Fatigue Life Evaluation of ERW Joint in the Pipe Using Monte-Carlo SimulationA Study on the Low Cycle Fatigue Behavior of the Steel for Shipbuilding Industry Fatigue Life Prediction of the Vulcanized Natural Rubber Contact Fatigue Life Prediction under EHL Contact Fatigue Life Evaluation for a Reaping Knife of Combine Image Processing Techniques Applied to Automatic Measurement of the Fatigue-Crack Analytical Study on Biaxial Strength of Structural Ceramics under Tension-Compression Condition Development of Corroded Gas Pipeline Assessment Program Based on Limit Load Solution Measurement of Continuous Micro-Tensile Strain Using Micro-ESPI Technique Calculation of Local Stress-Strain Behavior at Notches for Non-Masing Material under Cyclic Loading A Study on the Relationship between Fatigue Crack Opening Behavior and Reversed Plastic Zone Size Shot Peening and Fatigue Crack Growth in 7075-T7351 Aluminum Dynamic Behavior of Underground Structures in Multi-Layered Media Development on Stress Monitoring Method for Measurement of Cyclic Stress of Railway Axles 'Micro-Meso-Process Theory' for Fatigue Source Evolution in Metallic Parts Application of Artificial Neural Network for Fatigue Life Prediction Prediction of the Fatigue Life of Tires Using CED and VCCT Fatigue Life Evaluation of Press-Fitted Specimens by Using Multiaxial Fatigue Theory at Contact Edge The Effects of Residual Stress of Contact Fatigue Life for Railway Wheels Development of Damage Assessment Method for Steel Structures Using Material-Structure Coupling Analysis Fatigue Crack Growth Behavior of Corner Cracks under LBH Loading Fracture Toughness of Liquid Phase Sintered SiC by Using Indentation Fracture MethodAnisotropic Deformation Effect on the Fracture of Core Components Made of Two-Dimensional C/C Composite An Elastic-Plastic Fracture Behavior of the Interface Using the Property Gradient in MMC Bonding Strength and Microstructure of Cermet/Cu-Based Alloy Composite Brazed Coatings A Stochastic Evaluation of ε-N Curve in Polyacetal Axial Collapse Characteristics of Aluminum/CFRP Compound Circular Tubes Dynamic Deformation Behavior of Rubber (NR/NBR) under High Strain Rate Compressive Loading Compression Characteristics of Paper and Coated Paper Penetration Fracture Characteristics of CFRP Curved Laminates Experimental Investigation of Interlaminar Fracture Toughness of CFRP Composites with Different Stitching Patterns Verification of the Delamination Growth Rate (dAD/da) in Fiber Reinforced Metal Laminates Buckling Fracture of Two-Dimensional Carbon-Fiber Reinforced Carbon-Matrix Composite Effect of Particle Size on Fracture Toughness of Spherical-Silica Particle Filled Epoxy Composites Effect of Water Absorption Rates on Fracture Toughness of Sisal Textile Fiber Reinforced Composites Study on 2-D Multi-Fiber Arrange Model Composites A Study on the Relationship of Frequency and Deformation for Viscoelastic Material The Bond Strength and Fracture Behaviors of Hydroxyapatite Coatings on Carbon/Carbon CompositesMechanical Properties of Photosensitive Polyimide Film by Nanoindentation and Microtensile Test Shape Memory Thin Film for Blood Vessel Holding Actuator of Thrombus Detector Mechanical Properties of Nano Grained Ni20Cr20Fe5Nb1Y2O3 Composite and Ni20Cr20Fe5Nb2Al Alloy A Study on the Monitoring of Nano Scale EHL Film Formation with Ultra Low Aspect Ratio Verification of Prediction Method for Electromigration Failure Using Angled Polycrystalline Line The Characterization of Adhesion and Friction of PDMS Polymer for Nanoimprinting Lithography Force-Calibrated AFM for Mechanical Test of Freestanding Thin Films Crack Propagation Behavior in Nano Size HCP Crystals by Molecular Dynamic Simulation Assessment of Indentation Fracture Toughness Based on a Direct Measurement of Crack-Driving Residual Stress Fracture Toughness Measurement of a Micro-Sized Single Crystal Silicon A Study of the Static and Dynamic Characteristics for Automotive Rubber Mount by FEA and ExperimentThe Thermal Analysis of Brake Disc with 3-D Coupled Analysis Study on Vehicle Collision-Avoiding Radar and Intelligent Cruise Control System Development of a Torsion-Free Brake Shoe Holder Hanger for the Bogie of Railway Freight Car Fatigue Design Criterion of LCV Leaf Spring Based on Road Load Response Analysis The Failure Analysis of the Fractured Steel-Wire-Rope of Electric Glass Lifter in Car Design of Compound CVT with 2K-H II Type Differential Gear The Development of Dunnage for Transportation of a Steel Roll Coil Structural Assessment for Bogie Frame of 180km/h Korean Tilting Train A Study on the Contact Behaviors of Infinitely Variable Transmission System with Full Toroidal Shapes of Disks The Influence of Residual Stresses by Shot Peening on Fatigue Strength of the Automobile's Coil Spring Analysis to Stress Relaxation Phenomena of Viscoelastic Materials by Means of Irreversible Thermodynamics (Ⅰ)Creep, Tensile and Oxidation Properties of Ti-4wt%Fe-(0~2)wt%Si Alloys Evaluation on Small Punch Creep Test by Finite Element Method Fracture and Viscoelastic Behavior of Some Polymers at High Temperatures Analysis to Nonlinear Creep Behavior of Viscoelastic Materials with Structure Varieties by Means of Irreversible Thermodynamics (Ⅱ) Estimation of Creep Crack Growth Properties Using Circumferential Notched Round Bar Specimen for 12CrWCoB Rotor Steel High Temperature Oxidation Behavior and Strength of Ti-Al-Nb Ternary Alloys A Study of Nitrogen Effect on the Characteristics of Creep-Rupture in 18Cr-9Ni Austenitic Steels Evaluation of Creep-Fatigue Life Using Backscattering of Rayleigh Surface Wave Irradiation and Operating Temperature Effects on the Tensile Characteristics of CANDU Pressure Tube Material Some Fundamental Aspects of High Temperature Defect Assessment Mini-Composites C/SiC Tensile Strength at Elevated Temperature in Vacuum The Evaluation of Tensile Properties at High Temperatures Using a Ring Specimen Creep Crack Growth in P92 and P122 Alloy Steel Weldment High Temperature Crack Growth Behavior of 304 Stainless Steel under Creep and Fatigue Loading Effects of Heat Treatment Condition on the Microstructure Evolution of Inconel 690 The Effect of Delta-Ferrite in P92 Steel on the Formation of Laves Phase and Cavities for the Reduction of Low Cycle Fatigue and Creep-Fatigue Life Effects of Forming Processing on Mechanical Properties of Ti-48Al-2Mn-2Nb IntermetallicsEffect of Processing Parameters on Properties and Microstructures of Warm-Rolled Interstitial-Free (IF) Steel Sheets Effects of Melt-Treatment Technique on the Metallurgical Quality and Mechanical Properties of Al Sheet Used for Can Manufacture The Strength and Hardness of Metal Matrix Composites by Binder Additives Influence of Containerless Solidification on Hardness in Multifunctional Titanium Based Alloys Simple Estimation of Deformation-Induced Martensite in Stainless Steel Tensile and Fracture Behavior of NbSS/Nb5Si3 In Situ Composites Prepared by Arc Melting Measuring Residual Stress with the Indentation Method in Struc­tural CeramicsA New Specimen for Measuring the Interfacial Toughness of Al-0.5%Cu Thin Film on Si Substrate Strength Analysis of MEMS Micromirror Devices - Effects of Loading Mode and Etching Damage Mechanical Properties and Process of ZnO Deposited Various Substrates The Study on Fatigue Life of Interconnect with Respect to Geometrical Shape of Supporting Structure and Load Conditions in MEMS New Structures and Techniques for Easy Axial Loading Test of Static and Fatigue Properties of MEMS Materials Fracture Behavior of Single- and Polycrystalline Silicon Films for MEMS Applications The Improvement of Wet Anisotropic Etching with Megasonic Wave Influence of Groove Slotting for Micro-Sensor Embedding on Smart Bearing's Mechanical Characteristics Development of Full-Reversed Bending Fatigue Tester Based on AFM Technique for Cyclic Damage Evaluation of MEMS XRD Tensile Test Technique to Measure Mechanical Properties of Micron-Thick Si and TiN Films Effect of Thickness on Grain Growth in Electrodeposited Copper Film by Cyclic Stressing Experimental Reliability Estimation and Improvement for a Wafer Level Vacuum Packaged MEMS Device Analysis of Time-Dependent Degradation of a Micro-Resonating Structure with a NotchEvaluation of Shape Recovery Force by Electric Heating of TiNi Shape-Memory Alloy Reinforced CompositesApparent Negative Piezoresistivity of Single-Ply CFRP due to Poor Electrical Contact of Four-Probe Method Equivalent Modeling for Shape Design of IPMC (Ionic Polymer-Metal Composite) as Flapping Actuator Electrostatically Driven Soft Polymer Actuator Based on Dielectric Elastomer Sub-Structure Pseudo-Dynamic Response Test of a Pseudo-Elastic Bracing System Made of Shape Memory Alloy The Hybrid Simulation of a Steel Frame Strengthened by Fully Mechanical Braces Preparation of Solid Polymer Actuator Based on PEDOT/NBR/Ionic Liquid Tensile and Compressive Behaviors of Smart Electrorheological Materials Application of Electric Resistance Change Method to Damage Detection of CFRP Bolted Joints Development of Smart Composite Panel with Optical Fiber Sensors Design and Control of Three-DOF Dielectric Polymer Actuator Characterization of Electro-Active Paper Composite Cure Monitoring and Stress-Strain Sensing of Single-Carbon Fiber Composites by the Measurement of Electrical Resistance Limit Load Interaction of Welded Piping Branch Junctions Subjected to Combined Internal Pressure and BendingFinite Element Analysis and Integrity Assessment of Y-Branch Crack Opening/Sliding Morphology and Stress Intensity Factor of Slant Fatigue Crack Boundary Element Analysis of an Interface Crack in a Bonded Viscoelastic Thin Film Finite Element Analysis of Fracture Process of Weld Specimen Application of Discrete Hamilton's Equation for Parallel Processing of Impact Problems Analysis of Failure Criterion for Combustion Chamber with Notch Using Effective Distance Basic Concept on Structural Design Criteria for Zirconia Ceramics Applying to Nuclear Components Finite Element Analysis of Hydrogen Concentration for Blister Growth Estimation of CANDU Pressure Tube Fatigue Life Prediction of Ship Welded MaterialsNumerical Approach to Fracture Spacing in Two Layered Material Effect of Strength Mismatch on Ductile Crack Initiation Behavior from Notch Root under Static Loading Fatigue Life Evaluation Model for Welded Joints with Residual Stresses Ductile to Brittle Transition of Pure Al Sheet Constrained by Parallel Bi-Interface with High Strength Al Alloy Fatigue Analysis of Nuclear Welded Structures Based on Structural Stress and Elasto-Plastic Fracture Mechanics Approach Fatigue Crack Initiation and Propagation Life of Welded Joints Influence of Specimen Configuration and TIG Welding on Fracture Toughness of RAFs (JLF-1) Influence of Dwell Time on Creep-Fatigue Crack Growth Behavior of P92 Steel Weldment at High Temperature Mechanical and Electrical Properties of Sn-3.5Ag Solder/Cu BGA Packages during Multiple ReflowsExperimental Investigation on the Interface Properties Evaluation in Piezoelectric Layered Structures by Love Waves Propagation Nonlinear Ultrasonic Method to Detect Micro-Delamination in Electronic Packaging Geometry Sensitivity Analyses of Microstructures of IC Packages on Passivation Cracking Effects of Microstructure on Material Behaviors of Solder Alloys A Comparative Study of The Fatigue Behavior of SnAgCu and SnPb Solder Joints Diagram of Electromigration Pattern in Eutectic Pb-Sn and Pb-Free Solders Fracture Mechanic Analysis for Package Delamination Analysis of the Test Parameters in the Shear Test of BGA Solder Joints Shear Strength of Fluxless Solder Joints between Sn and In Bumps Investigations of Interfacial Reaction and Shear Strength between Pb-Free Flip Chip Solder and Electroplated Cu UBM Metal Leadframe Surface Cleaning Prior to Electroplating by Atmospheric Pressure Glow Discharge Plasma Fabrication of Bi-Te Based Thermoelectric Semiconductors by Using Hybrid Powders Time-Dependent Cyclic Deformation and Failure Behavior and Its Damage Coupled Simulation for Solder Alloy 63Sn-37Pb Chip Warpage Damage Model for ACA Film Type Electronic Packages Reliability Characterization of Organic Solderability Preservatives (OSP) of IC Packages by Drop and Cyclic Bend Test Vibration Reliability in Flip Chip Package Tensile Stress-Strain Curves Modeling of Four Kinds of Solders with Temperature and Rate Dependence Optimal Structural Design of Multi Chip Package to Reduce the Failure in Substrate Bonding Parameters of Anisotropic Conductive Adhesive Film and Peeling Strength Effects of Hydrogen Gas Environment on Non-Propagation Phenomena of a Type 304 Austenitic Stainless SteelSusceptibility of Automobile Spring Steels to Wet-Dry Cyclic Corrosion Induced Environmental Embrittlement Effects of Environmental Factors on Stress Corrosion Cracking of Pipeline Steels Evaluation of Mechanical Properties of Alumina Green Compact during Sintering at Relative Low Temperature Evaluation of Cracking Behavior of SPV50Q High Strength Steel Weldment in Wet H2S Containing Environment Environmental Effects on Stress Corrosion Cracking Susceptibility of Cr-Mo Steel Tubes in Steam Generators Study on Mechanical Behaviors of 16MnR Steel after Long Term Used as Liquefied Petroleum Gas Vessel Environmental Fatigue Crack Propagation Behavior of Cast Stainless Steels under PWR Condition Stress Corrosion Crack Tests of 16MnR Low Alloy Steel in Anhydrous Ammonia Environment Development of Small Punch Test for EAC Evaluation Effect of Grain Boundary Microchemistry on IGSCC of Alloy 132 in a Simulated BWR Environment Effects of Cold Working and Heat Treatment on Caustic Stress Corrosion Cracking of Alloy 800M Estimation Method of SCC Initiation Site Based on Electrochemical Transients Investigation on Fatigue Behavior of Zircaloy -4 Alloy in Room Temperature and 380°C Condition Verification of Mechanical Properties of A V-4Cr-4Ti Alloy Using Finite Element MethodFinite Element Modeling of Damage Formation in Rubber-Toughened Polymer Implementation of a Mesoscopic Mechanical Model for the Shear Fracture Process Analysis of Masonry Computational Evaluation of Micro- to Macroscopic Mechanical Characteristics of Low-Carbon TRIP Steel under Different Conditions Numerical Studies on Damage Evolution of Notched Round-Bar with Welding Mechanical Heterogeneity Yield Criterion and Constitutive Model for Ductile Materials with Hydrogen and Deformation Induced Voids The Constitutive Behavior of Metallic Foams Using Nanoindentation Technique and FE Modeling Crack Growth Simulation of Arbitrarily Shaped 3D Cracks Using Finite Element Alternating MethodMethod for Determining a Polynomial Constitutive Equation with Temperature and Strain-Rate Dependence by the AIC Influence of Stress Parallel to Crack Plan on Subcritical Crack Propagation in Glass under Biaxial StressApplied Research of Fracture for Brass in Extra-Low Cycle Inverse Rotating Bending Fatigue Room Temperature Creep and Its Influence on Fatigue Crack Growth in a 304 Stainless Steel Evaluation of the Fretting Fatigue Behavior of Ti-6Al-4V Alloy A Study on the Failure Analysis of Turbine Blade under Fatigue Load Using X-Ray Fractography Microstructure and Creep Behavior of BN/Al (-Mg) Metal Matrix Composite Research on Microstructures of Alloyed Layer by Plasma Surface Alloying with Tungsten and Molybdenum 3-D Micromechanics Model for Progressive Failure Analysis of Laminated Cylindrical Composite Shell Mechanisms of Fatigue Crack Growth in WC-Co Cemented Carbides Tensile Pre-Strain Effects on Torsional Fatigue Properties of Medium Carbon Steels Influence of Hydrogen on Tensile Property of Ti-6Al-4V Applied Research of Fracture for Brass in Extra-Low Cycle Rotating Bending Fatigue Thermomechanical Fatigue Behavior of the Ferritic Stainless Steel Plasticity-Induced Martensitic Phase Transformation in Fatigue of Unnotched SUS304 Plates An Initial Small Fatigue Crack by Compressive Stress Influence of Microstructure on Small Crack Behavior Fatigue Properties of Smart Electrorheological Materials Microstructure and Mechanical Properties of A 1.4%C Ultra High Carbon Steel Study on Temper Embrittlement of Phosphorus in Steel 12Cr1MoV In Situ Observation of Fracture of Aluminium Foam Using Synchrotron X-Ray Microtomography Three-Dimensional Material Failure Process Analysis Applied Research of Fracture for Three-Points Bending to Blanking of Tool Steel Experimental Limit Load of Forged Piping Branch Junctions and Comparison with Existing Solutions Principal Stress Separation Using a Combination of Photoelasticity and Thermoelastic Stress Analysis under Biaxial Stress Effect of Heat Treatment on the Properties of Inconel X-750 Research on Intercritical Rolling of 0.2C-1.5Si-1.5Mn TRIP Steels by Thermo-Mechanical Simulation Micro Behavior Study of Non-Metallic Inclusion in High Strength Shaft Steel Mechanism of Delamination and Its Effects on Fracture of Surface Crack Bodies in Ductile Pipeline Steel Analysis of Underground Pipelines Subjected to Frost Heaving Forces Effect of the Elastic Restraint by Adjacent Plate Component on the Local Buckling of Orthotropic Box-Shape Flexural MembersBuckling Behavior of Pultruded Monosymmetric Members Prediction of Elastic Properties in Discontinuous Composite Materials Finite Element Simulation for Tensile Properties of δ-Al2O3f/Al Alloy Composites with Thermal Residual Stress Considered Determination of Singular Residual Stresses in Epoxy Layer Deposited on Concrete Substrate Transient Dynamic Response of Delaminated Composite Twisted Cylindrical Shells Subjected to Low Velocity ImpactFatigue Behavior of Impacted Plain-Weave Glass/Epoxy Composites under Tensile Fatigue Loading Impact Behavior Analysis of PC/ABS (50/50) Blends A Study on Low Velocity Impact of Woven Glass/Phenolic Composite Laminates Considering Environmental Effects Impact Analysis and Test on the Spacer Grid Assembly for PWRs Influence of Confinement Condition on Particle Impact Damage in Soda-Lime Glass Effect of Particle Impact Velocity on Cone Crack Shape in Ceramic Material Impact Fracture Behavior in Alumina Ceramic Plates Finite Element Analysis of Brain Damage due to Impact Force with a Three Dimensional Head Model Simulation and Experimental Investigation of Impact Damage in Composite Shell Energy Absorption Characteristics on Aluminum Beams Strengthened with CFRP Laminates under Impact Loading Analysis Technology on the Thick Plate Free Drop Impact of the Cask for Radioactive Material Transport Impact Fracture Behavior of Zr-Based Bulk Metallic Glass Using Subsize Charpy Specimen Prediction of Slip Displacement in Nuclear Fuel Fretting WearA Biomimetic Method of Hydroxyapatite Powders Synthesized in Simulated Body Fluid Analysis of the Failure of Turbocharger Shaft Bearing in Diesel Engines A Fundamental Study of the Tribological Characteristics of Sheave Steel against a Wire Rope Friction and Wear Characteristics for Automotive Leaf Spring Materials due to the Influence of the Residual Stress Experimental Study on the Wear Behavior of Nuclear Fuel Rod in High Temperature Water Environment Effect of Micro-Addition Rare Earth and Chrome on Friction and Wear Behavior of Boronized Layer Finite Element Analysis of Fretting Wear Problems in Consideration of Frictional Contact Fretting Wear Characteristics of INCONEL 690 and INCONEL 600 in Water Environment Development of Wear Test System for Steam Generator Tubes in Nuclear Power Plants Wear Characteristics of INCONEL 690 and INCONEL 600 in Elevated Temperature Tribological Behavior of Multilayered WC-Ti1-xAlxN Coatings Deposited by Cathodic Arc Deposition Process on High Speed Steel Compression Characteristic and Tensile Property in an (Alpha+Beta)-Type Titanium Alloy at High TemperatureEffect of Film Thickness on Fatigue Strength of TiAl Alloy Coated with TiAlN Film at Elevated Temperature Comparison of Creep Behavior of 2.25Cr-1.6W/Mod. 9Cr-1Mo Dissimilar Weld Joint with Each Matching Filler Metal High Temperature Creep, Fatigue and Creep/Fatigue Interaction Behavior of γ' Strengthened Austenitic Iron-Base Superalloy On the Creep Fracture Toughness of 2¼Cr1Mo Steel Evaluation of DBTT and Creep Properties of Aged Main Valve Casing by Using Small Punch Specimens Elevated Temperature Mechanical Properties of a Directionally Solidified NiAl/Cr(Mo)-Hf Alloy Tensile Behavior of 17-4PH Stainless Steel under Rapid Heating Experimental Study of the High Temperature Mechanical Behaviors of TLP Bonding of Two Ni-Base Single Crystals Characterization of High Temperature Thermomechanical Fatigue Properties for Particle Reinforced Composites Strength Characteristics and Deformation Behavior of Aluminum Honeycomb Sandwich Plates under Three-Point Bending LoadsSuggestion of the Delamination Aspect Ratio in GLARE Influence of Material Composition on Mechanical Properties and Fracture Behavior of Ceramic-Metal Composites Effective Thermal Conductivity of Functionally Graded Composite with Arbitrary Geometry of Particulate Effects of Matrix on Mechanical Property Test Bamboo Fiber Composite Materials Electro-Active Papers for Remotely-Driven Smart Actuators Electric Resistance Property of a Conducting Shape Memory Polyurethane Actuator Optimal Grinding Condition of ZrO2 Ferrule for Optical Fiber Connector Using the Taguchi Method Mechanical Behavior of Shape Memory Alloy Composites Effect of Microstructure on Fatigue Crack Growth Resistance of Magnesium Alloy under Biaxial StressMixed Mode Fatigue Crack Propagation in 7075-T6 Aluminum Sheet Material A Model for Determining Crack Opening Stress Intensity Factor Ratio under Tri-Axial Stress State A Study on the Fracture Behavior of Magnesium and Aluminium Alloy under Dynamic Biaxial Stress A Horizontal Vibration Wave Model for High Speed Elevators Mode II Fatigue Crack Behavior in Compact Tension Shear Specimen Influences of Isotropic and Anisotropic Material Properties on Stress Intensity Factors of the Crack Tip under Biaxial Stress Effect of Stress State on Mode II Stable Crack Extension Effect of Mode Mixty on Interfacial Fracture Toughness of Si/Organic Polymer Numerical Approach to Fracture of Glass under Biaxial Stress Behavior of Fatigue Crack around a Hole under Biaxial Loading: Effect of Biaxial Static Load Mechanical Properties of LaB6-ZrB2 Composites Vibration Characteristics of the FIV Test LoopEvaluation of Nuclear Piping Failure Frequency in Korean Pressurized Water Reactors Bottom-Mounted Nozzle Failure Modes of a Nuclear Reactor Pressure Vessel under Severe Accident Conditions Alternative Fatigue Evaluation of Nuclear Piping Designed by ANSI B31.1 Code Analysis Technology on the Temperature and Thermal Stress of the Cask for Radioactive Material Transport Determination of the Key Microstructural Parameter for the Cleavage Fracture Toughness of Reactor Pressure Vessel Steels in the Transition Region Surface Crack Behavior in Socket Weld of Nuclear Piping under Fatigue Loading Condition Critical Temperatures for Initiating and Arresting Delayed Hydride Cracking in a Zr-2.5Nb Pressure Tube Evaluation of the Fracture Characteristics with Thermal Aging on Dissimilar Welds in Reactor Coolant System Annealing Effect of Thermal Conductivity on Thermal Stress Induced Fracture of Nuclear Graphite Plastic Limit Load Solutions for Surface Crack in the Steam Generator Tubes The Mechanical Property of TiN Film Deposited on N+-Implanted Aluminum by Magnetron SputteringAnalysis of Cracking and Delamination of Sputtered Thin Films during Wear Process Tribological Properties of Artificial Hip Joint Material Coated with DLC Thin Film in the Simulated Body Environment A Methodology for Damage Strength Evaluation of a Single Biomimetic Microcapsule Adhesion Analysis Considering Surface Energy and Surface Stresses Chemical Modification of Diamond Films on Pure Titanium Deposited by MPCVD Method An Evaluation of Appropriate Probabilistic ­S-­N Curve for the Turbine Blade Steel in the Low Pressure SteamZ-Parameter Method for Life Prediction in Low Carbon Steels A New Stochastic Model for Prediction of Fatigue Crack Propagation Fatigue Life Evaluation of Vehicle Wheel Bolts under Random Loading Automotive Component Fatigue Life Estimation by Frequency Domain Approach Reliability Evaluation of Interfacial Shear Strength on Single Carbon-Fiber/Rubber-Modified Epoxy Resin System Study on Reliability Assessment Procedures for Torsion Spring of Vehicle Door Latch A Study on Automatic Belt Tensioner Life Evaluation in Accessory Belt System Reliability Evaluation of Hinges Used in Electronic Communication Devices Determination of the Deposition Characteristics and Luminance Decay Mechanisms in OLED and their Implications in Reliability Assessment Reliability Estimation of Solder Joint Utilizing Thermal Fatigue Models The Assessment of Influence of the Design Factors on the Reliability of BGA Solder Joints Reliability Analysis of ACF Interconnection Assembly Process Using FEM Stress Corrosion Cracking Life Estimation of Hold-Down Spring Screw for Nuclear Fuel Assembly Proposal of New Biaxial Fatigue Life Prediction Parameter by Using the Effective Shear Stress for CF8M Stainless Steels Very Long Life Fatigue Behavior of Bearing Steel AISI 52100 Failure Analysis of Heterogeneous Microstructures in Ti-6Al-4V Alloy Using Probability Functions Creep Life Evaluation by Micro-Cavities The Random Effects of the Seepage Field on the Slope Reliability A Study on Procedures of the Accelerated Life Testing for Hose Assemblies Safety Diagnosis of Collided Subway Electric Multiple Units (EMUs) Barrier Function Method in Reliability Based Design Optimization Effect of Shock Wave on Reliability of Buried Pipelines Reliability Optimum Design of NWG-Type Oil-Submerged Planetary Gear Reducer Structural Topology Design Considering Reliability Failure Analysis on Rubber-Modified Epoxy Resin under Various Loading Speed Conditions Reliability Assessment on Thickness Effect in Fatigue Crack Growth The Improvement of High Cycle Fatigue Properties of AC4CH Alloy with Shot Peening Treatment Treatment of Cut Slope and Analysis of its Reliability A Unified Method for the Prediction of the Fatigue Strength of Small-Hole-Containing Components under Combined Loading Interference Effect of Interaction Cracks Investigated by Photoelastic and Caustics MethodsA Study on the Evaluation of Creep Degradation of High Temperature Pipeline Steel by Non-Destructive Test Degradation Evaluation of 2.25Cr-1Mo Steel Using Nondestructive Method Determination of the Young's Modulus and Loss Factor by Acoustic Bending Vibration Methods Pattern Classification of Acoustic Emission Signals during Wood Drying by Principal Component Analysis and Artificial Neural Network Experimental Study on the Infrared Information of Metal Specimen when Loaded On Nondestructive Evaluation of Wood Materials Using Ultrasonic Techniques Development of a Fiber-Optic Accelerometer for Third-Party Damage Detection Development of a Fiber-Optic AE Sensor for On-Line Monitoring System Sub-Surface Crack Detection by Using Laser Induced Transient Stress Wave Propagation Quality Monitoring of Thermally Degraded Stationary Gas Turbine Blade Material by Surface Wave Technique An Active Piezo Array Sensor for Elastic Wave Detection Characteristics of Patch Type Smart-Piezo-Sensor for Smart Structures Fatigue Crack Propagation Behavior and Degradation Characteristics of STS316L by Nondestructive Evaluation Modeling of Characteristics of Magneto-Optical Sensor Using FEM and Dipole Model for Nondestructive Evaluation Change of the Pulsed Eddy Current Signals by the Variation of the Thickness of an Aluminum Specimen Image Distortion Compensation by Using a Polynomial Model in an X-Ray Digital Tomosynthesis System Acoustic Emission Technique for Detection of Corrosion-Induced Wire Fracture Elastic Wave Signal Characteristics of SiC Ceramics with Crack Healing Ability by Wavelet Analysis A Study on the Laser Conducting Ultrasonic Method for Non-Destructive Evaluation of Welding Part Development of Eddy Current Test for the Fatigue Behavior in Carbon/Epoxy Tube Prediction of Ultrasonic Guided Wave Dispersion in Bent Pipes Using Finite Element Analysis and 2-D Fourier Transform An Automated System for Detection of Through-Wall Cracks in Racks in Steam Generator Tubes Mode Tuning of Guided Wave in a Seamless Stainless Steel Tube Using an Array Transducer The Crack Growth Evaluation of A335 P22 Steels by Acoustic Emission Nondestructive Evaluation in Materials Using Time-Frequency Analysis Methods Detection of Matrix Cracking of CFRP Using Electrical Resistance Changes Structural Health Monitoring Systems for a Steel Structure Using an Ambient Vibration Ultrasonic Detection of Fiber Orientation in Composite Laminates for Use of Vehicular Structures A New Position Sensor Using a Triangularly Shaped Piezoelectric PVDF Film Nondestructive Evaluation of Welding Residual Stress in Power Plant Facilities Using Instrumented Indentation Technique A Nondestructive Testing Method for Crack in Carbon Fiber Reinforced Concrete with Infrared Thermography Ultrasonic Linear and Nonlinear Parameters in Cyclically Deformed Cu and Cu-35Zn Alloy Quantitative Evaluation of Crack Size around a Rivet Hole Using an Ultrasonic Lamb Wave through a Neural Network A Study of Comparison on the Stress Intensity Factor of a High Polymer Material with Cracks, Holes and Inclusions Determining Representative Stress and Representative Strain in Deriving Indentation Flow Curves Based on Finite Element Analysis Structural Health Monitoring of Composite Laminates by Using Embedded FBG Optical Fiber Sensors Real-Time Displacement Monitoring System for High Temperature Steam Pipe of Fossil Power Plant Diagnosis of Defect Points in Materials Using Infrared Thermography Long-Range Pipe Monitoring with Elastic Guided Waves A Study on the Behavior of Ultrasonic Guided Wave Mode in a Pipe Using a Comb Transducer A Study on the New Static Photoelastic Experimental Hybrid Method Strength Diagnosis of Large Scale Structure Using Accelerometers Ultrasonic Transmission Characteristics of Continuous Casting Slab for Medium Carbon Steel Simultaneous Health Monitoring and Vibration Control of Structures Using Smart Materials Group Velocity of Lamb Wave S0 Mode in Laminated Unidirectional CFRP Plates Inversion of Eddy Current Test Signals Obtained from Steam Generator TubesFabrication and Characterization of Capacitive Micromachined Ultrasonic TransducerEvaluation of Elastic and Creep Properties of Perforated Materials by Finite Element Analysis Imposing Periodic Boundary ConditionsBoundary Element Analysis of Viscoelastic Fracture Molecular Dynamics Simulation of Nanoindentation on Folded Chain Crystal of Polyethylene Thermal Stress Analysis for Air Inlet Part of Ramjet Computer-Aided Static and Dynamic Properties Design of the Frame of Electrical Slag Founding FurnaceDegradation Evaluation of the Gas Turbine Hot-Gas-Path Component Application and Standard Error Analysis of the Parametric Methods for Predicting the Creep Life of Type 316LN SS Interaction of Mechanical Loading with Residual Stresses in Pressure VesselsUV-Irradiation Effects on Interfacial Strength between Thin Ceramic Film and Polymer SubstrateBending Performance Evaluation of Reinforced Aluminum Square Tube Beams Considering Local Buckling Behavior AGV System with Dual Motor Drive by Distributed Control The Mechanism of Postural Balance Control of High-Heeled Women Joint Reaction Forces during the Recovery of Postural Balance of Human BodyA Study on the Human Impulse Characteristics with Standing Shooting Posture A Study on the Demonstration Experiment of the Solar Hot Water Heater for DwellingsFinite Element Simulation of Grinding Stress for a Fiber Optic Connector (Ceramic Ferrule)Research on a Bionic Fuzzy-PID Vibration Control System for Ultra-Precision DeviceMotion and Environment Error Compensation for Ultra-Precision LatheFunctional Assessment of an Anti-Abrasive Elbow for Particle-Laden Gas FlowsLCD Glass Cleaning by Atmospheric Pressure Glow Discharge Plasma Local Stability Analysis in Satellite Design Improvement in Strength of 2024 Al Alloy by Enhanced Solution TreatmentResearch on Dynamic Characteristics of Assembled Thin Plates Structure by BEM On the Study of Effective Breadth for Stiffened Plate under Flexible Support ConditionInfluence of Nitriding Treatment on Practical Properties of Eutectoid Steel The Charpy Notch Impact Test of X70 Pipeline Steel with Delamination CracksEffects of Temperature and Loading Rate on Fracture Toughness Assessment of Geometry Independent Fracture Resistance Characteristics Based on Local Approach An Experimental Measurement of Toughness Locus for a Ductile Material The Effect of Sample Preparation upon the Fracture Toughness of Microsized TiAl Study on the Effect of Compressive Residual Stress on Fracture Toughness of Spring SteelThe Effect of Surface Treatment of Ti-6Al-4V Alloy SpecimensEffect of Interlayer Thickness on Strength and Fracture of Si3N4 and Inconel600 JointShear Strength and Fracture Behavior of SiCw/Al2O3 Composite-Carbon Steel Brazed Joints Effect of Strain Rate Variation on Fatigue Life of Spot Welded JointEffect of Mixing Process on the Fracture Behavior of HA/PLLA Composite MaterialA Study on Fracture Toughness of 9Al2O32B·2O3/AC4CH Alloy CompositesEvaluation of Ductile-Brittle Transition of Fracture Toughness by Material Degradation Evaluation of Fatigue Characteristic of a Real Waterworks PipeExperimental Investigation on the Proper Fatigue Parameter of Cyclically Non-Stabilized Materials A Study on Fatigue Properties of Sc Added Al 2519 Alloy Experimental Study on Fatigue Crack Growth in a Titanium Alloy An Experimental Study on Fatigue Crack Propagation under Cyclic Loading with Multiple OverloadsEffect of Cyclic Loading on Crack Propagation of X-70 Pipeline Steel in Near-Neutral pH SolutionEffect of Dynamic Strain Aging on Fatigue Softening Process of H68 BrassEffect of Plastic Working on Fatigue Properties of Ti-6Al-4V Alloy with NotchAssessment for Structural Stiffness and Fatigue Life on Self-Piercing Rivet of Car BodiesFatigue Properties of Non-Loosening Bolt with Double Screw MechanismDamage Characterization of Ceramic Matrix Composites (CMCs) during Tensile TestingEffect of Sintering Additives on Fabrication Properties of Liquid Phase Sintered SiC Mechanical Improvement of Multi-Walled Carbon Nanotube/Poly (Methyl Methacrylate) Composites Microstructure and Toughening Mechanisms in an Al2O3 Ceramic Matrix Composite Dispersed with LiTaO3 Particles Domain Switching and Crack Tip Opening Stress Variation in Ferroelectric Ceramics Avalanche Behaviour in Microfracturing Process of 3-D Brittle Disordered MaterialEffect of Element Size on Rock Shear Strength and Failure Pattern by Rock Failure Progress Analysis (RFPA2D) A Numerical Investigation of the Progressive Failure of Jointed Rock Slope Subjected to Transient Seepage The Failure and Falling of the Rock Mass in the Underground Mining Nonlinear Vibration Characteristics of Fatigue Damaged Reinforced Concrete Structures Numerical Study on the Fracture Evolution around Cavities in Rock Numerical Study of Elastic-Brittle Failure of Notched Openings in Rocks Numerical Approach to Investigating Pre-Existed Cracks in Rocks Numerical Study on Shear Strength and Failure Pattern of Jointed Rock under Shear Testing Analytic Analysis of the Influence of Friction on the Temperature Field of Rock Specimens A Numerical Study of Pillar Failure Based on a Cusp-Type Catastrophe Model Fracture Behavior and Water Migration in Heterogeneous and Porous RocksExperimental Study on the Mechanical Characteristics of Cracked Rockmass under Lateral Constraints Numerical Studies of the Influence of Heterogeneity on Rock Failure and Induced Earthquake Precursors Numerical Simulation of Crack Development in Reinforced Concrete Structures under Eccentric Loading Fracture Characteristics of Intermittent Jointed Rock Masses under Blast Loading Adjustment for Temperature and Deformation of Concrete Beams Web-Based Expert System in Fatigue and Fracture AnalysisDevelopment of Integrated Materials Database System for Plant Facilities Maintenance & Optimization Risk-Based Inspection of Refinery Units: A Practical Application System Oriented Plant Maintenance Development of Web Based Power Plant Maintenance Management System Mechanical Properties of CaB6 Sintered BodyEffect of Hydrogen Absorption on the Mechanical Properties of Palladium Study on Structural Integrity of C/C Composite Using as Core Restraint Mechanism in HTGR Effects of Water Absorption Cycles on Fracture Toughness in Laminated CFRP Composites Robust Design of Lamination on Flexural Properties of CFRP Shape Optimization of Cutouts in Laminated Composite Plates Using Solid Element A Study on the Mechanical Properties of the Honeycomb Sandwich Composites made by VARTM The Effect of a Honeycomb Core on the Mechanical Properties of Composite Sandwich Plates Design of Transversely Isotropic Tapered Plate Element in FRP Flexural Members Mechanical Properties and Microstructure of SUS304 Brazed Joint with Ni-Based Filler Metals Added Cr PowderDiffusion Bonding of Al 6061 Alloys Using an Eutectic Reaction of Al-Ag-CuEffect of Nanoscale SiC Particles on Strength Distribution of Joined Si3N4 to Inconel Alloy Active In-Process Control of Welding Distortion by Reverse-Side Heating Effect of Liquid-Phase-Impact Diffusion Welding Parameters on the Strength of Welded Joints of Aluminum Matrix Composite SiCp/ZL101 High Temperature Performance of 316L-SS Joint Produced by Diffusion Bonding Automated Fatigue Life Assessment for Welded Cruciform Joint Considering Welding Residual Stress Characterization of Oxide Film Formed on Austenitic Stainless Steel by In Situ Micro Raman Spectroscopy Laser Surface Cladding of Al-Si Alloy High-Speed Bonding of Resin-Coated Cu Wire and Sn Electrode with Ultrasonic Bonding for High-Frequency Chip Coil The Effect of External Electromagnetic Force in Gas Metal Arc Welding on the Transfer Mode On Mechanical Properties of Dissimilar Friction Welded Steel Bars Analysis of Spherical Void Growth and Coalescence in Metal Plastic Straining Process The Effect of Vacuum Thermal Cycling on LF6 Aluminium Alloy Welded Joints Effects of Sea Water Immersion and Temperature on the Strength of Spot-Welded Steel Plates Evaluation of Mechanical Properties for Narrow-Gap Weld Zone in Reactor Coolant Loop Effects of Current and Voltage on Welding Strength of Lap Joint with CO2 Welding Process Influence of Surface Finish of Cu Electrode on Shear Strength and Microstructure of Solder Joint with Sn-3Ag-0.5Cu Chemical Shrinkage and Residual Stresses in Laminated Composites during Cure Effect of Process Variables on Microstructure and Mechanical Properties of Wide-Gap Brazed IN738 Superalloy Evaluation of Fatigue Strength and Spot Weldability of High Strength Steel Sheet for Light Weight Automobile Body The Cause Examination of the Crack of the End Beam for Welding Structure Type Bogie Effect of Fiber Orientation on the Tensile Strength in Fiber-Reinforced Polymeric Composite MaterialsSmart Cure Monitoring Method of Carbon/Epoxy Laminates Using Electric Capacitance Change with Applied Alternating Current Frequency Experimental Study on the Mechanical Properties of Satin Carbon Fabric/Epoxy Composites Mesoscopic Modeling of Deformation Behavior of Semi-Crystalline Polymer A Study of Deformation Behavior in Polymer Control Effect on Fatigue Crack Propagation of TiNi Fiber Reinforced PMMA Composites