ICMMPE

Selected, peer reviewed papers from the 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering, November 23-24, 2016, Petaling Jaya, Malaysia

• Preface, Committees
• Chapter 1: Advances in Material Sciences
• Formation of Nano-Scale FeCO₃ Protective Corrosion Product in Carbon Dioxide-Saturated 3% Sodium Chloride Solution
• Dry Sliding Wear Behavior of the Reinforced by Graphite Particle and Heat Treated of Recycled Aluminum AA6061 Based MMC Fabricated by Powder Metallurgy Method
• Environmental Effect on Short-Beam Composite under Three-Point Bending Test
• Effect of Shot Blasting on Paste Boronizing of 316L Stainless Steel
• Material Characterization of Hybrid Composite: Experimental Using Strain Gauge/DIC with Finite Element Modelling Macro/Micro Scale
• Synergistic Effects of Titanium Dioxide and Zinc Borate on Thermal Degradation and Water Resistance of Epoxy Based Intumescent Fire Retardant Coatings
• The Influence of Holmium on the Microstructure and Hardness of Mg-Nd-Gd-Zn-Zr Alloys
• Effect of Pack Boronizing on Microstructure and Microhardness of 304 Stainless Steel
• Sintering Behaviour of Cemented Tungsten Carbide and Steel Bilayer
• The Effects on Microstructure and Hardness of 0.28% Vanadium and 0.87% Nickel Alloyed Ductile Iron after Boronizing Process
• The Effect of Surface Treatment on 0.16% Chromium and 1.32% Nickel Alloyed Ductile Iron (Di) through Boronizing Process
• Weighting of Natural Fibre Criteria for Fibre Metal Laminate Using Entropy Method for Car Front Hood Utilization
• Effect of Yttrium Addition on Microstructure and Hardness of Cast EV31A Magnesium Alloy
• Study on Temperature Distribution to Enhance the Mould Cooling Method Used in Vacuum Forming Applications
• Effect of Soaking Time on Paste Carburizing of Carburized Low Carbon Steel
• The Comparison on Mechanical Bonding Properties of Untreated Coconut Fiber towards Synthetic Fiber for Fiberglass Boat Building
• Chapter 2: Mechanical Machining Technologies
• Critical Thrust Force for On-Set Delamination of Hybrid FRP Composite during Drilling Process
• Machinability Study of Hybrid FRP Composite Using Abrasive Waterjet Trimming Technology
• Experimental Investigations into the Effect of Process Parameters and Nano-Powder (Fe₂O₃) on Material Removal Rate during Micro-EDM of Co-Cr-Mo
• Effects of Cutting Speed, Cutting Fluid, and Carbon Fiber Orientation on Cutting of CFRP during Turning
• Fundamental Research on Hobbing and Finish-Hobbing in Dry and with MQL System
• Investigation of Heat Assisted High Speed End Milling of Soda Lime Glass for Surface Generation
• Chapter 3: Technologies of Joining
• Experimental Study on Tensile Strength of Butt Joints for Mild Steel with Thickness 6mm Using Gas Metal Arc Welding (GMAW)
• Chapter 4: Technologies in Chemical Engineering
• A Multiphase Eulerian-Eulerian CFD Simulation of Fluidized Bed Gasification Using Malaysian Low-Rank Coal-Merit Pila
• Numerical Validation of Two-Phase Slug Flow and its Liquid Holdup Correlation in Horizontal Pipeline
• Physiochemical Properties and Fatty Acids Profiles of Oil from Musa Aluminata balbisiana
• Investigation on Mixed Oil-Cement for Wellbore Integrity Using Acoustic Velocity