Materials Joining and Processing by Friction Based Technologies
Heftet /
2021
/ Engelsk
Produktdetaljer
ISBN
9783035718270
Publisert
2021-07-14
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1010 gr
Høyde
240 mm
Bredde
170 mm
Dybde
26 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
524
This book, a revue of some latest trends in the development of friction-based technologies for materials joining and processing, contains articles published by Trans Tech Publications Inc. in the 2019 - 2020 years. The edition will be helpful to a broad audience of researchers and engineers from developing and modernisation of mentioned technologies in mechanical engineering.
Les mer
<p>Aggregated Book</p>
- Preface
- Chapter 1: Friction Welding
- Experimental Analysis of SA213 Tube to SA387 Tube Plate Welding by Using Close Fit Technique in Absence of Supporting Plate
- Microstructures and Mechanical Properties of Friction Welded Steel Tubes
- Metal Joining Technique of SA 213 Tube and SA 387 Tube Plate Grade Materials Using Backing Block by Clearance Fit Condition
- Microstructure Characterization of Superalloy 718 during Dissimilar Rotary Friction Welding
- Welding of Valve Steels of Different-Sized Cross Sections
- Chapter 2: Friction Stir Welding
- General Aspects Concerning Possibilities of Joining by Friction Stir Welding for some of Couples of Materials Usable in the Automotive Industry
- General Considerations Regarding Friction Stir Welding of some Steels Used in Important Industrial Fields
- Considerations on the Ultimate Tensile Strength of Butt Welds of the EN AW 5754 Aluminium Alloy, Made by Friction Stir Welding (FSW)
- Research on the Welding Behavior for Alloy EN AW 5754 when Using FSW-US Hybrid Process
- Study on the Precipitation Behavior of Precipitates of 7075 Aluminum Alloy Friction Stir Welding Joint
- Fatigue Property of Friction Stir Welded Butt Joints for 6156-T6 Aluminum Alloy
- Effect of Weld Zone Shape on Microstructure and Tensile Properties in Friction Stir Welding Process
- Investigations on the Hardness Distribution and Microstructure of Friction-Stir-Welded 6082 Aluminum Alloy
- On FSW Keyhole Removal to Improve Volume Defect Using Pin Less Tool
- Mechanical and Corrosion Behavior of Pure Aluminium Added Friction Stir Weld Joint of Aluminium Alloy
- Evaluation of Microstructure and Mechanical Properties for Friction Stir Welding of Aluminium HE-30 Plates
- Improvement in Mechanical and Metallurgical Properties of Friction Stir Welded 6061-T6 Aluminum Alloys through Cryogenic Treatment
- A Study on Influence of Underwater Friction Stir Welding on Microstructural, Mechanical Properties and Formability in 5052-O Aluminium Alloys
- Studies on Friction Stir Welding of AA2014, AA6082 and AA7075 Simillar and Dissimillar Joints
- Residual Stresses in Similar and Dissimilar Friction Stir Welds of AA5083 and AA6061
- Characterization of Microstructure and Mechanical Properties of AA2219-O and T6 Friction Stir Welds
- Optimization of Process Parameters for Improved Corrosion Resistance and Microstructural Exploration in Friction Stir Welding of AA2024 - AA6061
- Multi Objective Optimization of Joining Dissimilar AA5083& AA6061 Alloys Using Friction Stir Welding- Integrated Taguchi and Grey Systems Approach
- Mechanical Properties Evaluation of Friction Stir Welded AA6061-AA7075 Alloys for Different Tool pin Geometries
- Microstructures and Properties of Friction Stir Welded Al-Cu Lap Joints
- Temperature Influence on Microstructure and Properties Evolution of Friction Stir Welded Al-Mg-Si Alloy
- Joining of Titanium and its Alloys with Aluminum Alloys by Friction Stir Welding
- Characterization and Evaluation of Mechanical Properties and Residual Stress in Aluminum-Magnesium Alloys Welded by the FSW Process
- Investigating the Effect of Friction Stir Welding on Microstructure and Corrosion Behaviour of Al-Zn-Mg Alloy
- Microstructure and Impact Load Performance of Friction Stir Welded Joint of AZ31B Magnesium Alloy
- On the Local Constitutive Behavior of Friction Stir Welded AISI 304 Stainless Steel Joints
- Optimization of Welding Process Parameters in Novel Friction Stir Welding of Polyamide 66 Joints
- Chapter 3: Friction Stir Spot Welding
- The Effect of Rotation Speed and Dwell Time on the Zn Distribution of the Dissimilar Metals Friction Stir Spot Welded between Aluminum Alloy and Galvanized Steel
- Multi-Objective Optimization of Friction Stir Spot Welds of Aluminum Alloy Using Entropy Measurement
- Investigation on Parameter Contribution to the Property of Weld Joint AA5052-H112 Sheets in Friction Stir Spot Welding under Fatigue Load and Failure Mode
- Friction Stir Spot Welding of AA2024-T3 with Modified Refill Technique
- Chapter 4: Friction Stir Processing
- Mechanical Characterization of Aluminium Alloy 6061 Powder Deposit Made by Friction Stir Based Additive Manufacturing
- Surface Smoothing of A5083 Aluminum Alloy Plate by Friction Stir Forming
- Analysis of Friction and Wear Properties of 7075 Aluminum Alloy Modified by FSP
- Effect of Tool Rotation Speed on the Microstructure and Mechanical Properties of Al-12.7 % Si Alloy by Friction Stir Processing
- Effect of Multi Pass Friction Stir Processing on Surface Modification and Properties of Aluminum Alloy 6061
- Stationary Shoulder Friction Stir Processing: Influence of Tool Wear on Surface Properties
- Effect of Friction Stir Forming Process Parameters on Mechanical Interlock between A5083Alloy and Ultra-Thin Stainless Steel Strands
- Effect of Friction Stir Processing Parameters on the Properties of AA7075-T73/Al2O3 Surface Metal Matrix Composite
- The Obtaining Layered Composite Materials that Contain Rare Earth Element
- Optimization of Friction Stir Processing Parameters for the Development of Cu-W Surface Composite
- A Review on the Fabrication of In Situ Metal Matrix Composite during Friction Stir Welding
- Role of Overlap Ratio on the Microstructure of Friction Stir Multiseam Cladded Copper-Stainless Steel Lap Joints
- A Review on Fabrication of Surface Composites on Magnesium Alloys by Friction Stir Processing
- Chapter 5: Tools and Technological Equipment
- Technical Characteristics of the Equipment for Friction Stir Welding (FSW), Depending on the Base Metals
- Method and Technologies Functional Constructive Configuration Concept of a Flexible Unconventional Hybrid FSW-US Welding Process
- A Novel Tool Path Strategy for Modelling Complicated Perpendicular Curved Movements
- Friction Stir Welding in the Aircraft Production
- Utilization of XSYTIN-1 Tool in Electrically-Assisted Friction Stir Welding of Dissimilar Metals - Al 6061-T651 to Mild Steel
- Chapter 6: Analytical and Computational Modelling
- Analytical Modeling and Analysis of the Matter Flow during Friction Stir Welding
- Development of a Friction Welded Joint for Future Industrial Application
- Numerical Simulation of the Effect of Shoulder Rotation on the Tensile Strength of FSW Dissimilar Joints of Aluminum Alloy
- A New Thermal Model in SAE-AISI 1524 Friction Stir Welding
- Analysis of Thermal Processes during Friction Stir Welding of Metals
- Finite Element Simulation of Temperature Field during Friction Surfacing of Al-5Mg Consumable Rod
- Finite Difference Model of Temperature Fields in Linear Friction Welding
- Heat Transfer Simulations and Analysis of Joint Cross-Sectional Microstructure on Friction Stir Welding between Steel and Aluminium
- Preliminary Studies on Molecular Dynamics Simulation of Friction Stir Processing of Aluminium Alloys
Les mer
Produktdetaljer
ISBN
9783035718270
Publisert
2021-07-14
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1010 gr
Høyde
240 mm
Bredde
170 mm
Dybde
26 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
524