PrefaceChapter 1: Structural Materials, Functional Metals and AlloysThe Addition of Zr in Nickel-Based Inconel 718 Superalloy to Prevent Hot Cracks PropagationResearch of Deformation Law on High Manganese Steel with Different Alloy CompositionResearch on the Friction and Wear Properties of Magnetorheological FluidsMicrostructural Evolution of TP347H upon Long-Term Service in Power PlantsEffect of Heat Treatment on Microstructural Evolution of 13Cr Martensitic Stainless SteelMicrostructural Evolution of Super304H Steel upon Long-Term AgingResearch Status of Copper Foil Surface Treatment and Development of Novel ProcessEffect of Aging on the Creep Properties and Microstructural Evolution of P92 SteelCorrosion Inhibition on Mild Steel Using PFOA AdditivesEffect of Tin Additions on the Anti-Tarnish Properties of Sterling Silver AlloyFine Tungsten Powder Obtained with Blue Tungsten Oxide through the Hydrogen ReductionEffects of the Processing on Mechanical Properties of High-Strength Structural Steel HG785DLiquid-Liquid Phase Separation in Quenched Fe71Cu10P10B9 Multi-Component AlloyEffects of Sm and Zr Addition on the Microstructure and Mechanical Properties in Mg-Cu AlloysComputational Investigation of Interfacial Cracks Changes of TiAl AlloyApplication of Magnetic Ionic LiquidsExperimental Study on the Impact of Macrosegregation Formation of the Al-Bi Hypermonotectic AlloysNumerical Study on the Impact of Cooling Rate on the Solidification of Al-Bi Hypermonotectic AlloysEffect of Ti Content on Microwave Absorbing Properties of Nd-Fe AlloysImproved Mechanical Properties of AZ31 Alloy Fabricated by Multi-Directional ForgingPreparation of a Light-Weight MgCaAlLiCu High-Entropy AlloyMicrostructure and Mechanical Properties of Ti-Nb-Zr Alloys Prepared by Spark Plasma SinteringNumerical Simulation of Stress Distribution of AZ31B Magnesium Alloy/LY12 Aluminum Alloy Diffusion Welded JointEnhanced Mechanical Properties of Ti(C,B)-Based Cermets with Multi-Component AlCoCrFeNi High-Entropy Alloys BinderModeling the Hot Deformation Behavior of Ti-50.8%Ni Shape Memory AlloySimulation of the Effect of Second Phase Particles in Different Shapes on Grain Growth of Mg Alloy by Phase Field MethodsEffect of Heat Treatment on the Microstructure of Cu-Cr-Zr AlloyInvestigation of Microstructure and Deformation Behavior of a Mg-Gd-Y Alloy Processed by ECAP and Aging Treatment In Situ Investigations of Structures Evolution of Mg Doped Zn4Sb3The First Principle Studies on the Ferromagnetic Shape Memory Effect of Ni2YIn(Y=Fe, Co) Heusler AlloysMicrostructures and Properties of Ti-25Nb-15Zr Alloy for Spectacle FrameMicrostructure, Texture and Mechanical Properties of Mg-Sn-Zn Alloy Sheets Processed by Extrusion and Hot RollingSynthesis, Magnetic and Electromagnetic Absorption Properties of Amorphous Core-Shell Fe-B@SiO2 SubmicrospheresThe Strength-Ductility Balance of an Ultrafine-Grained Medium-Carbon Steel Produced by Severe Plastic DeformationEnhanced Interfacial Bonding Properties in Non-Equilibrium State between Aluminum Matrix and Ultrafined Ni-Nb Glassy Particulate ReinforcementsStructure and Performances of 7075 Aluminum Alloy Surface Subject to Hot-Dip ZincCrystallization Kinetics in Cu64.5Zr35.5 Binary Metallic GlassMagnetostructural Coupling in Mn-Rich Heusler Mn-Ni-In Melt-Spun RibbonsCompositional Dependent Crystal Structure in NiMnGa MatensiteNumerical Study of Vibro-Acoustic Performance of Composite and Sandwich Shells with Viscoelastic CoreHigh Frequency Electrical Properties of Fe/SiO2 Composites by Pressureless SinterChapter 2: Ceramics, Nano- and Inorganic Functional MaterialsEffect of Structure on Refractive Index for SiO2-B2O3-Ta2O5-ZrO2-Na2O System GlassThermal Analysis Kinetics of Pd-Doped SiO2 Organic-Inorganic Hybrid MaterialTiO2 Nanoparticles Synthesized with Ti(SO4)2 as Precursor via the Hydrothermal Method and their Optical Absorption PropertiesFabrication of g-C3N4 Microspheres without Template via Microwave Heating MethodThe Tight-Binding Calculation Research of the Silicene StructureResearch on the Effect of High-Temperature Melting β-SiC by Raw Materials and Power SupplyGlutathione-Directed Green Synthesis of Ag Nanoclusters with Highly FluorescencePreparation and Optical Properties Research on Graphene Quantum DotsPreparation and Properties of β/α SiC Composite CeramicsA Review - The Properties and Applications of Nano-Structured Titanium Oxide MaterialsFacile Fabrication of Bimetallic PtCo Nanoparticles Supported on Three-Dimensional Reduced Graphene Oxide by Ultrasonic-Assisted Method for Oxygen Reduction ReactionSynthesis, Characterization and Properties of PANI/(La-Nd Doped BaFe12O19) CompositesFabrication and Characterization of SiO2/TiO2 Nano-Hybrid ParticlesStudy on Wet-Grinding Preparation of Micro-Nano β-SiCInductive Heating Property of Superparamagnetic Graphene Nanosheets-Fe3O4 Nanoparticles Hybrid in an AC Magnetic Field for Localized HyperthermiaA Facial Route for Preparation of Hydrophobic Nano-Silica Modified by Silane Coupling AgentsLattice Structure and Magnetic Behavior of Ga Ion Doped Multiferroics CaMn7O12Green Synthesis of Monodispersity Gold Nanoparticles with DextranPreparation and Calcination Temperature Optimization of La1-xSrxCo1-yFeyO3 for Removing NOx EffectivelyAn Efficient Method to Form TiO2/CdS Nanotube Arrays Using Anodic Aluminum Oxide (AAO) TemplatesDensity Functional Study on the Configurations of Nen(n=2~36) ClustersRemarkable Sunlight Photocatalytic Activity due to Synergetic Effect of ZnO with CuConvenient Route to Cu-Ag Bimetallic Nanoleaflets with High Content of Cu and their Electrochemical PropertiesEffects of Na-Doping on Structure and Magnetic Properties of LaCoO3Spin Diffusion in the Finite Magnetic HeterojunctionCollagen-Templated Biomimetic Synthesis, Characterizations and Photocatalytic Studies of Anatase Ce/TiO2Synthesis and Characterization of Nd-Doped ZSM-5 Zeolite from Diatom MudSpin Filter and Negative Differential Resistance in Carbon-Based Device with DefectsPreparation and Tensile Property of Nanostructured Cu-Ag Alloy with Bimodal Grain Size DistributionPreparation and Characterization of SO42-/Fe-Al-Activated Solid Acid CatalystChapter 3: Composites and Polymer Functional MaterialsEvaluation of the Aging Behavior of High Density Polyethylene in Thermal Oxidative Environment by Principal Component AnalysisStudy on the Thermal Stability of Expanded Graphite/Stearic Acid Composite Phase Change MaterialsEffects of Air Humidity on Properties of JO-9159 Explosive by Molecular Dynamics SimulationThermal Properties of Carbon Fiber Reinforced Mullite Composites Derived from Sol-GelEffect of Printing Temperature on Mechanical Properties and Surface Quality of Photosensitive Resin Rapid Prototyping PartsEffect of Mechanical Processing on Intrinsic Stress and its Distribution in Polycarbonate Screw CapMolecular Dynamics of the Assembly Modes of the Oligothiophene Polymers with Different Chain LengthsSelf-Healing Polymeric MaterialsThe Properties of Polyimide Fibers Modified by Functionalized Muti-Wall Carbon Nanotubes Based on Friedel-Crafts AcylationPrediction and Analysis on Chemorheology of MeHHPA/Hydantoin Epoxy ResinLow-Working-Temperature and High-NO2-Sensing Properties of SnO2/PANI Hybrid Material SensorsPronounced Visible Light Photocatalytic Activity Obtained from Coupling of TiO2 with Metal Organic Macromolecule In Situ Synthesis of Size-Controlled Silver/Poly(Methyl Methacrylate) NanocompositeEnhanced Thermal and Mechanical Properties of Epoxy Composites by Spherical Silica with Different SizeEffect of Cellulose Crystal Content on the Mechanical Property of Nano-Crystalline Cellulose/Lignin Composite Fibrous FilmUltrasonic Effect on Fabrication of Intercalated MgAl-LDH/PVA Nanocomposites via Exfoliation-Adsorption RouteDesign and Preparation of Smart Adaptive Structure Made with SMA-SMP CompositeA Technology of Composite Reinforced InfiltrationRemarkable Mechanical and Thermal Increments of Epoxy Composites by Graphene Nanosheets and Carbon Nanotubes Synergetic ReinforcementThermally Conductive Nanocomposites Based on Epoxy Modified with SiC and POSSEffect of Addition on Oxidation Resistance of Ti3SiC2 Matrix CompositesMicrostructure and Thermal Physical Properties of a β­SiCp/Al Composite for Electronic Packaging Produced by Powder MetallurgyDynamic Thermal Mechanical Behaviors and Mechanical Properties of Reversible Thermochromism Wood-Plastic CompositeChapter 4: Semiconductors and Materials for Electronics and OptoelectronicsThe Influence of Lattice Vacancy on Electrical and Optical Properties of Mg2SiCharacterization of MoO3 Solution Prepared Using Bath DepositionEffects of Charge Compensators on Structure and Luminescent Properties of Microwave Synthesized CaMoO4:Eu3+ Red PhosphorsMorphology Control and Photoluminescent Properties of Bundled ZnO Nanorods Array Based on Silicon Nanoporous Pillar ArraySynthesis and Photoluminescence Properties of Sc0.88-xLu0.05VO4:Eu3+0.07,Bi3+x Red PhosphorPreparation and Luminescence Properties of Dy3+ Doped Sr3Lu(PO4)3 as a New Single Phase White Light Emitting PhosphorUp-Conversion Luminescence Properties of Ho3+ Doped and Yb3+/Ho3+ Co-Doped Y2WO6 PhosphorsSynthesis and Luminescence Properties of a Blue-Emitting Sr3NaLu(PO4)3F:Eu2+ PhosphorSynthesis, Crystal Structure and Luminescence Property on Cabazoly-Based Zinc Metal Organic FrameworksSimplified Synthesis and Luminous Mechanism of Eu2+-Doped α-Si3N4 Nanowires with Strong Green Luminescent PropertiesChapter 5: Functional Materials for Energy Production and Energy StorageSynthesis of MoSe2-MoO2@Biomass-Derived Honeycombed Carbon Composite and its Application in LIBA Facile In Situ Synthesis of Carbon Supported Nickel Phosphide (Ni5P4@C) and Application as Hydrogen Oxidation Reaction Catalyst in Alkaline ElectrolyteThe Effect of Calcination Temperature on Electrochemical Performance of Porous LaMnO3 Catalyst in Al-Air BatteryFacile Synthesis of Electrospun LiNi0.5Co0.2Mn0.3O2 Nanofiber as High-Performance Cathode for Lithium-Ion BatteriesCurrent Development of Key Materials for Low Temperature Fuel CellsNiMn2O4 Nanosheet Arrays with Controlled Mass Loading as Pseudocapacitor ElectrodesSynthesis of MIL-125/Graphene Oxide Composites and Hydrogen Storage PropertiesShuttle-Like CuO as High-Performance Anode Materials for Lithium Ion BatteriesStudy of Pore Modality of Irradiated UO2 Fuel AssemblyPreparation and Electrochemical Properties of LaMnO3 Powder as a Supercapacitor Electrode MaterialPorous Carbon Derived from Metal-Organic Framework as an Anode for Lithium-Ion Batteries with Improved PerformanceDensity Function Theory Calculation of Crystal Properties and Electronic Structure of δ-PuSnO2 Nanoparticles for Lithium-Ion Batteries Prepared by Sol-Gel MethodStudy on Al-BiCl3-Hydride Composites Hydrogen Generation MaterialsHomogeneous Growth of Ni(OH)2 Nanoparticle on Carbon Nanotubes for High-Performance Supercapacitor Electrode MaterialElectrochemical Performance of Spherical Li3V2(PO4)3/C Synthesized by Spray Drying MethodA Comparison of Different Ways of Mixing the Lithium Salt on the Electrochemical Properties for Li[Li0.2Mn0.54Ni0.13Co0.13]O2 MaterialsPreparation of Co-B Alloy with the Assistance of the Sonication and its Electrochemical PropertiesMetal-Organic Frameworks/Carboxyl Graphene Derived Porous Carbon as a Promising Supercapacitor Electrode MaterialPeparation of 20 wt.% Pt0.5Pd0.5/C Nanoelectrocatalysts by Electroless and their Electrocatalytic PropertiesPreparation of Nickel and Manganese Oxides Composite via Co-Precipitation Method and its Supercapacitive PerformancePreparation of Co-Ni Mixed Oxide/Graphene Composite and its Electrochemical Performances as Supercapacitor MaterialSynthesis and Evaluation of a New Kind of Kinetic Hydrate InhibitorChapter 6: Materials for Biomedical ApplicationPreparation and Drug Release Properties of a Novel PLA-PEG-PTX Pro-DrugNetwork Connectivity in Icosahedra Medium-Range Order of Metallic Mg70Zn30 AlloySelf-Toughness Porous Sodium Titanate Bioceramics Prepared via In Situ Grown Na2Ti6O13 RodsPreparation of PMMA/Nano-Cu Antibacterial Plastic by In Situ PolymerizationChapter 7: Materials for Application in Environmental EngineeringFabrication and Water Treatment Application of High Efficient PbO2 ElectrodeFacile Synthesis of CeMOFs-Graphene Oxide Composites for Photocatalytic Degradation of Methylene BlueProblems and Prospects of Water-Supply by UltrafiltrationStudy on Photocatalytic Reduction of Cr(VI) by Fluorine-Doped TiO2Hydrothermal Synthesis of Flower-Like CuO/ZnO/SiNWs Photocatalyst for Degradation of R6G under Visible Light IrradiationAdsorption of Methylene Blue and Congo Red on Bentonite Modified with CaCO3Adsorptive Removal of Ni(II) Ions from Aqueous Solution by Polyacrylic Acid/Attapulgite Composite HydrogelsEffect of Mixing Ratio and Doping Acid on the Photocatalytic Properties of PANI-BiVO4 CompositesThe Role of Bicarbonate in Ion Speciation Plots in DEAB and Blended MEA-DEAB Systems, an NMR StudyChapter 8: Thin Film, Membrane and Coating MaterialsPreparation and Oxidation Properties of Carbon/Carbon Composites with the Antioxidant SiC/NiCS CoatingPalladium-Silica Organic-Inorganic Membrane Materials via a Sol-Gel Process: Preparation and Properties Calcined under H2 AtmosphereStructure and Properties of Chitosan and Polyvinyl Alcohol Blend FilmElectroless Deposition of NiMoB Diffusion Barrier Layer Film for ULSI-Cu MetallizationPlasma-Enhanced Atomic Layer Deposition of GaN Thin Film at Low TemperatureEffects Studying of Annealing to Mechanical Properties Carbon-Doped Ti-O Films Synthesized Using CO2 GasFast Thermal Annealing of CH3NH3PbI3-xClx Films for Improving Hybrid PhotovoltaicsResearch on the Properties of Sol-Gel Deposited WO3-NiO Thin FilmsThe Effects of the Carrier Concentrations on the Hall Mobilities of ZnO:Al Thin Films Deposited by Magnetron SputteringRadio Frequency (RF) Magnetron Sputtered Barium Strontium Titanate (BST) Thin FilmPreparation of Coated ZrSiO4-ZrB2 Using Sol-Gel Method and its Oxidation ResistanceZrSi2-SiC/SiC Anti-Oxidant Coatings Prepared on Graphite Spheres by Two-Step Pack Cementation ProcessApplication of Mg-Al Layered Double Hydroxides Composite Fillers in the Water-Based Heat Insulation CoatingHot-Press Sintering of the W-40wt.%Cu Composite Tape-Casting FilmEffect of Diffusion-Temperature on Microstructure and Mechanical Properties of Diffusion-Bonded TC4/Al Thin Film/1060 Al JointsThe Influences of Frequency on the Fabrication and Structural Studies of Micro-Arc Oxidization Ceramic Films Formed on Pure TitaniumMicrostructures and Magnetic Properties of CoPt-C Nanogranular FilmsRapid Preparation of YBCO Coated Conductor by Chemical Solution DepositionStructural and Ferromagnetic Properties of Ho-Doped BiFeO3 FilmsNeutral Molten Salt-Bath Carburizing of Ti6Al4V Alloy with Nanocrystalline Surface Layer at Low Temperature Assisted by Surface Mechanical Attrition TreatmentModification of VO2 Nano-Powders by Stearic Acid and its MechanismPreparation and Properties of Nanocomposite MWCNTs/Polyamide Reverse Osmosis Membrane for Desalination by Interfacial PolymerizationChapter 9: Building MaterialsPreparation and Characteristics of Light Foam CementInfluencing Factors of Setting Time about Magnesium Phosphate CementExperimental Study on Strain and Damage Inspection of Cementitious Composites In-Filled with Graphene NanoplateletsEffects of Cement Additives on Alinite Cement-Based Materials from Municipal Solid Waste Incineration (MSWI) Fly AshInfluence of Concrete Synergist on Performance of Stone Chip ConcreteResearch on the Foamed Concrete with High Volume Fly AshPreparation and Composition Optimization of Low-CO2-Emission Cement Containing Belite, Calcium Sulfoaluminate and FerriteInfluence of Physical Strengthening Technology on the Properties of Recycled Coarse AggregateResearch Status and Development Trend of High Sand Filling MaterialsNano-Engineered Strong, Durable and Multifunctional/Smart ConcretesThermal Stability of Geopolymer - Sr Contaminated Zeolite A Blends