Functional and Functionally Structured Materials
Heftet /
2016
/ Engelsk
Produktdetaljer
ISBN
9783038357605
Publisert
2016-04-20
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1320 gr
Høyde
240 mm
Bredde
170 mm
Dybde
41 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
810
This is the proceedings of the selected papers presented at Chinese Materials Congress 2015 (CMC2015) held in Guiyang, China, July 10-14, 2015.
This is the volume for Part 2 including 122 papers selected from 12 symposia of AA. Multifunctional Composites and Meta-composites; G. Microelectronics and Optoelectronics Materials; H. Ferroelectric and Oxide Electronic Information Materials; I. Multiferroic Materials; J. Superhard Materials; K. Preparation and Application of Superconducting Material; L. Bulk Nano Ultra-fine Crystal Materials; M. Biomedical Materials; N. Advanced Ceramic Materials; O. Polymer Materials; P. Functional Elastomer Materials; Q. Shape Memory and Self-healing Polymeric Materials
Les mer
Selected, peer reviewed papers from the Chinese Materials Conference 2015, July 10-14, 2015, Guiyang, China
- Preface
- Chapter 1: Composites and Polymers
- 2D Meso-Scale Finite Element Modeling and Simulation of Polymer-Mineral Composite Material
- High Dielectric Constant of Silver Nanowires–Epoxy Composites
- Progress in Conductive-Polymer Carbon Nanotube Composites
- Radio-Frequency Electromagnetic Properties of FeSiCr–Epoxy Composites Prepared by Cryomilling
- Variation of Magnetoelectric Coefficient with Volume Fraction of Piezoelectric Phase in Pb(Mg1/3Nb2/3)O3-PbTiO3/FeCoV Laminate Composite
- Effect of Y2O3 on the Sintering, Mechanical and Dielectric Properties of Mullite/h-BN Composites
- Fabrication of SiCf/SiC Composite with In Situ Grown SiC Nanowire by Polymer and Infiltration Pyrolysis Process
- Study on TaC Reinforced Iron Matrix Surface Gradient Composites Produced In Situ
- Thermal Conductivity of Polyimide Resin-Based Composite with Cu Fibers
- Synthesis and Characterization of Magnetic Fe3O4/PAAm/LMSH Nanocomposite Hydrogel
- Two-Dimensional Composite Biomimetic Films with Wide Optical Spectrum Response and their Properties
- High Thermal Conductive Insulation Composite Materials
- Nano-Cu/Low-Density Polyethylene Composites: Structure and Control Release of Cupric Ions
- Photocatalytic Property of Rice Husk Char/TiO2 Composite Prepared by Low-Temperature Method
- Preparation and Characterization of a Novel Anti-Dripping Flame Retardant PET/Phosphate Glass Nanocomposite
- Preparation and Properties of Recycled PET Fibers Filled Polyethylene Composites
- Polydopamine Nanoparticle for Poly(N-Isopropylacrylamide)-Based Nanocomposite Hydrogel with Good Free-Radical-Scavenging Property
- Exploring the Effect of Molecular Components on Hydrolysis-Resistance Performance and Hydrophilicity of Amphiphilic Poly(Ester-Block-Ether) Copolymers
- Water Absorption Behavior in Poly(Ethylene Terephthalate)-Poly(Ethylene Glycol) Block Copolymer Matrix by Two-Dimensional Correlation Spectroscopy
- Fabrication of Copolymer PMMA-BMA Oil Absorption Resin
- Preparation and Characterization of Multiwalled Carbon Nanotubes-Reinforced pCBT by Ring-Opening Polymerization of Cyclic Butylene Terephthalate
- Synthesis and Shape Memory Property of a MDI Based Liquid Crystalline Polyurethane
- Effects of Ionic Group on the Shape Memory Performance of Polyurethane
- Preparation and Properties of Polyurethane Films with Spent Coffee Grounds
- Preparation of Slow-Released Films Based on the Natural Rubber Latex Modified by Cassava Starch
- Synthesis of MDI-50 and Tung Oil-Based Non-Ionic Waterborne Polyurethanes
- Phenylethynyl-Terminated Polyimide Oligomers with Low Viscosity and Good Thermal Properties
- The Effect of Temperature Elevation on Microwave-Transmitting Property of Organosilicone-Matrix Radome
- Nonisothermal and Isothermal Degradation Kinetics of Thermotropic Liquid Crystal Copolyesters Containing BPA and BPAF Units
- Study on the Identification of Adulteration of Polycarbonate Drinking Bottles with Postconsumer Recycled Plastics
- Preparation and Characterization of Structural Damping Composites Toughened by Polyamide Nonwoven Fabrics
- Multiple Toughening Mechanisms of Laminated Ti-TiBw/Ti Composites Fabricated by Diffusion Welding
- Chapter 2: Ceramics and Glasses
- Enhanced Energy Harvesting from Piezoceramic Using Hybrid Stimulations
- Tunable Dielectric Properties of BaTiO3/La2O3 Composite Ceramics
- Effect of Pre-Added Cristobalite Content on the Properties of Silica-Based Ceramic Cores
- Influence of Sintering Temperatures on Microstructures and the Thermal Conductivity of CuAlO2 Ceramics
- Microstructure and Performance of Fused Silica-Based Ceramic Core Reinforced by Mullite Fiber
- Preparation and Properties of SiC Porous Ceramics Made by Oxidation-Bonding Technique
- Preparation of SiC Porous Ceramic for Application in Filter Plate Supports
- Effect of B2O3 and P2O5 Addition on the Phase Separation and Crystallization of Li2O-MgO-Al2O3-SiO2 Glass-Ceramics
- Influence of Confinement on Ceramic’s Mechanical Properties
- Ionic Liquid-Assisted Synthesis of C@ZrSiO4 Ceramic Inclusion Pigment
- Preparation and Properties of Up-Conversion Luminescent NaYF4:Yb3+, Er3+ Ceramics
- Fabrication of Porous Al2O3 Ceramics by Freeze Drying Technique and Annealing Treatment
- Preparation and Properties of B4C Ceramic Tapes by Aqueous Tape-Casting
- Effects of Rare Earth Chlorides on Properties of Al2O3-MgO Castables
- Effect of Heat Treatment on the Preparation of Zircon Whiskers
- Study on Mullite Whiskers Preparation via Non-Hydrolytic Sol-Gel Process Combined with Molten Salt Method
- Effects of Al2O3 Buffer Layer on the Properties of ZnO: Al Thin Films Deposited on Glass by Sputtering
- Variation of Transparency of Zeolite-Derived Silica Glass Prepared by Spark Plasma Sintering
- Preparation of Highly Transparent Silica Glass by SPS Sintering of SBA-15
- Low-Temperature Synthesis of Magnesium-Stabilized Aluminum Titanate Powder via Non-Hydrolytic Sol-Gel Method
- Low Temperature Synthesis of Ultrafine Al2TiO5 Powders by Hydrolytic Sol-Gel Method
- In Situ Growth of Mullite Whisker Using Different Aluminium Source and Properties of Mullite-Corundum Lightweight Refractory
- Effect of Polyvinyl Pyrrolidone Dosage on Barium Ferrite Fibers via Electrospinning
- Sb5+ Modified Phase Transition in (Li, Na, K)(Nb1-xSbx)O3 Piezoelectric Ceramics
- Chapter 3: Metamaterials in Microwave Application
- Electromagnetic Simulation of Influence of Metamaterial for Magnetic Resonance Imaging at 3T
- Dual-Band Linear Polarization Transformer with Diode-Like Asymmetric Transmission Based on Composite Metamaterial
- The Design of a Wideband Microwave Absorber Based on Resistively Single Square-Loop Arrays
- Preparation of SiO2 Matrix Composite with Tunable Dielectric Properties in Radio Frequency Range
- Preparation and Dielectric Property of C/SiO2 Composite via Self-Assembly
- Chapter 4: Materials for Electrochemical Application
- Influence of Bi2O3 on Microstructure and Properties of YSZ Solid Electrolyte Material
- Preparation of Anode-Supported SOFC Electrolyte Membrane and Porous Anode Material
- Effects of Pore-Forming Agent on Characterization of NiO/YSZ Porous Anode for SOFC
- Preparation of NiO Nanosheets by Hydrothermal Method and its Electrochemical Capacitive Properties
- Synthesis, Electrical Properties and Chemical Stability of BaCe0.7In0.3-xGdxO3-δ
- Chapter 5: Materials for Electronics and Optoelectronics
- Effect of Compositions, Crystal Structures and Morphologies on Photo-Luminescent Property of LaPO4:Gd3+
- High Photocatalytic Activity of Covalent Grafting of Phthalocyanines on Crosslinked Electrospun PVA/PAA Nanofibers
- Performance Improvement of Phase Change Memory Cell by Using a Tantalum Pentoxide Buffer Layer
- Replacement of High-Purity Copper Target by High-Purity Copper Alloy Target in Very Large Scale Integrated Circuit
- Organic/Inorganic Hybrid Materials for Organic Electronic Application
- Optical Characteristic and Application of CH3NH3PbI3 Thin Film in Schottky Diode
- A Promising Energy-Saving and Environmental-Friendly Lighting Device: High CRI White LED with Phosphor Materials
- Preparation and Properties of SiC/Phenolic Resin for the Heat of LED
- Investigation of Ni Doped Ge-Te Materials for High Temperature Phase Change Memory Applications
- Synthesis of Highly Luminescent CdSe/ZnCdS Quantum Dots with Deep-Red Emissions
- Investigation on Power Effect of Gallium-Doped Zinc Oxide Thin Film Semiconductor Performance
- Improve the P-Type Conductivity of SnO Films by Na Ion Implantation
- Effect of Sm3+ Concentration on the Vibrational and Luminescent Properties of LaPO4
- Self-Precipitated Process of Te Nanowire from Zr-Doped Sb2Te3 Film
- DFTB Calculation of Si Atomic Chains’ Structures and Electronic Properties
- Effect of Doping Concentrations on Properties of Ga-Ti Co-Doped ZnO (GTZO) Targets
- Synthesis of Silicon Microspheres
- Preparation of N-Type Cuprous Oxide Films via Electrodeposition Method and their Photoelectrochemical Activities
- Chapter 6: Materials for Biomedical Application
- Reduction-Degradable Shell Cross-Linked Micelle with pH-Responsive Cores Prepared via Click Chemistry
- Effect of Sintering Temperature on Porous Structures and Mechanical Properties of Ti-39Nb-6Zr Alloys
- Antibacterial Activity and Stability of the Electrospun Antibacterial Polymer/Silver Nanoparticle Nanohybrid Mats
- Determination of Gelation Kinetic Parameters for a Chitosan/β-Glycerophosphate Injectable Hydrogel by Means of Rheological Measurement
- NIR (Near-Infrared) Driven Carbon Nanotube Modified with Dendrimers
- Preparation and Biological Properties of Nano-Silk Fibroin/Polyurethane/Silver Nanoparticles Composite Membranes
- Cytotoxicity and Hemolytic Properties of Nano-Hydroxyapatite/Polyetheretherketone Biocomposites
- Chapter 7: Alloys, Steel, Superhard Materials
- Structure, Magnetostriction and Magnetic Properties of the Mn100-xFex (x=50, 58) Alloys Prepared by SPS
- Gradient Nano-Grained Cu and Cu-Zn Alloys Processed by Surface Mechanical Attrition Treatment
- Microstructure and Mechanical Properties of Nano-Grained Dual-Phase Ni-Based Alloy
- Hall-Petch Relation in a Spheroidized Carbon Steel with Emphasis on the Effect of Intergranular Particles
- A Study on Ultra-Hard AlMgB14 Modified by TiB2 and Ni3Al
- Study on High Pressure Sintering of Nanocrystalline Diamond with Nano Silicon as Additives
- Uniform Deposition of Chemical Vapor Deposition Diamond Films on Slender Tungsten Wires
- Influence of Austenite Grain Size on Martensite Start Temperature of Nb-V-Ti Microalloyed Ultra-High Strength Steel
- Effect of Iron-Rich Intermetallic and Eutectic Si Accumulation on Al-Si-Mg Alloy
- Chapter 8: Ferroelectric, Ferromagnetic and Superconducting Materials
- Preparation and Properties of La-Doped BiFeO3 Thin Films
- Preparation and Characterization of Amorphous Fe-B-P Ultrafine Particles
- Effects of High-Energy Ball Milling Time on the Sintering Process of FeSe Superconductors
- Preparation and Superconductivity of Bi-O-S System
- YDyxBa2Cu3O7-δ Epitaxial Films Prepared by Chemical Solution Deposition
- Electric-Field-Control of Non-Volatile Magnetization Switching in Multiferroic CoFeB/(011)-PMN-PT Heterostructures
- Structural and Magnetic Properties of Cr- and Fe-Doped CeO2 Nanoparticles Prepared by Sol-Gel Method
- Chemical Bonds Properties and Spontaneous Polarization of Orthogonal SrBi2Ta2O9 Crystals
- Influence of Microstructure on Pass through Flux of High Purity Ni
- Thermal Expansion, Magnetic and Electrical Properties of Ternary Compound DyCo0.67Ga1.33
- Microstructure and Magnetic Properties of RE2.28Fe13.58B1.14 Alloys
- Chapter 9: Functional Films and Membranes
- Preparation and Properties of TiO2/SiO2 Thin Films on Enamel Substrates
- Preparation and Characterization of Water Absorbing and Anti-Fogging Coatings
- Effect of Modified NanoSiO2 Agents on the Morphologies and Performances of UHMWPE Microporous Membrane via Thermally Induced Phase Separation
- Structure and Performance of PP Porous Membrane Prepared with Adipic Acid and NA-40 as Nucleating Agent via TIPS
- Effects of Pyrolysis Temperature on the Properties of Phenol-Formaldehyde Resin Based Carbon Molecular Sieve Membrane
- Random Lasers with Coherent Feedback from Polymer Films Based on Rh6G-PVP
- Chapter 10: Functional Materials for Sensors
- Progress on the Applications of Piezoelectric Materials in Sensors
- Viscoelastic and Morphological Behavior of Stearic Acid Layer on Top of Polystyrene as Immobilisation Matrix for QCM Sensor
- Lateral Inhomogeneity of Critical Current of HTS Conductor Using Hall Sensor Array
- Effect of Heat-Treatment on the Microstructure and Properties of SiO2-TiO2 Aerogels Synthesized via Supercritical Drying
- In-Plane Strain Field Sensor Based on the Semiconductor Film
Les mer
Produktdetaljer
ISBN
9783038357605
Publisert
2016-04-20
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1320 gr
Høyde
240 mm
Bredde
170 mm
Dybde
41 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
810