Produktdetaljer
ISBN
9780878497805
Publisert
1997-10-06
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
2880 gr
Høyde
240 mm
Bredde
170 mm
Dybde
63 mm
Aldersnivå
UU, UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This 2-vol. set covers a broad range of areas related to the fracture of materials, including fracture mechanics, dynamic fracture, fatigue, creep, environmental effects, damage mechanics, analytical and computational mechanics, reliability and failure analysis, and materials behavior.
Les mer
<p>Proceedings of the Third International Conference on Fracture and Strength of Solids, Hong Kong, December, 1997</p>
- Effect of Mutual Coupling Action between K1 and K3 on Fracture Toughness of Materials in a Mixed Mode Fracture
- Compliance Controlled Stress Intensity Factor Changes in Rivetted Repairs
- Study on the J-Integral Failure Assessment Curve of Heterogeneous Welded Joints
- Mode I and Mode II Plane-Stress Near-Tip Fields for Cracks in Materials with Strain-Gradient Effects
- Interacting Circular Inhomogeneities
- Effect of Material Character on Fundamental Solutions for Three Dimensional Transversely Isotropic Media
- On J Integral as Fracture Parameter in Heterogeneous Welded Joints
- Evaluation of T Stress for a Finite Internally Cracked Plate by Using EEVM Method
- On Several Problems of Macro / Micro Failure Mechanics
- Effect of a Circular Inclusion on Crack Propagation Path in a Plate under Tension
- Bifurcation in Growth Patterns for Arrays of Parallel Griffith, Edge and Sliding Cracks
- Analysis of Newly Defined Stress Intensity Factors at the End of Rectangular and Cylindrical Inclusions
- A Method for Calculating T-Stress in Mixed Mode Problems
- J2-Integral and its Application in Estimates of Stress Intensity Factors
- Elastic-Plastic Stress Singularity Near the Tip of V-Notch
- Stress Intensity Factor Equation for Center Cracked Tension (CCT) Specimens of Fiber Reinforced Metal Laminates under Cyclic Loading
- Fractal Dimension of Fracture Surface Profiles in an Austenite Steel Fatigued by Repeated Bending
- Dislocation Emission and Cleavage Process at Crack Tip
- Molecular Dynamics Simulation of Hydrogen Enhancing Dislocation Emission
- Investigation of Atomic Structure Ahead of Crack Tip by STM and AFM
- Fundamentals of Mode III Fracture: A Discrete Dislocation Simulation Approach
- Fractal Description of Fractured Surfaces in Materials
- Crevice Formation in Thin Plates by Stress Driven Mass Rearrangement
- Emission of an Edge Dislocation from a Thin-Film-Covered Crack
- Vibration of Cracked Kirchhoff's Plates
- Analysis of Breathing Cracks Using a Cracked Beam Element
- A Numerical Simulation of the Crack Growth in a Smooth CT Specimen
- Introduction to Composite Element Method for Structural Analysis in Engineering
- Development of Hybrid Finite Elements for Stress Analysis of Composite Structures
- Meshless Method on Massively Parallel Processors with Application to Fracture Mechanics
- A Finite Element Analysis on Isotropic Damage Propagation in Axisymmetric Structures
- Effect of Shape and Arrangement of Inclusions on the Elastic Modulus of Composite Materials
- Shape Optimization Analysis for Frequency Response Problems of Solids with Proportional Viscous Damping
- Micromechanical Modelling of Deformation Mechanisms for Rubber-Toughened Polymers
- Finite Element Analysis of Porous Materials Fracture Toughness
- Prediction of the Effect of Craze Damage on Apparent Elastic Properties of Polystyrene by FEM
- Steady State Analysis for Dynamic Crack Propagation in Gas Pipelines
- Dynamic Fracture Characteristics of Metallic Materials under Impact Loading
- The Transition Method of Geometrically Similar Element for Dynamic Crack Problem
- Dynamic Fracture Feature in Metals under Very High Strain Rate Induced by Shock Loading
- Effects on Material Dynamic Initiation Toughness
- On the Dynamic Ductilc Damage and Fragmentation in Porous Metallic Materials
- Hyperelastic Modeling of Dynamic Crack Tip Instabilities
- Transient Response of a Finite Plate with Multiple Cracks
- Theory of Caustics for Mode-III Unsteadily Fast Propagating Cracks
- Determination of Impact Shear Strength of Adhesive Joints with the Split Hopkins Bar
- Boundary Element Methods for Crack Dynamics
- Slip Bands and Fatigue Life of a Steel under Repeated Impact Tension
- Dynamically Propagating Crack in Graded Particle Dispersed Composite Modeled by Neuro-Fuzzy Inference
- A Very High Strain Rate Compression Test Using a Modified Split Hopkinson Pressure Bar Technique
- Analysis of Impact Fracture Behavior of Laminated Glass of Bi-Layer Type Using Discrete Element Method
- Modelling of Dynamic Behaviour of Elastic-Plastic Structures under Impact
- Higher Order Solutions of the Near-Tip Fields for a Rigid Flat Inclusion in a Damaged Nonlinear Material
- A Method of Damage Mechanics Analysis for Solder Material
- Some Advances in Study of Crack Identification Problems
- Interacting Multiple Cracks
- A Geometrical Description in Finite Elasto-Plastic Deformation
- Artificial Neural Network Assessment System for Fatigue Life
- Analysis of Damage Moments in the Collective Evolution of Short Fatigue Cracks
- Crack Identification by Artificial Neural Network
- Dynamic Function of Damage and Its Implications
- An Interface for Implicit Constitutive Modelling
- Estimation of Bending Strength of CFRP Cross-Ply Laminates from Damping Capacity Using by Neural Network
- A Method of Damage Mechanics for the Prediction of Fatigue Lives
- Neural Network Based Inverse Analysis for Defect Identification with Laser Ultrasonics
- Prediction of Fracture Limits of Sheet Metals by Using a Damage Mechanics Criterion
- Damage Evolution and Energy Dissipation in the Crazing of Polymers
- Influence of Fiber/Matrix Interface Properties on Complementary Energy and Composite Damage Tolerance
- The Effect of Interface Damage on the Microbuckling of Unidirectional Fiber-Reinforced Composites
- Closed-Form Interacting Solutions for Overall Elastic Moduli of Composite Materials with Multi-Phase Inclusions, Holes and Microcracks
- On the Modeling of Interfacial Zone Containing a Griffith Crack: Plane Problem
- Singular Integral Equation Approach to Push-In Tests in Fiber-Reinforced Composites
- Influence of Interfacial Debonding on the Elastic Property of a Particle-Reinforced Composites
- A Tensile Strength Model for AVCO Mod 3a C/C Composite
- An Analysis of a Crack Normal to Bimaterial Interface Using Cubic Isoparametric Finite Elements
- Application of Shear Lag Analysis to Tensile Behaviour of Fiber-Composites
- The Singularity of Stress Field Near the Axisymmetric Interface End of Push-In Test Specimen of Composites
- Damage Tolerance of Adhesively Bonded Composites Single Lap Joints
- Analytical Techniques for Bonded Repairs
- A 4-Cylinder Model to Evaluate Interfacial Properties of Fibre-Reinforced Composites
- Evaluation of Interfacial Bonding Strength of Films
- An Application of Conservation Integrals to Elastic T-Stresses of Interface Crack
- Intensity of Singular Stress Field at the Interface Edge Point of a Bonded Beam
- Elastoplastic Constitutive Law for Particle Dispersed Composite Material Accounting for Mesoscopic Inhomogeneity
- Stress Intensity Factors of Three-Dimensional Interface Crack under Mixed-Mode Loading by Finite Element Analysis
- An Analysis of Singularity in Single Fibre Pull-Out Test Using BEM
- Computational Modeling and Analysis of a Center-Cracked Panel Repaired by Bonded Composite Patch
- Tensile Failure of Short Fiber-Reinforced Composites
- Finite Element Analysis of Stress Distributions in a Fibre/Matrix Fragment
- Theoretical Consideration on Cavity Growth Process under Creep-Fatigue Condition
- Incorporating the Effect of Stress-Free Thermal Ageing into Creep Damage Models
- Fatigue Crack Growth in 316L Stainless Steel
- Analysis of Crack Closure by Different Measurement Methods
- Prediction of Fatigue Life of MIG Welded Cruciform Joints Failing from the Root LOP Region
- Damage Analysis of High Temperature Isothermal and Thermomechanical Fatigue on a TZM Alloy
- Cyclic Creep Behavior of SiCw/6061Al Composites at High Temperatures
- Correlations Among Curves Equations and Materials Parameters in the Whole Process on Fatigue-Damage-Fracture of Components
- Characteristics and Miromechanism of Low Cycle Fatigue under Non-Proportional Loading for 316L Stainless Steel
- Fatigue Properties of Self-Fusing-Alloy-Sprayed Steel
- Evaluation of Fatigue Life in Microelectronics Solder Joints of a Surface-Mounted Type
- A Study on Fatigue Crack Growth Behavior of Aged Stainless Steel at Elevated Temperatures
- Analysis of Fatigue Crack Closure Behavior for Various Cracked Geometries
- Evaluation of Cumulative Fatigue Lives under Different Biaxial Loading Mode Sequences for Notched Specimens
- Fatigue Damage Repair by Artificial Introduction of Crack Closure
- Creep Behavior and Rupture Life of Short Fiber Reinforced Metal Matrix Composites
- Fatigue Crack Propagation in Titanium Single Crystals
- Unidirectional Carbon Fibre/Epoxy Laminates Interleaved by Film Adhesives and Chopped Kevlar Fibres
- Load History Effects on Composites Laminates and Composite Repairs
- Fracture Behavior of ABS Resin under Mixed Mode Loading
- Advanced Composites for Medical Applications
- Mode II Fracture Behaviour of PBT Modified Brittle Epoxies
- Improvement of Mechanical Properties of Materials by Biomimetic Treatment
- Effects of Thermal Cycling on Microscopic Damage Progress in Laminated Composites
- Static Mechanical Behavior of Bamboo/Aluminum Composites for Applications in Industrial Structures
- Effect of Blending Sequence on the Impact Strength of PET/PC Blends
- Impact Strength and Failure Mechanisms of PBT/PC Blends
- Interlaminar Properties of Glass Woven Fabric Composites: Mode I and Mode II Fracture
- Interface Modification of PC/LCP in Situ Composites and its Influence of Impact Strength
- Interphase Morphology and Fibre Pull-Out Behaviour of Carbon Fibre PEEK Composites
- A Study of the Elastic Storage Moduli of Glass Bead Filled LDPE Composites
- Mechanical Properties of Glass Beads Filled Polypropylene Composites
- Effects of Cyclic Thermal Loadings on Fatigue Behavior of Carbon/PEEK Laminates
- Fatigue Crack Growth in Carbon Fiber Filled PEEK under Mixed Mode Conditions
- Stretch Strength of Al-Li Alloy Sheet
- Method for Determination of the Strain Hardening Law and for Analysis of Early Fracture Stages of Some Structural Components
- An IFS Constitutive Description of the Fractal Microcrack Evolution for SiCp Reinforced Al Alloy Matrix Composite in Large Plastic Deformation
- Development of New Welding Pattern in Order to Minimise Distortions in Marine Structure
- Effect of Thermo-Mechanical Conditioning Cycle on Retardation of Crack Growth in Cylinders Manufactured from an Aluminium Alloy
- Effects of Orientation and Loading Mode on Short Fatigue Crack Growth in Ni3Al Alloy Single Crystals
- Mechanical Behavior of Two-Dimensional Carbon Fiber Fabrics Reinforced Carbon Matrix Composites
- A Study on Deformation Behaviour of Ultrafine Grained Materials
- Effect of Microstructure and Several Parameters on Ji and δi
- Evaluation of the Interaction Effects of SiC Partlcles During Damage Process of MMC
- Fracture and Damage at Interfaces of Ceramic Laminates
- Division and Delamination Processes of WC+Co Film Coated by High-Velocity Flame Spraying
- An Inverse Analysis Approach to Identify the Elastic-Plastic Material Properties of Al-Based Functionally Graded Materials
- Oxidation Behavior of Si-Ti-C-O Fiber-Bonded-Ceramics
- Simulation of Crack Propagation with Microcracking in Al2O3 Particle-Dispersed SiC Composites
- Mechanical Properties of a NiTi-Based Smart Composite
- Experimental Study on Dynamic Crack Propagation of Steel Fiber Reinforced Concrete
- Fracture Systems Caused by Mechanical Indentation in Medium or Hard Rocks
- Computational Estimation of Tensile Strength of Lightweight Concrete and its Application to Material Design
- Peak Strength of Replicated and Real Rocks Containing Cracks
- Nondestructive Evaluation of Cracks and Elastic Constants of Concrete Using Transient Elastic Waves
- Tensile Strain Hardening Behavior of Cementitious Composites Reinforced with Short Steel Fibres
- Electroelastic Analysis of a Partially Debonded Inhomogeneity in Piezoelectric Materials
- A Nonlinear Constitutive Theory for Ferroelectrics
- A Constitutive Theory for Ferroeletric Ceramics
- Fracture, Fatigue and Domain-Switch of Ferroelectrics under Electric and Mechanical Loading
- On Multiple Circular Piezoelectric Inclusions Embedded in an Intelligent Material
- Electromechanical Response of Cracks in Piezoelectric Materials under Combined Mechanical and Electrical Loadings
- Mechanical Properties Analysis of Piezoelectric Smart Structures
- Energy Release Rate for a Crack or a Cavity in a Piezoelectric Material
- Environmental Embrittlement of a Ni-22.6Al(at%) Intermetallics
- Effects of Stress Concentration Factors on Corrosion Fatigue Strength of a Steel Plate for Ship Structures
- Retrogression and Reaging Revisited
- In Situ TEM Observations of Liquid Metal Embrittlement of Al Single Crystals in HG + 3 atm% Ga
- Investigtion of Tensile Stress Induced by Oxide Film During Corrosion Process for α-Ti
- Analysis and Design of Pressure Washer Drums for Pulp and Paper Industry
- Several Issues Concerning Reliability Assurance of Equipment for Nuclear Power Plants
- Estimations of Total Life in Whole Fatigue-Damage-Fracture Process of Structures and their Components under Many-Stage Loading Conditions
- Adjustable Real-Time Interval Digital Shearography and its Applications
- Applications of Long Distance Microscope (LDM) in the Testing of Fracture Mechanics
- A Study on the Development of Photoelastic Experimental Hybrid Method for Fracture Mechanics
- Methodology and Illustrations for Material Design against Fractures
- Self-Organization of Mechanical Structure by Cellular Automata
- Experimental Measurement of Fast Branching Cracks
- Thermal Stress Analysis of a PQFP Moulding Process: Comparison of Viscoelastic and Elastic Models
- Effects of Temperature Profile on the Life Prediction of PBGA Solder Joints under Thermal Cycling
- Detection and Characterization of Cracks and Corrosion in Aging Aircraft Structures (Part 1)
- Detection and Characterization of Cracks and Corrosion in Aging Aircraft Structures (Part 2)
- Evolution of Orientation Hardening in the Cold Rolling of an AA3003 Aluminium Alloy Sheet
- Mode III Crack in the Piezoelectric Layer of Two Dissimilar Materials
- Strengthening of Wire Electro-Discharge Machined SiAlON Ceramic by Quenching
Les mer
Produktdetaljer
ISBN
9780878497805
Publisert
1997-10-06
Utgiver
Vendor
Trans Tech Publications Ltd
Vekt
2880 gr
Høyde
240 mm
Bredde
170 mm
Dybde
63 mm
Aldersnivå
UU, UP, P, 05, 06
Språk
Product language
Engelsk
Format
Product format
Heftet