Applied Mechanics and Materials II
Heftet /
2014
/ Engelsk
Produktdetaljer
ISBN
9783037859841
Publisert
2014-03-12
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
3050 gr
Høyde
240 mm
Bredde
170 mm
Dybde
82 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1630
Collection of selected, peer reviewed papers from the 2013 International Conference on Applied Mechanics and Materials (ICAMM 2013), November 23-24, 2013, Zhuhai, China.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 302 papers are grouped as follows:
Chapter 1: Damage and Fracture Mechanics;
Chapter 2: Fatigue and Creep;
Chapter 3: Dynamics, Vibration and Structural Stability;
Chapter 4: Solid Mechanics Theory and Methods and Engineering Application;
Chapter 5: Fluid Mechanics and Fluid Engineering;
Chapter 6: Computational Mechanics;
Chapter 7: Biomechanics and Sports Mechanics;
Chapter 8: Research and Design in Mechanical Engineering and Manufacturing;
Chapter 9: Geotechnical Engineering;
Chapter 10: Structural Engineering;
Chapter 11: Hydrology and Hydraulic Engineering;
Chapter 12: Construction Materials;
Chapter 13: Seismic Engineering;
Chapter 14: Architectural Design and Theory;
Chapter 15: Composites and Polymers;
Chapter 16: Micro / Nano Materials;
Chapter 17: Metal and Alloys;
Chapter 18: Biomaterials and Biotechnology;
Chapter 19: Materials Processing Technology and Chemical Engineering;
Chapter 20: Information Technologies and Computational Algorithms;
Chapter 21: Engineering Management
Les mer
Selected, peer reviewed papers from the 2013 International Conference on Applied Mechanics and Materials (ICAMM 2013), November 23-24, 2013, Zhuhai, China
- Preface and Conference Organization
- Chapter 1: Damage and Fracture Mechanics
- Influence of the Cross Section Shape on Energy Absorbing Component of Bumper Subjected to Low Speed Crash
- Optimization of Sonic Boom Suppression by Off-Body Energy Deposition
- Evaluation of Stress Corrosion Resistance Properties of 15CrMoR(H) in H2S Environment
- Analysis of Plastic Strain between Substrate and Micro-Cantilever under Different Deformation Characteristics
- Evaluation of the Higher Order Terms of the Wedge-Splitting Specimen Based on the SBFEM
- Study on Failure Mechanisms of Composite Materials Based on HHT
- The Research on Oblique Crack Tip Deformation Field of Airship Envelope Composites Based on the Digital Speckle Correlation Method
- Numerical and Experimental Buckling and Post - Buckling Analysis of Composite Cylindrical Panel with Delamination
- Chapter 2: Fatigue and Creep
- Finite Element Analysis of Input Axis in Six-Speed Transmission
- Design of Flat Ends in Pressure Boilers with Circular and Elliptical Stress Relieve Grooves
- Analytical Estimation of Maximal Fatigue Loads in Cylindrical Roller Bearings
- Analysis on Stress and Contact Failure of BNC Connector Components
- Qualitative Calculation of Fatigue Life for Turbine Rotor Blade
- Chapter 3: Dynamics, Vibration and Structural Stability
- Modal Stability Control of a Wheeled Heavy Machine
- Initial Temperature Influence to the Rectangular Plates Free Vibrations under Different Types of Boundary Conditions
- Research on Analytic Calculation Method of the Dynamic Response of Buried Pipelines under Indirect Ground Shock
- Dynamic Experimental Investigation on the Fundamental Frequency of Liquid Storage Tanks under Seismic Excitations
- Design Principles of Controlling Vehicle Gear Whine Noise Based on Loudness Metric
- Dynamics of Turbocharger Rotor with Spin Softening Effect
- Study of Contact Interface Rough Effect on Vibration Stress Wave Propagation
- Performance Analysis and Improvement Design of School Bus Seat Based on Workbench
- Sensing of Driving Conditions Based on Vibration Signal
- A Novel Structural Form of Semi-Submersible Platform for a Floating Offshore Wind Turbine with Hydrodynamic Performance Analysis
- Effects of Wind Load on Hydrodynamic Performance of an Offshore Wind Turbine Semi-Submersible Platform
- Tendon Response of 10 MW Offshore Wind Turbine TLP Platform in Extreme Environment Condition
- Oscillation Suppression in a Delay-Coupled Flexible-Joint System
- Development of an Novel Adaptive Suspension System Based on Ball-Screw Mechanism
- Stable Platform Based on Workbench Vehicle Structure Analysis
- Chapter 4: Solid Mechanics Theory and Methods and Engineering Application
- A Method for Calculating the Amount of the Deflection and Force-Energy Parameters for Copper-Clad Steel Tube in the Process of Straightening
- The Sinusoidal Buckling Mechanical Analysis for the Coiled Tubing Based on Energy Method
- The SVC Based AFOSM Method for the Structure Reliability Sensitivity Analysis
- Research on Hexahedral and Tetrahedral Mesh Applied to Strength Analysis of Bogie Frame
- Research on Geometry Model and Stress State Leading-In through Heavy Rail Cooling to Compound Straightening
- Dynamic Response Analysis of Square Honeycomb Sandwich Plates Subjected to Blast Loading
- Investigation into Dynamic Postbuckling of Thin Rectangular Plate under Elastic Compression Wave
- Chapter 5: Fluid Mechanics and Fluid Engineering
- Study on Flow Rate and Steady Flow Force of Hydraulic Combination Valve Based on CFD
- Research on Effects of Positioning Ways on the Strength of Port Plate in Axial Piston Motor
- Investigation of the Predictive Ability of Two Advection Schemes on the Formation of a Turbulent Separation Bubble in a Boundary Layer Wind Tunnel
- The Numerical Simulation and Calculation of Aircraft Horizontal Stabilizer to Aerodynamic Forces by Using Visual Method
- The Simplified Flow Field Analysis Method of Multi-Layers Parallel Plates Perfusion Bioreactor
- Study on the Blood Flow with Rolling Manipulation of Traditional Chinese Massage
- Investigation of CFD Method Simulating Hydrodynamic Performance of AUV with Complicated Shape
- Direct Solution of Three-Dimensional Turbulent Rayleigh-Bénard Convection
- Study on the Characteristics of the Flow Resistance of the Mixed Plate Heat Exchanger
- Influences of the Compliances and the Resistance on Pulsatile Flow Waveforms
- Flow Field Numerical Simulation Analysis of Five Wing Horizontal Wave Turbine Power Plant with Different Blade Angles
- Simulation Study of Three-Phase Flow Field Based on Microbubble Flotation
- Numerical Simulation of the Effect of the Uneven Wall on the Liquid Film Flow
- Computational Fluid Dynamic of Date Transfer
- Supersonic Bi-Directional Flying Wing Wave Drag Optimization Based on Alternative Form of CST Method
- New Exact Solutions for Stokes First Problem of a Generalized Jeffreys Fluid in a Porous Half Space
- An Analytical Solution of Wave Exciting Loads on CALM Buoy with Skirt
- Understanding Regular Waves Effect on Ship by Numerical Wave Tank Simulation
- Suppression of Vortex Shedding of Circular Cylinder by a Small Control Rod
- Numerical Simulation of Magnetostriction-Induced Cavitation Flow
- A Method for Aerodynamic Characteristic Analysis of Hypersonic Aircraft Based on Response Surface Model
- An Immersed Boundary Method for Compressible Flows with Complex Boundaries
- A Numerical Investigation on Hydrodynamics of Multiple Floating Bodies in Offshore Installation Engineering
- Chapter 6: Computational Mechanics
- Computational Technique of the Sliding Interface in Numerical Simulations of 3D Penetration
- The Energy Relaxation Method for the Verification of Finite Element Analysis
- Mechanical Analysis and Strength Evaluation of KEY COMPONENTS Tripod of SNUBBING UNIT
- Nonlinear Calculating Method for Multi-Bar Luffing System of Giant Crane Considering the Sagging Effect
- The Mathematical Model of Crane Hoisting Mechanism
- Dynamic Characteristics Analysis and Modeling of Giant Magnetostrictive Actuator Turning System
- Cross-Deck Slamming Load Calculation of Trimaran Based on Modified Plate Slamming Theory
- Simulation of Red Particles in Blood Cell
- Chapter 7: Biomechanics and Sports Mechanics
- A Study on Strength and Training Characteristics of Elite Female Skaters
- The Fitness Characteristics of Elite Female Skaters and Regression Analysis
- Research on Body Pressure Distribution at Different Angles of Wheelchair Seat Surface
- Chapter 8: Research and Design in Mechanical Engineering and Manufacturing
- Study on Structure Analysis and Control of the Underwater LED Lamp Capable of Changing Brightness
- Affect the Comfort of Pants Crotch Curve Analysis of the Factors
- Concept of the Partial Throw-Away Design of Piezoelectric Micropump for Medical Uses with Low Cost and Waste
- Monopole-Gear Design Based on Neural Network and Modified Particle Swarm Optimization
- The Influences of New Paper Surface Efficiency on Printing Quality
- RCS Calculation of Tank Turrets and their Improved Stealth Shapes
- Kinematics Analysis of Morse CVT Input Mechanism
- Development of a Self-Balancing Cooling System Based on Harvesting Heat via Stirling Engine
- Small Refrigerator Simulation and Experimental Study
- Solar-Powered Wireless Sensor Network’s Energy Gathering Technology
- Research on the Application of Green Air Conditioning in the Granary
- Performance Comparison for Different Material Quantum Dot Single Intermediate Band Solar Cells
- A Method for the Assessment of the Inhalation Dose Exposure to Radionuclides in an Indoor Environment
- Chapter 9: Geotechnical Engineering
- Simulation of Primary Fracture Propagation around Compressive Cavity with the Extended Finite Element Method
- Study on Protection Measures of Highway Cutting Soil Slope in Seasonal Frozen Regions
- Research on Stability of the Rock-Socketed Piles in a Landslide Control Project
- Reliability of GDS-RCA Resonant Column on Routine Experimentation
- Study on Test and Practical Application of Solidification Treatment of Wasted Mud
- Characters Analysis of the Retaining Structure of the Foundation Pit under Local Load
- Approximate Analytical Method of Load-Settlement Relation for Composite Foundation with Lateral Restriction
- A Method to Determine Pre-Consolidation Pressure of Soft Soil in Dongting Lake Area
- Laboratory Test Method for Dynamic Rebound Modulus of Subgrade Red Clay in Moist-Heat Area
- Experimental Study of Influence Factors in Unsaturated Soil Infiltration Rate
- Experimental Study on Influence of Seasonally Frozen Ground on Horizontal Frost-Heave Force of Frozen Wall
- Effect of Different Organic Matter Content on Soil Moisture Dynamics
- Meso-Mechanical Simulation of Fracture Grouting under Fluid-Solid Coupling Environment and Engineering Applications
- Study on Grouting Heave for Pipeline Underground in Urban Tunnel Engineering
- Further Debate about Visual Design Methods for Pile Foundation
- Application of Axial Force Compensation for Steel Support System in Practical Project
- Experimental Study on O-Cell Test of Long Rock Socket Bored Pile
- Research on Stability Analysis of Soil Slope in Consideration of Creep Property
- Geotechnical Engineering Anti-Leakage in Unstable Mountain
- The Grouting Diffusion Model of Power-Law Fluid in Single Fracture
- Hydro-Mechanical Coupled Analysis of the Variable Permeability Coefficient of Fractured Rock Mass
- Analysis on Railway Ballast-Glue Micro-Characteristics
- FBG Sensor Application for GFRP Soil Nailing Pull-Out Test
- Simulation and Optimization on GFRP Soil Nailing Support
- Comparative Analysis on Stress-Strain Characteristics for Cement Stabilized Macadam Base in Different Layer Contact Conditions
- Comprehensive Prediction of Rockburst in High-Speed Railway Tunnel
- Nonlinear Dynamic Analysis of Macroscopic Fracture of Limestone in General Experiments
- Numerical Simulation on Soil Pressure Distribution Characteristics of Gravity Retaining Wall
- Comparative Analysis on Different Types of Anchor Reinforcing Gravity Retaining Wall
- The Research on Applied of Cement-Soil Mixing Method Reinforcing Shallow Soft-Soil Foundation in Yinchuan Distric
- Numerical Simulation of the Effect of Joint Orientation on the Failure Strength of Rock
- Analysis of Individual Contribution of Two Compression Waves in Vertical Vibration of Water-Saturated Soils
- Experimental Study on Creep of Highly-Weathered Breccia
- Dynamic Stability Analysis of Defective Piles under Vertical Harmonic Load
- Numerical Simulation on the Stress Characteristics of Prestressed Retaining Wall
- The Effect of Hole behind Lining on Safety of Tunnel
- A Mathematical Model for Subgrade Soil Water-Vapor Migration
- Transformation of the Triaxial Seepage Device for Measuring Deformation of Coal Containing Gas
- Physical and Chemical Characteristics of High Clay Content Dredger Fill in Different Regions
- Acoustic Emission (AE) Propagation Attenuation Theory and Rule in Non-Perfect Elastic Coal and Rock
- Experimental Study of C Band Passive Microwave Remote Sensing of Soil Moisture
- Chapter 10: Structural Engineering
- The Local Stress Analysis for the Anchorage Zone of Tooth Plate in Steel Box Girder
- Analysis on Vertical Swivel Construction of Cable-Stayed Bridge with Steel Arch Pylon
- Redistribution of Internal Force under Structural Defect and Non-Linear Spatial Stability under Live Load and Wind of Tied-Arch Bridge
- The Adhesion Experimental Study on the PESB
- Based on ANSYS Buckling-Restrained Brace Frame Structure Shock Absorption Analysis
- Research on Performance of Precast Two-Way Hollow Slab Shear Wall with Cast-In Situ Boundary Elements
- Theoretical and Experimental Research on Joint Slippage Effects of Lattice Angle Steel Tower
- A Iterative Computation Method for Main Cable Shape Calculation of Self-Anchored Suspension Bridge
- Storey-Adding and Strengthening Design for A Reinforced Concrete Frame Structure
- Jacking Technology for a Simply Supported Girder Bridge
- Research on CFRP Strengthening Corroded Reinforced Concrete Columns in Seismic Performance
- Design Method of Shear Resistance of Hybrid Fiber Reinforced High Performance Concrete Deep Beams
- An Incremental Method for Cable Force Tuning of the Concrete Cable-Stayed Bridge Considering Cable-Girder Temperature Difference Effect
- Pull-Out Tests of Deformed Bars from Ferrous Mill Tailing Concrete
- Numerical Study on the Influence of Sleeve-Rib Space on the Static Response of Grouting-Sleeve Reinforcement-Connection Component
- Analysis of the Impact Effect of the Suspender System in a Half-Through Concrete Filled Steel Tubular Arch Bridge
- The Ultimate Bearing Capacity Analysis of RC Beams Strengthened by Externally Bonded and Anchored I-Section Steel
- Analysis on Fire-Resistance Performance of Slabs Strengthened by Carbon Fiber Sheet Bonded with Inorganic Adhesive
- Numerical Analysis for Geometry Nonlinear Characters of Laminated Box Beam Columns
- Structural Optimization Design Considering Reliability Constraints
- Comfortable Evaluation of Bridge-Station Combined Large Span High Speed Railway Station under High Speed Train Load
- Modal Parameters Identification of Civil Engineering Structures Based on the Random Decrement Technique
- Structural Modal Parameter Identification Based on ARMA Model
- Flexural Behavior of CFRP Strengthened Reinforced Concrete Beams
- Application of Modified Consistent Mode Imperfection Method in Stability Analysis of Single-Layer Reticulated Shells
- Study on the New Energy-Saving Structure System with Seismic Performance
- Model Test for Hydrodynamic Parameters of Immersed Tube Tunnel in Static Water
- Study on Truss Structure Damage Identification Base on Residual Force Vector
- Research of Rigid Pavement on Structure Combination of HMA Overlays
- Chapter 10: Structural Engineering
- Interfacial Shear Stresses Calculation of RC Beams Strengthened with FRP Plate under Symmetry Concentrated Loading
- FEM Analysis of Impact Tests for Steel Plate Concrete Panels against Scaled-Aircraft Impact
- Seismic Performance Analysis under Different Conditions of Location for Shear Wall Frame Shear Structure
- Stochastic Imperfection Mode Superposition Method for Stability Analysis of Lattice Domes
- Investigation on Wind Tunnel Blockage Effects of High-Rise Building
- Research on the Wind Tunnel Force Balance Tests of Long-Span Closed Coal Trestle
- The Design of Blasting Demolition of the Reinforced Concrete Chimney Based on Complicated Conditions
- Stochastic Analysis to Truss Spar Platform in Deep Sea
- Test Installation of a Marker-Based Framework for Structural Health Monitoring of Bridges
- Aerodynamic Testing of Bridge Structures
- Chapter 11: Hydrology and Hydraulic Engineering
- A Hydropower Station Energy Dissipation Shape Optimization Test
- A Study of Suspended Sediment Transport Characteristics in the Offshore of Yangtze Estuary
- The Evaluation Model of Fuzzy Analytic Hierarchy Process in Water Project of Xiasha District Based on Entroy Weight
- Research on Automatic Safety Monitoring System for Artificial Islands
- The Application Study of Non-Linear Dynamic Contact Model of Arch Dam with Contraction Joints
- Two-Dimensional Shear Stress on Bonding Interface of FRP Plate Reinforced Hydraulic Concrete
- Research on Relation among Inlet/Outlet Pressure, Pressure Loss and Inlet Velocity of a Complex Resistance Muffler
- The Impacts of Water Transfer on Thermal Structure of Shallow Reservoir
- The Application of Entropy Weight of Attribute Recognition Model in Reservoir Eutrophication Evaluation
- The Classification and Analysis of Risk Response Measures in the Hydraulic Engineering Slope
- Prediction and Optimization of Groundwater Development in Beijing Plain
- Studies on Coupled Model of Seepage Field and Temperature Field and Stress Field
- Multiple Stepwise Regression Analysis Crack Open Degree Data in Gravity Dam
- Chapter 12: Construction Materials
- Microstructure Analysis of the Influence of Composite Polymers on Concrete Mechanical Performance
- Applied Research on Foamed Asphalt Cold-Regenerating Technique in Overhaul Engineering of Binshi Expressway
- The Flowability and Adsorption of Low Sulfate Cement with Superplasticizers
- Hydration Kinetics and Microscopic Analysis of Calcium Oxide Expansion Clinker
- An Innovative Admixture to Enhance the Fresh Properties of Slag Pastes
- Bond Properties of Ceramic Concrete Reinforced by Bamboo Bar
- The Properties of High-Strength Concrete Containing Super-Fine Fly Ash and Limestone Powder
- Several Common Retarders on Performance of Ultra-Early-Strength Grouting Material
- Early Strength Agent on the Properties of Reinforcement Materials Research
- The Influence of Super-Fine Steel Slag on the Properties of High-Strength Concrete
- Research on Secondary Cooling Technology for Billet of HRB500E Vanadium-Containing Steel Rebar
- Study on Hybrid Fiber Reinforced Lightweight Aggregate Concrete
- Study on Rubber Particles Modified Concrete
- Application of Diatomite Modified Asphalt
- Laboratory Research on Aging Properties of Recycled SBS Modified Asphalt
- Simulation of Numerical Test of Concrete Microscopic Structure by Second-Order Manifold Method
- Experimental Research on Fireproofing Measure of Beams Strengthened by Carbon Fiber Sheet Bonded with Inorganic Adhesive
- Optical and Micro-Mechanical Properties of Ag-Based Low-E Glass by Magnetron Sputtering
- Thermal Performance Study of Core Board of Metal Sandwich Thermal Insulation Board on Ecotect
- Research on Finite Element Model for Parallel to Bamboo Culms Axial Shear
- Research on Multivariate Composite Super early Strength Grouting Materials
- Research on the Compound early Strength Agent to the Performance of Super High early Strength Grouting Material
- Research on Damage Characteristics about Reinforced Concrete Circular Pipe Culvert
- Electro-Migration Corrosion Inhibitors for Chlorides Induced Corrosion in Reinforced Concrete
- Mesoscopic Numerical Simulation of Temperature Crack with Non-Uniform Temperature Distribution in Concrete
- Numerical Simulation on PPFRC with Different Contents
- Chapter 13: Seismic Engineering
- Seismic Performance Evaluation of Large Span Cable-Stayed Bridges
- Large-Span Cable-Stayed Bridge Seismic Response Analysis Considering Traveling Wave Effect
- Seismic Damage of Suspended System in Lushan Earthquake
- Research Status for Nonstructural Components under Severe Earthquake
- Research of Random Seismic Response of Large-Span Multi-Tower Cable-Stayed Bridge
- Verification of Seismic Safety Evaluation Program LSSRLI-1 Using Exact Solution
- Difference between Two Seismic Response Analysis Programs for Soft Site
- Evaluation of N-M Model on Simulating Seismic Response of High-Rise SRC Structure
- The Influence of Stress Drop on Synthesized Ground Motion
- The Stability of Ground Motions Randomly Synthesized for an Engineering Site
- Research on Static Stress Triggering and Seismicity in Minxian and Adjacent Area, Gansu
- The Amplification Effect of Soft Site Based on Records from Borehole Arrays
- Application of Post-Stack Seismic Inversion in Discription of the Reservoir Distribution
- Numerical Simulation Analysis on Seismic Behavior of Tow-Story Websteel
- Numerical Analysis on Seismic Behavior of RC Frame with Different In-Filled Panels
- Research on Material Damage Limits of RC Components for Performance-Based Seismic Design and Assessment
- Examination of CPT-Based Liquefaction Evaluation Methods for New Zealand Earthquake
- Research on Regional Dividing Technology for Liquefaction Based on ArcGIS
- Chapter 14: Architectural Design and Theory
- Research of the Economical Campus Construction in Hangzhou
- Protection of the Sichuan Earthquake Ruins Landscape Resources
- Study on Disaster Prevention Index System and Evaluation Method of Large Commercial Building
- Study on Architectural Design for Indoor Space of Small Area House
- Analysis on the Space Characteristics of Shanxi Private Gardens in Ming and Qing Dynasties
- The Influence of Social Class in Human Settlements - Take Yen Hsi-Shan's Former Residence and Zhang Jiata Villages as an Example
- Museum Exhibition Space Analysis Based on Tracing Behavior Observation
- Study of Traditional Architectural Form Adapt to the Mountain Environment Research - Zhang Jiata Ancient Village in Fangshan County of Shanxi
- Analysis of Shanxi Traditional Local-Style Dwellings
- Brief Analysis of Settlement Patterns in Taiyuan County in Ming Dynasty
- Chapter 15: Composites and Polymers
- Analysis of In-Plane Equivalent Elastic Modulus of Aluminum Honeycomb Cores Based on Finite Element Method
- The Influence of Reactive Diluents on the Properties of UV Dual Cured Polyurethane-Modified Epoxy Monoacrylates Films
- Applied Research of the Modifying Agent of Rubber Plastic Composite (MaR) in Asphalt Mixture
- Study on the Thermodynamics and Dynamics of In Situ Ni-Al/Al Reinforced Aluminum Matrix Composite
- Preparation and Property of Waterborne Polyurethane Waterproofing Composites
- Polymerization and Chiroptical Behavior of N-[o-(4-isopropyl-4,5-dihydro-1,3-oxazol-2-yl) phenyl] Methacrylamide
- Preparation of a Net with the Function of Sand-Resistance and Sand-Fixation
- Cross-Linked Alternately Copolymerized Electrolyte Poly (styrene-a-maleic ester) Synthesized through Solvent-Free Strategy
- Corrugated Board Flute-Shaped Finite Element Analysis and Optimization
- Preparation and Anti-Corrosion Performance of Conductive Copolymer (aniline-co-pyrrole)/TiO2 Composite
- Mechanism of Micro-Void Initiation in Composite Materials during VaRTM Process According to the Pressure and Thickness of the Impurity
- Chapter 16: Micro / Nano Materials
- Non-Linear Modeling of Single-Walled Carbon Nanotubes
- Production and Properties of Mononuclear Microcapsules Encapsulating Cinnamon Oil by Complex Coacervation
- Influence of Free Volume on Residual Solvents of SiO2 Modified Polypropylene Films
- Preparation of the Al2O3/3Y-TZP Ceramics by Microwave Sintering under Low Temperature
- Direct Growth of Graphene on SiO2 by Using Ga-Ni Flux
- Synthesis of Monodispersed Lauric Acid Capped Silver Nanoparticles by Wet-Chemical Reduction Method
- Chapter 17: Metal and Alloys
- Investigation of Structure and Performance of SAE4330 Steel
- Crystallization Kinetics Analysis and SPS Consolidation of Mechanical Alloyed Fe79Ti16P5 Amorphous Powders
- Assessment of Fatigue Life of Ni-Ti Samples Prepared by Different Techniques
- Study on the Dynamic Recrystallization Critical Stress of AZ91 Magnesium Alloy
- Influence of P2O5 and Al2O3 on Mineral Formation in Converter Slag
- Influence of Ti to the Microstructure and Mechanical Properties of Al-12Si-3.2Cu-1Mg-2.4Ni Piston Alloy
- Fatigue Characteristic of Aluminum Alloy Plates with Different Thickness
- Study on the Microstructure and Properties of Low Cost TiFeAl Alloy
- Research on Grain Refinement Effect of Al-5Ti-C Alloy on Pure Aluminum and its Attenuation Mechanism
- The Effect of Initial Microstructure on the Dynamic Mechanical Behavior of Titanium Plate at Different Strain Rates
- Pressure-Induced Tunable Magnetism and Half-Metallic Stability in Co2FeGa Heusler Alloy
- Influence of Extrusion Ratio on Microstructures and Properties of Cu-17Ni-3Al-X Alloy
- Effect of Cooling Velocity and Casting Temperature on Solidification Microstructure of Pure Al Refinement under Al-5Ti-B Alloy
- The Study on Properties of Soluble Alumina Based Ceramic Cores
- Chapter 18: Biomaterials and Biotechnology
- The Adsorption Isotherm Studies of Orange Peel on Pesticide Furadan
- Morphology and Performance Analysis of Alpaca and Cashmere Fiber
- Heterogeneous Method for Grafting of Syringaldehyde onto Chitosan by Laccase Oxidation
- Distribution Characteristics of Heavy Metals in EPS and Cells
- Effect of Different Winemaking Technologies on Quality in Cabernet Sauvignon Red Wines
- Effect of Multiple Gas Media Package on Preservation of Fresh Sweet Corn at Room Temperature
- Development of the Reliable Fluorometric Assay for the Sensitive Determination of Nitric Oxide Metabolites in Biological Fluids
- Chapter 19: Materials Processing Technology and Chemical Engineering
- Accelerated Seeded Precipitation Pre-Treatment for the Improvement of Reverse Osmosis Membrane
- Study on Metal Transfer and Welding Spatter Characteristics of Basic Flux Cored Wire
- Influence of Plasma Treatment on Size Adhesion Strength to Raw Cotton Yarns
- Linear Rock Cutting with SMART*CUT Picks
- Study on the Abrasive Wear of Ceramic Piston Rings and the Different Cylinder Bore
- Study on Welding Deformation of 304 Stainless Steel Plate with Different Thickness
- Coating of Fe-Mn-Si Shape Memory Materials on AISI 304 Stainless Steel by Laser Cladding Method
- Effect of Annealing on Properties of the TiN & TiAlN Coatings Deposited on Powder Metallurgy High Speed Steel ( S790 )
- A Novel Method for Preparing Biomimetic Oleophobic Surface on X70 Pipeline Steel
- Preliminary Study on Temperature Field of a Cylinder Circumferential Surface under Laser Spiral Scanning Quenching
- Copper from Copper Smelting Slag by Oxidation Leaching
- Numerical Research on Implosion of Condensed Liners Used in Study of Shock Adiabat of Materials
- Preparation of Ceria from Bastnaesite with NaHCO3 as Fluoride Retention Additive
- Experiment on the Performance of Filtration by Ceramic Media
- The U-Bending Forming of Aluminum Foam Sandwich Panels
- Study on the Preparation of Rich Hydrocarbon Bio-Diesel from Cornus wilsoniana Vegetable Oil with High Temperature Catalytic Cracking
- Catalytic Cracking of Cornus wisoniana Oil to Liquid Bio-Fuel Oil Using KF/CaO as a Solid Base Catalyst
- Measurement and Correlation for Solubilities of 2,4-D Acid in Ethanol-Water
- Study on the Catalyst Performance on Cornus wisoniana Oil Catalytic Cracking Prepared Biological Fuel Oil
- Composition - Property Relationships of Magnetic Inks for Screen Printing
- Catalytic Gasification of Lignin in Supercritical Water
- Microwave-Assisted Secondary Synthesis of NaA Zeolite Membranes Grown on ZrO2 Substrate
- Chapter 20: Information Technologies and Computational Algorithms
- Study on Cloud Data Destruction Mechanism and its Application
- Study on Collaborative Learning System Design Based on Web Platform
- Preparation of Target CETP in Docking-Based Virtual Screening
- Existence of Anti-Periodic Solution for Delayed Cellular Neural Networks with Impulsive Effects
- A Windowed Range Migration Imaging Algorithm for Ground Penetrating Radar Applications
- An Improved Iteration Back Projection Imaging Technique for Surface Penetrating Radar Applications
- Chapter 21: Engineering Management
- Multi-Level Automotive Service Performance Evaluation Model
- Research on Cost Risk Identification of Metallurgical EPC Project
- Manufacturing Industry Structure and Export-Import Development of Chinese (2007-2012)
- Eco-Criticism and Urban Ecological Civilization
- Development Trend of Food Packaging Materials
- The Optimization of Slotting Based on the Power Drive-Through Rack
- A Case Study of English Language Learning Strategies for University Students of Engineering Design Specialty
Les mer
Produktdetaljer
ISBN
9783037859841
Publisert
2014-03-12
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
3050 gr
Høyde
240 mm
Bredde
170 mm
Dybde
82 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1630