Chinese Materials Conference 2017 (CMC 2017)

Selected, peer reviewed papers from the Chinese Materials Conference 2017 (CMC 2017, Yinchuan City, Ningxia, China, July 06-12, 2017)

• Preface
• Chapter 1: High Performance Structural Alloys, Properties and Processing Technologies
• Effects of the Delivery Tube Diameter on the Qualities of Cu-9.7Sn-0.2P Alloy Powder Produced by Gas Atomization
• Effect of Cold Rolling Reduction on Recrystallization Behaviors of AA5754 Sheets in a Short Annealing Time
• Property Requirements and Research Progress of Aluminum Alloy Sheets for Automotive Closure
• Thermal Deformation Behavior and Processing Map of Al-Mg-Er Alloy
• Bake Precipitation Behavior in AA5182 Sheet for Can End Stock
• Hot Compression Deformation Behavior and Microstructural Evolution of Al-7.5Zn-1.5Mg-0.2Cu-0.2Zr Alloy
• Effect of Cold Deformation and Annealing on Microstructure and Mechanical Properties of 5083 Aluminum Alloy Sheets
• Microstructural Changes and Thermal Stability of A201, 319s and 2618 Aluminum Alloys during Thermal Exposure
• Deformation Behavior and Microstructure Evolution of 6063 Alloy during Hot Compression
• Trace Al-Ti-C-Ce on Solidification Structure Transformation and Fracture Properties of Al-Cu-Mn Alloy
• Effect of Equal Channel Angular Pressing on Microstructure and Mechanical Properties of ZL205A Alloy
• Effects of Mechanical Vibration on Double Curvature Creep Aging Forming of 2124 Aluminum Alloy
• Aging Behavior of A356.2 with Yb Modified
• An Experimental Platform for Controlled Solidification and Heat Treatment and its Application in TiAl Alloys
• Superplastic Deformation Behavior and Cavity Formation of Ti55 Titanium Alloy
• Effects of Heat Treatment on Microstructures and Mechanical Properties of Ti-38644 Alloy for Aerospace Fasteners
• Characteristics and Evolution Mechanism of Solidification Microstructure for Laser Additive Manufactured Ti₂AlNb-Based Alloy
• On the Partial Pressure Measurement and Activity Calculation of Mn in the Ni-Cr-Co-Mo Alloy Melt
• Microstructure Analysis and Creep Behaviour Modelling of Powder Metallurgy Superalloy
• Effects of Phosphorus on Microstructure and Mechanical Properties in NiCr Alloys
• Segregation and Precipitation Behavior of Phosphorus in a Ni-Fe-Cr Base Wrought Superalloy
• Effect of Extrusion Texture on Mechanical and Electrochemical Properties of Aluminum Alloy Drill Pipe
• Numerical Simulation of Combustion Resistant Titanium Alloy Wear Behavior at High Temperature Fields
• Effects of Extrusion-Shear and Direct Extrusion on the Plastic Deformation of AZ31 Magnesium Alloy
• Effect of Welding Parameters on Defects and Fracture Behavior of Friction Stir Welded 2195-T8 Al-Li Alloy Joints
• Effect of Planar Anisotropy and Tension-Compression Asymmetry of CP-Ti on its Deep Drawing Behavior at Room Temperature
• Effects of Solid Solution and Aging Treatment on Texture Evolution and Properties of Cu-Ni-Si Alloy
• A Comparative Study on the Friction and Wear Properties of Three Different Copper Alloys
• Experimental Study and Numerical Simulation of Microstructure Evolution in Al-Si Eutectic Solidification Process
• Influence of Silicon on Nucleation and Growth Process of Spherical Graphite in Ni-C Alloys Solidification Structure
• Effects of Process Parameters on Morphologies and Microstructures of Laser Melting Deposited V-5Cr-5Ti Alloys
• Chapter 2: Steels and Structural Metals, Properties and Processing Technologies
• Rate Theory for Dislocation Loops Evolution in AL-6XN Austenitic Stainless Steel under Proton Irradiation
• Fatigue Mechanism of Domestic 316LN Stainless Steel in Simulated AP1000 First-Loop Water Environment
• Influence of Warm Deformation on Strain-Induced Martensite Behavior of 316L Stainless Steel
• Formation of Face Centered Cubic Titanium Thin Films on MgO(111) Single Crystal Substrate
• Effect of Annealing Temperature on Microstructure and Properties of Ultra Purified Ferritic Stainless Steel Containing Copper
• Microstructure Evolution of Copper Strip during Continuous Extrusion and Rolling Forming
• Effect of Copper and Annealing Dew Point on Oxidation Behavior of C-Si-Mn Steels
• Bare Spot Defect on a Hot Dip Galvanized DP Sheet Strip
• Effect of Slab Centerline Segregation on DWTT Properties of 22mm Thick X80M Hot Rolled Steel Strip
• Effect of Ultra-Fast Cooling Rate on the Microstructure and Mechanical Properties of High Strength Cold-Rolled Sheet under Continuous Annealing
• Microstructure and Properties of HAZ in Low-Carbon Bainite E550 Steel during Double-Pass Welding Thermal Cycle
• Nondestructive Evaluation Method of Average Grain Size in TWIP Steel by Laser Ultrasonic
• Strain-Hardening Properties of High Grade Line Pipes
• Transfer Welding Process and Microstructure and Properties of Titanium/Steel Clad Pipe
• Simulation Study on Heating Process of Hot Rolled Steel Strip for X80M Pipeline Steel
• Development of Domestic CT80S Sulfur Resistance Coiled Tubing
• Chapter 3: Functional Coatings, Claddings, Surface Treatment and Corrosion Behavior of Structural Materials
• Microstructure and Oxidation Resistance of Y Modified Silicide Coatings Prepared on Zr-Ti-Al Alloy
• Bio-Inspired In Situ Fabrication of 11-Mercaptoundecanoic Acid Coating on Stainless Steel 304 for Corrosion Protection
• A Thick Al-Based Composite Coating Cladded by the Amorphous Powder
• Wear Resistance of a Large Thick Fe Based Amorphous Composite Coating Deposited by Laser Cladding
• Electrodeposition and the Optimization of Molybdenum Layer on Nb-Ti-Si Based Ultra-High Alloys from Aqueous Solution
• Efficient Micro-Arc Oxidation Technology for As-Cast AZ80 Magnesium Alloy
• Morphology and Microstructure of Tungsten Films by Magnetron Sputtering
• Understanding the Inhibition Mechanism of a Supramolecular Complex as the Corrosion Inhibitor for Mild Steel in the Condensate Water
• Influence of Sc Addition on the Corrosion Behavior of Medium Strength Al-Zn-Mg Alloy
• Effect of Sodium Citrate on Electrochemical Behaviour of Copper in Acid Bath
• Chapter 4: Functional Ceramics and Composite Materials
• Effect of WC Additive on Microstructural Evolution and Properties of TiC Steel-Bonded Carbide
• Effects of Lanthanum Substitution on Dielectric, Ferroelectric and Electro-Optic Properties of Slim-Loop PLZT Ceramics
• Preparation and Characterization of Mechanical Properties of Hydroxyapatite/Carbon Nanotube Laminated Ceramic Composites Consolidated by Spark Plasma Sintering
• Raman/Infrared Spectra and Microwave Dielectric Properties of 0.22CaTiO₃-0.78(Li_0.5Sm_0.5)TiO₃ Ceramics with MgO Additive
• Effects of Different Matrix on Interface and Compression Fracture Behavior of WC Particles Reinforced Iron Matrix Composites
• The Structural Evolution of Al-6Y-2P Master Alloy and its Influence on the Refinement of Mg₂Si Phase in Mg₂Si/Al Composites
• Establishment of Processing Maps for 25vol.% B₄C_P/AA6061 Composite and its Application in Hot Pack-Rolling Process
• A Facile Method of Preparing Core/Shell Cu@Mo Powders
• In Situ Synthesis and Structural Design of Ti/TiC Functionally Graded Materials
• Microstructure and Mechanical Properties of AlN Particle Reinforced Mg-Al Matrix Composites with Different Particle Contents
• Effect of Carboxylic CNTs Filling on Mechanical Behaviors of Basalt Fiber/Epoxy Composites
• Machinability for C/SiC Composite Material by Electrical Discharge Machining
• Interfacial Microstructure and Formation Mechanism of Zirconia Ceramic and Nb Brazed with Ag-Cu-Ti Powder without and with Mo-Particle-Reinforced
• Effect of Modified Diatomite on Crystallinity and Mechanical Properties of Polypropylene
• 3D Printing of Carbon Fiber Reinforced Plastics and their Applications
• Interfacial Effect on Mechanical Properties of Polypropylene Ternary Nanocomposites
• Chapter 5: Computational Procedures in Materials Science
• Structures, Mechanical Properties and Band Structures of Pentagonal B_xN_y Monolayers
• First-Principles Study of the Effect of Cr Content on Interstitial Oxygen Solution Behavior in Nb-Cr Alloys
• Thermodynamic Calculation of Liquidus Projection of Multiple Aluminum Alloys
• Stability, Mechanical Properties and Electronic Properties of X₃Si (X=V, Nb, Cr, Mo and W) from First Principles Calculations
• Tensile Properties of Carbon Nanoring Linked Graphene Sheets: A Molecular Dynamics Investigation
• CRSS of Mg-X(X=Zn, Y) Binary Solid Solution via First-Principles Study
• Design of New Weathering Steels through Thermodynamic Model of Nitrogen Solubility and CALPHAD
• Influence of Initial Defects on the Mechanical Properties of Single Crystal Copper: Discrete Dislocation Dynamics Study
• CBED and EELS Measurements of Post-Irradiated Aluminum Specimen Thickness
• Cascade Collision near the Grain Boundary of Fe-Cr Alloy by MD Simulation
• Chapter 6: Advanced Functional Materials
• Magnetic Properties of Pure Iron with Respect to Different C/Si Ratios and Grain Sizes
• Iron-Based Amorphous Magnetic Properties by Ni Content Tuning and Isothermal Treatment
• A Centimeter-Size High Toughness Zr-Cu-Al-Nb Bulk Metallic Glass with Nano-Crystallization and Phase Separation
• Effect of Service Environment on Mechanical Properties of FeCoNiCrAl_0.1 Alloy
• Y-Ray Shielding Performance and Mechanical Properties of Mortar Strengthened by Amorphous Alloy Fibers
• Effect of Annealing Time on the Magnetic Properties of FeNiCuNbSiB Dual-Phase Alloys
• Preparation and Sorption Properties of Zr-Co-Ce Getter Films
• Easy Preparation of Bacterial Cellulose/Triamcinolone Acetonide Composites and their Inhibition for Fibroblasts
• Glucose-Responsive Hydrogels Based on Phenylboronic Acid
• Synthetic Comb-Like Phase-Change Material Poly(Acrylonitrile-co-Lauric Acid) Copolymer for Low Temperature Energy Management
• Preparation and Characterization of Flame Retardant PET Fiber via Melt Blending
• Evaluation of Foaming and Nucleation and Growth Mechanism of Soy-Based Polyurethane Foams
• A Metal Coordination Crosslinking Novel High Performance Thermoset
• Investigation on the Dealloying Process of Mn_75-xNi₂₅Al_x (x=0, 5, 10, 15, 20 at. %) Alloy Ribbons
• Phase Transition Behavior and Magnetocaloric Effect in a Heusler Ni₅₀Mn₃₇Sn₁₃ Unidirectional Crystal
• Effects of Zr Content on the Bending Property and Crystallization Behavior of Ductile Zr-Based Bulk Metallic Glasses
• Chapter 7: Materials and Technologies for Energy Storage Devices, Alternative Energy Production and Electronics
• Chemical Modification Graphene as a High Performance Anode Material for Lithium-Ion Batteries
• Preparation of Graphene/N-TiO₂ Nanoclusters by One Step Anodic Oxidation for Visible-Light-Driven Hydrogen Production
• Low Temperature Preparation of PbS Thin Films by Chemical Bath Deposition and the Photovoltaic Performance in Heterojunction Solar Cells
• Enhanced Thermoelectric Properties of BiCuSeO Ceramics by Bi Vacancies
• Synthesis and Thermoelectric Properties of WO₃/Cu₂SnSe₃ Composites
• Graphene-Carbon Nanotubes-Modified LiFePO₄ Cathode Materials for High-Performance Lithium-Ion Batteries
• Microfluidic Synthesis and Electrochemical Performance of Ternary Metals Nanoalloy: FePtSn
• Si-Ni Alloy as Anode Materials for Lithium Ion Batteries: A First-Principles Study
• Tungsten Matrix Material for Diffusion Barium Tungsten Cathode
• Preparation and Influencing Factors of Molybdenum Targets and Magnetron-Sputter-Deposited Molybdenum Thin Films
• Effects of Rare Earth Y Addition on Microstructural and Properties of Pure Copper
• A Charge Storage Based Enhancement Mode AlGaN/GaN High Electron Mobility Transistor
• Chapter 8: Materials and Technologies for Environmental Engineering and Waste Recycling
• Improvement Effects of Different Environmental Materials on Coastal Saline-Alkali Soil in Yellow River Delta
• Effects of Ferric Salts on Sludge Anaerobic Digestion and Desulphurization
• Denitrification Activities of Mg-Mo-V-Ti Catalysts Prepared by Dipping Method at Low Temperature
• Denitrification Activities of Mo-V-Ti Catalysts Prepared by Dipping Method at Low Temperature
• Effects of Calcination Temperature on the Microstructure and Adsorption Properties of Attapulgite Microspheres
• A Review of Research on Substrate Materials for Constructed Wetlands
• Polyamidine as a New-Style Coagulant Aid for Dye Wastewater Treatment and its Floc Characteristics
• Kinetic Equilibrium and Adsorption Thermodynamics of Direct Dyes by Ca/CTS/FA Composite
• Influence of Catalysts with Different Templates on Direct Decomposition of NO in Cement Kiln Exhaust
• Extraction of Tungsten and Vanadium from the Spent SCR Catalyst by High Pressure Alkaline Leaching Method
• Preparation of Tungsten Nanoparticles from Spent Tungsten Carbide by Molten Salt Electrolysis
• Effect of Cement Raw Material and Oxygen Concentration on SNCR Reaction
• Different Precipitant Preparation of Nickel-Doped Mn/TiO₂ Catalysts for Low-Temperature SCR of NO with NH₃
• Energy Consumption and Carbon Emission Analysis of Natural Graphite Anode Material for Lithium Batteries
• Life Cycle Assessment of Typical Rubber-Plastic Sponge Production in China
• Life Cycle Assessment of Typical Glass Wool Production in China
• Life Cycle Assessment of Nickel Production in China
• Environment Impact Analysis of Natural Graphite Anode Material Production
• Comparative Life Cycle Assessment of Autoclaved Concrete Blocks and Fired Blocks in China
• Synthesis and Photocatalytic Activity of Ag Doped TiO₂ Nanofibers
• Structure and Surface Properties of Al³⁺- Modified Sepiolite
• Chapter 9: Advanced Building Materials
• The Rheological Properties of Crumb Rubber with Different Recycled Waste Tires Modified Binders
• A Comparative Life Cycle Assessment of Typical Foam Glass Production
• Effect of Layered Double Hydroxides with Different Particle Size on Properties of Bitumen
• Effect of Different Media Aqueous Solution on Road Performance of Asphalt Mixtures
• Rheological Model and Viscoelasticity of Crumb Rubber Modified Bitumen
• Investigation on Rheological Characteristics of Fresh Cement Mortar
• Mechanical Properties of Self-Healing System in Cementitious Material with Microcapsule
• Effect on Structure and Properties of Cement-Based Materials by Polymer-Modified Metakaolin Slurry