Produktdetaljer
ISBN
9783037859728
Publisert
2014-03-12
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
6200 gr
Høyde
240 mm
Bredde
170 mm
Dybde
167 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
3330
Collection of selected, peer reviewed papers from the 3rd International Conference on Energy, Environment and Sustainable Development (EESD 2013), November 12-12, 2013, Shanghai, China.
The 596 papers are grouped as follows:
Chapter 1: Development and Utilization of Solar Energy;
Chapter 2: Development and Utilization of Wind Energy;
Chapter 3: Development and Utilization of Biomass Energy;
Chapter 4: Energy Storage Technology;
Chapter 5: Еnergy Сonsumption and Energy-Saving Technology;
Chapter 6: Hydrogen and Fuel Cell;
Chapter 7: Energy Materials;
Chapter 8: Energy Chemical Engineering;
Chapter 9: New Energy Vehicles and Electric Vehicles;
Chapter 10: Green Building Materials and Energy-saving Buildings;
Chapter 11: Engineering Thermophysics;
Chapter 12: Thermal Engineering;
Chapter 13: Fluid Engineering and Machinery;
Chapter 14: HVAC, Air Conditioning and Refrigeration;
Chapter 15: Power Machinery and Engineering:
Chapter 16: Power System and Automation;
Chapter 17: High Voltage and Insulation Technology;
Chapter 18: Motor and Electric Equipment;
Chapter 19: Electrical Theory and New Technology;
Chapter 20: Power Electronics and Power Drives;
Chapter 21: Smart Grid Technologies;
Chapter 22: Power System Management;
Chapter 23: Product Design and Manufacturing Automation;
Chapter 24: Precision Automation;
Chapter 25: Application of Computer and Information Technology in Industry;
Chapter 26: Engineering Education;
Chapter 27: Project Management and Engineering Management
Les mer
<p>Selected, peer reviewed papers from the 3rd International Conference on Energy, Environment and Sustainable Development (EESD 2013), November 12-13, 2013, Shanghai, China</p>
- Preface and Conference Organization
- Chapter 1: Development and Utilization of Solar Energy
- Study on Optimum Installation Angle of Photovoltaic Module Considering Sunlight Reflection
- A Comprehensive MPPT Algorithm of the Solar Batteries Energy-Saving Control System
- The Study on a Simplified Model of Photovoltaic Power System
- Experimental Study on Direct Coupling in a Photovoltaic-Electrolyte Hydrogen Generation System
- Techno Economic Evaluation of Biogas Integrated Parabolic Trough Solar Energy Combined Cycle
- Design of Linear Fresnel Lens for Concentrated Photovoltaic System
- Impacts Assessment of a Solar Energy Project under the Perspective of Sustainable Livelihood with Wenhai Village, Lijiang as an Example
- A Solar Powered Battery Charger with Pulse Charging Method and Maximum Power Point Tracking Method
- The Calculation of Radiation and Optimum Tilt Angle on the Inclined Plane of South-Facing Collector in Winter Months
- Estimation of Daily Global Solar Radiation with Measured Meteorological Data in Xining, China
- The Application of Image Recognition in Mobile Solar Power Device: Based on Light Intensity Detection in Shaded Area
- Selection of Working Fluids for Medium Temperature Heat Pipes Used in Parabolic Trough Solar Receivers
- Investigation of Annealing Effect on Optoelectronic Performance of Active Layer in Poly Organic Solar Cell
- Review of Economic Operation Optimization Strategy of Photovoltaic Grid-Connected System
- Effects of Tube Space on the Thermal Performance of Water-in-Glass Evacuated Tube Solar Water Heaters
- High Instantaneous Efficiency and High Flow Rate Slotted-Plate Solar Collectors
- Experimental Investigation of Solar Photovoltaic, Heat Coupling Water Source Heat Pump Heating System
- Numerical Simulation Study of a New Type Solar Collector Wall System
- Study on Evacuated Tubular Solar Air Collector with Inserted Tubes
- Point-Location Problem for Indoor Daylight Factor Computations
- Periodic Nanostructured Thin-Film Solar Cells
- Feasibility Analysis of Hybrid Power System Used on Solar-Powered Aircraft
- Quantum Cutting down Conversion by Cooperative Energy Transfer from Tb3+ to Yb3+ in CeF3 Nanophosphors
- Design and Implementation of a Photovoltaic Power System with Bi-Directional Inverter
- Research on Short-Term Load Prediction Including the Photovoltaic System
- Numerical Simulation of Air Flow in BiPV-Trombe Wall
- A Numerical Study on Integral Solar Air Collector
- The Study and Design of 20kW Photovoltaic Power System
- Modular Design of Control System for Photovoltaic Inverter
- The Challenges and Strategies of Diffusion for Solar Energy Application on Taiwan Buildings
- Research on Control Strategy of the Stand-Alone PV/Battery System
- PV System Power Forecasting Based on Neural Network with Fuzzy Processing of Weather Factors
- Research on the Solar Water Heating System Based on the Internet of Things
- Development of Empirical Equations for Irradiance Profile of a Standard Parabolic Trough Collector Using Monte Carlo Ray Tracing Technique
- Experimental Investigation and the Development of Phase Change Heat Storage Device Adapted to the Solar Energy Heat Pump
- Optimization Design on Experimental System for Space Heating of a Ground Coupled Heat Pump with Solar Thermal Collectors
- An Optimized MPP Tracking Algorithm under Partially Shaded Conditions in Photovoltaic System
- Fault Tree Establishment of Lightning Protection System Safety of Solar Photovoltaic Building
- Analysis of a New Life Cycle Assessment Model Based on the Solar Building Integrated Technology
- Novel Post-Treatment Process by La3+ Modification to TiO2 Photoanode with Enhanced Performance for DSSCs
- Performance Study of a Solar Adsorption Refrigeration System
- Integrated Design of Solar Water Heater System and High-Rise Residential Buildings
- Chapter 2: Development and Utilization of Wind Energy
- The Equivalent Method of Wind Farms Considering Wake Effect
- Thermal Analysis and Design of the Cryogenic System for 12 MW Offshore Superconducting Wind Turbine
- Slip Analysis of Wind Turbine Angular Contact Ball Bearing
- SPIV Analysis of the Tip Vortex Evolution of a Horizontal Axis Wind Turbine
- Research of Aggregated Wind Power Prediction Method for a Region
- Study on Stability Improvement of Wind Farm Integrated to Weak Grid by VSC-HVDC
- Optimization Allocation of Standalone Microgrid Capacity Based on the Complementary Characteristic of Wind and Solar
- Analysis of Power Flow on Power System with Wind Power Grid
- Combining AHP and TOPSIS Methods to Evaluate Investment for Wind Farm Construction
- The Review on the Topology of Battery-Supercapacitor Hybrid System Applied into the Real-Time Wind Power Suppression
- Modeling and Analysis of Large-Scale Wind Power Cluster Effect
- The Optimal Spinning Reserve Considering Wind Power Prediction Deviation
- Performance Testing and Dimensional Analysis of Multi-Blade Wind Turbine for Low Wind Speed Applications
- Effect of Wind Farm on Transient and Small-Signal Stability Based on BPA
- A New Structure for Low Speed Wind Turbine in Built-Up Areas
- Subsynchronous Interaction and its Mitigation in DFIG-Based Wind Farm and Turbine-Generator Bundled Systems
- Numerical Simulation Study of Wind and Wave Energy in Yellow River Delta
- Power Quality Simulation of Grid-Connected Doubly Fed Wind Turbine
- Sensorless Control of Doubly-Fed Induction Generator Based on Adaptive Sliding-Mode Observer
- The Time Domain Analysis of the Flutter of Wind Turbine Blade Combined with Eigenvalue Approach
- Study on Power Characteristics of Hybrid Wind, Photovoltaic Generation and Energy Storage
- Multi-Objective Optimal Dispatch of Power System with Wind Power Based on Improved Particle Swarm Algorithm
- A Hybrid Short-Term Wind Speed Forecasting Model Based on Wavelet Decomposition and Extreme Learning Machine
- Analysis on Low-Carbon Comprehensive Benefit of Wind Power
- Analysis on the Policies of Wind Power Generation Industry in China - In the Perspective of Externality Theory
- Research on Preventive Maintenance Cycle Decision of Wind Turbine
- Study on Automatic Active Power Control System of Wind Farms
- The Power of Wind Turbine Generators Prediction Model Based on Time Series
- Security and Economy Analysis of Power Grid Considering the Uncertainty of Demand Side and Generation Side
- Regional Wind Power Forecasting Based on Cloud Model and Wind Rate Vector
- Considering Wind Power Abortively Based on Petri Net Research on Optimization of Hydropower
- An Multi-Objective Optimization Model for Wind-Storage Combined Operation
- Impact of Wind Farms on the Voltage of the Grid Integrated under the Ramp Changing Wind Speed
- A MPPT Strategy for Wind Power PMSG System with Full Power Converter
- The Study of VSC-HVDC System Simplified Model on Large Offshore Wind Farm
- Chapter 3: Development and Utilization of Biomass Energy
- Investigation of Thermoelectric Power Generation Module on Waste Heat Recovery in a Downdraft Gasifier
- Progress of Biomass Gasification Technology in China
- Feature Analysis during Corn Stover being Enzymatic Hydrolyzed into Fermentable Sugars
- Biomass Oxygen-Enriched Gasification in a Pressurized Fluidized Bed for Production of Middle/High Heat-Value Fuel Gas
- Overexpression of atpI Encoding ATP Synthase Enhances the Electricity Production in Microbial Fuel Cells
- Biomass Catalysis Pyrolysis for Furans Chemicals
- Electricity Generation from Crystal Violet Using a Single-Chambered Microbial Fuel Cell Inoculated Aeromonas hydrophila YC 57
- Research Progress on Biomass Liquid-Fuel Products by Thermo-Chemical Conversion
- Thermal Characterization Study of Eucalyptus Sourced from South China with Thermo-Kinetic Analysis Method
- Formic Acid Production from Hydrothermal Reaction of Cellulose
- Predicting Main Fatty Acids, Oil and Protein Content in Intact Single Seeds of Groundnut by near Infrared Reflectance Spectroscopy
- Hydrothermal Conversion of Cellulose into Organic Acids by Metal Oxides
- Conversion of Microalgae under Hydrothermal Conditions
- Effects of Primary Settling Tank on Denitrifying Phosphorus Removal in a Full-Scale AAO Process
- Dynamic Model of Rapeseed Oil Hydrolysis Reaction in Sub-Critical Water
- Unconventional Type of Biomass Suitable for the Production of Biofuels
- Co-Pyrolysis Charateristics Study of Dianchi Lake Sludge and Coal
- Experimental Research of Biomass Pyrolysis Characteristics at Low Temperature
- Preparation of Activated Carbon from Formic Acid Hydrolysis Residue by Chemical Activation of ZnCl2
- Potassium Solubility of the Fly Ash from Corn Straw Power Plant
- Economic Analysis of Biogas Cogeneration Systems of Medium-Sized Breeding Plants
- Marginal Land-Based Biomass Energy Production in Yellow River Delta
- Pyrolytic Behavior and Kinetic Analysis of Wheat Straw and Lignocellulosic Biomass Model Compound
- A Research on the Performance of a Common Rail Diesel Engine Fueled with Different Blending Ratio of Biodiesels
- Chapter 4: Energy Storage Technology
- Application of Technology of the Internet of Things on the Monitoring of Geothermal Field
- Power Supply & Storage Capacity of Distribution Network with Multiple Energy Storage Systems and its Application
- Optimal Sizing of Battery Energy Storage System in Distribution Network
- New Approach to Fabricate Microcapsules with Comb-Like Copolymer Shell by Phase Separation Method
- Simulation on Control Strategies of Hybrid Energy Storage
- Energy Efficiency Analysis of Preheating Boiler Feedwater System with Air Source Heat Pump
- Thermal Conductivity Enhancement in a Latent Heat Storage Device
- A Nonlinear Piezoelectric Energy Harvester from the Vibration of Magnetic Levitation
- The Isolation DC-DC Partial Voltage Charge Equalization on Lithium-Ion Power Battery
- Research on Designation and Control System of A-NPC Three-Level Battery Power Storage Converter
- Control Strategy of the Hybrid Energy Storage System for Leveling Off Fluctuating Power Output of Stand-Alone Photovoltaic System
- Chapter 5: Еnergy Сonsumption and Energy-Saving Technology
- The Passive Ventilation Energy-Saving Strategies of Urban Long-Distance Bus Station
- Greenhouse Earth to Air Heat Exchanger and its Research Progress
- Analysis of Energy-Saving and Pollutant Emission for Different Floor-Radiation Heating Control Modes
- Study of the Energy Consumption Characteristic of a 1000MW Ultra-Supercritical Unit
- Effect of Apply Pinch Analysis Theory to Distributed Energy Systems Integration
- Analysis of Cement Kiln Waste Heat Power Generation System Using the Exergy Analysis Method
- Review on the Heat Transfer Enhancement by Inserting Circular Cylinders
- A Numerical Study on Heat Transfer Enhancement of Automobile Thermoelectric Generator
- Deviation Analysis on Flow and Heat Transfer Model of Large Air-Cooled Steam Condenser Unit
- The Application of the Green Energy in HVAC
- Development of Special Users' Energy Saving Potential New Intelligent Diagnosis Detector Based on DSP2812 Technology
- Optimization of Condenser Vacuum Based on Neural Network and SA-BBO
- Simulation and Analysis of Ship Energy Efficiency Operation Index
- Energy-Saving Blast Dehumidification System for Blast Furnace
- Mechanism of Energy-Consumption Benchmark State for Coal-Fired Power Units with Varying Boundary
- Numerical Simulation of Corrugated Depth on the Performance of Plate Heat Exchanger
- Energy Saving Application in Constant Pressure Water Supply System Based on SANCO - vm05 Frequency Converter
- The Research on Energy Saving of Pump Fluid Conveying System
- Numerical Simulation and Experimental Validation of a Vertical U-Tube Ground Heat Exchanger
- Co-Benefit Analysis on Fuel-Switching Project for District Heating
- Research on the Technology of Intelligent Control Terminal Personalized Heating Heating System
- Application Research of Reclaimed Water Source Heat Pump Techniques in Beijing
- Research on Reclaimed Water Heat Energy Conditions and Application in Beijing
- Analysis of Ejector in Central Air Conditioner Combined with Solar Ejector Refrigeration System
- Analysis on Chilled Water Spraying through Extraction Opening in Condenser to Enhance Extraction Effect of Vacuum Pump
- Research on the Industrial Energy Use of Sustainable Development Test Zone in Beijing
- The Dispatch Method Based on Demand Response under the Pressure of Energy-Saving
- Numerical Simulation of a Shell-and-Tube Heat Exchanger with Special Form Helical Baffles
- Review of Study on the Early-Warning System of Energy Conservation
- Aspen Simulation of Heat Exchange Network for the Conversion System of Sulphuric Acid Made with the Sulphur
- Aspen Optimization of Heat Exchange Network for the Conversion System of Sulphuric Acid Made with the Sulphur
- Investigation on the Simulation of Control Strategy for a SCR System
- Study on Creep Behaviors of T92 Steel under Multiaxial Stress State
- Research on Resistance Spot Welding of DP980 Dual Phase Steel
- The Analysis of Current Implementation Mechanism of Green Power
- Chapter 6: Hydrogen and Fuel Cell
- Enhanced Anticorrosion Properties of SnO2 Coatings in Simulated PEMFC Environments by Hydrothermal Treatment
- A Review of Pt-Based Anode Catalysts Preparation for Direct Ethanol Fuel Cell
- Chapter 6: Hydrogen and Fuel Cell
- Synthesis and Characterization of Sulfonated Polybenzimidazole (SPBI) Copolymer for Polymer Exchange Membrane Fuel Cell
- Electrical Characterization of YSZ/YSZ-NiO Grown by Pulsed Laser Deposition for Low Temperature Solid Oxide Fuel Cells
- Recent Progress for TiO2 as the Support of Electrocatalysts in Fuel Cell Applications
- New Progress in Microbial Fuel Cells and its Outlook
- Preparation of Co3Ni Film Composed of Nanosheets and their Catalytic Activity in Hydrogen Generation from Sodium Borohydride Solution
- A Review of Pd-Based Electrocatalyst for the Ethanol Oxidation Reaction in Alkaline Medium
- Multi-Walled Carbon Nanotubes as Electrocatalyst Supports for H2O2 Reduction Reaction
- Influence of Ethanol Catalyzed Oxidation on the Activity of Pd/C with Different Ratio of Pd and Carbon
- Analysis on some Key Problems of High Power DCDC Converter for Fuel Cell Electrical Bus
- Chapter 7: Energy Materials
- Preparation of SiO2 Antireflective Film by a Base/Acid Two-Step Catalyzed Sol-Gel Process
- Effect of the Precursor Solution Concentration and Modification Ions on the Catalytic Property of La-Hexaaluminate Catalysts
- Progress of Research on Modification in Polybutylene Terephthalate
- The Investigation of Phase Change Emulsion (PCE): Fabrication, Thermal Conductivity and Utilization of Nanoparticles
- An Inverse Research Method for the Radiation Characteristics Based on Particle Swarm Optimization Algorithm
- Finite Element Analysis of Piezoelectric Materials
- Research Progress of Layered xLi2MnO3-(1-x) LiMO2(M=Ni,Co,Mn...) Solid Solution Materials
- Crystallization Behavior and Infrared Radiation Properties of Copper Ferrite-Doped MgO-Al2O3-SiO2 Ceramics
- Preparation of High Voltage Spinel LiNi0.5Mn1.5O4 Cathode Material Using Polymer-Assisted Co-Precipitation Procedure
- Growth of Thick Ge Epilayers on Si(100) Substrates Utilizing Two-Step Approach by Ultrahigh Vacuum Chemical Vapor Deposition
- Analysis on the Micro Surface Morphology of Aged Oil-Paper Used in Power Transformer
- Kinetics Modeling of Parabolic Growth Competing to Linear Declining: A Theoretical Tool to Interpret Corrosion Data in Real World
- Preparation and Characterization of Porous Silica Antireflective Thin Film on Glass Substrates by Chemical Etching
- Photocatalysis Reactivity in the Visible Light of B-Doped TiO2 Nanotube Arrays
- Influence of Acetylene Black Colloidal Solution on the Reactivation of the Simulation and Deactivation PbO2/PbSO4 Electrode
- The Development Trends of Renewable Energy at Home and Abroad and Material Problems
- Effects of Additional Mg2+ on the Growth and Lipid Accumulation of Monoraphidium Sp. FXY-10 under Mixotrophic Conditions
- Synthesis, Characterization and Electrochemistry of Cathode Material Li [Li0.2Mn0.54Ni0.13Co0.13]O2 Nanofibers Prepared by Electrospinning for Lithium Ion Batteries
- High Performance SiOC Composites as the Anode Material for Lithium-Ion Batteries Synthesized by Ball Milling
- Optimizing Design of LEDs with Photonic Crystal and Planer Micro Cavity for High Extraction Efficiency
- Experimental Study on the Preparation Process of Binary Carbonate Salts
- Review on Phase Change Material Slurries
- Study on Al2O3 Coated Carbon Sulfur Composite Materials for Lithium-Ion Battery
- Comparison of Lini0.5Mn1.5O4 and LiMn2O4 for Lithium-Ion Battery
- Contrastive Analysis on Low Temperature Carbonization of Longkou and Yaojie Oil Shale in Aluminum Retort
- Analysis on Fracture Morphology and Microstructure of T92 Steel after High Temperature Multiaxial Creep
- Research on Creep-Fatigue Life Prediction for P92 Steel under Stress-Controlled State
- Laboratory Simulation of Radon Migration in Porous Aquifer Medium
- Chapter 8: Energy Chemical Engineering
- N2 and CO Desorption from Interaction between NO and Nitrogen-Containing Char
- Experiment Research on Power Molding and Destructive Distillation of Yaojie Oil Shale
- Process Simulation on Crude Naphthalene Purification by Extractive Distillation
- The Effect of Lignite Catalytic Pyrolysis on Liquid Components
- Synthesis of Guerbet Alcohol Acrylate Aided by Microwave
- Kinetics Analysis of Wheat Straw Pulping Process
- Effect of Rare Earth for Removal of Carbonyl Sulfide from Synthesis Gas
- Study of Catalytic Cracking of Asphaltene in Near-Critical Water
- Development of Polymer Gel Plugging Removal Agent in Suizhong 361 Oilfield
- Analysis on Factors Affecting Biodiesel Production Rate Based on Probability Theory
- The Calculation of Physicochemical Parameters in the Mimetite Dissolving Process
- Effects of Modified Glycerol Distillation Residues (MGDR) on the Performance and Hydration of Portland Cement
- Exploring of the Effects of Ionic Liquids on Methane Hydrate Formation
- The Sensitivity Analysis of CO2 Recovery & Liquefaction Flowsheet in the Beer Fermentation Process by Aspen Plus Software
- Chapter 9: New Energy Vehicles and Electric Vehicles
- The Overview of Electric Locomotives Capacitor Bracket Parametric Design Based on the Secondary Development of Pro/E
- A Study on the Spray Characteristics of SIDI CNG Engine Based on a Visualization System
- Space-Time Modeling of Plug-In Electric Vehicles
- Test and Simulation System of Multi-Axis Controller
- Coordinated Control for Novel Full Hybrid Vehicles
- The Research of New Energy Hybrid Power Technology Based on 100% Low-Floor LRV
- Smart Home Energy Management with Electric Vehicles Considering Battery Degradation
- Study on Factors Affecting the Range of Electric Vehicle with ADVISOR
- Reliability Evaluation of Fast-Charging EV Station Entry to Generation and Transmission Electrical System
- Testing of Remote Monitoring Calibration and Diagnostic System for Electric Vehicle
- Technical Economic Analysis on V2G Mode Shifting Peak Load
- Periodic Control of General Energy Flowing in Charging-Discharging-Storage Integrated Station
- Control Strategy of the Charging-Discharging-Storage Integrated Station on Reactive Power/Voltage of Power System
- A Study on the Factors Affecting Consumers Adoption Toward Environmentally Friendly Car - Hybrid Car
- Modeling and Simulation of LiFePO4 Battery for Electric Vehicle
- Discussion of the Relationships among the Main Participants Based on the Electric Vehicle Commercial Mode
- Comparative Analysis on Emission between Hybrid and Conventional Vehicles
- An Adaptive Charging Control Strategy for Electric Vehicles Based on Wi-Fi Technology
- The Application of PLC in the Electric Vehicle AC Charging Technology
- Review of Research on Coordinated Charging of Electric Vehicles
- Study on the Regularity of EVs' Charging and Discharging Group Behaviors
- Chapter 10: Green Building Materials and Energy-Saving Buildings
- An Lectotype Analysis of the Architectural Structure of the Hmong in Hunan
- Foam Concrete through Electric Technology
- Testing and Analysis on Building Thermal Stability in Hot-Humid and Cold-Humid Area in Summer
- The Mechanism of Action of the Low Carbon Building Management Base on Structural Equation Modeling
- Settlement of Cellulose Insulation
- The Interpretation of Norman Foster's Architectural Design Conception
- Airtightness and Acoustic Properties of Family House from Straw
- Cooling Effect of Waste Fiber Culture Medium Used as Extensive Green Roof
- Hygrothermal Behavior of Thermal Insulating Material Based on Technical Hemp and its Application in Construction
- Experimental Evidence on the Thermal Performance of Opaque Surfaces in Mediterranean Climate
- Experimental Study on Permeability Resistant and Pore Structure of High Content Mineral Admixtures of HPC
- Decorative Arts of Gates Detail Components in Chinese Traditional Architecture
- Properties of the Dry Masonry Mixtures with Hollow Ceramics Microspheres
- Development of Masonry Components Protected against Moisture
- Heat Insulation Research on Double-Skin of Architecture in Hot Summer Area
- Prediction Study of Capillary Rise Height on Unsaturated Soil
- Explore on Design Strategy of Green Materials on Building Based on Low-Carbon Background
- Experimental Study in Gangue Base-Course Mixture Materials for Pavement
- Analysis of Eco-Design Strategy of Public Buildings in Large Space
- Study on the Shear Strength Parameters under Different Freezing and Thawing Cycles of Soil Slope in China
- GIS-Based Quantitative Analysis for Mesostructure of Cohesive Soil Containing Calcareous Nodules
- The Current Situation, Opportunities and Challenges of Green Construction and Sustainable Development in Chinese Airports
- Reinforcement and Reconstruction of Rural Breeding Sheds
- Application of BIM Technology in Green Building Engineering Construction
- Gelation in Three-Phase Disperse Systems
- Experimental Study on Properties of Different Angles of FRP Shear Reinforced Timber Beams
- Case Study of Building Energy and Environment Management System on Campus: A Report from Southeast University
- Variable Density Cellular Concrete
- Study of Traditional Tibetan Architectural Material and Security
- The Fuzzy Cluster Analysis Research Methods for Surface Enhanced Materials Resistance to Wind Erosion
- Production of Partition Blocks from Synthetic Gypsum
- Use of Thermal Insulating Perlite Composite Materials Based on Geocement to Protect Technological Equipment
- Experimental Investigation on the Shrinkage and Creep Performance of Self-Compacting Lightweight Concrete
- Chapter 11: Engineering Thermophysics
- Numerical Study on Effect of Injection Rates on Combustion and Emission Performance
- Advances in Working Medium for Organic Rankine Cycle
- Study on Gas Turbine-Based CCHP System with Multi-Objective Evaluation Index
- Research and Application on the Dynamic Simulation of Natural Gas Pipeline
- Experimental Study on Combustion Reaction between Silicon and Nitrogen in Transport Bed
- Research on the Applications of Heat Pipes in Cooling Aircraft Electrical Equipment
- The Influence of Bluff-Body Structural Parameters and Incoming Velocities on Advanced Vortex Combustor
- Research Status and Development Prospect of Optical Fiber High-Temperature Sensors
- Forecast Research of Combustion Stability of Pulverized Coal
- Research on the Stress of the Oxide Scales on the Superheater Tubes under Uneven Circumferential Loading
- Chapter 12: Thermal Engineering
- Experimental Study on Rich Oxygen Gasification and Ash Character in Entrainedflow Coal Gasifier
- Experimental Research on the Effect of Cross-Wind to Wet-Cooling Tower Performance
- Heat Exchange Calculation of a Regenerative Air Heater with Numerical Simulation Method
- Study on Cost Allocation in Marine Diesel Engine Cogeneration System
- A Study of Multi-Objective Load Optimal Dispatch in Thermal Power Unit Based on Improved Particle Swarm Optimization Algorithm
- The Study of Medium/Low-Temperature Stirling Engine Power Output Characteristics
- Modification Research on the Tube Layout of One 300MW Unit Condenser
- Numerical Study on the Flow and Heat Transfer for the inside of the Cylinder Type Natural Gas Heater
- Numerical Simulation of Condenser Combining with Low-Pressure Exhaust Hood and Condenser Throat
- Conjugate Heat Transfer in Two Partial Enclosures Connected by Refrigerator/Heater
- Safety System Analysis on Gas-Steam Combined Cycle Power Plant
- Numerical Simulation and Optimization of the Flow Field in the SCR System
- The Influence of Dynamic Load on Ground Source Heat Pump System Performance
- The Numerical Analysis of Spiral Heat Exchanger
- Analysis on the Heat Transfer Performance of Jacketed Tube Heat Exchanger with Different Finned Array
- Analysis of Thermodynamic Performance in NH3/CO2 Cascade Refrigeration System
- Chapter 13: Fluid Engineering and Machinery
- Performance Testing of Pico Hydro Generator for Electricity Generating
- The Experimental and Numerical Study of the Stability of Ultra-High Pressure Water Jet
- Non-Deterministic CFD Simulations on the Effect of Uncertain Tip Clearance on an Axial Rotor Performance
- The Velocity Distribution for Ferromagnetic Fluids
- Application of Fruit Fly Optimization Algorithm-Least Square Support Vector Machine in Fault Diagnosis of Fans
- Badminton Performance Test of Wind Tunnel
- Hydraulic Turbine Blades Modeling Based on Two-Dimensional Wooden Patterns
- Study on BP Neural Network PID Control for Hydro-Viscous Drive System
- Numerical Simulation of Fluid-Structure Interaction with Water Hammer in a Vertical Penstock Subjected to High Water Head
- Study on Internal Flow Field of Series Pulsed Nozzle
- Numerical Investigation of Sediment-Laden Flow in a High-Head Francis Turbine Runner
- Experimental Study of the Vertical Hydraulic Drag Force on Regular Tetrahedron
- Experimental Investigation and Theoretical Analysis on Galloping of Iced Conductors
- Experimental Research on Pressure Loss of an Olivary Flowmeter
- Research on Francis Turbine Hydraulic Vibration by CFD
- Cause Research about Vibration and Noise Caused by Channel Vortices at High Load in Francis Turbine
- Analysis and Application of Radius Calculation Model for Boilover in Crude Oil Tank Fire
- The Fault Diagnose of Advanced Amphibious Assault Vehicle Fan Pump Based on Principal Component Regression
- Chapter 13: Fluid Engineering and Machinery
- Numerical Simulation of Internal Flow Field in Mixed Flow Fan
- A Meshless Method for Advection-Diffusion Problems
- Finite Element Analysis on Green Grinding Ti6Al4V Alloy with Inner-Lubricating Wheel
- Chapter 14: HVAC, Air Conditioning and Refrigeration
- Performance Study of the Household Air Conditioner under Extreme Climate Conditions
- A Central Air Conditioning System Design for Hotel in Guangzhou
- Multiple Models Fuzzy PID Controller Design in Air-Condition Temperature Control System
- Carbon Footprint Analysis and Environmental Impact Evaluation of Air Conditioning System
- A TRNSYS Component Modeling Method for a New Kind of Solution Dehumidifier
- Theoretical Analysis for the Influence of the Regenerative Process on the Trans-Critical CO2 Cycle
- Experimental Study on Performance of a Cross-Flow Dehumidifier
- Experimental Study on the Characteristics of Jet and Drop Formation Related to a Fluidization Method for Ice Slurry Production
- Energy Measurement Method for VRV Air Conditioning Systems in Existing Commercial Buildings: A Case Study from Southeast University
- The Analysis of the Feasibility of Summer Air Conditioning Cooling Using Shallow Surface Water in Zhejiang Province
- Indoor Thermal Environment Research of Air Conditioning Office with Air from Window Gap
- A Double-Layers Energy Efficiency Evaluation Method of Central Air-Conditioning System
- Design of Multi-Function Refrigerator with Refrigeration and Constant Temperature and Hot Water
- Study of an Atmospheric Freeze Drying Refrigeration System
- Effect of Ventilation Systems on Stator Thermal Field of Induction Machines
- Chapter 15: Power Machinery and Engineering
- The Performance of a Common Rail Diesel Engine Fueled with Different Blending Ratio of Biodiesels at Different Altitudes
- Risk Analysis and Evaluation of Power Plant Equipment
- Design of Bilateral Switched Reluctance Linear Generator to Convert Wave Energy: Case Study in Sicily
- Dynamic Crankshaft Strength Calculation of Diesel Engine Using Simulation Techniques
- EGR System Performance Optimization of Diesel Engine Based on GT-Power and Fluent Co-Simulation
- Development and Performance Evaluation of EGR System on Light Duty Vehicle
- Simulation Analysis and Evaluation of Inner Airflow Characteristics on the 2.0L Di Engine
- Research on Feed-Forward Controller for Electronic Throttle Control of GDI Engine Based on Nonlinear Model
- Analysis of Vehicle Dynamic Performance Based on MATLAB
- Numerical Simulation Study of the Influence of Structural Parameters of Combustion Chamber on In-Cylinder Flow Field of Diesel Engine
- Full Power Back-to-Back Test Platform for Large Scale Electrical-Excited Direct Driven Wind Turbine
- Investigation on the Match between the Nozzle Tip Penetration and the Double-Layers Diffluent Combustion Chamber Geometry
- Research on Transmission Principle of Gearless Reducer
- Diamond-Nickel Composite Plated Grinding Needle Used for Finish of Airflow Channel on the Gas Turbine Blade
- Researches on Electronic Control System of Diesel-CNG Dual Fuel Engine
- Motion Characteristics and Influence Factors of Piston Assembly in a Compression-Ignition Hydraulic Free-Piston Engine
- Effects of Ethanol-n butanol-diesel Oxygenated Fuel on Performance of Diesel Engine
- Effect of Steam Turbine Rotor Notch Fillet Radius on Stress and Deformation
- The Impact Analysis of Regenerative System in Turbine Modeling
- The Determination of Stagnant Rate of Servo System Based on Adaptive Chatter Algorithm
- The Research of the Jam Fault Features and Diagnostic Methods of the Slide Valve Oil Motive Based on DEH Data
- The Measuring Method of Static Delay Rate Based on the Frequency Step Disturbance
- An Independent Component Analysis Based on Sliding Window Statistics and its Application to Power Plant Equipment State Monitoring
- Research on Simulation of Urea-SCR Injection System for Marine Diesel Engine
- Rolling Bearing Fault Diagnosis Method Using Glowworm Swarm Optimization and Artificial Neural Network
- Labyrinth of High Parameter Valve Technology Application and Prospects in the Power Plant
- CFX Modeling of an Axial Turbine with Symmetrical Blades and Reversible Flow for Tidal Power Plants
- Synthesis, Physicochemical, and Tribological Characterization of Nano Lubricant Contained Cu Nanocolloid as Additive
- Chapter 16: Power System and Automation
- Security Pricing Model Based on Dynamical Security Region under Power Market Environments
- Research on Application of Synchronized Phasor Measurement Unit (PMU) for Smart Substation
- Fault Response of Inverter-Based Distributed Generators in Distribution Network
- Demand Response Based Household Electricity Intelligent Interactive Terminal Design
- Online Decision Support Index System Suite for Limiting Short Circuit Current
- Big Data Analytics-Based Energy-Consumption Feature Selection of Large Thermal Power Units
- Optimized Control of DC Voltage Based on BP Neural Network in Active Power Filter
- Smart Power Meter System Based on ZigBee
- The Comprehensive Efficiency Evaluation of Electrical Power System of China Based on Data Envelopment Analysis
- Study on Reliability Evaluation Method of Components without Enough Fault Data
- Power Quality Disturbances Classification Based on Modified S Transform and Decision Tree
- Research on TCSC and Active Power Filter Apply to Improve Power Grid Based on Matlab Analysis
- Comprehensive Assessment System and Method of Smart Distribution Grid
- Study on a Service Mechanism that Wind/Photovoltaic/Energy Storage Power Station Help Wind Farms Tracking Generation Schedule Curve
- Short-Circuit Current Criterion under Condition of Protection Action in Low Voltage Power Supply System
- The Interconnection Protection of the MV Multiple Microgrid
- Multi-Level Fault Diagnosis of Power Transformer Based on Fusion Technology
- A New Fast Method Used For Calculating Power Flow Based on ODE
- An Advanced Algorithm of Power Flow Calculation for Radial Distribution Networks
- Modeling Methods of Impact Load on PSASP
- The Trans-Provincial Peak Regulation Market Design
- Calculation of Short Circuit Current Based on Equipment Graphics Database
- Calculation Method Research about Theoretical Line Loss' Boundary of Distribution Network
- Branch-Current Algorithm Based Three-Phase State Estimation in Distribution System
- Improved Algorithm for Complex Distribution System Reliability and its Programming
- Test Method for Resistive Current of Arrester for Cable Line Based on Phase Search
- Development of Relay Device in Monitoring Data Management of Cable Circulation in Urban Power Grid
- Fault Location and Isolation Algorithm for Distribution Network with DGs
- The Grid Harmonic Amplification and Transmission Characteristics Research
- Probability Analysis Method of Power System Cascading Failures Caused by Extreme Hot Weather
- The Impedance Calculation Methods Using Damped Sinusoidal Signal
- Shunt Petersen-Coil with Resistor for Single Phase Fault Detection in Resonant Grounded Power Distribution Systems
- Realization of Economic Load Dispatch of the Electric Power System Based on Artificial Fish Swarm Algorithm
- An Optimal Automatic Generation Control Strategy for Interconnected Power Grid with Wind Power
- An Communication and Battery Performance Evaluation of the Demand Response and Battery Storage Coordination System Potential for Providing Microgrid Tie-Line Smoothing Services
- Study on Detection Method of Electrical Shock Current Based on Sliding Window and Wavelet Transform
- Economic Load Dispatch Using Bacterial Foraging Optimization Algorithm Based on Evolution Strategies
- Technology for Transformer Fault Diagnosis with Detection and Monitoring Data Fusion
- Based on Delay Compensation System for Shunt Active Power Filter Research
- A Kind of Equipment Fault Indicator Recognition Method
- Research on Monitoring System of Hydropower Substation Based on RFID Technology
- Analysis on Sub-Synchronous Damping Characteristic of VSC-HVDC
- The Application of Safety and Stability Control Device in Middle of Henan Power Grid
- An Adequacy Decision Model Incorporating Wind Power and Electric Energy Storage at the Distribution Level
- Fault Location Method Based on Wide-Area Voltage
- Imprecise Adequacy Assessment of Generating System Incorporating Wind Power Based on Interval Probability
- Review of Power System Analysis Methods Considering Correlation of Wind-Photovoltaic-Load
- Application of Real-Time Risk Assessment Method in Dispatching Operation
- Application of Improved Ant Colony Optimization on Economical Operation of Automatic Generation Control Units in Hydropower Station
- Reliability Evaluation & Analysis of UHVDC Transmission System
- Feasibility Boundary Evaluation Using Eigenproperties of Jacobi Matrix from the Power Flow Routine
- Low-Frequency Oscillations Identification in Interconnected Power System Using PMU
- Study on the Calculation of Power Grid Asset Utilization Index
- The Simulation Research of Partial Discharge Electromagnetic Wave Propagation Characteristics in GIS
- Technical Feasibility of Distributed Generation Network Connection
- Complex Urban Distribution Network Wiring Pattern Matching Research Related to the Load Density
- Chapter 17: High Voltage and Insulation Technology
- The Study of Insulator Influence to the Electromagnetic Wave Propagation in GIS
- Parameter Identification for Power Transformer Using Zooming Genetic Algorithms
- The Assessment of the Overload Capacity of Transformer Based on the Temperature Reverse Extrapolation Method
- Application of FTA and Improved FAHP in Power Transformer Risk Assessment
- Study of PD Ultrasonic Wave's Properties in Solid Medium
- Quantitative Analysis of Rogowski CT Frequency Characteristics
- Improved Algorithm on Wide Range Positioning for Partial Discharge in Substation
- The Research and Establishment of GIS Fault Simulation Test System
- The Study of the Partial Discharge Characteristics of Floating Potential Defects in GIS
- Influence Factor Study of Oscillating Impulse Voltage Generator
- Research of Discharge Characteristics of CO2 Gas in Small Distance
- A Study on Magnetism-Driven Gliding Arc Discharge
- Electric Field Calculation Software for Epoxy Resin Casting Dry-Type Transformer Based on the VB
- Chapter 18: Motor and Electric Equipment
- Marine Asynchronous Propulsion Motor Parameter Identification Using Dynamic Particle Swarm Optimization
- Study on Switch-On and Switch-Off Time of On-Line Monitoring for the Vacuum Circuit Breaker in Traction Substation
- Lissajous Curve of an Auxiliary Winding Voltage Park Components for Doubly-Fed Induction Machine Electrical Faults Diagnosis
- Research of a Hybrid Controllable Reactor
- Cotrolling Characteristic Analysis of Magnetically Controlled Shunt Reactor Based on Field-Circuit Coupled
- Simplified Model Reference Adaptive Method for Sensorless Vector Control of PMSM
- An Analytical Model for Leakage Effect in the Electrical Generator of Rim-Driven Marine Current Power System
- Researched on the Characteristics of Self-Excited Induction Generator
- The Analysis on the Effect of Ground Reflection in the Noise Test of Aircraft Engine
- Design and Calibration of Inductive Current Transformer
- Chapter 19: Electrical Theory and New Technology
- A Fault Diagnosis Method in VSC-HVDC Simulation System Based on BRBP Neural Networks
- Improving the Transfer Efficiency of a Wireless Energy Transfer System Using Multiple Coils
- A New Supercapacitors Fractional Order Nonlinear Model
- Characteristic Analysis of the Magnetic Field Induced by Ocean Waves and the Filtering Method in Marine Magnetic Survey
- Construction for True Three-Dimensional Imaging Display System and Analysis Based on State-Space Model
- Wide-Band Modeling of Grounding Grid Based on the Fractional Order Differential Theory
- Immunity Test of a Microcontroller by Using Transmission Line Pulse Generator
- Study on Partial Discharge of Electric Equipment Based on Ultraviolet Imaging Technology
- A Fractional Order Circuit Model of the PT
- Sensitivity Analysis of the Networks with Fractional Order Reactance
- Study on Distribution Model of Electric Field for 220 kV Transmission Lines and Implement
- Application of SENLAN SB60 in Flow Variable Frequency Speed Control System
- Chapter 20: Power Electronics and Power Drives
- Experimental Testing of Hydroinsulating Injection Screens
- Feedback Linearization Controller for MMC-HVDC System Connecting to Passive Networks
- Study on Fuzzy PI Control Strategies of Networked Control System
- Control of Grid-Side MMC for Wave Power Generation
- Design of Intelligent Greenhouse Control System Based on PSoC Platform
- Technique of Digital SPWM Inverter Based on PRE Control
- DCM Analysis of ZVS PWM Full-Bridge Converter with Current Doubler Rectifier
- Hardware Design for Simulating the Chaos in Electric Arc Furnace
- Design of Driving Circuit of Area Array CCD with Interline Transfer Based on FPGA
- A Novel Pulse Frequency Modulation Technique for DC/DC Converter
- Simulation and Research on the Improved Boost Circuit Based on Multisim
- Passivity Based Hybrid Controller of Dual Euler Lagrange Model of Three-Level Three-Phase Neutral Point Clamped Voltage Source Rectifier
- Chapter 20: Power Electronics and Power Drives
- Research on a Nonlinear Control Strategy for Three-Phase Voltage Sources PWM Rectifier with Resistive and Inductive Load
- Implementation and Design of Voltage-Mode PFM Control Buck Power Converter
- Quality Control Scheme Design on Remanufactured Engine Electronic Control Unit
- Design and Application of Power Active Filter Harmonic Extract Technology
- The Application of Phase Shift Control Technology in the Ultrasonic Power supply
- Modeling and Simulation of Pressure Control Logic Module in Pressurizer of Nuclear Power Plant
- Chapter 21: Smart Grid Technologies
- Study on Asynchronous Sampling in Digital Electrical Energy Metering Based on IEC61850
- Genetic Based Reinforcement Learning Load Control for Smart Grids
- Research on Heterogeneous Cloud Service Model for Smart Grid Business Application
- Modeling of Incentive Interruptible Load Contract for Practical Application
- Optimal Allocation of Different Types of DG Sources Considering the Impact on Power Losses and Voltage in Distribution Networks
- The Empirical Study of Demand-Side Response Model Based on the Maximize Benefits under the Background of Smart Power Grid
- The Effect Research of Smart Grid to Residential Users Intelligent Response Behavior
- The Study of Knowledge-Based Active Learning Grid Operation Experience
- Design of the Zigbee-Based Front-End Sub-System of a Smart Control System for Power Consuming Network
- Improved GSA-GA Algorithm Based Bad Data Detection, Identification and Correction for Power Grid
- Research of DC Micro-Grid Photovoltaic Energy Storage System Control Strategy
- A Simulation Framework for Grid-Consumer Interoperability
- Modeling and Simulation of Compressed Air Energy Storage (CAES) System for Electromechanical Transient Analysis of Power System
- Load Scheduling Strategies Based on Dynamic Price in Smart Grid
- High Precision Time Synchronization Algorithm for Smart Grid Based on Adaptive Filtering with Modified Particle Swarm Optimization
- Research on Key Indicators of Operational Warning System of Grid Enterprises Based on BSC-ISM Method
- Chapter 22: Power System Management
- Forecasting Residential Electricity Based on FOAGMNN
- Data Intergration of Power Information System Based on Ontology
- The Research of BP-PSO Optimization Method in Electric Power Market Analysis and Forecast
- Wind Power Output Prediction with BP Neural Network Combining Genetic Algorithms
- Reconfiguration of the Shipboard Power System Based on Particle Swarm Optimization with Non-Clique Topology
- 500kV Substation Service Power System Modeling Research Based on Least Square Method with Parameter Optimization by SPO
- The Application of Analytic Hierarchy Process (AHP) in the Power Grid Planning
- Fuzzy Comprehensive Assessment of Urban Underground Power Cable Infrastructure Safety Risk
- The Optimization of Interruptible Load Based on the Minimum Network Loss
- Study on Rush-Repair Scheme for Distribution Network Fault
- A Novel Prediction Method for Electric Power Demand Based on Markov Chain Model with a Fuzzy Probability
- A Study on Locational Marginal Prices Based on Single-Stage and Multi-Stage Optimization Models
- A Power Quality Study of Metro Transit Railway Based on Field Measurement
- Framework Design of Provincial Electric Power Company Operation Monitoring and Decision-Making Simulation
- Electric Power Informatization of China: A Review
- The Research of Optimization Method of Distribution Maintenance
- Research of the Power Control for a MCFC/GT Hybrid System
- Impact of Coal-Electricity Integration on Chinas Power Grid Development Strategy
- Robust Optimization of Steam Power System
- Short Term Load Forecasting Based on Improved RBF Neural Network
- Risk Decision Analysis on the Electricity Transaction of Power Enterprises in Electricity and Derivative Transactions
- Study on the Management Model of Pumped Storage Power Station
- Research on Analysis and Evaluation System of Power Grid Enterprises Asset Quality
- Chapter 23: Product Design and Manufacturing Automation
- Design of a New Micro Single Flute Drill
- 3D Remodeling of Molds Broken Area Based on Reverse Engineering
- Research and Development of Measurement System for Control Circuit Board of Residual Current Fire Monitoring Detector
- Dynamics Simulation Research of Planar Four-Bar Mechanism with Multi-Joint Clearance
- Design about Automatic Vehicles Following System for Field Vibrator Motorcade
- Ergonomics in Universal Design
- Multi-Objective Optimization of Manufacturing Workshop Layout Based on Improved Genetic Algorithm
- Digital Model Research on and Design of Large Plate Column
- Structure Design of Inner Lubricating Wheel with Vane Impeller Base on Green Grinding
- The Research of Moulds Digital Repairing Based on Laser Cladding
- Variable Speed Control and Programming of Stepper Motor in Numerical Control System
- Dynamic Process of Quality Abnormal Pattern Recognition Based on PCA-SVM
- The Technological Study about Cutting Stainless Substrate by Nd:YAG Laser
- Integration of the Local Wisdom of Natural-Dyed Mud-Treated Silk in Thailand for Creative Economy
- A Model of Adhesive Contact between a Spherical Tip and a Flat Surface
- Optimize Design on the Key Parts of Ring Die Fuel Pellet Machine
- Chapter 24: Precision Automation
- Meta-Consensus: Consensus as a Fundamental Concept on Swarm System Dynamics and Formation Control
- Dynamic Performance Simulation Analysis and Experimental Research of Ball Cage Patterned Constant Speed Universal Joint Based on Workbench
- A Novel Method of Measuring Gap and Surface Differential Used in Headlights Contour Detection
- On Solutions of Inverse Problem for Hermitian Generalized Hamiltonian Matrices
- Shift Control Strategy of Three-Parameter for AMT
- Study on a Pneumatic Artificial Muscle Actuator
- Chapter 25: Application of Computer and Information Technology in Industry
- Research of Multi-Sensor Information Fusion Fire Detection System
- The Research of Malicious Code's Spread and Found Technology
- The SIP Security Communication Base on Improved Key Agreement Algorithm
- Research of Botnet Base on P2P Protocol
- Family Health Telemonitoring System Based on WSN
- A Multi-Objective Optimization Method for System Reliability Allocation
- Distributed Remote Monitoring System Key Technology Research on Agent
- Comparison of Thresholding and Edge Detection Segmentation Techniques
- Parking Guidance System Based on RFID
- The Design of a Wavelet-Based Neural Network Adaptive Filter
- Improving Chemistry Supply Chain with Business Intelligence Architecture Updates
- An Improved Fast Normalized Cross Correlation Algorithm
- Real-Time Acquisition System of Multi-Channel Signal Based on PCI
- On Boundedness of Random Solutions of Perturbed Stochastic Discrete Systems
- Dynamic Joint Decision on Price and Delivery Date in MTO Manufacturer Based on Agent
- Research of Location Technology Based on Wireless Sensor Network
- Construction Materials Management System Design Based on Barcode
- Periodic Solutions for Nonlinear Evolution Equations in RN
- Research on Unified Storage Format for Building Information Modeling
- System for Measuring the Burst Point Time Base on APD
- Design of Intellectualized Monitoring Module Based on CAN Fieldbus for Air Pipeline of Marine
- Image Fusion Algorithm Based on Wavelet Transform and Laplacian Pyramid
- The Hardware Design and Implementation of Liquid Level Detection System for Lead-Acid Battery
- Research on Image Fusion Based on Pyramid Decomposition
- Medical Image Edge Detection Analysis Method Based on Fractional Differential
- Devaluation Modelling for Residantial Buildings
- An Algorithm to Extract the Contour of Region with Visual C++
- Application of Improved BP Neural Network in Threshold Selection for Image Processing
- Based on Wireless Sensing Network Electronic Car License System Design and Research
- Design of Multiple Hetegenous Protocols Conversion of Home Gateway Based on Task Description
- Research on Edge Detection Technology
- Research on Threshold Segmentation Algorithms
- License Plate Recognition Based on Neural Network Algorithm to Improve Research
- The Research on Cloud Manufacturing Service Discovery Strategy Based on Mapping Reuse
- The Design of Patrol System Based on Image Acquisition
- The Environmental Information Monitoring Network Set up Based on Service Discovery Mechanism
- A Fractional-order Sobel Operator for Medical Image Structure Feature Extraction
- Topic Detection and Tracking Method for Tibetan Network
- Study on Pulse-Signal Detection Methods Using Wavelet Transform and Hilbert Huang Transform
- Pitch Perception of Medium-Rank Harmonic Complex Tones Based on Temporal Analysis
- The Application Research on Logistics of Dangerous Chemical Cargoes Based on the Technology of Internet of Things
- Two-Stage Local Polynomial Regression Method for Image Heteroscedastic Noise Removal
- Triple Wronskian Representation of the Multi-Soliton Solutions for a Coupled GMNLS Equations
- Technology of Image Compression Coding Based on Walsh Transform
- Semantic Analysis Investigation of Data Mining Technology in Network Forum
- Research on Intelligent Regulation of Ship-to-Ship Crude Oil Transfer at Sea Based on Internet of Things
- The Factors that Influence the Intelligence Utilization of College Students Serving in Rural Areas-Based on the Investigation of the Needs of College Students in Wuhan Province
- The Limitation of Free Float and Safety Float and the Introduction of Composite Free Float and Composite Safety Float in CPM Network
- Contact Stress Analysis of Packer Rubber Based on ANSYS Software
- Reliability Analysis of Suspension Bridge Using Gaussian Process Based Response Surface Method
- Aeolian Vibration Analysis of Different Node Connectivity Steel Rods
- Chapter 26: Engineering Education
- The Developmental Research of HeBei Province High Level Innovative and Creative Talents on the Cooperative Development of Beijing, Tianjin and HeBei Province
- The Niche Vision of the Development of Higher Education for the Deaf in China
- The Research on the Teaching Model of Operations Research
- A Thought on Improving the Training System to Enhance the Postdoctoral Innovation Capability
- Research of the Effect Factors of College Graduates' Employability Based on the Perspective of Education
- The Configuration of Scientific and Technical Personnel Entrepreneurial Intention Model Based on Theory of Planned Behavior
- Post Bifurcations of the Concept of the Sustainable Development in Construction Business and Education
- Oral English Teaching Context Construction Based on New Media Environment
- Research on Application of the Internet of Things in University's Teaching Management
- Data Envelopment Analysis (DEA) in the Education Expenditure Performance Evaluation
- An Exploration of the Holiday Independent Practice of College Nursing Students
- Chapter 27: Project Management and Engineering Management
- The Introduction and the Calculation of Virtual Expense Ratio in Decision Critical Path Method (DCPM)
- A Proposal to Leverage Improvements on Integrated Management Systems Applying Zachmans Corporative Architecture
- A Study of PCI Model in Construction Quality Control
- Research on the Contribution Degree of China’s Auto Industry
- Study on the Engineering Project Tender Offer Game Type
- Research on Innovative Performance Model of the Productive Service Industry Cluster Based on the Process of Network Innovation
- Formulation and Research of Multi-Region Fire-Fighting and Rescue Operation Circle for Large Oil Strategic Reserves
- The Limitation of Free Float and the Introduction of Composite Free Float in CPM Network
- The Master Production Scheduling Model for Buyer and Vendor Based on Bargaining Game
- A Decision Model to Estimate Contingency Budget for Complex Equipment Development Projects
- The Struture Model and Empirical for the Satellite Navigation Engineering Project Risk Management
- Research on the Influence Factor of the Value Chain Analysis by ICA
- Steelmaking-Hot Rolling Scheduling Model and Method for Integrated Management in Iron and Steel Enterprises
- Research on Intellectual Property Information Audit Based on Independent Innovation
- Research on Supervision Current Situation and Countermeasures of Agricultural Modernization in China
- Jointed Pricing Decision of Brick-and-Click Retailers under Uncertain Demand
- Analysis on Agricultural Mechanization Sustainable Development in China
- Prediction of Landfill Gas Production of Municipal Solid Waste and Energy Utilization Analysis
- Transportation Safety Countermeasure Analysis on Cold-Chain Logistics of Fresh Agricultural Products
- Feasibility Analysis of Mechanized Upland Rice Cultivation in Mountainous Area
Les mer
Produktdetaljer
ISBN
9783037859728
Publisert
2014-03-12
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
6200 gr
Høyde
240 mm
Bredde
170 mm
Dybde
167 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
3330