Preface and Conference OrganizationChapter 1: Theoretical and Computational ChemistryChemical Bonding Characteristics of Lanthanide Complexes: a Case of Valence StudyDevelopment of the Simulation Software on the Complex Reaction KineticsEnergy-Level Splitting of Cs2NaYCl6 Crystal Doped with PraeseodymiumNBO Analysis the Chlorine Anion Recognition Mechanism of the Urea-Based Involving Iodine and Fluorine Derivation Functional Molecular MaterialThe Computer Simulation of the Acid-Base TitrationThe Junction Width Effect on Inelastic Electron Tunneling Spectroscopy in Octanethiolate Molecular JunctionsThe Orientation Effect on Inelastic Electron Tunneling Spectroscopy in Octanethiolate Molecular JunctionsThe Geometry Structure and Molecular Vibrational Property of the ZeatinThe Geometry Structures and IR Properties of the Urea-Based Derivation Functional Molecular Materials Used for the Chlorine Anion RecognitionResearch on the Viscosity of CaF2-SiO2-Al2O3-CaO-MgO Slag System by the Thermodynamic SoftwareDensity Functional Study of H2S Adsorption on Small Agn (n = 1–5)Boundary Element Numerical Method for Electric Field Intensity Generated by Ten-Needle Electrodes in VacuumChapter 2: Analytical and Environmental Chemistry, Waste Disposal and Utilization TechnologyA Comparison of Three Indophenol Blue Methods for Measuring Ammonium in Five Types of Soils in ChinaCatalytic Voltammetric Determination of Vanadium in Crude Oil at Carbon Nanotube Paste ElectrodeComparison of Electrochemical Behaviors of Chalcopyrite, Bornite, Chalcocite and Covellite in 9K MediumComparative Study of Geo-Accumulation Index and Enrichment Factor in Source Apportionment of Atmospheric Particulate MatterDecolourization of Methylene Blue by PersulfateDiscrimination and Simultaneous Determination of 6-BA and KT by Polarized Synchronous Light Scattering and Synchronous Light Scattering SpectrumImprovement on Determination of the Components of Industrial Sodium PolysulfideInvestigations of the Isotropic G Factors for the Cubic Fe+ Centers in LiF and NaFGC/MS Analysis of Soluble Fraction by Microwave-Assisted Extraction with Acetone from Two Kinds of CoalIndirect Spectrophotometric Determination of Methimazole Using Phenanthroline-Fe(II)Hydrothermal Sulfidation of Hemimorphite with Elemental SulfurResearch on Determination and Preparation of Diphenic AcidStudies on Organic Carbon Distribution Characteristics of Organic- Mineral Complex in Sediment of Yitong RiverStudy on Effects of Different Types of Acid Rain on Nutritional Quality of PakchoiStudies on the Interaction Mechanism between Lithium Chloride and Amorphous Al(OH)3Survey and Evaluation of Heavy Metal Elements Pollution of Changchun Suburb LandThe Nitrogen Distribution Characteristics of Different Colloidal Dispersion Complex in Yitong River SedimentsAlkylpyridinium Hydrosulfate Ionic Liquids as Novel Additives for Zinc ElectrodepositionTwo-Phase Beckmann Rearrangement of Cyclohexanone Oxime under Milder Conditions in CyclohexaneEffects of Soil Amendments on Coastal Saline-Alkali Soil Improvement and the Growth of PlantsChromium Contamination in Sediments of Love River Mouth, TaiwanA Novel Method for Producing Phenazine by Using Waste from the Synthesis Process of 4-Amino-DiphenylamineA Post-Si CMP Cleaning Using BDD Film Electrochemical OxidationA Review on the Immobilization of Heavy Metals with GeopolymersAdsorption Properties of Pomelo Peels against Methylene Blue in Dye WastewaterAcid Endurance and Sorption of Zn2+ of Anaerobic Granular Sludge Acclimated by Flue Gas Pretreatment WastewaterAdsorption of Cu (II) on Thiourea Impregnated Gelatin MicrospheresAdsorption of Pollutants from Water with Carbon NanotubesAnalysis of Alumina Red Mud Wet Flue Gas Desulfurization (FGD) TechnologyApplication of Chemical Precipitation in Treating Ammonia Nitrogen from Excess Sludge LiquorDetermination of Thiocyanate in Desulfurization Waste Solution by SpectrophotometryEffect of Temperature on Recovery of Iron from Waste Slag of Pyrite ProcessingExperimental Research on Application of Tailings Mortar for Treatment of Copper-Nickel Acid WastewaterElectrochemical Oxidation of 4-Chlorophenoxyacetic Acid on Ti/SnO2-Sb2O5/PbO2 Anode for Waste Water TreatmentEvaluation of the Effects of Environmental Materials on Pb and Cd ImmobilizationInfluence of Sewage Sludge on the Slurrying Properties and Co-Gasification Kinetics of Coal-Sludge SlurriesLeaching Behaviors of Chemical Components from Steel SlagMicrowave-Assisted Preparation and Physical Characterisation of Iron Oxyhydroxides Adsorbents for Arsenic Removal from Aqueous SolutionsRemoval of Iron in Nickel Precipitation Residue Wastewater with Magnesium OxideRecovery of Nickel and Cobalt from Dimethyldithiocarbamate Precipitation of Pyrolusite Leaching ProcessStudy on Degradation of Dyes Wastewater by N-Doped TiO2Study on Disinfection of Oilfield WastewaterStatus on the Sulfur Resources Reclamation from the PhosphogypsumStudy on the Removal of Heavy Metals by BiomassStudy on Modified PVA- H3BO3 Immobilization Microorganism Method for Hydrogen Production from WastewaterStudy on Treatment Effect of Three Types of Industrial Wastewater by Ammonium Molybdate-Modified BentoniteStudy the Adsorption of Mold/Bentonite Composite Adsorbent on Acid Purplish Red in WastewaterStudy on CaSO3 and CaO as Additives of Slag CementSupercritical Water Oxidation Kinetics of Textiles Dyeing WastewaterStudying of the Grafting Modification on the PP Melt-Blown Non-Woven Fabric Used in Sewage FiltrationThe Experimental Study on Performance of the High-Content Slag Cementitious MaterialsThe Recycling Spent Catalyst of Furfural Hydrogenation with Pressure Sulphuric Acid LeachingTreatment Investigation on Retting Hemp Waste Water with the Synergy of Activated Carbon and MicrowaveTreatment of Industrial Dimethylamine Wastewater in a Distillation Tower at Lab ScaleFlocculation Performance of Trimethoxysilane Modified Polymer Flocculant for Wastewater from Effluent A/O BioreactorRemoval of Dichloroethylene in Water Using a Novel TCAS-Loaded ResinDegradating Organophosphosphous Pesticides Wastewater by Sonophotocatalytic Oxidation TechnologyInfluence of Reaction Temperature on Nitrate Removal from Water by SSITreatment of Membrane Concentrated “Young” Landfill Leachate by Coagulation SedimentationResearch in Surface Modification and Anti-Fouling of Polypropylene Porous MembraneKinetics of Leaching Silicon from the Acid Leaching Residue of PyrolusiteStudy on the Properties of Fe3+ Sorption to SrZr4(PO4)6 MaterialsAdsorption of Fluorine from Aqueous Solution by Chitosan Magnetic Microspheres of Loading LanthanumChapter 3: Fine Chemicals, Specialty Chemicals and ProcessesA Comparison of the H3PW12O40/MCM-41 and HY Zeolite for Alkenylation of p-Xylene with PhenylacetyleneApplication of Additives in 1,8-Cineole PurificationECF Bleaching of Pre-Hydrolyzed Larix Kraft Pulp for Production of Dissolving PulpEffects of Concentration of TiOSO4 and Fe/TiO2 Ratio on TiO2 Anatase White Pigment Production via Short Sulfate ProcessInfluence of pH on the Antioxidative Activity of Maillard Reaction Products Generation from Model Reaction of L-Ascorbic Acid and L-Lysine/L-MethionineIsolation of Oxymatrine from Alkaloids of Sophora Flavescens Ait. by H103 Macroporous ResinLiquid-Liquid Equillibria for the (Water + Methanol + Citral) System at 283.15 and 313.15 KOptimization of Difenoconazole Suspension Concentrates Formulation with Orthogonal MethodRapid Photochemical Synthesis of 6-Methyl-1-IndanoneSeparation and Purification of 1, 8 – Cineole by Molecular DistillationStudy on the Reaction Characteristics of Directional Synthesis of α-Terpineol from TurpentineSynthesis and Dispersion Properties of Lower Salt Resistance Sulfomethylated Phenol Formaldehyde Resin (LSMP)Study on Thermal Isomerization of Isopimaric AcidSynthesis and Solubilities of 2,6,7-Trioxa-1-Phospha Bicycle [2,2,2] Octane-4-Carboxylic Acid 1-Oxide in Selected SolventsSynthesis and Crystal Structure of the Lead(II) Complex with 5-Hydroxyisophthalic AcidSynthesis and Properties of Rosin-Modified LignosulfonatesThe Research on the Crystal Structure of Oxidized Starch by Microwave-Liquid Phase MethodThe Synthesis and Characterization of New-Style Anticorrosive Pigment Zinc MolybdateChapter 4: Catalyst, Inhibitors and ReactionA New Route to Synthesis of Titanium Silicalite-1 by Ball-MillingAn Experimental Study of Steam Gasification of Biomass over Precalcined Copper Slag CatalystsCatalytic Methoxycarbonylation of 1,6-Hexamethylenediamine with Methyl Carbamate to Dimethylhexane-1,6-DicarbamateCatalytic Decomposition of CCl2F2 over Solid Base Na2O/ZrO2Catalytic Degradation of Azo Dye Congo Red in Aqueous Solution by LiMn2O4Coaled Carbon-Based Solid Acid: a New and Efficient Catalyst for Click Synthesis of 3,4-Dihydropyrimidin-2(1H)-Ones under Solvent-Free ConditionsEffect of Alkali Precipitateing Agent on the Activity and Stability of Copper-Manganese Mixed-Oxides for the Water Gas Shift ReactionEffect of Different Aromatic Carboxylic Acid Ligands on the Catalytic Activities of Metal-Organic FrameworksEffect of the Ration of Cu to Mn on the Activity and Stability of Copper-Manganese Mixed-Oxides for the Water Gas Shift ReactionEffects of Alkali and Alkaline Earth Metals on NOx Reduction in Coke CombustionInfluence Factors of Denitration Study on Catalyst Mn-Ce/TiO2Hydrolysis of PNPP Catalyzed by the Dodecyliminodiacetate Nickel(II) ComplexesInfluence of Synthetic Methods on the Acid Catalytic Activity of NZP Family Compounds Modified by Doping AluminumKinetic Study of the Diels-Alder Reaction of Cyclopentadiene with Bis(2-Ethylhexyl) MaleateKinetics of the Reaction for Generation of Chlorine Dioxide from Sodium Chlorate and Hydrochloric AcidLa-ZrO2 and Ru-ZrO2 Promoted Co/SiO2 Catalysts for Fischer-Tropsch SynthesisLipase-Catalyzed Synthesis of Caffeic Acid Propyl Ester in Ionic LiquidPreparation of Light-Color Rosin and Preliminary Analysis of Decoloration MechanismPerformance of LaBO3/HZSM-5 Catalysts for Eliminating Soot from Diesel ExhaustRemoval of Formaldehyde Using Mn-Ce-Fe Oxide CatalystPreparation and Characterization of Palladium-Gold/4A Zeolite CatalystPreparation and Performance of Ni2P/TiO2-Al2O3 for HydrodenitrogenationProgress in Adjustment of Ionic Liquids Acidity Based on the AlkylationReaction Laws and Macro-Kinetics of 4-Carboxybenzaldehyde Hydrogenation over Pd/TiO2 CatalystSolvothermal-Derived Nanocrystalline TiO2 Supported Co Catalysts in the Hydrogenation of CarbonmonoxideStudies on the Esterification Synthesis of Alkyl Oleates in Solvent-Free System by Candida Sp. LipaseSynthesis and Hydrodesulfurization Performance of Bulk Ni-Mo-W Catalyst with High Surface AreaSynthesis of Polycarbonate Diol Catalyzed by Metal-Organic Framework Based on Zn2+ and Terephthalic AcidThe Direct Carboxylation of Terminal Alkynes with Carbon Dioxide Using Copper-Conjugated Microporous Polymer as CatalystSynthesis of Substituted Phosphotungstic Acids and their Catalytic Performance on Cationic Polymerization of β-PineneSynthesis of Three-Dimensionally Ordered Macroporous Co/SiO2 Catalysts by Sol-Gel MethodVanadium-Chromium Oxide: Effective Catalysts for Ammoxidation of 3-PicolineCatalytic Synthesis of Ethyl Acetate Using Ti2SnCStudy on α-Pinene Isomerization over MCM-41 Supported SO42-⁄TiO2Alcohol Interchange Synthesis of a Novel Titanium GlycolateEsterification of 5-Norbornene-2,3-Dicarboxylic Anhydride under Titanium CatalystEsterification of Menthol and Lactic Acid by Silicotungstic Acid Catalyst Supported on BentoniteInhibition Effect of N-Octyl-2-Pyrrolidonium Chloride on the Corrosion of Mild Steel in Acidic MediumInhibitory Kinetics of Isooctyl 4-Hydroxy-3-Methoxycinnamate on Tyrosinase-Catalyzing ReactionOligomerization of 1-Butylene to Lubricant Catalyzed by Bis(tetramethyl cyclopentadienyl) Zirconium Dichloride/MAOPreparation of 2-Methyl-1,4-Naphthoquinone(vitamin K3) by Catalytic Oxidation of 2-Methylnaphthalene with Sulfuric Acid as CatalystAdsorption Property of Cu-BTC for Dibenzothiophene SulfideAnalysis and Operation of Coking Crude Benzene Hydro-Refining ProcessDecoloration of Azo Dye by Electrodeless Discharge in WaterImmobilization and Thermostability Characterization of Cephalosporin C AcylaseCorrosion Behavior of API-5L in Various Green InhibitorsPreparation and Catalytic Performance of Ti(SO4)2/γ-Al2O3 Catalysts for Oligomerization of 1-ButeneResearch of Copolymerization Kinetics of CO and C2H4 Catalysed by PalladiumChapter 5: New Energy Development and Energy Chemical EngineeringBiodiesel Production from Silkworm Pupae Oil Using Solid Base CatalystConversion of Rice Straw to Bio-Fuel by Pyrolysis in Molten KCl-LiClChemical Equilibrium Prediction on Release of Na,K,Cl and S-Species during Gasification of Biomass, Soft and Hard Chinese Coal at Elevated Temperature and Pressure by Fact SageEffect of Macropore Structure on Desorption Diffusion Performance of N-Pentane on 5A ZeoliteEffect of Secondary Pore Distribution on Adsorption Rate and Stability of Molding 5A ZeoliteExperimental Study on SO2 and NOx Removal during Briquette CombustionAdsorption CO2 on Activated Carbon with Surface ModificationEffects of Extraction on the Desulfurization of FCC Diesel by Ultrasound Oxidation TechniqueEvaluation of the Role of Surfactant on the Surface Characterisation of CoalExperimental Research on Molding Biomass’s Carbonization HomogeneityFacile Preparation of Biodiesel Using Microwave HeatingNew Mechanism of Saving Energy and Reducing Pollution in Burning Processing of Emulsified OilInvestigation of Vanadium Containing Shale in Combustion BehaviorKF/Al2O3/Ceramic Membrane Catalyst for Biodiesel ProductionOptimization of Compressed Air Energy Storage System ParametersOptimization Study of Pyrolysis Process for Bamboo Waste by Orthogonal ExperimentReactors Used for Catalytic Combustion of MethaneLogistics Management of Bio-DieselChapter 5: New Energy Development and Energy Chemical EngineeringSimulation Research on the Coke-Oven Gas Pressurized Desulfurization ProcessResearch on the Fitting and Predicting Models for Coal Bed Methane Dynamic Productivity of Coal Mine AreaStudy on Coking during the Pyrolysis of Coal to Acetylene in the PlasmaStrategy for Renewable Energy Development in Rural Areas of BeijingSimulation of Chlorobenzene Distillation Using Dividing Wall ColumnStudy on the Preparation of Higher Alcohols Using Blast Furnace Gas and Coke Oven GasThe Influence of Injection Timing on Emissions Characteristics of a DI Diesel Engine Fuelled with Pistacia Chinensis Bunge Seed BiodieselThe Influence of Extraction on the Thermal Performance of Coal in Inner MongoliaResearch on Fuel Migration Phenomenon in the Sintering ProcessNon-Thermal Plasma and Catalyst System for Simultaneously Oxidizing SO2 and NOxEsterification of Oleic Acid with Methanol Catalyzed by P-Toluene Sulphonic Acid/MCM-41Hydrolysis of Cellulose to Produce Glucose in Ionic Liquid-Water MixturesChapter 6: Biological Chemistry, Pharmaceutical, Medicine and Biomedical EngineeringA Novel Biomaterial from Acrylamide Graft on NaOH-Urea Modified Rice HuskBone Distribution Simulation during Damage-Repair Bone Remodeling in Human Proximal FemurCharacteristic and Molecular Research of Glycerol DehydrataseChemoenzymatic Epoxidation of α-Pinene Catalyzed by Novozym 435Chemical Constituents and Anti-Acetylcholinesterase Activities of Dolomiaea wardiiChemical Constituents of Euphorbia altotibeticaCauses and Removal of Daemonorops margaritae Cane’s DiscolorationCharacterization of Magnetic Cellulose Microspheres Reconstituted from Ionic LiquidCrystal Structure, Antimicrobial Activity and Oxidation Resistance of N,N′-Bis(4-hydroxybenzyidene)azineDesign, Syntheses and Biological Evaluation of 3-Arylurea-5-Fluoroindolin-2-One DerivativesDesign, Syntheses and Biological Evaluation of 5-Fluoroindolin-2-One Derivatives with Urea LinkageDocking Studies on a Series of Novel Potent BRAF InhibitorsDifferential Expression of the Dmrt1 Gene from Ovaries of Diploid and Triploid Rainbow Trout (Oncorhynchus mykiss)Dynamic Absorption and Desorption Properties of HPD722 Macroporous Resin for Flavonoids in Emilia sonchifolia ExtractEffect of Formula on Microcellular Unsaturated PolyesterEffect of Sodium Ion on Flame Retardance and Thermal Degradation of Cellulose FiberEffect of Silane Coupling Agent on the Self-Cleaning Property of TiO2-Coated Cotton FabricsExpressing Xylanases in Escherichia Coli by Cell Surface DisplayExcellent Preparation of Azetidin-3-Ones from Propargylic Alcohols by Gold-CatalysisExtraction of Hemicellulose from Sugarcane Bagasse under Microwave RadiationKinetic Models of Hydrogen Production Process by Batch Anaerobic Fermentation from Contained Sugar WastewaterImmobilization of Lipase on MCM-41 Nanospheres: Exploring the Effects of Supports Morphology on the Lipase ImmobilizationLimit Test of Aristolochic Acid a in YishenJuanbi PillImproved Corrosion Resistance of NiTi Alloy by Coated with TiO2-SiO2-HAP Composite FilmsMatrine Determination in Compound Sophora Alopecuroides Suppositories by High-Performance Liquid ChromatographyInhibition of Serum PON Arylesterase Activity by Different Inhibitors and Correlation AnalysisNew α-Glucosidase Inhibitory Polysaccharides Isolated from Marine Green Algae Enteromorpha LinzaOptimization of the Water Extraction Technology of Flavonoids in Emilia Sonchifolia (Linn.) DCLiquid-Liquid Equilibria for Linalool in Aqueous Alcohol MixturesModification of Activated Carbon and its Application on Adsorption of UDMH GasOptimization of Riboflavin Production by Recombinant Bacillus Subtilis X42 Using Statistical DesignsPreparation and Properties of DCP-Crosslinked Biobased PolyamidePhoto-Degradation of Cypermethrin in Aqueous Solution Studied by HPLC-DADResearch on the Extraction of Dendranthema Morifolium Volatile Oils by Microwave-Assisted Steam Distillation ExtractionResearch on Active Selenium Polysaccharide in Artemisia ArgyiSpectroscopic Investigation of the Interaction between Rutin-Ce and LysozymeSpectroscopic Studies on the Binding Properties of Ofloxacin and Human Telomeric G-Quadruplex DNAStudy on Extraction of Natural Black Soya Bean Peptide and Antioxidant ActivityStudy on Limonium aureum Endophytic Fungi and its Antibacterial ActivityStudy of a upp-Based Counterselective Method for Large-Scale Deletion of Genome Fragments in Bacillus subtilisStudy on the Physical and Chemical and Mechanical Pulping Characteristic of Tobacco Stalk FiberStudy on the Thermodynamic Properties of Two Anti-Cancer DrugsStudy on Preparation of Abamectin Microcapsule with Interfacial PolymerizationStudy on Synthesis of (s)-3-(t-Butyldimethylsilyloxy)-7,7-Dichloro-2,2-Dimethyloctanoic AcidStudy on Synthesis of 2-(1-Tert-Butoxycarbonylamino-2-Methyl-Butyl)-Thiazole-4-Carboxylic Acid Methyl EsterStudy on Synthesis of 2,2-Dimethyl-3-Hydroxy-7-Octynoic AcidStudy on Synthesis of N-Methyldipeptide N-Ns-N(Me)-L-Ala-N(Me)-L-lle-OtBuSynthesis and Anti-HIV Integrase Inhibitory Activity of β-Diketo Derivatives of Mono-Substituted Calix[4]areneSynthesis and Biological Evaluation of Quinolone Acid Derivatives Having Polyhydroxylated Aromatics as HIV-1 Integrase InhibitionsThe Application of Silk Fibroin in Tissue Engineering and Drug Carrier AreaThe Preparation and Research of the Aerogel-Type Wood Composite MaterialThe Effect of KHCO3 on Photosynthesis of Eggplant SeedlingsSynthesis and In Vitro Anti-Breast Cancer Activity of Trametenolic Acid B DerivativesUtilization of Agro-Waste A. galanga Natural Fibers in CompositesSynthesis of N/Al Doped TiO2 Mesoporous Nanomaterials with Pyridine as a TemplateSynthesis of Ropivacaine under Ultrasound IrradiationThe Application of Ultrasonic Instead of Sulfur Dioxide in Processing of Strawberry WineUltrasonication-Induced Rapid Gelation of Wild Silkworm Silk FibroinsThe Influences of Aerobic and Anaerobic Conditions on PHB and Glycerin Yields in the Process of Lignin Degradation by Pseudomonas stutzeri P156The Study of Eleutheroside on Immunological Function of Aging RatsIsolation and Identification of Bacillus from Spontaneous Fermented SufuSynthesis and Fungicidal Activity of Novel N-Nitro-2-Pyrimidinamine DerivativesSynthesis and H+/K+-ATPase Inhibitory Activity of 2-Phenyl-6,7-Dihydrobenzofuran-4(5H)-one Oxime Ether DerivativesThermodynamical Study on Rare Earth L-Isoleucine Chlorate Complexes [RE2(lle)4(H2O)8](ClO4)6 (RE = Nd, Er)A New Approach for the Synthesis of 6,7-Dihydro-5H-Cyclopenta[b]pyridineSynthesis and Characterization of 4-(3′-Chlorophenylamino)-6-Methoxy Quinazoline DerivativesThe Effect by Sodium Sulfite on the Enzyme Activity and Stabilization of Race BranBioassay-Guided Isolation and Identification of a Acetylcholinesterase Inhibitors from Calophyllum polyanthumEffect of Vaccinium dunalianum Glycoside on Platelet Aggregation in AnimalsExtraction, Purification and Characterization of Polysaccharides from Clam (Ruditapes philippinarum)Isolation and Purification of Aloin a and Aloin B by High-Speed Counter-Current ChromatographyHijiki Seaweed (Hizikia fusiformis): Nutritional Value, Safety Concern and Arsenic Removal MethodIsolation and Identification of Thermostable Lactase-Producing Bacillus coagulans T242Optimization of Culture Medium and Conditions for Bacillus coagulans T242 Producing Thermostable LactaseMuscle Fiber Types, Characteristics and Meat QualityNanofibril Formation of Whey Protein Concentrate and their Properties of Fibril DispersionsOptimized Ultrasonic-Assisted Extraction by Using Response Surface Methodology and Structural Analysis of Flavonoids from Alliums cepa L. var. agrogatum DonProcess Study on the Ultrasonic Assisted Enzymatic Extraction of Flavonoids from Shepherd's PurseRapid Spectrophotometric Determination of Hypothermia Protection Activity of Sericin Peptides on Lactobacillus bulgaricusStudy on Antioxidant Activities of Pinus armandi franch Seed OilUltrasonic Extraction of Phenolics from Longan Seed by Response Surface MethodologyHemagglutination Characterization of Lectins from Four Traditional Chinese MedicinesExpression of Recombinant Human Cytomegalovirus Fusion Proteins pp150-pp65 Fragments and its ApplicationEffects of Potential Enviromental Pollutant Acaricide Fenpyroximate on Juvenile Turbot (Scophthalmus Maximus)L-Citrulline Protects against Rhabdomyolysis -Induced Acute Renal Failure in RatsOptimization of Preparation Technology on Medicated Serum of Yinqiaotiangan in MiceA Study of Amplifying Ovarian Cancer Biomarkers Concentration by an Ultrasonic DeviceApplication of Data Mining Technology on Analyzing a Series of Biomarkers for Diagnosis of Bone Metastasis from Different CancersOptimization of the Fusion Expression of Chicken β-Defensin Gal-3 in E ColiPreparation of Magnetic Chitosan Hyamine Microspheres and Separation of Phenolic Acids from Rubus Chingii HuSleep Electroencephalogram Analysis Based on Average Energy DissipationProtective Effect of Nitric Oxide Pathway in L-Citrulline Renal Ischemia-Reperfusion Injury in RatsStudy on the Preparation of Stigma Maydis Polysaccharide Oral LiquidStudies on Transformation of Alfalfa with Chicken β-Defensin Gal-3Study on N-(pyridin-4-Yl) Salicylamides as Antimycobacterial AgentsSynthesis and Antibacterial Activity of some New Quinoxaline-1,4-Dioxide DerivativesThe Interaction of Cytotoxic Sm (III) Complex of Plumbagin with Bovine Serum AlbuminThe MRTF Induced the Migration of Colon Cancer HT-29 CellRecent Advances of Application of Capillary Electrophoresis in Traditional Chinese Medicine AnalysisResearch of the Three-Phase PV Power Grid Inverter Based on PR Control Used in BiomedicineStudy on the Preparation of Activated Carbon from CorncobsChapter 7: Food Chemistry and IndustryAbsorbability of Active Carbon Influencing the Haze in Clarified Apple JuiceAn Absorption Assessment of Eggshell Calcium Citrate Treated by PEF in MiceAntimicrobial and Antioxidant Activities of Deer Blood Hydrolysate on Fresh Beef during Refrigerated StorageAnti-Oxidant Activity of Anthocyanins of Black Soybean In VitroApplications of Ultrafiltration-Nanofiltration Membrane Continuous Combination Technology for Refining of Milk-Derived OligosaccharidesAntioxidant Properties of Deer Blood Hydrolysate and the Possible Mode of ActionEffect of Dense Phase Carbon Dioxide on Inactivation of Polyphenol Oxidase and Peroxidase in Hami Melon JuiceEffects of Acid Hydrolysis and Annealing Treatment on the Physicochemical Properties of Mung Bean StarchEffect of Germination on Physicochemical Properties of Tartary Buckwheat StarchEffect of High Temperature Pretreatment and Gaseous Ozone on Storage Quality and Microbiological Safety in Fresh Ginger (Zingiber officinale Rosc.)Effect of Processing on the Secondary Haze Formation in Clarified Apple JuiceEffect of Ultrasonic Wave on the Physical Properties of Cassava StarchEffects of Different Cooking Methods on Nutritional Characteristics of Boletus aereusFermentation Process Optimization of Mulberry Black Tea by RSMHPLC Analysis of Flavonoids Compounds of Purple, Normal Barley GrainMixed Bacterial and Physico-Chemical Index of Changes in Sausage Fermentation ProcessOptimization of Ultrasonic Extraction of Total Flavonoids from Litchi (Litchi chinensis Sonn.) Seed by Response Surface MethodologyPreparative Separation and Purification of Lancifodilactone C from Schisandra Chinensis (Turcz.) Baill by High-Speed Counter-Current ChromatographyResearch on Distribution Management System Oriented Food IndustryResearch of Preparation Factors on Magnetic Cassava Starch MicrospheresStudies of Rice Flour Gelation in the Processing of Rice NoodlesRecovery of Sweet Potato Protein Materials from the Starch WasteRheological Properties of Fresh Jujube PulpStudy on Application of Oat Flour in Quick-Frozen Dumpling ProductionStudies on the Quality Change of Cloudy Jujube Juice during StorageStudies on the Aqueous Extraction Method of Sesame OilStudy on Enzymatic Fermentation of Fish Sauce by Eel HeadsStudy on Ultrasonic Assisted - Precipitation Method Combined Purification of Tea SaponinThe Effect of Different Washing Treatments on grass carp SurimiVolatile Analysis of Maca (Lepidium meyenii Walp.) by TCT-GC/MSDNA Fingerprint and Determination of Functional Components for Rice with Diabetes PreventionHeavy Metal Concentrations in Canned Fruits of Litchi chinensis, Prunus persica, and Ananas comosus Marketed in the PhilippinesOptimization of Culture Media and ITS Identification of Tricholoma matsutakeQuantitative Analysis of Lead, Cadmium and Chromium in Different Brands of Junk Food Marketed in Metro Manila, PhilippinesSimultaneous Determination of Four Herbicide and Pesticide Residues in Chinese Green Tea Using QuEChERS Purification Procedure and UPLC-MS/MS AnalysisMicrowave-Assisted Extraction of Capsaicin from Chili Pepper PowderChapter 8: Chemical Machinery, Equipment, Chemical Manufacturing ProcessingAnalysis and Study of the Structural Characteristics of Ultrafine Stirred MillEffects of Dimensions on the Fluid Flow and Mass Transfer Characteristics in Wavy-Walled Tubes for Steady FlowExplosion Simulation for Petrochemical Plant with Water SprayExperimental Investigation on Prestress during the Manufactural Process of Integrated Multilayer Wrapped VesselResearch of Crushing Mechanism Based on Pulverized Coal Sample Preparation SystemResearch on PLC Based Pulverized Coal Sample Preparation Transfer MechanizeResearch on the Relational Model of Corrosion Factors of Air Cooler on Atmospheric TowerStudy on Coking Mechanism during the Pyrolysis of Coal to Acetylene in the PlasmaStudy on Reaction Mechanism during the Pyrolysis of Coal to Acetylene in the PlasmaStudy on Fluid-Flow Characteristics of a New Type Efficient Uniform-Flow Packed EquipmentChapter 8: Chemical Machinery, Equipment, Chemical Manufacturing ProcessingThe Analysis and Detection Research of Different Coal Samples Based on near Infrared SpectroscopyThree Dimensional Numerical Simulation of Solid-Liquid Separation of Horizontal Spiral Sedimentation CentrifugeThe Experimental Study on Performance of Single Screw Expander with Air as Working FluidMaterial Choice of Rotating Seal Joint of the Device Yellow Phosphorus Extraction from Phosphorus Sludge at Moderate TemperatureThe Influence of Different Stirring Methods on Crystallization Process of Ammonium PersulfateCause Analysis of Plate Pitting Corrosion in Lubricating Oil Cooler of Main Equipment in Datang Weihe Thermal Power PlantChapter 9: Non-Ferrous Metal Material, Steel and Alloys TechnologyAir and Wet Air Oxidation of 9Cr-3Co-3W Creep Resistant Ferritic Steel at 650 °CEffect of Casting Temperature on the Microstructure of Al-Zn-Mg-Cu Aluminium Alloy Billets Prepared by LFEC ProcessEffect of Ag Addition on the Microstructure and Properties of Cu-5Cr Base AlloysEffect of Rare Elements on Corrosion Behavior of SPCC in CSPEffect of Austenite Transition under Pulsating MagnetismEffect of Vanadium on Delayed Fracture Resistance of High Strength Pre-Stressed Concrete Steel BarEffect of Process Temperature on the Microstructure and Properties of Low-Temperature Gas Multi-Component Thermochemical Treatment 45CrMoV Alloy SteelEffect of the Current Density on Oxygen Overpotential and Corrosion Rate of the Al/Pb-Ag-Co Anodes for Zinc ElectrowinningEffect of Titanium on the Partition Behavior of Alloying Elements in Single Crystal Superalloys Containing RheniumEffects of Rolling Temperature on Through-Thickness Deformation and Recrystallization Textures in Heavily Rolled Silicon SteelEffects of Extrusion Methods and Powder Carriers on Powder Forming and Precursor Foaming Behavior in the Preparation Process of Aluminum FoamHot Deformation Behavior of Al-Zn-Mg-Zr Alloy with Trace Amounts of ScHigh-Cycle Fatigue Fracture Behavior of Microalloyed Bainitic Steels for Hot ForgingOptimization of Liquid Steel Flow in an Industrial TundishPhase Transformation of P91 Steels upon Cooling after Short Term Overheating above Ac1 and Ac3 TemperatureResearch on the Process of High Silicon Aluminum Alloy in MEDMPreparation of ITO Target by Molecular Dynamics Simulation with Normal Pressure Sintering MethodStudies on the Influence of Ti on Mechanical Properties in A356 AlloySimulation of Dynamic Recrystallization for Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Alloy in β Processed Using Cellular AutomatonResearch on Band Microstructure and Annealing Process of CrMo Steel Used for Precision Ball ScrewSimulation of Machining of Incoloy 907 with Thermodynamical Constitutive EquationSolidification Characteristics of Al-1Fe-0.5Si-XMg Die-Casting Alloys for High Conductivity Demanding ApplicationsThe Divorce Eutectoid Transformation in the Higher Mn Bearing SteelThe Research on the Deoxidization Process of Calcium Based DeoxidizerThe Study on the Fabrication of Nano-Structured Steel by Cold Rolling and Annealing of MartensiteThe Lab Research on EH40 High Strength Shipbuilding SteelFirst-Principles Calculations for Electrical Proterties of the Lead Anode PlateDetermination of the Content of Ultra-Low Sulphur in PM Superalloy FGH96 by Infrared Carbon-Sulphur DetectorPhase Diagram Simulation and Investigation of Microstructure of Ni-Based AlloysStability of α Phase in Ti Alloys Containing Al or Zr from First-Principles CalculationsMechanical Properties Research of Anionic Polymerized PA6/ABS AlloyCluster Structures and Evolution in Liquid Al-Pb AlloysInterfacial Microstructure Investigation of Diffusion Bonded New Ni-Cr-W Superalloy Using Cu InterlayerTandem Extraction of Gold (I) from Cyanide Leaching Solution by Weak-Strong Alkaline Anion Exchange FiberResearch on MRT3-BA Steel in Macro InclusionsStudy of Large Inclusions in Casting Slab of 45# SteelStudy of Micro-Inclusion of 20g SteelStudy of Micro-Inclusion of Grade 45 SteelStudy on the Large Inclusions in 20g SteelChapter 10: Composites and TechnologyA Series of Metal Molybdates as Flame-Retardants and Smoke Suppressants for Flexible PVCA Review on R&D Status and Application of Fly Ash Cenospheres in Microwave AbsorptionApplication of POD Projection to Orientation Optimization of Laminated Composite DesignCuring Reaction Kinetics of Epoxy/MWCNT-P CompositesDielectric and Infrared Properties of Plasma Sprayed Nano β-SiC/ Al2O3 Agglomerate Composite Absorbing CoatingsEffect of Compositions of Penetrating Agents on the Microstructure of Tungsten-Chromium Surface CompositeEffects of Compound Additives on Properties of Cermet Inert AnodesFabrication of Continuous Nickel-Coated Carbon Fiber Reinforced Aluminum Matrix Composites Using Low Gas Pressure Infiltration MethodEffects of Different Size and Shaped Magnesium Particles on the Properties for Fuel Rich Solid PropellantFacile Fabrication of Superhydrophobic Surface via SiO2/Fluoro-Containing Polymer Composite ParticlesFlame Retardant Epoxy Resin Containing Magnesium PhosphinateInterfacial Debonding Force and Shear Strength of Sugar Palm (Arenga pinnata) Fiber Reinforced Composites by Pull-Out TestPorous Sepiolite/Starch Composites：Preparation, Structure and Absorption PropertiesPreparation and Application of Inorganic Nanoparticle-Polymer CompositesPreparation and Characterization of PA 6/EPT BlendsPreparation and Characterization of SiO2-PMMA with Different Shell Thickness Using AGET ATRPPreparation and Properties of Glycerol Plasticized Starch/ Sepiolites CompositesPhotoluminescence of Y2O3:Eu3+ Prepared by the Wood TemplatePreparation and Water Absorbency of Superabsorbent Kaolin/PAA-AM CompositePreparation and Characterization of Graft Copolymer of Acryloyloxyethyl-Trimethylammonium Chloride and StarchPreparation and Electrochemical Properties of Poly(p-Chloroaniline)Preparation of OMMT and Light-Colored and Transparent PI/OMMT Hybrid Composite FilmsPreparation of SiC Powders by Utilizing Rice Husk Ash from Biomass Cogeneration PlantResearch on Explosive Compaction Technology and Properties of WC/Cu CompositesResearch on Flexible Resin’s Effect for Composite T-JointProgress in Catalytic Preparation of Carbon/Carbon CompositesResearch on the Adsorption Abilities and Mechanism of the Grafted Composite Adsorption Material PEI/SiO2 towards p-NitrophenolStudies on Influencing Factors of Polyketone Molecular Weight by Palladium Catalyzed Alternating Copolymerization with Carbon Monoxide and EthyleneResearch Progress of Synthetizing PolydichlorophazeneStudy on Anti-Aging Performance of Composite Materials of PP-G-an /PP /SiO2Research of Interface of Carbon Fiber Reinforced PA6 by In-Situ Anionic PolymerizationResearch of Penetration Model for Carbon Fiber Reinforced Nylon Composite MaterialStudy on Crystallinity of Carbon Fiber Reinforced Nylon 6 Interface by In-Situ Anionic PolymerizationStudy on Production Technique of the Metal Reinforced Polyethylene Spiral Corrugated PipeStudy on Synthesis of 2-Hydroxy-6-Naphthoic Acid from 2-Naphthol and Improve the Synthetic ProcessSynthesis Star-Shaped Cationic Polyacrylamide- Dimethyl- Diallyl- Ammonium- Chloride by "Core-First" MethodStudy on Thermal Conductivity of Metal/Polymer Composites Based on Software ANSYSThe Effect of Addition of Multi Wall Carbon Nano Tubes (MWCNT) Reinforcement to the Characteristics of Carbon Composite Bipolar PlateSynthesis,Characterization and Flocculability of a Poly (p-Ethylstyrene -Acrylamide- Propenohydroxamic Acid)Synthesis and Characterization of Cellulose Acetate Blend Ultrafiltration Membranes： The Effect of Degrees of SubstitutionSynthesis of a Cellulose-Magnetic Nanocomposite in Ionic LiquidThe Residual Bending Properties after Impact of CFRP Laminates with VoidsThe Residual Tensile Properties after Impact of CFRP with Different PorositiesThe Analyses of Glass-Reinforced Plastic Pipeline Failures and Possible SolutionsThe Application of Fiber Reinforced Concrete in Cement Concrete PavementWater Absorbency Study of the Low-Cost Composite--Eupatorium adenophorum-Graft-Acrylic Acid/AcrylamideWater Resistance Research of Anionic Polymerized PA6/ABS AlloyThe Synthesis of Porous TiC-TiB2-NiAl Composites by SHSDetermination of Rare-Earth Elements in Titanium Matrix Composites by ICP-AESPreparation and Characterization of Expandable Graphite Decorated with Rare Earth Nanoparticles CeO2Chapter 11: Micro/Nano Materials and Preparation TechnologyCharacterization of Nano TiO2 Modified FabricsCharacterization of Nanoscale Precipitates in 10Ni3MnCuAl Steel by Three Dimensional Atom Probe TomographyDevelopment of Preparation of Boron Nitride NanotubesDroplet Size and Shape in a Flow-Focusing MicrodeviceEffect of Calcinations on Characterizations of Fabricated Nano Manganese FerriteElectrochemical Performance of Iron and Cobalt Tetrapyrazinoporphyrazines Supported on Multiwalled Carbon NanotubesEffect of Temperature and Synthesis of CuO Nanostructures on Cu Plate by Thermal MethodEffect of Temperature and Synthesis of ZnO Nanostructures on Zn Plate by Thermal MethodEffect of Temperature on Preparation of Ammonium PolyphosphateEffects of Activation Conditions on Preparation of Coal Tar Pitch Based Mesoporous Activated Carbon Using Template and KOH Activation MethodEffect of Wet Ammonia on Crystalline Forms of Ammonium PolyphosphateFabrication of V-Doped TiO2 Nanoparticles and Photocatalytic Studies under Visible LightFast Synthesis of High-Silica ZSM-5 Zeolite via a Simple Vapor-Phase Transport MethodEffects of Surfactant Concentration on the Microstructures of TiO2 Hollow Spheres by Hydrothermal MethodEnhanced Microwave Absorption by Incorporating Fe3O4 Nanoparticles into Ordered Mesoporous CarbonFacile Solvothermal Method to Synthesis Eu Doped TiO2 Hollow Microspheres with Enhanced PhotoluminescenceHydrothermal Synthesis of EuF3 NanorodsHydrothermal Synthesis of 3D Flower-Like Bismuth Trisulphide MicrocrystallinesNanocrystalline TiO2 Powder Materials Anticipates at Disinfect the Appliance in the Beaded PaintNanostructural Characteristics and Electrical Conductivity of Copper Nanoparticles-Polypropylene Nanocomposites for Bipolar Plate ApplicationPreparation and Optical Properties of CuS Nanochains by a Solvothermal MethodRapid Synthesis of Non-Crosslinked and Monodisperse Polystyrene MicrospheresPH Dependence of the Size and Shape of the Gold Nanoparticles Prepared by MacromoleculesPreparation and Properties of Optically Transparent Chitin Nanofibers Sheet by Different Simple Mechanical MethodsPreparation and Research of Coupling Agent Modified Organophilic MontmorillonitePreparation of Core-Shell Microspheres by Changing Reaction SolventPreparation of Superfine Aluminum Hydroxide Fine Powder by Spontaneous NucleationPreparation and Magnetic Properties of La Substituted Barium Ferrites Synthesized by the Oxide one Pot Synthesis (OOPS) ProcessStudy on the Condition of Preparation of Magnet Activated Carbon by Pyrolytic ProcessStructural and Photocatalytic Properties of CuO Nanorods Using the Hydrothermal Treatment MethodStructural and Photocatalytic Properties of Fe-Dope TiO2 Nanostructure Using the Hydrothermal Treatment MethodStudy on Crystalline Transformation in Preparation of Ammonium PolyphosphateSynthesis and Luminescence Properties of YVO4:Eu 3+ Nanocrystals by a Sol-Gel MethodSynthesis and Photocatalytic Activity of Rod-Shaped Mesoporous TiO2 Using Poly (ethylene glycol) as TemplatesSynthesis of Monodispersed Fe3O4 Magnetite Nanoparticles by Ethylene Glycol Solvothermal MethodSynthesis of the Mesoporous Silica with Different Morphological Structure by Modifying the Solution ConditionsThe Application of Sodium Citrate in Co3O4 Nano-Particle Dispersing SystemThe Effect of Alcoholic Reducing Agent and CTAB on Morphology and Structure of VO2 (M) Nano-ParticlesSynthesis of Novel Carbon Spheres and Study on Graphitization ProcessSynthesis of TiOF2 Ball-Flowers and the Phase Transitions to TiO2Synthesis and Characterization of Barium Strontium Titanate Nanocrystalline Powders Prepared by Direct Reactive Precipitation Method from SolutionThermal Stability of MWCNTs Reinforced NanocompositesSynthesis of TiO2 Nanostructure by DC Reactive Magnetron Sputtering and Hydrothermal TechniqueSynthesis, Properties and Applications of Polymer-Grafted SrAl2O4: Eu2+, Dy3+Ultrasound-Assisted one-Pot Synthesis of Dispersable Nano-MnO2 in the Presence of NanocelluloseExploration of the Structures of the Magnetically Induced Self-Assembly Photonic Crystals in a Solidified Polymer MatrixStudy on Preparation of 1H,1H,2H-HeptadecafluorodecenePreparation and Characterization of PVA-MSA/mCS Bipolar MembraneChapter 12: Ceramic, Refractory and Strong MaterialsDielectric, Piezoelectric and Ferroelectric Properties of (1-x)K0.5Na0.5NbO3–xBiGaO3 Lead-Free CeramicsEffect of Different Sintering Additives on the Reaction-Bonded Si3N4/SiC Composite CeramicsEffects of Sintering Temperature on Microstructure and Phase Formation of Nitrides Bonded MgAl2O4-CrefractoryInfluence of Silicon Nitride on Properties of Corundum Based CastableInfluence of Na2CO3 on Hydration Resistance of MgO-Al-C BricksStudy on Effect of Sintering Pressure on the Properties of Diamond BitSynthesis and Application of Titanium CarbonitrideThe Influence of AST Doping on the Dielectric Properties of MgTiO3-Based Ceramics Fabricated by Soild-State SinteringSynthesis of Al8B4C7 from Aluminum, Boron Trioxide and Activated Carbon Mixed PowdersSynthesis of MgAl2O4-SiAlON Composite Powders by Carbothermal Nitritdation of Forsterite and AluminaWear Mechanism and Self Lubrication of Engineering Ceramics at Elevated TemperaturesThe Influence of B4C on Mechanical Properties of MgO-SiC Based Refractory CastablesPreparation of Zirconium Titanate Ceramics by Alloy Oxidation MethodEffect of CNTs Content on Properties of AlN-CNTs Composite CeramicResearch on the Effect of Holding Time on Diamond Drill Bit PerformanceEffect of Additive on Phase Composition and Microstructure of Silica Brick MatrixChapter 13: Optical/Electronic/Magnetic, New Functional and Energy MaterialsAnalytical Solutions for Laminated Transversely Isotropic Magnetoelectroelastic PlatesAnisotropy in Third-Order Nonlinear Optical Susceptibility of the Stretch-Oriented Chrysophenine-Doped Poly(vinyl alcohol) FilmsCalculation of the Interaction Forces between Superconductor and Permanent Magnet Using Equivalent Current Loops in Zero Field CoolingArtificial-Neural-Network Prediction of Device Behaviors in Submicron MOS TransistorsCharge Programming and Erasing Characteristics of the Submicron Stacked-Gate Flash CellsEffect of Ca Doping on Crystal Structure of the Misfit-Layered Bi-Sr-Co-O Thermoelectric MaterialsEffects of Surfactants on Particle Size and Luminescence Properties of Ca1.98MgSiO5:Eu2+0.02 Phosphor Prepared by Sol-Gel MethodEffects of Annealing in Air on Structure and Properties of Al Films Prepared by Thermal EvaporationFluorescence Enhancement of Europium(III) Perchlorate by 2,2′-Dipyridyl on Bis(benzylsulfinyl)methane ComplexFluorescence Enhancement of Europium(III) Perchlorate by Salicylic Acid on Phenyl-Naphthoylmethyl Sulfoxide Complex and Luminescence MechanismGrowth and Characterization of CdZnTe Bulk Crystals Grown by Temperature Gradient Solution GrowthFabrication of Microcrystalline Cellulose/CdS Nanocomposites and their Photocatalytic PropertiesLuminescent Properties of a Novel Red-Emitting Phosphor Ca1.95P2O7:0.05Eu3+, B3+, M+ (M=Li, Na, K) for White Light-Emitting DiodesImpact of the Oxygen Content on the Electronic Properties in Epitaxial Thin Films of Electron-Doped La0.9Hf0.1MnO3Manganese K- and L3-Edge X-Ray Absorption Fine Structure Study of Zn1-xMnxTePhotoluminescence and Afterglow Behavior of Eu2+, Dy3+ and Eu2+, Sm3+ in Sr3Al2O6 MatrixPhotoluminescence Properties of Sulfur-Doped Sr3SiO5: Eu2+ Phosphor for White LEDsPreparation, Characterization of Low Infrared Emissivity Stealth CoatingStrong Perpendicular Magnetic Anisotropy with High Thermal Stability in Annealed Co/Native Oxide/Pd MultilayersThe Effect of Oxygen-Rich Condition on Properties of ZnO: In Films by SputteringTheoretical Studies of the Spin Hamiltonian Parameters for Fe0 and Mn– in Silicon CenterThe Influence of 4,4’-bis[6-(acryloyloxy)-hexyloxy]biphenyl Contents on the Electro-Optical Properties of Polymer Stabilized Liquid CrystalsStudies on the Properties of LiFePO4 -C/Li Batteries Doped Carbon by Vapor DepositionFirst-Principles Study on Energy Property and Stability of Y3Al5O12 CrystalTheoretical Study on Au-Doped Ge Semiconductor ClustersElectropolymerization and Electrochromism Properties of Poly(m-trifluoromethylaniline)First-Principle Study of Structural and Electronic Properties of Ti-Doped SnO2Preparation of La0.9SR0.1Ga0.8Mg0.2O3-δ Electrolyte Films Deposited by RF Magnetic SputteringStudy on Electronic Structure of the Ti Ion Implantation Al2O3 (0001) Surface by First PrinciplesComparative Investigation of Optical Properties in Tm3+/Er3+/Yb3+ Co-Doped Oxyfluoride Tellurite and Germanate GlassesInfluence of Aging Treatments on the Microstructure Evolution in Mg-8.8Hg-8Ga (wt%) AlloysStudy on the Dielectric Properties of Biomass Material of Tobacco StemsThe Durability of Water and Oil Repellent Finishing of Cotton Fabrics with IsocyanateThe Effect of Polymethyl Methacrylate（PMMA）for the Fabrication of Polyacrylonitrile (PAN) FiberMethod of Preparation Magnesium-Based Alloy Film and its Hydrogen Storage PerformanceSynthesis and Crystal Structure of a Fe(II,III) Complex with 2-(4΄-Chlorine-benzoyl)-benzoic acid and 3-(2-Pyridyl)pyrazoleElectrochemical Properties of GaCl3 in Ionic Liquid [C2mim][GaCl4]Hydrothermal Synthesis and Crystal Structure of a Cadmium ComplexA Design for the Large-Angle and Wide Wavelength Antireflective of FilmThermal Effects Caused by Inclusions in Optical Films Irradiated by CW LaserStudy on the Synthesis CMCAB Electro Spinning Carbon-Coated LiFePO4 Anode MaterialsSynthesis of LiMn0.7Fe0.3PO4/C Composite Cathode Materials for Lithium-Ion BatteriesThe Side-Chain Effects on Photovoltaic Properties of Copolymers Based on Phenothiazine and ThiopheneDesign and Fabrication of SiO2 Coated Al Thin Films with High Performance for Solar Front ReflectorsSynthesis and Application of Novel β D-π-A Porphyrin Dyes in Dye-Sensitized Solar CellsSupercapacitive Properties of Hydrothermally Synthesized γ-MnOOH NanowiresConductive Polymers Based on Phenothiazine-Benzothiadiazole: Synthesis, Characterization of PhotovoltaicsChapter 14: Building Materials and ArchitectureA Kind of New Type Composite Structure Column of ResearchApplication and Practice of Local Materials in the Village RemediationApplication and Research Progress on Eco-CementDevelopment of Green High Performance ConcreteEffect of Epoxy Emulsion on the Mechanical Properties and Permeability of Cement MortarExperiment for the Mix Proportion Design of Green and Self-Compacting C40 ConcreteExperimental Study on Size Effect in Strength of Pervious Concrete and its Associated FactorExperimental Study on Compressive Performance of Polyurethane Composite PanelExperimental Research of the Rapid Set Cement Concrete for Rapid Repair of Concrete PavementsInfluence of Additives on Modification of Sodium Silicate and its Molding Sand PropertiesInfluence of Granulating Equipment on the Quality of Artificial AggregateInvestigation on Application of Iron Mine Tailing Sand in Building MortarInfluence of Blast Furnace Slag on the Mechanical Properties of High Performance ConcreteRelationship between Mineral Characteristics and Frictional Property of Pavement StonesResearch on Evaluation Index of Water Stability for Asphalt MixturesRoad Performance of Asphalt Binder Modified with Natural Rock AsphaltStudies on the Sorption of N2 and CO2 over Hardened Cement PasteResearch Progress on Early Autogenous Shrinkage of Cement-Based Cementitious MaterialsSize Effect on Compressive Strength and Modulus of Elasticity in High Performance ConcreteThe Structural Performance of Precast Lightweight Foam Concrete Sandwich Panel with Single and Double Shear Truss Connectors Subjected to Axial LoadThe Study of the Axial Compressive Bearing Capacity of Core Column with High Strength Concrete Filled Steel Tube Based on the Twin Shear Unified Strength TheoryA Brief Discussion on Settlement Pattern of Ancient Village in JiajiazhuangAnalysis on the Decoration of Traditional Dwellings in Shanxi Province - Taking Dwellings in Ding Village of Xiangfen County as an ExampleAnalysis on the Urban Space Design of Small and Medium-Sized City at both Banks of Waterfront - Take Urban Space Design of the City at both Banks of Waterfront at Heshun County Town as ExampleDynamic Characteristics of Steel Stay Cable in Civil Engineering Using Field TestingInvestigation of the Pozzolanic Reaction in Silica Fume-Cement Paste by 29Si MAS NMRChapter 15: Mechanical Behavior & FractureA Finite Cylindrical Cavity Expansion and Penetration Model of Exponential Strain-Hardening MaterialsApproximate Elastodynamic Directional-Cloak with Isotropous Homogeneous MaterialComparison of Rheological Behavior of Three Gel-Type Vehicles for Printing InkFailure Analysis of Pin Joint of Carbon/Epoxy Composite PlateEffects of Current Stressing and Isothermal Aging on the Tensile Strength of Microscale Lead-Free Solder Joints with Different Joint VolumesFracture Analysis of GCr15 Steel Ball Screw NutImpact of Metallic Foam’s Microstructure to its Mechanical PropertyConstitutive Modeling of Mechanical Behavior of Metallic Materials with Nanocrystalline Surface LayerThe Simulation Analysis of Tension Leveling for Improving the Shape Defects of StripChapter 16: Material Forming, Machining and Joining, Testing and EvolutionEffect of Die Forms on Rivet Deformation and MicrostructureEffect of Machining Parameters on Surface Integrity in Dry Turning of Inconel 718Experimental Investigations and Finite-Element Modeling of Thermoplastic Effect during Tensile Tests of Metal MaterialFabrication of Micro-Pins by Electrochemical MachiningFriction Correction and Constitutive Equation of a Non-Quenched and Tempered Steel during Hot DeformationInfluence of Rolling Lubrication for Self-Excited Vibration on Tandem Cold Rolling MillInvestigation on Forming Process of Automobile Trunk Side Panel Based on Numerical Simulation TechnologyNumerical Simulation the Stress Uniformity in Split Hopkinson Pressure Bar TestingMicrostructural Evolution of AuSn20/Ni Joint during AnnealingResearch on Formability of Aluminum Alloy 2024 Sheet by Viscous Pressure FormingResearch on Intelligent Precise Pass Design Based on Spline Finite Strip MethodStudy on Formability of TRIP Steel in Incremental Sheet FormingStatus and Prospects of Indirect Squeeze Casting TechnologyThe Optimal Parameters Design of Drawing for the Y Type Teeth Using Four Y-Slot Die-WheelThe Effect of Forming Parameters on the Sheet Stretch in Incremental Sheet Forming (ISF) Process on CNC Lathe MachineWeldability of Ti-Microalloyed Advanced High Strength Steel CP 800The Blank Optimization of an Automotive Fender Skirt in the Process of Sheet Metal-Forming Based on one-Step Simulation MethodThe Relationship between Phase Structure and Melting Characteristics of High Cesium Content KF-CsF-AlF3 Aluminum FluxCTOD Evaluation for HAZ Toughness of Offshore Structure Steels with Heavy Thickness Based on API RP 2ZSynchrotron Radiation SAXS Study of Microvoids Structure of PAN Fiber during Spinning ProcessChapter 17: Surface Engineering/CoatingsCharacterization of a Chromium-Free Passivation Coating on Hot Dip Al-Zn Allay Coated Steel SheetsCorrosion Behavior of Alloys for Hot DippingDevelopment of a Methanol Resistant Epoxy CoatingEffect of Contact Angle Hysteresis on Liquid Bridge while Sphere Particles are in Relative MovementEffects of Alkaline Nano-SiO2 Abrasive on Planarization of 300mm Copper Patterned WaferEffect of Pre-Shot Peening on Plasma Nitriding Kinetics of Austenitic Stainless SteelFacile Method to Prepare Superhydrophobic High-Density Polyethylene CoatingInvestigation of Nano-ZnO on Properties of Coatings Based on Fluorinated Polyurethane EmulsionAnti-Icing Properties of Superhydrophobic poly (vinyl chloride) CoatingsMicrostructure and Corrosion Behavior of Laser Cladding Al3Ti-Based Composite Coatings on AA6063 Aluminum AlloyNano Surface Engineering and its ApplicationsPreparation and Properties of Cathodic Plasma Electrolysis Ni-P CoatingsPreparation of Biomedical Coating on Porous Titanium AlloyPreparation of Water-Based Anti-Graffiti Polyurethane CoatingResearch on Dynamic Erosion Wear Behavior of HVOF Sprayed Nanostructured WC-12Co CoatingStudy on Environment Friendly Insulated Coating for Non-Oriented Electrical Steel SheetSynthesis of Two Novolac Type Epoxy Resin Curing Agents and their ApplicationSystematic Theoretical Investigation for Adsorption Behavior of CO on β-SiC (001) SurfaceStudy on Anti-Thermal-Fatigue Property and Mechanism of 8407 Steel with Surface Aluminization and Oxidation TreatmentSynthesis of Ortho Phthaloyl Chloride Using Triphosgene by Response Surface MethodologyTopography and Wettability of Waterborne Polyurethane Coatings with Varying Amounts of Hard SegmentsMicrostructures of Surface Alloyed Carbon Steel Fabricated by Ferrous-Tungsten and Carbon PowdersStructure and Properties of TiBCN Coatings Synthesized Using Unbalanced Magnetron SputteringSurface Hydrophobic Modification of T-ZnOw with Silane Coupling AgentNovel Synthesis and Characterization of Titanium Carbide Coatings on Graphite FlakesChapter 18: Metallurgical Physical Chemistry and Ferrous Metallurgy TechnologyDissolution of Pyrite Particles by Chemical Oxidation and BioleachingDynamic Study on Lime CarbonationEffect of pH on PCP Remediation by Smectite Supported Pd / FeMicrostructure Refinement of Medium Carbon Steel through Ti DeoxidationInfluence on Concentration of Magnetite with Changing of Fe3+/Fe2+ in Copper SlagRemoval of Boron from Metallurgical Grade Silicon by Chloride Molten SaltSimulation of the Coupled Mass Transfer and Gas-Solid Reaction in Porous Packed BedsStudy on the Kinetic Models of the Combustion in Sintering ProcessStudy on the Behavior of SiO2 Related Phases in the Vanadium SlagStudy on Surface Dispersion and Topography of Ceria Supported on γ-AluminaRegularity of Nitrogen Macrosegregation in High Nitrogen SteelResearch of Flow Simulation with High-Pressure and Bottom-Blowing NitrogenCalculation Model of Mass Action Concentration for CaO-B2O3-SiO2 Slag SystemCognition on the Molten Blast Furnace Slag Granulation Techniques in Contemporary ChinaDesign on Closed Loop Soft Water Cooling System for Shougang Qiangang No.3 BFEffects of Impurity on Vanadium PrecipitatationEffects of SiO2 and Al2O3 Contents of Converter Slag on its Sticking to MgO-C BrickMelting Properties of Preparing Compound Desulphurizer by Aluminothermy Reducing Caustic Calcined DolomitePrediction of Oxygen Consumption of BF in Iron & Steel Factories Based on Least Squares Support Vector MachineResearch on Balling Properties of Pyrite Cinder with High Content of CopperStudy on Molten Steel Mutual Mixing Law of Intermixing Slab of Different Grades CastingXPS Analysis of Stainless Steel Plant DustThe Technical Analysis of Energy Saving and Emission Reducing in China’s Iron and Steel Industry Based on LEAP ModeThe Study of Nitrogen Solubility in High Nitrogen Steels Smelted with High Pressure and Bottom-Blowing NitrogenProduction of SG Grade Pig Iron in Mini Blast FurnaceStudy on Technology of Iron Removal during Recycling of Shell of Investment CastingFormation of Cr-Bearing Species in Stainless Steelmaking Dust by Induction FurnaceChapter 19: Non-Ferrous Metals Metallurgy and TechnologyAluminum Removal from Leach Liquor of Nitric Acid Pressure Leaching Laterite OresAtmospheric Acid Leaching of a Ferruginous Nickel LateriteCrystal Structure of bi(1,10-phenanthroline)- copper-Cl chlorine hydrate, [CuCl(C12H8N2)2]Cl0.5(H2O)5.5Effect of Out-Phase Electromagnetic Field on the HDC Casting Process of Commercial AluminumChapter 19: Non-Ferrous Metals Metallurgy and TechnologyExperimental Investigation of Indium Extraction by Sulfuric Acid Precure Pressure-Atmospheriation Leaching from Tin DustExtraction of Vanadium in the Comprehensive Recycling of Spent Al2O3-Based CatalystInvestigations on a Novel Process to Recycle Valuable Metals from Spent Al2O3-Based CatalystResearch on the Gold Ore Leaching in Iodine-Iodide SystemStudy on Effect of Complexing Agent Addition on Flotation Index of Copper-Nickel Sulfide OreReview of Arsenic Pollution and Treatment Progress in Nonferrous Metallurgy IndustryStudy on Continuous Leaching Process of Vanadium Bearing ClinkerStudy on Extraction of Vanadium from High Acid Leach Solution of Stone Coal Using Extractant HBL@101Study on Mineral Separation-Metallurgy Process of Ferro-Nickel Concentrate Prepared from Laterite OreStudy on the Influence of CaO on Reduction Smelting for the Laterite OreTerminal Optimization Control for Converter Steelmaking Based on the Auxiliary Resources Operating CharacteristicsChapter 20: Mineral Processing, Mining Engineering and TechnologyA Combined Beneficiation Process to Recover Iron Minerals from a Finely Disseminated Low-Grade Iron OreAnalysis of the Relative Position of the Slope and Underground Mining Area and its Influence PropertiesApplication of Crossing Borehole Hydraulic Fracturing in Coal MineApplication of Flotation Column on Flotation of Copper OreApplication of Wet Concrete Spraying Technology in Mine RoadwayComparison Tests between Magnetic Roasting in a Fluidized Bed and Magnetic Roasting in a Fixed BedCentrifugal High Gradient Magnetic Separation of Fine IlmeniteComprehensive Utilization Research Progress of a High Mg Phosphate Tailings in ChinaComparison of the Methods for Calculating Instant Depth of CutComprehensive Recovery of Carbon and Iron from Fly AshDifferent Slurry Concentration on Settling Effect of the Iron TailingsDifferential Flotation of a Pb-Zn-CaF2 Ore in Yunnan Province, ChinaEffect of Different Surfactant on Leaching of Uranium in Sandstone Type Ores with Low PermeabilityEnterprise Architecture Cybernetics for Global Mining Projects: Reducing the Structural Complexity of Global Mining Supply Networks via Virtual BrokerageExperiment Research on Copper Zinc Mixed FlotationEffect of Rod Arrangement in Matrix on High Gradient Magnetic Separation PerformanceGrate-Rotary Kiln Pellet Technology of Chromite Concentrate and Study on Mass Balance CalculationExperimental Study on Removal of Arsenic from Sulfuric-Acid Residue of High-ArsenicFlotation of a Copper-Lead Sulfide-Oxide Ore：Using a Combined Depressant for Galena and an Effective Activator D2 for Copper Oxide MineralsGeochemistrical Features of Laojunshan Granite and its Evolution in East-South Yunnan, ChinaGeochemical Characteristics and Ore Prediction of the Pb-Zn Polymetallic District in Kanmashan of Lancang County, YunnanImpact of Pre-Desliming on Flotation of Low-Grade Zinc Oxide Ore from LanpingGeological Characteristics of the Changdong-Manxu Pb-Zn Deposit in Ninger, Yunnan and its Ore-Search ProspectsMining Design Optimization Research on the Northern Section of 8 Coal Seam in West No.1 Mining Area in Pansan MineInvestigation on Beneficiation Strategy for CollophaneInvestigation on Molybdenite Separation from a Complex Sulfide OreInvestigation on Removing Acid-Consuming Gangue from a Copper Tailings by Reverse FlotationMechanism Research on Niobium Distribution Influenced by Roasting Temperature in the Direct Reduction Roasting ProcessMining Environment Governance and Sustainable Development of Coal IndustryNumerical Simulation of Strata Behavior in Super-Long and Large Mining Height Working FaceResearch on Classified Magnetic Separation of Oolitic Hematite from Guizhou ProvinceRecovering Limonite by High Intensity Magnetic Separation Technology from Honghe Limonite OreRecovery of Iron from Tailings of Yangla Copper Ore by Magnetic SeparationResearch on Process Mineralogy of some Pyrite CinderRecovery of Molybdenum from Molybdenum Ore with a High Content of Carbon by Separating Carbon from SulfurResearch and Industry Application of New Process of Low Copper Oxide OreProcess Mineralogy and Flotation Kinetic of a Copper Oxide Ore during Sulfuration FlotationResearch on Flotation Tests of Sulfide Copper Ore from YunanResearch on Log-Weibull Distribution and its Application in Statistical Distribution of Coal Cuttings Particle SizeRecovery of Fine Cassiterite from Tin Tailings Slime by Froth FlotationStudy of Lead Flotation Test in Oxide Lead-Zinc OreResearch on Scandium Recovery and Extraction ProcessSource of Tinny Granite in Gejiu Tin Ore Deposit in Yunnan Province, ChinaStudy on Technological Mineralogy of a Certain Lead-Zinc OreStudy on Failure Process Deterioration and its Amelioration of Mine Ventilation SystemStudy on Flotation Technology of Refractory Oxide Lead-Zinc Ore in HuizeSurface Analysis of Collophane by X-Ray Photoelectron SpectroscopySupercritical CO2 Fluid Leaching of Uranium from Sandstone Type OresThe Effect of Zinc Oxide Flotation Using DodecylamineZircon SHRIMP Geochronology and Geochemistry of late Jurassic Volcanic Rocks in Huiyin Obo Area, Inner Mongolia, ChinaThe Characteristics of Collapse Columns in Duanwang Minefield and their Influences on Gas Emission Quantities of Coal FacesTreatment of Pyrite Cinders for Arsenic Removal Using Acid Leaching ProcessUsing a New Bulk Flotation Process to Enhance the Recovery of Mineral Beneficiation in a Lead-Zinc Sulfide-Oxide Mixed OreThe Harmonious Design on the Beneficiability of the Pt-Pd Ores Containing High-MgO Gangues in YunnanThe Processing Method and Progress of Phosphate ResourcesNumerical Simulation of Mixed Emulsion Explosive Charging in Water-Filled-HoleChapter 21: Development Engineering of Oil, Gas Well and FieldAnalysis of Sealing Ability of Premium Tubing Connection under Axial Alternating Tension LoadAnalysis of Strength Safety of Perforated String Considering Detonation ParametersApplication Analysis and Stress Sensitivity Experiment for a Gas Reservoir in Daqing Oil FieldDevelopment of the Ring Block Drill Pipe Casing Wear Tester and Experimental ResearchEffect Evaluation of Foam System with Dripping Injection Foaming Agent in CO2 Flooding ReservoirInfluence of Geometrical and Physical Parameters of Cement on Loads of Casing and CementInfluence of Hardness on Casing Wear Resistance in Polysulfide Water Based Drilling FluidStrength Analysis of Transitional Segment of Buckling Tubing Nearby the Packer in Vertical WellStudy on Prediction Method of Oil and Gas Pipelines through Gob in Loess Gully RegionThe Field Test about CO2 in Low Permeability Oilfield of Daqing OutskirtThe Pressure Drop Calculation of Sea Water Pipe with No Heat Oil and Gas TransferringResearch on Gas Temperature Affect on Pharmacy Dust Explosion Pressure in Transport PipelineModification Design by Replacing Perforated Shells Barrel Based with 406 Steel Based on Finite Element AnalysisFailure Analysis of Pipe's Repaired Mouth and its Improvement Measures and SuggestionsSimulation Study on the Spiral Flow under Two Different Intake WaysChapter 22: Mine Survey, Safety and Prediction EngineeringAnalysis of Geological Factors Affecting Coal Seam Gas Content and PredictionAnalysis on Influence Factors of Top Corner Gas Concentration and Trend PredictionMine Gas Concentration Pre-Warning Based Monitoring Data Relational AnalysisApplication of AHP-FUZZY in Analyzing and Evaluating Occupational Hazards of Rolling EnterpriseModelling and Experimental Research of Spontaneous Combustion of CoalReliability Analysis of Ventilation System Based on Fuzzy Fault TreePreparation and Inhibition Characteristic of Multi-Phase Foamed Gel for Preventing Spontaneous Combustion of CoalSeepage Law of Gas-Containing Coal on Loading ConditionThe Pre-Controlling Technology of Spontaneous Combustion in Gutter-Up Gob for Fully Mechanized Top-Coal Caving FaceAnalysis and Related Preventive Measures of Explosion Risk Factors of LPG Rail TransportLandslide Stability Analysis Based on GeoStudioOverview of Bauxite Selective Dissociation in ChinaStudy on Fuzzy Comprehensive Evaluation System in Mine Safety Based on AHPFault Intelligent Diagnosis of Coal Mine Hoist Based on GCFNNLand Subsidence Prediction Method of Power Cables Pipe Jacking Based on the Peck TheoryChapter 23: Products Design, Intelligent Systems, Sensors, Control and ManufactureA Simulative Study on the Effects of Additional Inertia Force Exerting on the Water Dynamic Features of Damaged VesselsAnalysis of Mill Performance of Industrial Scale Ball Mill Using DEM SimulationBuilding of Fine-Tuning Mechanism Posture and Kinematics Model for Shield Segment ErectorCombination Model Based on CBR and SVM for BOF Oxygen Volume CalculationDesign and Implementation of Magnetic Bearings for Vertical-Axis Wind Turbine with Permanent Magnetic Synchronous GeneratorDeep Sliding Parameter Shutdown Research on 1000MW Supercritical UnitDesign and Research of Diesel Engine Governor Actuator Based on Finite Element AnalysisDesign of Elastic Cell in Pressure Sensor Based on ANSYSIllumination Design of the Computer ClassroomNumerical Simulation of the Inner Flow Field and the Optimal Design of Hema-Type ATY Nozzle Based on FluentPrecision Element Method for Free Vibration Analysis of Rotational Shells with Partial Viscoelastic CorePerformance Test and Flow Pattern Simulation of Small Diameter ThermosyphonsSimulation Study of a Novel Controllable Metamorphic Palletizing Robot MechanismStudy on Running Deviation and Adjusting Deviation of Belt Conveyor's Structure Based on Synchronous TechnologyStudy on Application Technology of Lightweight Model Oriented to No-Drawing ManufacturingStudy on the Standardized Design of Belt Conveyor Based on Synchronous TechnologySystem of Lifting and Lowering Base Plate Used in Deep-Water Exploration ShipThe Application of the Large Center Distance Planer Double-Enveloping Multithread Worm Pair on the Wide-Thick Plate Rolling MillTheoretic Analysis of the Effect of Carbon Dioxide Real Gas on the Performance of the T-Groove Dry Gas SealTransient Flow Analysis for Horizontal Axial Down-Wind TurbineParameter Analysis on Ultimate Load-Carrying Capacity of CFST Arch Rib with New-Type Dumbbell-Shaped SectionSimulation and Optimization of Absorption Column of the Dual-Pressure Nitric Acid Production ProcessNumerical Simulation Research of Equivalent Strain in Every Pass of H-Beam in Cogging Beam BlankStudy on Precision and Uniformity Evaluation Method of PEDOT/PSS Ink-Jet Print FilmDesign of a Three-Axis Digital Output Gyroscope-Based Intelligent Ultrasonic Diagnostic Navigation SystemRobust H∞ Control of Time-Delay SystemsA Novel Approach to Identify Red Palm Weevil on PalmsSimplified Calibration of Resistive Pressure Sensor Based on ZMD ChipStudy of Nitric Oxide Sensors Based on Nafion/Phosphotungstic Heteropolyacid/Polypyrrole Modified Glassy Carbon ElectrodesUnderstanding the High Sensitivity of Parallel WO3 Sensor Toward NO2 Gas at Low TemperatureThe Humidity and Temperature Control of Immersion Cycle Corrosion Test ChamberChapter 24: Engineering Education and Engineering ManagementActualizing Quality Engineering, Constructing Characteristic SpecialtyBusiness Intelligence as a Competitive Advantage on a Brazilian Chemical Industry in the Global Crisis of 2008, 2009 and 2010Constructing the Knowledge Base of Training Experts for Power Network Dispatching Operation ModeConstruction of Practice Environment to Cultivate High-Quality Technical TalentCost-Optimal Operation of Heat Exchanger Network Considering Pressure Drop ConstraintsPreliminary Study on Teaching Reform of Cosmetic Raw Material ScienceStructural Adjustment of Disciplines in Higher Learning Institutions from the Perspective of Dissipative Structure TheoryStudy on the Chemical Integrated and Designing Experiment Course of UndergraduateResearch on Environment Management Index System of Iron and Steel IndustryChapter 25: Computer Applications in Industry and EngineeringA New PMU-Based Fault Location Algorithm for Three-TerminalA Genetic Threading Method with Combined Structure- and Sequence-Based InformationA Method to Extend TOPSIS for Fuzzy Multiple Attribute Decision MakingA Random Particle Swarm Optimization Algorithm with ApplicationAn Improved MeanShift Insulator Image Segmentation AlgorithmApplication of OPENID Site Certification Technology in Management System of Perforation InformationExistence and Blow-Up Properties of Solutions for a Porous Medium EquationFault Diagnosis of Metallurgical Machinery Based on Spectral Kurtosis and GA-SVMFractional Differential-Based Approach for CT Image EnhancementMCGS Software of Industry Control and its Automation ApplicationOn Applications of Generalized Intelligent Control System Synthesis Method Based on Idea of System Generalized Performance IndexScaling of Engineering Image Based on Interpolation AlgorithmThe Applied Research of Decoupling Control Algorithm in Gas Mixing ProcessThe Preprocessing Method for Software Reliability Failure DataThe Information Key Technologies for Quality & Safety Monitor and Management of Agricultural ProductsThe Study and Application of Gaussian Process Surrogate Model Based on Gradient Particle Swarm Optimized Hyper-ParametersPetrophysical Facies Classification Based on Fuzzy Inference NetworksDevelopment of Health Monitor Instrument Based on LabVIEWStable Computer Control Algorithm of Von Neumann ModelDevelopment of Health Monitoring Instrument Based on LabVIEWEarth Fault Feeder Detection Based on Discriminant Analysis