3D Printing of Non-Metallic Materials
Heftet /
2021
/ Engelsk
Produktdetaljer
ISBN
9783035715040
Publisert
2021-01-20
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
150 gr
Høyde
240 mm
Bredde
170 mm
Dybde
26 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
514
This volume is the second part of a specialised series on “Additive Manufacturing” consisting of papers published by Trans Tech Publications Inc. during the period of 2018 – 2019. This collection of scientific papers describes a wide range of engineering approaches and solutions in the area of 3D printing technologies of non-metallic materials.
Les mer
<p>Aggregated Book</p>
- Preface
- Chapter 1: Material Extrusion (ME)
- DFAM Based Multi-Material 3D Printing Using Conductive and Flexible Filaments
- Design of Additively Manufactured Lattice Structures for Tissue Regeneration
- The Influence of 3D Printing Parameters on Elastic and Mechanical Characteristics of Polylactide
- Quasi-Static Characterization of Polyamide-Based Discontinuous CFRP Manufactured by Additive Manufacturing and Injection Molding
- Analysis of Problems during 3D Printing Manufacturing Process
- Investigating the Impacts of Heterogeneous Infills on Structural Strength of 3D Printed Parts
- Effect of Processing Parameters on Mechanical Properties of 3D Printed Samples
- Medical Applications of Biomaterials: The Case of Design and Manufacture of Orthopedic Corsets Made of Polylactic Acid by Additive Manufacturing
- 3D Printing of Carbon Fiber Reinforced Plastics and their Applications
- Comparison of Selected Thermoplastic Materials in the Fused Deposition Modeling Process and their Influence on the Dimensional Accuracy of an Orthodontic Upper Teeth Model
- Extrusion Temperature and Flow Rate Effects on Tensile Properties of Additively Processed Poly(Ethylene-co-Trimethylene Terephthalate)
- Observation of Shape and Dimensional Accuracy Changing of Parts in Time Intervals Manufactured by Additive Method Fused Deposition Modeling
- Additive Manufacturing of PA6 with Short Carbon Fibre Reinforcement Using Fused Deposition Modelling
- Influence of Composition on Mechanical Properties of Additively Manufactured Composites Reinforced with Endless Carbon Fibers
- Evaluation of Tensile Properties and Damage of Continuous Fibre Reinforced 3D-Printed Parts
- Anisotropy Evaluation of Different Raster Directions, Spatial Orientations, and Fill Percentage of 3D Printed PETG Tensile Test Specimens
- Chapter 2: Vat Photopolymerization (VPP)
- Fabrication of β-TCP Scaffold with Pre-Designed Internal Pore Architecture by Rapid Prototyping of Mask Projection Stereolithography
- Lithography-Based Ceramic Manufacturing (LCM) for Dental Applications
- Fabrication of Dense Silica Ceramics through a Stereo Lithography-Based Additive Manufacturing
- One Photon 3D Polymerization via Direct Laser Writing
- Three Dimensional Smart Processing by Ultra Violet Laser Lithography of Ceramic Additive Manufacturing
- Chapter 3: Powder Bed Fusion (PBF) and Direct Energy Deposition (DED)
- Build Orientation Influence on some Mechanical Properties of 3D-Printed Polyamide Specimens
- Direct Laser Additive Manufacturing of Ceramics by Powder Deposition
- Preparation of Polymer Powder Layer for Additive Manufacturing Applications Using Vibration Controlled Brass and Glass Nozzles
- Chapter 4: Materials and Technologies of 3D Construction Printing (3DCP)
- Effect of Type of Fiber on Inter-Layer Bond and Flexural Strengths of Extrusion-Based 3D Printed Geopolymer
- Influence of Binder Saturation Level on Compressive Strength and Dimensional Accuracy of Powder-Based 3D Printed Geopolymer
- Technology of 3D Print in Field of Renovation of Architectural Structures and Historical Buildings
- On the Question of Mix Composition Selection for Construction 3D Printing
- Limits and Potential of 3D Printing Technologies for Construction of Concrete Shells
- Rheological Behavior and Mix Design for 3D Printable Cement Paste
- Towards Additive Manufacturing: Pumping Flow Rate with Time-Dependent Material Rheology in 3D Cementitious Material Printing
- The Preparation and Performance of the Cement-Based Concrete 3D Printing Materials
- Effect of Hydrophobic Aerogel Granules on Thermomechanical Properties of Cementitious Composites
- Chapter 5: Hybrid and Complex Technologies, Post-Processing and Machining Processes
- Set-Up of an Experimental Procedure for the Surface Smoothing of FDM Parts through Acetone Vapor
- The Study and Development of Factor Affecting the Smoothness in 3D Printed Part Surface Treatment via Acetone Vapor
- Study of the FDM Parameters of the ABS Parts in the Surface Quality after Machining Operations
- Electrohydrodynamic (EHD) Bioprinting of Polycaprolactone Scaffolds
- 3D Printing of Plain and Gradient Cermets with Efficient Use of Raw Materials
- Direct Digital Manufacturing of Nanocomposites
- Parametric Study on Surface Roughness of Metallized Parts Manufactured by Additive Manufacturing
- Chapter 6: Raw Materials and Mixtures for 3D Printing
- Rosin Based Composites for Additive Manufacturing
- The Exploitation of Polymer Based Nanocomposites for Additive Manufacturing: A Prospective Review
- The Use of Polypropylene and High-Density Polyethylene on Cork Plastic Composites for Large Scale 3D Printing
- Biodegradable Composite Materials Based on Poly(3-Hydroxybutyrate) for 3D Printing Applications
- Tuning of HDPE Properties for 3D Printing
- Investigation and Characterization of New Polyimide Powder for Selective Laser Sintering
- Study on Particle Modified ABS in 3D Printing
- Mechanical Properties of 3D-Printed Wood-Plastic Composites
- Investigating the Void Content, Fiber Content, and Fiber Orientation of 3D Printed Recycled Carbon Fiber
- Comparison of Supermacroporous Polyester Matrices Fabricated by Thermally Induced Phase Separation and 3D Printing Techniques
- Development of Composite Materials for 3d Printing on the Basis of Polyphenylenesulfone
- 3D Liquid Bioprinting of the PCL/β-TCP Scaffolds
- Chapter 7: Applicability Analysis of 3D Printing Technologies
- Using of 3D Printing Technology in Low Cost Prosthetics
- Rapid Prototyping Technology for Special Pressure Vessels
- Research on 3D Printing Forming Technology for Processing Tablet Material
- Failure Observation of 3D-Printed Thrust Bearing Specimens with Inner Defects in Water Conditions
- Failure Observation of 3D-Printed Thrust Bearing Specimens at Cross Section Observations in Dry Conditions
- Investigation of Tribological Characteristics of Polymers Used in Medicine
- Assembly Tool Manufacturing and Optimization for Polylactic Acid Additive Manufacturing
- The Fabrication of Tissue Engineering Scaffolds by Inkjet Printing Technology
- Chapter 8: Equipment Design
- Towards a Conceptual Notion for a Universal Printing Machine
- Adaptive Platforms and Flexible Deposition System for Big Area Additive Manufacturing (BAAM)
- Validation of Material Parameters of Collagen Compositions for the Application as a Bioink
Les mer
Produktdetaljer
ISBN
9783035715040
Publisert
2021-01-20
Utgiver
Trans Tech Publications Ltd; Trans Tech Publications Ltd
Vekt
150 gr
Høyde
240 mm
Bredde
170 mm
Dybde
26 mm
Aldersnivå
P, 06
Språk
Product language
Engelsk
Format
Product format
Heftet
Antall sider
514