Preface, CommitteesWaste Diatomaceous Earth as Cementitious Binder ConstituentUsing of Untreated Carbon Nanotubes in Cement CompositionsElimination of Negative Influence of Fluidized Bed Combustion Fly Ash on Viscosity of Cement MixRheological and Calorimetric Characterization of the Role of CaCl2 on Portland Cement Early HydrationStudy of the Effect of Diatomite as a Partial Replacement of Cement in Cement PastesTechnological Properties Testing of Blended Portland Cements with Fluidized Filter AshEffect of Used Binders in Lightweight Plaster Mixtures on their Thermal Insulation PropertiesEffect of Curing Regime on the Properties of Alkali-Activated Slag/Limestone Mortar Subjected to High TemperaturesHydrothermal Synthesis of Tobermorite at 170 and 190 °C from Fly Ash and Quartz SandTesting of Possible Use of Fine-Grained Alkali Activated Composites in the Construction IndustryMechanical Properties of Alkali-Activated Material with Waste Aggregate According to PorosityInfluence of Aluminous Cement on the Hardening Rate of Cement-Based Stucco MortarsUtilization of Nanofibers in Sintered Ceramic Body Based on Calcium Aluminous CementEffect of Polymer Admixtures on Metakaolin-Based GeopolymerMolar Ratio and Polymer Modification Influence to Water Glass Coatings Matrix Basic PropertiesUtilization of Inorganic Binders for the Mineralization of Natural FibersInitial Analysis for Study of Pure Limestone DecarbonationThe Development of Coating Systems Based on Alkali Activated Slag for Protecting Reinforced Concrete StructuresSulfate Resistance of Alkali Activated CementsComparison of Selected Properties of Portland Cement Based Materials and Alkali Activated Materials Based on Granulated Blast Furnace SlagThe Development of Materials Based on Alkali-Activated Fly Ash Designed for Special ApplicationsPossibilities of Using Recycled Concrete and Silica Binders for Development of Sound Absorbing ConcreteStudy of Ettringite by Hydration of Yeelimite ClinkerImpact of Plasticizers on Technological Properties of GypsumInfluence of Fibre Type and Fibre Volume Fraction on Dynamic Properties of Slurry Infiltrated Fibre ConcreteUse of Fluidized Bed Combustion Fly Ash as Addition Reducing Shrinkage of ConcreteIce Formation as an Indicator of Frost-Resistance on the Concrete Containing Slag Cement in Conditions of Freezing and ThawingExperimental Tests of Water Vapour Permeability of PlastersEvaluation of Thermal Properties of Early-Age Concrete Containing Fly AshAssessment of the Aggregate in Historical PlastersWaste from Biomass Combustion - Lightweight AggregateUtilization of Waste Glass in Polymer ConcreteThe Effect of Modifications on Humidity Parameters of Cement MortarSelected Factors Determining Appearing of Efflorescences on Facial WallsFailure of Concrete at High Temperatures - The Influence of the Type of CementEnergy Remediation Combining Insulation Materials Based on Calcium Silicate and Expanded PolymersUtilization of Fly Ash in High Performance Floor Screed Based on Cement and its Influence on Physical Mechanical PropertiesEffect of Combination of Admixture on the Development of Selected Properties of Concrete and their ComparisonImpact of Polysiloxanes of Various Chemical Structure on Water Vapour Permeability in Silicone Plasters Used in Building RenovationMoisture-Related Problems of Historic Concrete StructureCement Based Heat-Insulating Materials for Use in Floor ConstructionsTesting of Technological Properties of Foam ConcretePossibilities of Sludge from Physico-Chemical Treatment and Recovery Solidification with the Use of Sorbents and CementBehaviour of Composites Based on Blended Matrix with CNT during Extreme TemperaturesThe Research of the Waste Sludge with the Content of Hazardous Substances Solidification Using Cement MatrixOptimization of Concrete with High Volume of Fly AshPossibilities of Binding Recycled Glass in Production of Advanced Building MaterialsIdentification of Thermal Characteristics of Selected Refractory Composites under High Temperature