Produktdetaljer
ISBN
9783037850619
Publisert
2011-04-25
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1400 gr
Høyde
240 mm
Bredde
170 mm
Dybde
34 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
680
Redaktør
Volume is indexed by Thomson Reuters CPCI-S (WoS).
These proceedings comprise the refereed papers presented at the International Conference on Advanced Material Research (ICAMR 2011) held on January 21 - 23, 2011 in Chongqing, China. The main goal of this, and other events, was to provide an international scientific forum for the exchange of new ideas in a number of fields via in-depth discussions with peers from around the world. Both inward research; core areas of advanced materials research and outward research; multi-disciplinary, inter-disciplinary research and applications were covered; thus providing a thorough overview of the subject.
Les mer
Selected, peer reviewed papers from the 2011 International Conference on Advanced Material Research (ICAMR 2011), January 21 - 23, 2011, Chongqing, China
- Preface and Organizing Committee
- Photocatalytic Degradation of C.I. Reactive Red 2 on the Mixture of TiO2 and HZSM-5 Zeolite
- Microstructure and Mechanical Properties of Lost Foam Casting AZ91D Alloy Produced with Mechanical Vibration
- Research of Process Planning Based on Similarity Theory under Reconfigurable Manufacturing System
- Photoelectrocatalytic Degradation of Methyl Orange on Porous TiO2 Film Electrode in NaCl Solution
- Photocatalytic Activity of TiO2-HZSM-5 Composite for C.I. Reactive Red 2 Degradation
- Manufacturing of Biocompatible Implant Component Using Rapid Prototyping Technology
- Study on the Effect of Waste Gypsum on Hardening Paste Structure and Performances of Lime-Fly Ash
- Performance Assessment of Photocatalyst for Ethanol Removal
- Performance Study of SMPS and FDMA for Nanometer Aerosol Particle Measurements
- Kinematic Analysis and Simulation of the Translational Parallel Mechanism
- A Study of Mixed Media Creative Artwork Designed with Computer Software
- A Design Research of Plastic Cup Modeling Using Simulation with 3ds Max
- Optimization of High Performance Engineering Plastics in Thin Wall Part Injection Molding
- Photocatalytic Degradation of Methyl Orange on the Composite of TiO2 and Lanthanum Niobate
- Analysis for Diving Regulator of Manufacturing Process
- Study on the Reuse of Production Wastewater with Submerged Ultrafiltration Membrane
- Esterification of Polypropylene Fiber and its Adsorption of Phthalate Esters
- The Refined Analysis about Mechanical Behavior for Torsional Circular Shaft of Cubic Quasicrystal
- Numerical Simulation on Bending Characteristics of Aluminium Foam Filled Thin-Walled Tubes
- Demonstration of Modification from AlF3 Re-Deposition to Polymer Re-Deposition on Air Bearing Surface (ABS) Etched Sidewall of Fluorine-Based Plasma Etch on Al2O3-TiC Substrate
- Fabrication and Gas-Sensing Characterization of Molybdenum Oxide Nanostructure by Reactive RF Sputtering
- Improvement of Hydrophilic Properties on Electrospun Polyacrylonitrile Fabrics Surface by Plasma Treatment
- High Speed Rail: Review on the Regional Impact and Economy Development
- Modeling and Analysis of Effect of Thermal Exposure on Fatigue Crack Growth of Al-Cu-Mg Alloys with Low Cu/Mg Ratio
- Development of Processing Maps for DC Cast Modified and Unmodified Hypereutectic Al-Si Alloys
- Resistance Measurements in Conductive Fabrics
- Pathway and Kinetic of Dechlorination of Trichloroethylene in Water by Supported Nanoscale Bimetallic Fe-Cu Particles
- State-of-Art Technology ALLVAC 718 Plus Superalloy for Gas Turbine Engine Parts
- The Influence of Preheating on Automated Fiber Placement Speed
- Effect of Annealing Temperature on Deformed Microstructure of Low Carbon Martensite
- The Direct Oxidation of CO on the Highly Active Pt-Skin Pt3Ni(111) Surface: a First Principles Study
- Characteristics of Visible-Light Enabled TiO2/ITO Films
- EDS, XRD and Raman Scattering Study of Dy Ion Implanted CdTe Polycrystalline Thin Films
- Base Pressure Effects on the Structure, Surface Roughness and Electrical Resistivity of Mo Thin Films by RF Magnetron Sputtering
- The Adsorption Properties of Cu and Ni on the Ceria(111) Surface
- A Study of Mixed Media Art Creation for Children’s Picture Books
- A Study of Creative Artworks of Picture Books with Tableware Colored Using Mixed Media
- Applied Design and Research of RFID for Sports Competitions
- Numerical Simulation on Mechanical Properties of SiC/Al Co-Continuous Composites
- A Study of Logo Design for Products Marketed Online Using Computer Graphing Software
- Water Distribution System Modeling and Simulation
- Effects of Asperity Shape on the Adhesion Hysteresis Originated from Surface Roughness
- The General Solution for Torsional Circular Shaft of Cubic Quasicrystal
- An Integrated Multimedia Learning System for Reciprocating Internal Combustion Engines: RICEM
- Project of High-Speed Railway and Sustainable Development Evaluating
- Shell Body Nose Forming by Rotary Swaging Process
- Integrated Scheduling Algorithm with Setup Time
- The Multi-Objective Optimization Design of Leaf Spring of few Piece Variable Cross-Section
- An Improved Routing Algorithm in Intermittently Connected Sensor Networks
- A Stress and Strain Analytical Formula Applied in Low Alloy and High Strengthen Steel Material
- Effect of Sm2O3 on the Electrical Properties of TiO2-Ta2O5-Based Capacitor-Varistor Ceramics
- Dry Sliding Tribological Behavior of Continuous Ceramic Frames Reinforced Aluminum-Based Composites
- Epipolar Geometry Estimation Using Improved LO-RANSAC
- Air Flow in Large Space Building with CFD Model and Local Test
- Structure and Compressive Properties of Silver Foams with Various Porosities
- Influence of Substrate Material on Tensile Behavior and Fracture Characteristics of SiC by Chemical Vapour Deposition
- The Exact Deformation Theory of Two-Dimensional Dodecagonal Quasicrystal Shaft
- Effect of L/D Ratio on Al-Si Functionally Graded Material Cast through Centrifuge Technique
- Two Ash Stability Coal Stone Basic Levels Are in the Express Line of PingDingShan City of Application and the Technique Economy Analysis
- Automatic Ultrasonic Inspection Method of Railway Axle and its Remaining Life Prediction
- Defect Inspection and Classification of CFRP with Complex Surface by Ultrasonic
- Discussion about Calculation Principle of Carbon Emission in Low-Carbon Architectures
- Biomechanical Numerical Simulation of Bone Tissue Engineering Scaffolds
- The Influence of Air Humidity on Fatigue Properties of an AA2524－T34 Aluminum Alloy
- Implementation of W-CDMA System Based on IP Functions
- Characteristics of Rotary Draw-Bent Tubes for the Hydroforming
- Preparation and Modification MnZn Ferrite Thin Films under Swift Heavy Ion (SHI) Irradiation
- Study on the Effect of Fe3O4 Nanoparticle Dopants on the Properties of Magneto Optical Glasses
- Trim Optimizations of an Adaptive Tailless Aircraft with Composite Wing
- Numerical Simulation of Residual Stress Distribution Produced by Shot Peening
- Convolution PHD Filtering for Nonlinear Non-Gaussian Models
- Marginal Design Evaluation for CAM Obtained Zirconia Based Crown Frameworks
- Ethylene Polymerization by Thioether Bridged Dinuclear Titanocene Complex
- Parametric Simulation Modeling Approach for Mobilization Production Plan
- Resolution and Analysis for Quasi-Stable Frost Forming Model
- Modeling and Decoupling Control of Grid-Connected Voltage Source Inverter for Wind Energy Applications
- Ethylene Polymerization by Thioether Bridged Dinuclear Zirconocene Complex
- Unequal Deformation Characteristics of In-Plane Roll-Bending of Strip with Considering Spread Effects
- A Multi-Objective Optimization Method for Thin-Walled Tube NC Bending
- GetCM: A Vision of Cloud Manufacturing
- A New Numerical Method for the Riesz Space Fractional Diffusion Equation
- The Investigation of Conformational Change and Water Permeability of Poly(acrylic Acid)-Graft-Polypropylene Membrane in Cross-Flow Microfiltration
- Optimization of Machining Parameters on Surface Roughness in EDM of Ti-6Al-4V Using Response Surface Method
- Study on Mechanical Properties of New Type Chain Concrete Blocks with Ecological Function
- Influence of Electromagnetic Stirring Parameters and Isothermal Extruding on Semi-Solid Forming Performance of ZA27 Alloys
- Linear Static Response of Suspension Arm Based on Artificial Neural Network Technique
- Production of Activated Carbon from Ligin: Optimization Using Response Surface Methodology
- Biosorption of C. I. Reactive Red 2 by Immobilized Fungal Biomass
- The Effect of Heat Treatment Temperature on Property and Structure of Ni Group Core-Shell Particles ER
- Application of Imprinted Functionalized Silica Gel Sorbent for Selective Removal of Cadmium (II) from Industial Wastewaters
- Analysis of Influence Factors on Anti-Rutting Performance of Fiber Asphalt Mastic and Fiber Asphalt Mixture
- Manufacturing Process Planning to Evaluation on Failure Causes for Lithography Machine: Analytic Hierarchy Process
- Using Data Envelopment Analysis to Measurement Patent Performance of Medical Instruments Industry
- Preparation of Steel Slag Adsorbent and its Removal Phenol Property
- Determinition of Optimal Coiling Temperature and Cold Reduction Ratio of Adding P High Strength if Steel
- Morphology of High-Pressure Crystallized Poly (Ethylene Terephthalate)/Bisphenol-A Polycarbonate Blends
- GC/MS Analysis on Benzene/Alcohol Extractives of Manglietia Glauca Leavies for Biomedicine Engineering
- The Mechanical Feature and Dependence of the pH-Sensitive Hydrogel
- First Principles Calculation of Geometrical and Electronic Structure of Semiconductor Fe1-xMnxSi2
- Friction Effect in Hot Rolling of Large Rings with Different Sizes
- The Creep Behaviour of Extruded Mg-5Li-3Al-1.5Zn-2RE Alloy
- Effect of Heat Treatments on the Bio-Corrosion Resistance of Magnesium Alloy Mg-8.0Al-1.0Zn-xGd
- Kinetic Analysis of Thermal Decomposition of Epoxy Resin/Polyaniline Nanocomposites
- Isomerization of α-Pinene Catalyzed by Polyaniline with Different Morphologies
- The Determination of Prestress for Reinforced Concrete Pipes Based on Elasticity
- Effect of Different Silicon Sources on CO2 Absorption Properties of Li4SiO4 at High Temperature
- Simulation of Temperature Field in Selective Laser Sintering on PA6/Cu Composite Powders
- Microstructure and Wear Resistance of Cu-TiC Composites Fabricated by Mechanical Alloying and Spark Plasma Sintering
- Study of Strain and Temperature Simultaneous Measurement Technology Based on Sampled Grating
- The Synthesis and Characteristic Properties of Poly (AAc-Co-AAm)
- Improvement of a Novel MEMS Bionic Vector Hydrophone
- Effects of Plasma Nitriding on Low Temperature Salt-Bath Chromizing of W18Cr4V Steel
- Experimental Study on RC Beams Strengthened with CFRP Sheets
- A Effects of Polyaniline Morphologies on Performance for Removal Rhodamine B
- Method and Application of Multistage Machining Quality Control Based on Minimum Overall Mean Quality Loss
- Catalyst Study for Carbon Nanotubes Synthesis by Flame
- Fuzz Modeling and Evaluation on the Reliability of Coal Mine Ventilation System
- Effects of Temperature for Carbon Nanotubes Synthesis
- Weft Knitted Pattern Designing Based on the Wave Filter
- Study on Photo-Electro-Chemical Catalytic Degradation of Reactive Brilliant Red X-3B
- A First-Principles Study of Hydrogen Molecules Adsorption on Graphene
- Design of Material Management System for Small-and-Medium-Sized Garment Enterprises
- Study on Three-Dimension Computer Simulation of Plain Knitted Fabrics
- Determination of Austenite Grain Coarsening Temperature of a Nb-Microalloyed Steel Sheet
- A New Method for BOM Modeling
- Experimental Research on the Normal Absorption Coefficient of the Multilayer Material
- The Optimized Design for Groove Parameters Based on Cement Pavement Materials Performance
- Industrial Diversification and Regional Development Stability: Theoretical Discussion
- Flow Stress Constitutive Equation of Age Hardening Cu-1.1Cr Alloy during Hot Compression Deformation
- Computer-Aided Design and Fabrication of Bio-Mimetic Materials and Scaffold Micro-Structures
- Study on Bonding Performance of Interlayer Materials between Old Cement Slab and Asphalt Overlay
- A Multi-Dimension Configuration Method of Modular Machine Tools Based on Customer Requirements-Driven
- A Method of Obtaining Gray Balance Data Based on Polynomial Regression
- Design and Implementation of Boot Loader Based on Embedded System Platform
Les mer
Produktdetaljer
ISBN
9783037850619
Publisert
2011-04-25
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1400 gr
Høyde
240 mm
Bredde
170 mm
Dybde
34 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
680
Redaktør