Advanced Structural Materials, IUMRS-ICA 2010
Heftet /
2011
/ Engelsk
Produktdetaljer
ISBN
9783037851678
Publisert
2011-07-26
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1500 gr
Høyde
240 mm
Bredde
170 mm
Dybde
42 mm
Aldersnivå
J, 02
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
840
These 136 peer-reviewed papers cover the current understanding of researchers working in the fields of magnesium alloy use, structural composite materials, advanced materials processing technologies, high-temperature coatings, surface protection and aerospace materials. The result is an uniquely helpful guide to the subject.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Les mer
Selected, peer reviewed papers from the IUMRS-ICA 2010 11th IUMRS International Conference in Asia, September 25-28, 2010, Qingdao, China
- Preface and Sponsors
- Magnesium
- Research of Short-Flow-Route Processes for Magnesium Alloys Prepared by Crystalline Magnesium
- A Morphology Observation of β-Mg17Al12 Phase in AZ80 Magnesium Alloy Subjected to Hot Compression Deformation under Different Conditions
- Corrosion Behaviour of Mg-7.3Al Alloy in Buffered Chloride Solutions
- Corrosion Performance Study of Anodic Film Formed by Oxidizing Magnesium Alloy in Environmentally Friendly Electrolyte
- Corrosion Resistance of Modified Silane Films Formed on AZ31 Magnesium Alloys
- Direct Chill Casting of Φ500mm ZK60 Magnesium Alloy Billets under Low Frequency Electromagnetic Field
- Effect of Calcium and Strontium on Microstructure of AZ31 Wrought Magnesium Alloys
- Effect of Clock Rolling on Microstructures and Properties of AZ31 Magnesium Alloy Sheets
- Effect of Composite Energy-Field on Microstructure and Properties of AZ31B Magnesium Roll-Casting Alloy Sheet
- Effect of Cryogenic Treatment on the Microstructure and Mechanical Properties of AZ31 Magnesium Alloy
- Effect of Processing on Density of Mg-6Zn-0.5Y Alloy
- Effect of Heating Rates and Loading Rates on Mechanical Behaviors of Magnesium Alloy
- Effect of Initial Microstructure on Deformation Mechanisms of AZ31 Magnesium Alloy
- Effect of Melt Superheating Treatment on the Microstructure of as Cast AZ61 Magnesium Alloy
- Effect of 1% Ce Addition on Microstructures and Mechanical Properties of As-Cast Mg-3.8Zn-2.2Ca (wt.%) Magnesium Alloy
- Effect of Sr on Microstructure and Mechanical Properties of Mg-9Li-3Al Alloy
- Effect of the Rolling Process on Microstructures and Mechanical Properties of the Extruded LA91 Alloy Sheet
- Effect of Zn/Er Ratio on Microstructures and Mechanical Properties of the Cast Mg-Zn-Er Alloys
- Effects of Annealing Treatment on Texture and Stamping Properties of AZ31 Magnesium Alloy
- Effects of Gallium Addition on the Microstructure and Electrochemical Properties of Al-Zn-Bi Series Alloy Anode
- Effects of Microstructural Morphology on Mechanical Properties of Magnesium Alloys
- Effects of Sr Addition on Mechanical Properties and Microstructure of Mg-6Al Magnesium Alloy
- Effects of Sr Addition on as Cast Microstructure of AS31 Alloy
- Effects of Ultrasound on the Microstructures and Mechanical Properties of Cast-Rolling AZ31B Magnesium Alloy Strip
- Evaluation on Vibration Property of Magnesium Honeycomb Panels
- Flow Behavior and Microstructural Evolution of ZW61 Alloy during Hot Compressive Deformation
- Galvanic Corrosion Behavior and Three Protection Techniques of Magnesium Alloy Coupled to A6N01S-T5 Aluminum Alloy in NaCl Solution
- Grain Refinement of Magnesium Alloy AZ31 by Repeated Cold Rolling and Annealing
- High Cycle Fatigue Behavior of Gravity Cast AZ91D Magnesium Alloy
- High Strain Rate Compression Behavior and Constitutive Relation of As-Extruded Mg-Gd-Y Magnesium Alloy
- High Temperature Deformation Behaviour and Processing Maps of AZ81 Magnesium Alloy
- Influence of Additive on Structure and Corrosion Resistance of Manganese Phosphate Film on AZ91 Magnesium Alloy
- Influence of Cl- on Corrosion Behavior of AZ91 Magnesium Alloy in Simulating Acid Rain
- Influence of Silane on Corrosion Performance of Silane-Modified Acrylate Interpenetrating Polymer Network Coating on Magnesium Alloy AZ31
- Interpretation of Crystallographic Morphologies of Precipitates in Mg Alloys with a Secondary CCSL Model
- Laser Cladding of Ni-Based Alloy on Mg Alloy with Brass Transition
- Low Cycle Fatigue Behavior of As-Extruded AZ31 Magnesium Alloy
- Mechanical Behaviors of Magnesium Alloy AZ61 under Different Strain Rates and Heating Rates
- Mechanical Properties and Microstructure Evolution of AZ31 Magnesium Alloy Sheet Subjected to High Strain Rates Loading of Different Orientations
- Mechanical Properties and Microstructure of AZ31 Magnesium Alloy under Uni-Axial Tensile Loading
- Ultimate Strength and Plasticity of Magnesium Alloy under Different Temperatures and Strain Rates
- Microstructure and Corrosion Resistance of AM60 Magnesium Alloy Modified by Plasma Surface Treatment
- Microstructure and Mechanical Properties of MgMnAlZnCu High Entropy Alloy Cooling in Three Conditions
- Microstructure and Mechanical Properties of Quasicrystal Reinforced Magnesium Matrix Composites
- Microstructure and Solidification Behavior of Permanent-Mould-Cast Mg-9Li-3Al-XSr Magnesium Alloy
- Microstructures and Mechanical Properties of AJ62 Magnesium Alloy with Y and Nd Elements
- Microstructures and Mechanical Properties of As-Cast and Extruded Mg-2wt.%Zn Alloy Containing Dilute Content of Misch Metal
- Microstructures and Mechanical Properties of Heat-Resistant High-Pressure Die-Cast Mg-4Al-6RE-0.3Mn (RE= La, Ce, Pr, Nd, Wt.%) Alloys
- Observation of Microstructural Refinement in Mg-3Sn-2Ca Magnesium Alloy Containing Minor Sr
- Effect of Nd Addition on a Mg-Zn-Bi Magnesium Alloy
- Photocatalystic Cathodic Protection of TiO2 Coating on AZ31 Magnesium Alloy
- Preparation of Mg-Cu-Y and Mg-Ni-Gd Based Amorphous Brazing Material
- Research on Corrosion Resistance of AZ91D Magnesium Alloy Coated with Epoxy Resin
- Research on Heat Transfer during LFEC Processing by In Situ Temperature Measurement
- Researches on a Composite Extrusion Approach Based on FEM Method and Experiments
- Solute Distribution and Segregation during Solidification of Mg-6Al Alloys
- Structure and Magnetic Properties of MgFe2O4 Nanoparticles Prepared by the Low-Temperature Solid-State Reaction Method
- Study of Aluminum Coating Thermally Sprayed on AZ80 Magnesium Alloy Surface
- Study of the Microstructure of AZ31B Magnesium Alloy under High Strain Rate Deformation
- Study on the Corrosion Resistance of Magnesium Alloy AZ81 with Rare Earth
- Study to Yield and Uniformity of Mn in High-Mn Contained Mg-Mn Master Alloy Prepared by Stirring Cast
- Superplastic Forming Limit and Instability of AZ31B Sheet
- The Effects of Al-Ca Compounds on Grain Refinement of Mg-Ca Alloys
- The Evaporation Effect of Front Keyhole Wall in Penetration Welding with an Electron Beam
- Influence of Forward Extrusion on the Mechanical Properties and Microstructure of Homogenized AZ80 Magnesium Alloy
- The Tendency of Oxide Inclusion on Magnesium Alloys Intake Manifold in Tilt Cast
- Thermal Analysis during Solidification of Mg-4%.wtAl Alloy during Lost Foam Casting Process
- Thermodynamics of In Situ Formation of Mg2Si and MgO in AZ91D /Flyash Composites
- Wear Resistance Property of AM60 Magnesium Alloy Modified by Plasma Surface Treatment
- Structural Composite Materials
- Phase Equilibria in Co-Rich Co-Al-W Alloys at 1300°C and 900°C
- A Simplified Method of Synthesis and Purification of 4-Dimethylamino-N-Methyl -4-Stilbazolium Tosylate
- Effect of Hot Pressing Technology on the Microstructure and Mechanical Properties of ZrO2 Nano-Composite Ceramic Tool and Die Material
- Effects of Load and Sliding Distance on the Wear Properties of Hybrid Friction Materials
- Microstructural Model of Enveloping-Core Fiber Distribution of Conifer Wood and Research on Biomimetic Wood Composite
- Experimental Study on Mechanical Properties of X-Cor Sandwich
- Fabrication and Properties of Cf/SiC Composites Derived from Polysiloxane Precursor
- Fabrication of Alumina Composite Ceramics with High Addition of Carbon Nanotubes
- Model and Maximal Pull-Out Force of Helicoidal Fiber Structure in the Underpinnings of Tumblebug Cuticle
- Influence of Nano-SiO2 on the Strength of High Performance Concrete
- Preparation of CNTs/PANi Core/Shell-Structured Nanowires and Improvement of Sensitivity of Chemical Sensors
- Preparation of Ultrafine White Cement and its Hydration
- Study on Foaming Behavior of Microcellular PP/Inorganic Powder Composites
- Synthesis of (3-Mercaptopropyl)Trimethoxysilane-Modified ZMS and Study of the Enhancement of Ammonia-Nitrogen Removal from Water
- The Thickness and the Inerior Quality of Composite Panel in the Vacuum Assisted Resin Transfer Molding Process
- Well-Crystallized SnO2 Nanocrystals Homogeneously and Intimately Coated on Multiwalled Carbon Nanotubes by a Simple Surfactant-Free Hydrothermal Method
- Influence of Carbon Fiber Pre-Treatments on Interlaminar Shear Strength and Fracture Behavior of C/C Composites
- Advanced Processing Technologies of Materials
- Effect of the LaNd Addition on Melting Point and Spreading Properties of Bi5Sb8Sn Solder Alloy
- Numerical Simulation Analysis of Temperature Field on Silicon Carbide Synthesis Furnace
- Preparation and Properties of Electromagnetic Absorbing of Hollow Ceramic Microspheres
- Structure and Precipitation of Strip As-Cast and Hot-Rolled by TSCR on Oriented Silicon Steel
- Study of Roughness for Electroplating of Composite Texture on Material Surface
- Effect of the Content of LaNd on Physical Properties and Solderability of Zn20Sn6Cu Solder
- High Temperature Coatings and Surface Protection
- A Novel Wear Resistant Glass-Ceramic Coating Material
- A Study on Linseed Oil Modified Waterborne Polyurethane Coatings
- Corrosion Behavior of High-Strength Pipeline Steel and Coatings in the Simulated Sea Water Environment
- Effect of Laser Power on the Microstructure of Ni-P Layer Deposited on Aluminum Substrate
- Evaluation of Burnished Subsurface Mechanical Behavior Using Nanoindentation
- Fabrication of Ni-Based Composite Coating Reinforced with NbC Particles by Laser Cladding
- Failure of the EB-PVD TBCs of Rare Earth Zirconates
- High-Temperature Oxidation Resistance of Electroless Ni-P-ZrO2 Composite Coatings
- Inhibition Behavior of a Novel Acidification Inhibitor for Steels at High Temperature
- Investigation of Parameters’ Effect on Segmentation Cracks Formation in Zirconia Coating
- Microstructure and Oxidation Behavior of Molybdenum Disilicide Coating Prepared by Air Plasma Sprayed
- Microstructure and Properties of TiAlN Compound Films Fabricated on AZ91D Alloy by Magnetron Sputtering
- Microstructure Features of Cold-Sprayed NiCoCrAlTaY Coating and its High Temperature Oxidation Behavior
- Nitrite, Nickel-Free Electrophoretic Coating Phosphating Solution
- Properties of Oxide Film on the Surface of ZrHX(x=0~2)
- Properties of Sputtered NiCrAlY Used for Protective Gun Tube Coatings
- Research on Cavitation and Silt Erosion Resistance of HVAF Coatings
- Research on Properties of SiC Coating Inert Anode for Aluminum Electrolysis
- Si-B Co-Deposition Coatings on an Nb Silicide Based Ultrahigh Temperature Alloy Prepared by Pack Cementation Technique
- Improving the Bonding Strength of Y2O3 Coatings on Steel Substrates through a YOX Adhesion Layer
- Study of Y2O3/Er2O3 Multilayered Coatings Deposited by Magnetron Sputtering
- Study on Microstructure of Laser In Situ Formation of TiBX and TiC Titanium Composite Coatings
- Surface Modification by HVOF Coating of Micron-Sized WC-Metal Powder and Laser-Heating of the Coating
- Synthesis of (Ni, Co)Fe2O4-Spinel Coating Using High Temperature Oxidation Treatment of Ni-Co-Fe2O3Composite Electrodeposited Coating
- The Improvement in Oxidation Resistance of Magnesia-Carbon Refractory Bricks by Al4SiC4
- The Investigation of the Zirconium Silicate Coatings Prepared by APS
- Thermal Corrosion Behavior of NiCoCrAlY Coatings Prepared by Different Thermal Spraying Methods
- XRD and Morphologic Analysis of α-Cristobalite Produced from Silica Mine Waste under Lower Calcination Temperature
- Aero-Space Materials
- Effect of Annealing on Structural and Optical Properties of Zr Doped ZnO Film Grown by RF Magnetic Sputtering
- Tribological Properties of Laser Surface Texturing and Coating Duplex-Treated Surface
- Influence of Boron Nitride on Tribological Behavior of Nickel-Base Composite Coatings at High Temperature
- Improvement of the Electrochemical Properties of LiMn2O4 by Doping Rare Earth Element Ce
- Reconditioning of Electroless Nickel Plating Bath on Magnesium Alloys
- Mechanical Properties and Strengthening Mechanisms of In Situ (TiB+TiC)/Ti-1100 Composite at Elevated Temperature
- Enhanced Saturation Magnetization of Nanocrystalline Cobalt Produced by Surface Mechanical Attrition Treatment
- Microstructure and Magnetic Properties of Hot-Pressed and Hot-Deformed Composite Magnets Produced by Spark Plasma Sintering Method
- The Interface Investigation and Tribological Mechanism of TiB2-TiC-Ni/TiAl/Ti Functionally Gradient Materials Prepared by FAPAS Process
- Encapsulating and Manufacture Technology Study of Impact-Resisting, Enclosed Soft Aramid Vesicle
- Preparation and Characterization of Carbon Fibre Reinforced Aluminium Matrix Composite
- A New Sand Casting Process with Accelerated Solidification Rate
- Effect of Structure on the Mechanical Properties of PAN-Based Carbon Fibers during Graphitization
- Preparation of Polyacrylonitrile High Modulus Carbon Fibers by Catalytic Graphitization Using Boron
- Characterizations of UV Aging and Atmospheric Corrosion on Epoxy Coated 7A04 Aluminum Alloy
- Research and Classification of Inflatable Space Vehicle and its Materials
Les mer
Produktdetaljer
ISBN
9783037851678
Publisert
2011-07-26
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1500 gr
Høyde
240 mm
Bredde
170 mm
Dybde
42 mm
Aldersnivå
J, 02
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
840