnesium Alloys
Effects of Ultrasonic Deep Rolling on Fatigue Performance of Pre-Corroded 7A52 Aluminum Alloy
CrN Films Deposited by Middle Frequency Magnetron Sputtering
Low Cost Vibrometer Utilizing Laser Diode Self-Mixing with Sound Card Controlled by LabVIEW
Effect of Saccharin Addition on the Electrodeposition of Nickel from a Watts-Type Electrolyte
The Micro-Mechanical Behavior of Inclusions under Tensile Load in X80 Pipeline Steel
Effect of Cold-Rolled Process Parameters on Deep-Drawing Performance of Micro-Carbon Steel
Study on Low Temperature Deposition of TiN Films and their Tribological Properties
Influence of Voltage Parameters on Formation Process of MAO Ceramic Coating on Aluminum Alloy
The Evaluation of NHW-1 Type Coated Tubing Abrasion Resistance Performance
Effect of Equal Channel Angular Pressing on Microstructure and Dislocation Strengthening of 3003Al Ingot
Design of the Range-Measurement System for Mobile Robots Based on ARM
Numerical Simulation of Impact Process of Coal and Gangue
Errosion-Corrosion Critical Performance of Surface Nanocrystalline 20 Carbon Steel in Condensate Water
Corrosion Behavior Research of Fe₃Al Intermetallic Compound in H₂S/CO₂ Environment
Study on the Structure of Grind-Hardened Layer and Parameter of Hardening Depth of 42CrMo Steel
Study on Rollers’ Angular Velocity Matching of Rolling Driven Equal Channel Angular Deformation Technology
Friction/Wear Behaviors of Magnetron Sputtered TiB₂-C Composite Films on Ti6Al4V Alloy Substrate
Research on Anti-Cracking Performance of Polypropylene Fiber Reinforced Cement Mortar
Thermoelastic Contact Analysis of Functionally Graded Materials with Properties Varying Exponentially
Research on Droplet Transfer of MIG Welding with Alternating Longitudinal Magnetic Field
Kinematic Analysis and Optimization Design of an Eccentric Crank Slide-Block Mechanism Based on ADAMS
Properties of Anodic Coatings Obtained in an Organic, Environmental Electrolyte by Micro Arc Oxidation on Magnesium Alloy
Evaluation on Cleaning Effect of Cleaning Cloths for LCD Screen Using Principal Component Analysis
Mechanical Properties of Flip-Chip Solder Joints Effected by Electromigration
Explosive Compaction-Coating Manufacture Large Area Coat
Structure and Properties of Superfine Coating on Cast Steel by Electro-Spark Deposition
Properties and Synthesis of α-Fe₂O₃/SiO₂ Composite Color
Thermal-Field Experimental Study of a Thin Circular Carbon-Fiber Tube in Stratosphere Environment
Effects of Thermal Exposure on Mechanical Properties of Al-4.87Cu-1.2Mg-1.0Ag Alloy
HRTEM Investigation of Precipitates in Al-Zn-In-Mg-Ti-Ce Anode Alloy
Improvement of Tribological Behavior of Biomedical Nanostructured Titanium by Magnetron Sputtered SiC Films
Study and Application of Cemented Carbide Coating Technology
Synthesis, Characterization and Antimicrobial Activity of a New Preservative, 6-O-Chitosan Ester of P-Hydroxybenzoic Acid
Study on the Complex Strengthening Processes of 5Cr2NiMoVSi Steel Large Hot Forging Dies
Numerical Research for the Film Surface Wave with the Different Flow Case
The Online Assessment Method of Tower Crane Effective Life Based on Tower Crane Group Monitoring System
Friction and Wear Properties of W,Mo,Co Alloyed Layer on T8 Steel by Double-Glow Technique
The Effect of Nano-TiO₂ on the Performance of the Solar Heat-Reflective Coating
Diffusion Study of Al-8%Si Alloy Double-Coating on Steel
Influence on Tribology Characteristic of the Steel-Cast Iron Friction Pair under Different Concentration of the Self-Repairing Additive and Mechanism Analyzing
Tribological Performance of TiAl Based Alloy Treated with Plasma Surface Chromizing Process
The Influence of Plating Temperature on the Properties of Electroless Ni-Cu-P Alloys on Aluminum
Photo-Aging of Polyurethane Coating Based on TDI-TMP and N3390
Properties of Ceramic Coatings on the Wall of Coke Oven
Different Curing Agents on the Photoaging of Polyurethane Coatings
Effect of Frequency on Composition and Microstructure of Siliconized Layer Using Pulse Electrodeposition
Study on Characteristics of Acoustic Emission Property in the Normal Concrete Fracture Test
Research on Random Stress Spectrum for Cumulative Fatigue of Crane Metal Structure
Effect of Molecular Weight on Phase Diagram of Epoxy/Polyetherimide-Siloxane Blends
Experimental Study on Mechanical Properties of Rubber Used for Damping Bearing
Prediction of Ferrite Transformation in Nb-Containing Microalloyed Steels during Continuous Cooling
Study on the Effect of Ultrasonic Waves on the Low Temperature Electroless Ni-P Plating on Copper Substrate
Effect of Normalizing Pre-Treatment on Microstructure of Laser Hardened Ductile Iron
Surface Treatment of Magnesia-Calcia Firebricks with CO₂
Anticorrosive Films Prepared by Incorporating Permanganate Modified Carbon Nanotubes into Waterborne Polyurethane Polymer
Experimental Study of Activation the Reactivity of Waste Mortar
Influence of Mn Doping on the Microstructure and Optical Properties of ZnS Nanocrystals
Impact Abrasive Wear Resistance of High-Chromium Cast Iron Bars Reinforced Hadfield Steel Matrix Composite
Study for Vibration Measurement and Failure Diagnostics System for CNC Milling Machines Based on LabVIEW
Research on Optic Fiber Coatings and Curing Process Monitoring of Composites Based on FBG
Fault Analysis on Crosshead Fracture of the Reciprocating Piston Compressor C102B
Effects of Nd on Microstructure and Properties of Spray Deposited Mg-Al-Zn Alloy
Research on Anti-Erosion Mechanical Properties of Steel Structure Coating
Enhanced Wear Resistance of Al-15Si and ZK60-1Y Mg Alloys Induced by High Current Pulsed Electron Beam Treatment
Flame Retardant Polyamide 6 Composites Using NMH or NMH/MCA/APP
Effects of the Welding Process on Mechanical Properties and Corrosion Resistance of 2205 Duplex Stainless Steel
Research on the Mathematical Model for the Price Regulation of Power Demand-Side
Effect of Carbon Nanotubes Content on the Structure and Photo-Oxidation Behaviors of Polypropylene
Effect of Preheating Temperature on the Cooling Curves of BW Quenching Media
Study of Stress in TiO₂ Films Grown by Electron-Beam Evaporation
Modification of the Flax Fiber with Acetylation
Research on Mechanism of Polymer Inhibiting Secondary Reaction in Clinker Leaching Process
Study on the Corrosion Resistance and Wear Resistance of Micro-Arc Oxidation Coatings on the Clad Plate of Aluminum and Magnesium Alloy
Calibration Methods of an On-Line Inspection System on a Large-Scale Turning-Milling Machining Center
Influence of Annealing Temperature on the Antibacterial Activities and Photoactivity of N-Doped TiO₂ Films by Ion Beam Assistance
A Kind of Non-Contact Measurement System for Areal Surface Texture
Study on the Brush Plating Technology of GH34 Heat-Resisting Steels
Evolution of Crystalline Phase and Morphology of the Products Formed during the Hydrothermal Synthesis of Y₂O₃ Powders
Study on Micro-Arc Oxidation Composite Ceramic Coating Properties in the Textile Machinery Spare Parts
The Corrosion Mechanism of Zn-5%Al-0.3%Mg Coating
Comparative Study of Friction and Wear Behavior of Diamond-Like Carbon Coating under Various Lubricants
Process, Microstructure and Properties of Plasma-Sprayed Ceramic Coating on AZ91D Magnesium Alloy
Design of Scanning Micro-Arc Oxidation Forming Ceramic Coatings on 2024 Aluminium Alloy
Research on Surface Metallization of Carbon Fiber Based on Electroless Plating
The Design of CNC System on the Electron Beam Welder
Tribology of Plasma Sprayed Al₂O₃-13%TiO₂ on AZ91D Magnesium Alloy
Study on Electron Beam Alloying Micro-Structure and Wear Performance of 3Cr2W8V
Studies on Mechanical Properties of Thin-Walled MHS Structure
Study on the Prediction of Surface Roughness of ZTA Ceramics under Ultrasonic Assisted Grinding
Study on Milling Gray Cast Iron Using PCBN Indexable Face Milling Tools
Experimental Research on the Sound Insulation Property of Lightweight Composite Paper Honeycomb Core Wallboard
Preparation and Electrical Properties of Aligned Carbon Nanotubes/Epoxy Resin Composites Induced by a Low Magnetic Field
Preparation of Wood-Based EMI Shielding Composite via a Short Process Electroless Plating
Stochastic Finite Element Method for Nonlinear Dynamic Problem with Random Parameters
Research on Fault Diagnosis and Application for Rolling Element Bearing Based on Fuzzy Analysis
Preparation of the Layer-by-Layer Deposited Silver Nanoparticles Multilayer Films on Poly(ethylene Terephalate) Substrate
High Stable Mechanism Design for Micro-Wire Transport System in WEDM
Research on the Temperature Field and Roast Mechanism of Blast Furnace Tap-Hole Clay
Surface Roughness Prediction in End Milling of Machinable Glass Ceramic and Optimization by Response Surface Methodology
Observation of Capillaries after Implanting Porous Silk Fibroin Films in Rats
Microstructure and Creep Properties of Casting Mg-8Al-0.3Mn Alloy Containing Ca and Sr
Optimization of Process Parameters on Ti-6Al-4V Using Central Composite Design Method
Press Forging of Thin-Walled AZ31 Magnesium-Alloy Components
2 Modeling, Analysis and Simulation
Topological Synthesis of Fully Decoupled Parallel Manipulators by Screw Formulation of Jacobian Matrix
RDX Kinetic Model Evaluation by Nth Order Kinetic Algorithms and Model Simulations
Thermal Stability Determination, Anti-Biodegradation, and Thermal Degradation of Nitrocellulose with Various Nitrogen Content by DSC and FT-IR
Phase-Field Simulation of Double Dendritic Growth in Solidification of Binary Alloy with Forced Convection
The Wavelet Analysis and Processing of Weak Vibration Signal
Preparation and Stress Calculation Analysis of Light Elastic-Plastic Material
Finite Element Simulation of Residual Stress in Heavy Rail
The Determination of Using Limiting Clearance between Crank Pin and Bearing Bush in Volkswagen
Direct Electro-Magnetic Mechanical Analysis of U-Shape Coil
Numerical Analysis of Micro-Mixing in Rough Microchannels
Study on Hot Deformation Behavior and Processing Maps of Cu-0.35Cr-0.15Zr Alloy
Influence of Parameter Identification of Anisotropic Yield Function on Spring-Back Prediction in Finite Element Simulation of Sheet Metal Forming Process
Structural Optimization of Ground Vias for 3D ICs
The Numerical Simulation of Directional Solidification Process Temperature Field for Large-Scale Frustum of a Cone Ingot
SVR-Based Predictive Model for Purity of the Mg-Al-Hydrotalcite
Optimal Design of Automotive Steering Column Bearing by Simulated Annealing Algorithm
Numerical Study of Defect Free Elbows Subjected to In-Plane Bending Moment
Design Thermal Structure of Aluminum Plate LED
Temperature Rise and Heat Transfer in High Speed Machining: FEM Modeling and Experimental Validation
Determination of Mechanical Behavior of AA5083 Alloy under Machining Conditions, Applicable in Metal Cutting Simulation
Fatigue Reliability Analysis of Pressure-Reducing Valve
Numerical Simulation of Intermediate Frequency Induced Heating Steel Plate with Finite Element Method
Study of Contact Temperature in Polishing Surfaces
Impact of Float Loss on the Project Costs
Effect of Surface Roughness on Slip Resistance of Rubber
A Novel Ultrasonic Motor Driver Based on Two Phase PWM Signals
Prediction of Processing Parameters of Laser Clad TiC/NiCrBSiC Coatings on Ti6Al4V by Finite Element Analysis
3D FEM Modeling of Ball End Milling of HSM H13 Die Steel with Cutter Inclination
The Deformation Analysis for Flank Milling of Thin-Walled Rectangle Plate Based on Flexible Force Model
An Hybrid Expert Fault Diagnosis System for CNC System
The Parametric Design of the External Transmission of Involute Beveloid Gear with Parallel Axes
Virtual Measurement of Machining Errors Based on Comparison Method of Three Models
Head Surface Reconstruction and Correction of Reverse Engineering Based on CATIA's
Finite Cylindrical Shell Element Method which Analyses Local Stability of Buried Stiffened-Penstock
Bio-Oil Production from Agricultural Residues in Northeast of Thailand by Fast Pyrolysis Technology
Research on Complex Product Design Method Based on Knowledge Model-Driven
The Control and Dynamical Analysis on Magnetic Bearing Flexible Rotor System Combining the Whirling with Swing
Application of Virtual Design and Manufacturing Techniques in Large Mine Elevator
Simulation and Design for Laser Protective Structures of Aluminum Material
Numerical Modeling of the Thermal Performance of 3D SiP with TSV
Numerical Analysis of Thermally-Induced Residual Stresses in Plasma Facing Components for Fusion Reactor
Research on Influence of Longitudinal Gradient to Rigid Base Composite Road of Cross River (Sea) Tunnel under Large Longitudinal Slope
A Multiple View Assembly Process Representation Based on Three Dimensional Models
Water Vapor Cooling Effects in Turning by Finite Element Modeling
Piston Stroke Design Optimization for Linear Compressor
Radiative Transfer Modeling and Monte Carlo Simulating of a New Digital Airborne Camera
Study on Friction Wear Properties of Vanadium-Chromium Surface Composite Layer under Dry Sliding Condition
Analytically Study the Ferrohydrostatic Pressure with FHD Bernoulli Theory
CFD-Based Multicomponent Model for Solidification of Casting Process
Theoretical Study of the Effect of (F, Li) Codoping on P-Type Tendency in ZnO
Transient Heat Conduction in Functionally Graded Materials by LT-MFS
The Thermal-Mechanical Coupled FEM Analysis on 3-Roll Continual Tube Rolling PQF Deformation Process
Influence of Process Parameters on Plastic Injection Molding of Automobile Interior Trim
An Image-Based Microscale Simulation of Thermal Residual Stresses in DSE Oxide Ceramic Composite
Study on the Vertical Extrusion Process of Ultra-Thick Seamless Steel Pipe
Numerical Analysis and Experimental Study on Dipper Handle of W1002 Excavator
Analysis about Vibration and Noise of Ceramic Electrical Spindle
Research on the New Compound Technology of Integral Seamless Housing of Rear Axle
Simulating Design of Magnetic Fluids Lubricating Unit Structure with Porous Material
Simulation on Pipe Joints Expansion Technology of NiTiNb Shape Memory Alloy
Finite Element Analysis for the Wind Resistance of the Tower of Wind Turbine
Study on Process Concentrating of a Certain Limonite Ore in Xinjiang
Modeling of Anchors in Gravel Formation Using Discrete Element Method
High Air Pressure in MQL Deep Hole Drilling Workpiece Temperature
Modelling the Grain Pattern and Orientation in Radiata Pine Boards
Modelling Knot Architecture in Radiata Pine Logs and Boards
On Resistance Calculation for Autonomous Underwater Vehicles
Modeling of Aluminum Extrusion Process Using Non-Orthogonal Block Structured Grids Based FVM
Effect of Rare Earth on Microstructure and Impact Toughness of Low Carbon Steel Based on Compact Strip Production Process
Effects of Heating Vents in a Tunnel-Type Dryer
The Effects of ZigBee Position with Different Hidden Layers in Back-Propagation Neural Network
Surface Grinding Force Model of Steel 55 Based on Undeformed Chip Thickness with CBN Electroplated Wheels
Spatial Cam Modeling and Analysis on Curvature of Conjugated Surfaces
Influence of Heating Models on Necking Deformation during Tube Extrusion Process
Experiment and Numerical Study of Annular Flow Entrainment Mechanism in Oil-Air Lubrication Pipe
Modeling and Analysis of Soft Contact in Robotic Grasping Using Bond Graph Methods
Dynamic Contact Analysis of the Offset Face Gear
Mechanical Properties of Commercially Pure Titanium during Hot Compression
The Wave-Load Analysis of the Offshore Wind Power Installation Vessel Based on Frequency-Domain Methods
Study on Controlled Release Properties of Slow-Release Pellets
Study on Angular Stiffness of Monolithic Flexible Joint
Analysis of Mechanical Properties of Pipes with Helical Reinforcement under Axial Tension
Application of the Arbitrary Lagrangian Eulerian Formalism to Stationary Roll Forming Simulations
Study on the Distribution Law of the Crashed Coal Fragmentation
Numerical Analysis on Impact Load of Elasto-Plastic Spherical Impact
Anslysis of the 5-m Heavy Plate Mill Stand Based on MSC.Marc Finite Element Method
Temperature Simulation in High-Speed Grinding by Using Deform-3D
Application of Support Vector Machine to Predicting Mechanical Properties of TC4
The Research on Friction Impacting on Drawing High-Strength Steel
Laser Anneal-Induced Effects on the NBTI Degradation of Advanced-Process 45nm High-K PMOS
Research on Performance Characteristic of Novel Fomichev Plug Used in Julong-Type Piercer
Study on the Burning Characteristics of Poor-Quality Anthracite in Supercritical W-Shaped Flame Boiler
Optimization Technique for Neural Network-Based Error Compensation in CNC Machining
Virtual Prototype Design and Dynamic Simulation of High-Dump Truck Based on ADAMS
Corrected Diffusion Model of Chloride in Concrete and its Engineering Application
The Thermal Response Investigation of Functionally Graded Material Plates
Coupled-Field Analysis of the Compliant Slider Mechanism with Rectangle Flexure Hinges Based on ANSYS
Influence of Guide Disc Postposition on Rolling Process of Accu-Roll Mill
Finite Element Analysis of RPC-Filled Steel Tube Stub Columns
Fatigue Analysis of Planet Carrier Based on Collaborative Simulation
Power Flow and Energy Sharing between an Oscillator and a Continuous Receiver Structure
Wear Mechanisms Approach to Ni-P Electroless Plating Applied to Hardening Engine Cylinder
Numerical Simulation of Different Clamping Modes on Stretch Forming Parts
3D Finite Element Modeling of the Machining of Ti6Al4V Alloys
Identification Algorithm for Instantaneous Engaged Cutting Edge Elements in Five-Axis Milling
Study on Metal Flow in Continuous Extrusion Cladding of Cable Aluminum Sheath Using FEM Analysis
Numerical Simulation of Polymer Flows in Coat-Hanger Die Using Wagner Constitutive Model
Numerical Simulation of Effect of Slip Conditions on PVC Co-Rotating Twin-Screw Extrusion
Mathematical Modeling and Modifying of Turntable’s Angle for 5/12 Automatic Numerical Controlling Bending Hoop Machine
Research on the Stress and Strain Field and Wall Thickness in Power Spinning of Ellipsoidal Heads with Variable Thickness
Contact Deformation and Abrasion Analysis of the Contact Region for Roller Linear Guide
Research of New Type PAN-Based Carbon Fiber Pre-Oxidization Furnace and its Temperature Controlling Property
Application of Digital Close Range Photogrammetry in Mechanical Three-Dimensional Modeling
Analysis on Combination of Different Wavelengths in Surface Roughness Measurement by Polychromatic Laser Speckle Patterns
Optimum Design Study of a Hydraulic Pressure Derrick Based on Stability
Temperature Field Modeling and Thermal Deformation Analysis of Turning and Milling Machining Center
3D FE Modeling of Three Rolls Cross Rolling Process of a Rotary Disk Part
Numerical Simulation of Flow Field in Cavitations-Impinging Stream Reactor
Simulation of Reflective Crack Propagation Path in Asphalt Overlay under the Partial Wheel Load
Temperature Stress Field Distribution Study of Asphalt Carrier’S Based on Rockwool Damaged
Numerical Analysis and Experimental Study on Temperature Field of Brake Disc during the Air-Cooling Process
A Numerical Study on the Uplift Behavior of Under-Reamed Anchors in Silty Sand
Modeling and Simulation of Gear Transmission System of Drive Axle with Romax
Design and Analyses of Roof Structure in Hangzhou Grand Theater
The Simulation of Polycrystalline Silicon Thin Film Deposition in PECVD System
New Geometry of Face-Gear with Curvilinear Shaped Teeth and Non-Zero Spiral Angle: Machining Mathematical Model Analysis and Simulation
Improving Pattern Recognition Rate by Gaussian Hopfield Neural Network
Calculation and Analysis on the Key Parameters of High-Speed Linear Motor Feed System
Optimization Design of Ride Comfort for Wind Blade Transporter
Numerical Analysis of Coupled Finite Element with Meshfree in Bulging Process of Sheet Elastic Flexible-Die Forming
Study on Thermal Stresses of Cylinder Liner’s Fabrication Using FEM Analysis
Space Robot Self-Assembling Dynamics and Control
Modal Analysis of Self-Repairing Composite Gear Based on ANSYS
Computer Simulation of Fracture Damage for Large-Diameter Percussive Drill
Residual Stresses Distribution Calculation of the Cu-Cr-Zr Alloy Contact Wire Used in High-Speed Electrical Railway
Minimizing the Warpage and Sink Mark Depth in Injection-Molded Thermoplastics
Numerical Study on the Large Deformation of Silicone Rubber Foams Based on Random Cell Models
Axial Spread Evolution during Hot Rolling of Large Rings with Different Sizes
The Numerical Simulation about Second Dendrite Spacing of Low Pressure Casting Automobile Aluminum Magnesium Alloy Wheel
Nonlinear Fitting Technology of 7-Parameter Cross-WLF Viscosity Model
Analysis for Effect of Key Parts on Precision of High Precision Machine Center
Study on Ultrasonic Surface Rolling Process Using FEM Analysis
Optimal Clamping Scheme of Thin-Walled Cavity Workpiece
Integrated Simulation of Injection Molding Process and Mold Deformation Using the Uniform Mesh
Solder Joints Reliability Assessment for Stacked CSP Module Based on Flexible Circuit Printed Board
The Overview of Modeling the Thermo-Mechanical Three Dimensional Friction Stir Welding Process
Mechanism Analysis of Magnetostrictive Turning for Piston Skirt Processing
Modeling of Pillowing Stress in Corroded Lap Joints
Investigation on the Numerical Simulation of Hot Stamping of Advanced High Strength Steels
Advanced Interactive Device in Virtual Knee Arthroscopic Surgery
Optimization Research on Workpiece Clamping Deformation Using Genetic Algorithm and Finite Element Method
Finite Element Analysis on Contact of Wheel and High Manganese Steel Crossing
Research on Rapid Prototyping Machine of Ceramic Parts and the Machine Control System
Design of New Hydraulic Lifts for Construction Machinery Assembly
3D Finite Element Modeling for Particle-Reinforced Polymer Composites for Wind Energy Application
The Numerical Simulation of the Water Jet in Hydroentanglement
Study on Electrical Resistance Tomography Simulation of Carbon Fiber Smart Layers on Two-Dimensional Curved Surface
Discrete Jerk-Limited Feedrate Planning for NURBS Curves Interpolation
Numerical Simulation Analysis of Deformation in TIG Welding of I-Steel
Cellular Automata Simulation of Grain Growth under Consideration of Zener Pinning
Expansion Order Effect on Residual Contact Pressure of Tube to Tubesheet Joint by Hydraulic Expansion
The Estimation of TP Chromatic Aberration by Using Neural Network
Analysis on Internal Gear Stress for Design Parameters
Virtual Simulation of Embedded-Vane Rotary Compressor
CAD Design and Mechanical Test on inside Porous Parts
Numerical Simulation of Plate Bender Bending Process
The Static and Dynamic Characteristics Study of Aluminum Tank Semitrailer
Research on Thermal Error Modeling and Simulation Technique of CNC Based on Stepped Approximation Method
The Definition and Solution to the Correlation in District Collaborative Design
Discussion on Convergence Issues in ABAQUS/Standard while Carrying Out Damage and Fracture Analysis
Study on the Effects of the Geometrical Parameter of Twist Drill on the Drilling Performance of Stainless Steel
Flow of Finite Element Analysis of Metal Powder in Medal Injection Mold Runner
Three-Dimensional Finite Element Analysis in Cutting Temperature for High Speed Milling of Titanium Alloys
Research on Dynamic Fatigue Strength Criterion of BTA Deep Hole Boring Bar for Consideration Vortex Surrounded by Internal and External Cutting Fluid
Study on Thermal Placement Optimization of Embedded MCM
Determination of Flow Stress Based on Cutting Simulation and Optimization
Study on the Mechanism of the Impactor-Bit-Rock Interaction Using 3D FEM Analysis
Flow Features Analysis of Throttle Notches of Proportional Direct Valve
Dependence of Structural Stress on Indium Bump Sizes in 8×8 InSb Focal Plane Array
A Method of the Inverse Evaluation for Heat Transfer Coefficient between Al-Cu Alloys and Cooling Water
Simulation of Multiscale Time and Space in Fracture Process of Three-Point-Bending Concrete Beam with Offset Notch
Debonding Analysis between FRP-Concrete Interface with a Linear Elastic Fracture Mechanics Approach
Error Analysis of Ladder Shaft Turning and the Research of NC Compensation
Study of Precision Formation on New Synchronizing Ring of Heavy-Duty Truck Based on Computer Numerical Simulation
Numerical Simulation Analysis of Spinning Forming Process of Tubeless Steel Wheel on Technical Parameters
Numerical Optimization Design on the Parameters of Double Ellipsoid Welding Heat Source
Limit Bearing Capacity Analysis of Structure System with Different Types of Element Using Elastic Modulus Reduction Method
Research on Classification Method of Multi-Circuit Pump Critical Parts Based on Fuzzy Theory
Experimental Analysis and Performance Evaluation of Fu Feng Highway Prestressed Concrete Bridge after Strengthening in China
Theoretical Analysis of Designed Internal Forces of Jiamusi Highway Prestressed Concrete Bridge before Strengthening in China
Numerical Simulation of the Viscous Flow for the Supersonic Jet Element
Calculation of Static Safety Coefficient about Loess Cave
Optimal Design of Plastic Injection Mould Gating System
Analysis of Metal Flow and Deformation Features during Continuous Tube Rolling Process with Mandrel Mill
Influence of Wall Thickness Fluctuation of Pierced Shell on Continuous Tube Rolling Process of Semi-Floating Mandrel Mill
Elastic-Plasticity Analyze of Bending Deflection on Profiled Bar Roller Straightening
Multi-Dimensional Numerical Simulation of Emission Characteristics in DI Diesel Engine
Numeral Simulation of a New Forming Process: Stretch Forming Combined with Roll Forming
The Study of the Model for the Formation Process of GMAW
Influence of Turbulence Controller on Flow Mode of Molten Steel in Tundish
Study on Creep Deformation of Reactor Coolant Pump Rotor-Can during Vacuum Hot Bulge Forming Process
Imitative Farmland Random Vibration Analysis on Frame of Blueberry Harvesters
Numerical Modelling of Shape Evolution of Tubular Preform in Spray Forming Process
Research on the Application of Expansion Ratio Analysis for Die-Face Optimal Design in Sheet Metal Forming
3 Materials Forming
Mechanism for In Situ Iron Nanoparticles Formed during Copper Alloy Solidification
The Synthesis of Mg-Zn-Al LDH and the Sustained-Release Properties of Theophylline Intercalated LDH
Investigation of Coupling Efficiency by Plastic Deformation of Tube Packaging for Thin-Film-Based Passive Optical Components
Microstructures Development in Al-5Fe and Al-5Fe-3Y Alloys Solidified at Different Cooling Rate
Virtual Disassembly Simulation of Varying Target Component for Complex Products
Explosive Compaction of Metallic Glass Particles Reinforced Aluminium Matrix Composites
Investigation of Mold Temperature Affecting on Shrinkage of Rapid Heat Cycle Molding Plastic Part
Design Milling Parameters Optimization System Based on Thin-Walled Parts
Study on Machinability and Polishing Performance of 1CrMn2MoVTiB Non-Quenched and Tempered Plastic Mould Steel
Analysis for Fracture Behavior of Compactor Grinding Tooth Forging Die Based on Finite Element Method
Influence of Segmented Blank Holder for Rectangular Box Drawing
Consolidation of HLW into Mineral-Like Materials by the SHS
Superplasticity-Like Behavior, Microstructures and Deformation Mechanism Map in Superlight Mg-6Li-3Zn Alloy
An Upper-Bound Analysis of Closed Multi-Ram Forging of Rod
Application of Advanced Cooling Control System for Plate Mill
Research on Flow Stress of Magnesium Alloy Sheet under Warm and High Strain Rate Forming Condition
Injection Mould Parametric Reusable 3D Parts Libraries of Development
Maintenance Process Simulation Model Considered Sharing Resource and its Application
Numerical Simulation on Thixo-Forging of Magnesium Matrix Composite
Numerical Simulation and Experimental Study of Limit Drawing Ratio of Steel Sheets
Survey and Trend of Rapid Heat Cycle Molding
Effect of Position between Upper Die and Workpiece on Cold Rotary Forging
Optimal Design of the Guide Mechanism of Vertical Ring Rolling Mill
Influence of Cross Section Shapes of Preformed Blade Body for Final Forging Formability Based on Numerical Simulation
The Model of Thermal Deformation Resistance for P20 Steel
Analysis and Control of Car Door Inner Panel Forming Fracture Based on Experience Knowledge and Numerical Simulation
PSO Algorithm Based Task Allocation in Dynamic Virtual Enterprise
Research on Workshop Scheduling of SMT Product Manufacturing System
Development of an Indirect Solid Freeform Fabrication Process Based on Stereolithography and Gelcasting for Ceramic Casting Molds
Effect of Drive Roll Rotation Speed on Ring Rolling Process
Stray Light Elimination Methods for Laser Communication System with Submarine
COF Measurement of Tubes by Hydraulic Bulging with Radial Crushing
Test and Analysis of Friction Torque for Wind Turbine Pitch Bearing
Numerical Simulation of Microstructure Evolution of Hot Forging
Microstructure of AZ31 Magnesium Alloy Produced by the CONFORM Process under Different Extrusion Wheel Velocities
The Mechanism and Influence Factors of Struvite Precipitation for the Removal of Ammonium Nitrogen
Real-Time Data-Based Fault Diagnosis System
Study of Solutions and Causes for Scrap Jumping up in High-Speed Stamping
Diagnosis System of Manufacturing Equipment Based on Structure-Fault Tree
Finite Element Simulation and Experimental Study of the Effect of Cone Parameter on Thickness Distribution in Hydroforming of Conical-Cylindrical Cups
Test Research of Stamping Property for 500MPa Grade Super Steel Sheet
Study on the Large Module Spur Gear Cold Forming Process by Means of Numerical Simulation
Punch Die of 385 Diesel Part Design Based on CAE Technology
Blank Thickness Effects on Rolling Force in Hot Rolling of Titanium Alloy Large Rings
Finite Element Analysis of Bulging Forming for Sheet Metal with Bottom Compression Drawing Method
The Decomposition Mechanism of Titania Film with Nanotube Structure
A Fault Diagnosis of Suck Rod Pumping System Based on Wavelet Packet and RBF Network
Thickness Indirect Measurement Method for Direct Pulling Pilot Cold Rolling Mill
The Investigation of Multi-Stage Sheet Metal Stamping Process for Deep Drawing
Study on Regulation of Rotation Speeds and Tangent Slip in Radial-Axial Ring Rolling Process
A New Axial Upsetting Process for Large Ingots with Large Ratio of Height to Diameter
Influences of Material Thickness on Hole-Flange Forming Limitation
Preparation and Characteristics of Expanded Graphite
Function Analysis of Injection Molding
Analysis of Draw Bead Geometry on Wall Thinning and Concave/Convex Feature in Rectangular Deep Drawn Parts
Microstructure and IR Studies of Ag Ions-Zeolite
Design of Drawing Compound Die for Side Hole Part
Research of Numerical Simulation Method in Two Pass Deep Drawing Forming of Sheet Metal
Predict and Analysis of Fold in Steering Knuckle Forging Based on Numerical Simulation
Design and Realization of Automatic Testing System for Hydraulic Pump
Novel Carbon Source in Manufacture of LiFePO₄/C
Analysis and Study of Damage of Forging Cracks
Research on Ball Spinning Forming of Superalloy Inconel 718 Thin-Walled Tube
A New Hybrid Particle Swarm Optimization for Solving Flow Shop Scheduling Problem with Fuzzy due Date
Processing Parameters Optimization for Stagger Spinning of Trapezoidal Inner Gear
An Artificial Immune Algorithm Based Intelligent Monitoring System in Grinding Process
A New Flaw Identification Model of Ultrasonic Signals Based on EMD and Possibility SVM
Numerical Simulation and Process Optimization for Multi-Stage Forming of Wheel Centre Disc
Warm Compacting Behavior of Pure Titanium Powders
Research on Warm-Cold Precision Forging Process and Numerical Simulation for Spherical Housing
Effect of Geometry Parameters on Cross-Sectional Distortion of Thin-Walled Rectangular Tube in Rotary-Draw Bending Process
The Study of Parameters on CK67 Steel Sheet Spring-Back in L-Dies Bending Processes
A Single Stage Hot Forging Process of Alternator Poles
Effects of Preform on Thickness Distribution of Hydroformed Y-Shaped Tube
An On-Line Multiparametric Water Quality Monitoring System Based on Visible Spectrophotometry
Finite Element Analysis for the Influence of the Clamping Holder Corner on the Bulging of Thin Metal Shells
LY11 Alloy Flat Bar Produced by Continuous Semisolid Extruding Extending Forming Process
Control on Head Displacement of H-Beam in Rolling Process
The Experimental Study on the Microstructure of SS400 Steel with Traveling Magnetic Induced Rapid Tempering Process
Grain Refinement in Constrained Groove Pressing of 7050 Aluminum Alloy
Effect of Magnetic Field on Air Film Continuous Casting
Study on Cold Extrusion Process and Die for Vehicle Sleeve Gear with Spline
Effect of Severe Plastic Deformation on the Characteristics of a PM Aluminum Alloy
The System Design of Spiral Drum Based on Parameterized Modules
A Study on Dynamic Recrystallization Behaviours of AZ80 Magnesium Alloy
Blank Optimization of Sheet Metal Forming Based on Response Surface Methodology
Embedded Web-Based Remote Monitoring System of the Motor
Study on Metallography and Properties of WC Cast-Infiltration on Carbon Steel Surface by Expendable Pattern Casting
An Investigation on Effect of Residual Stress on Springback Behavior of High Strength Steel in U-Bending Process
Effect of Rare Earth (RE) La on Solid Solution of Second Phase Particle and Austenite Grain Growth in Steel Containing High Niobium
Research on a Compiler for NC System Based on PC
The Analysis of Core Shift in Injection Mold and its Optimization Based on AMI
Thickness Distribution in Conical Parts Formed by Hydroforming and Conventional Multistage Deep Drawing Processes
Investigation on the Elongation of Tailor Welded Blanks with Different Thickness
Numerical Simulation of Deep-Drawing Processes of Square Cup under Bilateral Constrained Conditions
The Effect of Purity of Zirconium Material on Mechanical Properties and Microstructure of Zr-Based Bulk Metallic Glass
Experimental Study of Hot Extrusion Micro Gear of Brass H62
CAD Software Development for the Continuous Flexible Forming Process
Numerical Simulation and Verification of Multi-Operation Sheet Forming Process for Stamping Parts of Spiral Step Surface
Co-Deposition of Binary Particles during Slip Casting Process
Effects of Continuous Extrusion on Microstructure Evolution and Property Characteristics of Brass Alloy
Consititutive Modeling for Auto-Body Steel Sheet Incorporating Strain Rate and Temperature
The Desing and Research of the Interior Sprue Gate of Die-Casting Mould
Study on Direct Hot Isostatic Pressing Technology for Superalloy Inconel 625
Effect of Molding Parameters on the Interface Morphology of Metal Co-Injection Molding
Fabrication and Bending Strength of Al/SiC Composites with High Volume Fraction of Reinforcement by Combining Powder Injection Molding and Pressure Infiltration
Development of Experimental Method to Improve Sheet Metal Formability by Transverse Normal Stress
Study on Springback Compensation in Multi-Point Forming
A New Type Multi-Mode Linear Ultrasonic Motor
Effect of the Thickness Ratio on the Failure Modes of Tailor Welded Blanks
Study on the Metal Flow in Power Spinning Process of Parts with Transverse Inner Rib
Thickness Demarcation Circle of Double-Cone Tube during Hydroforming
Analysis of Strip Shape in Cold Rolling of Thin Strip
Cell Direct Assembly Technology Adopting Hybrid of Gelatin-Based Hydrogels
Numerical Simulation on Efficient Spinning Technology Based on Multi-Point Adjusting Principle
Determination of Optimal Microminiature Powder Injection Molding Parameters by Taguchi Approach
Investigation of High Strength Steel for Automotive Roll-Forming Parts
Influence of Operation Conditions and Ambient Temperature on Performance of Gas Turbine Power Plant
4 Materials Machining
The Research of a Drill Bit for Underground Casing Drilling in Radial Water Jet Penetration Perforation
Investigation of Airflow Field in Grinding Zone Based on FLUENT
Experimental Research on the Dry Electrostatic Cooling Assisted Machining for Hardened Steel
Drawing Properties of Modified Polyamide 6 Fibers
Contrast Studies on the Solar Drying Schemes of Eucalypt Timber
Tool-Path Generation for Conical Groove of Cylindrical Cams by Small-Sized Cutting Tools
Tool Path Design Methods for High Efficiency Die Cavity Machining with CAD/CAM Technology
Application of Taguchi Method in the Optimization of Cutting Parameters for Turning Metal Matrix Composite
Experimental Study and Theory Prediction on Adiabatic Shear Critical Conditions of Hardened AISI 1045 Steel
Cutting Test and Analysis of the Emulsified Deep-Hole Cutting Fluid
MQL Technology Including the BTA Deep Hole Drilling Machining
The Effect of Two-Step Aging on the Electrical Properties of 7075 Aluminum Alloy
Comparative Study on Force in Milling T10 Hardened Steel with Different Machining Parameters
Influence on Cutting Forces and Vibration in High Speed Machining Pocket Corner
The Experiment Research of High-Pressured Cauldron’s Anti-Hydration
Study on Decreasing Processing Cost of Special-Shaped End Socket
Nano-Process of SiC Ceramics by Molecular Simulation
An Ultrasonic Elliptical Vibration Burnishing Process for Reducing Surface Roughness
Error Analysis and Simulation of Gear Form Grinding
Application and Development of High-Efficiency Abrasive Finishing
A Modified Isoscallop Height Toolpath Planning Method for Generating Smooth Paths Based on Curve Fitting Method
Machining Characteristics of EDM Using Gas Media
A New Effective Hybrid Optimization Strategy for Rectangular Packing Problem
Cutting Temperature and Tool Wear in Internal Spray-Cooling Vibration Drilling of Superalloys
Study of High-Speed Machining Parameters on Nickel-Based Alloy GH2132
The Analysis of High-Speed Shearing Mechanic and Cross-Section about Sheet Metal
Effect of the Surfactant Concentration on Sinking Electric Discharge Machining Performance with Water-in-Oil Emulsion as Dielectric
Study on the Deep-Hole Honing of Cavity of Oxygen-Free Copper
Research on Higher Frequency, Short Pulses and Assisted Magnetic Field Electrochemical Machining
Optimization for Tooth Profile of Assembled Cathode Based on Comsol
Development of Cutting Tools with Built-in Thin Film Thermocouple for Monitoring Machining Temperature
Research on Several Machining Processes of the up-down Abnormity Hole by WEDM
Electrochemical Micro-Drilling with Ultra-Short Pulses
Experimental Study of the Critical Process Parameters of Machining of Stainless Steels Using the Taguchi Approach
Experiment Study of Oil-Air Lubrication on Cooling of Turning Tools
Grinding Performance of Porous Diamond Wheels on Different Materials
Research on the Vibration Tapping Performance of Particle Reinforced Aluminum Matrix Composites
Study on Cutting Process of Manual SHS Cutting Technology
Wear of Uncoated HSS Tools in Drilling Difficult-to-Machine Materials with Water Vapor as Coolant and Lubricant
Study on the Size Shrinking and Shape Changing of Solid-State Nanopores
5 Welding & Joining
Ice Accretion of Glaze Loads Model on Wires of Power Transmission Lines
Study of Flux on Wetting Behavior of Sn-Zn Lead-Free Solders
Ice Accretion Cause and Mechanism of Glaze on Wires of Power Transmission Lines
Acoustic Signal Recognition Based on Time Series Model
Diffusion Bonding of ZrB₂ Ceramic and Al-Sn-Mg Alloys at Atmosphere
Microstructure and Mechanical Properties of Aluminum/Stainless Steel Joints Welded by Different Weld Heat Input
Study on Intelligent Analysis of the Causes of SMT Solder Joint Defects Based on Fuzzy Neural Network
ICAI Realization Method for Parallel Robot Instruction
Influence of Friction Stir Welding Process on the Weld Formation and Tensile Strength of Titanium and Aluminum Dissimilar Alloys Welded Joint
Analysis of the Hardness and Elastic Modulus Distribution in a High Strength Steel Welded Joint by Nanoindentation
The Thinking of Using Multimedia Technology to Improve the Quality of Mathematics Teaching
Enhancement of Load-Carrying Capacity of Undermatching Butt Joints by Weld Shape Design
Innovation for Joining by Forming of Magnesium Alloy Based on TRIZ
Application and Research on Corrosion and Scale Inhibitor WJF-6 in Seawater Circulation Cooling Water
Research and Prospects of Improving the Fatigue Life of Wleded Train Bogie Structure
Research about the Effect of Ultrasonic Impact on the Fatigue Life of Butt Weld Joint of 16MnR Steel
Study on Nonlinear Multiple Regression Modeling of Nugget Morphology for Unequal-Thickness Dissimilar Steel Welding
The Effect of Carbon Content in Filling Alloys on η Phase Formation in the Interface Zone of YG30 and Weld Bead
Inverse Analysis of Material Parameters of Multiple Foam Layers Based on Artificial Neural Network
Simulation on the Thermal Behavior in Vacuum Electron Beam Welding of Magnesium Alloy
Microstructure and Mechanical Property of (Sn-9Zn0.05Ce)xBi Solder
Monitoring of Effect of Electrode Force on Resistance Spot Weld Quality Using Electrode Displacement Method
Study on the Microstructure and Properties of Zl114a Friction Stir Welded Joint with Forced Cooling
Microstructural Characterizations of the 316 Stainless Steel-Alumina Joining by a Modified Moly-Manganese Process and Brazing
Effect of Cooling Condition on Microstructure and Mechanical Properties in Large Line Energy Welded Joints of Ultra-Fine Grained Steel
Numerical Analysis of Controlling Welding Deformation of the Wall Plate of Large Cylindrical Structure by Pre-Stress Method
Welded Joint Nonpenetration and Slag Inclusion Evaluation Based on MMM Signal Characteristic
Effect of Electrode Force Change on Spot Weld Quality of AHSS Using Servo Gun
Quality Estimation of the Resistance Spot Welding Based on Hopfield Network
Research of Surfacing Technology on Continuous Casting Roller
Effect of Welding Heat Circulation on the Microstructure and Mechanical Properties of 500MPa Ultra Fine Grained Steel in HAZ
Formation and Growth of Intermetallic Compound Layers at Interface of Solder/Copper Alloys for Lead Frame
Quasi-Static Analysis of Beam Described by Fractional Derivative Kelvin Viscoelastic Model under Lateral Load
Effects of Wire Rotating Frequency on Metal Transfer Process in Rotating Arc Narrow Gap Horizontal GMAW
Microstructures and Properties of Thick Plate Butt Joints of Al Alloy 6082 Prepared with FSW
Review of Dynamic Reliability Analysis on Wind Turbine
Research of Material Flow for Friction Stir Welding Using Smooth Pins Based on Plasticine Analog
Study on the Legs Connection Technology of Jack-up Drilling Platform
The Structure and Mechanical Properties of Turtle Shell and Biomimetic
Numerical Simulation of Punching Bonding Based on AutoForm
Stress Distribution of Bonded Joint with Rubbery Adhesives
Study on the Numerical Simulation of the Resistance Spot Welding Process of Magnesium Alloy
Study on Defect of 304 Stainless Steel Industrial Condensation Board in CO₂ Laser Welding
A Rapid Process for Fabricating Microfluidic Devices with a Low-Cost UV Curable Resin
3-D Finite Element Analysis on a Fillet Weld Sealing Joint in the High-Pressure Hydrogenation Heat Exchanger
Mechanical Properties on the Welded Connection of Pipe and Hollow Spheres Joints
Solid-State Dye-Sensitized Solar Cells Based on ZnO Nanorod Arrays by Low-Temperature Chemical Bath Deposition
Research of Thermal Anchor Attachment for ITER Magnet Supports
Effects of Ultrasonic Power on Bonding Strength of Anisotropic Conductive Film Joint in Chip-on-Glass Assembly
Prediction and Application of Welding Residual Deformation of Steel Sheets
Fabrication of Fuel Reforming Catalytic Coatings for Hydrogen Production by Cold Spray Technology
Automatic Hyperbaric Welding of Sub-Sea Pipelines Repair
Manual Self-Propagating High-Temperature Synthesis Welding of 45 Steel
Effects of Rare Earth Elements Erbium and Cerium on the Properties of Hardfacing Alloy
Vertical Vibration of Pile Groups in Soil Described by Fractional Derivative Viscoelastic Model
Improving Low-Ag Pb-Free Solder Performance by Adding Bi, Ni Elements
A Welding Method for Carbon Nanotubes to Metal
Effect of Magnetic Field on Microstructure and Properties of Magnesium Alloy Welded Joint with GTAW
The Effects of Grit Particle Size on Frictional Characteristics of Automotive Braking System
The Effect of Plate-Plate Butt Welding Stress Distribution on the Welding Deformation
Semi-Solid Stirring Brazing of SiCp/A356 Composites and Aluminum Alloy in Air
Influences of Latent Heat and Butt Gap on Temperature Field and Melting Pool Shape in Laser Brazing of Beryllium
The Effect of the Welding Thermal Cycle on Heat Affected Zone Hardening for 500MPa Grade Screw Thread Steel
Resistance Spot Welding between Aluminum Alloy and Low-Carbon Steel
Study on a Cu-Fe Weld Metal of Manual SHS Welding
Optimal Design for Fe-Cr-C Hardfacing Alloys with Anti-Wearing
Prediction and Control of Welding Distortion in "U" Rib Orthotropic Plate
An Experimental Investigation on Railway Adhesion Properties under Water Medium and Dry Condition Respectively
Nonuniformity of Mechanical Property in the Weld Zone of Friction Stir Welded 7050 Aluminum Alloy Joint
Effects of Thermo-Mechanical Control Process on the Microstructure and Properties of the Welded Joints of ERW OCTG
Effect of Linear Cutting on Corrosion Behaviors in 304 Stainless Steel
Research and Numerical Simulation of Contactor of High-Frequency Welding Device
Study of the Effect of Active Fluxes in Gas Tungsten Arc Welding
Experimental Study on the Effects of Rotational Speed and Attack Angle on High Density Polyethylene (HDPE) Friction Stir Welded Butt Joints
Preparation of Grafting Starch by HRP Catalyst and it’s Application in Leather Tanning Process
Study on the Influence of Reduction in Area on Fatigue Life of Bearing Steel Using Statistics of Extreme Values
Resistance Microwelding of Au/Ni-Plated Phosphor Bronze Sheet to Insulated Cu Wire
The Mechanical Properties of Al-30Si Alloy by Friction Stir Processing
Design of Hi3510-Based Embedded Wireless Video Monitoring System
Applications of Piezoelectric Materials
Investigation on Joining Method Replacement for Vehicle Body’s Assembly
Study on Effectiveness of Releasing Weld Residual Stress by Ultrasonic Impact Method
Calculation Method of Butt-Welded Connection of Steel Structure Post Fire
Desirability-Based Performance Optimization of Wear-Resistant Coatings by HVOF Sprayed WC-Co Experiments
On the Hardfacing Performance Optimization after Plasma Transfer Arc Experiments
Development and Analysis of Robust Anti-Wear Design of a-C:Zr Films by Taguchi Methods
Modeling Weld Formation Mechanism of Automated Submerged Horizontal Position Arc Welding
6 Laser Processing Technology
Reconstruction of Human Skeleton Model Based on Selective Laser Sintering
Effects of Powder Characteristics on Selective Laser Melting of 316L Stainless Steel Powder
Effects of the Processing Parameters on the Forming Quality of Stainless Steel Parts by Selective Laser Melting
The Effect of Heat Treatment on Mechanical Properties of Pulsed Nd:YAG Welded Thin Ti6Al4V
Investigation of Microstructure and Mechanical Properties of Pulsating Laser Cladding Coating
Study the Application of Laser Welding in the Automotive Transmission Parts
Investigation on Inconel 625 Alloy Thin-Walled Parts by Direct Laser Fabrication
Study on Microstructure and Properties of Slab Crystallizer by Laser Coaxial Cladding Strengthening
Influence of Recoating Parameters on Thickness of Resin Layer in High-Resolution Stereolithography System
Laser Cutting Layout Based on Particle Swarm Optimization and Graphic Interference Detecting
Experiment and Simulation of TC4 Alloy Rods Subject to Laser Shock Processing
Experimental Investigation on Laser Pretreatment of Optical Films
Microstructure and Corrosion Resistance of 40Cr Steel by Laser Melting
Dry Sliding Friction and Wear Behavior of WC/WC-Ni Particles Laser Cladding Reinforced by Nano TiC on Mold Steel Surface
Research on Defects of Titanium Alloy Laser Rapid Forming
Fabrication of In Situ TiC Reinforement Ti Matirx Wear-Resistant and its Wearing Performance at 500°C
Simulation of Two-Dimensional Transverse Laser Cooling of Cesium Beam from Pyramidal Magneto-Optical Trap Atom Funnel
Research on Leveling Technology of Tailored Laser Welding
Photodetection Technology Based on Laser Coding Emission
Research Progress of Laser Assisted Liquid Compound Machining
Investigated on Residual Stress Field of Aluminum Alloy 7050T7451 with Fastener Holes by Laser Shock Processing
Ablation Characteristic Analysis of Short Pulse Laser Processing Composite Materials
Characteristics of CO₂ Laser Welded TRIP Steel Sheet
Laser Cooling Mechanisms of Chromium Atomic Beam
Numerical Investigation of Dual Heating in Laser Micro-Adjustment of Actuators
Effects of Sheet Thickness on Residual Stress Distribution by Laser Shock Processing of 7050-T7451 Aluminum Alloy
7 Casting and Solidification
The Effect of Casting Speed on Sump Shape and Ingot Surface of HDC Casting 7075 Aluminum Alloy Ingot
Study of the Grain Refinement Technology by Electromagnetic Stirring for IN100 Superalloy Vacuum Investment Casting
Effects of Low Frequency Electromagnetic Field on Segregation Layer during Hot-Top Casting of Aluminium Alloy
Microstructure Formation during Unidirectionally Solidified Pb-Bi-Sn Tenary Quasi-Peritectic Alloy
Prepartion of Semisolid AM60 Alloy by Novel Self-Inoculation Method
Formation of Structure during the Nonequilibrium Solidification of Zn-5wt%Al Alloy
A Physical Explanation of Plateau in Velocity vs. Undercooling Curve Using a Undercooled Dendrite Growth Model
Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast AZ91 Magnesium Alloy
Heat Treatment and Morphology Study of Mg-Zn-Y Quasicrystal Alloys
Performance Comparison and Mechanism Analysis of Several No-Bake Sand
Metastable Phase in Undercooled Fe-Co Alloy
Preparation and Characterization of Self-Dispersal Nanometer Carbon Black Pigment
Microstructure and Microsegregation in Directionally Solidified FeCoNiCrAl High Entropy Alloy
Kiss-Point Position Control of Solidification Layer and Process Optimization for Twin-Roll Casting of Magnesium Alloys
Experimental Research on the Semi-Solid Formability of 7A09 Aluminum Alloy Impeller
Segregation of C, P and Mn in Rapid Solidified Carbon Steels
Study on Defects of A356 Aluminum Alloy Wheel
Effect of Ce₂S₃ Powder Addition on Morphology of Graphite in Cast Iron
Analyses of Interfacial Thermal Stresses for DLC/WC-Co
Simulation of Facet Dendritic Shape of Isothermal Alloy in a Forced Flow by Phase Field Method
Defects Analysis and Improvement for Electricmotorcar Aluminum Alloy Wheel by Gravity Casting
Effects of Melt Treatment on Dendrite Coherency of A357 Alloy
Effect of Cooling Rate on Microstructure and Properties of Heat-Treated Fe₃Al Intermetallics
Numerical Simulation Study of Consumable Electrode Melting Process in Electro-Slag Remelting Ingots
Numerical Simulation of Filling and Solidification Process for Low Superheat Billet Continuous Casting
Optimization of the Ultrasonic Wave-Assisted Extraction Condition of Peanut Protein Isolate
Ti₅₀Ni₂₅Cu₂₅ Amorphous Alloy Ribbons Progress
Microwave-Assisted Leaching Vanadium from Stone Coal
Effect of Cooling Condition on Zr-Rich Core Formation and Grain Size in Mg Alloy
Research of Synthesizing Biodiesel from Suaeda Salsa by Ultrasonic-Assisted Transesterification
The Study on Numerical Simulation of Tailor Welded Blanks on Square Cup Stamping
Study of Heat Transfer of Steel Solidification Process
Casting Solidification Behavior of Bimuth in Free-Cutting Copper Alloy
Analyzing Age Hardening Behaviors of an Al-Si-Mg Cast Alloy
Numerical Simulation on Splat-Quenched CuCr25 Alloys
Microstructure Changes and Computer Simulation of K4169 Superalloy Using Chemical Grain Refinement Casting
Effect of Aluminium Powder on the Hot Mechanical Properties of Corundum-Silicon Nitride Composites
Microstructural Refinement Process of Pure Magnesium by Pulse Magnetic Field Treatment
Research on Microstructure and Mechanical Properties of High Boron Cast Steel
Preparation of SiC-Low Chromium Cast Iron Composite Material by Cast-Infiltration
Analysis and Precaution of the Hard Spots in Die-Casting Parts of Aluminum Alloy
Effect of Rare Earth on Microstructure and Property of Refining Impure-Copper
Three-Dimensional Numerical Simulation of Metal Flow in the Initial Stage of a Twin-Roll Strip Casting Process
Interrelation between Microstructure and Mechanical Properties of Heavy Section Ductile Iron Casting
Effects of Superposed Field on Solidification Microstructure of Al-7wt%Si Alloy
Smelting Technology in Electric Furnace for Thick and Large Gray Iron with High Strength
Numerical Simulation and Technology Optimization of Rear Oil Seal Bearing Die Castings Based on ProCAST
Effects of Spinning on Microstructure and Mechanical Properties of A356 Alloy
Effect of Magnetostatic Field on Microstructure of 5005 Aluminum Alloy Sheet by Roll-Casting
Effects of Submerged Heater on the Vertical Bridgman Crystal Growth
Experimental Modal Analysis in Casting Production Applications
Study on Unidirectional Solidification of Slab Ingot for Special Heavy Plate
Clad Strip Casting Using a Twin Roll Casters
8 Precision Manufacturing Technology and Measurements
Development of Basalt Fiber Reinforced Wood-Plastic Composite Materials
Parameter Calibration Method Based on Screw Theory for Articulated Coordinate Measuring Arm
Sapphire-SiO₂ Solid-Phase Reaction of Polishing Proving Research
Experimental Study on the Surface Micro-Geometrical Characteristics of Quenched Steel in Ultrasonic Assisted Turning
Thermal Deformation Prediction in Machine Tool Model by Using Transfer Functions with Time Delay
Soft UV-Imprinting Using Gasbag Pressure Mechanism for Side-Direction and Non-Planar Substrate
Experimental Evaluation of System Performance for a Machine Tool Cooler Using Inverter Driven Control
A New Method of Making Grating - Etched by SPM
Experimental Measurement of Friction Coefficient Applied to HSM Modeling
Cutting Mechanism and Model for Cutting Al/SiCp Composites
Development of an Ultrasonic-Vibration Microforming Apparatus
Study on Accurate Tool Positioning Technology for Noncircular Turning System
Ultrasonic Grinding Three-Dimensional Trajectory Simulation and Experimental Study
Investigation into High-Speed/Super-High Speed Grinding
Research on CMP Characteristics Attribute to Groove Size
The Installation Eccentricity Error Compensation Technology for Gear Based on CNC Gear Measuring Center
A Novel Sensorless Control of a Two-Axis Planar Motion Stage for Precision Positioning
Piezoelectric Behavior Based on Mixing-Doped in Lead Zirconate Titanate Ceramics and Application
Micro Leverage Modeling, Simulation and Optimization for Micromechanical Silicon Oscillating Accelerometer
Technology of Tooth Pitch Deviations Measurement for Master Gears of Precision Grade 1
Effect of Operated Parameters on Removal Rate and Surface Roughness in Precision Atomization Ultra-Polishing Process of Copper Surface
Application of PPR to Thermal Error Modeling of an INDEX-G200 Turning Center
Study on Ultrasonic Cavitation Mechanism of Honing
The Effect of Speed Matching on the CMP Uniformity
Preparation and its Silica Wafer CMP Performance of Cationic Polyelectrolyte Modified Benzoguanamine Formaldehyde/SiO₂ Composite Abrasives Slurry
The Performance Parameters Measurement of Longitudinal Piezoelectric Transducer and Experimental Study
Billet Design Optimization of Helical Gears Precision Forging Based on Response Surface Method and FEM Simulation
Shaping Principle in Hobbing and Analysis on Errors of Involute Gear Tooth Surfaces
A Vision Alignment Method Based on Improved Genetic Algorithm for IC Packaging
A Monitoring and Wireless Transmission System on the Machining Tool
A New Method for Detecting the Diameter and Spatial Location of Tiny Through-Hole
Simulation for Aberration of Chromium Atomic Beam Focusing and Deposition
Study on the Inspection Method of Gas Valve’s External Taper Screw Thread Based on Image Domain
Signal Sampling and Accuracy Analysis of Large Gear’s Angular Displacement Measuring its Deviation On-Machine
9 Other Related Topics
The Numerical Simulation of Decarburization of 60Si2CrVA in Heat Treatment by DEFORM-3D and the Research of Practical Application
Improved Genetic Algorithm Based on Operation Order Matrix Encoding for Job Shop Scheduling Problem
Effect of the HTP to X80 Ferrite Steel Structure and Mechanical Properties
Effect of Heat Treatment on the Microstructures and Mechanical Properties in AZ31 Magnesium Alloy Processed by Continuous Rheo-Extrusion
Study on Creep Properties of SiCp/AZ61 Composites
An Empirical Surface Roughness Model of Titanium Alloys Cut with Abrasive Water Jet
Wire Electrical Discharge Machining – High Speed VS Abrasive Waterjet - A Case Study
Research on Curvature of Tooth Flank of Gleason Spiral Bevel Gears
Corrosion Behaviors of X80 Pipeline Steel in Different Simulated Alkaline Soil Solution
The Structure and Electrochemical Properties of BDD Deposited on Ti Substrate by MWCVD
Research on the Deformation Area Materials’ Stress and Contour Surface’s Forming Mechanism of Closed Extruding Fine-Blanking
Research on an Electromagnetic Driven Bi-Disc Compensator for Rotor Auto-Balancing
Effect of Si Content on Microstructure and Wear Resistance of Cold Roll Steel with 5%Cr
Virtual Manufacturing Research of Steam Turbine Blade Technology Based on UG and VERICUT Software
Analysis of Reliability and Operation Characteristic of Composite Insulator
Effectiveness of Low Frequency Electromagnetic Shielding of Concrete with the Functionally Primitives Materials of Short Carbon Fibers and Graphite
Research of E-Business Security Based on SOAP Protocol
Effect of Zn²⁺ Doping on Luminescence Properties of Red-Emitting Phosphors CaMoO₄:Eu³⁺
Design of a New Multi-Channel High-Low Pressure Micro-Ejection System
The Life-Span Prediction of Reinforcing Bars Corrosion of Self-Compacting Concrete
Effects of the Copper Addition on the Precipitation of Al-Mg-Si Alloys
The Numerical Simulation Analysis of Fracture Properties and Restoring Force Characteristics of Bare Base of Steel Column
A Simple Synthesis of Mesoporous Silica Hollow Microspheres by Fast Hydrolysis and Condensation of Tetraethyl Orthosilicate
Influences of Moisture Expansion on Motion Errors of Granite Hydrostatic Guideways
Photoresponsive Properties of a Azobenzene-Based Polyacrylamide Copolymer
Test Device for Research of Heat Conduction in Plasticization Processes of Natural Materials
Meshing Model in Gear with Timing Belt
Study on Sequential Compliance Method Influenced by Shape Parameter of Weibull Distribution
The Reliability of Enlarging the Cross-Section in Reinforcing the Frame Construction Buildings
Study on Performances and its Structural Designing of the High-Speed CNC Lathe Epoxy Resin Concrete Bed
Research on Properties of Al₂O₃-Based Cermets Inert Anode
Research on Creep Fracture Mechanics Parameter by Reference Stress Method
Tribological Performance of Iron Ore Tailings Enhanced Resin Composites for Automotive Brake Linings
Efficacy Rack Angle on the Orthogonal Machining of AA5083 in the Cutting Force
Optimal Design of Cathode’ Working Tooth in ECM for Rifle Based Visual C++
Research on the Application of the Prediction of the Expressway Traffic Flow Based on the Neural Network with Genetic Algorithm
Elastic-Plastic Finite Element Simulation of Bulge Forming Process Using a Variable Cross-Section Solid Bulging Mold
Static Analysis of Cable-Stayed Suspension Bridge under Concrete Shrinkage and Creep
Energy Dissipation in Timing Belts Made from Composite Materials
Experimental and Numerical Machining of AA 5083
Development and Trend of Ultrasonic Techniques in On-Line Detection for Strip and Plate’s Internal Defects
Characteristics of In-Ge-Sb-Sn-Te Thin Film Used for Phase Change Optical Recording Media
Reliability Analysis for Structure System with the Local Dented Plate
Functional Steel Hardness and Wear Improving on a Basis of Phenomena of Grain Boundaries Phase Transition
Process Calculation of Producing Stainless Steel Crude Melts by the Chromium Ore Smelting Reduction in a Converter
Prediction Model of End-Point Carbon Content for BOF Based on LM BP Neural Network
Three Dimensions Construction Model and Finite Element Analysis of Hydraulic Support and Relevant Model
Hydraulic Support Model Test Load Equipment and its Hydraulic Control System
Fabrication of SiCp/ZL101 Composites Substrate with Near-Net-Shape
The Influence of B₂O₃ on the Microstructures and Properties of CaO-B₂O₃-SiO₂-Al₂O₃ Glass-Ceramics (α-Al₂O₃) System
Effect of High Magnetic Field on Phase Transformation of 7055 Alloy during Homogenization
Study on the Solidification Structures of Al-Fe-Si Alloy under DC and AC Magnetic Fields

Les mer

Produktdetaljer

ISBN

9783037850312

Publisert

2011-04-20

Utgiver

Trans Tech Publications Ltd; Trans Tech Publications Ltd

Vekt

8000 gr

Høyde

240 mm

Bredde

170 mm

Dybde

224 mm

Aldersnivå

P, 06

Språk

Product language

Engelsk

Format

Product format

Heftet

Antall sider

4482

Redaktør

Manufacturing Process Technology

Produktdetaljer

Manufacturing Process Technology

Relaterte produkter

Produktdetaljer

Relaterte produkter