Preface and CommitteesChapter 1: CompositesPreparation and Properties of Nanocomposites Based on Poly(Vinyl acetate) and Montmorillonite Organized with Acrylic AcidMechanism of Silicon/Carbon Reaction for β-SiC Bonded SiC MaterialsEffect of Particles Diameter on the Properties of Ni Group ER FluidEffect of Magnetic Field Treatment on Temperature-Sensing Property of Polyethylene-Based PTC CompositesPreparation and Characterization of ZrO2/CNTs by Hydrthermal MethodOptical Properties of in-Doped Wurtzite ZnO Based on First-PrinciplePreparation and Microwave Absorption Property of the Core-Nanoshell Composite Materials Doped with NdIllumination Control System and Drive Design of Large Power LED LightsThe Semantics of the Modern Ceramic ProductsGraphene-Poly(Methyl Methacrylate) Composites Prepared by Two MethodsFold-Resistant Characteristics of the Laminate Composites for Flexible StructureMicrostructural Observation of Ni-WC Surface Alloyed Carbon SteelStudy on the Precipitation Behavior of the Drill Pipe Steel Microalloyed with NbThe Innovative Design of New-Style Clamping Automobile Tires Conveyance Based on TRIZResearch and Application of New Oxygen Lance for BOF Steelmaking In Situ Production of Fe-TiC Surface CompositePreparation of a Simple Heat-Resistant Coating of the Optical Fiber Embedded in CompositesSynthsis of [1,2,5]thiadiazolo[3,4-C]pyridine: A Novel Analogue to BTPreparation and Property of Epoxy Based Nano-SiO2/TiO2/Polyimide Hybrid Enhanced SizingOptimum Design of Composite Armor against Transverse ImpactSignificant Enhancement of Triterpenoids Production by Phomopsis Elicitors in Cell Suspension Cultures of Betula Platyphylla Suk.Preparation, Characterization and Properties of Crosslinked Chitosan/Palygorskite Resin with Tannic Acid as Template MoleculesInterfacial Combination and Mechanical Properties of BC/PVA Multilayer Composite HydrogelsEffects of Phenolic Oligomer on the Dynamic Mechanical Properties of Nitrile Butadiene RubberEffect of Emulsified Asphalt on Temperature Susceptibility of Cement Asphalt MortarStudied Catalysis of CuO Nanocrystal on KClO4 DecompositionInserting the GS1 to HACCP System to Guarantee the Food SafetyEffect of Volume Fraction of Reinforcement on the Microstructure and Mechanical Properties of In Situ (TiB+TiC)/Ti CompositeTribological Properties of Aluminum Alloy Coating Deposited on Magnesium Alloy Surface by Cold SprayEffect of Aspect Ratio of Micro Sphere Lens Arrays on the Optical Property of DiffuserThe Mechanical Characteristics of Straw/poly(Lactic Acid) Composite MaterialsStudies on Preparation and Methanol Permeability of PVDF-g-PAMPS MembraneActivated Carbon Supported Iron Catalyst for the Fischer-Tropsch SynthesisStudy on the Synthesis and Characterization of Polylactic Acid/Maleic Anhydride CopolymerThe Preparation Method of Solid Electrolyte Lanthanum Fluoride PowderReaction Sintering of Carbon Fiber Reinforced Silicon Carbide Composite by Gel-Casting Method with Water Soluble Epoxy Resin as Gel FormerBuckling and Post-Buckling Analysis of Symmetrically Angle-Ply Laminated Composite Beams under Thermal EnvironmentsChemical Preparation and Characterizationof Polypyrrole-Polylactic Acid Conductive Composite MembranesMechanical Study and Microscopic Characterization of Lignin/PE CompositesInvestigation of Phase Composition and Microstructure of the B4C/BN Nanocomposite Powders Fabricated by Chemical Reaction and Heat Treatment ProcessInfluence of Processing Temperature on the Failure Behavior of Fabricated CompositesThe Thermal Properties of Polystyrene/Magnetic Polyhedral Oligomeric Silsesquioxane (POSS ) Nanocomposites Prepared under Magnetic FieldEffect of Microelements on Sn-20Bi SolderThe Preparation and Characterization of Solid Superacid S2O82-/SnO2-SiO2Intercalation Lithium Behavior of Molybdenum Disulphide as Anode Materials for Lithium Ion BatteryModel Test Research on Subsidence of Geogrid-Reinforced and Pile-Supported FoundationAnalysis of Patch Bonded Repair to Carbon Fiber Composite Laminates with Low Velocity Impact DamageRemoval Soil Lead (Pb) from EDTA Leachate by Bentonite and Modified BentoniteStudy on Structures and Properties of CaSO4 Whiskers/PVC CompositesAn Experiment Study on the Moisture Absorption and Desorption Characteristic of Humidity-Controlled Composite Building Blocks in GreenhouseAn Approach to Establish Interlaminar Micro Structure of 3-3 Connectivity in Laminated CompositesPreparation of Carbon-Encapsulated Alloy Nanomaterials by Detonation Decomposition of Nitrate Complex Explosives Containing Multi-Metallic IonsA Simple Method to Disperse Carbon Nanotubes by Shearing ProcessPreparation of Imidacloprid Microemulsion and its Formula OptimizationEffect of Ceramic Powder Size on Microstructure and Mechanical Properties of Ti(C, N)-Based CermetsThe Damage and Texture Features of High-Speed Rail(THS) Wheel Tread Based on EBSDEvaluation Methods for the Dynamic Humidity Control Performance of Humidity-Controlled Composite Materials in GreenhouseResearch on Mechanical Properties of FMLEffects of Modified Carbon Nanotubes on Curing and Mechanical Properties of N-Phenyl Maleimide/Bismaleimide CompositesThe Effect of Carbon Substrates on In Situ Synthesis Carbon Nanotube and Carbon Nanospheres by CVD ProcessResearches on the Strength of Composite Material Barrels Based on Continuum Damage MechanicsNumerical Simulation of the Change of Gas Hydrate Layer of Qinghai-Tibet Plateau in Global Warming SituationStudy on Threading-up Characteristics of Buttress Thread of Petroleum CouplingEffect of 11S/7S Ratios on Mechanical and Barrier Properties of Edible Films Based on Soybean Protein IsolatePreparation and Properties of Antistatic SMS Composite NonwovensInfluence of AC Driving Current on Magneto-Impedance Effect in Glass-Covered Co-Based MicrowireElastic Constants and Thermodynamic Properties of Cu, Cu2O and CuO from First-Principles CalculationsPerformance of Concrete Made with Manganese SlagStudy on Using Numerical Method to Predict Wear Volume of RailAnodic Oxidized Titania Nanotubes as Drug DeliveryCrystallization Properties of Polypropene/Graphene Oxide NanocompositesFinite Element Analysis of Centrally-Debonded Composite Sandwich Beam under Four Point BendingA New Test Setup for Experimental Test of RC Beams under Combined Shear and TorsionPoly(Imino Ketone)s Containing Sulfone GroupStudy on the Disaggregation of Photosensitizer Pentalysine β-Carbonyl-Phthalocyanine Zinc In VitroSynthesis and Characterization of Nickel-Based Monolithic Aerogel via Sol-Gel MethodResearch of Plastic Material Dynamic High-Speed Tensile Machine’s Measurement and Control System Based on FPGAChapter 2: Micro/Nano MaterialsReview on Research Status of Friction Stir Welding TechnologyCoupling Grafting Modification of Nano-ZnO Using N,N’-Carbonyldiiimidazole as ActivatorInjury on Blood Systems Caused by Silicon Dioxide NanoparticlesExperimental Study on the Deformation Performance of Cement-Stabilized Macadam Reinforced with FiberMicrostructures and Mechanical Properties of Cast Aluminum Bronze Enhanced by Modified Nano-SiC PowdersEffects of Liquid Nitrogen on Cryogenic Machining of Aisi D2 Hardened SteelA Study on Mathematical Modeling Technology for Magnetic-Fluid GrindingResearch on Fibrillated Nanofibers and Application of High Efficiency Filter MaterialStudy of Oxidation and Passivation Behavior of Fe NoparticlesPreparation and Properties of Alginate FibreEffect of Bentonite Binder on Adsorption and Cation Exchange Properties of Granulated Nano NaY ZeoliteControlling Aspect Ratio of Copper Group Nanowire Arrays by Electrochemical Deposition in the Nanopores of AAOPreparation of Nano-CuS by Phase-Transfer Method and its Application to CuS Modified ElectrodeStudy on Properties and Cross-Linking Structure of NR Dried by MicrowaveResearch on the Process of a Green Method for Preparing the Alumina NanofibreA Simple and Sufficient Method to Fabricate ZnO Nanowire Thin-Film TransistorsTrial Research on the Engineering Properties of the Roaming PolyurethaneHydrothermal Synthesis and Photocatalytic Properties of Flower-Like CdS NanostructuresInfluences of Additive Si on the Synthesis of Diamonds Using Fe Power as CatalystEffects of Hydrogen on Electrochemical Behaviors of X80 Steel in Simulated Soil SolutionFormulation of Vanillin Cross-Linked Chitosan Nanoparticles and its CharacterizationThe Controllable Flexible Features of ZnO Thin Film Gas SensorFinite Element Analysis of the Effect of Blank Holder Force on Deep Drawing of Bottom of Vacuum FlaskTribological Property of Nano-Cu as Additive in Lubricating OilA Multi-Function Agent Used in Drilling Fluid and Completion Fluid MFA-1Numerical Exploration of the Defect’s Effect on Mechanical Properties of Nanowires under TorsionFirst Principles Study on Shear Deformation of TIN/BN/TIN InterfaceCorrosion Behavior of TP95S Anti-Sulfur Casing Steel in High Temperature High Pressure H2S/CO2 EnvironmentStudy on the Precision Forging Processes of Gears Using FEM AnalysisStudy on Antibacterial Efficacy and Catalytic Capability of Nanocrystalline MagnesiaPreparation and Characterization of ZnO Nanowire Arrays Grown on Different ZnO Seed Layers by Hydrothermal MethodStudy on the Surface Quality of Fender NC Incremental FormingGeometrically Nonlinear Analysis of Cross-Ply Laminated Composite Beams Subjected to Uniform Temperature RiseInvestigation on Dislocations in C-Plane Electron-Irradiated GaN Epilayers by Wet Chemical EtchingSoft Modeling of Wire Electrical Discharge Machining of WC-Co CompositeChapter 3: Steel and IronSimulation and Experiment of Dynamics of Flange Structure with Bolted JointAnalysis on the Influence of Vibration Performance of Air-Gap of Ceramic Motorized SpindleMicrostructure and Properties of Forging Engine Valve SeatStudy on Recarburization by a New Carbon-Manganese Alloy CarburantStudy on the Relations between the Structural Parameters and the Dynamics PropertiesEffect of Solid Solution Treatment on Corrosive Action of 00Cr26Ni5Mo2Cu3Re Duplex Stainless Steel in Acid StageNovel Active Disturbance Rejection Control for Permanent Magnet Linear Synchronous Motor without SensorMicrostructure and Mechanical Properties of 45 Steel by Zero Time Holding QuenchingResearch on the CAD / CAM Collaborative Mode Based on the IOTPrecipitation Behavior and its Effect on Strengthening of High Strength and Toughness Drill Pipe SteelContinues Cooling Transformation Behavior of Low Carbon Mn-Nb-B SteelWeb Based Dss for Inventory and Scrap Optimization in a Printing & Packaging IndustryEffects of Geometry on Aerodynamics of CFOPerformance of Externally Pressurized Dry Gas SealThe Study on the Low Yield Strength for Super Fine Grain and High Strength Bearing Nb if SteelStudy on Kinematics and Simulation of Robotic ArmDesign of a Generic Postprocessor Based on UG3-D Stress Analysis of Pneumatic Pen Cylinder with Preload in Mounting NutSize Dependent Pull-in Phenomena in Electro-Statically Actuated Micro-Beam Based on the Modified Couple Stress TheoryThe FEM Analysis for Magnesium Alloy Honeycomb PanelInfluence of Carbon Content on the Microstructure and Precipitates of the V-N Microalloyed SteelsDynamic Search Structure Failure Path Method Based on Element Birth and Death Technology for Overhead Traveling CraneThe Effect of the Native Oxidation on the Characteristic of Surface Electron in the In0.13Al0.87N Epilayer Grown by MOCVDThe Finite Element Analysis of Sandwich Variable Cross-Section Plate Bending PerformanceChapter 4: CeramicEffect of Gd2O3-Nd2O3 Compound Additive on Crystallization and Sintering of Fused Quartz Ceramic MaterialsSynthesis and Luminescent Behavior of Mn(1-X)S:AX/ZnS Core/Shell NanocrystalsFlaky and Porous Rod-Like MgO Powders Prepared by Molten Salt SynthesisInfluence of Temperature on the Densification and Lattice Parameters of Sialon CeramicNumerical Simulation for Flow Field in HydrocycloneMicrostructure Simulation and Toughening Mechanism of Ceramic Tool MaterialInfluence of Nano-ZnO on Crystallization Behavior and Sintering Performance of Fused Quartz Ceramic MaterialsPreparation and Microstructure of Pressureless Sintered Si2ON2-SiC CeramicInfluences of Progressing Parameters on Flake BaBi4Ti4O15 Powder Synthesized by Molten Salt Synthesis MethodPreparation and Performance of Micro-Arc Oxidation Ceramic Coating of Titanium Alloy in Low Current DensityEffect of Si3N4-Y2O3 Compound Additive on Crystallization and Sintering of Fused Quartz Ceramic MaterialsTechnology Research of Silicon Carbide by ExtrudingEffects of Monoclinic ZrO2 with Different Particle Size on Properties of Zirconia RefractoriesEffect of Si3N4-Nd2O3 Compound Additive on Crystallization and Sintering of Fused Quartz Ceramic MaterialsStudy on Transitional Metal Oxides Energy-Saving Materials with High-EmissivityFabrication and Mechanical Properties of Nano-Al2O3 Based Composite Ceramic Tool MaterialChapter 5: Metal Alloy MaterialsA Nonlinear Study on the Prestressed Structure of High Strength Concrete - Steel Fiber ConcreteCorrosion Behaviors of QSn4-3 under Two Kinds of Marine Advantage Bacteria EnvironmentVariance Analysis from an Inter-Laboratory Comparison about Different Emission Test Methods by a Certified Green Building Material in TaiwanPreparation, Characterization and Properties of Ternary Blends with Epoxidized Natural Rubber, Poly (Lactic Acid) and Poly (Butylene Adipate-Co-Terephthalate)The Microstructure and Properties of ZL116 Alloy Obtained by the Nearby-Liquidus Electromagnetic CastingEffect of Heat Treatment and Composition on Grain Size and Lamellar Spacing of a Lamellar TiAl AlloyEIS Study of Corrosion Behavior of Hot-Dip Galvanized Steel in 5% NaCl Aqueous SolutionInfluence of Sr Addition on Microstructure and Mechanical Properties of Ignition-Proof AZ91D-0.3Be Magnesium AlloyNumerical Analysis and Experimental Results by Silicon-Based MHz Ultrasonic Nozzles to Product of Monodisperse DropletsThe Porous TiNb24Zr4 Alloys with Controllable Porosity Fabricated by Conventional SinteringEffects of Thermomechanical Treatment Process on the Microstructure and Properties of 7A04 Aluminum AlloyStudy on Fatigue Crack Propagation at Negative Stress Ratio in 2A12 Aluminum AlloyOptimization Parametric Study of Deep Drawing Process for a Standardized Cranial ImplantCombination of Extrusion and Artificial Aging to Strengthen AZ80 Magnesium AlloyEffects of Solution and Two-Stage Ageing Treatment Process on Microstructure and Properties of 6061 Aluminum AlloyElectrochemical Behaviors of Pb-Ca Alloys and Pb-Ca-SnX-Al Alloys under 60°C in 5mol•L-1 H2SO4 SolutionPeritectic Reaction of High Nb and W Pentatomic TiAl-Based AlloyMicrostructure and Properties of Microwave Sintered 40 wt. % WC Steel-Bonded CarbidesInvestigation on the Preparation Processes of Cu-Bi Master AlloyKey Technology Development Trend for Recycled Aluminum Industry Based on Technology RoadmapPreparation and Investigation on Properties of Shape Memory Epoxy Modified by Hyperbranched PolyesterFabrication of Al2O3 Based Ceramic Matrix Composite by Conventional Sintering and Sol-Gel ProcessChapter 6: Polymer MaterialsAn Efficient and Environmentally Friendly Method for the Preparation of PMMA MicrocapsulesThe Analysis of Dynamic Viscoelastic Properties of Regenerated Cellulose at Different Temperature and HumidityAc Conductivity and Dielectric Properties of Hexanoyl Chitosan-LiClO4-TiO2 Composite Polymer ElectrolytesSynthesis and Properties of Polyurethane Modified with Hydroxyl Terminated PolysiloxaneCrystallinity and Mechanical Properties of PLA/POE BlendsSynthesis and Characterization of Thermotropic Main-Chain Liquid Crystalline Polysiloxanes Containing 1,4-butylene bi-p-hydroxybenzoate MesogensDesign and Construction of Porous Structures in PVDF Membranes in Phase Separation ProcessesStudy on Preparing Light Colored C9 Petroleum Resins with High Softening PointApplication as Papermaking Retention Agent of Water in Water Cationic Polycaylamide in Bleached Soda Reed PulpMethanol Induced Changes in Structure and Properties of Dry Spinning Fibers of Regenerated Silk FibroinThe Choice of the Simulation Skin in the Experiment of Dynamic Moisture Transfer Based on Munsell Color IndexStudy on the Thermal Behaviors and the Morphology in PVP/ PA66 BlendsDevelopment of Surface Roughness Prediction for Steel in CNC Turning by Using Response Surface MethodChapter 7: Optical/Electronic/Magnetic MaterialsStudy on Electrochromic Performance of the Copolymer Based on 4-(1H-Pyrrol-1-Yl) Phenyl 4-(1H-Pyrrol-1-Yl) Butanoate with 3,4-EthylenedioxythiopheneFabrication and Magnetic Properties of Fe3O4 Nanobranches via a Simple Solvothermal MethodSynthesis and Characterization of Ln(Mg0.5Ti0.5)O3 (Ln=La, Nd, Sm) Obtained by the Polymeric Precursor MethodSynthesis, Spectra and Bond Studies on a Novel Cu-Ru Complex of Magnetic DilutionEffect of Surfactants on Modifying the Surface of Magnetic Nanoparticles by Thermal DecompositionLow Temperature Sintering of Ca0.6La0.8/3TiO3-Li0.5Nd0.5TiO3 Ceramics with ZnO-B2O3-SiO2 Glass AdditionPreparation and Characterization of Superparamagnetic Fe3O4 Nanoparticles with Controlled SizesInfluence of Ar/O2 Ratio on the Prpoperties of Transparent Conducting ZnO:Zr Films Deposited by DC Reactive Magnetron SputteringEffects of Low Concentration BiFeO3 Additions on Microstructure and Piezoelectric Properties of (K0.5Na0.5)NbO3 CeramicsDesign and Preparation of Light-Weight Radar Absorbing Material Based on Resistive Frequency Selective SurfacesPreparation and Luminescence Properties of the Nano- Composite Materials LaF3 - SiO2: Eu3+Health Assessment Based on Fuzzy Synthetic Evaluation for Civil AircraftsElectrochemically Synthesis and Characterization of Copolymers Based on 1, 4-Diethoxybenzene and 3, 4-EthylenedioxythiopheneStudy on the Model of Magnetic Flocculation of Magneto-Rheological FluidCharacterization of Cobalt Films on X-Ray Lithographic MicropillarsMagnitude of Intrinsic Electrocaloric Effect in PbTiO3 at High Electric FieldsEnhanced Luminescence Properties of Hexagonal-Phase NaYF4: Eu3+ Microrods by Annealing TreatmentDetermination of Mechanics Properties of a Piezoelectric Material Using Indentation Method with a Cylindrical IndenterElectrosyntheses and Electrochromic Properies of a Copoymer Based on 9-(4-Pyrrol-1-Yl-Phenyl)-Carbazole and 3,4-EthylenedioxythiopheneGrowth and Absorption Spectrum of Tm,Ho:BaY2F8 CrystalTheoretical Study on Photochromism and Spectrum Properties of SpiropyranInvestigation on the Spectroscopic Properties of Yb3+-doped Phosphate GlassThe Game Analysis on Risks of Logistics Enterprises Participate in Logistics FinanceChapter 8: Materials Physics and ChemistryTheoretical Study on σ-Complexes in Ring-Chlorination of TolueneInfluence of Synthesis Technics and Additives on Cerium Ion Compound ValenceFirst-Principles Study on Electronic and Thermal Properties of Zinc-Blende Metal TellurideDyeing Properties of Acetylated Wood with Red Disperse DyesPhotocatalytic Activity of Ag+-Doped TiO2 Thin Films Prepared by Sol-Gel MethodRelation between the Reflectivity and the Moisture Content of the Dynamic Moisture Transfer of FabricsPreparation and Thermal Decomposition of the Polyoxometalate Complexes of Ciprofloxacin with HnXW12O40 (X=B, Si, P)Fundamental Characteristics of SiC MIS Structure with Al2O3 as Gate DielectricSynthesis and Characterization of Novel Fluorene-Based Poly(Imino Ketone)sA Simulation of Half-Closed Extrusion Process for Steering KnuckleExperimental Research on Products Preparation by Hongquan Bentonite from GansuDevelopment of FE-Model for Al 5053 Sheet Plate Forming Using Electromagnetic ForcePhotophysical Property Investigation of Nanometer Porphyrin OligomerTesting of Precast Lightweight Foamed Concrete Sandwich Panel with Single and Double Symmetrical Shear Truss Connectors under Eccentric LoadingFabricate Dye-Sensitized Solar Cell with ElectrospiningChapter 9: Structural MaterialsResearching about Removing Cadmium from Thallium-Bearing Materials with Vacuum DistillationA Rural Residential Building Products Quality Evaluation Algorithm Based on Rough Set TheoryExperimental Research on Pore Structure of RCA and its Impact on Drying ShrinkageStudy and Analysis on Pile-Soil Stress Ratio of the Composite Foundation of Cement-Soil Mixing Pile under Flexible FoundationResearch on Fiber Shotcrete for Underground EngineeringResearch on Environment-Friendly Soil Stabilizer Solidifying Buildings Residues for Paving MaterialsConfiguration of Low-Strength Self-Compacting Concrete Adapted to Local Raw MaterialsEffect of Aggregate Pre-Wetting and Air-Entraining Agent on Durability of Lightweight Aggregate ConcreteInfluence of Mineral Admixtures on Chloride Threshold Value for the Corrosion of Steel ReinforcementA Novel Approach of Chitosan Additive to Remove Formaldehyde from Building MaterialsResearch on Impact Damage of Polypropylene Fiber Mortar Based on Axial Compressive StrengthExperimental Researches on Fire Resistance of CFS Shear Strengthened Reinforced Concrete BeamsThe Effect of Fly Ash on Water Transport of Concrete in Dry StateAbout on Low-Alloy Coupled Steel Bars Concretes Rigidity and Crack Opening Model Formula EstablishmentUtilization of Lightweight Aggregate from Expanded Obsidian for Advanced Thermal Insulating Plasters ProductionStudy of Prediction Model for Compressive Strength of Lightweight Aggregate ConcreteMethod Study on Generation-Dissipation of Seismic Pore Water Pressure in Saturated SandsStudy on Inorganic Cohesive GlueThe Sucrose-Natural Gypsum Makes the Compound Retarder to the Cement and the Concretes Performance Influence Experimental StudyExperimental Research on Isothermal Sorption of RAC MaterialResearch on the Mechanisms of Soil Agent Solidifying Buildings ResiduesResearch on Seismic Behavior and Cost Estimation of a New Concrete Filled Steel Tube Frame StructureChapter 10: Functional MaterialsFabrication of Fuel Cells with High Power Density Using Micro Electrical Discharge Machining MillingInfluence of the Strain of AlN Buffer Layer on the Strain Evolution of GaN Epilayer Grown on 3-in 6H-SiC SubstrateResearch on Slaked Magnesium Slag as a Raw Material and Blend for Portland CementBioactivity and Biocompatibility of Na2O-K2O-CaO-MgO-SrO-B2O3-P2O5 Borophosphate GlassFabrication and Preparation of Coal-Water Slurry Dispersant with Amphoteric PolycarboxylateEffect of Electrical Characteristics Modification on Viscosity of Kaolin SuspensionRealization of a Wideband Microwave Noise Filter Used Magnetic Multilayer Thin Films by Using Exchange Bais Stacks StructureStudy on Operation and Control of Large Multi-Chiller SystemConstructing a Syntheses Table of the Standard Amino Acid Based on the PAM250 MatrixThe Development of UMo/Al Dispersion FuelA Technology of Self-Emulsification Coacervation to Prepare Starch Sodium Octenyl Succinate (SSOS) Microcapsules Consisting of Evening Primrose Oil (EPO)Isothermal and Non-Isothermal Crystallization Behavior of Poly(L-Lactic Acid) with Nucleating AgentsStudy on the Polyol Synthesis of LiFePO4 for Lithium Ion BatteriesManufacture of Carbon Supported PtCuLaOX Membrane Electrode with Low Pt Loading by IBS TechnologyApplication of Magnetite Mill Tailings and Solvay Distiller Waste in Foamed Concrete In SituThe Foreground Analysis of Sewage Sludge Agriculture Application in ChinaExperimental Investigation on Simply Supported PFRP Channel Beams Subjected to Three-Point LoadingSp2 Hybridization Effects on Friction of Diamond-Like Carbon Film (110) Surfaces Studied by First Principles Molecular DynamicsExperimental Study of Magnetorheological Elastomer Vibration IsolatorDeinking Technology and Deinking Agent of Waste PaperPreparation and Application of Talc-Fiber Composite Fillers in Paper-MakingExperimental Application of Salt Slurry in Zhongyuan High Density Polymer Saturated Brine-Based Drilling FluidSynthesis of Flavor 3-Methylthiopropionaldehyde Diethyl AcetalNet-Like ZnO/Carbon–Aerogel Composite as Anode Material for Ni-Zn Secondary BatterySynthesis of LiFePO4/C by Carbon Thermal Reduction Method and its Electrochemical PropertiesStudy of EDLC and its Usage in Stand-Alone Photovoltaic SystemDesign and Optimization of Injector Structure in Diesel Engine Based on ISIGHT Platform DOE MethodsFlocculation Removal of Microcystis Aeruginosa by Chitosan-Bentonite Compound MaterialPhotocatalytic Degradation of Methylene Blue over Co-Ag3VO4 under Visible Light IrradiationWater Barrier Property of Gelatin-Based Films Cross-Linked with Microbial TransglutaminaseEffect of Drying Treatments on Anthocyanin, Fumonisin B1, Aflatoxin B1 Content of Anthocyanin Extract from Purple Corn (Zea may L.) in North ChinaThe Role of CdS Buffer Layer in ZnO Nanowire Arrays/SnS Thin Film Solar CellsPreparation of Cu2ZnSnS4 Film by Printing Process for Low-Cost Solar CellInvestigation of Thermal Insulation Materials Based on Easy Renewable Row Materials from AgricultureFerroelectric Property of Ion Beam Enhanced Deposited Lithium Tantalate Thin FilmThe Effect of Concentration of Phosphoric Acid on the Degree of Reduction of VPO CatalystExtraction Behavior of Rare Earths in Ion Liquid Extraction System Using 1-Butyl-3-Methyl-Imidazolium Hexafluorophosphate and Benzoyl AcetoneThe Influence of Alkyl Group on Needle Coke FormationPreparation and Properties of PLA Microspheres Containing ENRO by an S/O/W Emulsion TechniqueDependence of Hysteresis Loops on Thickness of Thin Nickel Films Prepared by RF SputteringHydrolysis of Glucose to 5-HydroxymethylfurfuralPreparation of Porous HA Bioceramics by Gelcasting and Pressureless SinteringCharacteristics Analysis of Acoustic Emission Signals from Titanium under Tensile FractureRecovery of Sc3+ from Red Mud Leaching Solution by Emulsion Liquid MembraneThe Study of Using TiO2 Nanotube Arrays as a Drug Delivery for AlendronateCutting Parameters Optimization Based on Radial Basis Function Neural Network and Particle Swarm OptimizationPreparation and Properties of Bacterial Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) FibersResearch on Controllable Effects of HI Ultrasonic Radiation to Active Composition in HippophaeThe Modification of VPO Catalyst Precursor and CharacterizationBiosorption Behavior of U(VI) in Wastewater Containing U(VI) by Immobilized Saccharomyces CerevisiaePreparation and Characterization of Poly(Lactic Acid) / Montmorillonite Nanocomposites via a Masterbatching MethodEffect of Pretreatment of Traditional Chinese Medicine Residue on the Biogas ProductivityEffect of Conformable Substrate Thickness on an Eddy Current Sensor Array’s Output CharacteristicsPhotocatalytic Activities of Mo Ions Implanted TiO2 Thin FilmsPreparation and Properties of Polytriphenylamine/Multi-Walled Carbon Nanotube Composite as a Cathode Material for Li-Ion BatteriesEvaluation on Combustion Properties of Nanoparticle as Fuel AdditiveManaging Product Quality and Reliability under New ChallengesEnergy Consumption and Emissions Analysis of Natural Gas Exploitation