Produktdetaljer
ISBN
9783037855881
Publisert
2013-03-13
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
200 gr
Høyde
240 mm
Bredde
170 mm
Dybde
44 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
888
The volume contains selected, peer reviewed papers from the 2nd International Conference on Innovation Manufacturing and Engineering Management (IMEM2012), December 14-16, 2012, Chongqing, China.
Chapter 1: Manufacturing and Engineering Management;
Chapter 2: General Mechanical Engineering;
Chapter 3: Mechanical Transmission, Vibration and Noise;
Chapter 4: Electrical and Electronics Engineering;
Chapter 5: Materials and Raw for Manufacturing;
Chapter 6: Sensors and Intelligent Instrument;
Chapter 7: Detection and Diagnosis;
Chapter 8: Control and Information Engineering;
Chapter 9: Methods and Algorithms of Research and Designing.
Les mer
Selected, peer reviewed papers from the 2nd International Conference on Innovation Manufacturing and Engineering Management (IMEM 2012), December 14-16, 2012, Chongqing, China
- Preface, Committees and Reviewers
- Chapter 1: Manufacturing and Engineering Management
- Design of Skid-Mounted LCNG Fueling Station for Vehicle
- Innovation Application Research on the Computer Technology in Machinery Manufacturing
- Study on Technology Innovation Process Integration Based on Technological Growth Curve
- Research and Practice on the ‘Case-Run through Type’ Teaching Model of Machinery Manufacturing
- The Inverse Optimal Allocation Model of Manufacturing Resource for Small and Medium-Sized Manufacturing Enterprises in Grid Environment
- Evaluation Research of the Control Effectiveness of Underground Defensive Projects Thermal and Humidity Environment
- Research on Multi-Segment and Multi-Class Seat Inventory Control with Overbooking
- Research on Power Life Cycle Asset Management Mode and MEE Comprehensive Evaluation Mode
- The Research and Development of Water Jet Technology
- Analysis on Two Impelled-System Model in Structure of Forestry Industry
- A New Study of China's Advanced Water Injection Technology for Low-Permeability Reservoirs
- Early Warning System of Power Grid’s Running Risk of Hebi Power Supply
- IoT-Based 4PL: Prospects and Business Models
- Development Status of Hydrogen Energy and Application Prospects
- Application of Lithium-Ion Battery Technology to the New Energy Vehicles
- Research and Development of Fuel-Saving Technology of Automobile Gasoline Engine
- A Study on Contractual Relationship Handle and Control in Constructional Engineering Disputes
- CPSO-SVM Based Petroleum Demand Prediction
- RFID-Driven Graphical Method for Describing the Time-Sensitive State and Position Changes of WIP Material Flows in a Job-Shop Floor
- Chapter 2: General Mechanical Engineering
- The Study on Waveform Sets Transmission for Multistatic Radar
- A Study on Elevator of Li-Ion Power Battery Formation Equipment
- Study on the Intake Wind Performance Experiment of the Pipe with High Pressure Spray
- Improved Artificial Potential Field Method Manipulator Inverse Kinematics
- Study on Wear Mechanism of Chromium Carbide Coating Reinforced Cast Iron Cylinder Sleeve
- Use of Engine Waste Heat Energy Utilization Rate of Engine is Improved
- Dynamic Modeling and Motion Characteristic Analysis of Spherical Robot
- Effect of the Friction Coefficient on Large Strain Extrusion Machining
- 3D Numerical Simulation on the Variable Swirl Intake Process of Diesel Engine
- Study on Error Analysis of Parallel Machine Tool Based on Monte-Carlo Method
- A Study on Process of Modular Li-Ion Power Batteries
- Numerical Simulation and Improvement of Diesel Pneumatic Motor Inlet Duct
- Fractional Order Generalized Electro-Magneto-Thermo-Elasticity with Magnetic Monopoles and Geometrical Nonlinearity
- Effect of Stabilizing Fins on the Indexes of Ship Manoeuvrability
- Chapter 3: Mechanical Transmission, Vibration and Noise
- Simulation Analysis of Spiral Bevel Gear Tooth Surface Generation Based on VERICUT
- Analysis of Helicopter Main Reducer Planetary Gear Contact Strength
- Research of the Seismic Wave Data Processing Based on the Wavelet Transform
- De-Noising Method of Acoustic Emission Signal for Rolling Bearing Based on Adaptive Wavelet Correlation Analysis
- Finite Element Analysis for Vibration Characteristic on Gear Rotors
- Single Spur Gear Reducer Optimization Design Mathematical Modeling
- Study on the Simulation of Radial Tire Vibration Noise
- The Virtual Prototype Design of the Micro Gear Box Mapping Stacker Base on Solid-Works
- The Research of Balance Suspension Failure Form
- Research and Study of Gear Class Components Parametrization Based on AutoCAD
- Tribological Properties of MoS2 Thin Coatings under Liquid Lubricating
- Analysis on the Stiffness of Leaf Spring Based on ABAQUS
- Development of Engine Vibration Test Virtual Instrument
- Semi-Discrete Analytical Solution of Lumped Mass Finite Element Method for the Longitudinal Vibrations of an Elastic Bar
- Discuss BMW Automatic Transmission Work Principle and Fault Handling
- Realizing Method of MATLAB Software for Fault Diagnosis of Freight Bearings
- Improved K-Means Clustering Method Based on Complex Network for Rolling Bearing Fault Diagnosis
- Analysis and Manufacture of Skew Bevel Gears with Spherical Involute
- Fault Diagnosis of Rolling Bearing Based on Feature-Level Fusion Method
- An Improved HHT Method and its Application in Fault Diagnosis of Roller Bearing
- Chapter 4: Electrical and Electronics Engineering
- The Application of Hybridized DC-DC Converters in the Power Supply System of Spacecraft
- Power System Based on Multi-Agent Technology
- Global Robust Terminal Sliding Mode Control for PMLSM Servo System
- Capacitor Optimization of the Single-Phase Capacitor-Run Induction Motor
- Starting Performance Analysis of Line-Start Permanent Magnet Synchronous Motor with Novel Rotor Structure
- Design on Digital PWM Inverter Power Based on SA4828
- Fault Diagnosis of Cascaded Converter Based on Wavelet Packet RBF Neural Network
- Performance Characterization of the Novel Topology for High-Frequency Isolation Bi-Directional DC/DC Converter
- Voltage-Mode Multi-Valued Schmitt Trigger with Neuron-MOS Transistors
- Parameters Optimization Design of Four-Switch Three-Phase Shunt Active Power Filter
- Research on Current Signal Acquisition of Soft-Start Controller
- Five Level Photovoltaic Grid-Connected Inverter Based on Repetitive and PI Control
- Medium Voltage Distribution Network Voltage Grade Sequence Comprehensive Evaluation Based on Gray/Ahp
- Calculation of 3D Airgap Magnetic Field Distribution of an Axial Flux Permanent Magnet Motor
- Design and Simulation of the New Three-Phase Voltage Source PWM Rectifier
- Research on How to Send Ladder Derived by Linear Electric Motors
- Research on Temperature Field of Variable Frequency Motor
- The Simulation and Realization Methods of Partial Discharge Signal in Gas Insulated Substation
- A New Approach of Determination of Comprehensive Weight in Condition Assessment of Power Transformer
- Novel Low-Pass Microwave Filter Based on Rectangular Ring DGS
- Research and Design of One New Type of Satellite Antenna Unit
- Research and Design for 2D-FFT Processor Based on FPGA
- Study of Harmonic Suppression Method Based on the Class D Amplifier
- Study on Preventing Override Trip System for High-Voltage Power Grid of Coal Mine Underground Based on the EtherCAT
- Study on Fluctuation Reason of DC-Side Voltage of Active Power Filter and Stability Control
- Analysis of a Novel Isolated Input-Series and Output-Series Full-Bridge Bidirectional DC/DC Converter
- Simulation Research on Multisim10-Based Microcontroller
- Fault Diagnosis of Motor Rotor Based on Fuzzy C-Means Clustering Analysis
- Flux and Speed Estimation Based on the Extended State Observer for Speed Sensorless Control of Indirect Field Oriented Induction Motor Drives
- Simulation Research of Vector Control System Based on the Improved MRAS Speed Sensorless
- Research of Calibration Instrument of Multi-Site Single-Phase Energy Meter
- Adaptive Filter with Multiple-Scale Decomposition Rotor Broken Bars in Induction Fault Diagnosis
- Study on the Characteristics of Asynchronous Motor Vector Control
- Research on Cascade Multilevel Inverter Control Strategy
- The Self-Control Device Design of the High Tension Overhead Live Working Dor Accurate Pinpoint
- Application of Active Disturbance Rejection Cotroller in Sensorless Vector Control System of PMSM
- The Hardware System Design of PMSM Controller Based on DSP2812
- Chapter 5: Materials and Raw for Manufacturing
- Investigation of Thermomechanical Behaviors of Epoxy Shape Memory Polymers by Molecular Dynamics Simulation
- Narrow-Band-Gap Polymer Photovoltaic Materials Synthesis and Photovoltaic Research
- ICP-AES Determination of the Four Trace Elements (Al, Ca, P, Ti) in the Ferrosilicon
- Association between Genetic Polymorphisms of 5,10-Methylenetetrahydrofolate Reductase and Cytokinesis-Block Micronucleus in Peripheral Blood Lymphocyte among 1,3-Butadiene Workers
- Study on the Geological Conditions of Uranium Mineralization in Guojiaping
- Synthesis of Hyperbranched Polymeric Bactericides
- Analysis and Research of the Ductility Performance of the Steel Reinforced Concrete Structure Based on the Filling Technology
- The Analysis of the Built-in Electric Field and the Migration of Carries in Thermal/Electric-Field Poled Fused Silica
- Chapter 6: Sensors and Intelligent Instrument
- A Received Signal Strength Indication Adaptive Algorithm for Wireless Sensor Network
- Study on Displacement Measurement for Induced Strain Field Based on Digital Speckle Pattern Interferometry Method
- Coupling Efficiency Analysis of Different Top Coupling Grating for Quantum Well Infrared Photo-Detector
- Based on Base Station Control Management Protocol in Heterogeneous Sensor Network
- Research of MOEMS Pressure Sensor
- A Design of Carbon Oxide Sensor in Mine
- Research on Micro Inertial Sensor Error Compensation Technology in SINS
- Application of an Improved DV-Hop Algorithm on the Wireless Sensor Network of the Mine Shaft
- Hoist Positioning System Based on the Acceleration Sensor
- Automatic Counting System Based on MCU
- Authentication Scheme between the Vehicle Alarm with Remote Control and Mobile Phone
- Research on Micromechanical Machining Technology of Micro-Flow Sensor
- Improved Vision-Based Algorithm for Unmanned Aerial Vehicles Autonomous Landing
- Study on the Hardware Initialization of Embedded System
- The Research about Image Enhancement of the Cylindrical Workpiece Based on Matlab
- The System Development on Automatic Programming of Numerical Control Lathe Based on AutoCAD
- High Security Design of 2.4GHz Remote Controller in Car Anti-Theft
- Modeling of In-Body Propagation Characterization for 2.5/3.5 GHz Implantable Devices Applications
- CT Based Three Dimensional Geometric Model of Cervical Spine
- Chapter 7: Detection and Diagnosis
- Study on the Artificial Intelligence Diagnosis System of the Coal and Gas Outburst Risk Level
- Precision Parts Parallelism Error on-Line Detection Based on the CCD Imaging System
- Analysis in the Mercedes-Benz Automotive Fault Diagnosis
- Application Study of Metal Magnetic Memory Testing in the Q345E Steel Weld Inspection
- The Research of Effects on the Performance Parameters of the Quadrupole Mass Filter
- Part Roundness Errors Evaluation Based on Modified Simplex Method
- Experimental Study on Monitoring Steel Beam Local Corrosion Based on EMI Technique
- Chapter 8: Control and Information Engineering
- Study on Predictive Control Algorithm of Reactor Temperature
- Study on Robust Control Technology of Opto-Electronic Tracking System
- Parking Guidance Control System Based on Internet of Things
- Study on the Composition and Control of Robot Structure
- Design of Three-Tank Liquid Level PID Control System Based on Virtual Instrument
- Research of Fuzzy Self-Turning PID Control Based on FPGA
- Fuzzy Adaptive PID Control for Parallel Machine Tool
- Intelligent Shading Control System Based on the Lonworks Bus
- Study on Control Strategy for Regenerative Braking of Electric Vehicles
- Design and Implementation of Remote Monitoring System for Drinking Water Quality in Country
- The Fuzzy PID Control of Resistance Furnace Temperature System Based on Genetic Algorithm
- Adaptive Fuzzy Sliding Mode Control for Uncertain Inverted Pendulum System
- Application of Fuzzy Neural Network PID Controller in Networked Control Systems
- Capacitance-Based Design of the Tap Water Flow Control Device
- Stable Adaptive Control Strategy in Thrust System of Shield Machine
- Design of Direct-Control Hydraulic Cylinder Speed Control System Base on High-Speed On-Off Valve
- Research on S-Curve Speed Control for Step Motor Based on the MCU
- Design of Collecting and Processing System of GPS Information Based on ARM and Linux
- Indoor Open Spaces Precious Device Regulatory System Design Based on Internet of Things
- The Application of Programmable Controller to Chip Design
- Model Validation Method for Simulation Experiment System of Complex Electromagnetic Environment
- Temperature Control System Design of Rapid Thermal Cycle Injection Moulds with Electric Heating
- An Improved Anti-Collision Algorithm in RFID System
- A Collaborative Drawing Model Based on RMI
- Anti-Collision Algorithm Analysis of ALOHA-Based RFID
- A Study of the Linear Quadratic Type’s Optimal Control over the Micro-Vibration of Coupled-Pendulums with the External Force
- A Hardware Design of Fish Tank Intelligent Purification System
- Design of Parameter Adaptive Fuzzy Controller for the Planar Double Inverted Pendulum
- Hybrid Electric Vehicle Energy Management and Control Based on Battery Energy Balance
- Research on Dynamic Measurement System for Bulk Material Based on Machine Vision
- Chapter 9: Methods and Algorithms of Research and Designing
- The Application of Artificial Immune System in Mechanical Engineering for Constrained Optimization
- Research of Robocop Simulation Platform for Robot Soccer
- Adaptive Error Concealment Technology Based on H.264 for Digital Satellite Set-Top Boxes
- New Compound Method for Target Recognition and Tracking
- Fast 3D Human Face Modeling Method Based on Multiple View 2D Images
- Probabilistic Controlled Teleportation of an Arbitrary Triplet W State
- Design and Implementation of Manchester CODEC Based on FPGA
- Image Enhancement Based on the Minimum Entropy and Rough Sets
- Research on Filtered-XLMS Algorithm Based Adaptive Active Noise Control
- A Hybrid Optimization Method for Neural Tree Network Model
- A Novel Real-Time Facial Expression Capturing Method
- Bell Waves and Kind Waves for a (1+1)-Dimensional Nonlinear Partial Differential Equation
- The Study on 4-Link Fish Robot Model Optimization Based on Evolutionary Algorithm
- Weighted Cellular Automata Design for Test Pattern Generator Based on Genetic Algorithm
- Biomechanical Analysis of Cervical Finite Element Model
Les mer
Produktdetaljer
ISBN
9783037855881
Publisert
2013-03-13
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
200 gr
Høyde
240 mm
Bredde
170 mm
Dybde
44 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
888