Produktdetaljer
ISBN
9783038353874
Publisert
2015-03-04
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1890 gr
Høyde
240 mm
Bredde
170 mm
Dybde
52 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1042
Collection of selected, peer reviewed papers from the 2014 3rd International Conference on Applied Mechanics and Materials (ICAMM 2014), November 15-16, 2014, Shenzhen, China.
The 191 papers are grouped as follows:
Chapter 1: Solid Mechanics and its Applications;
Chapter 2: Fluid Mechanics and its Applications;
Chapter 3: Computational Mechanics and its Applications;
Chapter 4: Mechanics of Explosion and Technologies of Blasting;
Chapter 5: Structural Mechanics, Geotechnical Mechanics and Infrastructure Construction; Chapter 6: Building Materials;
Chapter 7: Composites;
Chapter 8: Micro/Nano Materials;
Chapter 9: Metals and Alloys;
Chapter 10: Chemical Materials and Processing Technology;
Chapter 11: Biological and Environment-Friendly Materials;
Chapter 12: Physics of Materials, Properties and Methods of Research;
Chapter 13: Materials Processing Technology;
Chapter 14: Surface Engineering, Materials and Technologies;
Chapter 15: Thermal Analysis and Monitoring of Machines and Equipments
Les mer
Selected, peer reviewed papers from the 2014 3rd International Conference on Applied Mechanics and Materials (ICAMM 2014), November 15-16, 2014, Shenzhen, China
- Preface and Conference Organization
- Chapter 1: Solid Mechanics and its Applications
- Analysis of the Crack of Heavy Dump Truck Cargo Body Floor
- Coil Failure Mode Analysis for Fiber Carbon Composite Core Rod Used in Overhead Stranded Wires
- Experimental Method of Slip and Surface Temperatures for a Silicone-Oil Fan Clutch
- Influence of Geometrical Features of Meso-Defects on Damage Evolution of Metal Structure
- Numerical Study on the Anti-Ballistic Properties of Metal Encapsulating Ceramic Composite Armors
- Parametric Selection of Dynamic Vibration Absorbers for Resonant Suppression of Structure-Absorber Systems
- Research on Stress-Free Rail Temperature Design of Wubei-Xiaohuangshan Railway
- Torsion Test of Fiber Carbon Composite Core Rod Used in Overhead Stranded Wires
- Theoretical Research of Vertical Crack Propagation in Overlaid Cement Concrete Pavement
- Neimark-Sacker Bifurcation of Rolling Bearing System with Fault in Outer Ring
- Study on Mechanical Response Changes of Pavement to Aircraft Loads with Different Landing Gear Configurations
- Study on Numerical Model of the Collision Effect between River Ice and Flexible High Pier
- Analysis and Design of Lifting Pole Made of Carbon-Fiber Reinforced Resin Matrix Composites
- FEM Modeling of End-Plate Assembling Bolt Connections of CHS Profiles
- Numerical Simulation and Analysis of Hydraulic Torque Converter Base on Finite Element
- Quasi-Static Characteristics Analysis for Barge Bow Structure Based on Experimental and FEA Study
- Large Equipment Hoisting Balance Beam Structure Optimization
- Fatigue Strength Study on Radial Bogie Vice Frame Based on Finite Element Analysis
- Experimental Study on Vertical Stiffness of WJ-8 Fastener for High-Speed Railway
- Application of Orthogonal Experimental Method in the Sealing Design of a Bolted Flange Connections
- Chapter 2: Fluid Mechanics and its Applications
- A New Approach to Calculate Shutdown and Restart Pressure of Waxy Crude Pipeline
- Analysis of Loads and Response on Flexible Riser under the Combined Effects of Wave and Current
- Difference Schemes for Three Kinds of Nonlinear Flow Model in Low Permeability Porous Media
- Experimental Investigation of Solid Attitude Control System Using Proportional Pintle Thrusters
- Initial-Boundary Value Problem on Unsteady Flows in a Canal
- Numerical Simulation of Flow Field in the Tundish with Two Outlets
- Numerical Simulations and Experiments on Changes in Erythrocyte Morphology under Continue Flow Ventricular Assisted Devices
- Study on the Design of Wetland Based on Hydrodynamic Condition - A Case of Candle Lake Wetland at Qingxiu Mountain Scenic Spot in Nanning City
- The Influence of Characterization of Metallic Gasket Rough Surface on Gas Sealing Performance in Seal Structure
- The Kinematic Analysis of Double Water Jets Ship
- 3D Numerical Simulation and Experimental Analysis of Spillway Tunnel
- Dynamics Simulation of Particles of a Smoke Generator Based on SPH Method
- The Element-Free Galerkin Method for the Unsteady Magnetohydrodynamic Flow in a Duct
- Influence of the Distribution of Dual Cascades on Double Vanes Based on the Solid-Liquid Two-Phase Flow
- Characteristics of Flow around a Modified Square Prism
- The Concept and the Contents of Process Fluid Mechanics
- A New Type of Joint and its Numerical Analysis
- Chapter 3: Computational Mechanics and its Applications
- A Coupling Difference Scheme of Thermo-Hydro-Mechanical Model on Unsaturated Porous Media
- Active Set Algorithm Applied to Discrete Mechanics and Optimal Control for Constrained Systems
- Dynamical Equations of Flexible Multibody Systems under Lie Group Framework
- Low-Speed Preconditioning for AUSM+-Up Scheme
- A Fluid-Structure Interaction Based Numerical Investigation on the Outlet Condition of Artery Basic Model
- A Kind of Optimization Method on Plate-Shell Structures with Stiffeners
- FE Simulation of Torque and Drag inside Borehole of Oil and Gas Wells (Part II)
- Finite Element for Simulating BHA-Casing-Rock Interactions
- Typical Hull Structure’s Longitudinal Strength Calculating Methods
- Chapter 4: Mechanics of Explosion and Technologies of Blasting
- Numerical Analysis on the Behavior of Autoclaved Aerated Concrete Block Infilled Wall Subjected to Gas Explosion
- The Experimental Research of Air Explosion of Non-Ideal Explosives
- Numerical Simulation of Blasting-Induced Damage in Grouting Curtain of Sandstone Aquifer for Vertical Shaft
- Research on the Law of Propagation and Attenuation of the Explosive Stress Wave in Surrounding Rocks at Different Levels
- Smooth Blasting Construction Technology of Urban Shallow Subway Tunnel
- Numerical Simulation on the Deepwater Effect of Underwater Explosion Shock Wave
- Chapter 5: Structural Mechanics, Geotechnical Mechanics and Infrastructure Construction
- Experimental Study on Dynamic Responses of a New Type of Debris Flow Dam under Solid Impact Load
- Measures to Control the Temperature of the Concrete Cracks in Foundation Mass
- Research of Impetus Tendentiousness in Yuncheng Mine 3# Coal Seam
- Shear Failure Mechanism of Infilling Rock Joints and its PFC Simulation
- Shear Properties and Strength of Weak Intercalated Layers in Dam Foundation of Datengxia Power Station
- Simulation and Analysis of the Failure for the Water Stop Curtain of Building Pit in Round Gravel Level
- Stability of Gas Drainage Borehole Analysis on Rock Mechanics Parameters with Roadway of Complex Stress
- Study on the Strength of Different Door-Type Structure of Attached Type Lifting Scaffold
- The Application of Fuzzy Optimization Theory in the Selection of Foundation Improvement Methods
- The Effect of the Pile’s Diameter on the Bearing Capacity of Different Pile-Anchor Support Structures
- Research on Mechanical Behavior of Hold-Welding Beams with Different Solder Joint Arrangements in Pallet Racks
- Application of Interface Element in Dynamic Analysis of CFRD
- Applications of Seismic Isolation Retrofitting in Historic Buildings
- Discuss on Tunnel Design for High Speed Metro Line
- Finite Element Model Updating of T Beam Bridge Based on ANSYS
- Stability Analysis of Narrow and Long Excavation in Soft Soil Area
- Experimental Study on Historic Masonry Walls Retrofitted with GFRP Sheets in Different Patterns
- Non-Linear Numerical Simulation on Hysteretic Behavior of SRC Columns
- Nonlinear Analysis for RC Beams Strengthened by Externally Bonded Steel Plates with Bond-Slip
- Chapter 6: Building Materials
- Analysis on Thermal Stresses Adaptability to High Grade Asphalt Pavement Structure in Qinghai-Tibet Plateau
- Ceramsite Foam Concrete Insulation Block
- Mechanism of the Modified Carbon Nanotubes Toughening DSP Cement Mortar
- Prediction of Steel Bar Corrosion of RC Members Deteriorated by Pre-Existed Chloride and Concrete Carbonation
- Research and Development Display Agent Determination of Nitrite Content in Concrete
- Research on Bearing Capacity of Concrete Filled Double Skin (CHS Inner and SHS Outer) under Eccentric Compression
- Numerical Simulation of the Fiber Pulled out from Steel-Fiber Concrete
- Stability of Floating Body Using Moderate Lightweight Concrete Mixed with Crumb Rubber and Polymer
- Technical Research on Application of Warm Mix Flame-Retardant Noise Reduction Asphalt Mixture
- Effect of Steel Fiber on Comprehensive Performance of Concrete Materials
- Heterogeneous Shrinkage of High-Strength Concrete by the Volume of Large-Size Structural Elements
- Progresses in Concrete Technology
- Synthesis of Pure Thaumasite
- The Inversion of Concrete Thermal Conductivity Using Least Squares Finite Element Method
- The Effect of Expanded Perlite on the Performance of the Lightweight Wall Materials
- Study on the New Waterproof Bonding Material of Bridge Deck Pavement
- Chapter 7: Composites
- Graphite/Copper Composites with High Density
- Studies on (SBA-15)-AgI Host-Guest Nanocomposite Materials
- Effect of Dwell Time and Heating Rate on Thermal Residual Stresses in Co-Cured Aluminum/Composite Hybrid Shaft
- Research on Microscopic Damage of GFRP Tensile Properties
- Chapter 8: Micro/Nano Materials
- A Molecular Dynamics Study on the Physical Properties of (CuPd)147 Alloy Nanoparticles
- Effects of Nano-Diamond Seeds on Mechanical Properties and Surface Morphology of Diamond-Like Carbon Films
- Enrichment of Lead Element from Air Using Electrospun Nanofibrous Membrane Prepared by Co-Electrospinning of Dithizone with Polystyrene
- Immobilization of Papain on Flexible Magnetic Nanoparticles
- Mechanical Properties and Surface Morphology of Diamond-Like Carbon Films with SiNx Interlayer
- Preparation of ZrO2-Silica Microspheres by Layer-by-Layer Self-Assemble Technique
- Synthesis and Characterization of Graphene–Cu Nanocomposites by One-Pot Solvothermal Approach
- Properties of TiO2 Thin Film Prepared by Sol-Gel Dip Coating
- The Effect of Micro and Nano Particle Sizes of HZSM-5 for Coupling Conversion of Methanol and 1-Butene
- The New Progress on Synthesis of Cadmium Selenide and Lead Selenide Nanostructures
- The Synthesis and Properties of Metal Selenide Nanostructures
- Effect of Crystal Orientation Agents on Morphology of Nano-CaCO3
- Chapter 9: Metals and Alloys
- Atomic Structure and Diffusion Properties of Liquid Cu45Zr48Al7 Metallic Glasses
- Microsture and Properties of a Cu-Cr-Zr-Fe-Ti Alloy
- Temperature Field Measuring and Simulation of CMSX-6 Superalloy during Directional Solidification
- Parameter Evaluation of the Chaboche Model with Kinematic Recovery Term for a Nickel-Based Superalloy
- Research on Corrosion Behavior of A3 Steel in Compound Sodium Molybadate Inhibitor Solution
- Simulation of Microstructure and Dynamical Properties in Ni-Al Alloy under Different Pressures
- Chapter 10: Chemical Materials and Processing Technology
- Ethanol Catalytic Oxidation on Yb Promoted Pd/C in Alkaline Medium
- Exploration on the Relationships Based on the Offset Overprint Trapping between the Optical Density and Color Ink Film Thickness
- Kinetic Study of the Adsorption of Dye onto Cotton in SDS-CTAB Reverse Micelles
- Preparation and Properties for Solid Solution Ce0.8Pr0.2-xSmxO2-δ(x=0.02, 0.05, 0.1)
- Selectively Catalyzed Oxidation of Benzyl Alcohol by FeIII–TAML/Hydrogen Peroxide
- The Research of Thiosemicarbazide Modified as Acidizing Corrosion Inhibitor
- Fabrication and Analysis of β-Sialon Whiskers from Fly Ash by Carbon Thermal Reduction-Nitridation
- On the Chemical Reduced Large Specific Surface Area Graphene Oxide and its Electrochemical Performances
- Photoelectro Degradation of Rhodamine B on Co-Doped TiO2 Films under Visible Light
- Selective Oxidation of Methane to Methanol with Organic Oxidants Catalyzed by Iodine in Non-Aqueous Acetic Acid Medium
- Synthesis of High-Purity Methylal by Reactive and Extractive Distillation
- Thermodynamic Equilibrium Calculation of Oxygen-Fuel Process of Calcium Carbide Production
- Use of Fleshings-Derived Collagen in Chrome Tanning Process
- Ammonia Leaching Study on Carbonate Oxidised Copper Ores in Yunnan
- Comparison of Removal Efficiency of Formaldehyde by Chlorine Dioxide, Photocatalyst and Active Carbon
- Structure and Performances of Plasticized Melt-Spun Polyacrylonitrile Precursor Fiber
- Preparation and Performance of Phase Change Materials of PEGA-g-CEA
- Synthesis of a New Fluorinated Carbon Material
- Room-Temperature Fabrication of Flexible Thin-Film Lithium Batteries Based on Solid Electrolytes and Polyimide Substrates
- Effect of Doping Metal Ions on the Structure Transformation of Octahedral Layer Structure Manganese Oxide
- Study on Preparation of Zn/Al Double Metal Oxide by Ion Exchange Method
- A New Kind of Material for HPLC – Dioscin-Bonded Silica Gel Stationary Phase
- Preparation and Properties of Porous Glass-Ceramics with Fly Ash
- Synthesis of Photoluminescent Carbon Nanodots and their Inarching with Quercetin
- Chapter 11: Biological and Environment-Friendly Materials
- Adsorption Performance of Pummelo Peel to Rhodamine B
- Effect of the Enzymatic Hydrolysis on Starch Properties
- Foliar Application of Abscisic Acid and Sulfonamide Compounds Induced Drought Tolerance in Watermelon
- The Experimental Study on Infrared Dryer for Corn
- The Research Progress of Coagulation Technology on Fine Particles
- Study on Microbial Transformation of 11α-hydroxy-16,17α-epoxy progesterone in Ionic Liquid/Water Biphasic System by Arthrobacter simplex
- Chapter 12: Physics of Materials, Properties and Methods of Research
- Application of Digital Image Correlation in Measuring Refraction Index of Transparent Material
- Attenuation Characteristics of Stress Wave Propagation in a Polycarbonate Rod Using Wavelet Packet Analysis
- Finite Element Analysis of Single Quantum-Dot's Spontaneous Emission in Photonic Crystal Slabs
- Investigation of the Semisolid Rheological Characteristics of AZ91D Alloy
- Molecular Dynamics Study of Thermodynamic Properties of Cu-Pd Clusters
- Pyrolysis Characteristic of Nitrogen in Carbon Fibers during High-Temperature Heat Treatment
- Research of Dinosaurs Weathering Mechanism in Zhucheng Shandong
- The Effect of Tip Materials on the Nanotribology with Atomic Force Microscope Technique
- Time Resolved Emission from Shocked Sapphire at 1.3 Mega-Bar
- Molecular Dynamics Numerical Simulation on Heat Capacity of Bi-2223
- Band Gap Characteristics of Phononic Crystal Made from Different Material
- Correlation between the Force and Magnetic Field of the U71Mn Notched Sample
- IR Spectra and Discharge Performance of Fluorinated Bamboo Charcoals
- An Experimental Research on Generalized Prandtl-Ishlinskii Model for Modeling Asymmetric Hysteresis of a Piezoceramic Actuator
- Calculation of Wavelengths, Transition Probabilities and Oscillator Strengths for E1 and M1 Transitions in Cu-Like Au Ion
- Conical Tip Wear in Transition Deformation – Wear Map Construction under Cyclic Impact of Hardness Ceramic Materials
- Study on the Relationships between Plastic Viscosity and Tack Value of Offset Printing Ink
- Property Evaluation of Synthetic Aircraft Lubricating Oil of Corrosion Inhibiting
- Optical Breakdown on the Inclined Target: The Features of the Erosive Plume Formation
- Chapter 13: Materials Processing Technology
- A Trimming Algorithm of Refined Meshes in Sheet Metal Forming
- Fabrication of Micro Electrode Array by UV-LIGA and its Application in Micro ECM
- Influence of Spray Parameters on Sliding Wear Properties of HVOF Sprayed Fe-Based Amorphous Coatings
- Research on the Fabrication of Bioceramic Composite Coatings Fabricated by Nd-YAG Laser Cladding
- Study on Mechanical Properties of Self-Piercing Riveted Joints about Titanium Alloy
- The Influences of Additives on the Corrosion Resistant Properties of Electroless Plating Ni-W-P Alloy on the Aluminum
- A Performance Study of Clinched Joints with Local Thermal Treatment
- Design and Flow Simulation on a Variable Structure Plasma Reaction Chamber
- Heat Conduction in a Thin Film which Reflects Size and Memory Effects Induced by an Ultra-Fast Laser
- Numerical Simulation on the Whole Co-Extrusion Process of Tread Rubber
- Study on the Manufacturing Process of Polymer Microfluidic Chip with Integrated Cu Micro Array Electrode
- Study on the Property of Clinched Joint in Similar-Dissimilar Sheets about Titanium Alloy
- The Analysis for Chemico-Mechanical Practices Using in Polymer Material Machining
- Using the Lattice Boltzmann Method to Simulate the Heat Conduction in a Thin Film Induced by Ultra-Fast Laser
- Experiment on Recovery of Multi-Metal from Zinc Volatile Kiln Slag in Xining
- Research on Camber Correction Method of Heavy Plate
- Progress on Research of Machining of Difficult-to-Machine Materials Using CBN Cutting Tools
- Effects of Grain Refinement on the Prevention of Edge Cracking during Hot Rolling of AZ31 Magnesium Alloy
- AZ80 Magnesium Alloy Mold Temperature Field Analysis in Isothermal-Forging by the Boundary Element Method
- Chapter 14: Surface Engineering, Materials and Technologies
- A Global Tribological Approach of Friction Dry Contact Polymer with SGF on Steel, in Terms of Consequences on Metallic Surface Condition (Comparative Wear Coefficients of Steel Surface)
- Complex Wettability and Self-Cleaning Performance of Butterfly Wing Surface
- Water/Methanol-Repellency and Wetting Mechanism of Moth Wing Surface
- Nano-Contact Force Calculation Method of Different Tip Radius of Curvature and the Specimen Surface of AFM
- Superhydrophobic Surface Preparation Technology and its Progress
- The Coating Property Study of (Meth)Acrylate Copolymer with Gradient Wettability Surfaces
- The Collision Behavior of Droplets Splitted from a Droplet that Rebounded on Super-Hydrophobic Surface
- The Characteristics of Chemisorptions on Si (001) Surface
- Chapter 15: Thermal Analysis and Monitoring of Machines and Equipments
- A Novel Rotor Temperature Estimation Method Base on Dq-Axis Flux Linkage Observation
- Numerical Calculation for Temperature Field in Two Exits Tundish
- Optimization of Thermal Structure of Conduction Cooling HTS Magnet
- Numerical Study on the Surface Convective Heat Transfer of Mass Concrete Structure
- Weight Calculation and Operation Adjustment of Factors that Influence Boiler Efficiency
- Research of Solid Materials Thermal Conductivity Measurement Based on Laser Photothermal Method
Les mer
Produktdetaljer
ISBN
9783038353874
Publisert
2015-03-04
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1890 gr
Høyde
240 mm
Bredde
170 mm
Dybde
52 mm
Aldersnivå
UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
1042