Produktdetaljer
ISBN
9783038353966
Publisert
2015-05-19
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1570 gr
Høyde
240 mm
Bredde
170 mm
Dybde
39 mm
Aldersnivå
P, UP, 06, 05
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
772
Collection of selected, peer reviewed papers from the Chinese Materials Congress 2014 (CMC 2014), July 4-7, 2014, Chengdu, China.
The 118 papers are grouped as follows:
Symposium S: Materials for Mechanical Engineering and Processing Technology
Les mer
<p>Selected, peer reviewed papers from the Chinese Materials Congress 2014 (CMC 2014), July 4-7, 2014, Chengdu, China</p>
- Preface
- Symposium S: Materials for Mechanical Engineering and Processing Technology
- Study on Composite Interface of 4045/3003 by Cladding Casting
- Effects of Hardening Models on CUO Forming and Springback Simulation of High Strength Line Pipes
- A Phase-Field Model for Rapid Solidification with Non-Equilibrium Solute Diffusion
- Hot Tearing Evaluation and Contraction Behaviors of Four AA7xxx Alloys
- Investigation of Tungsten/Steel Brazing Using Nb Interlayer
- High-Strain-Rate Response of a Specially-Made Copper Sample
- Al-Si Alloy Foam Prepared by Two Step Foaming Method
- Application Research of a New Coupling Stirring on DC Casting Process for Large-Sized Aluminum Ingots
- High Temperature High Strain-Rate Tensile and Compressive Deformation Behaviors of Cu-Zn-Sn-Al Alloy
- Effect of Squeeze Casting and Solution Treatment on the Microstructure and Properties of ZA27 Worm Wheel
- Oxidation-Induced Cu Coating on Steel Surface
- Superhydrophobic Surface Prepared by Organic-Inorganic Hybrid Material on Plasma Spraying Al2O3+13wt. %TiO2 Ceramic Coating
- Effect of Fe Content on Microstructures and Mechanical Properties of the Heat-Treated Squeeze Cast Al-5.0Cu-0.6Mn Alloy
- Effect of Double Shot Peening on Room-Temperature Notched Fatigue Property of TC4 Titanium Alloy
- Research and Preparation of Silver Free Amorphous Active Brazing Alloy
- Effect of Pulse Current on the Microstructure of Tungsten Electrode in Tensile Process
- Effect of Alloying Elements and Heating Parameters on the Hardness of Quenched and Tempered Steel 42CrMo after Induction Hardening
- Network Carbide Inheritance during Heat Treatment Process of Large Shield Machine Bearing Steel GCr15SiMn
- Effect of Niobium Additions on Austenite Grain Coarsening Behavior of GCr15 Bearing Steel
- Effect of Alloying Elements on Mechanical Properties of Al-Si-Cu-Mg Cast Alloys
- Surface Decarburization Behavior of Spring Steel 60Si2MnA under AC1 Temperature and in Temperature Range AC3-G
- Thermal Stability of Microstructure and Mechanical Properties of NbNhard Films
- Effect of Nitrogen Content on Mechanical and Tribological Properties of HfCxNy Films Deposited by Reactive Magnetron Sputtering
- Effect of Cu Content on the Formability and Portevin-Le Chatelier Effect of Al-Mg Alloys
- Influence of Air Heat Treatment on Bonding Strength and Microstructure of Al2O3-13wt%TiO2/NiCrAl Coating
- Review of Research Progress of Prestressed Treatment to the Thick-Walled Cylindrical Parts
- Effect of Reheating Process on Microstructure and Mechanical Property of A390 Aluminum Alloy
- Influence of Materials Ratio on the Hydration Process of Magnesium Oxychloride Cement
- Characterization of Solution Treatment on AA7A55 Alloy
- Effects of Rare Earth on Microstructure and Mechanical Properties of Al-3.2Mg Alloy
- Analysis on the Influencing Factors of Heat Transfer for the Slot Nozzle Convection Impact in Rolled Strip Preposition Ultra-Fast Cooling
- Adsorption Behavior of Thiadiazole as Corrosion Inhibitors on Copper Surface
- Effect of Post-Welded Heat Treatments on Microstructure and Mechanical Properties of Friction Stir Welded Joints of 7A04-O Aluminum Alloy
- Study on the Lubricating Performance of Nano-TiO2 in Water-Based Cold Rolling Fluid
- Investigation on the Corrosion Behavior of Emulsion on the Cold-Rolled Silicon Steel Surface
- Effect of Heat Treatment Processing Parameters on the Microstructure and Properties of Low-Carbon Cr-Ni-Mo Carburizing Bearing Steels
- Research on Microstructure and Properties of Base Metal and Weld of Electron Beam Welding 0.30C-Cr-W Steel
- Microstructure and Tensile Deformation Behavior of a Hot-Rolled Directly Quenched and Dynamically Partitioned Steel Containing Proeutectoid Ferrite
- Influence of Fly Ash on Magnesium Oxychloride Cement Deformation
- Microstructures and Mechanical Properties of High Strength Low Carbon Bainitic Steel
- Recovery and Recrystallization Behavior of Large Sized β Phase Grains in TC18 Titanium Alloy during Annealing Process
- Study on Continuous Annealing Process for Ultrathin Cold-Rolled SPCC Steel
- Research on a New Type of Martensite Stainless Steel Electrode Used for Hardfacing
- Research on the Microstructure and Microhardness of 9Cr18 Semi-Solid Billet
- Effect of Annealing Temperature on Microstructures and Mechanical Properties of 1000MPa Grade Cold Rolling High-Strength Steel on Ultra-Fast Cooling Condition
- Research on Fluctuations in Work Hardening Rate of a Fe-Mn-Al-C Steel
- Microstructures and Properties of Low-Density High Strength-Toughness Fe-18Mn-9.5Al-0.65C Steel
- Dendritic Growth Characteristics of Cu-Rich Zone within Phase Separated Fe50Cu50 Alloy
- Effect of Ti Element on Microstructure and Properties of Cu-Cr Alloy
- Influence of the Weld Heat Input on the Electrochemical Behavior of the 921A High Strength Steel Welding Joints
- Effect of Solute Atoms on the Thermal Property of Mg Alloys
- Phase Selection in Sub-Rapidly Solidified Au-20Sn Alloys
- Effect of Al-5Ti-1B Grain Refiner on Microstructure and Mechanical Properties of 7075 Aluminum Alloy
- Study on A-TIG Welding Technology for 12 mm Thick 304 Stainless Steel Plate
- Study on the Laser Precision Cutting System and Stainless Steel Microporous Cutting Technology
- Development and Application of Tungsten Electrode Materials
- Solidification Structure of 6063 Alloy under Pulsed Magnetic Field
- Effect of Multi-Forging Condition on Deformed Structure and Mechanical Properties of A 99.995 Percent High Purity Aluminum
- Hot Tensile Deformation Behaviors of an AISI 316LN Stainless Steel
- Comparison Study on Friction-Welded Cu-Al Material and Pure Cu/Al
- Si Purity Control and Separation from Solidification of Al–30Si Melt under Pulse Electromagnetic Field
- Influence of Work Media on Surface Property of Compacted Graphite Cast Iron Processed by Laser Local Processing
- Effect of Pulse Current on the Plastic Deformation Behavior of Tungsten
- Optimizing Homogenization Heat Treatment of Al-Zn-Mg-Cu-Zr-0.15Er Alloy
- Arrhenius-Type Constitutive Model for 316LN Stainless Steel during Hot Deformation
- Grain Refinement of Pure Al by Inoculation and Rotating Magnetic Field
- Development of Hot Rolled Strips for Internal Plates of Automobile
- Microstructure and High-Temperature Oxidation of Ni-Si3N4 Composite Coatings by Pulse Electrodeposition
- Fe-Simulation of Hot Continuous Rolling of 40Cr Alloy Steel Round Bar and Roll Pass Design
- Modeling and Simulation of Influence of Solidification Velocity on the Structure of Porous Copper and Aluminum
- Microstructure and Mechanical Properties of TRIP-Aided Steels with Different Heat Treatments
- Dynamic Recrystallization Behavior of a New Lead-Free Machinable Brass during Hot Deformation
- Microstructure, Corrosion and Wear Resistance of Co-Ni-ZrO2 Composite Coating
- Effect of Ausforming Temperature on Bainite Transformation of High Carbon Low Alloy Steel
- Influence of Magnetic Field on the Microstructure and Properties of Cu-Ag-Zr Alloy
- TiN/AlN Nano Multilayers Film Fabricated by Plasma Enhanced Atomic Layer Deposition
- Heat Treatment of 10Cr12Ni3Mo2VN Blade Steel for Ultra Supercritical Unit
- Influence of SiC Content and Heat Treatment on the Corrosion Resis-Tance and Oxidation Resistance of Ni-P-SiC Composite Coating
- Effect of Sample Size on Microstructure and Mechanical Properties of OFHC Copper Processed by Equal Channel Angular Pressing
- Effects of Heat Treatment on Mechanical Properties of Ni-P-CNT Composite Coating
- Splitting Property Analysis of Automotive Con-Rod Steel C70S6
- Manufacture of Aluminum Foam without Thickening Agent via Melt Foaming Method and its Compressive Behavior
- An Advanced Metal Deposition Technique-Kinetic Metallization
- Influence of Strain Rate on Recrystallization Behavior of High Purity Aluminum by Tube High-Pressure Shearing
- Robust Design of UOE Forming Process Based on Support Vector Machine
- Extrusion Simulation and Texture Study on Mg-Y Alloy
- Simulation of the Extrusion Texture of Magnesium Alloy AZ31 Using Crystal Plasticity Finite Element Method
- Influence of Electromagnetic Force on Solidification of Cu-Cr-Zr Alloy
- The Extrusion Cracks of Inconel 625 Superalloy Tubes Caused by the Primary MC Carbides
- Differential Scanning Calorimetry Studies on Ni-Ni3B Alloys
- Effect of Mo on Transformation, Microstructure and Property of Hot-Rolled DP600 Steel
- Influence of FeCrAl Coating Arc Sprayed on Aluminum Corrosion Resistance of H13 Steel
- Wear Resistance of Cu10Al5Fe5Ni Alloy
- Precipitation Process and Mechanical Properties of an Elastic Cu-Ni-Mn Alloy
- Effects of Additives on the Properties of SiO2-B2O3-Al2O3-Na2O-PbO System Glass Powders
- Effect of Porosity on Mechanical Properties of Ti-5Al-2.5Sn ELI Alloy from Atomized Powder
- Electro-Less Ni-P Plating Coating of In Situ TiCp/Al-4.5wt.%Cu Vomposites
- Microstructure Evolution at the Diffusion Bonding Interface of High Nb Containing TiAl Alloy
- Effect of Container on the Microstructure and Properties of Powder Metallurgy TiAl Alloys
- Simulation of Container Design for Powder Metallurgy Titanium Components through Hot-Isostatic-Pressing
- Preparation and Properties of Ti-47Al-2Cr-2Nb-0.15B Alloy by Powder Metallurgy Route
- Mg Alloy Foam Fabrication via Powder Metallurgy and its Compressive Behavior
- Deformation-Induced Solid-State Amorphization in a Nanostructured Al-Mg Alloy Processed by High Pressure Torsion
- Structural and Crystallization Characteristics of Cu-Based Metallic Glass Powders Produced by Gas Atomization
- Study of Bonding Technology and Property of Foam-Sandwich Co-Bulkhead of Cryogenic Tank on Launch Vehicle
- Effect of Cold Rolling and Heat Treatment on Microstructure and Mechanical Properties of Pt-0.7Ti Microalloy
- Symposium T: Materials Modeling and Simulation
- A Temperature Field Analysis for Contraction and Collapse of 72AU2 Hot-Rolled Steel
- Investigation of the Wear Behavior of High Strength and High Conductivity Cu-Cr-Zr Alloy under Dry Sliding
- Effects of Microstructure Transformation on Strengthening and Toughening for Heat-Treated Low Carbon Martensite Stainless Bearing Steel
- Hydrogen Isotopic Effects of Uranium Hydrides: First-Principles Calculations
- Finite Element Analysis of Removable Shape Memory Alloy Pipe Joint’s Cone Sealing Performance
- Stability and Electronic Structures of Mg2Pb (100), (110) and (111) Surfaces
- Finite Element Analysis of the Influence of Crack Tip Stress Distributionon Fatigue Crack Propagation Rate of 5XXX Aluminum Alloy
- Indenter Size Effect on the Reversible Incipient Plasticity of Al (001) Surface Studied via Quasicontinuum Simulations
- Strain Fields around Dislocation Cores Studied by Analyzing Coordinates of Discrete Atoms
- First-Principles Study of Structural and Thermal of α-Ni4N
- Application of Artificial Neural Networks to Optimize Processing - Properties of Ni-Tic Composite Coatings
- Mesoscopic Simulation of the Ferrite Nucleation on Austenitic Grain Boundary for Nanograined Steel
- Simulating Structural Transformation of a Cu1553 Nanoparticle on Heating at Atomic Scale
- Thermal Properties and Transition Temperatures of AlB2-Type Diborides
- Modeling of Flow Stress and Grain Size Based on Z Parameter and Material Constants of Al-5.2Mg-0.6Mn Alloy during Hot Deformation
- Characteristics of the Dead Zones in RH Desgasser with Simulation Methods
- Simulation of the Effect of Sintering and Interface on the Failure Mechanism of Thermal Barrier Coatings
- Evaluation of the Surface Tension of Silicon-Gold Binary Liquid Alloy
- First-Principle Investigation on the Secondary Bond in Stable mGeTe·nSb2Te3 Pseudo-Binary Chalcogenides
- Study of Magnetic Properties for Fe Nanoring with Different Degree of Eccentricity
- Characterization of Crack Initiation Life in Ferromagnetic Material by Metal Magnetic Memory Testing
- Influence of Carbon Nanotube Aspect Ratio on Glass Transition Temperature of Polymers: A Molecular Dynamics Simulation Study
- Diffusion of Epoxy Molecules on the Chemically Modified Graphene: A Molecular Dynamics Simulation Study
- Computer Simulation of the Early Stage of Precipitation of L12-Ni3(Al,V) Using Microscopic Phase Field Method
- Elastic Properties and Electronic Structures of L12-TiAl3 and L12-Ti(Al,Pt)3: A Density Functional Theory Investigation
- Vacuum Arc Remelting Process of High-Alloy Bearing Steel and Multi-Scale Control of Solidification Structure
Les mer
Produktdetaljer
ISBN
9783038353966
Publisert
2015-05-19
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1570 gr
Høyde
240 mm
Bredde
170 mm
Dybde
39 mm
Aldersnivå
P, UP, 06, 05
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
772