Preface1Preface2Chapter 1: Properties and Processing Technologies of Steel and AlloysIncreasing the Efficiency of Production of Synthetic Cast Iron CastingsNumerical Simulation of the Influence of Different Surface Morphologies on Molten Pool Flow under Moving Heat SourceExperimental and Numerical Examination on Formability and Microstructure of AA3003-H18 Alloy in Single Point Incremental Forming ProcessInfluence of the Different Combination of Diameters of Two Tool Heads on Forming Quality in Double Sided Incremental FormingEffect of Frictional Conditions in Deep Drawing on FormabilityMicrostructure Evolution of AlSn20Cu Alloy Prepared by Conventional Casting and Semi Continuous Casting during Rolling and AnnealingEffect of Pouring Temperature on Microstructures and Mechanical Properties of 7085 Ingot Casting by Finite Element AnalysisCoarse Columnar Dendrites of GH3039 Nickel-Based Alloy at Diverging Grain Boundaries during Wire and Laser Additive Manufacturing: A Phase Field SimulationEffects of W Addition on Microstructure and 650 °C Mechanical Properties of Ti-Al-Sn-Zr-Mo-Nb-W-Si AlloyInvestigation of the Effect of Modifying the AlSi7Mg0.3 Alloy with a Fast-Cooled Master Alloy Using Heat TreatmentMicrostructure Evolution of AS41 Magnesium Alloy in ECAPEffects of Heat Dissipation from Friction Stir Welding to Microstructures of Semi-Solid Cast 6063 Al AlloyEffect of Pre-Aging on Properties of CuCrSn Alloy during Rolling and AgingEffect of Twice Stablizing Heat Treatment on the Properties of 347H Stainless SteelEffects of Stabilizing Heat Treatment on Properties of Simulated Microstructures in the Heat-Affected Zone of 347H Stainless SteelEffect of Tempering Temperature on Microstructure and Corrosion Resistance of Plastic Mould Steel S136 SUPHydrogen Diffusion Influence on the Stabilizing Phases Behavior in the Ti-6Al-4V AlloyKinematic Viscosity and Electrical Resistivity of a Multicomponent Melt due to Liquid–Liquid Structure TransitionInfluence of High Temperature Annealing on Microstructure Evolution of Ni-24Fe-14Cr-8Mo SuperalloyEffect of Heat Treatment Conditions on Microstructures and Mechanical Properties of Cu-9Ni-6Sn-0.22Nb AlloyLife and Flaking Failure of 13Cr-2Ni-2Mo and SUS440C Stainless Steel Bearings in WaterCasting of Wire Using a Twin Wheel CasterEffect of Cold Rolling on the Microstructure and Mechanical Behaviors of High-Nitrogen and Low-Nickel AlloyStudy on Mechanical Properties of Lost Foam Pattern in MachiningStudy on Microstructure and Properties of Welded Joints with Low Strength Backing Layer for WELDOX960Chapter 2: Polymers and CompositesMeasuring and Testing Composite Materials Used in Aircraft ConstructionExperimental and Modeling Study on High Velocity Penetration of a Carbon/Epoxy Composite LaminateThe Effect of Sintering Profiles on Zirconia Toughened Alumina (ZTA) Prepared by Two-Stage SinteringStudy on Test Methods of Tensile Properties of Continuous Alumina Fiber BundlesThe High-Temperature Tensile Test of Quartz Fiber Fabric- Reinforced Resin CompositesThermoplastique Degradation under Heat and IrradiationExploration of Thermal Degradation Kinetics of Epoxy Resin CompositesEffect of Eggshell Powder Using for an Extender on the Mechanical and Thermal Behaviors of Polylactic Acid CompositesPowder Injection Moulding and Liquid Phase Sintering of Aluminium - SiC Particulate CompositeEffect of Rice Flour Types on the Properties of Nonwoven Pineapple Leaf Fiber and Thermoplastic Rice Starch CompositesImproving Study on Wear Resistance and Mechanical Properties of Graphene / Polyurethane Microfoam CompositesEffect of Short Banana Fiber on Hardness and Tensile Properties of Natural Rubber CompositesMicroscopic Study of Coated Carbon Fibre Reinforced Copper Matrix Composite SamplesInfluence on Tribological Behavior of PEEK Composite Film Layer on PEEK-PTFE Bearings with Artificial Defect in Dry ConditionEffect of Corn Straw Addition on Mechanical Properties of Polyvinyl Alcohol HydrogelA Study on the Mechanical Properties of 3D Printed PLA Specimens According to Infilled Pattern and Printing DirectionExperimental Study of Tool Wear when Milling Tropical Wood with Various Tool MaterialsDistributions of Stress and Interlaminar Shear Stress in Laminates under Normal LoadChapter 3: Materials for Biomedical ApplicationThe Effect of Resin-Based Dental Sealant Containing Vanillin on Biofilm Formation of Candida albicansAnti-Biofilm Formation of an Adhesive Containing Calcium Salts of Acidic Monomers against Oral Candida Related to Root CariesCoating of Polystyrene Surface with REDV-Gelatin Conjugate for Selective Isolation of Endothelial CellsAntibacterial Effect of Gold Nanoparticles Coated Dental Floss against Cariogenic BacteriaAntibacterial Effect of Experimental Orthodontic Adhesives Containing Gold Nanoparticles against Streptococcus mutans and Streptococcus sobrinusThe Effect of Raw Materials on the Properties of Oxidized Cellulose Nanofibers from Bacterial CelluloseA Study on Nano-Flow Control of Bio-Inspired Nanosized Ion ChannelLarge-Scale Synthesis of Glutathione-Coated and 68Ga- Labeled Gold Nanoclusters for PET/CT Imaging of TumorsChapter 4: Ceramics, Functional Materials and Special TechnologiesPreparation of M2SiO4:Tb3+, Mn2+, Nd3+ White-Emitting Phosphors (M = Mg2+, Ca2+, Sr2+, and Ba2+) and the Influence of M2+ Cations on their Luminescent PerformanceEffect of Sulfurization Process on Octahedral Molybdenum Cluster from Mo6 Cluster to MoS2 NanosheetFabrication of YSZ-Carbon Felt Composite Materials by Spark Plasma Sintering ProcessResearch on Control Factors and Performance of YAG Porous CeramicsHydrothermal Fabrication of BiVO4/ Diatomite Composite Photocatalysts and their Photocatalytic PerformanceStructural and Optical Studies of Lithium Doped Barium TitanateStudy on Low Temperature Conduction Mechanism of Al Doped ZnO/SiO2/ P-Si HeterojunctionContact Angle Measurement of Melting SnAgCu Solder Paste Mix with Carbon Allotropes Using In-Line Digital Holography TechniqueAn Experimental Study on Electrosparking of Tool Electrode Forced Cooling Based on Micro Heat Pipe BundleBrazing of Porous Copper Foam with Copper Sheet Using CuNiSnP Amorphous Filler MetalThe Potential Use of Brick Wastes in the Generation of New Materials for Construction through Geopolymerization ProcessesInvestigation the Ultrasonic Vibration on Tin Soldering Welding of Copper Wires and PlatesChapter 5: Materials and Technologies of Environmental Engineering, Waste RecyclingExperimental Study on Biological Treatment of Copper in Acid Mine Drainage after Iron RemovalAn Effect of pH on Radiation Assisted Modification of Oxygen-Rich Activated Carbon by UreaCharacterization of Coal Fly Ash, Bottom Ash and their Possibilities as Catalysts for Biodiesel ProductionSynthesis of Sustainable and High Purity of Quicklime Derived from Calcination of Eggshell Waste in a Laboratory-Scale Rotary FurnaceChapter 6: Building MaterialsStrength Development and Microstructural Investigation of Calcium Carbide Residue and Fly Ash Prepared with Optimized Alternative Green BindersDevelopment of an Alternative Cementitious Materials Based on Calcium Carbide Residue and Silica FumeThermal Insulation Performances of Plaster Composites Based on Embedding Natural Rubber Latex CompoundEffect of Alkali Treatment on the Mechanical Property of Natural Fiber in a Concrete-A Mini ReviewFresh, Durability and Mechanical Behavior of Self Consolidating Concrete Incorporating Fly Ash and Admixture under Hot WeatherDetection of Reclaimed Asphalt Pavement Presence in Asphalt Mixtures Using a Method of Successive Asphalt Binder ExtractionExperimental Evaluation of Moisture Damage and Rutting Resistance for SBS Modified Warm Mix Asphalt Incorporating Recycled Asphalt ConcreteChapter 7: Optimization of Materials Processing Technologies ParametersThe Method of Constructing a Multidimensional Model for Finding the Values of the Parameters of the Incremental Sheet Forming ProcessOptimization of Machining Parameters for Improving Accuracy of Dimension and Shape of Bent Part in Rotary Draw BendingDilution Optimization of Laser Cladding Assisted by Pulsed Current Based on Genetic Algorithm and Neural NetworkChapter 8: Tribology, Corrosion and CoatingsContact-Fatigue Resistance of PM Steel with Hard CoatingsEffect of Sensitization Time on Intergranular Corrosion of 347H Stainless SteelMicrostructural Characteristic and Solid Particle Erosion Behavior of Plasma-Sprayed Ni60/Ni-WC Composite CoatingCorrosion Protection of Nano-Silica Powder Coatingon Artificial SeawaterA Failure Analysis Case of Regeneration Gas Heater Leakage