Applied Scientific Research and Engineering Developments for Industry
Heftet /
2013
/ Engelsk
Produktdetaljer
ISBN
9783037858103
Publisert
2013-11-14
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
200 gr
Høyde
240 mm
Bredde
170 mm
Dybde
100 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
2000
Redaktør
Collection of selected, peer reviewed papers from the 2013 International Conference on Mechanical and Electronics Engineering (ICMEE 2013), August 17-18, 2013, Tianjin, China.
The 427 papers are grouped as follows:
Chapter 1: Advanced Materials Engineering, Technologies of Processing;
Chapter 2: Developments and Technologies for General Mechanical Engineering;
Chapter 3: New Technologies and Methods in Construction, Geology and Engineering of Environment;
Chapter 4: Instrumentation, Technologies of Measurement and Detection;
Chapter 5: Mechatronics and Robotics;
Chapter 6: Modern Control and Automation;
Chapter 7: Power System and Energy Engineering, its Applications;
Chapter 8: Electrical Engineering, Electrical Machines and Apparatuses;
Chapter 9: Electronics and Integrated Circuits, Embedded Technology and Applications;
Chapter 10: Signal and Image Processing, Data Mining;
Chapter 11: Communication and Networks;
Chapter 12: Information Technologies and Engineering Management in Industry;
Chapter 13: Related Topics.
Les mer
Selected, peer reviewed papers from the 2013 International Conference on Mechanical and Electronics Engineering (ICMEE 2013), August 17-18, 2013, Tianjin, China
- Preface and Organizzing Committee
- Chapter 1: Advanced Materials Engineering, Technologies of Processing
- Influential Factors on Microstructure of LaB6 Films
- Research on Structural Properties of FePt: C Thin Films with FePt Underlayers
- Effect of UV Radiation on Different Voltage Grade of HTV-Silicon Rubber in Dry Conditions Performance
- Hydrothermal Synthesis of Zn2(MoO4)(SeO3) and Photocatalytic Applications
- Numerical Simulation of the Plasma-Assisted Combustion of Methane HCCI
- Effect of Growth Temperature on Thin Films Structure and Blue Photoluminescence Spectrum of Nanocrystalline ZnO Films
- Discussion and Improvement of Carburizing Defects
- Recovering of Iron from Feebly-Magnetic Iron Tailings Containing High Silicate
- Boom Section's Bionic Design Based on Bamboo
- Chiral Liquid Crystalline Ionomers Containing Sulfonic Acid Groups and Isosorbide
- The Model of Thermal Ignition of Gasoline-Air Mixture
- Multi-Scale Analysis for Tensile Mechanical Properties of Carbon Nanotube Fibers by In Situ Raman Spectroscopy
- Sum-Frequency Generation of Antiferromagnetic Sandwich Structure
- Effects of Plug Position on Mannesmann Piercing in Drill Steel Production
- Numerical Simulation and Experiment Research on Surface Defects for Thick Plate Multi-Point Forming Process
- Chapter 2: Developments and Technologies for General Mechanical Engineering
- Numerical Simulation and Structure Optimization on the Corrugated Tubes of a Double Pipe Heat Exchanger
- The Research on the Workspace of the 3-TPT Parallel Machine Tool
- Large-Tonnage Double Rotary Railway Crane Rotating Platform Finite Element Analysis and Optimization Design
- Research on Parameters Optimization of Biodiesel Engine Combustion System
- Large-Tonnage Double Rotary Rail Crane Chassis Based on ANSYS Optimization Design and Research
- Research about Slider Three-Dimensional Frictional Contact Problem of the Polygonal and Similar-Oval Jib
- Research on Vibration Model of Special Vehicle Based on Dual-Mass System
- Digital Analysis of Hydraulic Cone Valve Turbulence Based on Fluent 3D Solver
- Analysis of the Laminar Flow in the Hydraulic Poppet Valve Based on the Fluent 3D Solver
- Study on Vertical-Horizontal Coupling Vibration of Mill Rolls Based on the Nonlinear Rolling Force Model
- Influence of Curve Geometric Parameters on the Curve Negotiation Performance of Hot-Metal-Car
- Damage Analysis of Naval Gun Guided Projectile to Typical Anti-Ship Missile in Proximity Mode
- Optimal Design of Lifting Mechanism for Standing Rehabilitation Bed Based on MATLAB
- Inherent Strain Analysis of Thin-Walled Structure Welding Deformation
- Precision Analysis of Parametric Modification of the Die Face Based on Reverse Engineering
- Finite Element Analysis of Drill Tower Structure Based on ANSYS
- Study on Symmetrical Machining Technology of a Ship Model Surface
- Finite Element Analysis of Shelves Manipulator Bracket Based on Solidworks
- Structure Analysis of Inner Cylinder Components of Drum Washing Machine Based on Ansys/Workbench
- Optimization for Loading Path in Rear Sub-Frame Hydroforming Using Uniform Design and Response Surface Method
- Dynamic Analysis of Rotary Drillstring in Horizontal Well Based on the Fluid-Structure Interaction
- Optimization and Force Analysis of Bar Linkage Hinge Point of Self Erecting Tower Crane
- The Mechanical Analysis of the Coiled Tubing
- Finite Element Analysis of the Packer at Fracturing
- Stiffness Optimization for Springs in a Gun Cartridge Retaining Mechanism
- The Fatigue Life Prediction for the Transmittal Belt
- Study on Cold Start Influence Factors of Three Way Catalytic Converter
- Integrated Support Decision of Aircraft Hydraulic System Based on Sequence Operation Theory
- Experimental Study on Fatigue of Metal Rubber Vibration Isolator under Pulsating Cyclic Stress
- Research on Thermal Balance of Oil Gas Suspension Based on Vehicle Dynamics
- The Research on Reliability of Drilling Automatic Sampling Mechanism
- Modeling and Modal Analysis of Less-Teeth Gear Shaft
- Analysis of Fuel Properties Effects on Flame Radiation in a Gas Turbine Combustor
- Choice of Less-Teeth Gear Parameters Based on MATLAB
- Numerical Simulation of Conical Pick Cutting Coal and Rock Process Based on ABAQUS
- The Analysis of Coke Pusher Ram's Vibratory Response with Different Coke Pushing Speed
- Kinematic and Workspace Simulation of Flexible Assembly Tooling for Aero-Engine
- Analysis of the Ground Rib Axial Profile of the Spiral Guid Roller
- Evaluation of a Steam Jet Refrigerator with the Varying Specific Heat Ratio
- Analysis on some Mechanical Properties of the Horizontal Opening Catenary
- Based on the Nonlinear Dynamics of Linkage Analysis of Vibration Characteristics and Control Strategy
- To Improve the Performance and Efficiency of Refrigeration Systems by Using Refrigerant Pumps
- Application of Composite Core-Pulling Mechanism in Mobile Phone Cover Injection Mould
- Research on Vehicle Dynamics Random Response to Uneven Road
- The Stress Analysis of Joint Connecting Bolt of Submersible Electric Pump
- Dynamic Simulation and Optimum Design for the Main Drive System of Reciprocating Compressor Considering Joint Friction
- Research on Calculation Method of Equivalent Stress for Main Shaft in Wind Turbine
- Influence of the Driver Style in the Inlet Parking Process on the Energy Consumption of the EV Bus
- Numerical Simulation of Energy Saving at Different Air Supply Angles in Air-Conditioned Room
- The Design of Wind Tunnel to Research the Features of Insulator Deposition of Dirt
- Analysis and Study of the Transmission Path Based on the Body and NVH
- Simulation and Realization of Gas and Liquid Special Effect in Hovercraft Sailing Scene
- The Cleaning Performance Simulation of Rear Rolling Type Sweeper
- Analysis and Optimization on the Front Supporter of Concrete Mixer Truck
- Dynamic Damage of Aircraft Wing Leading Edge Impacted by Birds
- Modal Analysis of Arrow Shaped Shovel Based on ANSYS Workbench
- Optimizing for Lead-Bismuth Fast Reactor Guard Vessel Thickness
- Design Study on Skirt Support of Lead-Bismuth-Cooled Fast Reactor Vessel under Seismic Loading
- Design of High-Efficient Bits for Igneous Rock in Xushen Gasfield
- Interactive Visual Modeling and Simulation for Virtual Maintenance of Aircraft Landing Gear
- Boom Buckling Instability Capability Studies
- Modal Analysis and Structure Optimization of a Printed Circuit Board NC Drilling Machine
- Based on ANSYS Workbench High Speed Electricity Spindle Dynamics Characteristic Analysis
- Differential Thread Principle’s Application in Manual Drawing Device
- Numerical Simulation on Convective Heat Transfer in Microchannels of Two-Stage Y-Branch Bifurcation Structures
- Research on Repairing Deformation Rapidly for Steel Strip
- Study on the Structure of the Flexspline of Harmonic Reducer
- Verifying Three Nodes Optimization Based on LM-BP Neural Network and Hybrid Genetic Algorithm
- Chapter 3: New Technologies and Methods in Construction, Geology and Engineering of Environment
- Shear Displacement Method of Grouted Pile
- The Study on Development and Utilization of Coastal Environment
- The Study of Evolvement in Muddy Coast
- Research on Dynamic Load and Static Load Combination Effects on the Railway Bridge and Piers Impact
- Effect of Longyangxia Reservoir on the Variation of Water and Sediment
- Integration of Tree Models into a Real-Time Pollution Dispersion Simulation
- Research for Rectangular Beam of Dual-E Elastic Body of Six-Axis Force Sensor Based on Limit Memory Extended Kalman Filter
- Analysis the Vegetation and Soil Moisture in Beijing-Tianjin Area to Prevent Desertification by Long-Term Satellite Remote Sensing
- Evaluation of the Ecological Civilization Construction of Inner Mongolia
- Under the Action of Earthquake Mechanics Analysis of the Infill Wall in Plane
- Numerical Simulation and Analysis for Influence of Wall Effect on Cavity Shape
- Analysis of Engineering Geological Mechanics on the Jiasikou Debris Flow
- The Research of the Water Quality Prediction Model for the Circulating Cooling Water System
- Study on Mineral Blending Models for Poly-Metallic Open-Pit Mine
- The Study of Water Resources Optimal Allocation of South-North Project Receiving Area
- Water Exchange in North Harbor of Lingang Economic Area, Tianjin
- Transferring Simulation of Pollutants in YinLuan River Open Channel under Traffic Accidents
- Numerical Simulation of Pressure Loading Effects on Occurrence of Rock Lateral Cracks under Confining Pressure
- Collapse Simulation of Bricklaying Arch Based on 3D Distinct Element
- Flaws Simulation of Cave Depot in the Process of Explosion
- The Genesis of Layer-Bound Polygonal Faults in the Sanzhao Sag of Songliao Basin
- Influence of Porous Structure Properties on Anti-Drillability Characteristics of Rock
- Chapter 4: Instrumentation, Technologies of Measurement and Detection
- The Design of a Portable Instrument for Straightness Measurement of Large Machine Tool
- Design of Flare Gas Flow Measurement System on Offshore Oil Platform
- Development of Detecting System of Fighter Electrical Boxes
- Design of Distribution Bench for Precision Measurement of Micro-Irrigation Sprinkler Irrigation Uniformity Coefficient
- Numerical Simulation Study of Daqing Wuzhan Low Permeability Gas Reservoir
- Design and Simulation of Measurement and Control System for Silage Cylindrical Baler Based on LabVIEW
- The Technology of Ventilator Airflow Control
- Ultrasonic Slurry Concentration Meter Design
- Development of a Multi-Function Virtual Instrument Based on a Constant Current Source
- The Research of Gray Bus Positioning System
- Research on Monitoring System for Transfusion in Hospital
- Application of Distributed Measurement and Control System
- Information Extraction Method of SO2 Using Differential Optical Absorption Spectroscopy
- Simulation for Range Prediction of Active Sonar in Shallow Water
- Camera Calibration Method Based on Halcon
- The Application of Visual Attention Mechanism in Road Disaster Identification and early Warning System
- Research on Purification Performance of Diesel Exhausts Four-Effect Catalytic Purification System
- Incipient Fire Detection Method Based on Comprehensive Feature of Flame
- The Innovative Design of Measuring and Metrological Instruments Using Dimensional-Analysis
- Decision Strategy for Fault Troubleshooting Using Bayesian Influence Diagram
- Effects of Eddy Current within Particles on the 3D Solenoid Microfluidic Detection Chip
- The Design and Implementation of Cable Condition Monitoring System
- Measuring and Analyzing of Static Characteristics of Vehicle Capacitance Weighing Device
- Fault Diagnoses Technology of Broken-Blade Propeller Induced Shaft Vibration
- Geo-Acoustic Parameters Inversion from Vertical Coherence Characteristic of Ambient Noise
- Mechanical Press Slide Bottom Dead Center Measurement Based on Macro-Micro Adjustment Device
- Performance Monitoring and Analysis of the Process Compressor
- Fault Diagnosis for Temperature Signal of Turbine Blade Based on LS-SVM
- Switching Multisensor Improved Current Statistical Model for Maneuvering Target Tracking
- Research on Intelligent Diagnosis Technology of Transformer Fault
- Fault Diagnosis of Metro Vehicle Auxiliary Inverter Based on PSO-KPCM Algorithm
- Algorithm of Change Points Detection for a Trip Coil
- Application of Multi-Sensor Information Fusion Technology in the Fault Diagnosis of Transformer
- The Study and Application of High-Voltage Capacitive Equipments On-Line Monitoring System
- Application of EKF for an Electro-Hydraulic Servo System Using Model-Based Approach
- Remote Wireless Monitoring System for Wind Turbine
- Study of Circuits Fault Detection Based on Infrared Technology
- The Research of Full Digital Beneficiation Metal Detector
- Design of Mine Ventilators Monitoring System Based on ZigBee
- Assessing Coronary Arterial Dynamics from Cineangiograms
- A Grating-Based Dynamic Measuring Method of Small Three-Dimensional Angles
- Research on 3D Modeling System Based on Binocular Vision Image Acquisition
- Design of Temperature and Humidity Monitoring System Based on Wireless
- The Application Research on Underwater Riprap Recognition Using High-Density Resistivity Method
- Variable Number of Multi-Sensor Fusion for Indoor RFID Tracking System
- A Fault Diagnosis Method Based on Artificial Immune Network
- Water Film Detection in Water Distribution Test of PCCS
- An on Line Method of the Steady-State Data Acquisition
- Multi-Sensor Multi-Target Data Association Algorithm Based on Swarm Intelligence
- Chapter 5: Mechatronics and Robotics
- Design of Monitor System for JD15 Electro-Hydraulic Controlling Drill Rig
- Design of Household Conveying Robot Control System Based on STM32
- Design and Research on Actuator of Robot Joint Based on GMM
- Study on Error in Interpolation Algorithm of the-5-DOF-Hybrid Robot
- The Intelligent Synthesis Testing System for LB-703 Dint Arm
- Open Service Robot Development Platform
- Robot Stereo Vision Guidance System Based on Attention Mechanism
- Design of a Pan-Tilt System for Substation Inspection Robot
- Path Planning for Mobile Robot Based on Improved Ant Colony Algorithm
- Ship Rust Removal Spray Painting Robot Finite Element Analysis Based on ANSYS
- Studies on the Algorithm for Five-Axis NC Machining with Triangular Facet Model
- The Design and Implementation of the Expert System for Cutting Parameters Based on CLIPS
- Vehicle Network System CAN Protocol Based on the Anti-Jamming Methods Research
- The Automobile Brake Guards against Holds the Dead (ABS) Simulation Experiment to Install the Brake Flowing Tubing Head Pressure Examination System the Design
- Dynamic Characteristics of Five-Axis CNC Machine Tools
- A New Type Power Train System of Electric Hybrid Vehicle
- The Application Study of Image Recognition Technology in Substation Sequential Control
- Design and Research on Micro Axial-Flux Electromagnetic Generator
- Design and Implementation of a Large-Scale Gravity Compensation System for Lunar Rover
- Crosstalk Force Analysis for Optical Pickup Actuator Systems
- A New Hybrid Excited Magnetic Levitation Feeding Platform
- Research on Control Methods of Speed Stability by AR Model Based on Linear Ultrasonic Motor
- Chapter 6: Modern Control and Automation
- Analysis for Operation Control System Based on IDEF Method
- Control of Pulse Fatigue Test Press of Oil Cooler Based on Repetitive Control
- PLC Applied in the Three-Phase Stepper-Motor Control System
- Control System of Low Carbon and Energy-Saving Radiant Heating
- Studies on the Low-Voltage Dynamic Reactive Power Compensation and Switching Control for Capacitors Device
- Fuzzy Control System of Water Level Based on Fuzzy Reasoning
- Research of Robust Fault-Tolerant Control for T-S Fuzzy Time-Delays Descriptor System
- Robust Control of Modular Gun Propellant Select Mechanism with Unknown Dead-Zone
- Design and Application of Measure and Control System Based on CAN-Bus for Large Pumping Station Auxiliary Equipments
- Optimization Design of CVT Electro-Hydraulic Servo System Based on H∞ Control
- Fuzzy Control Based on Genetic Algorithm to Optimize the Mill Load
- Application of Fuzzy Smith Predictive Control in Mill Load
- Application of Auto-Control and Measurement System for Three Gorges Shiplocks Model
- Port-Controlled Hamiltonian Control of IM Based on Back-to-Back Converter
- Control System of Sensorless BLDCM Based on F28335
- Intelligence Predictive Control Study on Lime Rotary Kiln Temperature
- Design of Double Lifting AGV Control System
- The Automatic Control System Based on PROFIBUS for the City Sewage Treatment
- Adaptive Robust Control of Speed Sensorless Permanent Magnet Linear Synchronous Motor
- Motor Control Application Based on STM32 and PID Control Theory
- Nonlinear Coordinated Control of STATCOM and Generator Excitation Based on Improved Dynamic Surface Control Method
- Analysis on Improved Dijkstra Algorithm in Intelligent Transportation System
- Steam Dewaxing Casting Controller Based on S7-200 PLC
- Application of Double Motor DC Drive in the Crane Control System
- Asymptotic Stability Analysis and Controller Design for a Class of Switched Uncertain Singular Systems with Time-Delay
- Speed Loss Compensation Simulation Analysis on Variable-Speed Pump-Control-Motor System
- Control Strategy of the DC Drive Systems Based on the State Error Port-Hamiltonian Theory
- Design of Cable Main Insulation and Outer Sheath Insulation Online Monitoring System
- Research of the Structure and Control Strategy for Wind-Solar Hybrid Power System
- Two Synchronization Schemes for Chen Chaotic System
- A New Method for Full State Hybrid Projective Synchronization of Different Fractional Order Chaotic Systems
- Research on Control System of Tropical Intelligent Agriculture in Hainan
- The Hydraulic Stability of Heating Network with Remote Measurement and Control System
- The Generation of the Fuzzy Control Rules Based on Association Rules with Temporal Constraints
- The Development of Electric Propulsion Simulation System for Semi-Submerged Ship
- Study on Dynamic Performance of UPFC Based on PSASP
- Finite-Time Chaos Synchronization of Lorenz Chaotic System Based on the Passive Control Teachnique
- Simulation Study on Drawworks Heave Compensation System of Offshore Oil Drilling
- Design of Neural Network Controller Based on FPGA Distillation Column
- Design of the Wireless Data Acquisition System – Substation Management System
- Research on Appropriate Automatic Control Model in Rural Waterwoks
- The Control System of Test Bench for Thermal Insulating Properties of Building Doors and Windows Based on Fuzzy-PID Control
- Design of Soil Temperature and Humidity Remote Monitoring System of Tea Garden Based on GPRS
- Adaptive Control of Pulse Width Modulation Voltage-Source Rectifier with Disturbance Signals
- A Health Condition Monitoring Method of Aeroengine Gas Path System Based on Consistency Fusion and Neural Network
- Chapter 7: Power System and Energy Engineering, its Applications
- Prediction of Insulator's Equivalent Salt Deposit Density in Power System
- Research on the Reactive Power Optimization
- Research on the Improvement of OCT Used in Power System
- The Optimal Controlled Partitioning Strategy for Power System Based on Master-Slave Problem
- An Efficient Key Management Protocol for Multi-Microgrid Distribution System
- A Long-Term Frequency Dynamic Simulation Method of Power System with the Wind Farm Based on Quasi-Steady State Simulation
- External Network Equivalent of Wind Power Simulation for Fu Jian
- Relay Protection Security Analysis of Jiuan Substation under Complex Power Transmission Environment
- Analysis of Residential Loads Behaviors Integrated with Distributed Generation under Different Pricing Scenarios
- Metering Infrastructure and its Reference Architecture of Smart Distribution Grid Based on the Domain Model
- Analysis on Influence of Complex Power Transmission Environment on Main Equipment Safety of JiuAn Substation
- Multi-Scenario Based Generation Scheduling of Power System with Wind Farms
- Influence of Fuel Supply Advance Angle on Fuel Economy of Diesel Engine with Ethanol–Diesel Blend Fuel
- Reliability Compliance Test Method Research for Wind Turbine
- The Impact on the Voltage Fluctuation of Wind Power Integrated Separately in Chongqing Distribution Network
- Study of Grid Trust Model Based on Virtual Domain
- Design and Implementation of Wind Farm’s Power Prediction Web System
- Experimental Performance for a Universal Single Mooring Platform Applied to Wave-Energy Conversion System
- Study on Collection Efficiency of Buoy in Wave Power Generation
- Research on Power Flow Control of UPFC Based on PSASP/UPI
- Study on Improvement Transient Stability of the Large-Scale Wind Farms Integration with STATCOM
- Study on Simulation System of Relay Protection for Smart Substation
- Research on Networking of the Large Capacity Power Backbone Transmission Network Based on Cross Technology
- Study on Topology Optimization Algorithm of Power Communication Network Based on Complex Network Theory
- Research on Optimal Gradient - Climbing Algorithm in Wind Power Generation
- A Self-Tuning Power System Stabilizer Design
- Analysis on Altitude Correction Factor of 750kV Transmission Line Conductors Corona Inception Voltage
- Influence of Icing to the Corona Loss Characteristics of the AC Power Transmission Lines
- Research on the Optimal Dispatching Strategies of Power System with Large-Scale Wind Power
- The Study of Wind Turbine Based on Fuzzy Logic
- Backup Protection for Six-Phase Transformer Based on Six-Sequence Components
- Novel Global Maximum Power Point Tracking Algorithm for PV Array under Partially Shaded Conditions
- The Fast Estimation of the Electromechanical Oscillation Frequency
- Wind Turbine Risk Assessment Using Modified Failure Mode and Effects Analysis
- Chapter 8: Electrical Engineering, Electrical Machines and Apparatuses
- Application of Chaos in Permanent Magnet Synchronous Motor Optimization
- Output Controllability of Buck Converter in DCM
- The Influence of Transformer Leakage Inductance and Distributed Capacitance Parameter on the Output of Switch Power Supply
- Modeling for Segmented Tracks Planning of Roadway-Powered Electric Vehicles
- Power Line Carrier Communication Channel Model Applied to Shipboard Electric Network
- The Composite Method of Torque Ripple Restraining in Brushless DC Motor
- The Simulation Study on Transformer Oil-Paper Insulation Polarization Spectrum
- Double Closed-Loop Control of the Three-Level Rectifier Based on Synchronous PI Current Decoupling
- Research on SVPWM Inverter Transient Output Characteristic
- Research of Practical Solar Energy Intelligent Regulated Power Supply
- Research on Three-Phase VIENNA Converter for PFC
- Optimal Design of Transverse Flux Permanent Motor with Reducing Cogging Torque
- Switching Power Supply System in Parallel Based on Master-Slave Current Law
- Research on Anti-Jamming Technology of Variable Adjusting Speed System
- Study on the Insulating Spacers Surface Discharge of GIS
- Study of Capacitor Bank Fault Location
- Realization of Fixed Switching Frequency Direct Power Control for Three-Phase AC/DC Converter
- An Optimal Design of PI Control in the Application of Active Power Filter
- Hysteresis Current Control Technique Based on Space Vector Modulation for Active Power Filter
- Chapter 9: Electronics and Integrated Circuits, Embedded Technology and Applications
- Research on the Positioning Algorithm of BD/GPS Integrated Navigation System
- The Video Device to Image the Side of Deep Pipe
- Application of Matlab to write a Script for HFSS’s Eigenmode Solution of Circular Cavity
- A New Improvement of Radial Line Slot Antenna
- A Study on Tracking Accuracy of Netted Radar
- Underwater GPS Positioning System Based on a Dual Acoustic Device
- Vehicle-Carrying Multi Channel Data Acquisition System Based on the CompactRIO
- Comparisons between Ku-Band GaAs SSPA and GaN SSPA with a Same Architecture
- Reduction of Glitch Interference in FPGA Design
- Design and Develop of Functional Safety Temperature Transmitter for Fault Status
- Design of 25-Gb/s Half-Rate Clock and Data Recovery Circuit for Optical Communication
- Design of Encoder and Decoder for Q-Ary LDPC Codes Based on FPGA
- Research and Design of the Solar Charging System Based on FPGA
- A Ku-Band Wideband Power Divider with Defected Ground Structure
- Design of 5.1 Channel Audio System Based on Zigbee and PurePath Wireless Technology
- Automatic Measurement and Modeling Implementation of Diode Reverse Recovery
- Application of EMI Filter in Design of Switching Power Supply
- Vision-Based Route Recognition of AGV on ARM Platform
- Design and Implementation of Wireless Medical Monitor Based on WIFI Technology
- Improved Baseband Mapping Method for G3 OFDM Technology
- A Ring Topology of Double Circuit with Multiple Nodes Redundant Bus Design and Communication Strategy Research
- Study of an ENG-Inspired Two-Sided UHF RFID Tag Antenna
- Airborne Doppler Navigation Radar Intelligent Test System
- A CMOS Bandgap References Voltage Circuit Using Current Conveyor for Power Management Applications
- High-Order Active Filter Design Based on Component-Level Signal Flow Graph Method
- Design of Antenna Minimization for Wireless Sensor Network Node
- Chapter 10: Signal and Image Processing, Data Mining
- Analysis of Time-Phase Modulation for Multiple Users
- Linear Block Codes for Six-Dimensional Signals over Finite Fields
- Mining Indirect Temporal Sequential Patterns in Large Transaction Databases
- A Robust State Estimation Method Based on Exponential Weight Functions
- Foundation of the Speech Source for the Speech Warning System of the Plane
- A Novel Approach for Time Registration of Multi-Radar Data
- Energy Based Dual-Microphone Electronic Speech Segregation
- Emotion Recognition from Speech Signals Using Elicited Data and Fuzzy KDA
- Voltage Flicker Extraction Based on Wavelet Analysis
- De-Noise of the High Frequency Corona Current with Wavelet Analysis Method
- Improved Speech Enhancement Algorithm Based on Bark Bands Noise-Estimation for Non-Stationary Environment
- Objective Recognition Algorithm of Remote Sensing Image Based on Wavelet Transform
- An Algorithm of the LMS Adaptive Filtering in Linear Canonical Transform Domain
- ANFIS Model for Time Series Prediction
- Recent Frequent Item Mining Algorithm in a Data Stream Based on Flexible Counter Windows
- Application Research of the Power Spectrum Estimation in the Ankle-Brachial Index Detection
- A Novel Scheme for Time Delay Estimation in the Fractional Fourier Transform Domain
- A Configurable Tilt License Plate Correction Method Based on Parallel Lines
- Image Threshold Segmentation Method Based on the Gradient Adjustment and Improved Moment Preserving
- Gauss Background Modeling Method Based on Multi-Scale Feature
- Comparison of Optical and Concentration Feature Used for fNIRS-Based BCI System Using HMM
- Alternate Orthogonally Polarization Jamming on ASLC System
- A Straight Line Preserving Seam Carving Technique
- Realtime Recognition of Attention State by Complexity Analysis of Electroencephalogram
- Detection and Tracking of Cooperative Target for Space Exploration Task Based on Visual Measurement
- Visual Saliency and Extended Hidden Markov Model Based Approach for Image Splicing Detection
- Research of Sandbox Sand Body CT Image Processing Methods Based on Fuzzy Similarity
- Studies on Phased-Array Radar Jamming and Simulation System
- Multi-Unknown Breaks Estimates in Presence of Fractional White Noise Disturbance
- An Improved Tracking Algorithm Combing Color and LBP Texture Features Based on Particle Filter
- Research Based on Template Matching Technologys Sandbox Sand Body CT Image Processing Methods
- A Self-Adaptive Edge Detection Approach by Improved Isotropic Sobel and OTSU
- Based on Digital Image Processing Ore Appraisal Method Research
- A Way to Improve the Efficiency of High Frame Rate Imaging Algorithm with Limited Diffraction Beams
- The Application of the Moving Object Detection in HD Video Surveillance System
- A Semi-Supervised Fuzzy Clustering Algorithm Based on Mahalanobis Distance and Gaussian Kernel
- Chapter 11: Communication and Networks
- Measurement and Analysis of the Low-Voltage Power Line Narrowband Carrier Channel Attenuation
- Design of CAN-FlexRay Gateway based on Node Mapping Methods for In-Vehicle Network System
- 3-D Research about Walfisch-Bertoni Model
- Design and Implementation of Object Monitoring and Management System for Satellite Location
- Outdoor Personnel Positioning System Based on GPS
- Study of the Bidirectional PON Performance Based on the Optisystem
- Design of Intelligent Addressable Broadcast System Based on Zigbee
- Design on the Monitor System of IPTV Program Broadcast
- The Principle of Conditional Access System and the Realization of Set-Top Boxes
- Research on Security Communication for SDG Integrated QKD
- A Class of Large Family of Binary Sequences with Low Correlation and Large Linear Span
- Modeling and Simulation of the Propagation Characteristics by Underground Current Field
- MapReduce Implementation of Face Recognition Based on HOG Feature and NSMD
- Design of Modified Minsum Decoder of LDPC Code in the Simplified Difference-Domain
- Modeling and Simulation of the Propagation Characteristics by Underwater Conduction Current Field
- Joint Selection of OFDM Parameters in Mobile Satellite Communications
- Distributed Group Key Management for Secure Electronic Communication
- Effects of ASE on DPSK Modulation Formats with Different Duty-Ratio in Optical Transmission System
- Design and Implementation of Fixed-Phone Cluster System Based on Modern Communication Technology
- The Network Management Based Multi-Channel Connection Management of MOST
- Cognitive Impulse Ultra Wide Band Spectrum Sharing Radio and Pulse Shaping
- Design of Secure Routing Protocol Based on AODV
- Wireless Sensor Network Localization Based on Semi-Supervised Local Subspace Alignment
- A New Key Management Scheme for Hierarchical Wireless Sensor Network
- Study on Best Partner Selection Algorithms in Cooperative Network Coding Systems
- A Grid-Based Relay Node Placement Algorithm in Wireless Sensor Networks
- A New Channel Conflict Model for Multi-Radio Multi-Channel Wireless Networks
- Performance Analysis of MAC in VDL2 Based on OPNET Simulation
- The SSL MIMT Attack with DNS Spoofing
- OPNET Network Simulations Based on the Performance of WLAN IEEE802.11
- Realization of Real-Time Data Exchange between OPC Client and Multiple Remote Servers
- Improved RFID Anti-Collision Algorithm Based on Dynamic Framed Slotted ALOHA Algorithm
- Chapter 12: Information Technologies and Engineering Management in Industry
- Research on the Method of Text Information Hiding Based on XML
- Research on Entity Resolution Algorithm Based on Domain Ontology Using MapReduce
- An Improved Estimation of Distribution Algorithm Based on the Entropy Increment Theorem
- Web Service QoS Matching Research Based on Ontology
- Design and Implementation of a Data Warehouse ETL Tray Program
- Reachability Analysis of Perception Layer Scheduling for IoT
- Research on Customizable Modeling Workflow Engine in Information System
- A Novel Learning Evaluation Method Based on RBF Neural Network
- CMM Based Requirement Engineering Model in Software Development
- A Hierarchical Access Control Scheme Based on Lagrange Interpolation and ELGamal Algorithm with Numerical Experiments
- An Adaptive Load Balancing Method of Adjustment Based on Cloud Computing Resources
- A New Watermarking Algorithm for Relational Database Copyright Protection
- A Bit Rate Control Adaptive Optimization Algorithm for H.264/AVC
- Iron Ore Grinding Energy Conservation Research Based on Neural Network
- Long-Term Sales Forecast Method Based on Grey Model and Artificial Neural Network
- Research on the Smart Grid Dispatching System Based on Cloud Computing
- Database Design for Archives Management System
- A Fast Scheduling Algorithm for Multiple User MIMO-MRC System
- Use of Information Technology in Design Interface Coordinate
- Optimisation of Process Routing in CAPP Using Genetic Algorithm and Graph Theory
- Study of Crown Three-Dimension Model Rebuilding Based on RE Technology and its Laser RP Technology
- Experimental Analysis of RSSI-Based Underground Tunnel Localization with Wireless Sensor Networks
- Study on Feature Modeling Based on Ontology
- An Implementation of Documents Interoperability Measuring System
- The Architecture of IOT Smart Service System of Ocean Fishing Vessel and its Application Based on Petri Net
- Research on Framework Structure for Scientific Research Management System
- Semantic-Based Three-Dimensional Modeling of Virtual Reality Scenes
- The Principle of Dynamic Diagnosis Based on Integrated Maintenance Information and its Application
- A Research on KVM I/O Performance
- Generating Idempotents of Cubic Residue Codes over the Field F4
- Multiple Factor Ambiguous Pattern Recognition Based on Secure Multi-Party Computation - An Important Future Technology in Engineering Application
- An Efficient Parallel Montgemery Cryptography for Multi-Core Processor
- ID-Based Multi-Signature Scheme in Electronic Communication
- The Application of Entropy Weighting Ideal Point Method in Electronic Information Equipment System of Systems Construction Decision-Making
- A Flexible Workflow Engine for Product Design Process
- Application of Digital Factory Technology for Transmission Production Line
- Research and Development of Mes System for Gearbox Production Line
- The Research and Development of Digital Factory Integrated Information System for Discrete Manufacturing Enterprise
- Study on Maintenance Path Planning of Parts Based on CATIA Platform
- Construction and Implementation of Coal Mine Operating Management Digital System
- The Researches of Enterprise Informatization Upgrade Investment Resource Allocation
- Development and Application of the Railway Transportation Management Information System
- An Integrated Production System Model and Project Plan Restricted Pull-Way Production Control Method for Lean Shipbuilding
- Study of Production Scheduling of the Digital Workshop on Limited Cache Area
- Modeling and Analysis of the Manufacturer Model of Remanufacturing Closed-Loop Supply Chain Under Uncertain Demand
- Study on Optimal Scale and Layout of Electric Vehicle Charging Stations Based on Chaotic PSO Algorithm
- Applications of Interval Theory in the Evaluation and Decision Making of Power System Projects
- Parametric Design Study of the Nonstandard Serialized Assembly
- Design of a Confidentiality and Access Control Solution for Content-Based Publish/Subscribe Systems
- Application of Participatory Sensing in Meteorological Information Service System
- Chapter 13: Related Topics
- Grey Relational Analysis to Assess Algebraic Reasoning Test of the Pictorial Pattern
- New Feedback Optimization Method Based on Arithmetic Sequence for an Extended LED Source
- Persistence Properties and Unique Continuation of Solutions of a Two-Component Camassa-Holm Equation
- Intelligent Optimization Study of Traveling Salesman Problem
- PHD Filter for Multitarget Tracking with Range Ambiguity
- A Natural BEM on Non-Uniform Grids and its Coupling Method with their Moving Mesh Applications
- Research on Vehicle Routing Optimization Based on Improved Ant Colony Algorithm
- Experimental Investigation of the Water-Based Fog Screen System in Photoelectric Interference
- Structural Topology Optimization for Improvements of some Shell Structures' Rib Design Process
Les mer
Produktdetaljer
ISBN
9783037858103
Publisert
2013-11-14
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
200 gr
Høyde
240 mm
Bredde
170 mm
Dybde
100 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
2000
Redaktør