Innovation in Testing and Evaluation of Structural Integrity
Heftet /
2017
/ Engelsk
Produktdetaljer
ISBN
9783038357926
Publisert
2017-01-20
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
1080 gr
Høyde
240 mm
Bredde
170 mm
Dybde
28 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
564
This edition is published by results of the 2016 International Symposium on Structural Integrity (ISSI2016, May 26-30, 2016, Tianjin, China). The articles cover a variety of topics associated with testing, evaluation and with provision the structural integrity of machines, machines parts and structures. The publication of the proceedings aims to present the current solutions in the field of the structural integrity research.
Les mer
<p>Selected, peer reviewed papers from the 2016 International Symposium on Structural Integrity (ISSI2016), May 26-30, 2016, Tianjin, China</p>
- Preface, Committees, Sponsors
- Chapter 1: Analysis and Testing of Mechanical Properties of Materials as Element of Assessment of the Structural Integrity
- Study on the Prediction of the Maximum Crack Extension Location for Surface Cracks
- Weight Functions and Stress Intensity Factors for Eccentric through Cracks in a 3-D Rectangular Plate Subjected to In-Plane Loading
- Mode-II Fatigue Crack Growth Model from Shear-Type Low Cycle Fatigue Properties
- Establishment of Unified Correlation of In-Plane and Out-of-Plane Constraints with Ductile Fracture Toughness of Steel
- Effect of Maximum Temperature on the Thermal Fatigue Behavior of Superalloy GH536
- Modification Strain-Based Failure Assessment Diagram for High Strength Pipeline Steel
- A Prediction Model for Mode-III Fatigue Crack Growth
- Effect of Various Side Grooves on 3D Crack-Front J-Integral for CT Specimens
- Interaction between Local Plastic Strain and Multi-Scale Fatigue Crack Propagation Behavior in Titanium Alloy TC4
- Mean Stress and Ratcheting Corrections in Fatigue Life Prediction of Metals
- A Modified Cumulative Damage Model for Fatigue Life Prediction under Variable Amplitude Loadings
- An Empirical Life Prediction Method of Cold-Stretched Austenitic Stainless Steel
- Mechanical Behavior and Fatigue Performance of Carburized Steel Specimens
- Multiaxial Fatigue of 6061-T6 Aluminum Alloy under Corrosive Environment
- The Effects of Nonproportional Loading on the Elastic-Plastic Crack-Tip Fields
- Ductile Crack Growth Modeling under Low Cycle Fatigue Loading Condition
- The Combination of Probabilistic Method and Fracture Mechanics Model in Multiple Cracks Analysis
- A Thermo-Mechanical Constitutive Model of Glassy Shape Memory Polymers
- Study on 3D Edge Crack Extension Simulation in Cold Rolling with the Cohesive Zone Model
- Experimental Studies on Deformation Behaviors of Rubbery Materials under Cyclic Loading
- Ratcheting Simulation of Z2CN18.10 Austenitic Stainless Steel under Pre-Strain Conditions
- A Novel Unified Dislocation-Density Based Model for Hot Deformation Behavior of a Nickel-Based Superalloy
- Research on High Temperature Compression and Creep Properties of Porous Copper Alloy
- Unified Constitutive Modeling towards Enhanced Structural Integrity
- Cohesive Zone Modeling for 3D Ductile Crack Propagation
- A Comparative Study on the Cyclic Behavior of Austenite/Ferrite Phases Characterized by the Nanoindentation
- Three Dimensional Criterion for Creep Crack Propagation in C(T) Specimen
- Long Time High Temperature Stress Rupture Strength Behavior and Structure Stability Study on Ni-Base Superalloy Nimonic 80A
- Microstructural Evolution of Nuclear Power Steel A508-III in the Creep Process at 800°C
- Analysis on the Creep Mechanism of 12Cr-Mo-W-0.25V Steel Based on Long-Term Stress Relaxation Test Data
- Investigation on Creep Behavior of Grade 91 Heat-Resistant Steel at 923K
- Effects of Sensitization and Hydrogen on Stress Corrosion Cracking of 18-8 Type Stainless Steel
- Stability of Residual Stresses in Ultrasonic Surface Deep Rolling Treated Ti-6Al-4V Alloy under Cyclic Loading
- Influence of Plastic Pre-Strain on Low-Temperature Gas Carburization of 316L Austenitic Stainless Steel
- Chapter 2: Analysis and Tests of the Structural Integrity of Machine Parts, Machines and Structures
- Multiaxial Ratcheting Behavior of M5 Zirconium Alloys Tubes in Different Loading History
- Creep Characteristic of Sn1.0Ag0.7Cu Lead-Free Solders with Element Addition
- Study on the Non-Probabilistic Interval Damage of High Temperature Furnace Tube
- Numerical Simulation and Experimental Investigation of Residual Stress in 06Cr19Ni10 Austenitic Stainless Steel Weld Joint with Effects of Strain-Strengthening
- The Mitigation of Weld Residual Stress on 304L Stainless Steel by Post Weld Cool Treatment Process
- Experimental Investigation on the Effect of Arm Length on Accuracy of Torque Wrench
- The Numerical Analysis and Experimental Study of the Stress Intensity Factor and Outer Surface Strain of the Pressure Pipe with Internal Longitudinal-Cracks
- Numerical Investigation on Plastic Strain Correction Factor in Simplified Elastic-Plastic Fatigue Analysis
- Numerical Investigation on Creep Crack Growth of Brazed Joint Using Different Damage Models
- Numerical Analysis of Wheel Cornering Test Incorporating the Stamping Effects
- Fatigue Strength Check of Pressure Swing Adsorber Based on FEM
- Uniaxial Ratcheting and Low-Cycle Fatigue Failure of U75V Rail Steel
- Fracture Toughness of Different Locations in API X80 Pipeline Steel on Low Constraint SENT Specimens
- Thermal-Mechanical Fatigue Behavior of P92 T-Piece Pipe
- Changes of the Fracture Toughness of ZG40Cr25Ni20 Furnace Tube after Service and the Corresponding Change of the Microstructure of the Fracture Surface
- Efficient Analysis of 3D Mixed-Mode Cracks of a Pressure Vessel Based on Schwartz-Neuman Alternating Method
- Peak Load Response of a Concrete Beam in Mixed-Mode Fracture
- Limit Load of Pressurized Cylinder-Nozzle Intersection Using Finite Element Method
- Mismatch Effect on the Mixed Mode Type Creep Crack within Weldment
- Mismatch Constraint Effect for Bimaterial Interfacial Creep Crack
- Quantification of Stress Field for Mixed Mode Creep Crack Considering Mismatch Effect
- Stress Analysis for Clad Steel Tube Sheet with Oval Tube Hole
- Buckling Behaviour of Stainless Steel Square Hollow Sections
- Weld Residual Stress in Tube to Tube Sheet Joints of a Heat Exchanger by Experimental and Finite Element Simulation
- The Study on Degradation of Stainless Steel Clad Plate Used for a Shift Reactor in Coal Chemical Plant
- Numerical Investigation of Stainless Steel Welded I-Sections Subjected to Lateral-Torsional Buckling
- Ratcheting Behavior of Pressurized Elbow Pipe under Different Loading Modes
- Effect of Gasket Compression Resilience on the Tightness of Bolted Flange System
- The Analysis of Bolted Flange Joints under Internal Pressure at High Temperature
- Discussion on the Implementation of the Primary Structure Method in Design by Analysis
- Structural Integrity Analysis of Nuclear Power Plant Pressure Vessel Penetration Nozzle Repaired
- Research on Full-Scale Hydrostatic Burst Testing of Different Pipeline Girth Weld Defects
- Structural Analysis and Optimization of Transition Section of Convex Tube Sheet
- Stress Corrosion Cracking of NiCrMoV Steel Welded Joint under Applied Load in Simulated Environment of Low Pressure Nuclear Steam Turbine
- Creep Fatigue Life Assessment of a Pipe Intersection with Dissimilar Material Joint by Linear Matching Method
- Strain Analysis of Oil and Gas Pipeline with Dents Based on ILI Data
- Stress Analysis for the Orthotropic Pressurized Structure of Cylindrical Shell with Nozzle
- The Significance of Thermo-Mechanical Fabrication on Long Term Creep Life of Type 316H Austenitic Stainless Steel Components
- Characterization of High-Power COB LED Module Attached by Low-Temperature Sintered Nanosilver
- Manufacturing Issues and the Resulting Complexity in Modeling of Additively Manufactured Metallic Microlattices
- Effect of Temperature and Environmental Aging on the Mechanical Reliability of n- and p-Type Thermoelectric Couples
- Semi-Open Thermal Protection Scheme of Electronics in Nuclear Rescue Robot
- Numerical Study on the Influence of Cathode Flow Channel Baffles on PEM Fuel Cell Performance
- Chapter 3: Coatings and Surface Engineering as Elements of the Structural Integrity
- Plasma Sprayed Al2O3-SiCw Coatings Deposited under the Electrostatic Field
- The Influence of Processing Parameters on the Surface Integrity of Ni60A Coatings Fabricated by Laser-High Frequency Induction Hybrid Cladding
- Failure Analysis of the outside Coating on the Furnace Roller
- Measurement of Young’s Modulus of Thermal Barrier Coatings by Suspended Coupled Flexural Resonance Method
- A Comparative Study on the Wear and Corrosion Resistance of Coatings
- Chapter 4: Methods and Practice of Inspection, Monitoring and Assessment of Structural Integrity in Industry
- HAZOP-LOPA-Based Corrosion Risk Identification and Control
- Structural Integrity for the RPV of French NPP during the LRA
- Maximum Likelihood Estimation Modeling of Welded Joints Based on Metal Magnetic Memory Parameters
- Performance Monitoring Analysis of Liquid Ring Vacuum Pumps
- Failure Analysis of the Gray Cast Iron Drain Valve of the Converter Gas Pipe
- Effect of Surface Strengthening on Corrosion Property of Ti-6Al-4V in 3.5% NaCl
- Reliability Assessment of Gas Pipelines with Corrosion Defects Based on In-Line Inspection
- Progressive Failure Analysis of Pipeline Repaired by Composite Wrapping
- Corrosion Diagnosis and Mechanism of Boiler Water-Cooled Wall Tubes in Alkaline Environment
- Strain Monitoring via Self-Assembled Quantum Dots
- Failure Assessment of the First Stage High Pressure Turbine Blades
- Comparative Study on the Application of Two RBI Methods on Pipelines
- QDs-Epoxy Resin for Strain Monitoring
- Finite Element Analysis and Research on Corrosion Defect of Tank Floor
- Simulation of Alloy Content Assessment in Fe-Si Alloy Steel by Eddy Current Testing
- Fitness for Purpose Assessment of Girth Weld Defect Based on In-Line Inspection
- Failure Analysis of Injection Pipe in Diesel-Hydrogenated Unit
- Development of Bending and Torsion Fatigue Testing Machine for Multiaxial Non-Proportional Loading
Les mer
Produktdetaljer
ISBN
9783038357926
Publisert
2017-01-20
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
1080 gr
Høyde
240 mm
Bredde
170 mm
Dybde
28 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
564