/

Engineering Solutions for Manufacturing Processes

Jiang, Zheng Yi Liu Xianghua Jiao, Si Hai Se alle
Heftet / 2013 / Engelsk

Produktdetaljer

ISBN
9783037856482
Publisert
2013-03-27
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
4700 gr
Høyde
240 mm
Bredde
170 mm
Dybde
128 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
2558

Redaktør
Jiang, Zheng Yi
Liu Xianghua
Jiao, Si Hai
Han, Jing Tao

Engineering Solutions for Manufacturing Processes

Jiang, Zheng Yi Liu Xianghua Jiao, Si Hai Se alle
Heftet / 2013 / Engelsk
Jiang, Zheng Yi Liu Xianghua Jiao, Si Hai Se alle
Heftet / 2013 / Engelsk
Nettpris:
6.719,-
Levering 7-20 dager
Sjekk lagerstatus i butikk

Volume is indexed by Thomson Reuters CPCI-S (WoS).
The papers of this 3 volumes set on “Engineering Solutions for Manufacturing Processes” are grouped as follows:
Chapter 1: Parts of Machines and Mechanisms. Design, Analysis and Simulation;
Chapter 2: Sensors, Measurement and Detection;
Chapter 3: Data Acquisition and Data Processing, Computational Techniques;
Chapter 4: Mechatronics and Robotics;
Chapter 5: Advanced NC Techniques and Equipment;
Chapter 6: Control and Automation;
Chapter 7: Electronics/Microelectronics Technology;
Chapter 8: Advanced Decisions for Automatic Manufacturing;
Chapter 9: Information Processing Technologies;
Chapter 10: Technologies in Architecture and Construction;
Chapter 11: Technologies and Equipment in Medicine;
Chapter 12: Technologies in Food Industry and Agriculture;
Chapter 13: Products Design;
Chapter 14: Engineering Education;
Chapter 15: Economics, Marketing and Engineering Management.

Les mer

Selected papers from the 2012 International Conference on Advances in Materials and Manufacturing (ICAMMP 2012), December 22-23, 2012, Beihai, China

  • Preface and Conference Organization
  • Chapter 1: Parts of Machines and Mechanisms. Design, Analysis and Simulation
  • Effect of Computer Color Matching System in Laboratory
  • Research on Geometric Model for Solving the Displacement of Vane Pump
  • The Design of a New-Style Boat-Shore Goods Delivery Cableway System and Research on Synthesis Movement Performance
  • Integration Expression and Convergence Characteristic of Airfoils for Mixing Impeller
  • Fitting Method Research of Sieving Parameters of Vibration Screen and Sieving Efficiency Based on DEM
  • Performance Analysis of Bionic Airfoil on the Small Unmanned Plane
  • Research and Design of Small Displacement LPG Motorcycle Pressure Reducer
  • Study on Controllable Prestress of the Block in the FDSO Bottom with the Supports Adjustment
  • The Analysis of Power Performance for Small H-Vertical Axis Wind Turbine
  • Effect of Different Air Content on Cavitation with Ultrasonic Treatment
  • Structural Dynamic Analysis and Optimization of High-Speed Precision Machining Center Column
  • Reduction Design for Corrugated Box - Local Composite Strengthening Technology
  • A Carrying Platform of Spilled Oil Recovery System Used on Unmanned Surface Vehicle
  • Catastrophe Theory Applied in Structure by Vibration Gauge
  • SOC Estimation of Traction–Battery for Electric Vehicle Using Rebound Voltage
  • Research on Flow Divider of High Pressure Water-Jet Target Material Detection Device
  • Analyzing the Natural Frequency of Litchi Tree
  • Thermal Design, Analysis and Experimental Verification of Electronic Equipment of a Satellite Borne Microwave Radiometer
  • Direct and Indirect Strain Measurement of Flexible Printed Circuit Boards - fPCBs
  • A New Soot Emission Model for Diesel Methanol Dual Fuel Engine
  • Dynamic Modeling of Marine Diesel Propulsion System in All Kind of Running Conditions
  • Numerical Research about Drag-Reduction Characteristic of Riblet Structure on Aerofoil Blade of Centrifugal Fan
  • The Numerical Simulation of Methanol and N-Heptane Dual Fuel Combustion
  • Research on the Key Technology of Exploiting and Waterflooding in One Well with ESP
  • Design of the Power Unit in the Hydraulic Hybrid Vehicle
  • The Design and Numerical Study on Flow Characteristics of High Temperature and High Pressure Steam Trap
  • The Influence of the Capacity-Increasing in the Trailing-Edge Cutting of HL240 Turbine Blade
  • Research of the Atomization Characteristics of Low Pollution Air Blast Nozzle
  • The Research on Shaft Center Position of Ultra-Supercritical Steam-Turbine Generator
  • Flow Field Study and Structure Optimization of Pelton Tubine Bucket
  • Numerical Study of Pressure Loss in Ceramic Bed of Thermal Flow Reversal Reactor
  • Numerical Analysis of Water Flow Boiling Characteristics within Vertical Rectangular Thin Channels
  • Accurate Designing of Flat-Walled Multi-Layered Lining System Using Genetic Algorithm for Application in Anechoic Chambers
  • Influence of Material on Automotive Crash-Box Crashworthiness Subjected to Low Velocity Impact
  • Influences of Working Parameters on Performance of Elastic-Friction Seed-Metering Device
  • Simulation Study of the MOA Resistive Leakage Current Detection Method
  • Stress and Dynamic Characteristics Analysis of Multilayer Composite Flywheel
  • Physical Modeling Test on Gas Rotary Lance for Wire-Feeding
  • The Effect of Related Parameters on the Gear Deformation in Oil Quenching
  • Experimental Study on the Slagging Characteristics of Biomass Briquette Combustion Equipment
  • The Structural Design and Experimental Research of Multi-Level Cushioning Packaging Storage Box
  • Nozzle Spraying Model of Combustion Thermal Spray
  • Analysis of Deformation of Reflector for RF-Excited CO2 Laser
  • Study on Block Structure Optimization of Single Degree of Freedom Crankshaft Fillet Rolling Machine
  • Three-Dimensional Unsteady Simulation in a Water Turbine
  • Kinematics Simulation of Mechanical Arm of Hot Extruding and Upsetting Machine Based on ADAMS
  • Manufacturing Technology for a New Type of Profiled Rotor
  • Mechanism Motion Analysis and Hydraulic Buffer Equipment Design Based on COSMOSMotion
  • Three-Dimensional Modeling Design on Multifunctional Office Chair for Fitness on Solidworks
  • Buffer Analysis of Multifunction Office Chair Based on ADAMS and ANSYS
  • Dynamic Simulation of Automatic Feeding Punch Mechanism Based on ADAMS
  • Kneading Mixer Paddles Parameterized Modeling
  • Parametric Finite Element Analysis of the Shipyard Lifting Lug Based on VB and ANSYS Interface
  • The Design of Mechanical Arm of Hot Extruding and Upsetting Machine Based on SolidWorks
  • The Design on Automatic Feed Punching Mechanism on SolidWorks
  • Parametric Design of Friction Plate Based on VB and Pro/E
  • The Simulation of Rotary Motion of the Flexible Multi-Body Dynamics of Tower Crane
  • Thermal Characteristics Analysis of Aerostatic Direct Drive Rotary Stage
  • 350km/h EMUs Light Frame Model Reconstruction Technology
  • Study on Modeling Technology Based on Polygon Transform
  • Reverse Modeling Analysis and Design on Rubber Sealing Element in Spherical BOP
  • Thermal Characteristic Analysis on a High Precision Turning Center’s Headstock
  • Finite Element Analysis and Improvement of Spindle Box of Machining Center VM1806H
  • Optimization Design and CFD Study of Nature Gas Engine Inlet
  • Simulation Study the Movement of Materials in Loader Shovel Working Process Based on EDEM
  • The CFD Analysis of Exhaust Runner for GW15 Gasoline Engine
  • The Discrete Particle Simulation of Vibration Sieve Based on CUDA
  • Turbulence Numerical Simulation and Particle Track Analysis of Slurry Pump Impeller
  • Weight Reduction Design Methods of Wring Based on Load Spectrum
  • An Improved Reversible Watermarking Algorithm in Wavelet Domain for Two-Dimensional CAD Engineering Graphics
  • FEM-Based Lifting Permanent Magnetic Chuck Design
  • Structural Design for Oil Well Pump with Soft Sealing and Small Diameter Piston
  • Analysis of Mechanical Characteristics and Structural Optimization of the Impeller
  • Numerical Simulation of Single Metal Progressive Cavity Pump
  • Virtual Design and Structural Optimization of Hydraulic Support Based on Pro/E Software
  • Research on the Reliability and Optimum Design of Automotive Transmission
  • Structural Optimization Design for Lower Beam of Hydraulic Press with the Casting Process Requirement
  • Collaborative Optimization of Excavator Boom Mechanism Parameters under Multiple Loading Conditions
  • Modeling and Kinematics Simulation of Shearer’s Travelling Mechanism Based on Virtual Prototyping Technology
  • Dynamic Modeling and Analysis of Underactuated Prosthetic Hand
  • Simulation Research on Undercutting Properties of Involute Gears Based on VB
  • Analysis and Simulation for Balance of Rigid Rotors Based on ADAMS
  • Rigid-Flexible Hybrid MBD Based Modeling and Simulation Method for Coupler Mechanism
  • Stability Research on Configuration Transformation of the Complex-Surface Cutting Metamorphic Mechanism
  • The Virtual Prototype Modeling Research of a Wind Tunnel Test Platform with Member Flexibility
  • Research on Numerical Computing Platform of Centrifugal Fan Based on Parameterization
  • Based on ANSYS APDL Language Moving Blade Adjustable Axial Flow Fan Optimization Design
  • CFD Simulation on Flow Distribution in Plate-Fin Heat Exchangers
  • Numerical Prediction of Cavitation Erosion on a Francis Turbine Runner
  • Numerical Simulation of the Performance of Gas Turbine Combustor
  • Performance Study of Heat Exchangers with Continuous Helical Baffles on Different Inclination Angles
  • Research on Impeller Blade Style of Stamping and Welding Multistage Centrifugal Pump
  • The Numerical Simulation of the Flow Field in the Underground Hydrocyclone
  • Modeling and Simulation of Valve Port in Non-Circular Opening Spool Valve
  • Optimization on Mistuning Blades Arrangement of Vibration Absorption Based on Genetic Particle Swarm Algorithm in Aero-Engine
  • Optimized Design of Structure Parameter of New Fuel Injection System
  • Torque Pulsation Minimization of Permanent Magnet Synchronous Motor Using the Taguchi Method
  • Main Beam Optimization of Wind Turbine Blade Base on Multi-Objective Genetic Algorithm
  • The Optimization Design of Spindle Box for Large Friction Welder Based on the Sensitivity Analysis
  • Analysis on Mechanical Characteristics of Flexible Membranous Disc Coupling
  • Experimental Study on Durability and NVH of Rear Driving Axle of Minibus
  • High-Dimensional Harmonic Balance Analysis for a Turning Process with State-Dependent Delay
  • Model and Simulation for Two-Axis Vibration Isolator
  • Numerical Analysis for the Stability of Cylinder Gas Film Seal
  • Research on Configuration-Complete Dynamic Modeling of Metamorphic Mechanism Based on Screw Theory
  • Study on Dynamic Characteristic of Internal Parallel Moving Gears Transmission with Balance Structure
  • Analysis about the Influence of Load on Loss of the Ceramic Spindle
  • Constructing the Frequency-Energy Plot of Nonlinear Vibratory Systems via the Modified Lindstedt-Poincaré Method
  • Forced Vibration of Rotor Suppressed by a Automatic Ball Balancer (Nonlinear Principal Resonances)
  • Study on the Dynamic Characteristics of Automobile Tire
  • Vibro-Acoustics Characteristics of Non-Uniform Ring Stiffened Cylindrical Shells Using Wave Propagation Approach
  • Simulation Research of Six-Bar Slider-Crank Mechanism
  • Optimal Design of Modified Cylindrical Gear Based on Minimum Flash Temperature of Tooth Surfaces
  • Study on Numbers of Multi-Tooth Meshing Teeth Pairs for Involute Internal Gear Pairs with Small Tooth Number Difference
  • The Research of High Precision FA45-29 Prototype Design and Process
  • Study on Avoiding Undercutting of Stub Tooth Involute Gear with 22.5 Degree Pressure Angle
  • Matching Design and Simulation of Powertrain Parameters for Electric Vehicles
  • Raising Torque Calculation System Design for Single-Arm Pantograph
  • Influence of Assembly Tolerance on Dynamic Characteristics of Motor Rotation Assembly
  • Modeling and Simulation of the Marine Permanent Magnet Synchronous Propulsion Motor with Direct Torque Control System
  • Numerical Analysis of the Vibration of Pipes Conveying Fluid under the Influence of Vertical Branch
  • Analysis on Circumferential Clearance of Four-Ball-Pin Constant Velocity Joint
  • The Layout Optimization for Axial Stiffness of a Flexplate Disk with Weight and Inertial Moment Constraints
  • Study on Water-Lubricated Graphite Sliding Bearing Performance Test
  • Analysis of Traction Characteristics of Grease-Lubricated Sliding Bearing
  • Test and Analysis of Steel Cable Isolator for Medical Equipments in Field Vehicle
  • Design and Research on 1kgTNT Equivalent Explosion Vessel
  • Chapter 2: Sensors, Measurement and Detection
  • A Spatial Correlation Based Data Aggregation Algorithm for Wireless Sensor Networks
  • A Spatial-Temporal Correlation Based Novel Clustering Algorithm for Wireless Sensor Networks
  • A Type of Wireless Sensor Network Platform
  • Ethanol Sensor Based on Microring Resonator
  • Dried Jujubes Online Detection Based on Machine Vision
  • The Fiber Bragg Grating Sensor and its Interrogator for Dynamic Strain Measurement of Concrete
  • Heterogeneous Convergence Model of Intelligent Perception Network Using Fiber Optic Sensing
  • Simulating on a New Elastic Element of FBG Accelerometer
  • Implementation of Modified Conjugate Gradient Algorithm in Electromagnetic Tomography Lab System
  • Improvement and Realization of Miniature Flexible Gyro in the Photoelectric Platform
  • Multi-Channel ARMA Signal Covariance Intersection Fusion Kalman Smoother
  • RF Pulse Signal Study in the SAW Delay-Line Sensor
  • Signal Process of Gas Monitoring System in Fiber Sensor
  • Special Display Instrument for Fiber Current Transformer
  • A Straight-Line Trajectory Tomography Method with Algebraic Iteration Reconstruction
  • Application and Design of Auto-Test Instrument for the Airborne Thermometer System
  • Design of an Appearance Evaluation System for Porcelain Ware
  • Measuring Theory Research on the Automobile Steering Angle Automatic Measuring System
  • Study on Comparison Analysis and Error Analysis of Polarization Ratio Models
  • Design of Microcontroller System for Surface Scanning of Micro-Steel Ball
  • Development of Monitoring and Diagnosis System for Linear Motion Unit
  • Intelligentized Soft X-Ray Picosecond Framing Camera Control System Design
  • Research on Positioning System of Insulator String Flashover in High Voltage Transmission Line
  • Study of Rapid Calibration Method of Angel of Attack Sensor and Error Impact on Flight Control System
  • The Modular Design of the Hydraulic CAT System
  • The Research on Locating License Plate of Vehicle Based on Color Conversion and Projection
  • Design of Greenhouse Monitoring System Based on Zigbee
  • Design of Meteorological Monitoring System for High-Speed Railway
  • The Fault Diagnosis of Car Body Control System Based on the CAN Bus
  • Weigh-in-Motion to Estimate Vehicle Weight of Rigid Pavement Strain Signal
  • Methodology of Micro-Accelerometer Reliability
  • Elastic Wave Measurement Technology and its Engineering Application
  • Fault Diagnosis for Marine Engine System Based on Complex Network Cluster Method
  • Chapter 2: Sensors, Measurement and Detection
  • Research on Numerical Calculation Method to Aerodynamic Noise in High Velocity Environment
  • Air Dustfall Impact on Spectrum of Ficus Microcarpa’s Leaf
  • Experimental Investigation of Piezoelectric Bimorph Cantilever on Vibration Energy Harvesting Performance
  • Structural Design and Testing of a Butterfly Piezoelectric Generator with Multilayer Cantilever Beams
  • Nonequilibrium Charge Carrier Lifetime Testing Equipment for Semiconductor Materials by a Contactless Microwave Phase Method
  • Liquid Crystal Biosensors
  • The Application of Ant Colony Optimization in Wireless Sensor Network Routing
  • Nanostep Fabrication Using FIB Technology
  • Evaluating Method of Roundness Error Based on the Maximum Inscribed Circle and Minimum Circumscribed Circle
  • Femtosecond Pump-Probe Investigation of Ultrafast Phenomenon of GaAs
  • The Simulated Calculation of Self-Levitation Force with Different Magnets Core in Ferrofluid Sensor
  • Research on Length Measurement of Workpiece Based on Digital Image Processing Technique
  • Aircraft Wing Deflection Measurement Based on PLC Control System Design
  • Lightning Protection Measures Research on Coal Mine 6kV Distribution Lines
  • Hybrid TOA-TDOA Positioning Algorithm in AIS
  • Modified Short Baseline Acoustic Relative Localization System
  • Research on Geometric Dimensioning Automatic Detection of Tubular Member
  • A Motion Vehicle Detection Method Based on Self-Adaptive Background Subtraction with Cumulative Inter-Frame Difference
  • Centroid Localization Algorithm Based on Bicubic Interpolation Gray Square Weighted
  • An Advanced Verification Environment Based on VMM
  • Development of Frequency Difference Lock Based Brillouin Sensor
  • A Robust Spline Filter Algorithm Based on M-Estimate Theory
  • The Assessment of Line-to-Plane Perpendicularity Error Based on Particle Swarm Optimization
  • Fundamental Study on the NMR Magnetic Sensor in a Time Dependent Longitudinal Field
  • Study on Magnetic Susceptibility of NMR Probe in a Time Dependent Longitudinal Field
  • Chapter 3: Data Acquisition and Data Processing, Computational Techniques
  • An Improved Kernel Principal Component Analysis Based on Chaotic Artificial Fish School Algorithm
  • Asymmetric Separators and Asymmetric Separator Spaces
  • Bacterial Foraging Algorithm Based on PSO with Adaptive Inertia Weigh for Solving Nonlinear Equations Systems
  • Bacterial Foraging Algorithm Based on Quantum-Behaved Particle Swarm Optimization for Global Optimization
  • Robust Optimization Based on an Improved Genetic Algorithm
  • A Particle Pair Optimization Algorithm
  • A Kind of Classification Algorithms of Data Mining and Quantitative Analysis
  • Image Recognition Based on Chaotic-Particle Swarm-Optimization-Neural Network Algorithm
  • Denoising Power Quality Signal Using Savitzky-Golay Based on Virtual Instrument
  • Researches on Channel Mismatch Effects in Time-Interleaved ADC System
  • The Study of Smoothness and Similarity for Denoising Signal Based on Wavelet Transform
  • A Novel Method to Segment Keyboard Characters and Symbols Using Morphology
  • The Template Matching Research Based on Multiple Images Fusion
  • An Improving Algorithm Based on SOM Clustering and its Applications
  • Multi-Dimensional Global Approximation Method Based Improved MARS
  • Out-of-Core Incremental Algorithm for 2D Laguerre Diagram and Visualization Technique
  • Improved Simulation of Double Integrals Based on Monte-Carlo Method
  • Chapter 4: Mechatronics and Robotics
  • An Approach of Robotic Kinematics Parameters Calibration
  • Design and Dynamic Analysis of Mechanical Fingers Based on ProE
  • Design and Analysis of a Hip Rehabilitation Mechanism
  • Design and Analysis of a Mechanism of Ankle Rehabilitation Robot
  • Analysis and Improvement in Color-Based Target Recognition Algorithm of Robot
  • Fuzzy Adaptive Nonsingular Terminal Sliding Mode Control for a Three-Links Spatial Robot
  • Modeling, Design and Static Analysis of Seven Degree of Freedom Articulated Inspection Robot
  • Trajectory Optimization and Simulation of Aerospace Robotic Arm
  • Review of Research Progress in Biorobot
  • Gaze Estimation Based on Single Camera
  • Human Body Detection in Search and Rescue Operation Conducted by Unmanned Aerial Vehicles
  • Vibration Analysis of Tendon-Based Parallel Robot for Processing
  • Research on Workspace of Masticatory Bionic Robot Based on the 3/3-RRRS Parallel Manipulator
  • Design and Research of an Active Search and Rescue Robot Used in Ruin Interstice
  • Model Reduction of Rigid-Flexible Manipulators with Experimental Validation
  • Study on Weld Seam Tracking System Based on Laser Vision Sensing
  • Workspace Analysis and Performance Evaluation of a 6/6 Cable-Suspended Parallel Robot
  • Dynamic Character of a Novel Three-Axis Decoupled Compliant Mechanism
  • Effects of Microstructure Types on the Evaporation Efficiency of Electrically Heated Micro Evaporator
  • Research on the Gyrocompass Dummy Fault Diagnosis System
  • Research of the Brake Pedal Feel on Wire-by-Brake-System
  • Study on Computer Simulation for Car Handling Dynamics with 8 DOF
  • Application of CAN Bus in Modern Automobile Network System
  • Global and Local Path Planning on Robotic Wheelchair Based on Multi-Sensor Information Fusion
  • Torque Performance Measurement System for Spring in Seat Belt
  • Test and Model Identification System of Electromechanical Actuator
  • A Treadmill Speed Adaptive Control Method for Lower Limb Rehabilitation Robot
  • Fabrication and Performance of a Double-Chamber Serial Piezoelectric Micropump
  • Research of Sensorless Drive of Permanent Magnet Synchronous Motor Based on Power Factor Control
  • The Operating Principle and Experimental Verification of the Hydraulic Electromagnetic Energy-Regenerative Shock Absorber
  • Research of Electro-Hydraulic Proportional Variable Displacement Piston Pump Using Fuzzy Logic Control
  • Chapter 5: Advanced NC Techniques and Equipment
  • An Improvement and Simulation of NURBS Curve Algorithm
  • Finite Element Static Stiffness Analysis of the A/C Axes Bi-Rotary Milling Head
  • Study on NURBS Curve Interpolation Based on before Acceleration/Deceleration with Linear Jerk
  • Study on the Influence Factors of Honing Efficiency
  • The Reformation of Structure to the C5225 Double Column Vertical Lathe
  • Application and Study of CNC Network System Based on DNC
  • Comprehensive Evaluation on Reliability of Machine Tools Based on Extension Method to Determine Membership Degree
  • Parameter Optimization of Thermal Error of NC Machine Based on Matlab
  • Research on the Interpolation Processing Based on the Acceleration Control Information
  • The Application of the Improved Bootstrap Method in the Verification of Maintainability Indicators of CNC Machine Tools
  • The Research on Edged Detecting in CNC Engraving Technology Based on Reverse Engineering
  • How to Guarantee the Machining Accuracy of the Improved Numerical Control Machine
  • Research of NURBS Based Approach for Fitting Contour of Windshield
  • Automated Layer Aligning and Stacking System for the Fully Dense Freeform Fabrication Process
  • An Algorithm for Determining the Nested Relation between Contours of Complex Parts Applied in Laser Cutting
  • Method of Corner Smooth Transition Based on Interpolation Spline
  • Supporting Force Analysis of Oil Pads in Hydrostatic Rotary Table of Heavy Duty CNC Machine
  • Design of a Cutting Tools Information Integrated System
  • Modeling of Dynamic Errors for a Table-Tilting Type 5-Axis Machine Tools
  • The Macro Program Design and Digital Simulation of the Automatic Tool Changer for 5-Axis Machine
  • Research on Configuration Transformation of Cutting Machine for Complex-Surface for Metamorphic Mechanism
  • Optimum Design of Machine Tool Structures Based on BP Neural Network and Genetic Algorithm
  • The Bending Vibration Analysis on the Main Drive Axis of CNC Spiral Bevel Gear Milling Machine
  • Regularity and Convexity of NURBS Curves
  • Development of Post Processor for Five-Axis Machine of Non-Orthogonal Head Tilting Type
  • Chapter 6: Control and Automation
  • The Research on the Automatic System of Circulating Garage in Stereo Car Parking
  • System Design of Numerical Control Turret Press Based on Motion Controller
  • Tension Control Strategy in Plastic Film Printing Process
  • The Research and Application of the Karst Slope Irrigation Control System
  • Retractable Conveyor Control System Design Based on PLC
  • A Study on the Control of an Anchor Auto Drop System for Ship Windlass
  • Application of Speed Observer for XY-Stage of Wire Bonder
  • A Regulator Parameter Setting Simulation Research on Double Closed Loop Speed Control System
  • Output Feedback Stabilization of Uncertain Nonholonomic Chained Systems
  • The Development of the Closed-Loop Control System for the Mechanical Suspensions Test Rig
  • A Machine Vision-Based Heating Control Design for the Microwave Maintenance Vehicle
  • Applying Automatic Fare Collection System to Estimate a Transit Passenger Trip Origin-Destination Matrix
  • Modeling on Inverse Dynamic Process of Cut Tobacco Dryer
  • Research on Tourist City Traffic Signal Intelligent Control Method
  • A Study on μ Synthesis Robust Control for Independent Drive Electric Vehicle to Enhance Stability
  • Research on Assistance Control Algorithm for Electric Power Steering System Based on Robust Control Theory
  • Stability Control for Dual-Motor Independent Drive Electric Vehicle Based on Sliding Mode Control
  • Intelligent Optimization Consider Hour Traffic Flow Traffic Lights Working Condition
  • Research and Exploration of Intelligent Brightness Control
  • The Application of DCS in the Drum Water Level Control
  • Vegetable Intelligent Monitoring System Database Design Based on the Internet of Things
  • An Intelligent Wheelchair Control System Based on F28335
  • Designing of Belt Speed Detection System Based on PLC High-Speed Counter
  • Polyvinyl Chloride (PVC) Production Plant Control System Optimization
  • Study on Intelligent Monitoring for Cooling System of Power Transformer
  • A PLC-Based Fuzzy Control System for ESP
  • Advanced Flatness Control Strategies for Multivariable Optimisation Flatness Control System of Foil Rolling Mill
  • Application of Load Sensing Technology in New Type of Steel Arch Installing Machine
  • Thrust Hydraulic System of Casing Rotater with Flow Adaptive Control
  • Research on Advance Control of Chaotic Vibration Mill with High Vibration Intensity - Base on PLC Experimental Analysis
  • Simulation and Paramatric Analysis of ABS for EV with Electric Brake
  • Adaptive Fuzzy Sliding Mode Control of Asymmetrical Hydraulic Cylinder Based on DSP
  • Research on Hardware-in-the-Loop Simulation System for Terminally Guided Projectile Guidance and Control System
  • Sliding Mode Control in Finite Time Stabilization for Synchronization of Chaotic Systems
  • The Synchronization of a Fractional-Order Chaotic System
  • Optimization Control of Ice Storage Air-Conditioning System
  • Predictive Control of Switching System for DC/AC Converter
  • Realization of Maximal Wind Energy Tracking Control Subsystem Based on RTDS
  • Based on the Application of Self-Learning Fuzzy PID Control in Tension Control System
  • A Direct Torque Controlled Permanent Magnet Synchronous Motor Drive with Variable Parameters Speed Regulator
  • Research and Development of Microcomputer Control Pneumatic Technology Comprehensive Experiment Equipment
  • Research and Optimization for Transverse Thickness Difference Control Strategy of UCMW Cold Tandem Mill
  • Research on Broken Edge Wave Control Strategy Caused by Edge Drop Control in UCMW Cold Tandem Rolling
  • The Research on Automatic System for Drawing Water from Source Based on Configuration Software
  • The Research on the Control System for Gas Spreading Ignition
  • Research on the Application of Dahlin Algorithm on Position Tracking System
  • Sevorel Conclusions of Guaranteed Cost for Uncertain Discrete Singular System
  • Chapter 7: Electronics/Microelectronics Technology
  • The Application of New Reagent in the Copper Wiring CMP
  • A Ku-Band Low Noise Amplifier Based on Transformer
  • A Reconfigurable Compact Coupled Line Multiple-Band Bandpass Filter
  • Design and Analysis of Dual-Mode Double-Square Loop Resonator for Bandpass Filter Applications
  • Control Strategy for Fault-Tolerant Paralleling Active Power Filter
  • Research of Single-Phase Two-Stage Photovoltaic Grid-Connected Inverter
  • Investigation of the Temperature Character of IGBT Failure Mode Based the 3-D Thermal-Electro Coupling FEM
  • Arbitrary Waveform Generator Based on GaAs FET and Tapered Micro-Strip Line
  • A Small PV Temperature Control System
  • Stability Problem Research of Infrared Camera Critical Point Image
  • Research on SVPWM Algorithm for Three-Level Based on Active Area Vector Method
  • The Design of 12-Channels Acquisition and Storage System Based on FPGA and AD7492
  • A Dual-Loop-Based Parallel Power Supply System
  • Dual-Band BPF Using Simple SIR Structure
  • Using FEA Simulation and Experimental Models of Flexible Substrates to Assist the Technology of Miniaturization of Electronic Devices
  • Chapter 8: Advanced Decisions for Automatic Manufacturing
  • Bottleneck Mitigation of Assembly Lines with Memetic Algorithms
  • A Hybrid Population-Based Incremental Learning Algorithm for M-Machine Reentrant Permutation Flow-Shop Scheduling
  • Cooperation Efficiency Analysis for Bargaining Based Assembly Scheduling
  • Production Planning Optimization in F Company: A Scheduling Theory Case Study
  • The Resource Conflicts Detecting Method of Virtual Manufacturing Cell Based on Bayesian Network
  • Three Dimensional Assembly Tolerance Analysis of Gear Drivetrain
  • Reach on the Application of Digital Factory Technology in Process Planning and Line Teaching Field of Automobile Manufacture
  • Reach on the Buffer Capacity Design between Body Shop Lines of Aar with Simulation Analysis
  • Research on Open Shop Scheduling Based on Genetic Algorithm
  • A Modified Genetic Algorithm for Sequencing Problem in Mixed Model Assembly Lines
  • Computer-Aided Production Control of Automobile Injection Molds Based on Process Perception
  • Research and Application of the Visual Assembly System Based on the Process Lightweight Model
  • Cubic Polynomial Trajectory Planning Algorithm Based on Ideal Drive Force for Aircraft Fusagle Automatic Position and Pose Adjustment
  • An Automatic Product Assembly Method Based on Assembly Feature Pair
  • Analysis and Construction of Automobile Steering Gear Model Library Based on CATIA
  • Research on the Key Technology of Realizing Roll Rapid Drawing System
  • An Expert System for Aided Design of Rice Transplanter Chassis Systems
  • Prediction of Cutting Tool Life Based on ACO-BP Meural Network
  • Bayesian Network Based Expert System for Seismic Performance Assessment
  • Fault Reasoning and Diagnosis Technology Based on ACO & CBR
  • Research on the Expert System for Sweet Corn Standard Production Based on Heterologous Data Integration Technology
  • Research on the Ontology Knowledge Base Yunnan of Seed Plants Endemic Genera
  • The Research and Structure of the Dynamic Workflow Engine
  • Chapter 9: Information Processing Technologies
  • The Application of Oversampled Chebyshev Chaotic Sequences in Voice Communication Encryption
  • Using Semantic Constraints for Question Answering
  • Data Transmission Mechanism Supporting Fairness and QoS in Wireless Sensor Networks
  • Membrane Computing Model Design with Quantum-Inspired Evolutionary Algorithms
  • A Trust Model Award Content Security and Rating Supervision Model
  • Safety Information Dissemination Path Prediction in High-Density Vehicular Wireless Networks
  • Analysis and Research of BPF Filter Based on Libpcap
  • Application of Improved B+-Trees Algorithm in Embedded Database
  • Automated Safety Integration Analysis of Complex System Based on Functional Model
  • Search on Method of Netwok Intrusion Detection Based on Support Vector Machine with Pre-Extracting Support Vector
  • A Novel Communication Model Based on SOAP and SCORM in E-Learning
  • A Novel Method for Mining the Advisor-Student Relationships in Academic Social Network
  • A Query Optimization Modle and Algorithms for XML Data File
  • Novel Long-Term Information Based Language Identification
  • Survey on the Web Services Security Specifications
  • Research on Database for Aluminum Alloys
  • Research on Search Engine Marketing for Small and Medium-Sized Material Enterprises
  • Research of Cloud Computing in Management Information System
  • The Standardization of Folksonomy Based on Ontology Technology
  • Model of the Enterprise Value Management System
  • Qnew-Video Course Consultative System
  • Chapter 10: Technologies in Architecture and Construction
  • Frequency Response Calculation of Multi-Span Simply Supported Bridge
  • Chinese Traditional Elements in Contemporary Landscape Architecture of the Symbolization Research
  • Cold Trapezoidal Channel Composite Lining Structure Force Analysis and Failure Criteria
  • Performance of Multi-Layer Soil Electric Resistivity Model Comparing with Two-Layer Characterizations in Geotechnical Investigations
  • Influence of Damage of Suspenders on Static Performances of Steel-Box Stacked Arch Bridge
  • Intact Loess Structural Loss Parameter in Humidification Process
  • The Field Test of Solar House of Building with Altitude of 5000m in Tibet
  • A Numerical Study on Response of Foam Sandwich Beams with Corrugated Skins Subjected to Large Deflection
  • The Error Analysis of GPS-RTK Construction Stakeout
  • Solution of Slope of a Frame Based on Simple Support Beam Coming from Method of Changing to Rigidity by Step Combined with Conversion Method
  • Simulation Calculation and Construction Control of Xiaolan Channel Super Large Bridge
  • Phase Change Materials Packed Module Using in Floor Heating
  • Building Modification of Container Type Multi-Functional Space Based on Low Carbon Materials
  • The Application of Pressure Grouting Technology in Foundation Treatment of Clarifiers
  • Distinction and Relationship between Plant Protection and Engineering Support for Expressway Slope
  • Chapter 11: Technologies and Equipment in Medicine
  • Determination of Bacillus Calmette-Guerin Concentration Integrated in Delivery Materials for Intravesical Infusion Therapy of Superficial Bladder Cancer
  • Effect of Probiotics on the Growth Performance and Muscle Composition of Crucian Carp
  • Study on Nano- and Microcrystallites in Urines of Uric Acid Stone Patients
  • Study of Molecular Docking of Mu Opioid Receptor Agonist - Fentanyl and its Analogs Based on Docking
  • Boundary Element Numerical Method for Electric Field Intensity Generated by Oblique Twelve - Needle Electrodes in Biological Tissue
  • The Research of Laryngeal Reconstruction with Personalized Artificial Larynx Using Tissue Engineering
  • Chemical Constituents and Cytotoxic Activity of Gentiana farreri Balf.f.
  • Algorithm of Dynamical Pulse Rate Based on Comparison of Slope Summation
  • Enhancement Algorithm Combining Pseudocolor Processing and Marker-Based Watershed Transform for Medical Image
  • The Design of Drug Circulation Quality and Safety Control System Based on the Internet of Things
  • Service Life Study of the Artificial Knee-Joints of Crossed Pairing
  • Chapter 12: Technologies in Food Industry and Agriculture
  • The Application of PVA Antibacterial Film with Clove Oil/β-Cyclodextrin Inclusion Complex in Fruit Packaging
  • Extraction of Fish Oil from the Muscle of Sturgeon Using Supercritical Fluids
  • Optimization of Co-Culture Condition for Lactobacillus delbrueckii subsp. bulgaricus with Weak Post-Acidification Ability and Streptococcus thermophilus
  • Response Surface Methodology for Optimization of the Ultrasonic Extraction of Polysaccharides from Melaleuca ahemifolia
  • Effect of the Addition of Stearic Acid on Starch Properties
  • Study on the Control Technology Device of Alternating Magnetic Field Inducing the Plants to Breed
  • The Relationship Model of Light Interception and Plant Cultivation Form
  • Research on Mass of Leaves Estimation
  • Chapter 13: Products Design
  • Design and Applications of Solar Powered Textiles
  • A Multi-Agent System for Remanufacturing of End-of-Life Products
  • A Study into Green Package Design Practice
  • Cable Arrangement in Aircraft
  • Design and Applications of LED in Chinese Knots
  • Design Process and Printability of Cigarette Packaging Materials
  • Research of FFE in TRIZ Theory
  • Study on Architecture of Missile Design Service Platform Based on Virtual Design Unit
  • Modern Design: Industrial Technology, Engineering and Culture
  • Analysis the “New Concept” of Modern Product Design
  • Configurable Product Structure Model Based on Semantic Network
  • Design of Workflow Subsystem in Drawing Management System
  • Closed-Form Optimal Tolerance for Minimum Manufacturing Cost and Quality Loss Cost
  • Study on Influence of Back Angle on Human Body Pressure Distribution
  • An Analysis of the Influence of Visual Perception Characteristics to the Usability Design of Infants Aapplication Interface
  • Study on the Needs of Religious Mobile Application Software for the University Christian Student Group
  • Research on the Application of Advanced Surface Based on AliasStudio
  • Analysis of Mechanical Characteristics and Optimum Structural Design of Gear
  • Chapter 14: Engineering Education
  • Research and Implementation of Remote Virtual Teaching Platform on VRML-Java
  • Curriculum Reform Practice Based on PBL Teaching Mode
  • Engineering Concepts Guiding Engineering Curriculum and Management Mechanism for Engineering Majors Newly Established
  • Establishment of Multi-Disciplinary Training Project System for Engineering and Cultivation of Engineering Quality
  • Exploration in the Curriculum and Teaching Based Cultivation of Innovation Capabilities for Graduate Students
  • Platform Construction: A New Model for the University-Enterprise Cooperation
  • Research and Practice of Open Experiment on PHYWE
  • Research of a New Teaching Model and its Application in Industrial Engineering Discipline
  • Study on Problems and Countermeasures in Practice Teaching of Undergraduates in Mechanical Industrial Design Major
  • Analysis of Turning Process Relative to Machining Technician's Skills
  • Engineering Quality Cultivation for Professional Degree Graduate
  • Research and Application on Engineering Cases Based Three Stages Teaching Methodology
  • The Scientific Picture of the World as a Basis of Nanoelectronic Engineer’s Professional Competence
  • Application of Learning Project Instruction Method in Biochemistry Teaching for Municipal Engineering Graduate
  • CAD Compositive Capability Cultivation of College Students in Engineering Practice
  • Research on Establishment of Practical Teaching Platform for Welding Specialty
  • Research on Talent Training Mode Reform of Material Forming and Control Engineering Major
  • The Application and Development of Teaching Technology of Petroleum Engineering Specialized Foreign Language
  • A Brief Talk on the Use of “Task-Oriented” Teaching in Military Academies
  • The Study of Engineering Geology Teaching Based on the Creativity Thinking Training
  • Explore the Sustainable Value of Bamboo during the Teaching of Materials and Technology of Product Design
  • Discuss about Fast Response Performance of under-Damped Second-Order System in Time Domain
  • Chapter 15: Economics, Marketing and Engineering Management
  • Study on the Life Cycle Security Risks Management of Large-Scale Public Buildings
  • Discussion of the Key Factors in Oil Spill Risk Prevention in Offshore Oilfield Development
  • Rebar Futures Basis Characteristics and Analysis of its Effect on Hedging
  • Competency Models Utilization in Industrial Enterprises
  • Process Analysis of Construction Quality Management System for Water Project Based on Dissipative Structure Theory
  • Research on Competition Strategy Choice of Real-State Quality Based on Hierarchy-Fuzzy Decision Method
  • The Contribution Analysis of Science and Technology Service Industry of Liaoning to Manufacturing Industry - Based on Clustering Analysis on Direct Consumption Coefficient
  • Freeway Environmental Risk Assessment and Countermeasures
  • Effectiveness of ISO 14000 Environmental Management Systems in Malaysian Manufacturing Industries
  • Review on Foreign Study of Corporate Bond Spread
  • Investigation on Evaluation of Terminal Departure Capacity Based on Route Intersection
  • Repair Purchase Intention in Product Harm Crisis
  • Safety Rules and its Technical Implementation of Campus Network
  • The Two-Step Pricing Strategy Research of Regional Logistics Information Platform Based on Game Theory
  • The Impact Factors Analysis of the Continuous Safety of the Yangtze River Shipping
  • Manufacturing Industries Transfer Trend in China 1999 - 2010
  • The Application of Structural Adhesives in the Bridge Reinforcement
  • Relative Structure on Main Influence Factors of International Trade of New Energy Materials
  • A Process Innovation Knowledge Management Framework and its Application
  • Principal Factor Analysis for Main Raw Materials’ Transformation Efficiency in Iron-Making Systems
  • Research on the Bogie Maintenance for the Safely Running of Passenger Car
  • Study on Remanufacture Based on Customer’s Environment Preference
  • A Hybrid PSO Algorithm for Vehicle Routing Problem with Simultaneous Delivery and Pickup
  • Research of Asymmetric Quality Loss Function with Triangular Distribution
  • Case Study on FMECA and Risk Assessment for the Door System in High Speed Train
  • Developing Equipment Manufacturing Industry Based on Service-Oriented Manufacturing
  • Research on Models of Technology Innovation Systemic Risk and Early Warning of Materials and Manufacturing in SMEs
  • Equilibrium Strategies of Contract Choice Game between Supply Chains with Uncertain Demand
  • One-Piece Flow Implementation Research in the Garment Enterprises
  • Regional Logistics Information Platform User Growth Research Based on System Dynamics
  • Large-Scale Mechanical and Electrical Equipment Installation Project Management Research
  • Application of Lean Production in Company K
  • Assembly Process Improvement in Company S: A Lean Six Sigma Case Study
  • Key Technologies for Development of Track Utilization Decision Support System in Railway Passenger Stations
  • The Second Methode to Explore the Boat Schedule of Big Long River
  • Layout Optimization Base on Election Campaign Algorithm
  • Army Unit Warfare Simulation Experiment by Using Agent Technology
  • Fast Tabu Search Algorithm for Solving Multi-Vehicle and Multi-Cargo Loading Problem
  • Medium Voltage Distribution Network Planning of City Based on Reliability
  • The Mathematical Discription and Model Study of System Reliability
  • Reliability Evaluation of Ship Driver Based on Failure Mode Effects and Criticality Analysis
Les mer

Relaterte produkter

Volume is indexed by Thomson Reuters CPCI-S (WoS).
The papers of this 3 volumes set on “Engineering Solutions for Manufacturing Processes” are grouped as follows:
Chapter 1: Parts of Machines and Mechanisms. Design, Analysis and Simulation;
Chapter 2: Sensors, Measurement and Detection;
Chapter 3: Data Acquisition and Data Processing, Computational Techniques;
Chapter 4: Mechatronics and Robotics;
Chapter 5: Advanced NC Techniques and Equipment;
Chapter 6: Control and Automation;
Chapter 7: Electronics/Microelectronics Technology;
Chapter 8: Advanced Decisions for Automatic Manufacturing;
Chapter 9: Information Processing Technologies;
Chapter 10: Technologies in Architecture and Construction;
Chapter 11: Technologies and Equipment in Medicine;
Chapter 12: Technologies in Food Industry and Agriculture;
Chapter 13: Products Design;
Chapter 14: Engineering Education;
Chapter 15: Economics, Marketing and Engineering Management.

Les mer

Selected papers from the 2012 International Conference on Advances in Materials and Manufacturing (ICAMMP 2012), December 22-23, 2012, Beihai, China

  • Preface and Conference Organization
  • Chapter 1: Parts of Machines and Mechanisms. Design, Analysis and Simulation
  • Effect of Computer Color Matching System in Laboratory
  • Research on Geometric Model for Solving the Displacement of Vane Pump
  • The Design of a New-Style Boat-Shore Goods Delivery Cableway System and Research on Synthesis Movement Performance
  • Integration Expression and Convergence Characteristic of Airfoils for Mixing Impeller
  • Fitting Method Research of Sieving Parameters of Vibration Screen and Sieving Efficiency Based on DEM
  • Performance Analysis of Bionic Airfoil on the Small Unmanned Plane
  • Research and Design of Small Displacement LPG Motorcycle Pressure Reducer
  • Study on Controllable Prestress of the Block in the FDSO Bottom with the Supports Adjustment
  • The Analysis of Power Performance for Small H-Vertical Axis Wind Turbine
  • Effect of Different Air Content on Cavitation with Ultrasonic Treatment
  • Structural Dynamic Analysis and Optimization of High-Speed Precision Machining Center Column
  • Reduction Design for Corrugated Box - Local Composite Strengthening Technology
  • A Carrying Platform of Spilled Oil Recovery System Used on Unmanned Surface Vehicle
  • Catastrophe Theory Applied in Structure by Vibration Gauge
  • SOC Estimation of Traction–Battery for Electric Vehicle Using Rebound Voltage
  • Research on Flow Divider of High Pressure Water-Jet Target Material Detection Device
  • Analyzing the Natural Frequency of Litchi Tree
  • Thermal Design, Analysis and Experimental Verification of Electronic Equipment of a Satellite Borne Microwave Radiometer
  • Direct and Indirect Strain Measurement of Flexible Printed Circuit Boards - fPCBs
  • A New Soot Emission Model for Diesel Methanol Dual Fuel Engine
  • Dynamic Modeling of Marine Diesel Propulsion System in All Kind of Running Conditions
  • Numerical Research about Drag-Reduction Characteristic of Riblet Structure on Aerofoil Blade of Centrifugal Fan
  • The Numerical Simulation of Methanol and N-Heptane Dual Fuel Combustion
  • Research on the Key Technology of Exploiting and Waterflooding in One Well with ESP
  • Design of the Power Unit in the Hydraulic Hybrid Vehicle
  • The Design and Numerical Study on Flow Characteristics of High Temperature and High Pressure Steam Trap
  • The Influence of the Capacity-Increasing in the Trailing-Edge Cutting of HL240 Turbine Blade
  • Research of the Atomization Characteristics of Low Pollution Air Blast Nozzle
  • The Research on Shaft Center Position of Ultra-Supercritical Steam-Turbine Generator
  • Flow Field Study and Structure Optimization of Pelton Tubine Bucket
  • Numerical Study of Pressure Loss in Ceramic Bed of Thermal Flow Reversal Reactor
  • Numerical Analysis of Water Flow Boiling Characteristics within Vertical Rectangular Thin Channels
  • Accurate Designing of Flat-Walled Multi-Layered Lining System Using Genetic Algorithm for Application in Anechoic Chambers
  • Influence of Material on Automotive Crash-Box Crashworthiness Subjected to Low Velocity Impact
  • Influences of Working Parameters on Performance of Elastic-Friction Seed-Metering Device
  • Simulation Study of the MOA Resistive Leakage Current Detection Method
  • Stress and Dynamic Characteristics Analysis of Multilayer Composite Flywheel
  • Physical Modeling Test on Gas Rotary Lance for Wire-Feeding
  • The Effect of Related Parameters on the Gear Deformation in Oil Quenching
  • Experimental Study on the Slagging Characteristics of Biomass Briquette Combustion Equipment
  • The Structural Design and Experimental Research of Multi-Level Cushioning Packaging Storage Box
  • Nozzle Spraying Model of Combustion Thermal Spray
  • Analysis of Deformation of Reflector for RF-Excited CO2 Laser
  • Study on Block Structure Optimization of Single Degree of Freedom Crankshaft Fillet Rolling Machine
  • Three-Dimensional Unsteady Simulation in a Water Turbine
  • Kinematics Simulation of Mechanical Arm of Hot Extruding and Upsetting Machine Based on ADAMS
  • Manufacturing Technology for a New Type of Profiled Rotor
  • Mechanism Motion Analysis and Hydraulic Buffer Equipment Design Based on COSMOSMotion
  • Three-Dimensional Modeling Design on Multifunctional Office Chair for Fitness on Solidworks
  • Buffer Analysis of Multifunction Office Chair Based on ADAMS and ANSYS
  • Dynamic Simulation of Automatic Feeding Punch Mechanism Based on ADAMS
  • Kneading Mixer Paddles Parameterized Modeling
  • Parametric Finite Element Analysis of the Shipyard Lifting Lug Based on VB and ANSYS Interface
  • The Design of Mechanical Arm of Hot Extruding and Upsetting Machine Based on SolidWorks
  • The Design on Automatic Feed Punching Mechanism on SolidWorks
  • Parametric Design of Friction Plate Based on VB and Pro/E
  • The Simulation of Rotary Motion of the Flexible Multi-Body Dynamics of Tower Crane
  • Thermal Characteristics Analysis of Aerostatic Direct Drive Rotary Stage
  • 350km/h EMUs Light Frame Model Reconstruction Technology
  • Study on Modeling Technology Based on Polygon Transform
  • Reverse Modeling Analysis and Design on Rubber Sealing Element in Spherical BOP
  • Thermal Characteristic Analysis on a High Precision Turning Center’s Headstock
  • Finite Element Analysis and Improvement of Spindle Box of Machining Center VM1806H
  • Optimization Design and CFD Study of Nature Gas Engine Inlet
  • Simulation Study the Movement of Materials in Loader Shovel Working Process Based on EDEM
  • The CFD Analysis of Exhaust Runner for GW15 Gasoline Engine
  • The Discrete Particle Simulation of Vibration Sieve Based on CUDA
  • Turbulence Numerical Simulation and Particle Track Analysis of Slurry Pump Impeller
  • Weight Reduction Design Methods of Wring Based on Load Spectrum
  • An Improved Reversible Watermarking Algorithm in Wavelet Domain for Two-Dimensional CAD Engineering Graphics
  • FEM-Based Lifting Permanent Magnetic Chuck Design
  • Structural Design for Oil Well Pump with Soft Sealing and Small Diameter Piston
  • Analysis of Mechanical Characteristics and Structural Optimization of the Impeller
  • Numerical Simulation of Single Metal Progressive Cavity Pump
  • Virtual Design and Structural Optimization of Hydraulic Support Based on Pro/E Software
  • Research on the Reliability and Optimum Design of Automotive Transmission
  • Structural Optimization Design for Lower Beam of Hydraulic Press with the Casting Process Requirement
  • Collaborative Optimization of Excavator Boom Mechanism Parameters under Multiple Loading Conditions
  • Modeling and Kinematics Simulation of Shearer’s Travelling Mechanism Based on Virtual Prototyping Technology
  • Dynamic Modeling and Analysis of Underactuated Prosthetic Hand
  • Simulation Research on Undercutting Properties of Involute Gears Based on VB
  • Analysis and Simulation for Balance of Rigid Rotors Based on ADAMS
  • Rigid-Flexible Hybrid MBD Based Modeling and Simulation Method for Coupler Mechanism
  • Stability Research on Configuration Transformation of the Complex-Surface Cutting Metamorphic Mechanism
  • The Virtual Prototype Modeling Research of a Wind Tunnel Test Platform with Member Flexibility
  • Research on Numerical Computing Platform of Centrifugal Fan Based on Parameterization
  • Based on ANSYS APDL Language Moving Blade Adjustable Axial Flow Fan Optimization Design
  • CFD Simulation on Flow Distribution in Plate-Fin Heat Exchangers
  • Numerical Prediction of Cavitation Erosion on a Francis Turbine Runner
  • Numerical Simulation of the Performance of Gas Turbine Combustor
  • Performance Study of Heat Exchangers with Continuous Helical Baffles on Different Inclination Angles
  • Research on Impeller Blade Style of Stamping and Welding Multistage Centrifugal Pump
  • The Numerical Simulation of the Flow Field in the Underground Hydrocyclone
  • Modeling and Simulation of Valve Port in Non-Circular Opening Spool Valve
  • Optimization on Mistuning Blades Arrangement of Vibration Absorption Based on Genetic Particle Swarm Algorithm in Aero-Engine
  • Optimized Design of Structure Parameter of New Fuel Injection System
  • Torque Pulsation Minimization of Permanent Magnet Synchronous Motor Using the Taguchi Method
  • Main Beam Optimization of Wind Turbine Blade Base on Multi-Objective Genetic Algorithm
  • The Optimization Design of Spindle Box for Large Friction Welder Based on the Sensitivity Analysis
  • Analysis on Mechanical Characteristics of Flexible Membranous Disc Coupling
  • Experimental Study on Durability and NVH of Rear Driving Axle of Minibus
  • High-Dimensional Harmonic Balance Analysis for a Turning Process with State-Dependent Delay
  • Model and Simulation for Two-Axis Vibration Isolator
  • Numerical Analysis for the Stability of Cylinder Gas Film Seal
  • Research on Configuration-Complete Dynamic Modeling of Metamorphic Mechanism Based on Screw Theory
  • Study on Dynamic Characteristic of Internal Parallel Moving Gears Transmission with Balance Structure
  • Analysis about the Influence of Load on Loss of the Ceramic Spindle
  • Constructing the Frequency-Energy Plot of Nonlinear Vibratory Systems via the Modified Lindstedt-Poincaré Method
  • Forced Vibration of Rotor Suppressed by a Automatic Ball Balancer (Nonlinear Principal Resonances)
  • Study on the Dynamic Characteristics of Automobile Tire
  • Vibro-Acoustics Characteristics of Non-Uniform Ring Stiffened Cylindrical Shells Using Wave Propagation Approach
  • Simulation Research of Six-Bar Slider-Crank Mechanism
  • Optimal Design of Modified Cylindrical Gear Based on Minimum Flash Temperature of Tooth Surfaces
  • Study on Numbers of Multi-Tooth Meshing Teeth Pairs for Involute Internal Gear Pairs with Small Tooth Number Difference
  • The Research of High Precision FA45-29 Prototype Design and Process
  • Study on Avoiding Undercutting of Stub Tooth Involute Gear with 22.5 Degree Pressure Angle
  • Matching Design and Simulation of Powertrain Parameters for Electric Vehicles
  • Raising Torque Calculation System Design for Single-Arm Pantograph
  • Influence of Assembly Tolerance on Dynamic Characteristics of Motor Rotation Assembly
  • Modeling and Simulation of the Marine Permanent Magnet Synchronous Propulsion Motor with Direct Torque Control System
  • Numerical Analysis of the Vibration of Pipes Conveying Fluid under the Influence of Vertical Branch
  • Analysis on Circumferential Clearance of Four-Ball-Pin Constant Velocity Joint
  • The Layout Optimization for Axial Stiffness of a Flexplate Disk with Weight and Inertial Moment Constraints
  • Study on Water-Lubricated Graphite Sliding Bearing Performance Test
  • Analysis of Traction Characteristics of Grease-Lubricated Sliding Bearing
  • Test and Analysis of Steel Cable Isolator for Medical Equipments in Field Vehicle
  • Design and Research on 1kgTNT Equivalent Explosion Vessel
  • Chapter 2: Sensors, Measurement and Detection
  • A Spatial Correlation Based Data Aggregation Algorithm for Wireless Sensor Networks
  • A Spatial-Temporal Correlation Based Novel Clustering Algorithm for Wireless Sensor Networks
  • A Type of Wireless Sensor Network Platform
  • Ethanol Sensor Based on Microring Resonator
  • Dried Jujubes Online Detection Based on Machine Vision
  • The Fiber Bragg Grating Sensor and its Interrogator for Dynamic Strain Measurement of Concrete
  • Heterogeneous Convergence Model of Intelligent Perception Network Using Fiber Optic Sensing
  • Simulating on a New Elastic Element of FBG Accelerometer
  • Implementation of Modified Conjugate Gradient Algorithm in Electromagnetic Tomography Lab System
  • Improvement and Realization of Miniature Flexible Gyro in the Photoelectric Platform
  • Multi-Channel ARMA Signal Covariance Intersection Fusion Kalman Smoother
  • RF Pulse Signal Study in the SAW Delay-Line Sensor
  • Signal Process of Gas Monitoring System in Fiber Sensor
  • Special Display Instrument for Fiber Current Transformer
  • A Straight-Line Trajectory Tomography Method with Algebraic Iteration Reconstruction
  • Application and Design of Auto-Test Instrument for the Airborne Thermometer System
  • Design of an Appearance Evaluation System for Porcelain Ware
  • Measuring Theory Research on the Automobile Steering Angle Automatic Measuring System
  • Study on Comparison Analysis and Error Analysis of Polarization Ratio Models
  • Design of Microcontroller System for Surface Scanning of Micro-Steel Ball
  • Development of Monitoring and Diagnosis System for Linear Motion Unit
  • Intelligentized Soft X-Ray Picosecond Framing Camera Control System Design
  • Research on Positioning System of Insulator String Flashover in High Voltage Transmission Line
  • Study of Rapid Calibration Method of Angel of Attack Sensor and Error Impact on Flight Control System
  • The Modular Design of the Hydraulic CAT System
  • The Research on Locating License Plate of Vehicle Based on Color Conversion and Projection
  • Design of Greenhouse Monitoring System Based on Zigbee
  • Design of Meteorological Monitoring System for High-Speed Railway
  • The Fault Diagnosis of Car Body Control System Based on the CAN Bus
  • Weigh-in-Motion to Estimate Vehicle Weight of Rigid Pavement Strain Signal
  • Methodology of Micro-Accelerometer Reliability
  • Elastic Wave Measurement Technology and its Engineering Application
  • Fault Diagnosis for Marine Engine System Based on Complex Network Cluster Method
  • Chapter 2: Sensors, Measurement and Detection
  • Research on Numerical Calculation Method to Aerodynamic Noise in High Velocity Environment
  • Air Dustfall Impact on Spectrum of Ficus Microcarpa’s Leaf
  • Experimental Investigation of Piezoelectric Bimorph Cantilever on Vibration Energy Harvesting Performance
  • Structural Design and Testing of a Butterfly Piezoelectric Generator with Multilayer Cantilever Beams
  • Nonequilibrium Charge Carrier Lifetime Testing Equipment for Semiconductor Materials by a Contactless Microwave Phase Method
  • Liquid Crystal Biosensors
  • The Application of Ant Colony Optimization in Wireless Sensor Network Routing
  • Nanostep Fabrication Using FIB Technology
  • Evaluating Method of Roundness Error Based on the Maximum Inscribed Circle and Minimum Circumscribed Circle
  • Femtosecond Pump-Probe Investigation of Ultrafast Phenomenon of GaAs
  • The Simulated Calculation of Self-Levitation Force with Different Magnets Core in Ferrofluid Sensor
  • Research on Length Measurement of Workpiece Based on Digital Image Processing Technique
  • Aircraft Wing Deflection Measurement Based on PLC Control System Design
  • Lightning Protection Measures Research on Coal Mine 6kV Distribution Lines
  • Hybrid TOA-TDOA Positioning Algorithm in AIS
  • Modified Short Baseline Acoustic Relative Localization System
  • Research on Geometric Dimensioning Automatic Detection of Tubular Member
  • A Motion Vehicle Detection Method Based on Self-Adaptive Background Subtraction with Cumulative Inter-Frame Difference
  • Centroid Localization Algorithm Based on Bicubic Interpolation Gray Square Weighted
  • An Advanced Verification Environment Based on VMM
  • Development of Frequency Difference Lock Based Brillouin Sensor
  • A Robust Spline Filter Algorithm Based on M-Estimate Theory
  • The Assessment of Line-to-Plane Perpendicularity Error Based on Particle Swarm Optimization
  • Fundamental Study on the NMR Magnetic Sensor in a Time Dependent Longitudinal Field
  • Study on Magnetic Susceptibility of NMR Probe in a Time Dependent Longitudinal Field
  • Chapter 3: Data Acquisition and Data Processing, Computational Techniques
  • An Improved Kernel Principal Component Analysis Based on Chaotic Artificial Fish School Algorithm
  • Asymmetric Separators and Asymmetric Separator Spaces
  • Bacterial Foraging Algorithm Based on PSO with Adaptive Inertia Weigh for Solving Nonlinear Equations Systems
  • Bacterial Foraging Algorithm Based on Quantum-Behaved Particle Swarm Optimization for Global Optimization
  • Robust Optimization Based on an Improved Genetic Algorithm
  • A Particle Pair Optimization Algorithm
  • A Kind of Classification Algorithms of Data Mining and Quantitative Analysis
  • Image Recognition Based on Chaotic-Particle Swarm-Optimization-Neural Network Algorithm
  • Denoising Power Quality Signal Using Savitzky-Golay Based on Virtual Instrument
  • Researches on Channel Mismatch Effects in Time-Interleaved ADC System
  • The Study of Smoothness and Similarity for Denoising Signal Based on Wavelet Transform
  • A Novel Method to Segment Keyboard Characters and Symbols Using Morphology
  • The Template Matching Research Based on Multiple Images Fusion
  • An Improving Algorithm Based on SOM Clustering and its Applications
  • Multi-Dimensional Global Approximation Method Based Improved MARS
  • Out-of-Core Incremental Algorithm for 2D Laguerre Diagram and Visualization Technique
  • Improved Simulation of Double Integrals Based on Monte-Carlo Method
  • Chapter 4: Mechatronics and Robotics
  • An Approach of Robotic Kinematics Parameters Calibration
  • Design and Dynamic Analysis of Mechanical Fingers Based on ProE
  • Design and Analysis of a Hip Rehabilitation Mechanism
  • Design and Analysis of a Mechanism of Ankle Rehabilitation Robot
  • Analysis and Improvement in Color-Based Target Recognition Algorithm of Robot
  • Fuzzy Adaptive Nonsingular Terminal Sliding Mode Control for a Three-Links Spatial Robot
  • Modeling, Design and Static Analysis of Seven Degree of Freedom Articulated Inspection Robot
  • Trajectory Optimization and Simulation of Aerospace Robotic Arm
  • Review of Research Progress in Biorobot
  • Gaze Estimation Based on Single Camera
  • Human Body Detection in Search and Rescue Operation Conducted by Unmanned Aerial Vehicles
  • Vibration Analysis of Tendon-Based Parallel Robot for Processing
  • Research on Workspace of Masticatory Bionic Robot Based on the 3/3-RRRS Parallel Manipulator
  • Design and Research of an Active Search and Rescue Robot Used in Ruin Interstice
  • Model Reduction of Rigid-Flexible Manipulators with Experimental Validation
  • Study on Weld Seam Tracking System Based on Laser Vision Sensing
  • Workspace Analysis and Performance Evaluation of a 6/6 Cable-Suspended Parallel Robot
  • Dynamic Character of a Novel Three-Axis Decoupled Compliant Mechanism
  • Effects of Microstructure Types on the Evaporation Efficiency of Electrically Heated Micro Evaporator
  • Research on the Gyrocompass Dummy Fault Diagnosis System
  • Research of the Brake Pedal Feel on Wire-by-Brake-System
  • Study on Computer Simulation for Car Handling Dynamics with 8 DOF
  • Application of CAN Bus in Modern Automobile Network System
  • Global and Local Path Planning on Robotic Wheelchair Based on Multi-Sensor Information Fusion
  • Torque Performance Measurement System for Spring in Seat Belt
  • Test and Model Identification System of Electromechanical Actuator
  • A Treadmill Speed Adaptive Control Method for Lower Limb Rehabilitation Robot
  • Fabrication and Performance of a Double-Chamber Serial Piezoelectric Micropump
  • Research of Sensorless Drive of Permanent Magnet Synchronous Motor Based on Power Factor Control
  • The Operating Principle and Experimental Verification of the Hydraulic Electromagnetic Energy-Regenerative Shock Absorber
  • Research of Electro-Hydraulic Proportional Variable Displacement Piston Pump Using Fuzzy Logic Control
  • Chapter 5: Advanced NC Techniques and Equipment
  • An Improvement and Simulation of NURBS Curve Algorithm
  • Finite Element Static Stiffness Analysis of the A/C Axes Bi-Rotary Milling Head
  • Study on NURBS Curve Interpolation Based on before Acceleration/Deceleration with Linear Jerk
  • Study on the Influence Factors of Honing Efficiency
  • The Reformation of Structure to the C5225 Double Column Vertical Lathe
  • Application and Study of CNC Network System Based on DNC
  • Comprehensive Evaluation on Reliability of Machine Tools Based on Extension Method to Determine Membership Degree
  • Parameter Optimization of Thermal Error of NC Machine Based on Matlab
  • Research on the Interpolation Processing Based on the Acceleration Control Information
  • The Application of the Improved Bootstrap Method in the Verification of Maintainability Indicators of CNC Machine Tools
  • The Research on Edged Detecting in CNC Engraving Technology Based on Reverse Engineering
  • How to Guarantee the Machining Accuracy of the Improved Numerical Control Machine
  • Research of NURBS Based Approach for Fitting Contour of Windshield
  • Automated Layer Aligning and Stacking System for the Fully Dense Freeform Fabrication Process
  • An Algorithm for Determining the Nested Relation between Contours of Complex Parts Applied in Laser Cutting
  • Method of Corner Smooth Transition Based on Interpolation Spline
  • Supporting Force Analysis of Oil Pads in Hydrostatic Rotary Table of Heavy Duty CNC Machine
  • Design of a Cutting Tools Information Integrated System
  • Modeling of Dynamic Errors for a Table-Tilting Type 5-Axis Machine Tools
  • The Macro Program Design and Digital Simulation of the Automatic Tool Changer for 5-Axis Machine
  • Research on Configuration Transformation of Cutting Machine for Complex-Surface for Metamorphic Mechanism
  • Optimum Design of Machine Tool Structures Based on BP Neural Network and Genetic Algorithm
  • The Bending Vibration Analysis on the Main Drive Axis of CNC Spiral Bevel Gear Milling Machine
  • Regularity and Convexity of NURBS Curves
  • Development of Post Processor for Five-Axis Machine of Non-Orthogonal Head Tilting Type
  • Chapter 6: Control and Automation
  • The Research on the Automatic System of Circulating Garage in Stereo Car Parking
  • System Design of Numerical Control Turret Press Based on Motion Controller
  • Tension Control Strategy in Plastic Film Printing Process
  • The Research and Application of the Karst Slope Irrigation Control System
  • Retractable Conveyor Control System Design Based on PLC
  • A Study on the Control of an Anchor Auto Drop System for Ship Windlass
  • Application of Speed Observer for XY-Stage of Wire Bonder
  • A Regulator Parameter Setting Simulation Research on Double Closed Loop Speed Control System
  • Output Feedback Stabilization of Uncertain Nonholonomic Chained Systems
  • The Development of the Closed-Loop Control System for the Mechanical Suspensions Test Rig
  • A Machine Vision-Based Heating Control Design for the Microwave Maintenance Vehicle
  • Applying Automatic Fare Collection System to Estimate a Transit Passenger Trip Origin-Destination Matrix
  • Modeling on Inverse Dynamic Process of Cut Tobacco Dryer
  • Research on Tourist City Traffic Signal Intelligent Control Method
  • A Study on μ Synthesis Robust Control for Independent Drive Electric Vehicle to Enhance Stability
  • Research on Assistance Control Algorithm for Electric Power Steering System Based on Robust Control Theory
  • Stability Control for Dual-Motor Independent Drive Electric Vehicle Based on Sliding Mode Control
  • Intelligent Optimization Consider Hour Traffic Flow Traffic Lights Working Condition
  • Research and Exploration of Intelligent Brightness Control
  • The Application of DCS in the Drum Water Level Control
  • Vegetable Intelligent Monitoring System Database Design Based on the Internet of Things
  • An Intelligent Wheelchair Control System Based on F28335
  • Designing of Belt Speed Detection System Based on PLC High-Speed Counter
  • Polyvinyl Chloride (PVC) Production Plant Control System Optimization
  • Study on Intelligent Monitoring for Cooling System of Power Transformer
  • A PLC-Based Fuzzy Control System for ESP
  • Advanced Flatness Control Strategies for Multivariable Optimisation Flatness Control System of Foil Rolling Mill
  • Application of Load Sensing Technology in New Type of Steel Arch Installing Machine
  • Thrust Hydraulic System of Casing Rotater with Flow Adaptive Control
  • Research on Advance Control of Chaotic Vibration Mill with High Vibration Intensity - Base on PLC Experimental Analysis
  • Simulation and Paramatric Analysis of ABS for EV with Electric Brake
  • Adaptive Fuzzy Sliding Mode Control of Asymmetrical Hydraulic Cylinder Based on DSP
  • Research on Hardware-in-the-Loop Simulation System for Terminally Guided Projectile Guidance and Control System
  • Sliding Mode Control in Finite Time Stabilization for Synchronization of Chaotic Systems
  • The Synchronization of a Fractional-Order Chaotic System
  • Optimization Control of Ice Storage Air-Conditioning System
  • Predictive Control of Switching System for DC/AC Converter
  • Realization of Maximal Wind Energy Tracking Control Subsystem Based on RTDS
  • Based on the Application of Self-Learning Fuzzy PID Control in Tension Control System
  • A Direct Torque Controlled Permanent Magnet Synchronous Motor Drive with Variable Parameters Speed Regulator
  • Research and Development of Microcomputer Control Pneumatic Technology Comprehensive Experiment Equipment
  • Research and Optimization for Transverse Thickness Difference Control Strategy of UCMW Cold Tandem Mill
  • Research on Broken Edge Wave Control Strategy Caused by Edge Drop Control in UCMW Cold Tandem Rolling
  • The Research on Automatic System for Drawing Water from Source Based on Configuration Software
  • The Research on the Control System for Gas Spreading Ignition
  • Research on the Application of Dahlin Algorithm on Position Tracking System
  • Sevorel Conclusions of Guaranteed Cost for Uncertain Discrete Singular System
  • Chapter 7: Electronics/Microelectronics Technology
  • The Application of New Reagent in the Copper Wiring CMP
  • A Ku-Band Low Noise Amplifier Based on Transformer
  • A Reconfigurable Compact Coupled Line Multiple-Band Bandpass Filter
  • Design and Analysis of Dual-Mode Double-Square Loop Resonator for Bandpass Filter Applications
  • Control Strategy for Fault-Tolerant Paralleling Active Power Filter
  • Research of Single-Phase Two-Stage Photovoltaic Grid-Connected Inverter
  • Investigation of the Temperature Character of IGBT Failure Mode Based the 3-D Thermal-Electro Coupling FEM
  • Arbitrary Waveform Generator Based on GaAs FET and Tapered Micro-Strip Line
  • A Small PV Temperature Control System
  • Stability Problem Research of Infrared Camera Critical Point Image
  • Research on SVPWM Algorithm for Three-Level Based on Active Area Vector Method
  • The Design of 12-Channels Acquisition and Storage System Based on FPGA and AD7492
  • A Dual-Loop-Based Parallel Power Supply System
  • Dual-Band BPF Using Simple SIR Structure
  • Using FEA Simulation and Experimental Models of Flexible Substrates to Assist the Technology of Miniaturization of Electronic Devices
  • Chapter 8: Advanced Decisions for Automatic Manufacturing
  • Bottleneck Mitigation of Assembly Lines with Memetic Algorithms
  • A Hybrid Population-Based Incremental Learning Algorithm for M-Machine Reentrant Permutation Flow-Shop Scheduling
  • Cooperation Efficiency Analysis for Bargaining Based Assembly Scheduling
  • Production Planning Optimization in F Company: A Scheduling Theory Case Study
  • The Resource Conflicts Detecting Method of Virtual Manufacturing Cell Based on Bayesian Network
  • Three Dimensional Assembly Tolerance Analysis of Gear Drivetrain
  • Reach on the Application of Digital Factory Technology in Process Planning and Line Teaching Field of Automobile Manufacture
  • Reach on the Buffer Capacity Design between Body Shop Lines of Aar with Simulation Analysis
  • Research on Open Shop Scheduling Based on Genetic Algorithm
  • A Modified Genetic Algorithm for Sequencing Problem in Mixed Model Assembly Lines
  • Computer-Aided Production Control of Automobile Injection Molds Based on Process Perception
  • Research and Application of the Visual Assembly System Based on the Process Lightweight Model
  • Cubic Polynomial Trajectory Planning Algorithm Based on Ideal Drive Force for Aircraft Fusagle Automatic Position and Pose Adjustment
  • An Automatic Product Assembly Method Based on Assembly Feature Pair
  • Analysis and Construction of Automobile Steering Gear Model Library Based on CATIA
  • Research on the Key Technology of Realizing Roll Rapid Drawing System
  • An Expert System for Aided Design of Rice Transplanter Chassis Systems
  • Prediction of Cutting Tool Life Based on ACO-BP Meural Network
  • Bayesian Network Based Expert System for Seismic Performance Assessment
  • Fault Reasoning and Diagnosis Technology Based on ACO & CBR
  • Research on the Expert System for Sweet Corn Standard Production Based on Heterologous Data Integration Technology
  • Research on the Ontology Knowledge Base Yunnan of Seed Plants Endemic Genera
  • The Research and Structure of the Dynamic Workflow Engine
  • Chapter 9: Information Processing Technologies
  • The Application of Oversampled Chebyshev Chaotic Sequences in Voice Communication Encryption
  • Using Semantic Constraints for Question Answering
  • Data Transmission Mechanism Supporting Fairness and QoS in Wireless Sensor Networks
  • Membrane Computing Model Design with Quantum-Inspired Evolutionary Algorithms
  • A Trust Model Award Content Security and Rating Supervision Model
  • Safety Information Dissemination Path Prediction in High-Density Vehicular Wireless Networks
  • Analysis and Research of BPF Filter Based on Libpcap
  • Application of Improved B+-Trees Algorithm in Embedded Database
  • Automated Safety Integration Analysis of Complex System Based on Functional Model
  • Search on Method of Netwok Intrusion Detection Based on Support Vector Machine with Pre-Extracting Support Vector
  • A Novel Communication Model Based on SOAP and SCORM in E-Learning
  • A Novel Method for Mining the Advisor-Student Relationships in Academic Social Network
  • A Query Optimization Modle and Algorithms for XML Data File
  • Novel Long-Term Information Based Language Identification
  • Survey on the Web Services Security Specifications
  • Research on Database for Aluminum Alloys
  • Research on Search Engine Marketing for Small and Medium-Sized Material Enterprises
  • Research of Cloud Computing in Management Information System
  • The Standardization of Folksonomy Based on Ontology Technology
  • Model of the Enterprise Value Management System
  • Qnew-Video Course Consultative System
  • Chapter 10: Technologies in Architecture and Construction
  • Frequency Response Calculation of Multi-Span Simply Supported Bridge
  • Chinese Traditional Elements in Contemporary Landscape Architecture of the Symbolization Research
  • Cold Trapezoidal Channel Composite Lining Structure Force Analysis and Failure Criteria
  • Performance of Multi-Layer Soil Electric Resistivity Model Comparing with Two-Layer Characterizations in Geotechnical Investigations
  • Influence of Damage of Suspenders on Static Performances of Steel-Box Stacked Arch Bridge
  • Intact Loess Structural Loss Parameter in Humidification Process
  • The Field Test of Solar House of Building with Altitude of 5000m in Tibet
  • A Numerical Study on Response of Foam Sandwich Beams with Corrugated Skins Subjected to Large Deflection
  • The Error Analysis of GPS-RTK Construction Stakeout
  • Solution of Slope of a Frame Based on Simple Support Beam Coming from Method of Changing to Rigidity by Step Combined with Conversion Method
  • Simulation Calculation and Construction Control of Xiaolan Channel Super Large Bridge
  • Phase Change Materials Packed Module Using in Floor Heating
  • Building Modification of Container Type Multi-Functional Space Based on Low Carbon Materials
  • The Application of Pressure Grouting Technology in Foundation Treatment of Clarifiers
  • Distinction and Relationship between Plant Protection and Engineering Support for Expressway Slope
  • Chapter 11: Technologies and Equipment in Medicine
  • Determination of Bacillus Calmette-Guerin Concentration Integrated in Delivery Materials for Intravesical Infusion Therapy of Superficial Bladder Cancer
  • Effect of Probiotics on the Growth Performance and Muscle Composition of Crucian Carp
  • Study on Nano- and Microcrystallites in Urines of Uric Acid Stone Patients
  • Study of Molecular Docking of Mu Opioid Receptor Agonist - Fentanyl and its Analogs Based on Docking
  • Boundary Element Numerical Method for Electric Field Intensity Generated by Oblique Twelve - Needle Electrodes in Biological Tissue
  • The Research of Laryngeal Reconstruction with Personalized Artificial Larynx Using Tissue Engineering
  • Chemical Constituents and Cytotoxic Activity of Gentiana farreri Balf.f.
  • Algorithm of Dynamical Pulse Rate Based on Comparison of Slope Summation
  • Enhancement Algorithm Combining Pseudocolor Processing and Marker-Based Watershed Transform for Medical Image
  • The Design of Drug Circulation Quality and Safety Control System Based on the Internet of Things
  • Service Life Study of the Artificial Knee-Joints of Crossed Pairing
  • Chapter 12: Technologies in Food Industry and Agriculture
  • The Application of PVA Antibacterial Film with Clove Oil/β-Cyclodextrin Inclusion Complex in Fruit Packaging
  • Extraction of Fish Oil from the Muscle of Sturgeon Using Supercritical Fluids
  • Optimization of Co-Culture Condition for Lactobacillus delbrueckii subsp. bulgaricus with Weak Post-Acidification Ability and Streptococcus thermophilus
  • Response Surface Methodology for Optimization of the Ultrasonic Extraction of Polysaccharides from Melaleuca ahemifolia
  • Effect of the Addition of Stearic Acid on Starch Properties
  • Study on the Control Technology Device of Alternating Magnetic Field Inducing the Plants to Breed
  • The Relationship Model of Light Interception and Plant Cultivation Form
  • Research on Mass of Leaves Estimation
  • Chapter 13: Products Design
  • Design and Applications of Solar Powered Textiles
  • A Multi-Agent System for Remanufacturing of End-of-Life Products
  • A Study into Green Package Design Practice
  • Cable Arrangement in Aircraft
  • Design and Applications of LED in Chinese Knots
  • Design Process and Printability of Cigarette Packaging Materials
  • Research of FFE in TRIZ Theory
  • Study on Architecture of Missile Design Service Platform Based on Virtual Design Unit
  • Modern Design: Industrial Technology, Engineering and Culture
  • Analysis the “New Concept” of Modern Product Design
  • Configurable Product Structure Model Based on Semantic Network
  • Design of Workflow Subsystem in Drawing Management System
  • Closed-Form Optimal Tolerance for Minimum Manufacturing Cost and Quality Loss Cost
  • Study on Influence of Back Angle on Human Body Pressure Distribution
  • An Analysis of the Influence of Visual Perception Characteristics to the Usability Design of Infants Aapplication Interface
  • Study on the Needs of Religious Mobile Application Software for the University Christian Student Group
  • Research on the Application of Advanced Surface Based on AliasStudio
  • Analysis of Mechanical Characteristics and Optimum Structural Design of Gear
  • Chapter 14: Engineering Education
  • Research and Implementation of Remote Virtual Teaching Platform on VRML-Java
  • Curriculum Reform Practice Based on PBL Teaching Mode
  • Engineering Concepts Guiding Engineering Curriculum and Management Mechanism for Engineering Majors Newly Established
  • Establishment of Multi-Disciplinary Training Project System for Engineering and Cultivation of Engineering Quality
  • Exploration in the Curriculum and Teaching Based Cultivation of Innovation Capabilities for Graduate Students
  • Platform Construction: A New Model for the University-Enterprise Cooperation
  • Research and Practice of Open Experiment on PHYWE
  • Research of a New Teaching Model and its Application in Industrial Engineering Discipline
  • Study on Problems and Countermeasures in Practice Teaching of Undergraduates in Mechanical Industrial Design Major
  • Analysis of Turning Process Relative to Machining Technician's Skills
  • Engineering Quality Cultivation for Professional Degree Graduate
  • Research and Application on Engineering Cases Based Three Stages Teaching Methodology
  • The Scientific Picture of the World as a Basis of Nanoelectronic Engineer’s Professional Competence
  • Application of Learning Project Instruction Method in Biochemistry Teaching for Municipal Engineering Graduate
  • CAD Compositive Capability Cultivation of College Students in Engineering Practice
  • Research on Establishment of Practical Teaching Platform for Welding Specialty
  • Research on Talent Training Mode Reform of Material Forming and Control Engineering Major
  • The Application and Development of Teaching Technology of Petroleum Engineering Specialized Foreign Language
  • A Brief Talk on the Use of “Task-Oriented” Teaching in Military Academies
  • The Study of Engineering Geology Teaching Based on the Creativity Thinking Training
  • Explore the Sustainable Value of Bamboo during the Teaching of Materials and Technology of Product Design
  • Discuss about Fast Response Performance of under-Damped Second-Order System in Time Domain
  • Chapter 15: Economics, Marketing and Engineering Management
  • Study on the Life Cycle Security Risks Management of Large-Scale Public Buildings
  • Discussion of the Key Factors in Oil Spill Risk Prevention in Offshore Oilfield Development
  • Rebar Futures Basis Characteristics and Analysis of its Effect on Hedging
  • Competency Models Utilization in Industrial Enterprises
  • Process Analysis of Construction Quality Management System for Water Project Based on Dissipative Structure Theory
  • Research on Competition Strategy Choice of Real-State Quality Based on Hierarchy-Fuzzy Decision Method
  • The Contribution Analysis of Science and Technology Service Industry of Liaoning to Manufacturing Industry - Based on Clustering Analysis on Direct Consumption Coefficient
  • Freeway Environmental Risk Assessment and Countermeasures
  • Effectiveness of ISO 14000 Environmental Management Systems in Malaysian Manufacturing Industries
  • Review on Foreign Study of Corporate Bond Spread
  • Investigation on Evaluation of Terminal Departure Capacity Based on Route Intersection
  • Repair Purchase Intention in Product Harm Crisis
  • Safety Rules and its Technical Implementation of Campus Network
  • The Two-Step Pricing Strategy Research of Regional Logistics Information Platform Based on Game Theory
  • The Impact Factors Analysis of the Continuous Safety of the Yangtze River Shipping
  • Manufacturing Industries Transfer Trend in China 1999 - 2010
  • The Application of Structural Adhesives in the Bridge Reinforcement
  • Relative Structure on Main Influence Factors of International Trade of New Energy Materials
  • A Process Innovation Knowledge Management Framework and its Application
  • Principal Factor Analysis for Main Raw Materials’ Transformation Efficiency in Iron-Making Systems
  • Research on the Bogie Maintenance for the Safely Running of Passenger Car
  • Study on Remanufacture Based on Customer’s Environment Preference
  • A Hybrid PSO Algorithm for Vehicle Routing Problem with Simultaneous Delivery and Pickup
  • Research of Asymmetric Quality Loss Function with Triangular Distribution
  • Case Study on FMECA and Risk Assessment for the Door System in High Speed Train
  • Developing Equipment Manufacturing Industry Based on Service-Oriented Manufacturing
  • Research on Models of Technology Innovation Systemic Risk and Early Warning of Materials and Manufacturing in SMEs
  • Equilibrium Strategies of Contract Choice Game between Supply Chains with Uncertain Demand
  • One-Piece Flow Implementation Research in the Garment Enterprises
  • Regional Logistics Information Platform User Growth Research Based on System Dynamics
  • Large-Scale Mechanical and Electrical Equipment Installation Project Management Research
  • Application of Lean Production in Company K
  • Assembly Process Improvement in Company S: A Lean Six Sigma Case Study
  • Key Technologies for Development of Track Utilization Decision Support System in Railway Passenger Stations
  • The Second Methode to Explore the Boat Schedule of Big Long River
  • Layout Optimization Base on Election Campaign Algorithm
  • Army Unit Warfare Simulation Experiment by Using Agent Technology
  • Fast Tabu Search Algorithm for Solving Multi-Vehicle and Multi-Cargo Loading Problem
  • Medium Voltage Distribution Network Planning of City Based on Reliability
  • The Mathematical Discription and Model Study of System Reliability
  • Reliability Evaluation of Ship Driver Based on Failure Mode Effects and Criticality Analysis
Les mer

Produktdetaljer

ISBN
9783037856482
Publisert
2013-03-27
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
4700 gr
Høyde
240 mm
Bredde
170 mm
Dybde
128 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
2558

Redaktør
Jiang, Zheng Yi
Liu Xianghua
Jiao, Si Hai
Han, Jing Tao

Relaterte produkter