Advances in Materials and Materials Processing V
Heftet /
2015
/ Engelsk
Produktdetaljer
ISBN
9783038354314
Publisert
2015-04-28
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1820 gr
Høyde
240 mm
Bredde
170 mm
Dybde
50 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1000
Collection of selected, peer reviewed papers from the 2014 5th International Conference on Advances in Materials and Manufacturing (ICAMMP 2014), December 20-21, 2014,Fuzhou, China.
The 192 papers are grouped as follows:
Chapter 1: Composites;
Chapter 2: Low-dimensional and Nano-Materials;
Chapter 3: Metal-based Materials and Alloys;
Chapter 4: Building and Construction Materials;
Chapter 5: Biomaterials and Technologies;
Chapter 6: Chemical Materials and Technologies;
Chapter 7: Material Testing, Characterization and Applications;
Chapter 8: Surface Engineering and Coating Technology;
Chapter 9: Materials Processing Technology and Applied Research
Les mer
<p>Selected, peer reviewed papers from the 2014 5th International Conference on Advances in Materials and Manufacturing (ICAMMP 2014), December 20-21, 2014, Fuzhou, China</p>
- Preface and Committee
- Chapter 1: Composites
- Analysis of the Geometry and Microcracks of Kevlar/Epoxy Composites
- Effect of Diamond Shape on Surface Roughness of Diamond/Cu Composites
- Effect of Diamond Shape on Thermal-Physical Properties of Diamond/Cu Composites
- Effects of Sintering Temperature on Microstructure and Wear Properties of Al2O3 Particle Reinforced Al Composites
- Preparation of Nickel-Based Al2O3-TiB2 Composite Ceramic Powder
- The Influence of Sintering Temperature and Whisker Content on the Flexural Strength of Aluminum Borate Whisker Reinforced Aluminum Phosphate Composite Materials
- The Study of Composite Material of Al-C System
- Chapter 2: Low-Dimensional and Nano-Materials
- Atomistic Simulation on Buckling Behavior of Monolayer Graphene
- Modeling and Simulation for Current-Illumination Characteristics of Carbon Nanotube
- Preparation and Thermal Fatigue Behaviors of Silicon Nitride Nano-Ceramics
- Study on Dispersion and Rheology of Particles in Water-Based Nano TiN Fluid
- Transmission Performance of Water-Based Nano Fluid Based on Computational Fluid Dynamics
- β-Cyclodextrin Modified Hybrid Magnetic Nanoparticles as an Adsorbent for Phenol Removal
- The Preparation of ZrO2 and the Influence of the Calcination Temperature
- The Synthesis of Single-Crystal BiOI Nanoplates with {001} Facets Exposed
- Chapter 3: Metal-Based Materials and Alloys
- A Study on Mechanical and Fatigue Properties of a Stainless Steel
- Development of 590MPa Grade Hot-Dip Galvannealed DP Steels
- Effect of Annealing Temperature on Microstructure and Damping Capacity of Twin Roll Cast ZK60 Alloy
- Effect of Ca and Nd Alloying on the Microstructure of Mg-6Al-Ca-Nd Alloy
- Effect of Cu on the Electrochemical Corrosion Behavior of Sn-8Zn-3Bi Lead-Free Solder Alloy
- Effect of Electropulsing Rolling on the Microstructure and Properties of Industrial Pure Titanium TA1
- Effect of Er on Microstructure and Hardness of Al-Zn-In Alloy
- Effect of Grain Size on Microstructure and Orientation of Fe-25Mn-3Si-3Al Steel
- Effect of Nd on Primary Silicon and Mechanical Properties of Hypereutectic Al-17.5%Si Alloy
- Experiment and Analyses on 16 Mn Steel under Cyclic Loading Controlled by Strain
- Experimental Study on the Effect of Retained Austenite on the Impact Toughness of a Low-Carbon Martensite Steel
- Galvanic Corrosion of 70-30 Copper-Nickel Alloy in Contact with Nickel-Aluminum Bronze in Simulated Deep Sea Environment
- High Temperature Oxidation Investigation of Hot Roll Material with High-Speed Steel
- Influence of Neodymium on Wear Resistance of Hypereutectic Al-Si Alloy
- Influence of Pre-Deformation Strain on Recovery Performance of Ni47Ti44Nb9 Alloy Φ8mm Pipe Joint
- Influence of Solution Treatment on the Microstructure and Mechanical Properties of an Deformed Al-12.7Si-0.7Mg Alloy
- Investigation on the Property of High Si-Al Alloy Prepared with Ultrasonic Vibration Aided Casting Technology
- Isothermal Crystallization Behavior of Cu42Zr42Al8Ag8 BMG Investigated with Electrical Resistance Measurement
- Liquid-Phase Separation of Undercooled Fe-Cu-Si Alloy
- Manufacturing Technology Research of Magnesium Alloy Transmission Case
- Measurement of TTP Curves of 7050 Aluminum Alloy by Conductivity
- Micromechanics Analysis of Elastic Modulus of Alumina-Carbon Refractories
- Modification of Hypereutectic Al-20%Si Alloy by Neodymium
- Research on Heat Resistance of As-Cast Ferritic Nodular Iron
- Study on High-Temperature Mechanical Properties of SPHC Steel Produced by CSP Technology
- Study on Microstructure and Property of High Boron Alloyed Stainless Steel Composite Plate Containing Titanium
- Study on Multi-Alloy Ingots Produced Using Hot-Top DC Casting Approach
- Test and Research on Ratchet Effect of 16 Mn Steel under Cyclic Loading
- The Feature of Slag from Complex Hot Metal Blown by Converter Processing and its Influence on the Craft
- The Phase Structures and Properties of Pt-Ir-M (M=Zr, Mo, Y) System
- Determination of Al, Cu, Ni in Zr-Based Amorphous Alloy by Inductively Coupled Plasma Atomic Emission Spectrometry
- Ti-Al-Zr-B-Y Amorphous Alloy Powders Prepared by Mechanical Alloying
- Chapter 4: Building and Construction Materials
- Comparison and Analysis of RC Beams Strengthened with FRP Bonded on the Side and Bottom Surface
- Effect of Basalt Fibers on Rheological Property of Asphalt Mortar
- Experimental Research on Anti-Cracking Ability of Polyacrylonitrile Fiber Mortar
- Experimental Study of Influences of Initial Temperature on Cement Grout Performance
- Impact of Composite Mineral Admixture on Carbonization Resistance of High Performance Concrete
- Influence of Layered Materials on Properties of Cement Stabilized Macadam
- Inversion of Material Parameters of Composite Fiberglass Box Structure
- Mechanical Properties of High Strength Desert Sand Concrete
- Nonlinear Structural Analysis of Fire-Exposed Reinforced Concrete Column
- Research on Separation and Regeneration Aggregate of Recycled Asphalt Mixture Road Performance
- Comprehensive Evaluation of Asphalt-Mixture Performance Based on Principal Component Analysis
- Chapter 5: Biomaterials and Technologies
- A Comparison of Gelling Properties Stability of Dry-Heating and Maillard-Type Egg White Proteins
- Fabrication an Antibacterial Surface on Composite Porous Scaffold
- Investigation of the Surface Modification on Biomedical Magnesium Alloy
- Nonenzymatic Glucose Electrochemical Oxidation Based on Pt Decorated MWCNTs-PVA Hybrid Electrode
- RSM as an Approach to Optimize Ginger Intermittent Microwave Drying Process
- Study of the Degradation Behaviour of Biomaterial Mg-4.0Zn-2.0Sr Alloy in SBF
- Synthesis and Characterization of the Bio-Based Oligomer
- The Influence of the Addition Element of Zn and Sr to Degradation Behavior of Pure Magnesium
- Electrospun Hydroxyapatite/BMP-2 Grafted PLLA Nanofibers for Guided Bone Rebuilding Scaffold
- Chapter 6: Chemical Materials and Technologies
- Effect of Dimethyl Sulfoxide (DMSO) on Cellulose Solution with High Concentration
- Flexible Graphene Paper as a Binder-Free Anode Material for Lithium Ion Batteries
- Highly Selective Separation and Enrichment of Phosphopeptides by Uranyl-Salophen Immobilized Silica Gel Material
- Influence of Co(ii) Ionic Liquids Catalytic System for Polycarbonate (CHO/CO2) Synthesis
- Preparation of Sodium Paeonolsilate Intercalated into Layered Double Hydroxides and its Release Properties
- Preparation of Zeolite from Waterworks Sludge for Ammonium Ion Removal in Wastewater
- Radical Polymerization of a Novel Methacrylamide Derivative
- Simulation Study of the Volume Properties and Diffusion of 1-Butyl-3-Methylimidazolium Tetrafluoroborate/Ethanol Mixture
- Sorption of Pb(II) on Iron Hydroxide Modified Diatomite
- Synthesis and Application of the Three-Component Lyotropic Liquid Crystal
- Synthesis and Characterization of Thiol Functional Cyclic Carbonate
- Synthesis and Crystal Structure Hindered Amine with Methaerylate
- Synthesis of Hyperbranched Polyphenylacetylene Resins and the Influence of their Molecular Architecture on their Properties
- The Application of Dye Materials on Efficient Visible Light Photocatalysis
- Biomineralization-Inspired Synthesis for Hierarchical Structured ZnO Powders with Enhanced Potocatalytic Activity
- Evolution of Phase Structure and Micro-Morphologies of the La0.7M0.3MnO3 (M=Ca, Sr) Sintered at Different Temperature
- Study of Salen(Al) Complex Catalytic System in Ring-Opening Polymerization of Lactide
- Conversion of Chitosan into 5-Hydroxymethylfurfural via Hydrothermal Synthesis
- Density Functional Studies on the Standard Heats of Formation for Nitroaromatic Molecules
- Influence of Cadmium Oxide on Thermal Hazard of AP-CMDB Propellants
- Swelling Kinetic Study of Poly(Vinyl Alcohol)/Poly(γ-Glutamic Acid) Blend Hydrogel
- Chapter 7: Material Testing, Characterization and Applications
- Analysis of Impact of Moisture Content on Rock Thermal Conductivity Coefficient Using TCS Method
- Effect of Surface Treatment on the Stress Corrosion Cracking of 304 Austenitic Stainless Steels in Acid Chloride Solution
- Fatigue Properties and Fracture Characteristics of the Aluminum Alloys for High-Speed Train Carbody
- Influence of Predeformation on Mechanical Behavior of Hastelloy C-276
- Iron Temperature Field Finite Element Analysis and Measurement Verification
- Lifetime Estimation of Chain Plates for Floodgates Working in Seawater by Continuum Fatigue-Creep Damage Theory and Transient Analysis of Diffusion Process of Hydrogen
- Qualimetric Evaluation of Aluminum Wire Deformed by a Combined Scheme of Deformation “Pressing-Drawing”
- Strength Testing of Fabric Composite Material and Impact Simulation for Airbag Landing System
- Study of Influence Factors on Medium-Density Fiberboard Thermal Analysis
- Study on Testing Methods for Thermophysical Properties of Materials
- The Estimation of the Thermal Properties of Refractory Materials According to the Temperatures Acceleration Curve at the Blast Furnace Blowing-In
- The Evaluation of Absorption Performance of Magneto-Rheological (MR) Elastomer
- Non-Linear Finite Element Analysis on Rubber O-Sealing Ring of SRM
- Preparation Method and Device of Microcellular Sheet Based on Batch Foaming
- The Effect of Laser Power Density on Laser Covered Graphene
- Elastic-Plastic Constraints Analysis for Hole-Edge Crack
- Study on Phenolic Foams Modified by Graphene Oxide
- Experimental Research about Polyester Viscose Seat Fabric Water and Oil Repellent Finishing
- An Experimental Study of Compatibility for Metallic Inserts Bonded into CFRP Laminates Soaked in Aircraft Fuel
- The Method of Two-Dimensional Stretching to Reduce Residual Stress in Quenched Thin-Walled Aluminum Alloy
- Application Reseach of Oriental Silicon Steel Sheet Used in the Table Motor
- Investigation on Compression Properties of Syntactic Foam Reinforced by Warp Knitted Spacer Fabric
- New Aluminum Plated Corrugated Cardboard Material and Application
- The Lightweight Design and Simulation of Hydraulic Steel Gate with Metal Sandwich Construction
- Mathematic Model of Liquidus Temperature in Quaternary Aluminum Phase Diagram
- Research and Application of Model Materials Based on Soft Rock Model Test
- Soft Soil Subgrade Vacuum Preloading Consolidation Deformation Analysis of Large Rigid Foundation
- Compression Performance of Composite Stiffened Panels with Scarfed Holes and Scarfed Bonded Repairs
- Loading Tests of Thin Plates Made of Ultra-High Performance Concrete Reinforced by PVA Fibers and 2D Textile Glass Reinforcement
- Erosion Study of Silica Phenolic Nozzles with Graphite Inserts in Solid Rocket Motors
- Study on Constitutive Equation of 7085 Aluminum Alloy under High Deformation Temperature
- Microwave Dielectric Properties of (Ca0.8Sr0.2)x(Li0.5Nd0.5)1-xTiO3 Ceramics
- Chapter 8: Surface Engineering and Coating Technology
- A Comparison of the Complex Wettability between Locust and Moth Wing
- An Improved Indentation Method for Estimating Limits of Fracture Toughness in Brittle Films
- Effect of Y2O3 on Microstructure and Oxidation Behavior of Aluminide Coating on Ni-Based Superalloy
- Effects of Nano Silver Film on the Hydrophobicity of Moth Wing
- Microstructures and Mechanical Properties of Aluminum Coating Produced by Friction Stir Processing
- Ni-Cr-Al Coating Layer Modified by Friction Stir Processing - Analysis of Microstructure and Element Diffusion
- Research on Induction Cladding Alloy Layer on the Surface of Steel Parts and its Performance
- Research on the Modification of Water-Borne Inorganic Zinc-Rich Coatings and its Performances
- Study on Macroscopic Morphology, Microstructure and Hardness of F313 Iron-Based Coatings Prepared by Laser Cladding Using Different Powder Feed Rate
- The Effect of Scanning Power on AISI 434L Stainless Steel-Based Composite Laser Cladding Coatings
- The Influence of CTAB Surfactant on the Dispersion of Al2O3 Particles and Deposition Rate of Electroless Ni-P-Al2O3 Coatings
- The Morphology in Film of Polystyrene-b-Polylactide after Temperature Annealing Process
- The Role of Hierarchical Micro-Morphology in the Wetting Property of Moth (Geometrinae) Wing Surface
- Study on Wear Mechanism of an AlSi–Hexagonal Boron Nitride Abradable Seal Coating
- Preparation and Properties of Water-Based Ultra-Thin Fireproof Coating for Steel Structures
- Structure and Field Emission Properties of CNx Powders Synthesized by a Polymerization Process
- Chapter 9: Materials Processing Technology and Applied Research
- A New Hot Stamping Process with Quenching and Partitioning Treatment
- Analysis of Microstructure and Mechanical Properties of 2A97T3 Al-Li Alloy Fiber Laser Welding Joint
- Analysis of Stress and Strain on Shaft Parts for Closed Type of Cross Wedge Rolling during Stretching Stage
- Analysis of Transverse Flatness Distribution of Steel Plate during the Quenching Process
- Analysis on the Welding Thermal Field and Residual Stress of Thick Plate
- Application Research of Hot Stamping Base on the Forming History
- Calculation Method of Laser Spot Coincidence Degree of Laser Micro Machining
- Comparison of Stress Filed and Deformation of MAG and TIG for Cr13 Based on Finite Element
- Development and Application of Process Control System to the Pilot Hot Rolling Mill
- Development and Research of Pressing Technology of Billets in New Design of Equal Channel Step Matrix
- Effect of Deformation Temperature on Microstructure Evolution for 20CrMnTiH Steel during Hot Compression
- Effect of Edge Masking on Residual Stress of Hot-Rolled Strip on Run-Out Table
- Experimental Study on Cryogenic Gas Atomization Jet Cooling Difficult-to-Cut Material
- Experimental Test on Continuous Drying Sintering Apparatus by Heating Roller Type
- Grafting Polypropylene under Ultrasonic in Water Suspension System
- Influence of Plasma Torch Nozzle Design on Plasma Arc Analyzed with Finite Element Method
- Influence Rules of Technological Parameters on End Quality in Closed Cross Wedge Rolling (CWR)
- Investigating the Application of Ultrasonic Welding Technology in Waterproof Composites
- Kinetics Analysis on Process of Direct Smelting and Alloying between High-Carbon Ferrochrome and Molybdenum Oxide
- Metal Turning Mechanical Model of Machined Surface Roughness
- Noise Analysis of Diamond Saw Blade
- Numerical Simulation of Distortion of Rectangular Tube with Multi-Point Stretch Bending
- Numerical Simulation of the Dynamic Stress Field Based on DEFORM in the Friction Stir Welding of Al Alloy
- Optimization of Rolling Modes on the Mill 1700 of JSC "ArselorMittal Temirtau" with Aim to Increase Quality of Sheet Rolled Products
- Parameter Optimization for Grinding Process of Micropores with High Aspect Ratio
- Parameters Research of Precise Straightening Process in Roll Straightener
- Pass Design and Finite Element Simulation for Trapezoidal Stainless Steel Sieve Bar
- Quality Cost Analysis of Typical Forging Based on SPC and DEA Model
- Radius Compensation in Lateral Bending of L-Shape Plate Considering Rollers Deflection
- Research and Application of Milling Parameters Optimization Based on Genetic Algorithm
- Research and Development of Precision MIG/MAG Welding
- Research of Fused Deposition Modeling Process Oriented Component Design
- Research on Dynamic Recrystallization Behavior of Extra-Heavy Backup Roll Forming Process
- Research on Stable Forming of Titanium Alloy Bar Using Three-Roll Skew Rolling
- Research Progress in Technology of Diamond Cutting Tools
- Simulation on the Temperature Field of Milling Roller Using Fluent Software
- Simulation Study on the Force of Particles Migrating in Molten Metal under High-Frequency Magnetic Field
- Springback Analysis of Thin-Walled Stainless Steel Bellow in Hydroforming
- Study on the Microstructure and Property for T-Joints of Al-Li Alloy Welded by Double Sided Synchronization Fiber Laser
- Study on Tool Wear in Green Milling Ni-Based Superalloy
- Study on Welding-Seam Characteristics and Formation of Tailor-Welded Blanks with Big Unequal Thickness
- The FEM Analysis for Feed Rate of Plate Multi-Point Composite Incremental Forming
- The Influence of Metal Surface Roughness on Bonding Strength of Metal and Composite Material
- The Research on Diameter Growth of Deep Groove Ball Bearing Inner Ring in Cold Rolling Process
- The Research on the Generated Mechanism about the End Concavity of Shaft in the Closed Type of Cross Wedge Rolling
- Velocity Control with SGARC 440 Alloy in the Roll Forming Process
- Simulation of the Surface Roughness by End Face Grinding Wheel with Ordered Abrasive Pattern
- Effect of Different Methods on Properties of SMA490BW Steel Welded Joints
- Microstructure and Mechanical Properties of Electron Beam Welded 5A90 Al-Li Alloy
- Study on the Microstructure of Thermoforming
- Study on Typical Metal Forming Pattern of Ultrasonic Vibration Assisted Upsetting Process
- Finite Element Simulation for Laser Deposition Process of Graphite Copper Gradient Composite of Thermal Stress
- Numerical Simulation of Distribution Characteristics of Electromagnetic Field for Round Billet with Mold Electromagnetic Stirring
- Effect of Load Direction on Failure of Out-of-Plane Composite Joints
- Research on the Low Cycle Fatigue Properties of PC/ABS Blend
- Effect of Equal-Channel Angular Pressing Passes on Corrosion Behavior of Ultrafine-Grained Pure Iron
Les mer
Produktdetaljer
ISBN
9783038354314
Publisert
2015-04-28
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1820 gr
Høyde
240 mm
Bredde
170 mm
Dybde
50 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1000