Frontiers of Mechanical Engineering and Materials Engineering II
Heftet /
2014
/ Engelsk
Produktdetaljer
ISBN
9783037859247
Publisert
2014-02-06
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
3270 gr
Høyde
240 mm
Bredde
170 mm
Dybde
89 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1780
Collection of selected, peer reviewed papers from the 2013 2nd International Conference on Frontiers of Mechanical Engineering and Materials Engineering (MEME 2013), October 12-13, 2013, Hongkong.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 350 papers are grouped as follows:
Chapter 1: Material Science and Chemical Engineering;
Chapter 2: Mechanical Engineering and Manufacturing;
Chapter 3: Automation, Information Technologies and Data Processing;
Chapter 4: Engineering Management and Product Design
Les mer
<p>Selected, peer reviewed papers from the 2013 2nd International Conference on Frontiers of Mechanical Engineering and Materials Engineering (MEME 2013), October 12-13, 2013, Hongkong</p>
- Preface and Committee
- Chapter 1: Material Science and Chemical Engineering
- Effect of Equal Channel Angular Pressing on Corrosion Resistance of Al-Mg Alloy
- Influence of Stress Ratio on Fatigue Crack Propagation in TiAl Alloy
- Study on Corrosion Behavior of 16MnR in the Circulating Water System
- Fabrication of Polyacrylonitrile Nanoporous Fibers via Electrospinning
- Illustration of Fracture Mechanism in High Temperature for TiAl Alloys
- Research on Numerical Simulation of Quad Bundle Conductor on Galloping
- Functional Studies on Coffee Yarn Knitted Clothing Fabrics
- The Experimental Study on Consolidation of RTV for Wet-Area Earthen Ruins in Southwest China
- The Characterization of Two-Direction Vector-Valued Wavelets and its Applications in Material Engineering
- Preparation and Performance Evaluation of PU Foam Composite Board
- Effects of 1-Ethyl-3-(3-Dimethylaminopropyl) Carbodiimide Cross-Linking Duration on the Structure of Chitosan/Gelatin Composite Bone Scaffolds
- Polyester/Low Melting Point Polyester Nonwoven Fabrics Used as Soilless Culture Mediums: Effects of the Content of Low Melting Point Polyester Fibers
- Recycled Polypropylene/SEBS Polyblends: Manufacture and Mechanical Property Evaluation
- Effects of Tooth Number of Drive Gear on Mechanical Properties of Polypropylene/Polyester Composite Tubular Knits
- Mechanical and Physical Property Evaluations of Kevlar/Polyester Complex Nonwoven Fabrics
- Synthesis of Polyurethane Dendrimers and Transfer Properties of Dye
- The Start-Up of A/O Biofilm Process with Silicon-Based Zeolite Filter Material
- Treatment of Domestic Wastewater by A/O Biofilm Process of Silicon-Based Zeolite Filter Material
- Preparation of Nanometric Mixed Crystals of TiO2 by TiCl4 and TiCl3
- Experimental Research on the Adsorption Behavior of NH3 at the Surface of CaO
- Effect of the Doping Ni and Overdosing Lithium for Synthesis LiMn2O4 Cathode Material by the Solid State Reaction Method
- Nanocrystalline TiO2 Composte Films for Enhanced Photocatalytic Activity
- Effects of Dicyandiamide on the Accumulation and Leaching Risk of Soil NO3--N in Aquic Brown Soils
- Study on Aging of Zinc Oxide/Poly(butylene succinate) Composite
- Adsorption Thermodynamics Study on CCl2F2 over Solid Base Na2O/ZrO2
- Study on Preparation and Properties of PMMA Composite Microspheres as the Matrix of Low Density Proppant
- Development and Research of Nanostructured Multi-Layered Composite Coatings for Tool Made of Tungsten-Free Carbides (Cermets)
- Investigation of the Influence of Deep Rolling on the Thermal Fatigue Cracking for AISI H13 Steel
- Microstructure and Properties of SiC Particle Reinforced Aluminum Matrix Composites by Powder Metallurgy Method
- Experimental Study of Lanthanum Boride Ceramic Powder Synthesis Process
- Synthesis, Characterization, and Crystal Structure of Several Novel Acidic Ionic Liquids: 1-ethyl-2-alkyl-benzimidazolium Tetra-Fluoroborate
- Investigation of the Strain Distribution of T-Peel Flexible Polymers Using Digital Image Correlation
- Preparation and Properties of Thermosensitive Poly(N-isopropylacrylamide-co-glycyrrhetinic acid) Microgels for Controlled Growth Factor Release
- On the Performance of 17Ni/(10NiO-NiFe2O4) Cermet by Hot-Press Sintering Technology: Sintering Temperature Effects
- Numerical Simulation Analysis on Porthole Dies Extrusion of Aluminum Mini-Thin Harmonica-Shaped Tube
- Experimental Investigation on Laser Milling of Al2O3 Ceramic
- Application Study of Flotation Column in Reverse Flotation of Magnetic and Hematite Mixed Iron Ore
- Design and Processing of Temperature Resistant Enamel Coating Materials
- The Process Experimental Study on High Efficiency Deep Grinding for 9SiCr Alloy Steel with a CBN Wheel
- Study on the Texture of Materials in Stop Motion
- The DFT Studies on a Novel Hydrogen Storage Material Mg12Ni6-xCrx(x=0,1)
- Calculations and Modeling of Material Constants in Hyperbolic-Sine Creep Model for 316 Stainless Steels
- Synthesis of Lithium-Ion Battery Cathode Material LiFe0.95Mn0.05PO4/C Using FeCl3 Etching Waste as Iron Source
- Novel Anticaking Materials of Bentonite, Biological Carbon and Abandoned Animal/Plant Oil in Compound Fertilizer
- Hydrothermal Synthesis and Investigation of Photocatalytic Properties of Fe-N Co-Doped NaTaO3
- Preparation and Properties of Cf-Ti3SiC2-Cu-Graphite Composites
- Investigation on the Effect of Complexing Agents and Concentrations on Electrodeposition of ZnS Film
- Effect of Pulse Magnetic Field on Primary Silicon in Al-20Si Alloy
- Anti-Wear Performance of Novel Tri(hydroxymethyl) Propane Esters as Additives in Rapeseed Oil
- Preparation of Novel B, N, S-Containing Tri(hydroxymethyl)propane Esters and its Friction-Reducing Performance as Additives in Rapeseed Oil
- Mechanical Properties of Rice Straw Particle/HDPE Composites
- Starch-Based Biodegradable Packaging Materials of Antimicrobial
- Study on Grinding Kinetics of a Unique Double-Sphere Grinding Media for Cassiterite-Polymetallic Sulphide Ores
- A New Purification Way for Multiwalled Carbon Nanotubes
- Morphology of Polyethylene/Montmorillonite Nanocomposites Prepared by In Situ Polymerization
- Effect of Ce Co-Deposition on Phase Structure and Thermal Stability of Ni-Cu-P Alloy
- Phase Structure and Thermodynamic Stability of Various Nickel-Base Multicomponent Alloy Coating
- Virtual Material Model of Joint Interfaces Considering Elastic-Plastic Deformation of Asperities
- Preparation of PVAc/CNT/Carbon Black Composite Particles
- Preparation and Characterization of Al2O3 High Density Ceramic Materials
- Microwave-Assisted Precipitation Synthesis and Photoluminescence Properties of SrWO4 Mesocrystals with Different Shapes
- Influence of Ultrasonic Energy on Pore Structure of Ni-P Ultra-Black Films Produced by a Novel Blackening Process
- The Effect of HNO3 on Functionalization of CNTs
- A Phase-Selective Supramolecular Gelator as Oil Solidifier
- Biomimetic Fabrication and Infrared Properties of Hierarchically Structured ZnO Derived from Cotton Fibers
- Dynamic Mechanical Properties and Phase Structure of Polyethylene/Montmorillonite Nanocomposites Prepared by In Situ Polymerization
- Characterization of Gamma Irradiated Isotactic Polypropylene by Mixtures of Hindered Amine/Organo-Phosphite Stabilizers
- Simulation Research on Three Kinds of Alloy Material for Penetration
- Study of Matrix Transfer Multipliers for Normalized Pseudoframe Wavelets and Applications in Material Engineering
- Preparation and Performance of Polysulfone Hollow Fiber Ultrafiltration Membranes
- The Benzoin Condensation Reaction under Different Ultrasonic Frequency and Phase Transfer Catalyst
- Influence of Mineral Admixtures on Early-Age Autogenous Shrinkage of High-Performance Concrete
- Research on Fabricating of Square Aperture Spherical Micro-Lens Array through the Laser Lithography
- Study on Hollow Microspheres with Conductive and Magnetic Properties
- Chapter 2: Mechanical Engineering and Manufacturing
- Deformation Analysis for Hydrostatic Rotary Table of Heavy Duty CNC Machine Tool
- The Car Brake System Design and Calculation
- Eddy Current Detection for Weld Defect and Automatic Separating System for Defective HFW Pipe
- Thermal Management Simulation of Lithium Ion Batteries for EV/HEV
- Numerical Implementation of a Multi-Physical Fields Coupling Constitute Model
- Solutions for the Finite Deformation Elastic Rod Nonlinear Wave Equation
- Design and Analysis of a Transmission Mechanism for Aerostatic Guideway
- Reliability Analysis on Anti-Overturning Stability for Truck Crane
- Manufacturing Technique and Bacteriostatic Property Evaluation of Polyvinyl Alcohol/Sodium Alginate/Angelicae Dahuricae Radix Fibrous Membrane
- Manufacturing Technique and Property Evaluations of Protective Textiles
- Study on Release Process of Micro-CAES Used Screw Expander
- Investigation on a New Type of Pneumatic Flexible Joint
- Similar Structure of Solution for the Model of Nonlinear Spherical Seepage in Composite Reservoir
- Analysis of Turbine Impeller Vibration Test Equipment
- Thermal Analysis and Optimization of High Power LED Automotive Headlamp Cooling Device
- Biomechanics Quick Response System Research of Vault Technical Training
- Fracturing Well Production Dynamic Simulation in Fractured Tight Sandstone Gas Reservoir
- The Achievement of Dynamic Load Simulator of Servo Mechanism of Multiple DOF Thrust Vector
- High Temperature and High Pressure ESP Performance Testing System Design
- Torsional Vibration Analysis for Large-Scale Reciprocating Compressor Crankshaft
- The Mechanical Design and Simulation of Marine In-Pipe Robot Based on Metamorphic Mechanism
- Influence of Cutting Parameters on Vibration Acceleration in Micro-End-Milling
- Life Estimation of Hub Bearing Unit Based on Test Load Spectrum
- Parameters Optimization of Multistage Pump-Off Propped Fracturing in Thick Formation
- A Gluing Device Based on PLC for Manufacturing Flap-Disks
- Analysis on Mechanical Parameters at SCC Tip in Fusion Boundary Region of Dissimilar Weld Joint
- Optimization Techniques in Numerical Simulation of Casting Process
- Vibration Performance Analysis on Gear Systems
- Parallel Machine Scheduling with Fuzzy due Date Using Improved Simulated Annealing in Lean Production
- The Disassembly Process and Apparatus of Waste Printed Circuit Board Assembly for Reusing the Components
- Principle Analysis of Profiled Bar Turning Peeling Machine
- Finite Element Modeling and Strength Analysis of Boom System of Concrete Pump Truck
- Load Spectrum Research of CNC Machine Tools Based on the Machining Information
- Research on Test-Bed of Durable Performance Experiment for Pilot Operated Directional Valve
- Experiment Study on Improving Lubrication of Gundrill under MQL by Shoulder Dub-Off Modification
- Tubing Cleaning Nozzle Assembly Structure Improvement and Numerical Simulation
- Study on Diffusive Wear and Hardness of Driller of Machining Deep Hole in Sheet
- Exploring Autofrettage Process to Improve the Fatigue Life on High-Pressure Cylinder
- Research on the Anti-Vibration Technology of Large Cross-Section Conductor
- Study of Cell Electrowetting Characteristic on the Bio-Electrode Surface
- Research on the Turbocharger Technology of Piston Aircraft Engine
- The Analysis of Bioprosthetic Heart Valve with Different Suture Densities
- Comparison of Cell Wall Microstructure of Aluminum Foams Produced by Melt Foaming and Gas Injection Foaming Processes
- Numerical Analysis of General Groove Geometry for Dry Gas Seals
- Study on the Removal Function of Annular Polishing Pad Based on the Computer Controlled Polishing Technology
- Effect of Cracked Blade Distribution on Vibration Characteristics of Centrifugal Impeller
- Experimental Study on Double-Piston Gas Prover
- Numerical Simulation of Temperature Field of Gears in Quenching Process
- CNC Machining Based on UG for Stamping Die of Waveform Spring
- Study on the Value Chain System and the Operation Mechanism of the Service Enhanced Construction
- Investigation of Shape Retention of Inflatable Structures Based on Experiments and Fluid-Structure Interaction Analysis
- Study on Fatigue of Hinge Sleeve of Cubic Press based on ANSYS
- Mechanics Simulation of Lathe Tool Fixture and Tool Carrier in CNC Machine Tool for Guide Disc
- Effect of Strength Matching of Welded Joint on Stress Corrosion Cracking in Nuclear Power Structures
- Parameter Optimization Experiment of Magnetorheological Bearing
- Study on Rolling Element Bearing Fault Diagnosis Methods Based on Ensemble Empirical Mode Decomposition
- N-C Lathe Cutting Force Measurement Research
- Workspace and Control System Study for Arc Welding Robot
- A Comparative Study of Firefly Algorithm and Shuffled Frog-Leaping Algorithm for Constrained Free and Manufacturing Optimization Problems
- Research on Characteristics of Joint Point of Power Transmission Tower
- An Image-Based Method for Automatic Crack Detection for the Mechanical Test of Clinch Joints
- Pipe Length Limit Analysis to Tunnel Vertical Well of Natural Gas Pipeline
- Modeling and Simulation of Gait Analysis of Hexapod Robot
- Studying and Simulation Analysis for Rubber Track of Rescue Robot
- Thermal Design of Automotive Headlamp with High Power LED
- Optimization of Pin-Fin for Electronic Cooling Using Entropy Generation Minimization
- The Simulation Study of Shunt Active Power Filter in the Power System Harmonics Restraint
- A Framewrok of Prototype Compressor Impeller Auto-Test System
- Design and Simulation of a Variable Structure Mobile Robot
- Rapid Development of Novel Integrated Pressure Compensating Emitters
- The Stability of Weft Insertion of CRT – 83 Carpet Rapier Loom
- Investigation of the Electric Vehicle Motor Constant Power Characteristics
- Fracture Parameters Optimization of BZ Oilfield Horizontal Well Integral Fracturing
- Simulation of Wind Characteristics Surrounding a Container Terminal
- Research on the Insulation Performance of Sound-Isolating and Decoupled Tiles
- A New Method of Design of Epicyclic Gear Trains
- Development and Research of Foundation Pit Fluid-Solid Coupling Finite Element Analysis Software Based on Automatic Parametric Modeling
- Chapter 3: Automation, Information Technologies and Data Processing
- Electromechanical Hybrid Transmission Control System of Tension Leveler
- The Characters of Dual Harmonic Frames of Subspaces and Applications in Signal Processing Theory
- Multisource Image Fusion Based on DWT and Simplified Pulse Coupled Neural Network
- Research on ACO Algorithm Based on Scholarship Mechanism
- The Research on Hydraulic Components Data Monitoring and Management System Based on Network Real-Time Monitoring
- The Implementation Based on the Improved IEEE802.15.4e Network of the Elder Monitoring System
- Performance Test Method of the Mixed-Mode Interface of an Integrated-Sensor RFID System
- A New Kind of Infinite Series and its Applications on Neural Networks
- The DES Algorithm Based on DSP Technology
- Research on Multiple Security Authentication Protocol in RFID System
- Development of Electronic Control Unit for Air Suspension with Fuzzy Control
- Research on Obstacle Avoidance Behavior of Ultrasonic Sensor-Based Robot
- A Model of Detector Generation Based on Immune Recognition and Redundancy Optimization
- Simulation Analysis of Automatic Grouting Network Control System Based on Matlab
- Maintaining and Updating the Storing Data by the Control Points
- Three-Dimensional Seepage Field Analysis of Thick Overburden CFRD after Sealing Failure
- Calculating the Synthetic Efficiency of Hydroturbine Based on the BP Neural Network and Elman Neural Network
- Research on Control Strategy of Triple Bi-Directional DC/DC Converter
- Research on the Algorithm of Intelligent Test System
- Evaluation of Measurement Uncertainty from Imperfect Data
- Medium Access Control Based on Adaptive Sleeping and Probabilistic Routing for Delay Tolerant Mobile Sensor Networks
- A Distributed Peer to Peer Simulator
- HKad: A Hierarchical Kademlia Model
- Scheduling System for Cloud Federation across Multi-Data Center
- Research on Ship Course Control Based on Course Signal Filter
- Multitarget Track-Before-Detect via MeMBer Filtering and Track Consistency Test
- Robust Control of Uncertain Singular Systems with Distributed Delays
- A Dynamic ID-Based Authentication Scheme Based on ECC for Telecare Medicine Information Systems
- Remote Supervisory System of Classroom Lighting Based on LonWorks Fieldbus
- Design of Automobile-Reversing Radar Control System Based on Ultrasonic
- Design of High Speed Data Acquisition System Based on FPGA
- Design of Audio Spectrum Display Based on ARM
- Decoupling Control of the Gas Collectors' Pressure System Based on Neural Network Inverse System
- Palmprint Authentication Based on DCT-Based Watermarking
- The Sinter Mixture Moisture Control System Based on Fuzzy PID Controller
- Control Design of the Micro-Flow Liquid Feeding System in the Drop Analyzer
- Format Optimization for Periodical Snapshot Output in CFD Simulation
- An Improved Clustering Method Based on Data Field
- Design of Visual Interface for Underwater Robot Control Based on VC ++
- Platform of Image Acquisition and Processing Based on DSP and FPGA
- Analysis and Simulation System for Stepper Motor Controller
- Real-Time Driver Fatigue Detection Based on Eye State Recognition
- Design of Slope Deformation Monitoring System Based on WSN
- A Design for Carrier Wave Catching to Micro-Dynamic Signal in USB/UCB
- The Research and Design of Data Aggregation Technique in WSNs
- Application of Local Wave Method in the Structural Health Monitoring Signal Decomposition
- Truncation Method for Chance Measure
- Comparison of Sewage Treatment Mixer in Three Pool Face Boundary Conditions
- Research of User Experience and Data Mining for Stereo Vision
- Study on Molecular Weight of Natural Rubber with Different Initial Moisture Contents Dried by Microwave
- The New Fast Algorithm Based on Transposed Matrix for Frequent Sets Mining of Association Rule
- Classification Research of Rotation Speed Measurement
- The Stability of the Second-Order Model of the Damping Single Maching Infinite Bus Bar System
- Stabilization of a Class of Two-Dimensional Critical Control Systems
- A New Approach for 3D Edge Extraction by Fusing Point Clouds and Digital Images
- Study on the Application of Damping Control Method in Multi-Solution Interval of the QZS System
- Parallel Rendering Strategies for 3D Emulational Scene of Live Working
- Robust Visual Tracking Using Particle Filtering on SL(3) Group
- Gaussian Noised Single-Image Super Resolution Reconstruction
- The Simulated Annealing Algorithm Based on Multi-Populations Application of TSP
- Design and Realization of a Certain Type of Radio RF Circuit Board Detecting and Teaching Platform
- A Urinary Sediment Segmentation Algorithm of Cast and Epithelial Cells
- Research on Target Tracking Algorithm Based on Particle Filter and Mean-Shift
- The Design of Car Taillight Controller Based on VHDL
- Calculation of Angular Variation of Spacecraft Assembly Considering Measurement Uncertainty
- A Modified Version of the K-Means Algorithm Based on the Shape Similarity Distance
- Consensus of Discrete-Time Second-Order Multi-Agent Systems with Partial Information Transmission
- The Design of Speed Detector Based on Wireless Sensor Network
- Asymptotic Stability of Discrete Singular Bilinear Systems
- Dependence of Oscillation of Spiking Neural Population on Strength of Inhibitory Feedback
- Intraoral Dental Directly Study of the Three-Dimensional Measuring Method
- An Image Fusion Method Based on Fuzzy Regional Characteristics
- Stock Index Prediction Based on Multi-Level Transfer Function Quantum Neural Tree
- AC-DC Decoupling Algorithm of Optimal Power Flow with HVDC System
- A Shunt Active Filter Based on Voltage Detection for Harmonic Filtering and Resonance Suppression
- Temperature Data Gathering System Based on A-Wire Bus
- Material Texture Image Model Optimization and Result Analysis
- Research on Application of Extended Mean-Shift Algorithm in Image Smoothing
- Design of SCR Control Software Based on Dual-Core Processor
- Research on the Network Security Protocols Based on the Strand Spaces Theory
- Identification of Excitation Forces and Prediction of the Radiation by Measured Structural Vibrations from an Underwater Structure
- Car GPS Antenna Electromagnetic Compatibility of the Simulation Study
- Calculation of the Average Length of Functionalized MWCNTs
- Application of Encryption Lock in the Power Simulation Training Software Information Protection
- Research on Application of Wavelet Denoising Method Based on Signal to Noise Ratio in the Bench Test
- Research in Test Case Method in Software Testing
- Extraction Method for the Surface Image Defects of the Magnetic Tile Based on Adaptive Gaussian Filtering
- Using Open Source to Construct a UAV-Based Photogrammetric Data Acquisition System
- The Technology of Ultrasound for Measuring the Thickness of the Pipe Lining
- Research on the Risk Assessment of IPD Mode Based on the Fuzzy Comprehensive Evaluation
- The Research of New Selective Leakage Protection Device Based on Additional DC and Zero-Sequence Power
- Research on the Online Verification Instrument for Diaphragm Gas Meter
- Experimental Study of Fuzzy PI Controller of HEV DC/DC Converter
- A Method of Extracting Feature of Phonic Signal Based on the Matrix Analysis
- Fuzzy Domain Image Segmentation Based on Space Information
- Frequency-Dependent Transmission Line Fractional Model and its Solution Based on Skin Effect
- Research on Soft-Sensing Technique of Vehicle State Parameters
- Simulation Analysis for Sensitivity Distribution of Aero-Engine Inlet Electrostatic Sensor
- A Developing Flood Automation System
- Authentication System for Biometric Applications Using Mobile Devices
- Authentication System Using EEG Biometric for Smart Home
- Research of Flatting of Image Data of Human Movement
- A Solution to Multi Objective Optimal Power Flow Using Hybrid Cultural-Based Differential Evolution
- A Novel Chipless RFID Tag with Multi-Resonators Based on Frequency Selective Surface
- A Ceramic Filter Counter Blowing Regeneration Control System
- Based on the LabVIEW Electrified Railway Signal Acquisition and Processing System of Electromagnetic Radiation
- Eye State Detection Based on Embedded Linux System
- Control and Communication Techniques of High-Speed Railway Train Wheel-Set Running-In Test Based on LabVIEW
- Secure and Efficient Certificateless Signature and Blind Signature Scheme from Pairings
- Coordinated Control Strategy of Distributed Photovoltaic Generation and Load
- The Method of Infrared Point Target Detection and Tracking Based on DSP+FPGA
- Design and Implementation of Selcal Controller
- Hybridizing Adaptive Biogeography-Based Optimization with Differential Evolution for Global Numerical Optimization
- Application of Artificial Potential Fields in the Hydrographic Measurement Control System
- Texture Feature-Based Particle Filter Video Tracking Using Cooccurrence Matrices
- Research on the Cooperative Control Method for Trajectory Tracking of Automatic Guided Vehicle Based on Dynamic Position/Force
- Automotive CAN Bus Diagnostic Device Development
- Research on Electrohydraulic Position Servo System Control of Honing Machine
- The Research of the Straddled Jaeger Salto with a 1/2 Turn of the Olympic Champion Kexin He
- A Palmprint Recognition Based on Collaborative Representation
- Research on Core Competitiveness of Real Estate Enterprise Based on Factor Analysis and Clustering Analysis
- Surface Roughness Measurement Analysis
- Study on Dynamic Phase Correction Method for Improving the Test Accuracy of the Pneumatic Shape Measuring Roll
- Research of Radar Waveform Based on Pulse Position Jitter and Relative LPI Performance Analysis
- Control of Pneumatic Servo System Based on Neural Network PID Algorithm
- The Research on Development Status and Key Technology of Elastic Wave CT
- A New Method Based on Position Sensitive Detectors to Measure Spatial Angle of Large-Scale Gyroidal
- The Research of Intelligent Seat Belt Pretension System Based on Active Safety
- Research on Passivity-Based ADRC of Direct-Drive Wind Power System Back to Back PWM Converter
- The Application of the UPFC in Power System
- Machine Vision and Applications
- Servo-Control System Design of Automatic Production Line Based on PLC and HMI
- Research on Computer Controlled Optical Surfacing (CCOS) Working Function at Wear State
- Design of Embedded Controller with Flexible Programming for Industrial Robot
- Design of Brushless DC Motor Controller Based on DSP
- Chapter 4: Engineering Management and Product Design
- A Holistic Incentive Model of Information Sharing in Supply Chain
- Affective Product Design Based on Random Forest and Association Rules
- Supply Chain Design Strategy Based on E-Commerce
- Study of Agricultural Product Logistics Information System Based on Multi-Agent
- Research on Evaluation of the Modern Logistics Enterprise Technological Innovation Ability Based on SEM
- The Obstructions that Hamper the Use of BIM in China and its Solutions
- Comparative Study of Well Known Sequencing Methodologies and Differential Evolution: A Case Study of Thailand Garment Industries
- Empirical Investigation on the Regional Correlation of Housing Price Fluctuations - Take Shaanxi as an Example
- Cognitive Characteristics of Industrial Architecture
- The Design and the Development of Shading Jacquard Fabrics for Curtains
- Lean Cost Analysis Based on BIM Modeling for Construction Project
- Development Status and Prospect of Forestry Machinery in China
- A System Model for Assessment on Creation Capabilities of Construction Service Enterprises in China
- Optimization Model and Algorithm for Smart Distribution Grid Maintenance Scheduling
- Offshoring Floating Wind Turbine Platform Initial Design Requirement Considering Whole-Life Cycle
- Simulation and On-Site Performance of a Novel 3D Concentrator for Photovoltaic Application
- The Excavating Stability Study of a Power Station Underground Plan
- Architecture Analysis Method Study Based on EID
- Using the Concept of Utility Solution Resource Allocation Problem with the Order
- Semi-Definite Programming Based Waveform Design for Spectrum Sensing
- Living Comfortable Strategies for Offices in Taiwan's Hot-Humid Climate
- Design and Exploration on Automobile Crane Mobile Counterweight Balance
- Drilling and Riveting Agencies Rigid Structural Dynamics Analysis of Virtual Prototype
- Research of the Self-Balanced Cable Support System for Large Cross-Section Cable Tunnel
- The Finite Element Analysis for Mechanical Properties of Reinforced FRP Pipe Concrete under Axial Compression - Discussing the Impact of Reinforcement Ratio, Concrete Strength
- Numerical Simulation on Penetration into Double Plates of Annular Jet
- Key Techniques of Direct Driving of Rapid Prototyping Machine within CAD System
- The Study Summarize of Computational Method on Transition Process in Hydropower Units
- Discussion on Development and Application of Remove Automatic Metering Technology of Oil Well
- Design and Antiknock Impact Performance Analysis of New Mine Refuge Chamber Cabin of Waterproof and Antitoxic
- The Design of Force-Displacement Characteristics Test System for Electromagnet
- Best Scheduling Plan Choice Based on Mathematical Model
- Analysis and Simulation of Mineral Grading Sieve Mechanism Motion Based on ADAMS
- Dynamic Response Analysis of Asphalt Pavement on Steel Deck under Design Loads
- Error Sensitivity Analysis for Machine Tool Based on Three-Dimensional Vector Chain
- Analysis and Optimization of the Rubik's Cube Center Shaft Injection Based on Moldflow Software
- Effect of Turbulence Model on Simulation of Vehicle Aerodynamic Characteristics Based on XFlow
- Economic Analysis on Application of Large Section Conductor in Ultra-High Voltage DC Engineering
- Evaluation of Groundwater Quality at an Industrial Park Site Zone Using Statistical Analyses: A Case Study in Taiwan
- Research of Integrated Distribution Scheme of Reactive Power Compensation Based on SVG for Coal Mine Power System
- Study on the Optimization of Public Construction Project Duration
- A Study on Public Construction Project Duration Risk Identification and Evaluation
- Reasons for Formation Damage and Preparation for Disentanglement Agent in Low Permeability Oilfield
- Modal Analysis and Application Based on Finite Element Method
- Design of a New Piezoelectric Vibrating Feeder
- Experimental Study on the Stability Properties of Different Design of Tandem Wing Airship Models
- The Commercial Real Estate Operation Stages Risk Analysis Based on the ISM Model
- Advanced Technology Research on the System of City Passenger Rail Vehicle Doors
- Application of Frequency Conversion Technology in the Constant Pressure Water Supply System
- Design of Temperature Detection Alarm Circuit Based on Multisim
- The Design of Ultrasonic Ranging Car Collision Prevention Alarm System
- A Differentiated Registration Method for Complex Surfaces
- Optimization for Limited Resource Schedule in Public Construction Project
- Design and Simulation of a High-Isolation Series/Shunt Mixed MEMS Switch
- Application of Operations Research in Management
- A Windchill-Based PDM Application to Enhance Agricultural Machinery Chassis Design
- Twin Gating System Design for Typical Thin Wall Stainless Steel Castings Based on Fast Pouring Mechanism
- Robust Optimization of RFID's Investment in Supply Chain with Inaccurate Inventory
- Operation Optimization of the Airport Check-In System
- Application of Building Information Model Technology in Shanghai Disaster Tolerant Center Construction
- A Modular Factory Planning Approach Based on Vertical Integration of the Information Flow
- Genetic Algorithm for Single Machine Scheduling Problem with Setup Times
- Research of Risk Control of Public Construction Project Based on Fault Tree
- Studies on Sprinklers Arrangement in Sprinkler Systems
Les mer
Produktdetaljer
ISBN
9783037859247
Publisert
2014-02-06
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
3270 gr
Høyde
240 mm
Bredde
170 mm
Dybde
89 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1780