Selected, peer reviewed papers from the 20th Chinese Materials Conference 2019 (CMC 2019) Selected, peer reviewed papers from the Chinese Materials Conference 2019 (CMC 2019), July 10-14, 2019, Sichuan, China

PrefaceChapter 1: Properties and Processing Technologies of Structural Alloys and Non-Ferrous MetalsRemoval Mechanism of Titanium Alloy Material in Ultrasound Vibration DrillingEffect of Strontium Modification on the Morphology of Primary Si in Hypereutectic Al-Si AlloysDeoxidation Process of Oxidized Zirconium AlloyEffects of Alloying Process on Inclusions in Fe-9Cr Alloy Reinforced with Y2O3 NanoparticlesMicrostructure Formation and Nanoindentation Behavior of Rapidly Solidified Cu-Fe-Zr Immiscible AlloysEffect of RE Addition on the Solidified Process and Microstructure of Al-7Si-0.3Mg AlloysCorrelation between Solidified Microstructure Evolution and Undercooling of Au-12 Wt.%Ge Eutectic AlloyMechanical and Tribological Behaviors of WAl12 Reinforced 2024 Aluminum Alloy Matrix CompositesResearch on Strong Spinning Process of GH4169 AlloyPreparation of Titanium Alloy Powder by Plasma Rotating Electrode ProcessMicrostructure and Mechanical Properties of 5052 Al Alloy by Cryogenic RollingMicrostructure and Mechanical Properties of GMAW Welded Joints Er-Containing Aluminum AlloyPenetration Damaging Behavior of TB17 Titanium AlloyEffect of Extrusion Temperature on Microstructure and Mechanical Properties of 7A36 Aluminum AlloyInvestigations on the Hardness Distribution and Microstructure of Friction-Stir-Welded 6082 Aluminum AlloyMicrostructure of 7N01 Aluminum Alloy Microalloyed with Er and Zr in the Homogenization ProcessMicrostructure and Macrosegregation of Ф508 mm 7050 Aluminum Alloy Billet under Internal Electromagnetic StirringMicrostructure of 7075 Aluminum Alloy by HomogenizationModeling of Yield Strength in Retrogression of RRA Treatment of Spray Formed Al-Zn-Mg-Cu AlloyEffect of Ca and Zr Additions and Aging Treatments on Microstructure and Mechanical Properties of Mg-Sn AlloyEffect of Ca on Microstructure and Mechanical Properties of Directionally Solidified Mg-Zn-Ca AlloysEffects of Process Parameters on Shrinkage Porosity in 357 Semi-Solid Die Casting PartsStudy on Compression-Torsion Deformation Behavior and Recrystallization Grain Size of Mg13Gd4Y2Zn0.5Zr AlloyMicrostructural Evolution and Properties of Cu-1.5 Wt %Ti Alloy during AgingMicrostructure, Texture and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy during Repetitive Upsetting-Extrusion after Heat TreatmentMicrostructure and Properties of Rapidly Solidified Al-Zn-Mg-Cu AlloyMicrostructures and Mechanical Properties of a New Type of High Temperature Titanium AlloyEffect of Primary α Phase Content on Creep Property of High Temperature Titanium AlloyEffect of Heat Treatment Process on Microstructure of a New Metastable β Titanium AlloyHot Compressive Behavior and Constitutive Equation of Ti-Al-Nb-Zr-Mo-Cr AlloyConstitutive Equation and Hot Processing Map for Tensile Test of Mg-13Gd-4Y-2Zn-0.5Zr Alloy at Elevated TemperatureSemi-Solid Rheological Squeeze Casting Process of ZL114A Aluminum Alloy Thin-Wall Complex CastingEffect of Different Deformation Methods on Microstructure Evolution of TC4 Titanium Alloy Prepared by Spark Plasma SinteringFatigue Crack Growth Behavior of TA29 Titanium Alloy at Different TemperaturesPreparation of 2A14 Aluminium Alloy Large-Sized Hollow Ingots by Electromagnetic Stirring DC CastingStructure Evolution of Au50Cu50 Alloy from Melt to the Disordered Solid SolutionSolidification Microstructure and Mechanical Properties of Bulk Near-Eutectic AlCoCrFeNi2.2 High Entropy AlloyEffect of Combined Electromagnetic Fields on Microstructure and Properties of Large-Sized Ingot of 2219 Aluminum AlloyMechanical Behavior and Microstructure of Hot Deformation of with Er 7N01 Aluminum AlloyOxidation Behavior of Ta-W AlloyPrecipitation Behavior and Strengthening Mechanism of Second Phases in AZ31-1.3Ca-1.0Sm-0.3La AlloyMicrostructure of Ti-Based Alloys after Rapid SolidificationEffect of Solution Treatment on Second Phase Dissolution for an Al-9.2Zn-2.0Mg-1.9Cu AlloyAnalysis of Porosities in Nickel-Based Superalloys PowdersUltrasonic Preparation of Submicron Low Melting Point Alloy PowderNon-Isothermal Kinetics Analysis of α→β Transformation in Zirconium AlloyMicrostructure and Mechanical Properties of a Novel Ti-6.5Al-2Sn-4Zr-1.5Mo-2Nb-0.25Fe-0.2Si High-Temperature Titanium AlloyEffect of Cu Content on Ageing Behavior for AA3104-H19 Can Body Sheet In Situ Observation on the Deformation Behavior of Primary α-Ti in a Textured Ti-6Al-4VDevelopment of Copper Alloy-Steel Bimetallic Bearing Materials and Manufacturing TechnologyMicrostructures and Phase Formation of Refractory MoNbTaVZr High Entropy AlloyPreparation and Properties of Spherical Mo Powders by Plasma Rotating Electrode Process for Additive ManufacturingEffects of Electromagnetic Agitation on Crystal Growth during the Pure Aluminum Slow Cooling ProcessA Review on Water Footprint Research of Materials IndustryProgresses on Development of Manufacturing Methods of High Purity Tungsten TargetsFinite Element Analysis on Processing of PCD End-Mill Milling CopperMicrostructure and Texture Evolution of 0.6 mm Ultra-Thin-Walled Tubes of Magnesium Alloys Fabricated by Multi-Pass Variable Wall Thickness Extrusion (VWTE)Microstructural and Textural Evolutions of OFHC Cu during the CECC Process and Annealing TreatmentChapter 2: Properties and Processing Technologies of Structural SteelsGrowth Kinetics of Interfacial Intermetallic Compound in Al(AA4343)/Steel(SUS316) Clad StripMicrostructure and Properties of 20G/316L Dissimilar Metal TLP Welded JointsMicrostructure and Properties of Lean Duplex Stainless Steel UNS S32101 Welded Joint by Hot Wire TIG WeldingEffect of Thermal Aging on the Stress Corrosion Cracking Sensitivity of Z3CN20.09M Stainless SteelStatic Recrystallization Behavior of Non-Quenched and Tempered Steel 38MnSiVSEffects of Zero Time Holding Quenching Temperature on Tempering Microstructure and Mechanical Properties of 40Cr SteelSimulation of Mechanical Property and Fracture Behavior of Reactor Pressure Vessel Steel by Small Punch TestEffect of Ferritic Hot Rolling Process on Microstructure and Properties of IF SteelEBSD Study of the Effect of Hot Deformation on Low Carbon Bainitic StructureRetained Austenite Control and Extra-Cryogenic Impact Toughness of Fe-3.0%Mn Low Carbon SteelPrediction Model for Microstructure and Properties of Medium Carbon Non-Quenched and Tempered Steel BarEffect of Composition System on Microstructure and Properties of 1000-MPa Grade Cold Rolled DPSteelAccelerated Transformation of Hot Deformed Austenite in SCM435 SteelEffects of Final Cooling Temperature on Microstructure Transformation and Properties of Q550 Low Carbon Bainite SteelReliability Prediction of Variable Amplitude Corrosion Fatigue Life of TP140 Casing SteelComparative Study on Hydrogen Embrittlement Susceptibility in Heat-Affected Zone of TP321 Stainless SteelInvestigation on the Microstructure and Mechanical Properties of T23 Steel during High Temperature AgingOptimized Design of Ultra-High Strength Stainless Steel Based on Thermo-Calc CalculationEffect of Tempering Temperature on Microstructure and Properties of Low Carbon High Silicon Alloy Steel Treated by Q-P-T ProcessAnalysis of Interfacial Bonding Strength and Microstructure of Rolled Clad PlatesApplications of Nickel-Based Alloy for Oil Country Tubular GoodsAnalysis of Tensile Properties of N80Q Steel and 80SH SteelApplication Feasibility Study of High Strength Pipeline Steel to Rig Derrick and SubstructureMechanical Response and Performance Relationship of X70 Pipeline Steel with Weld ZoneChapter 3: Polymers and CompositesPreparation and Property of Waterborne Polyurethane/Cellulose Nanofiber Nanocomposite FilmsPreparation and Magnetic Properties of Fe@SiO2 Soft Magnetic CompositesMicrostructure and Properties of Co@RGO/Cu Composites by One-Step In Situ Reduction MethodFunctionalization of MWNTs and its Influence on Thermal Performance of Modified Diphenyl Ether Polyimide FilmsManufactory and Properties of Poly(p-Phenylenebenzobisoxazole) Aerogels Prepared by a Simple Freeze-Drying ProcedurePreparation and Properties of Halogen-Free Flame Retardant Polyurethane for Superfine Fiber LeatherEffect of Simulated Seawater on Flexural Property of Corn Straw Fibers Reinforced Polypropylene CompositesEffect of Carbon Nanotubes Sizing Agent on the Mechanical Properties of Carbon Fiber/PP CompositeSynthesis of Four-Armed Star-Shaped Poly(N,N- Diethylacrylamide) by Group Transfer Polymerization in the Presence of HydrosilylaneEffect of Air Oxidation Treatment on Interficial Properties of Carbon FibersPreparation of Silver Nanoparticles-Loaded Gel Fibers Based on Microfluidic Method and its Application as SERS SubstratesEffect of Copoly(Ester-Amide 6)(PET-PA6) on Compatibility of PET/PA6 Blended FibersEffect of Casting and Additive Manufacturing on the Microstructure and Mechanical Property of Al-Cu CompositesEffect of Graphene Content on Microstructure and Properties of Gr/Cu CompositesEffect of SiC Defects on Performance of Particle Reinforced Aluminum Matrix CompositesEffects of Sintering Parameters and WC Addition on Properties of Iron-Nickel Pre-Alloy Matrix Diamond CompositesEffects of Retrogression Treatment Process on the Mechanical Properties and Corrosion Behavior of the Graphene/7075 Aluminum Matrix CompositeSemi-Solid Precision Forming Process of High-Strength and Wear-Resistant Aluminum Matrix CompositesChapter 4: Advanced Functional MaterialsHigh Temperature Stability of Zirconium TungstateCo-Amorphous Telmisartan-Pimelic Acid with Improved SolubilityEffect of the Addition of Short Carbon Fiber on Thermal Insulation Properties of ZrB2- SiC Hot-Pressed CeramicsEffect of Additive Glycerol on Piezoelectric Properties of Modified Sol-Gel (Ba0.85Ca0.15)(Ti0.9Zr0.1)O3 CeramicsApplication Perspective of Environmentally Responsive Materials in the Downhole OperationPreparation of Nanocrystalline Fe2O3 Powder by Cryomilling with Liquid Nitrogen and its Magnetic PropertyCobalt Element Doping for Biomedical Use: A ReviewDevelopment of Ferromagnetic Sputtering Targets with High PerformanceNumerical Simulation of Ti-Based Metallic Glasses as Whipple Shield Bumper by Smoothed Particle Hydrodynamics MethodsEffect of Nano Sodium Titanate/ Potassium Titanate Whisker on Tribology Behavior of Brake MaterialsPreparation and Formation Mechanism of High-Energy Ball-Milled Sn4P3Effect of Ruthenium on Microstructure and Properties of WC- (W, Ti, Ta) C-Co Cemented CarbideIntegrated Computation and Preparation Optimization of In Situ Ordered Porous Aluminum Filled TubesQuasi-Static Axial Compression Behavior and Energy Absorption Evaluation of Steel Foam-Filled TubesPreparation and Characterization of High Mobility Nb-Doped SnO2 Transparent Conducting FilmsEffect of Amount of Nb/Ti Co-Doping on the Microstructure and Electrochemical Performance of SrCoO3-δ-Based PerovskiteLotus Leaf Derived Natural Dye as Sensitizer and Biochar as Counter Electrode for Dye-Sensitized Solar CellsEffect of Hydrothermal Conditions on Crystal Structure, Morphology and Visible-Light Driven Photocatalysis of WO3 NanostructuresEffects of Co Doping on the Thermoelectric Properties of Cu3SbSe4 at Moderate TemperatureThe Effect of Stretching on UHWMPE Microporous Film by Thermally Induced Phase Separation MethodImproved Sublimation Resistance of Skutterudites by Silane Modified Ceramic-Based CoatingPreparation and Numerical Simulation of Heat Transfer Performance for Methyl Palmitate-Methyl Stearate Binary Eutectic Mixture/Expanded Graphite Composite Phase Change MaterialPreparation and Characterization of Low Dielectric Constant Films Using Silicon SourcesGreen Synthesis of Tungsten Ditelluride and the Magnetoresistance PropertyChapter 5: Computational Procedures in Materials ScienceMicroscopic Properties of Point Defect and its Cluster in Delta-Phase Plutonium: A Molecular Dynamics StudyEffect of Grain Boundary Energy in Recrystallization Simulation by Phase Field MethodComputational Studies of the Synthesis of Decaborane with OlefinsPhase Field Study of Second Phase Particles-Pinning on Strain Induced Grain Boundary MigrationNumerical Simulation of Ni-Cu Alloy Dendrite Growth with Boundary Heat FluxThermodynamic Calculation of the Liquidus Projections of the Al-Cu-Fe-Si and Al-Cu-Fe-Mg-Si Multicomponent Systems on Al-Rich SideSteady-State Dynamic Phase Diagram Calculation of U-Ti and U-V Binary System under IrradiationUsing ProCAST to Study the Effects of SEED Process Parameters on the Radial Temperature Distribution in Semi-Solid SlugsCascades Damage in γ-Iron from Molecular Dynamics SimulationsFirst-Principles Study of Structural, Mechanical, and Thermodynamic Properties of Refractory Metals (Rh, Ir, W, Ta, Nb, Mo, Re, and Os)Thermodynamic Calculation of the Liquidus Projections of the Al-Cu-Fe-Mg, Al-Cu-Mg-Si, and Al-Fe-Mg-Si Quaternary Systems on Al-Rich CornerThermodynamic Study of Equilibrium Phase in Quasicrystalline Strengthened Magnesium AlloysKinetic and Strength Calculation of Age-Hardening Phases in Heat-Resistant Aluminum Alloys with SilverDevelopment of Interatomic Potentials for FCC Metals Based on Lattice Inversion MethodChapter 6: Functional Coatings, Surface Treatment, Corrosion Behavior and Failure Analysis of Structural MaterialsBending Strength and Cutting Performance of WB-Coated-Diamond/Fe-Ni CompositesCorrosion Resistance of Nickel-Based Composite Coatings Reinforced by Spherical Tungsten CarbideCorrosion Behavior of Cobalt Alloy Coating in NaCl SolutionErosion Behavior of PS-PVD Thermal Barrier Coatings and the Effect of Composite Coating (PS-PVD + APS) ThicknessSurface Control of K9 Glass/Diamondunder Cold Plasma Assisted CuttingCorrosion Resistance of Zinc Phosphate Conversion Coatings on AZ91D SurfaceFailure Analysis on Friction and Wear of Tool JointsEffect of Nickel Plating on MoS2 on Friction and Wear Properties of Cu-MoS2 CompositesEffect of Graphene Content on Composition and Corrosion Resistance of Co-Ni-Graphene Composite CoatingResearch Progress on Anti-Corrosive Properties of Graphene Modified CoatingsAlCoCuFeNi High-Entropy Alloy Coating Fabricated by Laser Cladding with Gas-Atomized Pre-Alloy PowdersThreaded Failure Analysis for Three-Dimensional Horizontal Wells CasingLeakage Failure Analysis of 80SS Tubing in Gas FieldCorrosion Behavior for Casing in Producing Well with Water Injection Technology during Long-Term ServiceAnalysis of Weld Cracking in a Low-Pressure Steam PipeExperimental Study on Flow-Induced Corrosion of Casing and Tubing Steel for Heavy Oil Thermal Recovery WellsCasing Bearing Capacity with Shear Load for Shale Gas WellsSimulation of Gas-Liquid Two-Phase Flow-Induced Corrosion at Premium Connection in High Productivity Gas Wells Containing CO2Challenge and Review of Hydrogen Sulfide Corrosion Resistance Steels for Oil Country Tubular GoodsTest Analysis of Corrosion Perforation in a Crude Oil Gathering PipelineAnalysis of Corrosion Causes in the Export of a Compressor in the Pipeline of Western ChinaLeakage Failure Analysis of the ERW Steel PipelineDevelopment Direction of Pipeline Corrosion Research on Oil Refining and Chemical EnterprisesFracture Failure Analysis of Φ50.8mm Coiled TubingAnalysis of Corrosion Behavior on External Surface of 110S TubingFracture Failure Analysis of C110 Oil Tube in a Western Oil FieldExperimental Study on Corrosion of Multi-Component Thermal Fluid Thermal Recovery well Tube StringFailure Analysis and Solution to Bimetallic Lined PipeExternal Stress Corrosion Cracking Risk Factors of High Grade Pipeline SteelFailure Cases Analysis in Aerospace FieldSurface Galling Mechanism Analysis of Rotary Shouldered Thread ConnectionFailure Analysis and Service Life Prediction of 80SH Casing Steel under Thermal Cycle Service EnvironmentChapter 7: Properties of Oil Well Cements and Advanced Building MaterialsEffects of Compressive Stress on Carbonation-Induced Degradation of Oil Well Cement under CO2 Storage EnvironmentFunction Synergy of a New Type of Fluid Loss Additive Formula for Comprehensive Performance of Oil Well CementSealing Analysis of Cement Plug in Offshore Abandoned WellsPerformance Evaluation of Polycarboxylic Acid Dispersant for Oil Well CementingSalt-Tolerance Performance of Oil Well Cement Fluid Loss Additive SSS/HAM/IAMechanical Properties and Microstructure of Slag Solidified BodyEffect of FCC Slurry on Performance of SBS Modified BitumenSynthesis and Application Performances of Solid Polycarboxylate Superplasticizers Using Different InitiatorsPerformance Evaluation of Anti-Ultraviolet Ageing Bitumen with Combined Modification Based on Dynamic Rheological TestEffect of Pore Structure and Ion Concentration of Solution on the Formation of Ettringite in Composite Cement PasteChapter 8: Materials, Technologies and Assessment Methods in Environmental Engineering and Waste RecyclingOne-Step Synthesis of Visible-Responsive Diatomite/g-C3N4 Composite and its Catalytic Degradation for Cr(VI)Effect of Cement Raw Meal on the NO Reduction by Biomass CharEffect of Dimethyl Sulfoxide in Hydrophobic Modification of Cotton Filter Cloth by ARGET-ATRP MechanismLife Cycle Assessment of Green Production of Glass SubstratePreparation of Alginate Polymer Gel Pellets and its Adsorption on Acid DyesPreparation of CTS/MFA Composite and its Adsorption Property of Direct DyesRemoval of Metal Impurities from the Spent Hydroprocessing Catalyst and Acid Leaching Kinetics of AluminumPreparation of Hydrated Calcium Silicate Gel and its Adsorption Properties for Cu(II)Effect of Silica-Alumina Ratio of Catalysts on NO Decomposition Rate in Cement Kiln ExhaustEnvironmental Impacts Assessment of NCM Cathode Material Production of Power Lithium-Ion BatteriesAnalysis of Water Consumption Intensity for Steel Production in ChinaComparative Life Cycle Assessment between Ordinary Gypsum Plasterboard and Functional Phase-Change Gypsum PlasterboardTechnical Specification Development for Ceramic Tile Type III Environmental DeclarationsLife Cycle Assessment of Comprehensive Utilization of Calcium Carbide Slag in Cement KilnOne-Step Hydrothermal Synthesis of 1T@2H MoS2 for Enhanced Photocatalytic Degradation Performance of Methyl BlueDetermination of Antimony in Recycled Polyester Fiber by ICP-OES with Different Pretreatment MethodsDetermination of Volatile Organic Compounds in Recycled Polyethylene Terephthalate Fibers by HS-GC-FID to Evaluate the Efficiency of Testing ConditionsQuantitative Analysis on Green Product Index of Sanitary WaresEnvironmental Analysis on Co-Processing of Domestic Waste in Cement KilnRecent Developments on Life Cycle Assessment of Building MaterialsCarbon Emissions Analysis of Rock Wool Board Products