Produktdetaljer
ISBN
9780878493630
Publisert
2009-03-02
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1200 gr
Høyde
240 mm
Bredde
170 mm
Dybde
54 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1074
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The present volume comprises a collection of peer-reviewed papers covering innovations and practical experience regarding manufacturing automation education; current and developing manufacturing automation; advanced manufacturing technology including flexible manufacturing, virtual manufacturing, Green manufacturing and re-manufacturing, and web-based manufacturing; computer-integrated manufacturing systems; CAD/CAE/CAPP/CAM; product life-cycle management (PLM); computerized numerical control systems and flexible manufacturing systems; industrial robotics; process monitoring and quality control of manufacturing systems; group technology (GT); PDM, ERP, logistics and supply chains.
Les mer
<p>Selected, peer reviewed papers from the 13th Conference of China University Society on Manufacturing Automation, July 22-24, 2008, Harbin, China</p>
- Preface
- The Prediction Model of Cutting Forces Based on Johnson-Cook’s Flow Stress Model
- Adaptive Compensation of Spatial Contour Error Based on Neural Networks in Three-Axis Machining
- Operation Model for Green Manufacturing in the Electronic Industry
- Study on the Property and Driver Mode of High-Speed Dot-Matrix Pulse Jet Generator
- Dynamic Numerical Computation and Optimum Analysis of Robot Chassis Using Finite Element Method
- Application of Partial Least Squares Neural Network in Thermal Error Modeling for CNC Machine Tool
- Design and Implement of Automatic Plastic Gasoline Tank Water-Cooling Equipment and its Control System
- The Analysis and Research about Temperature and Thermal Error Measurement Technology of CNC Machine Tool
- Material Removal Model and Numerical Analysis of Fluid Magnetic Abrasives Finishing
- Development of a CNC System for Multi-Axis EDM and its Realization
- Study on Minipore Drilling to Stainless Steel 1Cr18Ni9Ti
- Study on Swept-Modeling with 3D Solid Based on ObjectARX
- Simulation of Cutting Force in Turning Machining Process on CK7815 NC Lathe
- Application of Wavelet Analysis in the Virtual Measurement of Roundness/Cylindricalness for Shaft-Like Components
- Study on Automatic Assembly Design of Product Based on UG
- Research of Film Precise Potentiometer Linearity Automatically Measuring and Amending System
- NC Lathe Redesign and Green Estimation
- Finite Element Modelling and Analysis of Cutting-Direction Burr Formation
- Measurement and Simulation of Automotive Eddy Current Retarder Based on Virtual Reality
- Sensorless Detection and Diagnosis Method for Induction Motor and its Driven Equipment
- Research of Hydraulic Jack Leakage Diagnosis Emulation Base on Wavelet /AMEsim
- A Mechanics Analysis of Formation and Expansion of Fatigue Crack in Laser Cladding on Repeated Impact Load
- A Hydraulic Analogue Model and Analysis of a Micropump Considering the Diaphragm Stiffness
- Application of LabVIEW in Flame Cutter NC System
- Study for Laser Cladding of Ni60A on Copper Substrate by Laser
- Study on Simulation System of Cut-In Disrepair for the Milling Insert with 3D Complex Groove
- Transformation of Force-Linear Displacement and Moment-Angular Displacement on Different Measurement of Spring-Tubes Stiffness
- Study on Measurement of Melting Process of Molten Pool Formed by Laser Scanning Mirror
- Experimental Study on the Big Nano-Ceramic Plates under Two-Dimensional Ultrasonic Polishing
- Motion Analysis and Simulation of Complex Curved Surface WEDM System
- Research on Dynamic Performance of Milling System for Parallel Indexing Cam Contour Milling
- CAD Application on Manufacture of Forming Shoulder for Packaging Machines
- Research on Electrode Wear Prediction and Compensation On-Line Technology for Micro EDM Application
- Study on Preparation and Properties of Environment-Friendly Cutting Fluid
- Research on Ontology-Based Knowledge Acquisition and Reuse for Fixture Design
- Simulation Research on Effect of Diametral Clearance of Spool Valve to Valve Orifice Discharge Characteristic
- Fundamental Experiment of Laminated Templates Electro-Deposition in Manufacturing Metal Part
- Study on the Key Techniques of Remote Monitoring System for Large-Scale Equipments
- Research on Manipulator Positioning Based on Stereo Vision in Virtual Environment
- Design of Automatic Continuity Processes of Burnishing and Electrochemical Finishing on Cylinder Surface
- An Intelligent Optimization Approach of Feedrate Scheduling Based on Hybrid Simulation Models
- A Comprehensive Evaluation Method of Manufacturing Process Resources and Environmental Attributes and its Application
- Dynamic Modeling and Optimized Energy Distribution of a Novel Amphibian Legged Robot
- Experiment and Analysis on Near-Dry Cutting System in Titanium Alloy Deep-Hole Drilling
- Research of Automated Process Planning Based on 3D Feature Component Model
- Study on Automatic Measurement of Valve Orifice Characteristic Based on Pneumatic Flow Method
- Theoretical Simulation of Temperature Field of Coaxial Powder Stream in Laser Cladding
- A Hybrid Genetic Algorithm for Hybrid Flow Shop Scheduling with Load Balancing
- Three-D Modeling and Feature Collection of Box-Like Components Based on CSG Fundamental Geometric Element Set and Topological Relationship Tree
- On Three Axes Ganged NC Grinding Machine with Ganged Revolving Spindle
- Research on the Relationship between Indenter Tip Radius and Hardness with a Self-Designed Nanohardness Test Device
- Tool Posture Optimization Subjected to the Rigidity of Multi-Axis Machine Tool
- Telerobot Control System with Petri Net-Based Multi-Control Modes Transfer in Due Time
- The Study on the Key Technology of Turbine Blade CNC Belt Grinding Machine
- Construction of Exterior Features for Tissue Engineering Scaffold with Defect Bone
- Heating Current Control in Electric Hot Machining Based on Conservation Law of Optimum Cutting Temperature
- Numerical Simulation of Driven and Pressure Flow in Compound Shaped Part of Co-Extrusion Process of Polymer with Metal Insert
- Study on Dynamic Characteristics and Simulation of Plane Grinding System under Two-Dimensional Ultrasonic Vibration
- Research on Open CNC System Based on Quantum Framework
- Development of a NC Servo System Based on Fuzzy Adaptive Control
- Imageware and Pro/E Based Reverse Engineering Techniques for Drawbar in Heavy-Duty Railway Freight Cars
- Development of Automatic Measurement Platform for Servo Valve Nozzle Volume
- A Formal Verification for Web Service Composition Based on CCS
- Wheel Velocity Analysis of a Rover with Six Wheels Independently Driven on Uneven Terrain
- Analysis of Wavelet Algorithm of Redundancy Denoising for Hydraulic System Signal
- Research about Automatic Ultrasonic Testing Technology for the Ring Welding Line of Middling and Small Modulus Gear
- Microcosmic Observing and Analysing of the Chips Formation from Precision Hard Cutting GCr15 Bearing Steel
- NURBS Interpolator Based on Dynamic Property of the Machine Tool
- Study on Interpolating Algorithm of Hybrid Machine Tool
- FE Simulation of Vacuum Hot Bulge Forming Process of BT20 Ti-Alloy Cylindrical Workpiece
- A New Position-Finding Method for Machining Huge Workpiece
- 3-D Outline Tracking Intelligence Control Technique and Application-Automobile Outline Parameter Measurement Machine
- Green and Intelligent: Electromechanical-Hydraulic Integrated Clamping Device Based on Thermal Sensitive Material
- Research into the New Process and Machine for Auto-Bending of Mine-Used Tri-Ring Chains
- Design of Key Parameters on Differential Velocity Vane Pump of Eccentric-Noncircular Gears
- Model of Distributed Collaborative Design System for Supporting PLM
- Theoretical Research on Polishing Free-Form Surface with Magnetic Abrasive Finishing
- Study on Forming Quality Control of Bending Tube in Power Station Boiler
- Real Time Defects of Beer Bottle Detection System Based on DSP
- Process Quality Collaborative Tracing-Back and Close Loop in CIMS
- Development on CAD Software about Slewing Bearing
- Study on Demonstration City Constration of MIE and Informatization of Medium and Small Enterprises
- Effect of Focusing Status on Dimension Measurement Accuracy in Micro Measurement System Based on CCD
- Research on Key Technology of Hydrostatic Motorized Spindle and its Designing
- Numerical Simulation and Experimental Measurement of Velocity Field of Powder Fluid in Laser Manufacturing
- Simultaneous Measurement of Torsion and Curvature Using Curvature Fiber Optic Sensor
- Research on the Method of Client Customization Design
- Optimum Design and Fairness of the Surfaces for Mold with Three Revolving Positions
- The Application Research of Virtual Prototyping Technology in the Design of Oil Field Pumping Units
- Visual Simulation Study of Pick Loads on Continuous Miner
- AX-MV6 Robot Bevel Cuts the Workstation System the Applied
- Research on New Architecture for Open CNC System Based on Linux
- Research on Simulation of Rotary Burrs NC Grinding
- A Method of Auto-Focusing Based on Fuzzy-Control
- Research on Rotary Disc-Type MRF Dampers with Nonhomogeneous Magnetic Fields
- Residual Stress Prediction by Adaptive Neuro-Fuzzy System in Milling Aluminum Alloy
- Research and Development of Collaborative Design System Based on WEB
- Situation and Solution of Chinese Manufacturing Enterprise Informationization
- Flexible Fixture Based on Magneto-Rheological Fluid
- Realization on Fractal Interpolation of Non-Rule Geometry
- Design and Establishment of Platform of Tripedal Industrial Robots
- Application of Chaos PSO Algorithm in the Decelerator Optimization
- Preparations and Properties of Solid Lubricants Coating on High-Speed Steel Tools
- Study on a Knowledge-Reuse-Based Rapid Product Design Process
- Influence of the Air-Gap Changes on the Performance of Linear Induction Motor
- The Design and Simulation of Micro Gas Journal Bearing for Micro Gas Turbine Engine
- High Speed Milling Stability of Cutter with Indexable Inserts
- Numerical Simulation of Liquid-Solid Two-Phase Flows on Internal and Outside Flow Field in High Pressure Abrasive Water Jet Cutting Nozzle
- Research for Disposable Design Concept and its Method
- Stochastic Fractal Modeling and Process Planning for Machining Using Two-Dimensional Iterated Function System
- Study of Double-Motor Anti-Backlash of Heavy NC Machine Tool C Axis System
- Performance Analysis on Capacitance Micromechanical Comb-Finger Accelerometer
- Construction of a New Virtual Environment System for Assembly and Training of Complex Products
- Study on Location Simulation for Picking Manipulator in Virtual Environment Based on Information Fusion of Multi-Sensor
- Cellular Automata Method for Reconstruction of Complex Groove of Milling Insert
- Comprehensively Digital Descriptions Based on the Features of CAD and CAPP for the Typical Shaft-Like Component
- The Experimental Investigation of Face Grinding of Al2024/SiCp with Electroplated Diamond Wheel
- 3D Reconstruction from Orthographic Image and Optimization Processing of NC Machining for Reconstructed Part
- Dry WEDM in Improving HS-WEDMed Surface Quality
- Research on Modeling of Bionic-Bone Tissue Scaffold for RPM
- Study on the Web-Service Platform Architecture for Bio-Manufacturing
- A Reliability Analysis Method Based on Execution Scenario for Modular NC Software
- The Monitoring and Analysis on the State of Deep Hole Drilling Based on Multi-Sensor Combined Detection Technology
- Research and Applications of Fuzzy-PID Control on NC Machine
- Surface Integrity Research on Barrel Finishing of Crankshafts’ Part
- Product Rapid Design for Customer Individual Requirements
- An Open Architecture Control System for Parallel Kinematic Machines Based on Multi-DSP Parallel Procession
- The Fault Tree Analysis of Striking Cylinder of Air Compressor Based on Grey Relation Theory
- Ant Colony Optimization for Neural Network
- The Study on the Linking-Up of Free-Form Surface Fiber Placement Track Based on Mesh Creating
- Study on Fluid Process Measurement Technology
- Measurement of Temperature Field in Laser Molten Pool by CCD Based on DSP
- Modeling and Simulation of Milling Force in Virtual Numerical Control Milling Process
- The Reconfigurable Embedded NC System Based on FPGA
- Study on the Method for Measuring the Deflection Angle of a New Type Gyroscope Rotor
- Experimental Study on Intelligent Monitoring of Diamond Grinding Wheel Wear
- Experimental Studies of Cutting Temperature during High-Speed Milling of Aerospace Aluminum
- Parametric Design on 3D Complex Groove of Turning Inserts Using Pro/Engineer
- Research on Numerical Control Program Based on Fuzzy Neural Network
- Study on Fuzzy-Neural Network for Inverted Plasma Arc Cutting Power Supply
- A Fast Algorithm to Compute B-Splines and its Application in Curve Fitting
- Hole Filling Algorithm in Surface Reconstruction Based on Radial Basis Function Neural Network
- Scheduling of Multiple Projects with Resource Constraints Using Genetic Algorithms
- Finite Element Analysis of Thrust Bearing Magnetic Field in 22KW Spindle
- Research on Optimum Design and Simulation of Gear Reducer in Electric Steering Engine
- Study on Path Planning for Industrial Robots in Free-Form Surfaces Polishing
- Motion Planning of Wheeled Mobile Robot Driven by Differential Wheels
- An Adjustment Algorithm of the GA Representation for Injection Mold Manufacturing Optimized Scheduling with Operation Constraint
- Design and Study on Power Supply for Giant Magnetostrictive Accurate-Motion Actuator
- Optimization of High Speed Milling Cutter Based on Critical Cutting Speed
- Research on Optimization and Emulate Planning of Automobile Assembly Process
- Modeling and Simulation of a Micro-Actuator with Long-Travel
- Workflow Modeling for Cooperative Production Development Based upon Advanced Petri Net
- The Key Technology Research for Vision Inspecting Instrument of Steel Ball Surface Defect
- Study on Parameter Optimization about NC Cutting of Marine Ship Diesel Engine and Cutting Database System
- The Design and Analysis of Equilibrium Machine for Brake Dish Based on Virtual Kind Machine Technique
- The Development of Automatic Metric Pump Flow Regulation Instrument
- The Research on Micro-Drive Device of Reflective Lens Frame with High Precision and Big Caliber
- Distortion Prediction of Aerospace Monolithic Components due to Milling Process
- Network Architecture Based on 3-D Digital Design and Manufacture for Scaled Enterprise Ally
- Research on Temperature Field under Regular Gradient Heat Source of Milling Insert with Complex Groove Using Cellular Automata Algorithm
- Research on the Net Transparent Bridge Technology Based Single NC Machine’s Network Integration
- A Simulation-Based Methodology for Lot-Size Optimization
- Research and Development on Individual Virtual Intelligent Vehicles
- Finite Element Analysis of the Effects of Coated Tool on High Speed Orthogonal Machining
- Research on Integrated System of Information and Function Based on Virtual Prototyping Technology
- Precision Model of Predicting FDM Rapid Prototype Based on BP Neural Network
- Research on the Service-Oriented Price Quotation Method and System for Rapid Prototyping
- Research for Data Exchange Technology of Heterogeneous Database Based on XML
- Mechanism Analysis of Ultrasonic Machining Based on Finite Element Method
- CPLD Application in the Development of the Pin Selection Controller in Knitting Machine
- Research on Examination and Approval Flow in Concurrent Process Planning System
- Thermal Imaging Experimental Research on Temperature Field for Milling Insert
- Finite Element Simulation of Orthogonal Cutting of Nodular Cast Iron
- Discussion on Image Contour Extracting Method of Homogeneous Objects
- Research of Detector for Surface Defects of Steel Ball Based on Improved PID Control
- Real-Time Monitoring System of Cutting Process Based on Cutting Temperature
- Study on Integration of CAx/PDM Based on Web Services
- Design and Development of Integrated System on CAD/CAE /CAPP for Tube-Bending in Power Plants Boiler
- A Data Hub Model for Simulation-Based Ship Design
- Cracking Mechanism and Retrofit Design of Governing Stage Blades for a Steam Turbine
- Study on the Dynamics Control of Industrial Robot Modeling Based on Spatial Operator Algebra Theory
- Elastic-Plastic Finite Element Analysis of the Effect of the Compressive Loading on Fatigue Crack Tip Parameters
- Adaptive Ant Colony Algorithm Used in WSNs Routing for Information Acquisition of Manufacturing Process
- Study on the Orthogonal Cutting Process of Al7050T7451 with Uncoated and Coated Tools
- Optimization Design of Planar Five-Bar Parallel Robot's Bar Length
- Designing of Mechanical Structure and Translocating Clamp in Flexible Joint Stiffness Measuring System
- CAD/CAPP Research and Practice of Special Welding Shell Parts
- Design on the System of Brain-Computer Interface Driving Neural Prosthesis Hand
- Key Techniques and Advances of Grinding/Milling Spiral Flutes on NC Machines with Multi-Axis Linkage
- Study on Torque Sensor System Used in Torque Rheometer Based on Virtual Prototyping Simulation
- Vision-Based Hand Tracking and Gesture Recognition for Augmented Assembly System
- Digital Image Processing of CCD Measuring Temperature Field in Coaxial Powder Stream of Laser Cladding
- Finite Element Simulation on Face Milling of Austenitic Stainless Steel with Chamfered Tools
- A Platform Establishment Method for Auto Driving Simulation Based on EON Studio
Les mer
Produktdetaljer
ISBN
9780878493630
Publisert
2009-03-02
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1200 gr
Høyde
240 mm
Bredde
170 mm
Dybde
54 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1074