Produktdetaljer
ISBN
9783037859926
Publisert
2014-04-16
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
6300 gr
Høyde
240 mm
Bredde
170 mm
Dybde
165 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
3300
Collection of selected, peer reviewed papers from the 4th International Conference on Frontiers of Manufacturing and Design Science (ICFMD 2013), September 10-12, 2013, Hong Kong, China.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 660 papers are grouped as follows:
Chapter 1: Materials Engineering, Processing of Materials and Chemical Technologies;
Chapter 2: Research and Design of Machinery, Equipment and Technological Processes in Mechanical Engineering;
Chapter 3: Mechatronics, Control and Automation of Manufacturing Processes;
Chapter 4: Information and Communication Technologies, Processing of Data and Signal;
Chapter 5: Materials and Technologies in Construction;
Chapter 6: Product Design and Engineering Management;
Chapter 7: Urban Planning, Transportation and Environment
Les mer
<p>Selected, peer reviewed papers from the 4th International Conference on Frontiers of Manufacturing and Design Science (ICFMD 2013), September 10-12, 2013, Hong Kong, China</p>
- Preface, Committees and Sponsors
- Chapter 1: Materials Engineering, Processing of Materials and Chemical Technologies
- Effect of Tempering Temperature on Mechanical Properties of 40CrMnSiB Steel
- Cooling-Performance Estimation of the Composite-Graphite Heat Sink with Annular Conductive Base for LED Lamp
- Preparation and Characterization of SrAl2O4: Eu2+, Dy3+ Luminescent Nanofibers
- A Competitive Model Reaction for the Ribosomal Peptide Bond Formation Catalyzed by Peptidyl Transferase
- A MD Study on the Temperature Influence on Ni/Al Interface at Initial Diffusion Time
- A One-Port Waveguide Method and its Application in Characterization of Radar Absorbing Materials
- Ag-Loaded Wool Spherical-Like Bi2WO6 Nanoarchitectures Photocatalyst Degrade Pigments
- All-Solid-States Thin Film Lithium-Ion Micro-Battery with SnOX Films Doped with Cu as Negative Electrode
- Candida rugosa Lipase Adsorption on Nylon-6: Optimization, Kinetic and Thermodynamic Analysis
- [Omim][Pro] Amino Acid Ionic Liquids as a Corrosion Inhibitor for Copper in 3.5 % NaCl Solution
- Research on Spheroidizing Annealing Progress of 38CrMoAl
- Environmental Impacts Assessment of Liquid Crystal Extraction From Wasted LCD Panels
- Research and Application of Micro-Arc Oxidation Technology on Magnesium Alloy Motorcycle Key Parts
- Modification of Epoxy Resin by Reactive Block Copolymer SEBSMB
- Influence of Composition and Heat Process to Performance of End Forging with Flange
- Based on the Gradient Source Representation of Functionally Gradient Materials
- Hydroscopicity and Dielectric Properties of Polyimide Containing Biphenyl and Bis-Benzimidazole Rings
- Sheet Polymeric Iron (III) Porphyrin Complexes Catalytic Oxidation of Styrene with Molecular Oxygen
- Semi-Solid State Joining of Aluminum Alloys under Nitrogen Shielding Gas
- Application of IR-Spectroscopy for Study of Alumosilicate Raw Materials
- Production Technology and Key Equipments for Ceramsite Produced from Coal Fly Ash and Clay
- Study on the Structures and Surface Forces of Different Carbon Blacks by Atomic Force Microscopy
- Study on the Microstructure and Mechanical Properties of Welding Joints of 7A05 Aluminum Alloy by FSW
- The Study on the Degreasing Technology of Silk Floss Treated with Leaching Method
- The Effect of 0.3%La Adding into As-Casting LA141 Alloy and then Rolls to Thin Plates
- Preparation of PVP/TEOS/Nitrates Composite Nanofibers
- The Effect of Elastic Pre-Bending on the Laser Peen Forming of 2024-T351 Aluminum Alloy Plate
- Study on Safety of Model II Powdery Emulsion Explosive
- Analysis of Low-Cycle Fatigue Crack Growth for Stiffened Plate Based on Accumulative Plastic Strain
- Research on Technology of High-Pressure Water Jet Incremental Sheet Metal Forming
- Degradation of a Phenolic β-O-4 Lignin Model Dimer by Electrochemically Mediated Delignification System with Violuric Acid
- Novel Gas Diffusion Electrode System for Effective Production of Hydrogen Peroxide
- Study on Active Compounds of Apocynum venetum L
- Using PVA and PVA & Cationic Starch to Improve the Strength of High-Yield Pulp
- Enhancement of Pulp Strength by Forming Polyelectrolyte Multilayers on APMP Fibers
- Enhanced Hydrolysis of Hemicellulose in Corn Stalk by Alkali Pretreatment
- Kinetics of Electrochemical Delignification Mediated with Violuric Acid
- Modification of Cellulosic Fibers and Adsorption of Chromium (VI) Ion from Dilute Aqueous Solution
- Numerical Simulation on the Process of Al-Alloy Air Cushion Continuous Casting
- Study on Synthesis of Epoxy Resin Modified with Polysiloxane
- Preparation and Photoluminescence of Fe-Doped In2O3 Nanowires
- The Wearability Research of New Environmentally Friendly Acrylic Fiber
- Effect of the Sols’ Zinc Ions’ Concentration on Structural and Optical Properties of (Cu, Al) Co-Doped ZnO Thin Film by Sol - Gel Method
- Influence of Temperature Rise in Penetration of Wf/Zr-Based Amorphous Matrix Composite Projectile on Target Material
- Study on Cashmere Fibers Shrink-Proofing by Potassium Permanganate Based on Fuzz Mathematics Method
- Dynamic Analysis of Metal Circular Saw Blade
- Fabrication of Vanadium Oxide Film with Low Phase Transition Temperature by Magnetron Sputtering and Reduction Post-Anneal Method
- The Aging Characteristics of Composite Insulators under Salt Fog Conditions
- The Development and Application of Superfine Shaped Acrylic Fiber on Bedclothes
- The Synthesized of Nano-SiO2 and Silicon Modified Polyacrylate Emulsion
- Study on Thermal Degradation Characteristics of Pre-Treated Paraffin
- Hexagonal Representative Volume Element for Modeling and Analysis of Mechanical Properties of Carbon Nanotube Reinforced Composites
- Influences of Thermal Gradient and Solidus Velocity on Porosity Content in A201 Aluminum Alloy Castings
- Removal of Cesium from Aqueous Solution Using PAN-Based Ferrocyanide Composite Spheres: Adsorption on a Fixed-Bed Column
- Effect of NH4HCO3 Contents on the Microstructure of the Microwave Sintered Porous NiTi Alloys
- Discussion on Loading Moment of Forging Force in Aluminum Alloy Spot Welding
- Effect of Si on the Wettability of SiC/Al System
- Hot Isostatic Pressing of Ti6Al4V Alloys Monolithic Bladed Disks
- Evolution of Material and Properties of CWRM-1700 Rolls
- Microstructures and Properties of Abrasion-Resistant Cobalt-Base Alloy K-C20WN Prepared by Centrifugal Casting
- Microstructure and Properties of Welding Joints of 7A52 Aluminium Alloy by the Friction Stir Welding
- Photocatalytic Performance of BiOCl Nanosheets Composite with Graphene
- Synthesis and Optical Properties Study of ZnS Crystallitic Films
- Comparison of Constitutive Laws on the Modeling of Thermo-Viscoplastic Behaviour of an Aluminum Alloy
- The Numerical Analysis and Simulation of Ni-Ti/Si Shape Memory Alloy Micro Valveless Pump
- Effect of Compatibilizer and Flexibilizer on the Mechanical Properties of Acrylonitrile-Butadiene-Styrene)/Poly(Methyl Methacrylate) Blends
- Notch Sensitivity of Poly(Acrylonitrile-Butadiene-Styrene)/Poly(Methyl Methacrylate)/Ethylene Methacrylate Co-Polymer (EMA) Composites
- Study on the Mechanical Properties and Surface Gloss of Acrylonitrile Butadiene-Styrene/Poly(Methyl Methacrylate)/Ethylene Methacrylate Copolymer (EMA) Composites
- Atmospheric Corrosion of AZ80 Magnesium Alloy
- Effect of Sr Addition on Microstructure and Mechanical Properties of Semi-Solid 2024 Al Alloys
- Corrosion Behavior Study of 22MnB5 Steel and its Weld Using Electrochemical Method
- Gear Application Feasibility Study of Functionally Gradient Material
- Preparation and Properties of (SiCp+Al2O3f)/7075Al Composites by Pressure Infiltration
- Photoluminescence Property of ZnO:Eu Hollow Nanofibers Fabricated by Sputtering Using Electrospun PVP Nanofibers as Templates
- Refining Molten Steel with Argon Blowing by Metal Nozzle Mold Bottom
- Optical Properties of CuAlO2 Synthesized by Sol-Gel Method
- Tensile Properties and Plasticity of Semi-Solid Cast 6061 Al Alloy at Elevated Temperatures
- Investigation of Microstructure and Mechanical Properties of Semi-Solid State Joining of SSM Aluminum Alloys
- Improvement of Performance of Traditional Photocatalysis and Development of New Photocatalysis Materials and Technologies
- Functional Polypropylene/High-Absorption Polyacrylate/Bletilla Striata Nonwoven Fabrics: Process and Characteristic Evaluations
- Preparation and Property Study of PTT/CAB Blend Fibers
- Numerical Characterization of the Effect of Coating Solid on Binder Distribution
- The Influence of Ti/N Ratio on the Effective Boron and Mechanical Properties of Low Carbon Boron Alloyed Bainitic Steel
- The Micro Crack Nucleation Rule and Fracture Behavior of Titanium Aluminum Alloy
- Study on Step Type Vibration Tapping of Superalloy
- Recovery of Copper from Copper Smelter Slag by Flotation
- Research on Au-Bearing Copper Ore in Flotation from Yunnan
- Matching Principle of Material Selection in Product Design
- Hot Working Manufacturing Process of Large Mine-Used Rotary KilnRolling Ring Forgings
- Numerical Simulation of an U-Channel Component Tailored Tempering Process Considering the Effect of Stress on the Shift of TTT Curves
- Structural Optimization of Composite Panel with Lamination Parameters and Equivalent Stiffness Laminate Method
- Effect of Mechanical Refining Treatment on Fiber Grafting Modification
- Mechanical Behaviors and Thermoforming Features of PMMA Used In-Mold Decoration
- Microstructure and Mechanical Properties of Welding Joints of High Nitrogen Steel by Hybrid Laser-Arc Welding
- Analysis and Test: Impregnated Diamond Cutters for Oil Drilling Bit
- Discussion on Finite Element Model for Three Dimensional Rolling Process Analysis
- Analysis of Press-Extrusion Forming for Embossment on the Stamping Part
- Manufacturing Technique and Property Evaluations of Degradable Sound-Absorption Plates
- Effect of Fiber Fineness on Acoustic Absorption Property of Nylon 6/Low-Melting PET/Recycled PET Nonwoven
- Manufacturing Technique and Property Evaluations of Conductive Nonwoven Fabrics
- Electromagnetic Shielding Effectiveness and Manufacturing Technique of Metal Complex Fabrics
- Methods of Swanson Constitutive Model Establishment for Composite Solid Propellant
- The Research on Surface Metamorphic Layer of Punch Matrix in WEDM
- Discussion on Metal Heat Treatment in Nuclear Power Plant
- Research on Mechanical Properties and Appearance of Mulberry Silk Soaked with Clean Water
- An Improved Continuous Gas Lift Design Method with Variable Pressure Drop
- Grinding Experiment Research of Face Gear with CNC Machine
- Research on the Effect of Distributor Aperture Ratio on Fluidization Quality of Vibrated Fluidized Bed
- Study on Improving of the Iron Concentrate Grade Index by Centrifuge
- Machined Surface Quality Improvement Measures Affecting Factors and Research
- Molecular Docking Studies on the Interaction of 2-Arylpropionate Esters with Candida rugosa Lipase
- Comparative Inspection of Terbufos in Blood from Head Skin by GC-MS
- Rapid Detection of H2S in Heart Blood by Chemical Method and GC / MS
- Research Progresses and Development Trends of High-Efficacy Photocatalysts
- Optimization of Super-Long CNT Forests Growth on Conductive Substrate by Water Assisted CVD
- Chapter 2: Research and Design of Machinery, Equipment and Technological Processes in Mechanical Engineering
- Design and Manufacture of a Unilateral Permanent Magnet Linear Motor for Assembly
- Impact of Structure Design of Artififical Upwelling Tube
- Calculation of the Effective Value of the Uplift Depth for the Tower Foundation in Sloping Ground
- The Research of Grouting Sandblasting Carrying Manipulator Based Wax Casting-Line
- A Damage Model for Low Cycle Fatigue Analysis of Stiffened Plates
- Research on Ultimate Strength and Accumulated Plastic Deflection of Box Beam under Cyclic Loading
- Analysis of Fatigue Life in High Temperature of W Pattern Sealing Rings Used in Aircraft Engine
- The Improvement of Complex Structure of Single Cylinder Double Acting Piston Pump
- The Review of Workpiece Loading and Unloading Robot in the Catenary Shot Blasting
- Optimizing Product Development Projects Based on the Clustered Product Design Structure Matrix (DSM)
- Study on Hull Deformation at Supports of Propulsion Shaft of a Large Container Ship
- Research of Reinforce Stress on the Pressure Structure of Submersible Vehicle
- A Numerical Simulation of Steady-State Temperature Field of Natural Gas Engine Piston
- Study on Structural Analysis for One-Cylinder Vertical Engine Assembly by FEA Method
- Study on Modal Analysis for Motorcycle Frame by CAE Method
- Design and Test of Pico Crossflow Turbine for the Generation of Electricity for Use in the Rural Area
- Dynamic Response of Elastic Beam to a Moving Pulse: A Theoretical Study on Critical Velocity
- The Relationship between the Period of Spontaneous Combustion and the Wind Speed
- Suspension Optimum Design Considering Tire and Vehicle Matching
- Structural Optimization Design of Body of Oil-Perforating Gun
- Strength Analysis and Optimal Design on Flip Axis of Steel Roll Clamp
- Design of Transient Electromagnetic Transmitter Based on FPGA
- Study on the Influence of Gear Rattling on Pitting Fatigue Failure
- Design of Impeller of Centrifugal Compressor for Water-Air Engine
- A New Method to Extract Substructures for the Multi-Shaft Transmission
- Design and Validation of Sensor Balance for Propeller Experiment
- Lightweight Design for Coal Mine Rescue Robot’s Swing Arm Brackets
- Crane Wheel-Rail Contact Stresses Research Based on Experimental Test and Finite Element Analysis
- Effect of Welding Procedure on Main Girder Fatigue Property
- Suspension Parameter Design Based on Equivalent Linearization Method
- Design and Analysis of a Novel Mini-Type Centrifugal Friction Speed Limiter
- Structure Design and Simulation of Lithium-Ion Battery Casing Machine
- The Optimization Design of Combination Sleeve Based on ANSYS
- Study on the Performance of Water Lubricated Stern Tube Bearing Based on Fluent
- The Profile Error Feedback Optimization for the Design of a Showerhead System Controlling Gas Flow Uniformity in a Thin-Film Reactor
- Application of Sonic Nozzle in Unsteady Flow Rate Generating System for Compressible Fluid
- Analysis of Structure Characteristics and Improvement of Turbo-Supercharger Bearing
- Causes of Surge of Turbocharger for Marine Diesel Engine and Measures against Surge
- A Novel Simplified Distributor Model of Fluidized Bed Based on the Porous Media Theory
- Optimal Design of a Four-Legged Walking Mechanism Based on Bionics
- Effects of Fuel Supply Advance Angles on Performance of Engine Fueled with Butanol Diesel
- Surveillance Ship with Fuel Cell Performance Analysis and Design
- The Improved Structure of Swash Plate Axial Piston Pump
- Analysis for Initial Status Parameters of Parachute Aircraft
- Research on the Effects of Tires on the Vehicle Handling
- Study on Dynamical Simulation of Swing Movable Teeth Reducer
- The Kinematics Modeling and Simulation of a Mechanical Arm in Nuclear Industry with Postpositional Drive
- Modeling and Simulation of a Certain Warship Diesel Engine Based on AMESim
- Mechanical Design and Analysis of a Tracked Mobile System for Patrol Robot
- Hemispherical Parts Numerical Simulation of Deep Drawing
- Study on the Suck Rod Design and Evaluation
- Analysis of Microstructure and Mechanical Properties of Bearing Inner Ring
- Design and Singularity Analysis for Nine-Bar Mechanism of Three Crank Hybrid Driven
- An Optimal Design of Scrub Radius for Automobile Suspension Based on Adams Simulate
- The Design & Calculation for Hydraulic Cylinder of a Special Machine for Heat Exchanger Tube Bundle Drawing and Assembling
- The Key Technologies in Designing of a Special Machine for Heat Exchanger Tube Bundle Drawing and Assembling
- Optimization Design of Cable-Frame Antennas Based on Tension Compensation Method
- Modeling and Computational Analysis of Diesel Engine Working Process in Plateau Environment
- Process Analysis of Oblique Gibs
- CNC Lathe Drive System Design
- Influence Analysis of Machine Tool’s Turntable Angle Errors to the Roundness of Machined Hole
- The Bottle Opener Stamping Mold Design
- The Effect of the Pressure Drop Ratio on the Performance of a Novel Dynamic Hydrocyclone
- Kinematic Analysis of a Spatial 6-Bar Linkage Mechanism
- The Finite Element Analysis of Derrick Translation System in Vehicular Pressure Balance Workover Rig
- The Kinematics Simulation Analysis of a Spike-Picking Roller for a New Self-Propelled Maize Harvester Based on ADAMS
- Study on Valve Train Analysis for One-Cylinder Vertical Engine
- Simulation Analysis and Studying of Die Casting Forming Process for Crankcase
- Research on the Pulse Current Distribution of the Hollow Cylinder Surface
- The Mechanical System Structure Design and Kinematics Analysis of the Bipedal Humanoid Robot Leg
- The Design of Flexible Bearing Life Test Device
- Biaxial Stretching Technology and its Development
- The Design of a Small Composting System and Turning Device
- A Height Adjustable Tool Holder
- Analysis of Off-Design Flow Field and Prediction of Performance in Hydraulic Turbine
- Comparative Analysis of Hydraulic Energy-Dissipation Damper Performance Based on AMESim
- Structure Improvement Analysis of Maize Root Stubble Harvester
- Gas Storage Cavity Simulation Experiment Research and Application
- Identification of the Lumped Parameters for Hydraulic Bushing Based on FSI Finite Element Simulation
- Structure Optimization Design of Vane Steering Pump
- Research for Breaking Explosives Green Safe Technology and Advanced
- Simulation of Gas-Solid Flow Characteristics in Three-Dimensional Rotational Spouted-Fluidized Bed
- Analysis of Stimulated Brillouin Scattering in a Single Mode Fiber Ring
- Studies on the Prediction of Landing Impact for Airborne Vehicle
- Simulation of Transmission Efficiency for Different Bending Radius of Aerosol Sampling Inlet
- New Method of Fault Knowledge Acquisition of Electronic Equipment
- Simulation and Optimization on Dynamic Hydraulic Drawing for Spiral Bottom Shell Parts
- Equipment Design for Supercritical Cleavage Technology
- Application of π Equivalent Circuit in Mathematic Modeling and Simulation of Gas Pipeline
- Maintenance Study of a Pilot Biomass Pyrolysis Installation
- Research on Fault Diagnosis Method of Steam Turbine Unit Based on the Theory of Super Ball
- Based on Maximo Preventive Maintenance of the Crane
- Analysis of Vibration Characteristics for Wind Turbine Gearbox
- Parameter Design and Simulation Research of Power System for Electric Vehicle
- Numerical Simulation Analysis for Influence of Lateral Inclination Angle on the Yacht Resistance
- Design of Pneumatic System in Warm Extrusion Forming Process Manipulator for Steel Connecting Sleeve
- Discussion Based on the Condition of Transformer Parallel Operation
- Fluid Factors Research in High Pressure Abrasive Water Jet
- Analysis of Mechanical Seal Leakage within Hydrostatic on Nuclear Reactor Coolant Pump
- Quantitative Assessment on Blast Effects of the Boiler BLEVE
- State of Charge Estimation of Lithium-Ion Battery Using Extended Kalman Filter Based on a Comprehensive Model
- Forecasting Algorithm of Heavy Vehicle Roll over Based on Road Collaborative
- Design a Kind of Oblique-Cone-Sliding-Ring Assembly Seal Device
- Study on Pneumatic Control of Shotcrete Machine Booster Manipulator
- Modal Testing and Analysis of Z-Axis Supporting Plate for High–Speed PCB NC Drilling Machine
- Chilled Energy Storage for Air-Conditioning System of Buildings
- Modeling and Simulation for the Feed System of CNC Machine
- Analysis of Pre-Tightening Strength of Ship Tail Shaft Coupling Based on Workbench Software
- Nissan Car Test Bench Research Production and Use of Teaching
- Simulation Research on Resistive Coupling of High-Speed Railway
- Analysis of the Improvement of the Drawing Die in Drawing Device
- A Novel Design on Uniform Heating Wire Coil of Induction Cooker
- Magnetic Levitation and Rotation for Feasibility of Free-Form Machining
- Elasto-Plastic Fracture Analysis of Finite-Width Cracked Stiffened Plate
- Study and Design on High Temperature Air Combustion of Hot Blast Stove
- The Influences of the Load Distribution Pattern and the Position of the Locomotive on Train Longitudinal Dynamics
- Mechanism Modeling and Analysis of a Small Unmanned Vehicles Using Vortex Lattice Method
- Study on the Recovery Circuit Based on Multi-Module STRETCH Meat Grinder
- An Improved VSVPWM Strategy of Considering Neutral-Point Potential Balancing in Three-Level NPC Converter
- Research on Temperature Distribution for Tubing Liquid with Hot Natural Gas Injected Annulus Using Gas Lift
- Study on Dynamic Characters of Interaction Effect of Precision Machine Tool-Box Foundation-Soil
- Design Parameters Sensitivity Analysis of Lathe Saddle
- The Research of the New High Voltage Reactive Power Compensation Device Based on the Compound Switch
- Discussion the Method of the Flocculation Flow Field Measurement by PIV
- Preliminary Exploration of Electrohydrodynamic Wind Power
- Design and Simulation of an Improved Doherty Power Amplifier
- Design of NdFeB Permanent Magnet DC Generator
- Research of Factors Affecting the Yarn Tension of a Winding Machine
- The Fault of Hydraulic System and Troubleshooting
- A Solar Battery Structure for Consumer Electronic Devices
- Design of Vibration Isolation Device for Ship Power Equipment and Investigation on its Dynamic Properties
- Research on Cushion Characteristics of Self-Inflating Buffering Airbag
- Vibration Testing System for Ventilator Based on Virtual Instrument
- Study of Frequency Conversion Energy-Saving Reconstruction for Central Air-Conditioning
- Research of Stress Assessment Based on Singularity Strength
- Structural Analysis and Optimization of Electric Scraper Drive Axle Housing under Multi-Load
- RF Coaxial Open Standard Calibration Technology Research
- Wavefront Aberration Detection: A New Perspective
- Finite Element Modeling of Optical Path Length Control Device for Laser Gyroscope
- The Research of IC Test Based on LTX-77 Test System
- Researches of the Measurement Instrument in the Plastic Injection Machine Bore and Data Processing
- The Design of Ward Calling System Based on SCM
- Study on Inner Cooling Grinding in a General Surface Grinding Machine
- Nonlinear Dynamic Analysis of Rigid - Loose Coupling Bidirectional Vibrating-Crushing System
- Research and Implementation of IVI-COM Driver for Digital Oscilloscope
- The Design of Food Safety Rapid Detection Equipment
- Design of Multi-Channel Physiological Signal Monitor Based on Wireless Data Transmission
- The Study on the High-Speed Electrified Railway Electromagnetic Interference Impact
- Turning in Place of Grinding Application and Exploration in the Actual Processing
- Chapter 3: Mechatronics, Control and Automation of Manufacturing Processes
- Fuzzy PID Control System for Sludge Digestion Tank Temperature
- Research on the Cooling Fan Speed Control Scheme of the Large Power Vehicular Diesel Engine in Altitude Environment
- Study on Co-Simulation and Experiment of a Series-Parallel Hybrid Electric Vehicle
- Optimal Selecting Strategy for Tool Size of High Efficiency Milling of Complex Curved Surface
- Typical Structure Parts Library Design and Research on Machine Tool Fixture
- Fault Tolerant Permanent Magnet Motor 's SVPWM Control and Analysis of Fault-Tolerant Performance under Fault Conditions
- Research on Control System of Quasi-Homogeneous Lean-Burn Engine
- Air Thin-Walled Parts Machining Precision Control
- Virtual Prototyping Simulation of Flexible Multi-Point Auxiliary Support Fixture for Blade Machining
- Research on Torque Control of Brushless DC Motor for Electric Vehicle
- Design of Soft-Switched Inverter
- Research on Static Stiffness Test System for BIW
- Design of Electromagnetism Compatibility for Automatic Loading System
- Research on the Influence of Load Disturbance on the Crystallizer PID Control System
- The Design and Research of Active Clamp Forward Converter Based on IR1150
- The Detection on Hydraulic of a Certain Type Equipment Based on C8051F020
- Design of High Accuracy Robot Welding Machine for a Cone Bottom
- Disturbed Chaotic Systems Synchronization via Robust Mixed Functional Projective Method
- Defect Detection of the Segmental Spherical Shell Based on Ultrasonic Transducer Array
- Dry-Mixed Mortar Control System Based on Fieldbus and PLC
- Intelligent Identification and Locating System of Steel Coil Based on Laser Technology
- Research on Open CNC System for Rolling Machine Based on PMAC
- Research on the Shift Schedule of Dual Clutch Transmission for Pure Electric Vehicle
- Research of Single-Device Test Based on Relay Protection Simulation and Training System
- Design and Implementation of the Airborne Laser Effector for Autonomous Pipeline Alignment
- The Application and Improve of Fuzzy Clustering in Classifying Control Targets
- Simulation Analysis of Synchronization Control for Ultrahigh Pressure Sterilization Equipment Based on AMESim
- Far-Field Energy Density of the Laser Detection System
- Small Module Involute Gear Precise Modeling and NC Machining
- The Variable PWM Frequency Control Research for the Motor in Wheel
- The Timing Control Research for the Motor in Wheel
- Parameter Matching and Performance Simulation for a Distributed Power Extended-Range Electric Vehicle
- Research on Airline Operational Control Model Based on Analytic Hierarchy Process
- Introduction to Intelligent Transportation Vehicle Detector
- Research on a Fiber Bragg Grating Strain Sensor for Tower Vibration
- Monitoring and Control System of Underground Coal Gasification Based on Industrial Ethernet and PLC
- Design of High-Power Diode Laser Power Source by Single Chip
- Design and Development on Full Scope V&V Simulator of Nuclear Power Plant
- Design of High-Speed Communication on the Detection Equipment
- Inter-Stator Synchronous Combined Method Based on SVM-DTC for Primary Winding Discontinuous PMLSM
- Design of Missile Longitudinal Control System Based on Backstepping Control
- Self-Adaptive PID Control of Hydraulic Quadruped Robot
- Research Gravity Compensation for Master Manipulator with Time Delay
- Design of Control System of Brushless DC Motor Based on DSP
- The Visual Analysis of the Research Front in Robot Field Based on Keywords Co-Occurrence
- Research Humanoid Robot Walking Based on Vision-Guided
- PLC-Based Network Control System of Nitrogen Pressure Machine
- A New Design of Laser Pulse Receiver in the Automatic Control System
- Service-Oriented Framework for Oil Fields Automation
- FPGA-Based High Precision and Low EMI Switching Power Supply Design
- Design of Temperature Controllor in Diamond Synthetic Chamber Based on Multi-Objective Particle Swarm Optimization
- Simulation Analysis of Vector Control of Fuzzy-PID System Based on Mine Fanner Load
- Research on the Network Based Protection to Settle the Distribution Networks Three-Phase Short-Circuit Faults with Distributed Generators
- An Ultrasonic Micro Scalpel Based on Exponential Horn Silicon Chip
- Autonomous Control of Non-Silicon MEMS Flexible Micro-Assembly Line
- Research on Dynamics Measurement of Piezoelectric Sensor Based on PVDF Films
- High-Voltage Three-Phase Asynchronous Motor Soft-Starter via Hyristor for Water Cooling System of Steel Mill
- Ceramic Filter against the Regeneration Air Pressure and Flow Control System Design
- The Effective Use in the Process of Numerical Control Technology in Mechanical Manufacturing
- A Method for Measuring Weld Bead in Grinding and Polishing Process
- Design of Intelligent Transmission System for Mining Belt-Conveyor Group
- Visualized Modeling and Simulation of Manufacturing Execution System in Dynamic Job-Shop Scheduling
- Design of Ship Anti-Collision Alarm System Based on Laser Range-Finding
- The Electromagnetic Control Air Pressure Brake Valve in the Research and Application of Vehicle Brake System
- Servo Motor Control System and Method of Auto-Detection of Types of Servo Motors
- An Improvement Geometric Error Identification Method of CNC Machine Tool Based on Double Ball Bar
- A New Type Fatigue Machine Design with High Frequency Large Stroke
- Intelligent Remote Monitoring and Fault Diagnosis of Engineering Machinery System Design
- The Design of New Automatic Loading Control System
- Multi-Axis Spiral Tool Path Generation for Aviation Blade Numerical Control Machining
- Optimal Selection of Cutting Parameters in Blade NC Machining Based on BP Neural Network and Genetic Algorithm
- The Design of Breeding Cotton Growth Management System Based on MMS
- Design and Implementation of the Airport Surface Surveillance System Based on GeoTools
- Research on the Technology of RFID Sliding Sleeve
- Optimal Control of Time-Varying Systems with Multiple Delays for Servo Appplications
- Two Degree of Freedom Helmet Mounted Sight Testing System
- Study on the Characteristics of the Automatic Tracking of Multiple Target Tracking
- Intrinsically Safe for Continuous Automated Production Safety Technology of Unitary Detonating Powder
- A Pearl Automatic Sorting System Based on Image Identification
- Development of Control System for MRS Groundwater Exploration Instrument Based on Ethernet
- The Application of GA-RBF Neural Network Generalized Predictive Control Strategy in Circulating Fluidized Bed Unit
- FPGA Implementation for CCD Driving and Laser Spot Position Detection
- Developing a Communication between Calibration Tool and Electronic Control Unit Based on CCP Protocol
- The Design of Environmental Temperature and Humidity Remote Monitoring System Based on AT89S52 MCU
- Remote Control Stepper Motor Based on the GPRS
- Research and Design of Embedded Crane Video Transfer System
- Design and Application of Energy Monitoring System Based on Serial Port Server and B/S Framework Configuration
- A Design of Model and Algorithm of Intelligent Scheduling System in Enterprise Railway Shunting Plan
- The Research on Fault Diagnosis System of Shimmer Sight Based on Image Analysis
- Water Monitoring System Based on ZigBee Technology
- The MMVC for the Nth Order Linear Discrete-Time Systems under Prospective Strong Intervention
- Design and Application of Monitoring System of Remote Video and Environment to Smart Substations
- Office Automation System Model on Workflow Design
- Synchronous Issue of IR-Based Large Scale Volume Localization System
- Intelligent Smoke Temperature Alarm System Design
- Research of the Misalignments Compensation in Optical Systems Alignment
- Study on Space Tether Retrieval Theory and Technology of Tethered Combination
- Design of a Edubot-Micromouse Based on MCU+FPGA
- Research on Simulation of Applying SVC and STATCOM to Power System in Enterprises
- Two Axes Micromouse PWM Generator Based on FPGA
- Milling Tool Wear Identification Using Information Fusion
- Multi-Agent Based Active Noise Intelligent Control
- Design of Library Lighting Energy Saving System Based on Internet of Things
- Design and Implementation of Remote Environment Surveillance System Based on GPRS
- Analyze a Feedback System with the R-H Stability Criterion
- Wireless Warning System of Positive Pressure SCBA Based on GPRS
- Design and Application of Low Power Wireless Temperature-Measuring System about Wine Fermentation
- Research on the Security Monitoring and Early Warning System of Oil Depot Station
- Research on Real-Time Monitoring and Data Management of Hydraulic Test System Based on LabVIEW
- A Miniature Laser Processing System Based on xPC and Image Processing
- The Power Optimization Control of Shearer Based on ANFIS
- Design of Optimized Controller for Fault Diagnosis of Three Phase Induction Motor Using Genetic Algorithm
- Chapter 4: Information and Communication Technologies, Processing of Data and Signal
- The Random Sampling Method for Gas Sensing Signal Based on Compressed Sensing
- Comparative Study on Sweat Fingerprints Photographic Effects between Full-Band CCD and UV Observing Photograph Systems
- Research and Realization of ADO.NET Database Access Technology
- The Development of Database System of Parameter and Coefficient for the Common Shafting Parts
- The Actual Fusion Technology Application in Automobile Service Teaching
- Research on Improved Association Rules Algorithm for Web-Based Chinese Short Texts
- The Impact of Filter Function on Structural Topology Optimization
- Application of C4.5 Algorithm in Evaluation of Railway Large Maintenance Machinery Construction
- Design of a Manual Calculation System of Drawing Quantity with "Read Schemata”
- A Fast Approach for SLCA in Keyword Query over XML Document
- GSPN-Based Modeling of Virtual Teams Building in Collaborative Process Planning
- Constraint Programming Method for Crew Schedule Recovery
- Direction Finding Using Rotated Long Baseline Interferometer
- A Prototype Hardware for Gas Sensor Arrays Data Acquisition
- Identification of Tool Based on Decision Fusion of Multi Features
- Extensive Particle Swarm Artificial Bee Colony Algorithm for Function Optimization
- Research of Cloud Storage and Improved Distributed Strategy of Data Storage
- A Generalized BoVW Model for Content-Based Image Retrieval
- Study on an Anti-Collision Algorithm of RFID Based on Binary Searching of Backtracking
- Low-Power On-The-Fly Reconfigurable Iterative MIMO Detection and LDPC Decoding Design
- Formation Model of Enterprise Information Capability Research Based on Information Behavior
- Near-Band IR Small Scene Star Image Segmentation Based on Partial Histogram Grey Level
- The Design of Digital Library Platform from the Perspective of Knowledge Management
- Research on XML Data Structural-Integrity in XML Signature
- Communication Security on MASs - A Literature Review
- Research on Horizon Detection Algorithm Based on Dark Channel Prior for Images Captured by UAV
- The Research and Application of USB Interface in the Design of FPGA
- Research on Classification of Privacy Protection Based on Improved Particle Swarm Optimization Algorithm
- Research on Recommendation Algorithm in Social Networks
- Using Single Image Parallelepipeds for Camera Calibration
- An Automatic Target Recognition Algorithm Based on Support Vector Machine
- A XML Document Coding Schema Based on Binary
- Design of FMCW Radar Data Acquisition and Signal Processing System Based on Labview
- Realization of 1024 Points Fast Fourier Transform Based on FPGA IPCore
- Research on E-Commerce Intelligence Based on IOT and Big Data
- Multi-Objective Particle Swarm Optimization with Comparison Scheme and New Pareto-Optimal Search Strategy
- Research on Computing the Covers of a Given Concept
- Research on Security and Reliability Technologies in Cloud Storage
- Intrusion Response Mobile Firewall Design in Ad Hoc Networks and Based on SMP Performance Analysis
- Bayesian MRF Modeling and Graph Cuts for Phase Unwrapping with Discontinuity Phase Flaws：A Comparative Study
- Water Quality Data Analysis Based on Cluster Algorithm
- Research on Water Monitoring System of Coal Mine Based on Ontology
- LED Chip Electrode Positioning Based on Machine Vision
- Image Decomposition Based on a Modified Bidimensional Empirical Mode Decomposition Method
- Design of Intelligent Search Engine with Multiple Agents
- Quantum Safety Control System
- Design of an Internet of Things Intelligent Basket System
- Electronic Textbook: Concept, Functional Analysis and its Problem of Construction
- A Flexible and Scalable Approach of Application Deployment
- The Construction of Pay-for-Performance E-Commerce Trading Platform
- Based Stochastic Particle Swarm Optimization and Random Simulation for Solving Stochastic Dependent-Chance Programming
- A Hybrid Approach for Cases Classification of Medical Data
- Research on P2P Streaming Media Service System Based on Cross Domain
- Design of Identification System Based on BCI
- Tolerance Information Granules Used in EEG Classification
- Features Extraction Method of Motor Imagery EEG Based on Information Granules
- DCT-Based Digital Image Steganography
- Research on Teaching Reform and Practice of University Computer Foundation Course
- Recognition Analysis of Wood Flour Mesh Number Based on External Rectangle Fitting Algorithm
- Design of Secure Communication in SWSN
- Constructe a Hierarchical and Architecture of Cloud Computing Frameworks
- A New Network Selection Procedure Using Access Networks Consent
- A Schur-Type Factorization of Central Extended Matrix
- The Application of BCI Technology in Android RPG Game
- Research on Wireless Sensor Network Transmission System
- EEG Feature Extraction Based on Wavelet Decomposition
- The Improvement and Evaluation of an Analog Digital Television System’s Availability and Users Experience
- Searching Path for Delay Protection Services of Fiber Channel Based on Security and Risk Equalization
- Real-Time Bidding Based on MooTools without Refreshing Page
- Interactive Consultation Based on MooTools Long Polling Techniques
- Research on Workflow Management Model Based on Ontology in Data Center
- The Application and Analysis of Chroma Keying by Using Adobe Ultra Software
- Another Kind of Crack on .NET Programs
- An Application Development Based on Android Platform － The Design and Realization of the Mood Release System
- The Method of Calculate Exponential Function
- Automatically Extracting University Scholar Names Information and Classification
- Researches on Data Correctness and Completeness in Cloud Computing Based on Game Theory
- Automatic Target Segmentation and Tracking in Intelligent Video Surveillance
- Application of Flash in the Analysis of Making Webpages and Mechanical Motiones
- A Study on Constructing On-line Seminar Based on the Mind Map
- A Survey of Watermarking Algorithm Based on Edge Detection
- The Design and Implementation of Infrared Communication System
- Research on Delay-Tolerant Network and Increasing Probability of Opportunistic Communication
- Sparse Line-Optical Flow Field Computing Method Based on Lines Matching
- Design and Research on Data Warehouse of Insurance Industry
- The Research and Construction of National Grid ERP Knowledge Management System
- ITS Platform Research Based on Cloud Computing
- The Application Study on Choosing Course System Based on JBoss Cache of Distributed Cache Technology
- Based on the User's Network Management Software Research
- Face Recognition Based on Semiconductor Neurocomputer
- Network Topology Discovery Algorithm Based on MIB
- Research on China's Web Accessibility to the Visually Impaired
- UTSE: A Game Engine-Based Simulation Environemnt for Agent
- The Study of Intelligent Learning Website
- Research of AForge.NET in Motion Video Detection
- Study on Measuring Methods of Self-Physical Simulation to Radar Performance
- The Application of Dyadic Wavelets Transform Modulus Maximum in the Seismic Signal De-Noising
- Research of Computer Network Information Security and Protection Strategy
- Research on the Location of Parallel Line Labeling Based on Water System of Line Landmarks
- Assessment Model and Method Research of Information Security Risk
- Community Detection in Social Networks
- Discussion on Preprocessing Technique of Geophysical Logging Data
- Research on Medical Information Cross-Regional Integration Scheme
- Design and Implementation of Broadcasting and Television Program Monitoring System
- The Development of WEB Platform-Based on New Rural Social Endowment Insurance of Management Information System
- On the Application of Digital Video Watermarking Technology
- Rate Allocation Algorithm with Successive Refinement in Peer-to-Peer Networks
- Hardware Design of UHF RFID Reader for the Internet of Things
- Current Status and Development Trend of Research of Computer Forensic
- Infinitely many Solutions of Semi-Linear Elliptic Equation with a Logarithmic Nonlinear Term
- Operating Mechanism of Teaching Quality Information System
- Design of Polytechnic College Practice Training Base Management System Based on Internet of Things
- Using One-Dimensional Linear Interpolation Method to Check Over-Fitting in Neural Network with Multi-Dimensional Inputs
- Schur Factorization for Unitary Extended Matrix
- Image Tamper Blind Detection Based on CFA
- A New Automatic Seamless Image Stitching Algorithm Based on the Gray Value of Edges
- A Simplified Integration for Heterogeneous Database Application System
- Information Granule Reduction and Cluster Based Partial Least Squares Applied in EEG Signals
- Based on Data Mining Technology in Distance Education System Applied Research
- College Campus Network Management Information System Research and Implementation
- High-Speed Architectures for Parallel BCH Decoders
- The Research of Excel File Fragmentation Data Recovery
- Realization of Communication Control for Bill Acceptor Based on Java Technology
- Extension and Update for Meteorological Metadata
- On Ethernet Applications in the Field of Vehicle Network
- Research on Advanced Algorithm of Angle Bisector Line Landmarks Labeling
- A XML Information Integration Model Based on Ontology
- Experimental Study of FPCA on its Generalization Performance in Image Classification
- Decision on Function of One Simple Separable Relation for the Minimal Covering of P*K
- Optimization of SVM Method with RBF Kernel
- The Study of the Workflow Process Model in OA System
- Integrated Process Planning Method for 3D Designing Environment
- Research of Active Knowledge Aided System in the Bearing Design
- 3D CAD Model Retrieval Based on Oriented Bounding Box and Normals Distribution
- The Introduction to MooTools Architecture
- Loss-and-Noise Tolerant Single-Shot Quantum Coin Flipping
- Design of the Small World Model by NS2
- Research on Equipment Maintenance Support System Based on B/S Structure
- Study on Automatic Diagnosis of Remote Support for Equipment Fault
- Research on CHAID Algorithm Application in Mobile Population Management Field
- Construction and Enumeration of Steiner Triple Systems with Order V
- Research on the Architecture of Shaanxi IoT Industry Chain
- Methods of Constructing and Enumerating the Spanning Tree of a Connected Graph
- Chapter 5: Materials and Technologies in Construction
- Mechanical Performances of Aluminum Cellular Metal with Kelvin and Cubic Structure
- A Monitoring Method for Transmission Tower Vibration Based on Fiber Grating Sensor Technology
- A Resistance Model of Carbon Fiber Composite Materials Based on Interfacial Effect
- Cellular Concretes Based on Nanostructured Perlite Binder
- Unbonded Prestressed Concrete Design Characteristics and Construction Technology
- Green-Wall Materials in New Rural Construction Projects
- Test Research on Influence of Water and Mineral Composition on Physical and Mechanical Properties of Phyllite
- Experimental Study on Mechanical Properties of Synthetic Macro-Fiber Reinforced Reactive Powder Concrete
- Research of Waste Recycling Natural Fiber Materials at Green Roof
- Test Study on Interface Properties between Different Geogrids and Clay
- Application of Wood-Plastic Composites in Exhibition Design
- The Analysis of Prestressed Short FRP Confined Columns under the Action of Eccentric Load
- The Influences of Different Temperature Histories on the Assessment of Cracking Resistance Based on the Concrete Thermal Stress Test
- Electromagnetic Wave Absorption Properties of Cement Filled with Carbon Black
- Based on the Urban Waterfront Landscape Image of the Waterfront Place Design
- Study on the Rutting Test Using Cylinder Specimen with Flexible Constraint
- Welding Residual Stress Evaluation of Complex Welded Joints by Brinell Hardness Method
- Greenway Construction in Shunde District
- Theoretical Calculation of the Strength of the Mass Concrete
- Seismic Performance Research of Viscous Dampers under Different Arrangement
- Vibration Serviceability Assessment of a Residential Building
- Comparison of One-Way Shearing Test between Coarse-Grained Soils and Reinforced Earth
- Secondary Moment Distribution of Prestressed Concrete Slab
- Emergency Response and Control Technology for Landslides in Northern Fujian
- Compressive Strength Tests of Recycled Green Concrete Containing Ground Granulated Blast-Furnace Slag
- Stability Analysis of Surrounding Rocks and Initial Support Structure in Phyllite Tunnel Construction Process
- Investigation and Analysis of Seismic Safety of Farmhouses in the Tanlu Fault Zone
- Prestressed Concrete Beam Bridge Design and Main Parameters of Prestressed Steel Beam Calculations and Arrangement
- Research on the Application of Radial Basis Function Neural Network to Structural Reliability Analysis of Gravity Dam
- Analysis on Ground Vibration Induced by Subway under Three Track Structures
- Prestressed Concrete Continuous Beam Bridge Span Arrangement and Structure Size Proposed Analytical
- Analysis of Factors Affecting Stability of Tunnel
- The Practical Application of Building Information Modeling in the Construction Phase of the Building Life Cycle
- Application Study of Green Building Technology of Townlet under Rural-Urban Integration
- Experimental Research on Physical and Mechanical Properties of High-Speed Railway Subgrade Filler
- The Relationship between Taiwan Green Buildings, Humanity and Aesthetics
- The Importance of the Appearance Image and Cognition of Green Building
- The Types of the Components of the Stores' Facades in City Centre - By Comparison between Nanjing City (China) and Fukuoka City (Japan)
- Economic Comparison for the Protection Scheme of Ancient Building Based on BIM
- The Study on Digital Fabrication System in the Construction Process
- Technical Analysis of Optimal Design for Building Structure Considering Cost Constraint of Project
- The Field Office Survey for Lighting Environment in Taiwan
- All Steel Structure Portal Frame Light Building Structure Design
- Empirical Study on Highway Subgrade Construction Scheme Design
- Study on the Design of SMA Mixture on Expressway
- Chapter 6: Product Design and Engineering Management
- Study the Structured Approach to Improve Manufacturing Configuration before Design Readiness
- The Research on Rapid Design and Manufacture Method for Letters Product Based on RP Technology
- Application of Integrated Concept in Industries for Maximizing Energy Saving Potential
- Study on Design of Huxiang Smoked Bamboo Furniture
- Fengxiang Clay Sculpture in the Design of the Product of Contemporary Opportunity
- Key Technologies of Rapid Modeling for Additive Manufacturing
- Campus Souvenirs Design Research Based on Emotional Needs
- The New Model Research of Product Design Services Based on Cloud Computing
- Analysis of Apple’s Design Management Policy
- A Study on Introduced Visual Design Elements Applied to the Product Packaging Design
- Flow-Oriented Collaborative Process Planning System
- Intention Bionic Principle of Automotive Body Shape Design
- Virtual Prototype Modeling and Simulation of Remote Controlled Weapon Station
- Customized CAD System Design Based on GMDH Method for Racing Bikes
- Bus Body Design and Calculation of Aerodynamic Drag Coefficient
- Application Study of the Virtual Freeform in Product Development Design
- A Study of Application of Upholstered Furniture Design
- Analysis on Site Design of Road Landscaping in GuangDong
- Adaptable Design Methodology of Heavy Duty Machine Tool for Green Remanufacturing
- The Innovative Product Design of the Superhighway Speed Card
- A Study of the Innovative Design of Picture Book Creation Using Mixed Media
- The Effect of 3D Printing Technology on the Future Fashion Design and Manufacturing
- Spreading the Culture of a Sustainable Manufacturing of Eco-Fashion Products. Focus on International Brands that make the Synergy between Fashion Design and Sustainability their Success
- Research on Evaluation of Collaborative Development Organization for Complex Production System
- Based on the Multifunctional Treadmill Structure of Human Body Engineering Design
- Proposal of Eco Design for Chinese Manufacturing
- Exploring Industrial Design with the View of Ecological Nature
- Research on the Color of Anchor Handling Towing Supply Vessel
- Wind, Thermal and Hydropower Joint Operation Benefit Analyzes Based on the Life Cycle Management
- Based on Reliability Importance Measures Method of Comprehensive Evaluation of Electric Power Communication Equipment
- Connector Structure-Based Modeling of Assembly Sequence Planning
- Risk Assessment of Cascading Failures in Power System Based on Fuzzy Theory
- A Non-Probabilistic Model for Structural Reliability Analysis
- Research on Brittle Source of Airline Network
- Individual Design of Mechanical and Electrical Products Based on Reverse Engineering
- A Model of the Driving Fault Tolerance of Traffic Management and Control Facilities at Urban Intersections
- Consideration of Planning a Mobile Hybrid Operating Room
- The Impact of Initial Allocation of Carbon Emission Rights on Power Generation Replacement Analysis Model
- A Study on Semantic Design of Speakers
- Evaluation on Comprehensive Protective of Protective Engineering Based on Input-Output DEA Model of Two Goals
- A Model for Management of Large-Area Crop Rotation
- Risk Analysis of Marine Riser Based on Improved Fuzzy AHP Method
- Evolutionary Game Analysis of the Cooperation Motives of Mobile Operators and Financial Institutions in the Near Field Communication Mobile Payment Industry
- Application of the Fuzzy-AHP Method in Bridge Crane Safety Evaluation
- Shaanxi-Shehuo-Mashao-Mask-Based Office Supplies Design Studies
- A Study of the Design Aesthetics of Picture Book Creation Using Mixed Media
- A Design Science Study of Picture Book Creation with Mixed Media
- A System of Systems Approach to Supply Chain Design
- Data Acquisition and Quality Assurance Integration Platform Based on DPM
- Forecast on China's New Energy Vehicle Market Demand
- Study on Information Asymmetry and the Risks Initiated by it in the Supply Chain Finance
- A Study on the Future Development Trend of Virtual Clay Technology
- Application of BIM in Project Management
- Postal Universal Service Fund Collection Study from the Express Industry in the Information Age
- Power System Cascading Failure Risk Assessment Model Based on Graph Theory
- Enterprise's Brand and Products Shape-Designing DNA
- The Solution of an Integer Problem Based on Geometric Method
- A Research Review of Project Risk Assessment Methods
- Preliminary Hazard Analysis on Fire and Explosion Hazard of Stevedoring Process in LNG Terminal
- Analyzing and Constructing the Operation Mechanism of Industry Technology Alliance
- The Empirical Analysis of Small and Medium Sized Pharmaceutical Enterprises Operating Performance and Debt Source Structure
- Analysis of the Daily Management Classes Problems
- The Effective Management of Chinese Enterprise Procurement through Research
- Evolution of Innovation Cooperation Networks in the Marine Industry
- Research of the Office Chair Coding Technology Based on PDM
- Chapter 7: Urban Planning, Transportation and Environment
- The Study of the Relationship among Airline Network Profit, the Total Numbers of Node and Airline Passenger Flow
- Research on the Terminal Aircraft Separations Based on the History Surveillance Data
- Study on the Construction of Yichang River Cruise Homeport
- Landscape Ecology Design in Development Zone
- Optimizing Method of Express Delivery Network and Vehicle Routes Based on Automatic Parcel Machine
- Evaluating Public Perception for Environmental Attributes of the Zengcheng Greenway (Guangzhou)
- Research of Planting Different Species on Cooling Effectiveness
- Study on Community Residential Space with Block Unit Mixed Community Theory in Rapid Urbanization Region: Taking Xi'an Changning Newtown Community Planning as an Example
- The Investigation and Analysis of Environmental Geological Problems in Coal Mines in Yulin City
- Flow Comparison of the Traffic Model Based on Safe Driving
- Research on Flight Delay Based on Adaptive Agent Digraph
- Design and Simulation of Improved One-Dimensional Cellular Automaton Model
- Time-Space Research of the Two Safety Deceleration Models
- Inactivation of Bioaerosol in Indoor Air by DC Corona Discharge
- Risk-Based Approaches for the Remediation of a UST Site: A Case Study
- The Influence of Airline Network Passenger Flow, Fares on Airline Network Profit
- Urban Forms is Changing from Transport and Land Use
- A Method to Create the Traffic Accident Scene Graphic Based on Electronic Maps and Information Acquisition Device
- Computing Hybrid Rotation Period of Cotton-Rice and Cotton-Others
- Analysis of Urban Greening Maintenance and Management in the Shunde District
- Research on Apparent Viscosity Behavior of Municipal Sludge
- Research on Reliability of Urban Agglomeration Transport System after a Disaster
- National Highway Video Surveillance Networking Platform
- Study on Ecological Restoration of Abolished Strip Mine of Hulunbuir Grassland
- Species Composition and Succession Discipline on Lava Flow of Different Periods Volcano, Wudalianchi China
- An Area Growth Model of Eichhornia Crassipes with Application to Lake Ecosystem Restoration
- The Effects of Safety Deceleration Rule in Traffic System
- Effect of Diagenesis on the Formation Effective Reservoirs in Volcanic Rocks of Xujiaweizi Faulted-Sag
- Traffic Flow Turbulence Characteristics Research Based on the Cellular Automaton Model
- Crop Water Production Function of Processing Tomato (Solanum lycopersicum) under Regulated Deficit Irrigation
- Comparison of Different Means to Determine Postcrash Velocity in a Real-World Vehicle-Pedestrian Accident
Les mer
Produktdetaljer
ISBN
9783037859926
Publisert
2014-04-16
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
6300 gr
Høyde
240 mm
Bredde
170 mm
Dybde
165 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
3300