Collection of selected, peer reviewed papers from the 2014 5th International Conference on Advances in Materials and Manufacturing, (ICAMMP 2014), December 20-21, 2014, Fuzhou, China.
The 168 papers are grouped as follows:
Chapter 1: Designing and Dynamic Analysis of Machines and Mechanical Structures;
Chapter 2: Mechanical Strength and Reliability;
Chapter 3: Practice of Computer-Aided Designing and Modeling;
Chapter 4: Measurements, Testing and Diagnosis, Processing of Image and Data;
Chapter 5: Vibration and Noise in Engineering;
Chapter 6: Thermal Conductivity and Thermal Analysis;
Chapter 7: Engineering Machinery and Equipment;
Chapter 8: Mechatronics, Industrial Robotics, Automation and Control Technology;
Chapter 9: Advanced Numerical Control (NC) Technologies and Equipments;
Chapter 10: Organization of the Production, Product Design, Production Planning and Scheduling

Les mer
<p>Selected, peer reviewed papers from the 2014 5th International Conference on Advances in Materials and Manufacturing, (ICAMMP 2014), December 20-21, 2014, Fuzhou, China</p>
  • Preface and Committee
  • Chapter 1: Designing and Dynamic Analysis of Machines and Mechanical Structures
  • Design of the Clamping Mechanism on Welding Equipment in Hot Chamber
  • Design and Research of Vortex-Tube-Ice-Storage System Used in Refuge Chamber
  • Design and Simulation Analysis of Ultrasonic Rolling Horn
  • Design of Intelligent Garbage Can
  • Design of the Blades of Small Horizontal Axis Wind Turbines
  • Designing Requirement of Spring and MR Damper for New Type Baby Car Seat
  • Dynamic Response Analysis of Mistuned Space Flexible Mechanism
  • Dynamic Studies on the Recurve Bow
  • Green Manufacturing Environment of Straw Packaging Container Extrusion Mechanism Design
  • On Adaptable Design for SCARA Manipulator with Quick-Replaceable Arms
  • Optimization Research of the Developing Machine Structure Based on Fluent
  • Parameters Optimization of PVB Laminated Glass Based on Pedestrian Head Protection
  • Preliminary Research on Connecting Strategy between Back-Up Structure and Alidade for 110-m QitTai Radio Telescope
  • Research on Carrot Automatic Sorting Machine
  • Research on Innovation Design of Air Filter Mould Based on Field-Substance Analysis
  • Structure Analysis of Toss Feeding Stalk Baler
  • The Designation of a New Kind of Green Streetcar Based on Virtual Tracks and Key Technologies
  • The Failure Analysis and the Innovative Design of Hammer Head on Hammer Crusher Based on TRIZ Theory
  • Calculation and Analysis on Drag Torque of the Wet Clutch
  • The Variable Cross-Section Rotary Dynamic Seal and its Application
  • Design and Simulation of New Tooth Profile of Flexspline for Harmonic Gear Drive
  • The Forced Vibration Analysis of Beams Based on a Time-Domain Differential Quadrature Method
  • Chapter 2: Mechanical Strength and Reliability
  • An Analytical Study of the Structural Integrity of an LPG Storage Tank under Wind Load
  • Elastoplastic Analysis and Optimization Design for the Tube Channel End of Screw Lock Closure Type Heat Exchanger
  • Fatigue Life Prediction of the Rocket Engine’s Pipeline under Random Loads
  • Hoist Sheave Structure Optimization and Lightweight
  • Influence of Side-Pressure Coefficient on Deformation of Tunnel Surrounding Rock and Bolt Axial Force
  • Mechanical Analysis and Experimental Research of Working in the Earth Helical Blade
  • Model of a Constructive Fuctional Optimization of the Cardan Cross
  • Research on the Influence of Tension and Compressive Fatigue Load on the Corrosion Coefficient of Parking on the Ground
  • Six-Axis Folding Frame Structure Design and Research
  • The Crankshaft Strength Checking Simulation Based on ANSYS
  • The Modal Analysis of Herringbone Gear Assembly
  • The Strength Analysis of Pre-Tightening Force on Covering Pipe-Ear
  • Performance Study for T-Stub Considering the Bending Capacity of Bolt
  • Cutting Roof Roadway Parameter Optimization Simulation Analysis
  • Failure Prediction and Wear State Evaluation of Power Shift Steering Transmission
  • Chapter 3: Practice of Computer-Aided Designing and Modeling
  • Optimal Design of Runner for Shell of Mobile Telephone Based on Moldflow Software
  • A Parallel Simulating System for Calculating Illumination Distribution of Plant Canopy
  • A Study of Reverse Engineering Based on 3DSS Data Acquisition
  • Adaptive Denoising Algorithm for Scanning Beam Points Based on Angle Thresholds
  • Applicability of Virtual Reality in the Study of Environmental Stress
  • Design and Simulation of Injection Mold for the Digital Camera Shell Based on Moldflow
  • Finite Element Analysis of Automobile Drive Axle Housing Based on ANSYS
  • Machining Simulation for Centrifugal Impeller Based on Modelling of Five-Axis Machining Center
  • Numerical Simulation of the Influence of Gear Rotation Speed on the Gear Pump Flow Field
  • Registration Algorithm for Three-Dimensional Point Cloud Data
  • Research on the Optimization of Spring System Based on Virtual Prototyping
  • The Computer Room Modeling and Data Display Based on Three Dimensional Visualization
  • The Construction of Finite Element Model of Invisible Appliance of Inhomogeneous Thickness by Reverse Engineering Technology
  • The Design of Curler for Irregular Metal Lid Based on Pro/E
  • The Study on Finite Element Method for Mechanism Balance Calculation
  • Verification and Validation for Model-Based Design
  • Rapid Research and Design Parameterization of Outdoor Double Intelligent Cabinet
  • Simulation Analysis of a Kind of Sewing Machine Needle and Pick Line Mechanism Based on ADAMS
  • Design of Seven-Speed AT Scheme Based on the Romaxdesigner
  • The Statistical Catastrophe Theory and Optimal Probability Based Design
  • Chapter 4: Measurements, Testing and Diagnosis, Processing of Image and Data
  • Design and Simulation of Thermopile Sensor Technology Based on Porous Silicon
  • Fault Diagnosis with Mult-Signal Test for Reciprocating Compressor
  • The Design of Automobile Wheel Hub Runout Online Detection System
  • The Determination of Thermocouples Optimum Number in the Blast Furnace Hearth for Control of its Condition
  • Multi-Sensor Intelligent Monitoring of High-Speed Grinding for Brittle and Hard Materials
  • The Method of Dynamic Measurement in Light Distribution Performance Test
  • Research and Development of Machine Vision Detection System for Transparent Paper Package
  • Early Visualization Detection of Gray Mold (Botrytis) on Eggplant Leaves Based on Multi-Spectral Image
  • Design of the Elevator Wireless Monitoring System Based on LabVIEW
  • A High-Sensitivity Micromechanical Silicon Resonant Accelerometer without Mechanical Coupling
  • Identification of Transformer Inrush Current Based on Wavelet Packet Energy Spectrum
  • A close to Real-Time Intelligent System for Enumerating Total Viable Bacteria Based on Pattern Recognition Technology
  • Design of the Automatic Diagnostician System Based on Palm Images
  • The Detection Method of Lane Line Based on the Improved Otsu Threshold Segmentation
  • Cooperative Artificial Fish Swarm Optimization
  • A Research on the Real-Time 3-D Imaging Technology and Multi-View Control Interface Design for the Attitude Motion Simulator
  • Image Restoration Based on Pulse Coupled Neural Network
  • Particle Filtering Algorithm Based on Dynamic Multi-Feature Fusion
  • Research on the Harris Algorithm of Feature Extraction for Moving Targets in the Video
  • Segmentation Algorithm of Three-Dimensional Point Cloud Data Based on Region Growing
  • Routing Algorithm in Wireless Sensor Networks Based on Multi-Optimization Function
  • Chapter 5: Vibration and Noise in Engineering
  • Application of Kriging Surrogate Model in Performance Parameters Optimization of Excavator Cab Shock Absorbers
  • Automotive Air Conditioning Compressor Noise Source Identification Method
  • Experimental Study on the Noise of Turbocharger
  • Isolation Performance Analysis of a Porous Material Vibration Isolator
  • Modeling and Simulation Analysis of Five Times Frequency Flutter of Rolling Mill
  • Non-Linear Bearing Force of the Bearing and its Influence on Vibration of Spindle-Bearing System
  • The Engine Assembly Rules of Each Mode of Vibration Analysis
  • The Research of Noise Characteristics on Shenzhen Metro Platform
  • To Research on Damping Performance of Dissipation Structure for Additional Metal Damper
  • Vibration Response Analysis on Spindle System of Milling Machine
  • Chapter 6: Thermal Conductivity and Thermal Analysis
  • Analysis of Thermal Effect on Elastohydrodynamic Lubrication in Angular Contact Ball Bearing
  • Infinite Cylinder Lumped Parameter Analysis Method of Unsteady-State Conduction
  • Research of Optimization Technology for the Thermal Circulation of a Vehicle
  • Turbulent Convective Heat Transfer in a Transversely Grooved Tube with Natural Convection Effect
  • Chapter 7: Engineering Machinery and Equipment
  • Experimental Study on Mixing Performance of HWT-15 Mixer
  • A Modeling Research of Wind Tunnel Test Based on ADAMS with Rigid and Flexible Body
  • Accuracy Investigation of Active Flow Control Using Synthetic Jets
  • An Investigation of the Vortex in a Submersible Axial Flow Pump Impeller
  • Based Fluent Study of Rotary Stream for Sand Reclamation Equipment
  • Design of Hydraulic Loading System for the Little Loading Bearing Testing Machine
  • Design of Platform for Hydraulic Manipulator Virtual Reality Interactive and Comprehensive Experiment
  • Energy-Efficient Technology Supply Bulk Materials
  • Flow Characteristics of Tip Clearance in Axial Compressor
  • Full 3-D Unsteady Numerical Simulation of Control Stage in Partial Admission Turbine
  • Influence of the Distribution of Dual Cascades on Double Vanes Based on the Solid-Liquid Two-Phase Flow
  • Kinematic Analysis of Swash Plate Axial Piston Pump Based on Adams Simulation
  • Loss Calculation and Software Design Based on the Combination of Electric Circuit and Electromagnetic Field Solution in High Speed Permanent Magnet Machine
  • Modeling of Operation Function of the Unmanned Excavator in the Deterministic Surfacing Process
  • Numerical Analysis of Erosive Wear on the Guide Vanes of a Francis Turbine
  • Numerical Simulation on the Temperature Characteristics of Indirect Air Cooling System
  • Reliability and Efficiency Calculation for Drive System of Multi-Bush Roller Ironing Machine
  • Research of Working Mode Conversion Based on GDI Engine
  • Research on Steering Safety Strategy of Electric Forklift
  • Research on Wind Turbine Airfoils Aerodynamic Performance of Trailing Edge Modification
  • Scheme Based on Economic Analysis of Energy Consumption about Lithium-Electric Excavator Hydraulic System
  • Structure Design of Swirl Flow Tool in the Natural Gas Well
  • Study on Hydraulic Fracturing Method for In Situ Stress Measurement in Deep Boreholes
  • Study on Mathematical Model in Working Process of Automotive Air Conditioning Scroll Compressor
  • Study on Pepper Decorticating Technology and Equipment
  • Study on the Large Range Torque Transmitter Quickly Assembled Used for the Calibration of Hydraulic Tongs
  • The Cutter Head Drive Theoretical Model of a New Multi Dual-Eccentric Axes Tunneling Shield Driven by Hydraulic Cylinders Directly
  • Decision and Optimization for Preventive Replacement Contents of Ship Equipment with Multistate System
  • Field Tests on the Application of Oscillation Tool with a Fluidic Amplifier to Directional Well Drilling
  • Arc-Fencing Plane-Iron's Safety Protection Device in MQ44 Multipurpose Woodworking Machine Tool
  • Kinematics Simulation of Shaper Quick-Return Mechanism
  • A Circular Phase Shifting Transformer for Multi-Pulse Rectifier
  • Chapter 8: Mechatronics, Industrial Robotics, Automation and Control Technology
  • Resource Efficient Architecture for Current Control Loop of Two PMSMs
  • A RFID-Based Security Authentication System Model for Electric Vehicle Charging Station
  • A Spherical Planning Based Electrifying Strategy of Permanent Magnet Spherical Motor
  • Analysis about the Work Space of a 3-RPR Parallel Mechanism Based Wind Tunnel Experiment Platform
  • Application of AC Chopping Voltage Controller in Coiling Coater
  • Application of the Sliding Mode Control Approach Based on Double Power Exponential Reaching Law for the Hydraulic Servo System
  • Battery Fast Charging Technology Based on Fuzzy Control
  • Cogging Force Analysis of Moving Magnet Type Permanent Magnet Synchronous Linear Servo Motor
  • Design and Structural Analysis of Robot Arm for High Performance Packaging Robots
  • Design of a Locomotion Control System for Live Working Robot
  • Information Security Protection Design of Electric Vehicles Charging Station
  • Inverse Kinematics Analysis of a 2-Dof Spherical Parallel Shift Manipulator
  • Kinematic Analysis of 4-UPU Parallel Mechanism Based on Influence Coefficient
  • Monocular Camera Calibration Method for Robot System
  • Research on Disparity Map Generation Method of Underwater Target Based on the Improved SIFT Algorithm
  • Simulation Analysis for the Walking Mechanism of the Underground Exploration Robot Based on MATLAB and ADAMS
  • Size-Sorting and Measurement System of Safety Belt Pin Based on Machine Vision
  • Study of the Two-Phase Operation Mechanism of Three-Phase Motors Based on LC Phase Shifting Method
  • Multivariable Decoupling Control Based on TC Control in the Diving and Floating Process of AUV
  • The Research of Coconut Shell Crusher
  • Single Stand Reversing Mill Steel Belt Running Deviation System Analysis and Simulation
  • A Variable Universe Self-Tuning Fuzzy-PI Speed Controller for Induction Motor with DTC-SVM
  • Research and Design of Large Equipment Electromagnetic Compatibility System
  • Design and Implementation of Underground Locomotive Collision Avoidance System
  • The Study of Wide-Format Digital Inkjet Printers’ Carriage Control Method with Double-Carriage
  • Chapter 9: Advanced Numerical Control (NC) Technologies and Equipments
  • 3D Printing Technology Enhances Small Enterprises Improvement Opportunities
  • A Reliability Analysis of NC Machine Tools Based on the Weibull Distribution
  • Control System for Automatic Surface CNC Machining
  • Dynamic Analysis and Optimization of WEDM Based on AWE and LMS
  • Path-Planning of Laser Quenching of 5-Axis Laser Machine Tool
  • Plate Cutting NC Machining Simulation System Based on OpenGL
  • Study on Thermal Error Measurement Model of Small Precision Machine Tools
  • Chapter 10: Organization of the Production, Product Design, Production Planning and Scheduling
  • A Weighted Optimization Allocation Based on Interval Distribution of Equipment Testability Indicators
  • The Optimization of Costs of Supply Chain Network
  • Research Based on Reverse Engineering Technology of Complex Structure Product
  • The Application of Genetic Algorithm in Valve Spring Optimization Design of Internal Combustion Engine
  • Using the Trends of Evolution (TEs) from the Theory of Inventive Problem Solving (TRIZ) to Generate New Product Ideas for Optical Fiber Distribution Boxes
  • Applying Form Elements Extracted from Brand Mark Design to Auto Body Design
  • Rules for Problem Solving: Qualitative Analysis and Compilation of Existing Inventive Heuristics of TRIZ
  • The Simulation and Optimization on the Certain Type Fuel Pump Assembly Line Balance Based on Flexsim
  • A Review of Sufficient Schedulability Analysis for Fixed Priority Scheduling Systems
  • Multi-Objective Optimization Algorithm for Job Shop Scheduling Problem in Discrete Manufacturing Enterprise
  • Research on MES of Iron District Based on the Short Process of Iron-Steel Interface
  • The Research and Application on Advanced Hot Rolling Scheduling System
Les mer

Produktdetaljer

ISBN
9783038354215
Publisert
2015-04-23
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
1630 gr
Høyde
240 mm
Bredde
170 mm
Dybde
47 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
936