Selected peer-reviewed extended articles based on abstracts presented at the 5th International Conference on Materials Science and Manufacturing Technology (ICMSMT 2023)

Aggregated Book

• Preface
• Chapter 1: Alloys and Steel
• Effect of Austempering Parameters on Microstructure and Tensile/Impact Behaviours of Micro-Alloyed TRIP-Assisted Steel
• Development of a Neural Network Model and Taguchi-Based Optimization for Dry Sliding Wear Performance of Al 6065 Alloy Reinforced with Nano SiC and Graphene Nanoplatelets
• Influence of Ca and Ce Additions on Microstructure and Microhardness of Squeeze-Cast AZ91 Mg Alloy
• Prediction of Surface Roughness of Monel k 500 Super Alloy by Using Artificial Neural Network
• Estimation of Planar and Normal Anisotropy Parameters of Al 8011 Sheets as Cold Rolled and Cold Rolled with Annealed Condition
• Neural Network Approach on Influence of Ceramics on Dry Sliding Wear in Al-Cu-Zr Metal Matrix Composite
• Chapter 2: Welding
• Process Parameter Optimization of Aerospace-Grade Dissimilar Aluminium Alloy 7075 and 2014 by Friction Stir Welding
• Correlation between Microstructure and Bending of FSW and TIG Welded Mg-Rich Aluminium Alloy Joints
• Hardness and Microstructure Analysis of Rotary Friction Welded Dissimilar Joint of Cu and Ti-6Al-4V
• Experimental Investigation of Friction Stir Welding on Al 2024-T3 and Al 7075-T6 Alloy
• Chapter 3: Materials Processing
• An FEM-ANN Based Analysis of Cutting Force and Cutting Tool Deflection to Predict Tool Wear in Double Tool Turning Process
• Evaluation of Machinability Performance MRR and SR of AA7050-7.5% B4C-T6 Composite through EDM
• A Novel Approach of Heat Assisted Parallel Turning Process
• Mathematical Model of Material Removal Rate during Milling of AISI D2 Tool Steel Using Response Surface Methodology
• Chapter 4: Coatings
• Numerical Modeling of Critical Velocity and Deformation Behavior in Cold Spray Using Lagrangian and Arbitrary Lagrangian Technique
• Synthesis, Characterization of Chromium Oxide Powders and Coatings
• Surface Hardening of CP Ti by Laser Hardening and Development of Ti/TiC Surface Composite by Laser Sintering Technique for Wear Resistant Surface
• Chapter 5: Thin Films
• Studies on Lead Sulphide (PbS) Thin Film Prepared by Chemical Bath Deposition Method
• Effect of Annealing Temperature Variation on Al-Doped Nickel Oxide Thin-Film Synthesized by Dip-Coating Technique
• A Study on the Inclusion of Higher Dopant Proportion on ZrO₂ Thin Film Deposited by Spray Pyrolysis Method
• An Embedded System Approach to Design and Development of an Automatic Spin Coating Machine for Thin Film Applications
• Effect of Lanthanum Doping on Properties of ZnS Thin Films for Water Splitting
• Optical Characterization of Semiconducting Thin Films Using UV-VIS-NIR Spectroscopy: A Review
• Chapter 6: Ceramics and Glasses
• Physical and Luminescence Properties of Europium Ions Doped Barium Tellurite Glass
• Physical and Optical Properties of Lead-Tungsten-Tellurite Glasses
• Impedance Spectroscopy Analysis of (1-x)Ba_0.06(Na_1/2Bi_1/2)_0.94TiO₃-xNaTaO₃ Ceramics
• Fragility and Modified Gibbs-DiMarzio Relation Verification in Chalcogenide Materials
• Structure, Microstructure, and Dielectric Properties of Bi_0.5(Na_0.78K_0.22)_0.5TiO₃ Lead-Free Ceramic
• Effect of Milling on Dielectric Properties of PZT
• Dielectric and Mechanical Properties of PZT Incorporated PVDF Nanocomposites Prepared by Solution Casting Method
• Chapter 7: Functional Nanomaterials and Composites
• AC Susceptibility and Superconducting Properties of Te-Substituted TlSr₂Ca(Cu_2-xTe_x)O₇
• Evolution of Structure and Dynamic of Simulated CdTe Model According to the Melting Process
• Influence of Copper Doping on Structural and Opto-Electronic Properties of Zinc Oxide Nanoparticles
• Impact of Quantum Dots on Refractive Index of Nematic Liquid Crystal Polymer System
• The Effect of Hydrothermal Temperature and Sample Thickness on the Synthesis of BaFe₁₂O₁₉@MnO₂ Core-Shell Composites
• Effect of Annealing on the Physical Properties of LaFeO₃ Perovskite Nanomaterial Prepared by Co-Precipitation Method for H₂ Generation
• Melting Process of the Two-Dimensional Material BN: Insights from Molecular Dynamics Simulations
• Investigation of Structural, Morphological and Luminescent Features of Eu³⁺ Activated Molybdate Based Phosphor for W-LED Applications
• Chapter 8: Electrochemistry
• Performance Analysis of the Protection Effect Cow Bone and Coconut Shell Particulates on 1170 Aluminium Alloy in Dilute Electrolytes
• Data Evaluation of the Protection Performance of Maize Husk Particulate Reinforcements on 1170 Aluminium Alloy Corrosion in Dilute Electrolytes
• A Disposable Electrochemical Sensor Based on Poly-5-Amino-1-Naphthol Modified Electrode for the Quantification of Tyramine
• Chapter 9: Biomaterials
• Kinetics of Essential Oil Extraction of Kaffir Lime Peel Using Microwave Assisted Hydrodistillation
• The Fragility of Glassy Corn Starches
• Effect of Plant Oil Derived Bio-Resin and Curing Temperature on Static and Dynamic Mechanical Properties of Epoxy Network
• Chapter 10: Research and Prevention of Materials Defects and Failures
• Development of Manufacturing Process for High-Chromium Steel Large Welding Roll
• Fatigue Crack Propagation in 5754 Aluminum Alloy under Four-Point Bending
• Physical Experiments and DEM Simulations for Erosion of Iron Target by Two Impingements of Al₂O₃ Particle with Impingement Angles of Double 90º
• Wafer Defect Identification with Optimal Hyper-Parameter Tuning of Support Vector Machine Using the Deep Feature of ResNet 101
• Chapter 11: Waste Treatment
• Synthesis of Iron-Carbon (Fe⁰-C) Nanocomposite and its Use for the Removal of Rhodamine-B and Hexavalent Chromium from Aqueous Solutions
• Development and Characterization of Green Composites from Agro Waste Aloe Vera and Pineapple Leaf Fiber
• Effect of Acids and Alkaline Pretreatment of Used Tea Waste Powder under Microwave-Assisted Pretreatment
• Fractographical Characterization of Jute Fibre Reinforced Paper Composite Subjected to Drop Test
• Characterization of Developed Agro-Based Adsorbents: A Study
• Activated Carbon from Rice Husk: Optimization and Characterization
• Stabilization of Clay Using Groundnut Shell Ash and Sugarcane Bagasse Ash
• Mechanical Characterization of Pineapple Leaf Fiber Epoxy Composites with Steel Wire Mesh
• Chapter 12: Green Building Materials
• Tangential Adhesive Strength of the Masonry with PET-Fibres Modified Mortar
• Experimental Analysis of High-Strength Concrete Using Granite Aggregates
• Mining Waste Utilization as a Sound Absorbing Material
• Experimental Investigation on Strength Characteristics of Concrete by Partial Replacement of Cement with Sodium Silicate
• Assessment of Strength and Durability Parameters of Geopolymer Concrete Blocks with Different Sand Replacement Levels
• Performance of Strength and Modulii Characteristics of Ceramic Waste Aggregate Concrete (CWAC)
• Experimental Studies on Concrete Using the Partial Replacement of Cement by Red Mud
• Experimental Studies on Self-Compacting Alkali Activated Slag Concrete Mixes Incorporating Reclaimed Asphalt Pavement as Fine Aggregate
• An Innovative Study on Utilisation of Pareva Dust and Quartz Sand in Concrete
• Chapter 13: Civil Engineering
• Prediction of Concrete Constituents’ Behavior Using Internet of Things (IoT)
• An Approach for Grading of Soil Corrosiveness: A Case Study in Vicinity of Ring Road-Kathmandu
• Particular Strength Criteria for Microstructural Analysis of Masonry
• Influence of Material Distribution on the Position of Neutral Axis of Functionally Graded Cantilever Beam
• Study on the Manufacturing of Composite Materials Made from Glass Fiber Reinforced Polymer (GFRP) in Indonesia for Use as Lining in Open Channels