ICAMST 2013

Selected, peer reviewed papers from the 2013 International Conference on Advanced Materials Science and Technology (ICAMST 2013), September 17-18, 2013, Yogyakarta, Indonesia

• Preface and Conference Organizers
• Chapter 1: Nanofibers and Membranes
• The Role and Prospect of Nanomaterials in Polymeric Membrane for Water and Wastewater Treatment: A State-of-the-Art Overview
• Synthesis of Low Fouling Porous Polymeric Membranes
• Mass Production of Stacked Styrofoam Nanofibers Using a Multinozzle and Drum Collector Electrospinning System
• Transparent and Conductive Fluorinated-Tin Oxide Prepared by Atmospheric Deposition Technique
• Gas Sensing Using Static and Dynamic Modes Piezoresistive Microcantilever
• One-Step Fabrication of Short Nanofibers by Electrospinning: Effect of Needle Size on Nanofiber Length
• Carbon Dioxide Permeation Characteristics in Asymmetric Polysulfone Hollow Fiber Membrane: Effect of Constant Heating and Progressive Heating
• Electrospinning of Poly(vinyl alcohol)/Chitosan via Multi-Nozzle Spinneret and Drum Collector
• A Simple Way of Producing Nano Anatase TiO₂ in Polyvinyl Alcohol Fibers
• The Crystal Structure, Conductivity Character and Ionic Migration of Samarium Doped-Ceria (SDC) and its Composite with Sodium Carbonate
• Preparation of Sulfonate Grafted Silica/Chitosan-Based Proton Exchange Membrane
• Synthesis and Characterization of Solid Polymer Electrolyte from N-Succinyl Chitosan and Lithium Perchlorate
• Epoxidised Natural Rubber Based Polymer Electrolyte Systems for Electrochemical Device Applications
• Eggs Shell Membrane as Natural Separator for Supercapacitor Applications
• Titania Coated Ceramic Membrane from Clay and Muntilan Sand for Wastewater Filter Application
• Utilization of Fly Ash as Ceramic Support Mixture for the Synthesis of Zeolite Pervaporation Membrane
• Synthesis and Characterization of Nanostructured Tungsten Oxide by Hard Template Method
• Chapter 2: Nanoparticles and Powders
• Excited-State Proton Transfer in Fluorescent Photoactive Yellow Protein Containing 7-Hydroxycoumarin
• Effect of Heating Time on Atrazine-Based MIP Materials Synthesized via the Cooling-Heating Method
• Preparation of Orange Peel Based Activated Carbons as Cathodes in Lithium Ion Capacitors
• Synthesis of Fe₂O₃/C Nanocomposite Using Microwave Assisted Calcination Method
• Magnetic CuFe₂O₄ Nanoparticles for Adsorpstion of Cr(VI) from Aqueous Solution
• Optical Properties of Zn-Doped CeO₂ Nanoparticles as a Function of Zn Content
• Chelating Agent Role in Synthesizing Cerate-Zirconate Powder by a Sol-Gel Method
• Influence of Ionic Surfactants under Ultrasonic Irradiation to Reduce the Particle Size of Mechanically Alloyed La_1-XSr_X Fe_0.5Mn_0.25Ti_0.25O₃ Powders
• Covalent Functionalization of Amino Group onto Carbon-Based Magnetic Nanoparticles Using Pulsed-Powder Explosion Technique
• Magnetic Properties and Microstructures of Polyethylene Glycol (PEG)-Coated Cobalt Ferrite (CoFe₂O₄) Nanoparticles Synthesized by Coprecipitation Method
• Copper-Zinc-Titania Nanocomposite as Catalyst for CO₂ Photo-Reduction: A Surface Deactivation Study
• The Highly Active Photocatalyst of Silver Orthophosphate under Visible Light Irradiation for Phenol Oxidation
• Treatment of Coal Stockpile Wastewater by Electrocoagulationusing Aluminum Electrodes
• Preparation of Activated Carbons from Coconuts Shell for Pb (II) Adsorption
• Preparation of Sulfated Zirconia Using Modified Sol Gel Method
• Enrichment of Indonesian Low Rank Coal's Surface Oxygen Compounds (SOCs) Using Hydrogen Peroxide and its Adsorptive Properties
• Characteristics of Water-ZrO₂ Nanofluids with Different pH Utilizing Local ZrO₂ Nanoparticle Prepared by Precipitation Method
• Corrosion of Carbon Steel in Nanofluid Containing ZrO₂ Nanoparticle at Different Temperature
• Chapter 3: Thick and Thin Films
• Contact Formation at Interface of LSCO|BCZY|LSCO Symmetrical Cell: Effect of LSCO to PVP Ratio
• Preparation of Activated Carbon Monolith Electrodes from Sugarcane Bagasse by Physical and Physical-Chemical Activation Process for Supercapacitor Application
• The Effect of Paste Preparation and Annealing Temperature of ZnO Photoelectrode to Dye-Sensitized Solar Cells (DSSC) Performance
• Utilization of Natural Porphyrin Thin Films as a Photosensitizer for Photodetectors
• Effect of Growth Temperature on Cobalt-Doped TiO₂ Thin Films Deposited on Si (100) Substrate by MOCVD Technique
• Fabrication of Aluminum Doped Silica Preform Using MCVD and Solution Doping Technique: Soot Analyses and Solution Concentration Effect
• The Influence of Mn/Ga Solution Mole Fraction on the Solid Composition and Microstructure of GaN:Mn Thin Film Deposited on Silicon Substrate by Spin Coating Technique
• Grain Size Analysis on Ba_0.65Sr_0.35TiO₃ Thin Films Using Design of Experiment
• Fabrication and Characterization of Stacked Self-Assembled In_0.5Ga_0.5As/GaAs Quantum Dots Grown by MOCVD
• Er₂O₃-Al₂O₃ Doped Silica Preform Prepared by MCVD-Chelate Vapor Phase Delivery Technique
• The Effect of Variation Concentration Nd³⁺ Ions on Physical and Optical Properties of TZBN Glass
• Effects of Iron Dopants on Barium Strotium Titanate (Ba_0.8Sr_0.2TiO₃) Thin Films
• Wettability Study Using O₂ and Ar RIE Gas Treatment on Aluminium Surface
• Room-Temperature Deposition of ZnO Thin Films by Using DC Magnetron Sputtering
• Defects Induced by Reactive Ion Etching in Ge Substrate
• Effect of Electrolyte Composition on Corrosion Resistance in Nickel Plating Process for Coating Bonded Magnet PrFeB
• Effects of Sputtering Coating Factors on Elastic Modulus of MoN Coatings
• Effect of Anodizing in Surface Finishing on Speed Boat Impeller Made of Aluminum
• Chapter 4: Biomaterials
• Biomimetic Creation of Surfaces on Porous Titanium for Biomedical Applications
• Production and Characterization of Biodegradable Plastics Based on Starch of Artocarpus heterophyllus Lam Seeds
• Characteristics of Mg-Ca-Zn Alloy Metallic Foam Based on Mg-Zn-CaH₂ System
• The Effect of Repeated Impingement on UHMWPE Material in Artificial Hip Joint during Salat Activities
• Simple and Easy Method to Synthesize Chicken Eggshell Based Hydroxyapatite
• Synthesis of Chitosan-Gold Nanoparticles for Drug Delivery
• Synthesis of Hydroxyapatite Nanoparticle from Tutut (Bellamya javanica) Shells by Using Precipitation Method for Artificial Bone Engineering
• Adsorption of Lead Ions onto Citric Acid Modified Rubber (Hevea brasiliansis) Leaves
• Effect of Deacetylation on Characterization of pH Stimulus Responsive Chitosan-Acrylamide Hydrogels Using Radiation
• Synthesis of Smart Biodegradable Hydrogels Cellulose-Acrylamide Using Radiation as Controlled Release Fertilizers
• Structural Studies of 1,3:2,4-Dibenzylidene Sorbitol Gels
• Effects of Surface Treatments on Nata de Cassava on the Tensile Strength and Morphology of Bacterial Cellulose Sheet
• Impact and Thermal Properties of Unsaturated Polyester (UPR) Composites Filled with Empty Fruit Bunch Palm Oil (EFBPO) and Cellulose
• Biodegradation of Low Density Polyethylene (LDPE) Composite Filled with Cellulose and Cellulose Acetate
• The Treated Rice Straw as Potentially Feedstock of Wood and Rice Straw Fiber Blend for Pulp and Paper Making Industry
• Experimental Studies of Thermo-Induced Mechanical Effects in the Main-Chain Liquid Crystal Elastomers
• Characterization of Photo Biocomposites for Application in Biomedical Materials
• Study on Ginger Extract Performance as Corrosion Inhibitor in Acid and Neutral Environments
• Comparison between Slip Casting and Cold Isostatic Pressing for the Fabrication of Nanostructured Zirconia
• Chapter 5: Electronic Materials
• Fabrication of Silver Nanoparticles and its Films and their Characterization of Structure and Electrical Conductivity
• Crystallographic and Electrical Properties of Barium Zirconium Titanate Doped by Indium and Lanthanum
• Ohmic Contact in P-HEMT Wafer Using Metallization with Ge/Au/Ni/Au
• Possible Existence of the Stripe Correlations in Electron-Doped Superconducting Cuprates Eu_1.85Ce_0.15Cu_1-yNi_yO_4+α-δ Studied by Muon-Spin-Relaxation
• Fabrication and Characterization of Ferroelectric Thin Film Ba_xSr_1-xTiO₃ for Application in Light Intensity Detector
• A Theoretical Study on Electron Tunneling Current in Isotropic High-κ Dielectric Stack-Based MOS Capacitors with Charge Trapping
• Modeling of Drain Current in Armchair Graphene Nanoribbon Field Effect Transistor Using Transfer Matrix Method
• A Theoretical Model of Band-to-Band Tunneling Current in an Armchair Graphene Nanoribbon Tunnel Field-Effect Transistor
• Determination of Thin Film Ba_0.5Sr_0.5TiO₃ Ferroelectric Effective Mass from I-V Characteristics Calculation Using Transfer Matrix Method
• Chapter 6: Magnetic Materials
• Thermal Analysis and Magnetic Properties of Lanthanum Barium Manganite Perovskite
• Magnetoelectric Coupling Phenomena Based on the Changes of Magnetic Properties in Multiferroic Nanocomposite BaTiO₃-BaFe₁₂O₁₉
• Microstructural Studies of (Ba_0.7Sr_0.3Fe₁₂O₁₉)_1-x - (Ba_0.7Sr_0.3TiO₃)_x with x = 0.2, x = 0.5 and x = 0.8 Composite System by Mechanical Alloying Process
• Modeling of Magnetorheological Damper Using Back Propagation Neural Network
• Microstructural and Magnetic Properties of Ti²⁺-Mn⁴⁺ Substituted Barium Hexaferrite
• The Influence of Ni-Doping on Structure and Magnetic Properties of La_0.67Ba_0.33MnO₃
• Micromagnetic Study on the Dynamic Susceptibility Spectra of Square-Patterned Ferromagnets
• Micromagnetic Simulation on Ground State Domain Structures of Barium Hexaferrite (BaFe₁₂O₁₉)
• Magnetic Properties and Reflection Loss Characteristic of Mn-Ti Substituted Barium-Strontium Hexaferrite
• Analysis of Structural and Microstructure of Lanthanum Ferrite by Modifying Iron Sand for Microwave Absorber Material Application
• Characterization of Single Phase of La_0.8Ba_0.2Fe_0.3Mn_0.35Ti_0.35O₃ Nanoparticles as Microwave Absorbers
• Magnetic Properties of Coring Samples from Aceh Basin West Off Sumatera Island
• Microwave Properties of Composite Ba_0.5Sr_0.5Fe_11.7Mn_0.15Ti_0.15O₁₉/La_0.7Ba_0.3MnO₃ Material
• Experiment Using a Magnetically Controlled Ferrofluid Flow in a Flatplate Laminar Flow System
• Chapter 7: Optical Materials
• Anode Buffer for Organic Devices Composed of Gold Nanoparticles Prepared by Ark Plasma Deposition
• A Simple Optimization of Triple-Junction Solar Cell nc-Si:H/a-Si:H/a-SiGe:H Using Computer Modeling and Robust Design
• Detailed Analysis of Shallow and Heavily-Doped Emitters for Al-BSF Bifacial Solar Cells
• Microwave-Assisted Solid State Synthesis of Red-Emitting BCNO Phosphor and its Characteristics
• Synthesized 2,4,5-Triphenylimidazole as Precursor of Organic Light Emitting Diode (OLED) Material
• Prelimenary Study on the Photovoltaic and Impedance Characteristics of Dye Sensitized Solar Cell (DSSC) using Polymer Gel Electrolyte
• Charge Carrier Dynamics of Active Material Solar Cell P3HT:ZnO Nanoparticles Studied by Muon Spin Relaxation (μSR)
• Influence of Mass Ratio of Aquadest and TTIP on the Synthesis of TiO₂ Nanoparticles to Improve the Performance of DSSC with Beta-Carotene as Sensitizer
• Sol-Gel Derived ZnO Nanorod Templated TiO₂ Nanotube Synthesis for Natural Dye Sensitized Solar Cell
• Organic-Inorganic Solar Cell Based on Sprayed MEH-PPV/ZnO Nanorods Layers
• Dimensional Analysis of Grid Pattern on a Nematic Liquid Crystal
• Structural, Chemical Composition and Optical Properties of CdTe Fabricated by Vacuum Evaporation Technique
• The Formulation of Phonon as the Result of Second Quantization of Crystalline Lattice Vibration Using Wave Functional Method
• Synthesis of Tungsten Oxide (WO₃) Film on Glass Substrate Using Aqueous Based Solution Spray Deposition Method
• Effect of Oxygen Plasma on the Optical Properties of Monolayer Graphene
• Chapter 8: Composites, Ceramics, and Alloys
• The Influence of Sandblasting and Electropolishing on the Surface Hardness of AISI 316L Stainless Steel
• Ground Shear Strain and Rate of Erosion in the Coastal Area of North Bengkulu, Indonesia
• Preparation and Characterization of Magnetite-Silica Nano-Composite as Adsorbents for Removal of Methylene Blue Dyes from Environmental Water Samples
• Development of Hydrocracking Catalyst Support from Kaolin of Indonesian Origin
• Adsorption Mechanism of Carbon Monoxide on PtRu and PtRuMo Surfaces in the Density Functional Theory Perspective
• ZnO-SiO₂/Laponite Photocatalyst: Kinetic Study on Photocatalytic Decolorization of Methylene Blue
• Hydrothermal Synthesis and Visible-Light-Driven Photocatalytic Activity of Allophane – Wakefieldite-(Ce) Composite
• Study of Internal Response of Epoxy due to Compressive Load via Experiment and Simulation Using Abaqus FEA Software
• Development of Geopolymer Utilizing Inorganic Waste Materials
• High Compressive Strength of Palm Oil Empty Fruit Bunches (Elaeis guineensis) Composites
• Improving the Physico-Mechanical Properties of Eco-Friendly Composite Made from Bamboo
• Properties of the Treated Kenaf/Polypropylene (PP) Composites
• Improving Mechanical Properties of Ceramic Composites by Harmonic Microstructure Control
• Application of Carbon Fiber-Based Composite for Electric Vehicle
• Coating Steel with Nanosilica by Pulsed Direct Current Electrophoresis for Corrosion Protection
• In Situ Al/Al₂O₃ Composite Coating on Steel Substrate Prepared by Mechanical Alloying at High Temperature
• Nano-Micro Characterization of NiCoCrAl Coating on Carbon Steel Substrate
• Influence of Sintering Temperature on the Translucency of Sintered Zirconia by Cold Isostatic Pressing
• The Phenomenon of Pitting Corrosion Attack on the Milled Aluminium Alloy Al 2618 Plate during Surface Preparation through Sulphuric Acid Anodising
• Study of Laser Cladding of Stellite 6 on Nickel Superalloy Substrate with Two Different Energy Inputs
• Interdiffusion of Elements in Aluminum 2024 Clad during Reheat Treatment Process at 495°C
• Boron Carbide B₂₅C and B₈C₁₈ Synthesized Using Boric Acid-Glucose and Boric Acid-Active Carbon at Low Temperature without Coreductor Materials
• Influence of Oxygen on Microstructures of Ti-Mo-Cr Alloy
• Effect of Copper Addition on the High Temperature Oxidation of Zirconium Alloy ZrNbMoGe for Advanced Reactor Fuel Cladding Material
• Fractographic Analysis of 5052 Al-Mg Alloys Processed by Equal Channel Angular Pressing
• Fatigue and Mechanical Properties of Aluminium-Copper Bi-Metal Tubes
• Chapter 9: Measurement and Characterization Techniques
• Determination of Band Gap Energy of Semiconductor in Homojunction Structure Devices by Using Customized Microcontroller Based Apparatus
• Macrotexture Study of Non- and Sintered Pure Nb and Nb₃Sn Using Orientation Distribution Function
• Modeling of Repeated Rolling Contact on Rough Surface: Surface Topographical Change
• Neutron Diffraction Measurements on Dissimilar Metal Weld of Cu-Al Obtained by Friction Stir Welding Method
• Testing of Materials for Heat and Moisture Transport
• Simultaneous Calibration for MEMS Gyroscopes of the Rocket IMU
• Quantitative Bump Height Analysis in ENIG Using Design of Experiment
• Automation of Four Circle Diffractomete /Texture Diffractometer for Studies of Crystal Structure and Texture Measurements
• Celluloide Film Based Infrared Bandpass Filter for Thermography
• Comparison between Automatic and Semiautomatic Thresholding Method for Mammographic Density Classification
• Image Processing for Multiple Micro-Radiography Images
• 3D Micro-Radiography Imaging for Quick Assessment on Small Specimen
• Effect of EDTA and PYP as Co-Ligand of Radiolabeled Nanomaterial M41S-NH₂ for Radiosynovectomy
• Weld Defect Classification in Radiographic Film Using Statistical Texture and Support Vector Machine
• Investigation of Moisture in Coal Using Electrical Capacitance Volume Tomography
• Design and Fabrication of Wear Testing Machine for a Fishing Net-Weaving Machine Component
• High Performance Current-Voltage Characterization System for High Resistance Materials
• Online Monitoring of Copper Leaching Process Heterogeneity Using Electrical Capacitance Volume Tomography
• High Sensitivity Fluxgate Sensor for Detection of AC Magnetic Field: Equipment for Characterization of Magnetic Material in Subsurface
• Flaw Detection in Welded Metal Using Magnetic Induction Tomography
• A New Type of Planar Chamber for High Frequency Ozone Generator System