Experimental Mechanics and Effects of Intensive Loading
Heftet /
2015
/ Engelsk
Produktdetaljer
ISBN
9783038355199
Publisert
2015-09-06
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
830 gr
Høyde
240 mm
Bredde
170 mm
Dybde
18 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
368
Collection of selected, peer reviewed papers from the 2014 SEM Fall Conference and International Symposium on Intensive Loading and Its Effects, October 19-22, 2014, Beijing, China.
The 46 papers are grouped as follows:
Chapter 1: Plenary and Invited Talks;
Chapter 2: Mechanical Properties of Materials;
Chapter 3: Materials and Structures under Extreme Loading Conditions;
Chapter 4: Computational Experiments and Simulation;
Chapter 5: Advanced Diagnostic and Measurement Methods
Les mer
<p>Selected, peer reviewed papers from the 2014 SEM Fall Conference and International Symposium on Intensive Loading and Its Effects, October 19-22, 2014, Beijing, China</p>
- Preface and Committee
- Chapter 1: Plenary and Invited Talks
- Application of the Continuous Rotating Detonation to Gas Turbine
- Structural Response under Blast Loads - Simplified Numerical Analysis
- A Study on Very High Cycle Fatigue Properties of Low Flammability Magnesium Alloy in Rotating Bending and Axial Loading
- Some Possibilities of Hypercumulative Regime of Jet Formations
- Deformation and Failure of Pre-Notched Thin Metal Plates Subjected to Confined Blast Loading
- Chapter 2: Mechanical Properties of Materials
- Dynamic Deformation Response of G33 Steel under High Temperature
- The Correlation between Microstructure and Dynamic Mechanical Property of Heat Treated Β20C Titanium Alloy Based on Different Forging Processes
- Study on Preparation and Mechanical Properties of W-Cu Alloy with Low W-W Contiguity
- Effects of Silica Nanoparticle Addition on Dynamic Properties of Poly(lactic acid)
- Dynamic Behavior in Ti-5553 Alloy with β Phase under Compression Loading
- Sintering Mechanism of Ti-6Al-4V Prepared by SPS
- Microstructure and Physical Properties of Nanocrystalline Aluminum Consolidated by Spark Plasma Sintering
- Microstructure and Mechanical Properties of TiB-Ti/Ti-6Al-4V Composites Fabricated by Spark Plasma Sintering
- Effect of Sintering Temperature on Microstructure and Mechanical Properties of Nanocrystalline Aluminum 5083 Alloy
- Research on Compression Properties of Ni-Ti Shape Memory Alloys
- Effect of Isothermal Heat Treatment on Dynamic Properties of a High Strength Steel
- Plastic Flow Stress and Constitutive Model for H96 Brass Alloy
- The Effect of Heat Treatment on the Microstructures and Dynamic Mechanical Properties of Near-β Ti-5553 Alloy
- Study on the Evolution of Adiabatic Shear Band of a High Strength Steel
- Chapter 3: Materials and Structures under Extreme Loading Conditions
- The Ballistic Performance of Multi-Layer Kevlar Fabrics Impregnated with Shear Thickening Fluids
- Three-Sheet Spot Welds of 5052 Aluminum Alloy: Weld Growth and Failure Behavior
- Research of the Anti-Penetration Mechanism for Titanium Alloys Armor Based on 3D Optical Scanning Technology
- The Volume Strain Energy Density Factor Criterion for Sharp V-Notches under Mixed-Mode I and II
- Critical Dimensions of Tensile-Shear Specimen for Resistance Spot Welds
- Durability Experimental Method of RC Components Strengthened with FRP in Hot-Wet Environment
- The Experiment Study on Flash Spectrum Produced by Hypervelocity Impact
- The Tensile Properties of PVB at Intermediate Strain Rate Using the In Situ Hopkinson Bar
- The Dynamic Behavior of High Speed Train Using Magnetorheological Technology on the Curve Track
- Investigation of the Large Scale Borehole Soundless Cracking Experiment on the Concrete Members
- Experimental Study on the Constitutive Relation of SPHSC under Uniaxial Compression Loading
- Chapter 4: Computational Experiments and Simulation
- Experimental Study and Numerical Simulation of the Tensile Test for GH4169 Coated with YSZ Coating at High Temperature
- Validation of the Tabulated Johnson-Cook Model for a Dynamic Compression Simulation
- Analyzing Stress Wave Propagation in a Hollow Bar Loaded Three-Point Bend Fracture Test Using Numerical Methods
- Non-Intervisible Pose Estimation Based on Plannar Mirror
- Fabrication of Multi-Scale Grid Patterns as Deformation Carriers in Optical Methods
- Modified Quartet Structure Generation Set Reconstruction of Finite Element Model for Co-Continuous Ceramic Composites
- Numerical Simulation of Damage Effective of Explosion in Buildings
- Impulsive Control and Practical Generalized Synchronization of a Class of Uncertain Chaotic System with a Given Manifold
- Investigation of Mesh Dependency of Materials Fracture in the Finite Element Simulation of a Projectile Penetrating into a Target
- Chapter 5: Advanced Diagnostic and Measurement Methods
- The Button Head Bullet Effects on the Incident Pulse of Split Hopkinson Press Bar
- Simultaneous Measurement of In-Plane and Out-of-Plane Deformations Using Dual-Beam Spatial-Carrier Digital Speckle Pattern Interferometry
- ViBe with Adaptive Threshold Based on Energy Minimization
- Experimental Measurement of Residual Stress on Thermal Spray Coatings with Moire Interferometry and Hole-Drilling Method
- 3D Deformation and Strain Analysis in Uniaxial Compressive Coal Using Digital Volumetric Speckle Photography
- Interior 3D-Strain Mapping in Opaque Materials Using Digital Volumetric Speckle Photography and X-Ray Micro Computer Tomography
- Numerical Model Building and Optimization of Concrete Based on the CT Images and Digital Volumetric Speckle Photography
Les mer
Produktdetaljer
ISBN
9783038355199
Publisert
2015-09-06
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
830 gr
Høyde
240 mm
Bredde
170 mm
Dybde
18 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
368