/

Corrosion Protection at the Nanoscale

Nguyen, Tuan Anh
Heftet / 2020 / Engelsk

Produktdetaljer

ISBN
9780128193594
Publisert
2020-03-12
Utgiver
Vendor
Elsevier Science Publishing Co Inc
Vekt
1090 gr
Høyde
235 mm
Bredde
191 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
540

Redaktør
Nguyen, Tuan Anh

Om bidragsyterne

Susai Rajendran is Research Director, Professor of Chemistry St. Antony’s College of Arts and Sciences For Women, India. His research is in the field of corrosion science and engineering, nanotechnology, applications of nanomaterials in corrosion protection study, and environmental studies. Saeid Kakooei is Senior Lecturer at Mechanical Engineering Department, Universiti Teknologi Petronas, Malaysia. His research focuses in the areas of corrosion and failure analysis Is a Assistant Professor in research scientist at the Department of Materials Science and Engineering, Faculty of Engineering, Shahid Chamran University of Ahvaz, Iran. His research is in the area of ,smart corrosion inhibitors for nanocarriers is Professor and Head of the Anhui Key Laboratory of Chemo/Biosensing, College of Chemistry and Materials Science, Anhui Normal University, China. His research focuses in the synthesis and catalysis of nanocomposites. Tuan Anh Nguyen is Principal Research Scientist at the Institute for Tropical Technology, Vietnam Academy of Science and Technology, Hanoi, Vietnam. His research focuses on advanced nanomaterials and nanotechnology for corrosion and materials integrity in transportation systems. His research activities include smart coatings, conducting polymers, corrosion and protection of metals/concrete, antibacterial materials, and advanced nanomaterials.

Corrosion Protection at the Nanoscale

Nguyen, Tuan Anh
Heftet / 2020 / Engelsk
Nguyen, Tuan Anh
Heftet / 2020 / Engelsk
Nettpris:
2.790,-
Levering 7-20 dager
Sjekk lagerstatus i butikk
Corrosion Protection at the Nanoscale explores fundamental concepts on how metals can be protected at the nanoscale by using both nanomaterials-based solutions, including nanoalloys, noninhibitors and nanocoatings. It is an important reference resource for both materials scientists and engineers wanting to find ways to create an efficient corrosion prevention strategy. Nanostructure materials have been widely used in many products, such as print electronics, contact, interconnection, implant, nanosensors and display units to lessen the impact of corrosion. Traditional methods for protection of metals include various techniques, such as coatings, inhibitors, electrochemical methods (anodic and cathodic protections), metallurgical design are covered in this book. Nanomaterials-based protective methods can offer many advantages over their traditional counterparts, such as protection for early-stage, higher corrosion resistance, better corrosion control. This book also outlines these advantages and discusses the challenges of implementing nanomaterials as corrosion protection agents on a wide scale.
Les mer
PART 1: CORROSION AND PROTECTION AT NANOSCALE 1. Corrosion protection at nanoscale: An introduction 2. Mathematical modelling and simulation of corrosion at nanoscale: 3. Nanostructured metals and alloys with low melting point 4. Nanocontainer loaded with pH indicator phenolphthalein for corrosion sensing application 5. Methods for testing and measurement of metal corrosion at nanoscale 6. Methods for fabrication of nanocoatings PART 2: PROTECTION OF METAL USING NANOSTRUCTURED ALLOYS 7. Corrosion resistance of nanostructured metals and alloys 8. Nanostructured alloys: Preparation, characterization and anticorrosion property 9. Iron based nanostructured alloys 10. Nickel based bimetallic nanostructured alloys 11. Current industrial application and future perspectives PART 3: PROTECTION OF METAL USING NANOINHIBITORS 12. Metal/metal oxide nanoparticles as corrosion inhibitors 13. Corrosion inhibitor loaded smart nanocontainers 14. pH-responsive controlled release of corrosion inhibitor from nanocarriers (nanocapsules) 15. Current industrial application and future perspectives PART 4: PROTECTION OF METAL USING NANOCOATINGS 16. Nanocoatings for anticorrosion:  An introduction 17. Polymeric nanocomposite coatings 18. Metallic nanocomposite coatings 19. Ceramic nanocomposite coatings 20. Current industrial application and future perspectives PART 5: ELECTROCHEMICAL CATHODIC PROTECTION USING NANOGENERATORS 21. (Numerical) Nanoscale simulation of cathodic protection 22. Electrochemical cathodic protection powered by triboelectric nanogenerator 23. Self-powered cathodic protection based on the hybrid nanogenerators (by simultaneously harvesting thermal and mechanical energies) 24. Current industrial application and future perspectives PART 6: CONCLUSIONS AND FUTURE PERSPECTIVES 25. Current industrial scale up application 26. Future scope
Les mer
Explores fundamental concepts and how metals can be protected at the nanoscale by using nanotechnology and nanomaterials
Explains the main methods of detection, monitoring, testing, measurement and simulation of corrosion at the nanoscale Explores how metals can be protected at the nanoscale using nanotechnology and nanomaterials Discusses the major challenges of detecting and preventing corrosion at the nanoscale
Les mer

Relaterte produkter

Corrosion Protection at the Nanoscale explores fundamental concepts on how metals can be protected at the nanoscale by using both nanomaterials-based solutions, including nanoalloys, noninhibitors and nanocoatings. It is an important reference resource for both materials scientists and engineers wanting to find ways to create an efficient corrosion prevention strategy. Nanostructure materials have been widely used in many products, such as print electronics, contact, interconnection, implant, nanosensors and display units to lessen the impact of corrosion. Traditional methods for protection of metals include various techniques, such as coatings, inhibitors, electrochemical methods (anodic and cathodic protections), metallurgical design are covered in this book. Nanomaterials-based protective methods can offer many advantages over their traditional counterparts, such as protection for early-stage, higher corrosion resistance, better corrosion control. This book also outlines these advantages and discusses the challenges of implementing nanomaterials as corrosion protection agents on a wide scale.
Les mer
PART 1: CORROSION AND PROTECTION AT NANOSCALE 1. Corrosion protection at nanoscale: An introduction 2. Mathematical modelling and simulation of corrosion at nanoscale: 3. Nanostructured metals and alloys with low melting point 4. Nanocontainer loaded with pH indicator phenolphthalein for corrosion sensing application 5. Methods for testing and measurement of metal corrosion at nanoscale 6. Methods for fabrication of nanocoatings PART 2: PROTECTION OF METAL USING NANOSTRUCTURED ALLOYS 7. Corrosion resistance of nanostructured metals and alloys 8. Nanostructured alloys: Preparation, characterization and anticorrosion property 9. Iron based nanostructured alloys 10. Nickel based bimetallic nanostructured alloys 11. Current industrial application and future perspectives PART 3: PROTECTION OF METAL USING NANOINHIBITORS 12. Metal/metal oxide nanoparticles as corrosion inhibitors 13. Corrosion inhibitor loaded smart nanocontainers 14. pH-responsive controlled release of corrosion inhibitor from nanocarriers (nanocapsules) 15. Current industrial application and future perspectives PART 4: PROTECTION OF METAL USING NANOCOATINGS 16. Nanocoatings for anticorrosion:  An introduction 17. Polymeric nanocomposite coatings 18. Metallic nanocomposite coatings 19. Ceramic nanocomposite coatings 20. Current industrial application and future perspectives PART 5: ELECTROCHEMICAL CATHODIC PROTECTION USING NANOGENERATORS 21. (Numerical) Nanoscale simulation of cathodic protection 22. Electrochemical cathodic protection powered by triboelectric nanogenerator 23. Self-powered cathodic protection based on the hybrid nanogenerators (by simultaneously harvesting thermal and mechanical energies) 24. Current industrial application and future perspectives PART 6: CONCLUSIONS AND FUTURE PERSPECTIVES 25. Current industrial scale up application 26. Future scope
Les mer
Explores fundamental concepts and how metals can be protected at the nanoscale by using nanotechnology and nanomaterials
Explains the main methods of detection, monitoring, testing, measurement and simulation of corrosion at the nanoscale Explores how metals can be protected at the nanoscale using nanotechnology and nanomaterials Discusses the major challenges of detecting and preventing corrosion at the nanoscale
Les mer

Produktdetaljer

ISBN
9780128193594
Publisert
2020-03-12
Utgiver
Vendor
Elsevier Science Publishing Co Inc
Vekt
1090 gr
Høyde
235 mm
Bredde
191 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
540

Redaktør
Nguyen, Tuan Anh

Om bidragsyterne

Susai Rajendran is Research Director, Professor of Chemistry St. Antony’s College of Arts and Sciences For Women, India. His research is in the field of corrosion science and engineering, nanotechnology, applications of nanomaterials in corrosion protection study, and environmental studies. Saeid Kakooei is Senior Lecturer at Mechanical Engineering Department, Universiti Teknologi Petronas, Malaysia. His research focuses in the areas of corrosion and failure analysis Is a Assistant Professor in research scientist at the Department of Materials Science and Engineering, Faculty of Engineering, Shahid Chamran University of Ahvaz, Iran. His research is in the area of ,smart corrosion inhibitors for nanocarriers is Professor and Head of the Anhui Key Laboratory of Chemo/Biosensing, College of Chemistry and Materials Science, Anhui Normal University, China. His research focuses in the synthesis and catalysis of nanocomposites. Tuan Anh Nguyen is Principal Research Scientist at the Institute for Tropical Technology, Vietnam Academy of Science and Technology, Hanoi, Vietnam. His research focuses on advanced nanomaterials and nanotechnology for corrosion and materials integrity in transportation systems. His research activities include smart coatings, conducting polymers, corrosion and protection of metals/concrete, antibacterial materials, and advanced nanomaterials.

Relaterte produkter