/

Advances in Materials and Materials Processing IV

Jiang, Zheng Yi Liu Xianghua Han, Jing Tao
Heftet / 2014 / Engelsk

Produktdetaljer

ISBN
9783038350149
Publisert
2014-05-01
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
2640 gr
Høyde
240 mm
Bredde
170 mm
Dybde
71 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1416

Redaktør
Jiang, Zheng Yi
Liu Xianghua
Han, Jing Tao

Advances in Materials and Materials Processing IV

Jiang, Zheng Yi Liu Xianghua Han, Jing Tao
Heftet / 2014 / Engelsk
Jiang, Zheng Yi Liu Xianghua Han, Jing Tao
Heftet / 2014 / Engelsk
Nettpris:
5.608,-
Levering 7-20 dager
Sjekk lagerstatus i butikk

Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the 2013 4th International Conference on Advances in Materials and Manufacturing (ICAMMP 2013), 18-19 December, 2013, Kunming, China.
The 268 papers are grouped as follows:
Chapter 1: Composites,
Chapter 2: Micro/Nano Materials,
Chapter 3: Steel/Iron,
Chapter 4: Ceramics,
Chapter 5: Metal Alloy Material,
Chapter 6: Optical / Electrical / Magnetic Materials,
Chapter 7: Energy Materials,
Chapter 8: Biomaterials and Technology,
Chapter 9: Chemical Materials,
Chapter 10: Film Material,
Chapter 11: Building Materials,
Chapter 12: Materials Mechanical Behavior and Fracture,
Chapter 13: Materials Physics and Chemistry,
Chapter 14: Selection, Testing and Evaluation of Materials,
Chapter 15: Surface Engineering / Coatings Technology,
Chapter 16: Material Forming,
Chapter 17: Material Machining,
Chapter 18: Welding and Joining,
Chapter 19: Materials Processing Technologies

Les mer

Selected, peer reviewed papers from the 2013 4th International Conference on Advances in Materials and Manufacturing (ICAMMP 2013), 18-19 December, 2013, Kunming, China

  • Preface and Conference Organization
  • Chapter 1: Composites
  • The Study on Synthesis and Impact Properties of Novel Dual Polymerization of Epoxy Composite Materials to Green Production Process
  • Investigation of the Thermal and Optical Properties of Photopolymerizable Resin Enforced by Nanopowder in the Green Production Process
  • Analysis of Micro Structure and Elastic Property on 3-D Tubular Woven Carbon Fiber Composite
  • Effects of CeO2 Addition on Mechanical Properties of LaB6/B4C Composites
  • On the Damping Properties of a Polyurea Elastomer
  • Preparation and Characterization of Phosphorus Removal Agent by Lanthanum-Copper Composite Oxide
  • Microstructure and Properties of the Dispersion-Strengthened Cu-ZrO2 Composite for Application of Spot-Welding Electrode
  • Study on the Mechanical Properties of Steel - Polyurethane Tube
  • The Study of Impact Rule of Si Element on Cu/Al Composite Interface Compounds
  • Preparation and Thermal Properties of Polybenzoxazine/TiC Hybrids
  • Study on the Surfactant/Polymer Combination Flooding Relative Permeability Curves in Offshore Heavy Oil Reservoirs
  • Analysis of Composites for Best Designs of Refractive Solar Concentrators
  • Experimental Investigation into Spall of Carbon Phenolic Composites
  • Study on CF Reinforced Interface Properties of PES-C Resin Matrix Composite
  • Thermal and Mechanical Properties of Aluminate Cementitious Functional Materials Enriched with Nano-SiO2 for Thermal Energy Storage
  • Model I Interlaminar Fracture Toughness of Carbon Fiber Reinforced Polymer Matrix Composites
  • The Influence of Bi2O3 on SiO2-Al2O3-B2O3-RO Glass Propertiesarts
  • Study of Synergistic Effects of Cerium Oxide on Intumescent Flame Retardant Polypropylene System
  • Chapter 2: Micro/Nano Materials
  • A Copolymerization Modified Acrylate Resin and its Polyhedral Oligomeric Silsesquioxane Composites
  • Design and Experiment of T-Shape Glass Micro-Nozzle for Preparation of Microcapsules
  • Morphology Controllable Preparation of Gold Nanoplates through an Eco-Friendly Wet-Chemical Route
  • Research on the Conductive Property of CNT Nanopaper Facilitates the Actuation in Shape Memory Polymer Composites
  • The Crystallization Research on the Zr-Based Bulk Metallic Glasses by Ion Thinning
  • Influence of Temperature on the Preparation of GaN Nanowires
  • The Effects of Discharge Parameters on the Surface Morphology of Nickel Microspheres by EDM Combined with Ultrasonic Field
  • The Preparation of Porous TiO2 Nanostructure by Triblock Copolymers Co-Templating Method of TiOSO4 Solution Derived from Ilmenite Ore
  • Catalytic Degradation of Phenol by γ-Fe2O3 Nanoparticles
  • Size-Dependence of Photoluminescence Property of ZnO Nanoparticles
  • Controlling the Size and Dispersion of ZnO@SiO2 Core-Shell Nanostructure by Addition of Triblock Copolymer Surfactant and pH Adjustment during Precipitation and Encapsulation Process
  • Enhancing the Fluorescence of Graphene Quantum Dots with a Oxidation Way
  • 2D Assembly of Palladium Nanoparticles and AFM Characterization
  • Blocking Temperature of the System Core-Shell Nanoparticles
  • Growth Environment of Carbon Nanotubes by DC-PCVD
  • Reliable Solvothermal Growth of Diverse Heterostructures Based on CdS Nanowires
  • Hydrothermal Synthesis and Visible-Light-Driven Photocatalytic Activities of Bi2WO6 Uniform Hierarchical Microspheres
  • Chapter 3: Steel/Iron
  • Study of Inclusion’s Source and Character in Different T[O] Content
  • The Influence of Transient Casting on Inclusions in Steel
  • The Optimization of the Temper Technology of Production about Soft Steel
  • Hot Ductility of Low Carbon Nb-Microalloyed Weathering Steel
  • Influence of Heat Treatment on Mechanical Properties and Microstructure of Low Alloy Cast Steel (ZG25MnNi)
  • Effect of Hydrogen Induced Additional Stress on the Influence on High-Strength Steels
  • Influence of Milling Time on Morphology and Properties of Precursor Powders for 9Cr Oxide Dispersion Strengthened Steel
  • A Study on the Microstructure and Hardness Feature of 6CrW2MoVSi Steel after Heat Treatment
  • Microstructure Observation of the Tensile Fractured 430 Ferritic Stainless Steel
  • Influence of Oxide Morphologies on the Galvanizability of the Third Generation Automotive Steel
  • Effect of Heat Treatment Processes on Microstructure and Mechanical Properties of Nb-Ti-Stabilized 430 Stainless Steel Plate
  • Research and Implementation of the Data Fitting Algorithm for Testing the Metallurgical Performance of Iron Ore
  • The Research of Non-Oriented Electrical Steel Processed by Stress Relief Annealing Experiments
  • Designing Q&P Process for Experimental Steel with 0.47 % Carbon Content
  • μRaman Analysis of the Rust Layer on Rusted Cast Iron Artifacts
  • Source of Inclusion in IF Steel End Slabs
  • Multiaxial Fatigue Life Prediction of 50CrVA Spring Steel under Proportional Loading
  • Effect of Austenitizing Processes on Isothermal Quenching Microstructure in Bearing Steel
  • Effect of Carbon Content in Direct Reduction Process of Limonite Iron Oxide to Produce Pig Iron Substitute for Thin Wall Ductile Iron Process
  • Chapter 4: Ceramics
  • Investigation on Electrical Properties of CaCu3Ti4O12-Modified (Na,Bi)TiO3-BaTiO3 Lead Free Piezoceramics
  • Brief Introduction of Microwave Ceramics Developed in our Labs for Dielectric Resonators
  • The Effects of K/Na Ratio on the Electrical Properties of (Li, Sb, Ta) Modified KNN Piezoelectric Ceramics at Reduced Temperature with KNbO3 as Sintering Aid
  • Structure and Performance of Calcined Bauxite
  • Chapter 5: Metal Alloy Material
  • Microstructure and Compression Deformation Behavior in the Quasicrystal-Reinforced Mg-6Zn-2Y Alloy Solidified under Super-High Pressure at Room-Temperature
  • Research on Compressive Behavior and Deformation Heating of 7075-T6 Aluminum Alloy during Hot Compression
  • Aircraft Bearings Fracture Failure Analysis
  • An Experimental Investigation on the Solubility of Zr in Cu-Sn Alloys
  • Grain Structure and Precipitates in Squeeze Casting Al-Li-Mg-Zr Alloy
  • Dynamics of Phase Transformation in Cu-Cr-Zr Alloy
  • Effects of Structures of Zinc/Substrate Interface on Coating Adhesion of Hot-Dip Galvanized DP Steels
  • Cube Texture Formation of Cu-33at.%Ni Alloy Substrates and CeO2 Buffer Layer for YBCO Coated Conductors
  • Research on the Microstructure and Properties of Hypereutectic Al-Si Alloy for Semi-Solid Forming during Heat Treatment
  • Corrosion Behavior of Incoloy 800 in Molten Nitrate Salt
  • Effect of Ti on the Structure and Properties of Cu-15Ni-10Mn Alloy As-Cast Smelted at Atmosphere
  • Influence of Etchants on Phase Morphology of Casting Ni-Based Superalloy
  • The Measured Change in d-Electron of Ni in Ni-7.2at%Ti Alloy Studied by Electron Energy Loss Spectroscopy
  • Effect of Homogenization Annealing on Microstructure and Property of Cu-7.5Ni-5Sn Alloy
  • Effect of Alloying Elements V, Cr and Ni on the Electronic Structure and Mechanical Properties of FeAl from First-Principles Calculation
  • Effects of Additives on the Surface Layers of Boronized TC4 Titanium Alloys
  • Characterization on the Microstructures and Optical Performances of TiO2 Doped with Transition Metals
  • Dynamic Strain - Induced Boundary Migration during Dynamic Recovery at a High Temperature Deformation with a Lower Strain Rate
  • Numerical Analysis of Residual Stresses in Quenched High-Strength Aluminum Alloy Ultra-Thick Plates and their Reduction through Single-Side Cold Compression Method
  • Influence of Three Pattern Materials on the Marginal Adaption of Co-Cr Alloy Inner Crown of PFM Endocrown
  • Chapter 6: Optical / Electrical / Magnetic Materials
  • The Thermally Stimulated Current (TSC) Technique on Evaluating Degradation of ZnO Varistors
  • Design and Analysis of Self-Collimation-Based Photonic Crystal Beam Splitter
  • Electronic Structures and Spectral Properties of 4-Thiophene-1,8-Naphthalimide Derivatives
  • Fabrication of Shape Controllable Micro-Lens Arrays by Drop on Demand Printing on the Glass Micro-Holes Arrays
  • Analysis and Design of Transparent Microwave Absorbing Materials Based on the Destructive Interference at the Microwave Range
  • Characteristics of Slow Light in a Photonic Crystal Coupled-Cavity Waveguide
  • Investigation on p-In0.51Ga0.49As LOPC Mode by Raman Spectra
  • Influence of the Nitridation Time after the Al Pre-Seeded Layer on the Properties of GaN Layer Grown on Si (1 1 1)
  • Growth and Spectrum Properties of Ho:BaY2F8 Crystal
  • Preparation and Surface Modification of SiO2 Particles Used in Electronic Ink
  • The Photoluminescence Enhancement and Stability of Porous Silicon by Cathodic Reduction and Acid Treatment
  • Epitaxial Growth of SiC Epilayers for 10kV Schottky Diodes Using Chloride-Based CVD
  • Microstructure and Compound Developed from the Ce-As-Fe at 1173K
  • Chapter 7: Energy Materials
  • Current Research of Biodiesel Used on IC Engine and Improved Measures of Emissions
  • Hot corrosion resistance of four graphite material in molten Solar Salt
  • Current Situation of the Study on Oxidative Stability of Biodiesel
  • The Study on Oxidation Resistance of SiC Composites Used for Solar Absorber Coating
  • Influence of Activated Carbon to the Hydrogen Storage Characteristics of THF Hydrate
  • The Ni-MH Power Battery Electrode Material Admixture Process Fuzzy Control System
  • Kinetics Studies on Chemical Reaction of Producing Biodiesel Based on Transesterification
  • Chapter 8: Biomaterials and Technology
  • Alpha-Glucosidase Immobilization Based on PMMA/Chitosan Core-Shell Microparticles
  • Antibacterial Activity of the Extracts from Gentiana farreri Balf. f.
  • Research on Compound Bone Oyster Sauce and its Development
  • A Preliminary Study of Crosslinked Alginate-Chitosan Microspheres for Delivery System
  • The Structure Design and Fabrication of Drug Releasing Porous Material
  • The Chemical Swelling Effect on Poplar APMP
  • Effects of Cellulase Treatment on Surface Structure of Fast-Growing Poplar APMP Pulp
  • Vasorelaxation of Rat Aorta Induced by Extract from Clerodendranthus spicatus
  • Glutaraldehyde Cross-Linked Silk Fibroin Films for Controlled Release
  • AMPK and Metabolisms of Glucose and Lipid
  • Isolation and Characterization of Abietic Acid
  • Comparison of Physicochemical Properties of Gelatins Prepared from Different Fish Skins through Hot Water Extraction at Mild Temperature Condition
  • Establishment of a Sensitive Nitric Oxide Bioassay for Bioscreening Application
  • Preparation and Properties and Application of Renewable Source (Palm Oil Polyol) Based Polyurethanes Coatings and its Thermal Stability Improvement by Clay Nanocomposites
  • Production of Liquid Fuel by Catalytic Reformation of Carbohydrates in Energy Crops
  • Physicochemical Characterization of Oxidatively Degraded Calcium Lignosulfonate via Alkaline Hydrogen Peroxide
  • Effects of Uranium (VI) Stress on Growth and Antioxidant System in Chinese Cabbage
  • The Development of the Multi-Functional Wool/Aramid 1313 Blended Fabric
  • Anthocyanins Extracted from Chinese Blueberry and its Anticancer Effects on HepG2 Cells
  • Application of Ferritin Modified Eggshell Membrane in Heavy Metal Ion Uptake and Recovery
  • Preparation and Antioxidant Activities of Peanut (Arachin conarachin L.) Protein Peptides by Bacillus Subtilis Solid State Fermentation Method
  • Optimization of Aflatoxin Production of Aspergillus flavus on Peanuts
  • Study on Antibacterial Mechanism of Hemp Fiber
  • The Effect of Different Salt Additions on the Microstructure of YBCO Synthesized by a Biomimetic Method
  • The Sensory Quality and Textural Property of Ready-to-Eat Sea Cucumber in Storage Period
  • Application of Matlab Data Processing System in Research of Drug Microemulsion
  • Study on Effect of Rice Flour on Isothermal Crystallization Kinetics of Biodegradable Poly(L-Lactic Acid)
  • Finite Element Analysis Based Ultrasonic Elastography
  • Chapter 9: Chemical Materials
  • Technique Status and Prospect of Synthetic Rutile
  • Study on the Physicochemical Properties of the Mixture of Water and 1-butyl-3-methylimidazolium Hydrogen Sulfate Salt Ionic Liquids
  • Function and Application of Calixarene Derivatives
  • Study on the Clean Production Process of Basic Chromium Sulphate
  • To Measure the Absorbance at 328nm by Ultraviolet-Visible Spectrophotometer - an Alternative Pathway to Measure the Activity of Acetylcholinesterase
  • Facile Synthesis and Crystal Structure of N-(3-Cyano-4,5,6,7-tetrahydrobenzo[b]thiophen-2-yl)-2,2,2-trifluoroacetamide
  • Study of Phenyl Phenol Formaldehyde Resin and its Curing Performance of Aniline
  • Preparation and Characterization of High Porosity and High Oil-Absorbent Block CMCS Aerogel
  • Chapter 9: Chemical Materials
  • Theoretical Study on the Isomerization Reaction Mechanism of the Chain-Isomers of N9H9
  • Controllable Preparation Cu2O/AC and Application in Photocatalytic Degradation of Organic Dyes
  • Polymerization and Chiroptical Behavior of Polymethacrylamides Bearing a Bulky Oxazoline Pendant
  • Preparation and Photocatalytic Performance Study of Na+/K+-WO3 by Ultrasonic Micro Method
  • Study on the Strengthening of Kraft Liner Board by the Application of Series WEC Cleaner Papermaking Chemicals
  • Synthesis and Crystal Structure of 4-[5-(2-Bromophenyl)-1,3,4-Thiadiazol-2-Ylthio]-2-(trifluoromethyl)thieno[2,3-d]pyrimidine
  • Experimental Study on the Effective Separation of Chromium-Iron Ions in Multi-Component Solution System by Ihleite Method
  • Preparation of Modified Polyurethane Fiber and Study of its Lead Ions Adsorption
  • Isothermal Crystallization Behavior and Kinetics of Poly (lactic acid) Filled with a Novel Nucleating Agent
  • Study on the Prepartion of Slag Haycite for Phosphorus Removal Using Ammonium Hydrogen Carbonate as Pore Former
  • Preparation and Characterization of Polyurethane Foams from Modified Rosin-Based Polyether Polyol
  • Synergistic Inhibition of Sodium Molybdate and Sodium Silicate on Carbon Steel in KCl Media
  • Chapter 10: Film Material
  • Magnesium Diboride Superconducting Films Synthesized by Different Electron-Beam Annealing Currents
  • Numerical Simulation of Film Thickness Uniformity Deposited by Planar Circular Magnetron Sputtering System
  • Effect of Cobalt Concentration on the Microstructure of Nickel-Cobalt Alloy Deposits
  • Electrochromic Properties of Co3O4/NiO Nanocomposite Films
  • Thermal Stability of Ultralow k Carbon-Bridged Periodic Mesoporous Organosilica Film
  • Study on Preparation of SnO2 Polyacrylate Thermal Insulation Film with Liquid Phase Precipitation Process
  • Investigation of the Preparation of Anodized Nanoporous Alumina Array
  • Morphology and Orientation in Thin Film of Polystyrene-b-Polylactide Prepared by Solution-Casting
  • Biofilm-Electrode Process for Nitrate Removal from Micro-Polluted Water
  • Effective Anisotropy Constant of Bilayer Film
  • Characterization of TiO2 Thin Films Prepared by Vacuum Evaporation
  • Chapter 11: Building Materials
  • Influence of Calcium Carbonate Powder on Water Requirement and Flowability of Self-Compacting Mortar Incorporating Bagasse Ash
  • Development of Reinforced Structure Designed Composite Pavement
  • Design and Experiment on the Road Pavement for Rush to Repair
  • Usage of Steel Slag in Concrete as Coarse Aggregates
  • Usability of Fly Ashes from Czech Republic for Sintered Artificial Aggregate
  • Effect of Surface Modification of Steel Fiber on Concrete Comprehensive Performance
  • Experimental Study of Compression and Carbonation in Concrete Subjected to Freeze-Thaw Environment
  • Effect of Coconut Coir Uniformity on Strength of Unfired Soil Lime Bricks
  • Size Effect on Mechanical Properties of LVL
  • Influence of the Organic and Mineral Additions in the Porosity of Lime Mortars
  • Research on the Mix Design of Cement Asphalt Concrete
  • Effects of Artificial Silica Fume on Compressive Strength and Workability of Self-Compacting Concrete
  • Experimental Research on the Impact Damage of Composite Laminates at Different Energies
  • Chapter 12: Materials Mechanical Behavior and Fracture
  • Deposition Effects on the Ultimate Strength of Tungsten Alloy
  • Study on the Strength Properties of Superior Shoes Board and Furnish
  • A Comparative Study on the Performance of Domestic Cellulose Based Pressboards for Use in Transformers
  • Model of Equal-Stressed Cylinder Based on the Mohr Failure Criterion
  • Fatigue Properties of Titanium Alloy TA11 under Multiaxial Loadings with Tension - Bending Vibration
  • Study of Damage and Acoustic Emission Properties of Rocks under Uniaxial Cyclic Load-Unload
  • Effect of Consolidation with Alanine and Glutaraldehyde on the Properties of Fragile Wool Fabrics
  • The Influence of Temperature and Load on Dry Sliding Wear and Friction Property of Low Metallic Friction Material
  • Study on the Mechanical Property of Nomex Fiber in Different Temperature
  • Analysis of Hot Oil Pipeline Stress Influencing Factors
  • Laboratory Investigation on Mechanical Behavior of Artificial Ice under Triaxial Compression
  • Formulation of Equivalent Plastic Strain Accumulated in Rotating Bending Process of Metal Tubes for Severe Plastic Deformation
  • Study on Development of Hemp Stem-Based Panel
  • Optimization of Superior Shoes Board Immersion Condition
  • The HAM Solutions for Unsteady Boundary Layer Flow and Heat Transfer with Heat Source/Sink
  • Influence of Vibration Stress Relief (VSR) on the Residual Stress and Microstructure in Welded Plate of DH36 Low Alloy High Strength Steel
  • Chapter 13: Materials Physics and Chemistry
  • The Way of Obtain C3H4O+ Fragments Laser-Induced by Cycloheptanone IonExcited State
  • The Pressure of CO2 Crystal Melting Temperature Dependence
  • The Thermal Decomposition Characteristics of Sodium Pyroxenite Gangue in Baiyunebo Iron Ore
  • Corrosion Characteristics of Grounding Grid in Resistance-Reducing Agents
  • Kinetics of Rubber-Modified Nylon 6
  • Research on the Kinetics of Nylon Polymerized by Caprolactam Anionic Polymerization Using Adiabatic Method
  • Skyrmion Excitations in Graphene
  • First-Principles Calculation of the Vacancy Formation Energy in VC
  • Antiplane Response of Cylindrical Inclusion with Eccentric Crack to Incident SH Waves
  • The Characteristic Dissolution and Physical Chemistry Parameter of Synthetic Pyromorphite
  • Mathematical Simulation and Experimental Investigation of Propranolol Hydrochloride Loading/releasing from Ion Exchange Fibers
  • Study of Selected Characteristics of a Dry Cell Hydrogen Generator in Conditions of Long Term Operation
  • An Easy Route for the Preparation of Soluble High Molecular Weight Polymer Under Friedel-Crafts Conditions
  • Pyrolysis Characteristics of Blends from Coal and Polyethylene
  • The Correction Factor in Elastic Modulus Determining by Indentation
  • Shadowgraph of Pulse CO2 Laser Induced Breakdown in Different Pressure Air
  • Thermal Decomposition of Phosphate Ore by Using Differential Scanning Calorimetric Method
  • Chapter 14: Selection, Testing and Evaluation of Materials
  • A Material Selection Method Based on Finite Element Method
  • Research on the Regular between Concentration of Superfine Powder Extinguishing Agent Explosion Scatter and Fire-Extinguishing Ability
  • The Affecting Gene Research of Metal Sheet Drawing Force on Compensate Fuzzy Nerve Net Control
  • The Study on the Pipe Retracting Shape Parameter Identify of Quantum and Immunity Algorithm
  • Parameters Identification of Johnson-Cook Constitutive Equation for Aluminum Brass
  • Quality Control of Materials in Pressure Pipeline during the Installation
  • Application of Distribution of Oxygen Coefficient in Explosive Neutron Detection
  • Research and Manufacture of Tea-Cigarette
  • Fatigue Propagation Life Evaluating for Materials or Components Suffered Load Spectrum by Quantitative Fractography
  • Chapter 15: Surface Engineering / Coatings Technology
  • Studies of Surface Roughening for Sapphire Substrate
  • Review of Conductive Coating and its Application in Power Grounding System
  • Design of a Simple and Demountable Experimental Device for Drag Reduction of Super Hydrophobic Surface
  • Characterization of Microstructure, Phase Composition and Corrosion Resistance of Al-Zn-Si-RE Waterborne Coatings
  • The Application and Analysis of EDM on the Surface Light Trapping Structure
  • Characteristics of Inconel 718 Filler Metal Affecting to Welding Metal Zones of Cast Steel for Piston Crown Material
  • Study on Macroscopic Morphology and Microstructure of Single Ni60 Laser Clad Tracks Prepared Using a Variable Laser Beam Shaper
  • Comparison of Surface Properties of TiN and TiAlN Coating Prepared by Arc Ion Plating for the Improvement of Life-Time Extension of Tool Steel
  • Surface Roughness Study of Milled Carbon Fiber Reinforced Polymer (CFRP) Composite Using 4 mm 2-Flute Titanium Aluminum Nitride (TiAlN) Coated Carbide End Mills
  • Study on the Fractal Behavior and Fractal Characterization of Guide Way Joint Surface
  • Effect of Ca2+ on Structure and Corrosion Resistance of Conversion Coating Formed on Cast AZ91D Magnesium Alloys
  • Surface Modification of Titanium and its Alloys for Biomedical Application
  • Temperature Field Simulation of Laser Heated 1045 Steel Using with Shaped Laser Beam Profiles
  • Chapter 16: Material Forming
  • Temperature Controlling System Design of Non-Isothermal Deep Drawing Mould for Magnesium Alloy Sheet
  • Study on Micro Hydroforming of Metals
  • Application of Mass Scaling Technology in Steel Tube Rolling by Finite Element Simulation
  • The Research on the Simulation Metal Flow in Forging of Bevel Gears
  • Multi-Objective Optimization and Research of Hot Stamping Process Parameters
  • Microstructure Analysis on GMAW Additive Manufacturing Parts Constrained by Electromagnetism
  • Mini-Thixoforming of High-Alloyed CPM REX 121 Steel
  • Characterization of Hot Deformation Behavior of Udimet720Li Superalloy Using Processing Map
  • The Research on Penetration of New Annular MEFP
  • Chapter 17: Material Machining
  • Extracting Acoustic Emission Signal Feature of Grinding Processing
  • Two-Step Identification of Instantaneous Cutting Force Coefficients and Cutter Runout
  • Experimental Research of Workpiece Temperature in Orthogonal Turn-Milling Compound Machining
  • Cutting Force Model for Heat Assisted Titanium Alloy Milling
  • Optimization of Cutting Conditions of YG15 on Finish Cutting in WEDM Based on Taguchi Method
  • The Effect of Cutting Process Parameters on the Stability in Milling
  • Cutting Performance of TiB2/WC/h-BN Micro/nano Composite Gradient Self-Lubricating Ceramic Tool when Machining Carbon Steel
  • Combined Atomistic-Continuum Modeling of Nano-EDM Process
  • Influence on BTA Boring Bar Transverse Vibration Considering Inner Cutting Fluid Velocity and Axial Force
  • Directly Manufacturing Table Tennis Mould by Hybrid Plasma Deposition & Milling
  • The Straightening Scheme Analysis for the Copper-Clad Steel Tube
  • Effect of Alumina Bubbles on Mechanical Properties and Microstructure of Metal Bond for Superabrasive Grinding Wheels
  • Germanium Crystal Anisotropy Affecting to Cutting Force in SPDT
  • The Cutting Parameter Affecting to Surface Roughness in Single-Point Diamond Turning
  • Fast Prediction Model for Closure Pressure in Hot Isostatic Pressing
  • Numerical Simulation of the Orthogonal Cutting of Carbon Fiber Reinforced Composite Material
  • Powder Particles Grinder Mechanism Design and Exploration Tool
  • Chapter 18: Welding and Joining
  • Kinematics Analysis of a 6-DOF Riveting Manipulator Based on ADAMS
  • A Performance Study on Self-Piercing Riveting and Adhesive Hybrid Joints of Different Adhesive
  • A Performance Study of Clinched Joints with Different Material
  • Application of the Laser Welding Technique in Aircraft Repair
  • Microstructure and Hardness of Friction Welded SSM 356 Aluminium Alloy
  • Numerical Simulation of Temperature Fields by Welding of Ti-Al Alloys Applying Volumetric Heat Source
  • Topology Optimization and Robust Analysis of Welding Spot Layout for a Heavy Duty Truck Cab Based on Element Strain Energy Density
  • Study on Arc and Drop Transfer Behaviors of DCEN MAG Welding
  • Evaluation of Welding Metal Zones in the Case Welded with 0.5 Mo Filler Metal to Forged Steel for Piston Crown Material
  • Effect of Heat Treatments on Microstructure and Mechanical Properties of Low Carbon Steel Pipes Welded by Induction Process
  • Chapter 19: Materials Processing Technologies
  • Numerical Simulation on Stress Field in Inside-Beam Laser Cladding
  • The Research on Ceramic Friction and Flow Stress of Plastic Forming
  • 6D Laser Measurement System Based on Double Longitudinal Modes Laser
  • Influence of High Energy Ball Mill Technology on Cube Texture Formation of Ni-8at.%W Alloy Substrates for YBCO-Coated Conductors
  • The Effect of Electromagnetic Pulse Treatment on Thin – Wall Bearing Ferrules Dimensional Accuracy
  • Multi-Objective Optimization for Rolling Schedule of High Strength Sheet Based on ACPSO
  • The Grey Relation Analysis of Hemp Fiber Fineness and Chemical Composition after Plasma Assisted Degumming
Les mer

Relaterte produkter

Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the 2013 4th International Conference on Advances in Materials and Manufacturing (ICAMMP 2013), 18-19 December, 2013, Kunming, China.
The 268 papers are grouped as follows:
Chapter 1: Composites,
Chapter 2: Micro/Nano Materials,
Chapter 3: Steel/Iron,
Chapter 4: Ceramics,
Chapter 5: Metal Alloy Material,
Chapter 6: Optical / Electrical / Magnetic Materials,
Chapter 7: Energy Materials,
Chapter 8: Biomaterials and Technology,
Chapter 9: Chemical Materials,
Chapter 10: Film Material,
Chapter 11: Building Materials,
Chapter 12: Materials Mechanical Behavior and Fracture,
Chapter 13: Materials Physics and Chemistry,
Chapter 14: Selection, Testing and Evaluation of Materials,
Chapter 15: Surface Engineering / Coatings Technology,
Chapter 16: Material Forming,
Chapter 17: Material Machining,
Chapter 18: Welding and Joining,
Chapter 19: Materials Processing Technologies

Les mer

Selected, peer reviewed papers from the 2013 4th International Conference on Advances in Materials and Manufacturing (ICAMMP 2013), 18-19 December, 2013, Kunming, China

  • Preface and Conference Organization
  • Chapter 1: Composites
  • The Study on Synthesis and Impact Properties of Novel Dual Polymerization of Epoxy Composite Materials to Green Production Process
  • Investigation of the Thermal and Optical Properties of Photopolymerizable Resin Enforced by Nanopowder in the Green Production Process
  • Analysis of Micro Structure and Elastic Property on 3-D Tubular Woven Carbon Fiber Composite
  • Effects of CeO2 Addition on Mechanical Properties of LaB6/B4C Composites
  • On the Damping Properties of a Polyurea Elastomer
  • Preparation and Characterization of Phosphorus Removal Agent by Lanthanum-Copper Composite Oxide
  • Microstructure and Properties of the Dispersion-Strengthened Cu-ZrO2 Composite for Application of Spot-Welding Electrode
  • Study on the Mechanical Properties of Steel - Polyurethane Tube
  • The Study of Impact Rule of Si Element on Cu/Al Composite Interface Compounds
  • Preparation and Thermal Properties of Polybenzoxazine/TiC Hybrids
  • Study on the Surfactant/Polymer Combination Flooding Relative Permeability Curves in Offshore Heavy Oil Reservoirs
  • Analysis of Composites for Best Designs of Refractive Solar Concentrators
  • Experimental Investigation into Spall of Carbon Phenolic Composites
  • Study on CF Reinforced Interface Properties of PES-C Resin Matrix Composite
  • Thermal and Mechanical Properties of Aluminate Cementitious Functional Materials Enriched with Nano-SiO2 for Thermal Energy Storage
  • Model I Interlaminar Fracture Toughness of Carbon Fiber Reinforced Polymer Matrix Composites
  • The Influence of Bi2O3 on SiO2-Al2O3-B2O3-RO Glass Propertiesarts
  • Study of Synergistic Effects of Cerium Oxide on Intumescent Flame Retardant Polypropylene System
  • Chapter 2: Micro/Nano Materials
  • A Copolymerization Modified Acrylate Resin and its Polyhedral Oligomeric Silsesquioxane Composites
  • Design and Experiment of T-Shape Glass Micro-Nozzle for Preparation of Microcapsules
  • Morphology Controllable Preparation of Gold Nanoplates through an Eco-Friendly Wet-Chemical Route
  • Research on the Conductive Property of CNT Nanopaper Facilitates the Actuation in Shape Memory Polymer Composites
  • The Crystallization Research on the Zr-Based Bulk Metallic Glasses by Ion Thinning
  • Influence of Temperature on the Preparation of GaN Nanowires
  • The Effects of Discharge Parameters on the Surface Morphology of Nickel Microspheres by EDM Combined with Ultrasonic Field
  • The Preparation of Porous TiO2 Nanostructure by Triblock Copolymers Co-Templating Method of TiOSO4 Solution Derived from Ilmenite Ore
  • Catalytic Degradation of Phenol by γ-Fe2O3 Nanoparticles
  • Size-Dependence of Photoluminescence Property of ZnO Nanoparticles
  • Controlling the Size and Dispersion of ZnO@SiO2 Core-Shell Nanostructure by Addition of Triblock Copolymer Surfactant and pH Adjustment during Precipitation and Encapsulation Process
  • Enhancing the Fluorescence of Graphene Quantum Dots with a Oxidation Way
  • 2D Assembly of Palladium Nanoparticles and AFM Characterization
  • Blocking Temperature of the System Core-Shell Nanoparticles
  • Growth Environment of Carbon Nanotubes by DC-PCVD
  • Reliable Solvothermal Growth of Diverse Heterostructures Based on CdS Nanowires
  • Hydrothermal Synthesis and Visible-Light-Driven Photocatalytic Activities of Bi2WO6 Uniform Hierarchical Microspheres
  • Chapter 3: Steel/Iron
  • Study of Inclusion’s Source and Character in Different T[O] Content
  • The Influence of Transient Casting on Inclusions in Steel
  • The Optimization of the Temper Technology of Production about Soft Steel
  • Hot Ductility of Low Carbon Nb-Microalloyed Weathering Steel
  • Influence of Heat Treatment on Mechanical Properties and Microstructure of Low Alloy Cast Steel (ZG25MnNi)
  • Effect of Hydrogen Induced Additional Stress on the Influence on High-Strength Steels
  • Influence of Milling Time on Morphology and Properties of Precursor Powders for 9Cr Oxide Dispersion Strengthened Steel
  • A Study on the Microstructure and Hardness Feature of 6CrW2MoVSi Steel after Heat Treatment
  • Microstructure Observation of the Tensile Fractured 430 Ferritic Stainless Steel
  • Influence of Oxide Morphologies on the Galvanizability of the Third Generation Automotive Steel
  • Effect of Heat Treatment Processes on Microstructure and Mechanical Properties of Nb-Ti-Stabilized 430 Stainless Steel Plate
  • Research and Implementation of the Data Fitting Algorithm for Testing the Metallurgical Performance of Iron Ore
  • The Research of Non-Oriented Electrical Steel Processed by Stress Relief Annealing Experiments
  • Designing Q&P Process for Experimental Steel with 0.47 % Carbon Content
  • μRaman Analysis of the Rust Layer on Rusted Cast Iron Artifacts
  • Source of Inclusion in IF Steel End Slabs
  • Multiaxial Fatigue Life Prediction of 50CrVA Spring Steel under Proportional Loading
  • Effect of Austenitizing Processes on Isothermal Quenching Microstructure in Bearing Steel
  • Effect of Carbon Content in Direct Reduction Process of Limonite Iron Oxide to Produce Pig Iron Substitute for Thin Wall Ductile Iron Process
  • Chapter 4: Ceramics
  • Investigation on Electrical Properties of CaCu3Ti4O12-Modified (Na,Bi)TiO3-BaTiO3 Lead Free Piezoceramics
  • Brief Introduction of Microwave Ceramics Developed in our Labs for Dielectric Resonators
  • The Effects of K/Na Ratio on the Electrical Properties of (Li, Sb, Ta) Modified KNN Piezoelectric Ceramics at Reduced Temperature with KNbO3 as Sintering Aid
  • Structure and Performance of Calcined Bauxite
  • Chapter 5: Metal Alloy Material
  • Microstructure and Compression Deformation Behavior in the Quasicrystal-Reinforced Mg-6Zn-2Y Alloy Solidified under Super-High Pressure at Room-Temperature
  • Research on Compressive Behavior and Deformation Heating of 7075-T6 Aluminum Alloy during Hot Compression
  • Aircraft Bearings Fracture Failure Analysis
  • An Experimental Investigation on the Solubility of Zr in Cu-Sn Alloys
  • Grain Structure and Precipitates in Squeeze Casting Al-Li-Mg-Zr Alloy
  • Dynamics of Phase Transformation in Cu-Cr-Zr Alloy
  • Effects of Structures of Zinc/Substrate Interface on Coating Adhesion of Hot-Dip Galvanized DP Steels
  • Cube Texture Formation of Cu-33at.%Ni Alloy Substrates and CeO2 Buffer Layer for YBCO Coated Conductors
  • Research on the Microstructure and Properties of Hypereutectic Al-Si Alloy for Semi-Solid Forming during Heat Treatment
  • Corrosion Behavior of Incoloy 800 in Molten Nitrate Salt
  • Effect of Ti on the Structure and Properties of Cu-15Ni-10Mn Alloy As-Cast Smelted at Atmosphere
  • Influence of Etchants on Phase Morphology of Casting Ni-Based Superalloy
  • The Measured Change in d-Electron of Ni in Ni-7.2at%Ti Alloy Studied by Electron Energy Loss Spectroscopy
  • Effect of Homogenization Annealing on Microstructure and Property of Cu-7.5Ni-5Sn Alloy
  • Effect of Alloying Elements V, Cr and Ni on the Electronic Structure and Mechanical Properties of FeAl from First-Principles Calculation
  • Effects of Additives on the Surface Layers of Boronized TC4 Titanium Alloys
  • Characterization on the Microstructures and Optical Performances of TiO2 Doped with Transition Metals
  • Dynamic Strain - Induced Boundary Migration during Dynamic Recovery at a High Temperature Deformation with a Lower Strain Rate
  • Numerical Analysis of Residual Stresses in Quenched High-Strength Aluminum Alloy Ultra-Thick Plates and their Reduction through Single-Side Cold Compression Method
  • Influence of Three Pattern Materials on the Marginal Adaption of Co-Cr Alloy Inner Crown of PFM Endocrown
  • Chapter 6: Optical / Electrical / Magnetic Materials
  • The Thermally Stimulated Current (TSC) Technique on Evaluating Degradation of ZnO Varistors
  • Design and Analysis of Self-Collimation-Based Photonic Crystal Beam Splitter
  • Electronic Structures and Spectral Properties of 4-Thiophene-1,8-Naphthalimide Derivatives
  • Fabrication of Shape Controllable Micro-Lens Arrays by Drop on Demand Printing on the Glass Micro-Holes Arrays
  • Analysis and Design of Transparent Microwave Absorbing Materials Based on the Destructive Interference at the Microwave Range
  • Characteristics of Slow Light in a Photonic Crystal Coupled-Cavity Waveguide
  • Investigation on p-In0.51Ga0.49As LOPC Mode by Raman Spectra
  • Influence of the Nitridation Time after the Al Pre-Seeded Layer on the Properties of GaN Layer Grown on Si (1 1 1)
  • Growth and Spectrum Properties of Ho:BaY2F8 Crystal
  • Preparation and Surface Modification of SiO2 Particles Used in Electronic Ink
  • The Photoluminescence Enhancement and Stability of Porous Silicon by Cathodic Reduction and Acid Treatment
  • Epitaxial Growth of SiC Epilayers for 10kV Schottky Diodes Using Chloride-Based CVD
  • Microstructure and Compound Developed from the Ce-As-Fe at 1173K
  • Chapter 7: Energy Materials
  • Current Research of Biodiesel Used on IC Engine and Improved Measures of Emissions
  • Hot corrosion resistance of four graphite material in molten Solar Salt
  • Current Situation of the Study on Oxidative Stability of Biodiesel
  • The Study on Oxidation Resistance of SiC Composites Used for Solar Absorber Coating
  • Influence of Activated Carbon to the Hydrogen Storage Characteristics of THF Hydrate
  • The Ni-MH Power Battery Electrode Material Admixture Process Fuzzy Control System
  • Kinetics Studies on Chemical Reaction of Producing Biodiesel Based on Transesterification
  • Chapter 8: Biomaterials and Technology
  • Alpha-Glucosidase Immobilization Based on PMMA/Chitosan Core-Shell Microparticles
  • Antibacterial Activity of the Extracts from Gentiana farreri Balf. f.
  • Research on Compound Bone Oyster Sauce and its Development
  • A Preliminary Study of Crosslinked Alginate-Chitosan Microspheres for Delivery System
  • The Structure Design and Fabrication of Drug Releasing Porous Material
  • The Chemical Swelling Effect on Poplar APMP
  • Effects of Cellulase Treatment on Surface Structure of Fast-Growing Poplar APMP Pulp
  • Vasorelaxation of Rat Aorta Induced by Extract from Clerodendranthus spicatus
  • Glutaraldehyde Cross-Linked Silk Fibroin Films for Controlled Release
  • AMPK and Metabolisms of Glucose and Lipid
  • Isolation and Characterization of Abietic Acid
  • Comparison of Physicochemical Properties of Gelatins Prepared from Different Fish Skins through Hot Water Extraction at Mild Temperature Condition
  • Establishment of a Sensitive Nitric Oxide Bioassay for Bioscreening Application
  • Preparation and Properties and Application of Renewable Source (Palm Oil Polyol) Based Polyurethanes Coatings and its Thermal Stability Improvement by Clay Nanocomposites
  • Production of Liquid Fuel by Catalytic Reformation of Carbohydrates in Energy Crops
  • Physicochemical Characterization of Oxidatively Degraded Calcium Lignosulfonate via Alkaline Hydrogen Peroxide
  • Effects of Uranium (VI) Stress on Growth and Antioxidant System in Chinese Cabbage
  • The Development of the Multi-Functional Wool/Aramid 1313 Blended Fabric
  • Anthocyanins Extracted from Chinese Blueberry and its Anticancer Effects on HepG2 Cells
  • Application of Ferritin Modified Eggshell Membrane in Heavy Metal Ion Uptake and Recovery
  • Preparation and Antioxidant Activities of Peanut (Arachin conarachin L.) Protein Peptides by Bacillus Subtilis Solid State Fermentation Method
  • Optimization of Aflatoxin Production of Aspergillus flavus on Peanuts
  • Study on Antibacterial Mechanism of Hemp Fiber
  • The Effect of Different Salt Additions on the Microstructure of YBCO Synthesized by a Biomimetic Method
  • The Sensory Quality and Textural Property of Ready-to-Eat Sea Cucumber in Storage Period
  • Application of Matlab Data Processing System in Research of Drug Microemulsion
  • Study on Effect of Rice Flour on Isothermal Crystallization Kinetics of Biodegradable Poly(L-Lactic Acid)
  • Finite Element Analysis Based Ultrasonic Elastography
  • Chapter 9: Chemical Materials
  • Technique Status and Prospect of Synthetic Rutile
  • Study on the Physicochemical Properties of the Mixture of Water and 1-butyl-3-methylimidazolium Hydrogen Sulfate Salt Ionic Liquids
  • Function and Application of Calixarene Derivatives
  • Study on the Clean Production Process of Basic Chromium Sulphate
  • To Measure the Absorbance at 328nm by Ultraviolet-Visible Spectrophotometer - an Alternative Pathway to Measure the Activity of Acetylcholinesterase
  • Facile Synthesis and Crystal Structure of N-(3-Cyano-4,5,6,7-tetrahydrobenzo[b]thiophen-2-yl)-2,2,2-trifluoroacetamide
  • Study of Phenyl Phenol Formaldehyde Resin and its Curing Performance of Aniline
  • Preparation and Characterization of High Porosity and High Oil-Absorbent Block CMCS Aerogel
  • Chapter 9: Chemical Materials
  • Theoretical Study on the Isomerization Reaction Mechanism of the Chain-Isomers of N9H9
  • Controllable Preparation Cu2O/AC and Application in Photocatalytic Degradation of Organic Dyes
  • Polymerization and Chiroptical Behavior of Polymethacrylamides Bearing a Bulky Oxazoline Pendant
  • Preparation and Photocatalytic Performance Study of Na+/K+-WO3 by Ultrasonic Micro Method
  • Study on the Strengthening of Kraft Liner Board by the Application of Series WEC Cleaner Papermaking Chemicals
  • Synthesis and Crystal Structure of 4-[5-(2-Bromophenyl)-1,3,4-Thiadiazol-2-Ylthio]-2-(trifluoromethyl)thieno[2,3-d]pyrimidine
  • Experimental Study on the Effective Separation of Chromium-Iron Ions in Multi-Component Solution System by Ihleite Method
  • Preparation of Modified Polyurethane Fiber and Study of its Lead Ions Adsorption
  • Isothermal Crystallization Behavior and Kinetics of Poly (lactic acid) Filled with a Novel Nucleating Agent
  • Study on the Prepartion of Slag Haycite for Phosphorus Removal Using Ammonium Hydrogen Carbonate as Pore Former
  • Preparation and Characterization of Polyurethane Foams from Modified Rosin-Based Polyether Polyol
  • Synergistic Inhibition of Sodium Molybdate and Sodium Silicate on Carbon Steel in KCl Media
  • Chapter 10: Film Material
  • Magnesium Diboride Superconducting Films Synthesized by Different Electron-Beam Annealing Currents
  • Numerical Simulation of Film Thickness Uniformity Deposited by Planar Circular Magnetron Sputtering System
  • Effect of Cobalt Concentration on the Microstructure of Nickel-Cobalt Alloy Deposits
  • Electrochromic Properties of Co3O4/NiO Nanocomposite Films
  • Thermal Stability of Ultralow k Carbon-Bridged Periodic Mesoporous Organosilica Film
  • Study on Preparation of SnO2 Polyacrylate Thermal Insulation Film with Liquid Phase Precipitation Process
  • Investigation of the Preparation of Anodized Nanoporous Alumina Array
  • Morphology and Orientation in Thin Film of Polystyrene-b-Polylactide Prepared by Solution-Casting
  • Biofilm-Electrode Process for Nitrate Removal from Micro-Polluted Water
  • Effective Anisotropy Constant of Bilayer Film
  • Characterization of TiO2 Thin Films Prepared by Vacuum Evaporation
  • Chapter 11: Building Materials
  • Influence of Calcium Carbonate Powder on Water Requirement and Flowability of Self-Compacting Mortar Incorporating Bagasse Ash
  • Development of Reinforced Structure Designed Composite Pavement
  • Design and Experiment on the Road Pavement for Rush to Repair
  • Usage of Steel Slag in Concrete as Coarse Aggregates
  • Usability of Fly Ashes from Czech Republic for Sintered Artificial Aggregate
  • Effect of Surface Modification of Steel Fiber on Concrete Comprehensive Performance
  • Experimental Study of Compression and Carbonation in Concrete Subjected to Freeze-Thaw Environment
  • Effect of Coconut Coir Uniformity on Strength of Unfired Soil Lime Bricks
  • Size Effect on Mechanical Properties of LVL
  • Influence of the Organic and Mineral Additions in the Porosity of Lime Mortars
  • Research on the Mix Design of Cement Asphalt Concrete
  • Effects of Artificial Silica Fume on Compressive Strength and Workability of Self-Compacting Concrete
  • Experimental Research on the Impact Damage of Composite Laminates at Different Energies
  • Chapter 12: Materials Mechanical Behavior and Fracture
  • Deposition Effects on the Ultimate Strength of Tungsten Alloy
  • Study on the Strength Properties of Superior Shoes Board and Furnish
  • A Comparative Study on the Performance of Domestic Cellulose Based Pressboards for Use in Transformers
  • Model of Equal-Stressed Cylinder Based on the Mohr Failure Criterion
  • Fatigue Properties of Titanium Alloy TA11 under Multiaxial Loadings with Tension - Bending Vibration
  • Study of Damage and Acoustic Emission Properties of Rocks under Uniaxial Cyclic Load-Unload
  • Effect of Consolidation with Alanine and Glutaraldehyde on the Properties of Fragile Wool Fabrics
  • The Influence of Temperature and Load on Dry Sliding Wear and Friction Property of Low Metallic Friction Material
  • Study on the Mechanical Property of Nomex Fiber in Different Temperature
  • Analysis of Hot Oil Pipeline Stress Influencing Factors
  • Laboratory Investigation on Mechanical Behavior of Artificial Ice under Triaxial Compression
  • Formulation of Equivalent Plastic Strain Accumulated in Rotating Bending Process of Metal Tubes for Severe Plastic Deformation
  • Study on Development of Hemp Stem-Based Panel
  • Optimization of Superior Shoes Board Immersion Condition
  • The HAM Solutions for Unsteady Boundary Layer Flow and Heat Transfer with Heat Source/Sink
  • Influence of Vibration Stress Relief (VSR) on the Residual Stress and Microstructure in Welded Plate of DH36 Low Alloy High Strength Steel
  • Chapter 13: Materials Physics and Chemistry
  • The Way of Obtain C3H4O+ Fragments Laser-Induced by Cycloheptanone IonExcited State
  • The Pressure of CO2 Crystal Melting Temperature Dependence
  • The Thermal Decomposition Characteristics of Sodium Pyroxenite Gangue in Baiyunebo Iron Ore
  • Corrosion Characteristics of Grounding Grid in Resistance-Reducing Agents
  • Kinetics of Rubber-Modified Nylon 6
  • Research on the Kinetics of Nylon Polymerized by Caprolactam Anionic Polymerization Using Adiabatic Method
  • Skyrmion Excitations in Graphene
  • First-Principles Calculation of the Vacancy Formation Energy in VC
  • Antiplane Response of Cylindrical Inclusion with Eccentric Crack to Incident SH Waves
  • The Characteristic Dissolution and Physical Chemistry Parameter of Synthetic Pyromorphite
  • Mathematical Simulation and Experimental Investigation of Propranolol Hydrochloride Loading/releasing from Ion Exchange Fibers
  • Study of Selected Characteristics of a Dry Cell Hydrogen Generator in Conditions of Long Term Operation
  • An Easy Route for the Preparation of Soluble High Molecular Weight Polymer Under Friedel-Crafts Conditions
  • Pyrolysis Characteristics of Blends from Coal and Polyethylene
  • The Correction Factor in Elastic Modulus Determining by Indentation
  • Shadowgraph of Pulse CO2 Laser Induced Breakdown in Different Pressure Air
  • Thermal Decomposition of Phosphate Ore by Using Differential Scanning Calorimetric Method
  • Chapter 14: Selection, Testing and Evaluation of Materials
  • A Material Selection Method Based on Finite Element Method
  • Research on the Regular between Concentration of Superfine Powder Extinguishing Agent Explosion Scatter and Fire-Extinguishing Ability
  • The Affecting Gene Research of Metal Sheet Drawing Force on Compensate Fuzzy Nerve Net Control
  • The Study on the Pipe Retracting Shape Parameter Identify of Quantum and Immunity Algorithm
  • Parameters Identification of Johnson-Cook Constitutive Equation for Aluminum Brass
  • Quality Control of Materials in Pressure Pipeline during the Installation
  • Application of Distribution of Oxygen Coefficient in Explosive Neutron Detection
  • Research and Manufacture of Tea-Cigarette
  • Fatigue Propagation Life Evaluating for Materials or Components Suffered Load Spectrum by Quantitative Fractography
  • Chapter 15: Surface Engineering / Coatings Technology
  • Studies of Surface Roughening for Sapphire Substrate
  • Review of Conductive Coating and its Application in Power Grounding System
  • Design of a Simple and Demountable Experimental Device for Drag Reduction of Super Hydrophobic Surface
  • Characterization of Microstructure, Phase Composition and Corrosion Resistance of Al-Zn-Si-RE Waterborne Coatings
  • The Application and Analysis of EDM on the Surface Light Trapping Structure
  • Characteristics of Inconel 718 Filler Metal Affecting to Welding Metal Zones of Cast Steel for Piston Crown Material
  • Study on Macroscopic Morphology and Microstructure of Single Ni60 Laser Clad Tracks Prepared Using a Variable Laser Beam Shaper
  • Comparison of Surface Properties of TiN and TiAlN Coating Prepared by Arc Ion Plating for the Improvement of Life-Time Extension of Tool Steel
  • Surface Roughness Study of Milled Carbon Fiber Reinforced Polymer (CFRP) Composite Using 4 mm 2-Flute Titanium Aluminum Nitride (TiAlN) Coated Carbide End Mills
  • Study on the Fractal Behavior and Fractal Characterization of Guide Way Joint Surface
  • Effect of Ca2+ on Structure and Corrosion Resistance of Conversion Coating Formed on Cast AZ91D Magnesium Alloys
  • Surface Modification of Titanium and its Alloys for Biomedical Application
  • Temperature Field Simulation of Laser Heated 1045 Steel Using with Shaped Laser Beam Profiles
  • Chapter 16: Material Forming
  • Temperature Controlling System Design of Non-Isothermal Deep Drawing Mould for Magnesium Alloy Sheet
  • Study on Micro Hydroforming of Metals
  • Application of Mass Scaling Technology in Steel Tube Rolling by Finite Element Simulation
  • The Research on the Simulation Metal Flow in Forging of Bevel Gears
  • Multi-Objective Optimization and Research of Hot Stamping Process Parameters
  • Microstructure Analysis on GMAW Additive Manufacturing Parts Constrained by Electromagnetism
  • Mini-Thixoforming of High-Alloyed CPM REX 121 Steel
  • Characterization of Hot Deformation Behavior of Udimet720Li Superalloy Using Processing Map
  • The Research on Penetration of New Annular MEFP
  • Chapter 17: Material Machining
  • Extracting Acoustic Emission Signal Feature of Grinding Processing
  • Two-Step Identification of Instantaneous Cutting Force Coefficients and Cutter Runout
  • Experimental Research of Workpiece Temperature in Orthogonal Turn-Milling Compound Machining
  • Cutting Force Model for Heat Assisted Titanium Alloy Milling
  • Optimization of Cutting Conditions of YG15 on Finish Cutting in WEDM Based on Taguchi Method
  • The Effect of Cutting Process Parameters on the Stability in Milling
  • Cutting Performance of TiB2/WC/h-BN Micro/nano Composite Gradient Self-Lubricating Ceramic Tool when Machining Carbon Steel
  • Combined Atomistic-Continuum Modeling of Nano-EDM Process
  • Influence on BTA Boring Bar Transverse Vibration Considering Inner Cutting Fluid Velocity and Axial Force
  • Directly Manufacturing Table Tennis Mould by Hybrid Plasma Deposition & Milling
  • The Straightening Scheme Analysis for the Copper-Clad Steel Tube
  • Effect of Alumina Bubbles on Mechanical Properties and Microstructure of Metal Bond for Superabrasive Grinding Wheels
  • Germanium Crystal Anisotropy Affecting to Cutting Force in SPDT
  • The Cutting Parameter Affecting to Surface Roughness in Single-Point Diamond Turning
  • Fast Prediction Model for Closure Pressure in Hot Isostatic Pressing
  • Numerical Simulation of the Orthogonal Cutting of Carbon Fiber Reinforced Composite Material
  • Powder Particles Grinder Mechanism Design and Exploration Tool
  • Chapter 18: Welding and Joining
  • Kinematics Analysis of a 6-DOF Riveting Manipulator Based on ADAMS
  • A Performance Study on Self-Piercing Riveting and Adhesive Hybrid Joints of Different Adhesive
  • A Performance Study of Clinched Joints with Different Material
  • Application of the Laser Welding Technique in Aircraft Repair
  • Microstructure and Hardness of Friction Welded SSM 356 Aluminium Alloy
  • Numerical Simulation of Temperature Fields by Welding of Ti-Al Alloys Applying Volumetric Heat Source
  • Topology Optimization and Robust Analysis of Welding Spot Layout for a Heavy Duty Truck Cab Based on Element Strain Energy Density
  • Study on Arc and Drop Transfer Behaviors of DCEN MAG Welding
  • Evaluation of Welding Metal Zones in the Case Welded with 0.5 Mo Filler Metal to Forged Steel for Piston Crown Material
  • Effect of Heat Treatments on Microstructure and Mechanical Properties of Low Carbon Steel Pipes Welded by Induction Process
  • Chapter 19: Materials Processing Technologies
  • Numerical Simulation on Stress Field in Inside-Beam Laser Cladding
  • The Research on Ceramic Friction and Flow Stress of Plastic Forming
  • 6D Laser Measurement System Based on Double Longitudinal Modes Laser
  • Influence of High Energy Ball Mill Technology on Cube Texture Formation of Ni-8at.%W Alloy Substrates for YBCO-Coated Conductors
  • The Effect of Electromagnetic Pulse Treatment on Thin – Wall Bearing Ferrules Dimensional Accuracy
  • Multi-Objective Optimization for Rolling Schedule of High Strength Sheet Based on ACPSO
  • The Grey Relation Analysis of Hemp Fiber Fineness and Chemical Composition after Plasma Assisted Degumming
Les mer

Produktdetaljer

ISBN
9783038350149
Publisert
2014-05-01
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
2640 gr
Høyde
240 mm
Bredde
170 mm
Dybde
71 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1416

Redaktør
Jiang, Zheng Yi
Liu Xianghua
Han, Jing Tao

Relaterte produkter